| Age | Commit message (Collapse) | Author |
|---|
|
The ALSA control code expects that the range of assigned indices to a control is
continuous and does not overflow. Currently there are no checks to enforce this.
If a control with a overflowing index range is created that control becomes
effectively inaccessible and unremovable since snd_ctl_find_id() will not be
able to find it. This patch adds a check that makes sure that controls with a
overflowing index range can not be created.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Each control gets automatically assigned its numids when the control is created.
The allocation is done by incrementing the numid by the amount of allocated
numids per allocation. This means that excessive creation and destruction of
controls (e.g. via SNDRV_CTL_IOCTL_ELEM_ADD/REMOVE) can cause the id to
eventually overflow. Currently when this happens for the control that caused the
overflow kctl->id.numid + kctl->count will also over flow causing it to be
smaller than kctl->id.numid. Most of the code assumes that this is something
that can not happen, so we need to make sure that it won't happen
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A control that is visible on the card->controls list can be freed at any time.
This means we must not access any of its memory while not holding the
controls_rw_lock. Otherwise we risk a use after free access.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There are two issues with the current implementation for replacing user
controls. The first is that the code does not check if the control is actually a
user control and neither does it check if the control is owned by the process
that tries to remove it. That allows userspace applications to remove arbitrary
controls, which can cause a user after free if a for example a driver does not
expect a control to be removed from under its feed.
The second issue is that on one hand when a control is replaced the
user_ctl_count limit is not checked and on the other hand the user_ctl_count is
increased (even though the number of user controls does not change). This allows
userspace, once the user_ctl_count limit as been reached, to repeatedly replace
a control until user_ctl_count overflows. Once that happens new controls can be
added effectively bypassing the user_ctl_count limit.
Both issues can be fixed by instead of open-coding the removal of the control
that is to be replaced to use snd_ctl_remove_user_ctl(). This function does
proper permission checks as well as decrements user_ctl_count after the control
has been removed.
Note that by using snd_ctl_remove_user_ctl() the check which returns -EBUSY at
beginning of the function if the control already exists is removed. This is not
a problem though since the check is quite useless, because the lock that is
protecting the control list is released between the check and before adding the
new control to the list, which means that it is possible that a different
control with the same settings is added to the list after the check. Luckily
there is another check that is done while holding the lock in snd_ctl_add(), so
we'll rely on that to make sure that the same control is not added twice.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The user-control put and get handlers as well as the tlv do not protect against
concurrent access from multiple threads. Since the state of the control is not
updated atomically it is possible that either two write operations or a write
and a read operation race against each other. Both can lead to arbitrary memory
disclosure. This patch introduces a new lock that protects user-controls from
concurrent access. Since applications typically access controls sequentially
than in parallel a single lock per card should be fine.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
do_posix_clock_monotonic_gettime() is a leftover from the initial
posix timer implementation which maps to ktime_get_ts().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Sometimes PORT_EXIT messages are lost when a process is exiting.
This happens if you subscribe to the announce port with client A,
then subscribe to the announce port with client B, then kill client A.
Client B will not see the PORT_EXIT message because client A's port is
closing and is earlier in the announce port subscription list. The
for each loop will try to send the announcement to client A and fail,
then will stop trying to broadcast to other ports. Killing B works fine
since the announcement will already have gone to A. The CLIENT_EXIT
message does not get lost.
How to reproduce problem:
*** termA
$ aseqdump -p 0:1
0:1 Port subscribed 0:1 -> 128:0
*** termB
$ aseqdump -p 0:1
*** termA
0:1 Client start client 129
0:1 Port start 129:0
0:1 Port subscribed 0:1 -> 129:0
*** termB
0:1 Port subscribed 0:1 -> 129:0
*** termA
^C
*** termB
0:1 Client exit client 128
<--- expected Port exit as well (before client exit)
Signed-off-by: Adam Goode <agoode@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_seq_event_dup returns -ENOMEM in some buffer-full conditions,
but usually returns -EAGAIN. Make -EAGAIN trigger the overflow
condition in snd_seq_fifo_event_in so that the fifo is cleared
and -ENOSPC is returned to userspace as stated in the alsa-lib docs.
