| Age | Commit message (Collapse) | Author |
|---|
|
Modify register setting sequence of enabling inline command
to fix issue of random interrupt from push-button.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/9a7a3a66cbcb426487ca6f558f45e922@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Vivobook S 16X IPS needs a quirks-table entry for the internal microphone to function properly.
Signed-off-by: Vyacheslav Frantsishko <itmymaill@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20240626070334.45633-1-itmymaill@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component
and rework codec link") removed the codec entry for the ETDM1_OUT_BE
dai link entirely instead of replacing it with COMP_EMPTY(). This worked
by accident as the remaining COMP_EMPTY() platform entry became the codec
entry, and the platform entry became completely empty, effectively the
same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything
for platform entries.
This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe()
in sound/soc/mediatek/common/mtk-soundcard-driver.c:
for_each_card_prelinks(card, i, dai_link) {
if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF")))
dai_link->platforms->of_node = adsp_node;
else if (!dai_link->platforms->name && !dai_link->platforms->of_node)
dai_link->platforms->of_node = platform_node;
}
where the code expects the platforms array to have space for at least one entry.
Add an COMP_EMPTY() entry so that dai_link->platforms has space.
Fixes: e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240624061257.3115467-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
priv->pdev pointer was set after being used in
fsl_asoc_card_audmux_init().
Move this assignment at the start of the probe function, so
sub-functions can correctly use pdev through priv.
fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the
dev struct, used with dev_err macros.
As priv is zero-initialised, there would be a NULL pointer dereference.
Note that if priv->dev is dereferenced before assignment but never used,
for example if there is no error to be printed, the driver won't crash
probably due to compiler optimisations.
Fixes: 708b4351f08c ("ASoC: fsl: Add Freescale Generic ASoC Sound Card with ASRC support")
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240620132511.4291-2-elinor.montmasson@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
chip->flag variable assignment will be skipped when acp platform device
creation is skipped. In this case chip>flag value will not be set.
chip->flag variable should be assigned along with other structure
variables for 'chip' structure. Move chip->flag variable assignment
prior to acp platform device creation.
Fixes: 3a94c8ad0aae ("ASoC: amd: acp: add code for scanning acp pdm controller")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ACP supports different pin configurations for I2S IO. Checking ACP pin
configuration value against specific value breaks the functionality for
other I2S pin configurations. This check is no longer required in i2s dai
driver probe call as i2s configuration check will be verified during acp
platform device creation sequence.
Remove i2s_mode check in acp_i2s_probe() function.
Fixes: b24484c18b10 ("ASoC: amd: acp: ACP code generic to support newer platforms")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When acp platform device creation is skipped, chip->chip_pdev value will
remain NULL. Add NULL check for chip->chip_pdev structure in
snd_acp_resume() function to avoid null pointer dereference.
Fixes: 088a40980efb ("ASoC: amd: acp: add pm ops support for acp pci driver")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Dell SKU 0C64 has a single rt1318 amplifier.
The prefix name of control still needs to be set rt1318-1 corresponding to UCM config.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240612075740.1678082-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is an issue around with error handling and graph management with
the exising code, none of the error paths close the graph, which result in
leaving the loaded graph in dsp, however the driver thinks otherwise.
This can have a nasty side effect specially when we try to load the same
graph to dsp, dsp returns error which leaves the board with no sound and
requires restart.
Fix this by properly closing the graph when we hit errors between
open and close.
Fixes: 30ad723b93ad ("ASoC: qdsp6: audioreach: add q6apm lpass dai support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # X13s
Link: https://lore.kernel.org/r/20240613-q6apm-fixes-v1-1-d88953675ab3@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the ASP1 DAI is hooked up by the machine driver the ASP TX mixer
sources should be initialized to disconnected. There aren't currently
any available products using the ASP so this doesn't affect any
existing systems.
The cs35l56 does not have any fixed default for the mixer source
registers. When the cs35l56 boots, its firmware patches these registers
to setup a system-specific routing; this is so that Windows can use
generic SDCA drivers instead of needing knowledge of chip-specific
registers. The setup varies between end-products, which each have
customized firmware, and so the default register state varies between
end-products. It can also change if the firmware on an end-product is
upgraded - for example if a change was needed to the routing for Windows
use-cases. It must be emphasized that the settings applied by the
firmware are not internal magic tuning; they are statically implementing
use-case setup that on Linux would be done via ALSA controls.
The driver is currently syncing the mixer controls with whatever
initial state the firmware wrote to the registers, so that they report
the actual audio routing. But if the ASP DAI is hooked up this can create
a powered-up DAPM graph without anything intentionally setting up a path.
