summaryrefslogtreecommitdiff
path: root/sound/soc/atmel
AgeCommit message (Collapse)Author
2018-05-29ASoC: atmel-i2s: add driver for the new Atmel I2S controllerCyrille Pitchen
This patch adds support for the Atmel I2S controller embedded into sama5d2x SoCs. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-19ASoC: atmel: simplify getting .drvdataWolfram Sang
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-16ASoC: atmel_ssc_dai: fix spelling mistake: "Stoping" -> "Stopping"Colin Ian King
Trivial fix to spelling mistake in pr_debug message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-28Merge remote-tracking branches 'asoc/topic/arizona', 'asoc/topic/atmel', ↵Mark Brown
'asoc/topic/bd28623', 'asoc/topic/blackfin' and 'asoc/topic/bt-sco' into asoc-next
2018-03-01ASoC: atmel: Remove redundant dev_err() call in probe functionLadislav Michl
There is an error message within devm_ioremap_resource already, so remove the redundant dev_err() call. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: atmel: replace platform to componentKuninori Morimoto
Now platform can be replaced to component, let's do it. To avoid complex operation, this patch adds device pointer to atmel_classd. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: atmel-classd: replace codec to componentKuninori Morimoto
Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: atmel-pdmic: replace codec to componentKuninori Morimoto
Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-07Merge remote-tracking branches 'asoc/topic/sam9x5_wm8731', ↵Mark Brown
'asoc/topic/sgtl5000' and 'asoc/topic/sun8i-codec' into asoc-next
2018-02-07Merge remote-tracking branches 'asoc/topic/max98373', 'asoc/topic/mtk', ↵Mark Brown
'asoc/topic/pcm', 'asoc/topic/rockchip' and 'asoc/topic/sam9g20_wm8731' into asoc-next
2018-01-22ASoC: sam9x5_wm8731: Drop 'ASoC' prefix from error messagesLadislav Michl
dev_err already provides messages with prefix, so drop 'ASoC' prefix. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-22ASoC: sam9g20_wm8731: use dev_*() logging functionsLadislav Michl
Use dev_*() logging functions instead of plain printk and as messages are now properly prefixed drop 'ASoC' prefix as well. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-12Merge remote-tracking branches 'asoc/topic/88pm860x', 'asoc/topic/amd', ↵Mark Brown
'asoc/topic/atmel', 'asoc/topic/codecs' and 'asoc/topic/compress' into asoc-next
2017-12-08ASoC: atmel-classd: select correct Kconfig symbolAlexandre Belloni
SND_ATMEL_SOC_CLASSD selects SND_ATMEL_SOC_DMA but the driver itself handles its own DMA operations and doesn't need anything from atmel-pcm-dma.c or atmel_ssc_dai.c. Replace SND_ATMEL_SOC_DMA by SND_SOC_GENERIC_DMAENGINE_PCM which is the only one actually required. This may end up in a configuration leading to a link error: sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_set_audio': atmel_ssc_dai.c:(.text+0x79c): undefined reference to `atmel_pcm_dma_platform_register' atmel_ssc_dai.c:(.text+0x79c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `atmel_pcm_dma_platform_register' sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_put_audio': atmel_ssc_dai.c:(.text+0xf24): undefined reference to `atmel_pcm_dma_platform_unregister' atmel_ssc_dai.c:(.text+0xf24): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `atmel_pcm_dma_platform_unregister' Tested on sama5d2 xplained with the following configuration where nothing selects SND_ATMEL_SOC_DMA: CONFIG_SND_ATMEL_SOC=y CONFIG_SND_ATMEL_SOC_CLASSD=y Reported-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Arnd Bergmann <arnd@arndb.de> Fixes: e0a25b6d1862 ("ASoC: atmel-classd: add the Audio Class D Amplifier") Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-04ASoC: use snd_soc_component_init_regmap() on atmel-classdKuninori Morimoto