Signed-off-by: Adam Goode <agoode@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just to catch up a few small fixes for HD-audio and DMA engine.
|
|
Currently snd_dmaengine_pcm_trigger() calls dmaengine_pause()
unconditinally during device suspend. In case where DMA controller
doesn't support PAUSE/RESUME functionality, this call is not able
to stop the DMA controller. In this scenario, audio playback doesn't
resume after device resume.
Calling dmaengine_pause/dmaengine_terminate_all conditionally fixes
the issue.
It has been tested with audio playback on Samsung platform having
PL330 DMA controller which doesn't support PAUSE/RESUME.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix format string mismatch in snd_seq_midisynth_register_port().
Argument type of p is unsigned int.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
BugLink: http://bugs.launchpad.net/bugs/1305480
The kerneloops-daemon scans dmesg for common crash signatures, among
which is 'BUG:'. The message emitted by the PCM library is really a
warning, so the most expedient thing to do seems to be to change the
string.
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
The snd_compr_open function would always return 0 even if the compressed
ops open function failed, obviously this is incorrect. Looks like this
was introduced by a small typo in:
commit a0830dbd4e42b38aefdf3fb61ba5019a1a99ea85
ALSA: Add a reference counter to card instance
This patch returns the value from the compressed op as it should.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v3.15
Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:
- Lots of cleanups from Takashi for enumerations; the original API for
these was error prone so he's refactored lots of code to use more
modern APIs which avoid issues.
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle.
- Provide both manually and transparently locked DAPM APIs rather than
a mix of the two fixing some concurrency issues.
- Start converting CODEC drivers to use separate bus interface drivers
rather than having them all in one file helping avoid dependency
issues.
- DPCM support for Intel Haswell and Bay Trail platforms.
- Lots of work on improvements for simple-card, DaVinci and the Renesas
rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
CSR SiRF SoC.
|
|
Just a cleanup to follow the standard coding style.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A few code cleanups and optimizations. In addition, drop
snd_device_disconnect() that isn't used at all, and drop the return
values from snd_device_free*().
Another slight difference by this change is that now the device state
will become always SNDRV_DEV_REGISTERED no matter whether dev_register
ops is present or not. It's for better consistency. There should be
no impact for the current tree, as the state isn't checked.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Basically, the device type specifies the priority of the device to be
registered / freed, too. However, the priority value isn't well
utilized but only it's checked as a group. This results in
inconsistent register and free order (where each of them should be in
reversed direction).
This patch simplifies the device list management code by simply
inserting a list entry at creation time in an incremental order for
the priority value. Since we can just follow the link for register,
disconnect and free calls, we don't have to specify the group; so the
whole enum definitions are also simplified as well.
The visible change to outside is that the priorities of some object
types are revisited. For example, now the SNDRV_DEV_LOWLEVEL object
is registered before others (control, PCM, etc) and, in return,
released after others. Similarly, SNDRV_DEV_CODEC is in a lower
priority than SNDRV_DEV_BUS for ensuring the dependency.
Also, the unused SNDRV_DEV_TOPLEVEL, SNDRV_DEV_LOWLEVEL_PRE and
SNDRV_DEV_LOWLEVEL_NORMAL are removed as a cleanup.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just like PCM, allow hwdep to be assigned to a different parent device
than the card. It'll be used for the HD-audio codec device in the
later patches.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For referring to a different object from sysfs ops, take hwdep
private_data as stored via dev_set_drvdata() at creating the device
object. In that way, the same sysfs ops can be used by different
device types.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Instead of calling each time device_create_file(), create the groups
of sysfs attribute files at once in a normal way. Add a new helper
function, snd_get_device(), to return the associated device object,
so that we can handle the sysfs addition locally.
Since the sysfs file addition is done differently now,
snd_add_device_sysfs_file() helper function is removed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Allow modules to use it, fixing a build failure when the newly added
ADAU1977 driver is built as a module.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
|
|
While moving the card device into struct snd_card, the reference to
the assigned card in sysfs show/store callbacks were forgotten to be
refreshed, still accessing to the no longer used drvdata. Fix these
places to refer correctly via container_of().
Also, remove the superfluous NULL checks since it's guaranteed to be
non-NULL now.
