summaryrefslogtreecommitdiff
path: root/sound/soc/samsung/speyside.c
AgeCommit message (Collapse)Author
2012-12-10ASoC: Samsung: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-07ASoC: Samsung: Do not register samsung audio dma device as pdevPadmavathi Venna
Previously, the ASoC 'platform' (PCM/DMA) object was instantiated via a platform_device. This didn't represent the hardware well, since there was no separate hardware associated with this platform_device; it was a virtual device with sole purpose to call snd_soc_register_platform(). This change removes the platform_device completely. Each Samsung DAI now registers the ASoC 'platform' itself. Machine drivers are adjusted for the new 'platform' name. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25ASoC: samsung: Add hookup of WM0010 on SpeysideMark Brown
The Speyside platform by default has a WM0010 fitted. Now that we have a public driver hook it up in the machine integration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-16ASoC: Use dai_fmt in SpeysideMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-22ASoC: samsung: Add .owner to struct snd_soc_cardAxel Lin
Missed .owner of struct snd_soc_card will prevent the module from being removed from underneath its users. Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-12ASoC: Raise Speyside audio system clock rate to 512fsMark Brown
To support advanced system functionality for additional components; the actively used clocks will remain the same for current components. Also factor the rate out to a single #define while we're at it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-27Merge branch 'for-3.2' into for-3.3Mark Brown
2011-11-27ASoC: Correct name of Speyside Main Speaker widgetMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-25ASoC: Convert Samsung directory to module_platform_driverMark Brown
Saves some boilerplate code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com>
2011-11-23ASoC: Add fully_routed flag to Speyside machinesMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-31sound: Add module.h to the previously silent sound usersPaul Gortmaker
Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-19ASoC: Add line loads to the list of supported detections for SpeysideMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-31ASoC: Allow source specification for CODEC level sysclkMark Brown
Similarly to PLLs/FLLs some modern CODECs provide selectable system clock sources. When the clock is the clock for a DAI we do not usually need to identify which clock is being configured so can use clk_id for the source clock but with CODEC wide system clocks we will need to specify both the clock being configured and the source. Add a source argument to the CODEC driver set_sysclk() operation to reflect this. As this operation is not as widely used as the DAI set_sysclk() operation the change is not very invasive. We probably ought to go and make the same alternation for DAIs at some point. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-12ASoC: Allow userspace control of Speyside headphone outputMark Brown
In order to facilitate the widest range of use cases (especially things like speakerphone) allow the headphone output to be enabled and disabled by the application layer. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-08ASoC: Rename WM8915 to WM8996Mark Brown
For marketing reasons the part will be called WM8996. In order to avoid user confusion rename the driver to reflect this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-08ASoC: Fix mismerge of Speyside set_bias_level_post()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-06ASoC: Manage Speyside system clocking only in bias managementMark Brown
Now that the CODEC driver supports it defer configuration of the system clock until bias management which is a much more idiomatic place to do system power control and makes things a lot more happy when we're using both interfaces. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-06ASoC: Add context parameter to card DAPM callbacksMark Brown
The card callback will get called for each DAPM context in the card so it can be useful for it to know which device is currently undergoing a transition. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-01ASoC: Update speyside audio driver for hardware revision 2Mark Brown
Revision 2 of the Speyside platform supplies a 32kHz clock on MCLK2 rather than MCLK1. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-27ASoC: Don't specify the DMA driver for Speyside baseband linkMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Mark Speyside widgets as ignoring suspendMark Brown
Allow audio paths through the Speyside system to be kept active while the system is suspended (for example, when on a voice call) by marking all the external widgets and the DAI link to the WM1250-EV1 baseband module as ignoring suspend. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Add stub baseband link on SpeysideMark Brown
Demonstrate the connection of a baseband to the system. We add a DAI for the link to the baseband. This will become visible to the application layer - audio should be started from the application layer using an application such as this: http://opensource.wolfsonmicro.com/~gg/bluetooth-pcm/bluetooth_pcm.c which starts up audio as for CPU based playback and record up to the point where data is streamed. Due to non-availability of baseband simulation hardware we reuse the configuration for the CPU link with the CODEC acting as clock master, allowing signals to be observed with a scope. A more standard system would have separate configuration for the baseband with its own ops structure and operations. Normally the baseband would be clock master as the baseband audio will be synchronised to the external telephony network. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Add pin switches for fixed analogue inputs and outputs on SpeysideMark Brown
Pin switches enable direct control of the DAPM state from userspace, enabling simple enabling and disabling of the path. This is especially useful for outputs such as the speaker which are composed of several physical devices as it allows them to be controlled as a group. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Add Speyside headset jack detection supportMark Brown
Speyside makes use of support the WM8915 has for detecting the polarity of the microphone and ground connections on headsets, using a GPIO to control the polarity of the ground connection and switching between the two microphone bias supplies available on the device in order to do so. As a result of this the detection support is more involved than for most other CODECs, using a callback to configure the current polarity of the jack and translate this into the board-specific connections required for the current scenario. On Android some additional work is required to hook this up to the application layer as the Android HeadsetObserver monitors a custom drivers/switch API rather than the standard Linux APIs. This can be done by either updating HeadsetObserver or modifying the ALSA core to report via drivers/switch as well. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Support the sub speaker driver on SpeysideMark Brown
Speyside includes a WM9081 configured as an external speaker driver taking an analogue input from HPOUT2 on the WM8915 on the system. Add support for this to the driver, using a prefix of "Sub" for the WM9081 controls to ensure we avoid collisions with controls on the WM8915. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Optimise clock management for WM8915 SpeysideMark Brown
Dynamically enable and disable the FLL on the WM8915, configuring the system clock to 256fs for 48kHz when the device is active but reverting to using the input 32.768kHz clock directly at other times to support features such as jack detection with minimal power consumption. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Add basic widgets for WM8915 SpeysideMark Brown
Provide widgets for the basic widgets connected directly to the WM8915 on Speyside - the headphones, speaker, digital and analogue microphones. For the outputs this is just documentation, for the inputs this ensures that the relevant microphone biases are enabled when they are in use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Initial audio support for Speyside on Cragganmore 6410Mark Brown
This is minimal code required to get audio out of the Speyside audio subsystem on the Wolfson Cragganmore 6410 reference platform. It sets up the link between the CPU and AIF1 of the WM8915 on the system, enabling audio playback via the headphone and speaker outputs of the device (which require no further configuration except runtime). It allows verification of basic functionality of the system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-20 19:50:08 +0000