To setup regmap, ALSA SoC has snd_soc_component_init_regmap() and .get_regmap. But these are duplicated feature. This driver is using .get_regmap and set regmap by using dev_get_regmap(), but it is automatically done by snd_soc_component_add_unlocked(). let's remove .get_regmap. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The diff is dominated by the Allwinner A10/A20 SoCs getting converted to the sunxi-ng framework. Otherwise, the heavy hitters are various drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other new clk drivers in here too but overall this is just a bunch of clk drivers for various different pieces of hardware and a collection of non-critical fixes for clk drivers. New Drivers: - Allwinner R40 SoCs - Renesas R-Car Gen3 USB 2.0 clock selector PHY - Atmel AT91 audio PLL - Uniphier PXs3 SoCs - ARC HSDK Board PLLs - AXS10X Board PLLs - STMicroelectronics STM32H743 SoCs Removed Drivers: - Non-compiling mb86s7x support Updates: - Allwinner A10/A20 SoCs converted to sunxi-ng framework - Allwinner H3 CPU clk fixes - Renesas R-Car D3 SoC - Renesas V2H and M3-W modules - Samsung Exynos5420/5422/5800 audio fixes - Rockchip fractional clk approximation fixes - Rockchip rk3126 SoC support within the rk3128 driver - Amlogic gxbb CEC32 and sd_emmc clks - Amlogic meson8b reset controller support - IDT VersaClock 5P49V5925/5P49V6901 support - Qualcomm MSM8996 SMMU clks - Various 'const' applications for struct clk_ops - si5351 PLL reset bugfix - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2 - Assorted Tegra clk driver fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits) clk: si5351: fix PLL reset ASoC: atmel-classd: remove aclk clock ASoC: atmel-classd: remove aclk clock from DT binding clk: at91: clk-generated: make gclk determine audio_pll rate clk: at91: clk-generated: create function to find best_diff clk: at91: add audio pll clock drivers dt-bindings: clk: at91: add audio plls to the compatible list clk: at91: clk-generated: remove useless divisor loop clk: mb86s7x: Drop non-building driver clk: ti: check for null return in strrchr to avoid null dereferencing clk: Don't write error code into divider register clk: uniphier: add video input subsystem clock clk: uniphier: add audio system clock clk: stm32h7: Add stm32h743 clock driver clk: gate: expose clk_gate_ops::is_enabled clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled() clk: uniphier: add PXs3 clock data clk: hi6220: change watchdog clock source clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 clk: cs2000: Add cs2000_set_saved_rate ...
2017-09-01ASoC: atmel-classd: remove aclk clockQuentin Schulz
Since gclk (generated-clk) is now able to determine the rate of the audio_pll, there is no need for classd to have a direct phandle to the audio_pll while already having a phandle to gclk. Thus, remove all mentions to aclk in classd driver and update macros and variable names. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-21ASoC: atmel: Remove unnecessary function callDonglin Peng
The function platform_set_drvdata copies the value the variable card to card->dev->driver_data, then the address of &pdev->dev is assigned to card->dev in atmel_pdmic_asoc_card_init, but when calling snd_soc_register_card,the function dev_set_drvdata(card->dev, card) will do the same copy operation, so i think that the former copy operation can be removed. Signed-off-by: Peng Donglin <dolinux.peng@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-21ASoC: atmel: Remove unnecessary function callDonglin Peng
The function platform_set_drvdata copies the value the variable card to card->dev->driver_data, then the address of &pdev->dev is assigned to card->dev in atmel_classd_asoc_card_init, but when calling snd_soc_register_card,the function dev_set_drvdata(card->dev, card) will do the same copy operation, so i think that the former copy operation can be removed. Signed-off-by: Peng Donglin <dolinux.peng@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-03Merge remote-tracking branches 'asoc/topic/ak4613', 'asoc/topic/ak4642', ↵Mark Brown
'asoc/topic/atmel', 'asoc/topic/cs35l34' and 'asoc/topic/cs35l35' into asoc-next
2017-06-06ASoC: atmel: tse850: fix off-by-one in the "ANA" enumeration countPeter Rosin
At some point I added the "Low" entry at the beginning of the array without bumping the enumeration count from 9 to 10. Fix this. While at it, fix the anti-pattern for the other enumeration (used by MUX{1,2}). Fixes: aa43112445f0 ("ASoC: atmel: tse850: add ASoC driver for the Axentia TSE-850") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2017-05-17ASoC: atmel-classd: sync regcache when resumingQuentin Schulz