Fixes: 8bfb181c17d2 ('ALSA: Embed card device into struct snd_card')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Using __bitwise and typedefs for the attributes of snd_device struct
isn't so useful, and rather it worsens the readability. Let's drop
them and use the straightforward enum.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use the standard pr_xxx() helpers instead of home-baked snd_print*().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use the standard pr_xxx() helpers instead of home-baked snd_print*().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use the standard pr_xxx() helpers instead of home-baked snd_print*().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use dev_err() & co as much as possible. If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use dev_err() & co as much as possible. If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use dev_err() & co as much as possible. If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use dev_err() & co as much as possible. If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use dev_err() & co as much as possible. If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.
For simplicity, introduce new helpers for pcm stream, pcm_err(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use dev_err() & co as much as possible. If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The debug prints in snd-seq-oss module are rather useless.
Let's clean up before further modifications.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Drop the own refcount but use the standard device refcounting via
get_device() and put_device(). Introduce a new completion to snd_card
instead of the wait queue for syncing the last release, which is used
in snd_card_free().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
... instead of calling device_create_file() manually.
No functional change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
As prepared in the previous patch, we are ready to create a device
struct for the card object in snd_card_create() now. This patch
changes the scheme from the old style to:
- embed a device struct for the card object into snd_card struct,
- initialize the card device in snd_card_create() (but not register),
- registration is done in snd_card_register() via device_add()
The actual card device is stored in card->card_dev. The card->dev
pointer is kept unchanged and pointing to the parent device as before
for compatibility reason.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is a part of preliminary works for modernizing the ALSA device
structure. So far, we set card->dev at later point after the object
creation. Because of this, the core layer doesn't always know which
device is being handled before it's actually registered, and it makes
impossible to show the device in error messages, for example. The
first goal is to achieve a proper struct device initialization at the
very beginning of probing.
As a first step, this patch introduces snd_card_new() function (yes
there was the same named function in the very past), in order to
receive the parent device pointer from the very beginning.
snd_card_create() is marked as deprecated.
At this point, there is no functional change other than that. The
actual change of the device creation scheme will follow later.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The last argument, name, of snd_oss_register_device() is nowhere
referred in the function in the current code. Let's drop it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Replace the lengthy #if defined(XXX) || defined(XXX_MODULE) with the
new IS_ENABLED() macro.
The patch still doesn't cover all ifdefs. For example, the dependency
on CONFIG_GAMEPORT is still open-coded because this also has an extra
dependency on MODULE. Similarly, an open-coded ifdef in pcm_oss.c and
some sequencer-related stuff are left untouched.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch fixed 2 typos in DocBook/alsa-driver-api.xml.
It is because this file is generated by make xmldocs,
I have to fix typos within source files.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There are two loops that are almost identical but only with different
checks. Refactor them with a simple helper, and give a bit more
comments what's doing there.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The test here is intended intended to prevent shift wrapping bugs when
we do "1U << idx2". We should consider the number of bits in a u32
instead of the number of bytes.
[fix another chunk similarly by tiwai]
Fixes: 7bb2491b35a2 ('ALSA: Add kconfig to specify the max card numbers')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
A bit of special care is necessary when creating the intersection of two rate
masks. This comes from the special meaning of the SNDRV_PCM_RATE_CONTINUOUS and
SNDRV_PCM_RATE_KNOT bits, which needs special handling when intersecting two
rate masks. SNDRV_PCM_RATE_CONTINUOUS means the hardware supports all rates in a
specific interval. SNDRV_PCM_RATE_KNOT means the hardware supports a set of
discrete rates specified by a list constraint. For all other cases the supported
rates are specified directly in the rate mask.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
The failures of buffer preallocations at driver initializations aren't
critical but it's still helpful to inform, so that user can know that
something doesn't work as expected.
For example, the recent page allocator change triggered regressions,
but developers didn't notice until recently because the driver didn't
complain.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Instead of keeping a separate snd-page-alloc module, merge into the
core snd-pcm module, as we don't need to keep it as an individual
module due to the drop of page reservation.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
After cutting off the proc and page reservation codes, we don't need
many headers any longer.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Nowadays we have CMA for obtaining the contiguous memory pages
efficiently. Let's kill the old kludge for reserving the memory pages
for large buffers. It was rarely useful (only for preserving pages
among module reloading or a little help by an early boot scripting),
used only by a couple of drivers, and yet it gives too much ugliness
than its benefit.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It's almost superfluous, and doesn't help much for real uses.
Let's reduce the layer size.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