This can lead to parts of the audio system powering up unexpectedly.
For example when cs35l56 is connected to cs42l43 using a codec-codec link,
this can create a complete DAPM graph which then powers-up cs42l43. But
the cs42l43 can only be clocked from its SoundWire bus so this causes a
bunch of errors in the kernel log where cs42l43 is unexpectedly powered-up
without a clock.
If the host is taking ownership of the ASP (either directly or as a
codec-to-codec link) there is no need to keep the mixer settings that the
firmware wrote. The driver has ALSA controls for setting these using
standard Linux mechanisms. So if the machine driver hooks up the ASP the
ASP mixers are initialized to "None" (no input). This prevents unintended
DAPM-graph power-ups, and means the initial state of the mixers is
always going to be None.
Since the initial state of the mixers can vary from system to system and
potentially between firmware upgrades, no use-case manager can currently
assume that cs35l56 has a known initial state. The firmware could just as
easily default them to "None" as to any input source. So defaulting them
to "None" in the driver is not increasing the entropy of the system.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240613132527.46537-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It was reported that recent fix for memory corruption during topology
load, causes corruption in other cases. Instead of being overeager with
checking topology, assume that it is properly formatted and just
duplicate strings.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Closes: https://lore.kernel.org/linux-sound/171812236450.201359.3019210915105428447.b4-ty@kernel.org/T/#m8c4bd5abf453960fde6f826c4b7f84881da63e9d
Suggested-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240613090126.841189-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add debounce time in headset type detection for better performance.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/7e502e9a9dd94122a1b60deb5ceb60fb@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the ipc_prepare() callback fails for a module instance, on error rewind
we must skip the ipc_unprepare() call for ones that has positive use count.
The positive use count means that the module instance is in active use, it
cannot be unprepared.
The issue affects capture direction paths with branches (single dai with
multiple PCMs), the affected widgets are in the shared part of the paths.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240612121203.15468-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Jai Luthra <j-luthra@ti.com>:
This series fixes two patches:
1. Fix the dmaengine API usage by calling dmaengine_synchronize() after
dmaengine_terminate_async() when xrun events occur in application
2. Use the McASP AFIFO property from DT to refine the period size,
instead of hardcoding minimum to 64 samples
|
|
Set driver name to "HDMI". This simplifies the code and gets rid of
the following error messages:
ASoC: driver name too long 'HDMI 58040000.encoder' -> 'HDMI_58040000_e'
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240610125847.773394-1-primoz.fiser@norik.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The minimum period size was enforced to 64 as older devices integrating
McASP with EDMA used an internal FIFO of 64 samples.
With UDMA based platforms this internal McASP FIFO is optional, as the
DMA engine internally does some buffering which is already accounted for
when registering the platform. So we should read the actual FIFO
configuration (txnumevt/rxnumevt) instead of hardcoding frames.min to
64.
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-2-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sometimes the stream may be stopped due to XRUN events, in which case
the userspace can call snd_pcm_drop() and snd_pcm_prepare() to stop and
start the stream again.
In these cases, we must wait for the DMA channel to synchronize before
marking the stream as prepared for playback, as the DMA channel gets
stopped by drop() without any synchronization. Make sure the ALSA core
synchronizes the DMA channel by adding a sync_stop() hook.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-1-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Originally reported here:
https://github.com/thesofproject/avs-topology-xml/issues/22#issuecomment-2127892605
There is various level of failure there, first of all when topology
loads routes, it points directly into FW file, but it may be freed after
topology load. After fixing the above, when avs driver parses topology
it should allocate its own memory, as target strings can be shorter than
needed. Also clean up soc_tplg_dapm_graph_elems_load() a bit.
|
|
When headphones are plugged in, they appear absent; when they are removed,
they appear present.
Add a specific entry in bytcr_rt5640 for this device
Signed-off-by: Thomas GENTY <tomlohave@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240608170251.99936-1-tomlohave@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Instead of using very long macro name, assign it to shorter variable
and use it instead. While doing that, we can reduce multiple if checks
using this define to one.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240603102818.36165-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The routes are allocated with kzalloc(), so all fields are zeroed by
default, skip unnecessary assignments.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240603102818.36165-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Instead of overriding existing memory strings that may be too short,
just allocate needed memory and point the route at it.
Reported-by: Jason Montleon <jmontleo@redhat.com>
Link: https://github.com/thesofproject/avs-topology-xml/issues/22#issuecomment-2127892605
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240603102818.36165-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Most users after parsing a topology file, release memory used by it, so
having pointer references directly into topology file contents is wrong.
Use devm_kmemdup(), to allocate memory as needed.