The PM functions used in this driver are the ones defined in sounc/soc/soc-core.c. When suspending (using snd_soc_suspend), the regcache is marked dirty but is never synced on resume. Sync regcache on resume of Atmel ClassD device. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-17ASoC: atmel: Use IS_ENABLED()Takashi Iwai
Simplify the ifdef conditions with IS_ENABLED() macro. No functional changes. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: atmel-classd: fix audio clock rateSongjun Wu
Fix the audio clock rate according to the datasheet. Reported-by: Dushara Jayasinghe <dushara@successful.com.au> Signed-off-by: Songjun Wu <songjun.wu@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-12-15ASoC: atmel: tse850: rely on the ssc to register as a cpu dai by itselfPeter Rosin
This breaks devicetree compatibility, but in this case that is ok. All affected units are either on my desk, or running an even older version of the driver that is not compatible with the upstreamed version anyway (and when these other units are eventually updated, they will get a fresh dtb as well, so that is not a significant problem either). All of that is of course assuming that noone else has managed to build something that can use this driver, but that seems extremely improbable. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-16ASoC: atmel: tse850: add ASoC driver for the Axentia TSE-850Peter Rosin
The TSE-850 is an FM Transmitter Station Equipment, designed to generate baseband signals for FM, mainly the DARC subcarrier, but other signals are also possible. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-16ASoC: atmel_ssc_dai: if not provided, default to sensible dividersPeter Rosin
When this driver masters BCLK and/or LRCLK, and noone has stated differently, assume that all the bits of a frame are used. This relieves the cpu dai users from the duty to fill in the dividers for the common case. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24ASoC: atmel_wm8904: constify snd_soc_ops structuresJulia Lawall
Check for snd_soc_ops structures that are only stored in the ops field of a snd_soc_dai_link structure. This field is declared const, so snd_soc_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_soc_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_dai_link e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i, e; position p; @@ struct snd_soc_dai_link e[] = { ..., { .ops = &i@p, }, ..., }; @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_soc_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_soc_ops i = { ... }; // </smpl> The effect on the layout of the .o file is shown by the following output of the size command, first before then after the transformation: text data bss dec hex filename 2611 1536 0 4147 1033 sound/soc/atmel/atmel_wm8904.o 2675 1480 0 4155 103b sound/soc/atmel/atmel_wm8904.o Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-29Merge remote-tracking branches 'asoc/topic/ac97', 'asoc/topic/ak4104', ↵Mark Brown
'asoc/topic/arizona', 'asoc/topic/atmel' and 'asoc/topic/codec-component' into asoc-next
2016-09-29Merge remote-tracking branch 'asoc/topic/pcm' into asoc-nextMark Brown
2016-09-12ASoC: constify snd_pcm_ops structuresJulia Lawall
Check for snd_pcm_ops structures that are only stored in the ops field of a snd_soc_platform_driver structure or passed as the third argument to snd_pcm_set_ops. The corresponding field or parameter is declared const, so snd_pcm_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_pcm_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_platform_driver e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i; expression e1, e2; position p; @@ snd_pcm_set_ops(e1, e2, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_pcm_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_pcm_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-16ASoC: atmel-pdmic: Fix typos in comments and error messagesPeter Meerwald-Stadler
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-16ASoC: atmel_ssc_dai: Don't unconditionally reset SSC on stream startupChristoph Huber
commit cbaadf0f90d6 ("ASoC: atmel_ssc_dai: refactor the startup and shutdown") refactored code such that the SSC is reset on every startup; this breaks duplex audio (e.g. first start audio playback, then start record, causing the playback to stop/hang) Fixes: cbaadf0f90d6 (ASoC: atmel_ssc_dai: refactor the startup and shutdown) Signed-off-by: Christoph Huber <c.huber@bct-electronic.com> Signed-off-by: Peter Meerwald-Stadler <p.meerwald@bct-electronic.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-08-11ASoC: atmel-pdmic: add missing clk_disable_unprepare() on error in ↵Wei Yongjun