Reported-by: Jason Montleon <jmontleo@redhat.com>
Link: https://github.com/thesofproject/avs-topology-xml/issues/22#issuecomment-2127892605
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240603102818.36165-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The removed dai_link->platform component cause a fail which
is exposed at runtime. (ex: when a sound tool is used)
This patch re-adds the dai_link->platform component to have
a full card registered.
Before this patch:
:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CLASSD [CLASSD], device 0: CLASSD PCM snd-soc-dummy-dai-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
:~$ speaker-test -t sine
speaker-test 1.2.6
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Sine wave rate is 440.0000Hz
Playback open error: -22,Invalid argument
After this patch which restores the platform component:
:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CLASSD [CLASSD], device 0: CLASSD PCM snd-soc-dummy-dai-0
[CLASSD PCM snd-soc-dummy-dai-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
-> Resolve the playback error.
Fixes: 2f650f87c03c ("ASoC: atmel: remove unnecessary dai_link->platform")
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/20240604101030.237792-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since "Headphone Switch" kcontrol name has already been used by da7219,
rename the control name from "Headphone" to "Headphones" to prevent the
colision. Also, this change makes kcontrol name align with the one in
mt8186-mt6366-da7219-max98357.c.
Fixes: 9c7388baa2053 ("ASoC: mediatek: mt8183-da7219-max98357: Map missing jack kcontrols")
Change-Id: I9ae69a4673cd04786b247cc514fdd20f878ef009
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://msgid.link/r/20240531-da7219-v1-1-ac3343f3ae6a@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When TRCM mode is enabled, I2S RX and TX clocks are synchronized through
selected clock source. Without this fix BCLK and LRCK might get parented
to an uninitialized MCLK and the DAI will receive data at wrong pace.
However, unlike in original i2s-tdm driver, there is no need to manually
synchronize mclk_rx and mclk_tx, as only one gets used anyway.
Tested on a board with RK3568 SoC and Silergy SY24145S codec with enabled and
disabled TRCM mode.
Fixes: 9e2ab4b18ebd ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates")
Signed-off-by: Alibek Omarov <a1ba.omarov@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://msgid.link/r/20240604184752.697313-1-a1ba.omarov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The sof_ipc4_dma_config_tlv() call makes no sense in case of DSPless
mode since it is a configuration for the firmware.
|
|
When switching between OMTP and CTIA headset, we can hear pop noise.
To solve this issue, We modified the configuration for headphone detection
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240604021946.2911-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some problematic headsets have been discovered, to help with correctly
identifying these, the detect time must be increased. Also improve the
reliability of the impedance value from the button detect by slightly
increasing the button detect delay.
Fixes: 686b8f711b99 ("ASoC: cs42l43: Lower default type detect time")
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240604132843.3309114-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/qcom/snd-soc-qcom-sdw.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/r/20240603-md-snd-soc-qcom-sdw-v1-1-101ea8bcdd38@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Including silence detection register as volatile.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://msgid.link/r/c66a6bd6d220426793096b42baf85437@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/fsl/imx-pcm-dma.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/r/20240602-md-snd-fsl-imx-pcm-dma-v1-1-e7efc33c6bf3@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/mxs/snd-soc-mxs-pcm.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/r/20240602-md-snd-soc-mxs-pcm-v1-1-1e663d11328d@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We just return 0 after the skip_tlv label. No need to use a label.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240603073224.14726-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sof_ipc4_dma_config_tlv{} is for Audio DSP firmware only.
Don't set it in dspless mode.
Fixes: 17386cb1b48b ("ASoC: SOF: Intel: hda-dai: set dma_stream_channel_map device")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240603073224.14726-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The existing logic to pick a DMIC blob is based on several historical
assumptions that the NHLT in BIOS always contains 32-bits per sample
type (first patch, [1]).
The other issue with the existing logic is that it was designed to care only
about the bit depth of the format and fails to find the existing and correct
blob when rate/channels are different on the FE side compared to what we should
be using on the DAI side (we have components in path which can change
rate/channel count).
These issues have not been observed in past but with new MTL based (Windows)
laptops and new topologies to enhance the audio quality, we started to see weird
issues around how our assumptions of vendors failed.
Since some NHLT blob handling cleanup has been done for 6.10, this series will
complete that work to cover even cases that we don't anticipate to see.
[1] https://github.com/thesofproject/linux/issues/4973
|
|
Currently we only check the bit depth value among to DAI formats, but other
parameters might be constant, like number of channels and/or rate.
In capture we use the fe params as a reference to find the format and blob
which should be used, but in the path we can have components which can
handle expanding/narrowing number of channels or do a resample.