atmel_pdmic_cpu_dai_startup() Add the missing clk_disable_unprepare() before return from atmel_pdmic_cpu_dai_startup() in the error handling case. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-11ASoC: atmel-pdmic: mark symbols static where possibleBaoyou Xie
We get 1 warning about global functions without a declaration in the ASoC atmel-pdmic driver when building with W=1: sound/soc/atmel/atmel-pdmic.c:286:5: warning: no previous prototype for 'pdmic_get_mic_volsw' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks it 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: codec duplicated callback function goes to component on atmel-pdmicKuninori Morimoto
codec driver and component driver has duplicated callback functions, and codec side functions are just copied to component side when register timing. This was quick-hack, but no longer needed. This patch moves these functions from codec driver to component driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: codec duplicated callback function goes to component on atmel-classdKuninori Morimoto
codec driver and component driver has duplicated callback functions, and codec side functions are just copied to component side when register timing. This was quick-hack, but no longer needed. This patch moves these functions from codec driver to component driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-07ASoC: atmel_ssc_dai: Fix DMA params for different SSCPeter Meerwald
follow-up patch from c706f2e55f ASoC: atmel_ssc_dai: distinguish the different SSC cpu_dai id is always 0, use platform_device id to distinguish DMA parameters of SSCs Signed-off-by: Peter Meerwald-Stadler <p.meerwald@bct-electronic.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-04ASoC: atmel-pdmic: Simplify use of devm_ioremap_resourceAmitoj Kaur Chawla
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. The Coccinelle semantic patch that makes this change is as follows: // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-04ASoC: Atmel: ClassD: Simplify use of devm_ioremap_resourceAmitoj Kaur Chawla
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. The Coccinelle semantic patch that makes this change is as follows: // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-06ASoC: atmel: fix build failureSudip Mukherjee
m32r allmodconfig build is failing with the error: ERROR: "bad_dma_ops" [sound/soc/atmel/snd-soc-atmel-pcm-pdc.ko] undefined! The code is using DMA but the related dependency is not mentioned in the Kconfig. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-27ASoC: atmel_ssc_dai: read DSP mode A data on rising edges of bclkPeter Rosin
Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02ASoC: atmel_ssc_dai: distinguish the different SSCSongjun Wu
Cpu_dai id always equals 0, can't distinguish the different SSC. Use platform_device id to record and distinguish the different SSC. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-23Merge remote-tracking branches 'asoc/topic/atmel-classd', 'asoc/topic/const' ↵Mark Brown
and 'asoc/topic/da7218' into asoc-next
2015-12-23ASoC: atmel_wm8904: add snd_soc_pm_opsSongjun Wu
Sometimes the audio play can not be resumed after it is suspended. Add snd_soc_pm_ops to execute power management operations, then this issue is fixed. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: atmel-pdmic: add the Pulse Density Modulation Interface ControllerSongjun Wu
Add driver for the Pulse Density Modulation Interface Controller. It comes with digitallly controlled gain, a High-Pass and a SINCC filter. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-12ASoC: Atmel: ClassD: unregister codec when error occursSongjun Wu
Add code to unregister codec in probe function, when the error occurs after the codec is registered. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-20ASoC: Atmel: ClassD: supports mono audioSongjun Wu
Modify the code to support mono audio. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-26Merge remote-tracking branches 'asoc/topic/atmel-classd' and ↵Mark Brown
'asoc/topic/da7213' into asoc-next