In these cases the topology is expected to have 'fixed' parameter for
channels/rates/bit depth and the conversion to the fe format is going to
be done within the path.
In practice this patch fixes issues like:
All DMIC formats are fixed four channels
We have a component which converts the four channel to stereo
FE is opened with 2 channel
Even if we have the correct bit depth format and blob (for four channel) we
will still be looking for stereo configurations, which will fail.
Note: the adjustment of params have switched order with the checking of
single bit depth (needed for the NHLT blob fallback support). This change
is non function, just that if the sof_ipc4_narrow_params_to_format() would
fail, there is no point of checking the single bit depth.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove the duplicated code paths to check for single bit depth and to
update the params with storing the parameters needed by the function and
have a single code section.
No functional change but the code is easier to follow.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename the sof_ipc4_copier_is_single_format() to
sof_ipc4_copier_is_single_bitdepth() to clear the confusion of the use of
'format' when we are querying information on the bit depth.
Format is used to describe a combination of parameters (rate, channels,
sample format / bit depth).
Rename the flags used to store the result at the same time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sof_ipc4_dbg_audio_format
Print out the number of channels for the format explicitly instead of
having the reader to understand how to interpret the ch_map and ch_cfg
values.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ACPI NHLT table always had 32-bit DMIC blob even if 16-bit was also
present and taken as a 'rule' which obviously got broken and there is at
least one device on the market which ships with only 16-bit DMIC
configuration blob.
This corner case has never been supported and it is going to need topology
updates for DMIC copier to support multiple formats.
As for the kernel side: if the copier supports multiple formats and the
preferred 32-bit DMIC blob is not found then we will try to get a 16-bit
DMIC configuration and look for a 16-bit copier config.
Fixes: f9209644ae76 ("ASoC: SOF: ipc4-topology: Correct DAI copier config and NHLT blob request")
Link: https://github.com/thesofproject/linux/issues/4973
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
'make W=1' now reports missing MODULE_DESCRIPTION lines. This patchset
cleans-up all the module definitions and adds MODULE_DESCRIPTION lines
as needed.
|
|
base extension
If a process module does not have base config extension then the same
format applies to all of it's inputs and the process->base_config_ext is
NULL, causing NULL dereference when specifically crafted topology and
sequences used.
Fixes: 648fea128476 ("ASoC: SOF: ipc4-topology: set copier output format for process module")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://msgid.link/r/20240529121201.14687-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The addition of the Cirrus Logic 'sidecar' amps adds a dependency on SPI_MASTER.
Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for SND_SOC_CS35L56_SPI
Depends on [n]:
SOUND [=y] && SND [=y] && SND_SOC [=y] && SPI_MASTER [=n] &&
(SOUNDWIRE [=y] || !SOUNDWIRE [=y])
Selected by [y]:
- SND_SOC_INTEL_SOUNDWIRE_SOF_MACH [=y] && SOUND [=y] && SND [=y]
&& SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] &&
SND_SOC_SOF_INTEL_SOUNDWIRE [=y] && I2C [=y] && ACPI [=y] &&
(MFD_INTEL_LPSS [=y] || COMPILE_TEST [=n]) &&
(SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES [=y] || COMPILE_TEST
[=n]) && SOUNDWIRE [=y]
Fixes: b831b4dca48d ("ASoC: intel: sof_sdw: Add support for cs42l43-cs35l56 sidecar amps")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405140758.o2HY4nYD-lkp@intel.com/
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240527191940.30107-1-pierre-louis.bossart@linux.intel.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
MODULE_DESCRIPTION() was optional until it became mandatory and
flagged as an error by 'make W=1'.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240527194414.166156-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Follow the arbitrary Intel convention order to allow for easier grep.
MODULE_LICENSE
MODULE_DESCRIPTION
MODULE_IMPORT
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240527194414.166156-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The module information is spread across files, group in a single
location. For maintenability and alignment, the arbitrary Intel
convention is used with the following order:
MODULE_LICENSE
MODULE_DESCRIPTION
MODULE_IMPORT
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240527194414.166156-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This file is part of the snd-sof module, there's no reason to re-add the
MODULE_LICENSE here.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240527194414.166156-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
wm_adsp is built as a separate module and as such should include a
MODULE_DESCRIPTION() macro.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240527100237.430240-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SoundWire interface can always support 44.1kHz using flow controlled
mode, and whether the ASP is in master mode should obviously only affect
the ASP. Update cs42l43_startup() to only restrict the rates for the ASP
DAI.
Fixes: fc918cbe874e ("ASoC: cs42l43: Add support for the cs42l43")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240527100840.439832-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
