| Age | Commit message (Collapse) | Author |
|---|
|
Now that we have our own `Allocator`, `Box` and `Vec` types we can remove
Rust's `alloc` crate and the `new_uninit` unstable feature.
Also remove `Kmalloc`'s `GlobalAlloc` implementation -- we can't remove
this in a separate patch, since the `alloc` crate requires a
`#[global_allocator]` to set, that implements `GlobalAlloc`.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
LLVM 19 is dropping support for 3DNow! in commit f0eb5587ceeb ("Remove
support for 3DNow!, both intrinsics and builtins. (#96246)"):
Remove support for 3DNow!, both intrinsics and builtins. (#96246)
This set of instructions was only supported by AMD chips starting in
the K6-2 (introduced 1998), and before the "Bulldozer" family
(2011). They were never much used, as they were effectively superseded
by the more-widely-implemented SSE (first implemented on the AMD side
in Athlon XP in 2001).
This is being done as a predecessor towards general removal of MMX
register usage. Since there is almost no usage of the 3DNow!
intrinsics, and no modern hardware even implements them, simple
removal seems like the best option.
Thus we should avoid passing these to the backend, since otherwise we
get a diagnostic about it:
'-3dnow' is not a recognized feature for this target (ignoring feature)
'-3dnowa' is not a recognized feature for this target (ignoring feature)
We could try to disable them only up to LLVM 19 (not the C side one,
but the one used by `rustc`, which may be built with a range of
LLVMs). However, to avoid more complexity, we can likely just remove
them altogether. According to Nikita [2]:
> I don't think it's needed because LLVM should not generate 3dnow
instructions unless specifically asked to, using intrinsics that Rust
does not provide in the first place.
Thus do so, like Rust did for one of their builtin targets [3].
For those curious: Clang will warn only about trying to enable them
(`-m3dnow{,a}`), but not about disabling them (`-mno-3dnow{,a}`), so
there is no change needed there.
Cc: Nikita Popov <github@npopov.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: x86@kernel.org
Link: https://github.com/llvm/llvm-project/commit/f0eb5587ceeb641445b64cb264c822b4751de04a [1]
Link: https://github.com/rust-lang/rust/pull/127864#issuecomment-2235898760 [2]
Link: https://github.com/rust-lang/rust/pull/127864 [3]
Closes: https://github.com/Rust-for-Linux/linux/issues/1094
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240806144558.114461-1-ojeda@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
|
|
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Cc: stable@vger.kernel.org
Fixes: 4f7fd4d7a791 ("[PATCH] Add the -fstack-protector option to the CFLAGS")
Fixes: 60a5317ff0f4 ("x86: implement x86_32 stack protector")
Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
In the same way as for other similar files, mark as ghost the new file
generated by depmod for configured weak dependencies for modules,
modules.weakdep, so that although it is not included in the package,
claim the ownership on it.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Pull Rust updates from Miguel Ojeda:
"The highlight is the establishment of a minimum version for the Rust
toolchain, including 'rustc' (and bundled tools) and 'bindgen'.
The initial minimum will be the pinned version we currently have, i.e.
we are just widening the allowed versions. That covers three stable
Rust releases: 1.78.0, 1.79.0, 1.80.0 (getting released tomorrow),
plus beta, plus nightly.
This should already be enough for kernel developers in distributions
that provide recent Rust compiler versions routinely, such as Arch
Linux, Debian Unstable (outside the freeze period), Fedora Linux,
Gentoo Linux (especially the testing channel), Nix (unstable) and
openSUSE Slowroll and Tumbleweed.
In addition, the kernel is now being built-tested by Rust's pre-merge
CI. That is, every change that is attempting to land into the Rust
compiler is tested against the kernel, and it is merged only if it
passes. Similarly, the bindgen tool has agreed to build the kernel in
their CI too.
Thus, with the pre-merge CI in place, both projects hope to avoid
unintentional changes to Rust that break the kernel. This means that,
in general, apart from intentional changes on their side (that we will
need to workaround conditionally on our side), the upcoming Rust
compiler versions should generally work.
In addition, the Rust project has proposed getting the kernel into
stable Rust (at least solving the main blockers) as one of its three
flagship goals for 2024H2 [1].
I would like to thank Niko, Sid, Emilio et al. for their help
promoting the collaboration between Rust and the kernel.
Toolchain and infrastructure:
- Support several Rust toolchain versions.
- Support several bindgen versions.
- Remove 'cargo' requirement and simplify 'rusttest', thanks to
'alloc' having been dropped last cycle.
- Provide proper error reporting for the 'rust-analyzer' target.
'kernel' crate:
- Add 'uaccess' module with a safe userspace pointers abstraction.
- Add 'page' module with a 'struct page' abstraction.
- Support more complex generics in workqueue's 'impl_has_work!'
macro.
'macros' crate:
- Add 'firmware' field support to the 'module!' macro.
- Improve 'module!' macro documentation.
Documentation:
- Provide instructions on what packages should be installed to build
the kernel in some popular Linux distributions.
- Introduce the new kernel.org LLVM+Rust toolchains.
- Explain '#[no_std]'.
And a few other small bits"
Link: https://rust-lang.github.io/rust-project-goals/2024h2/index.html#flagship-goals [1]
* tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux: (26 commits)
docs: rust: quick-start: add section on Linux distributions
rust: warn about `bindgen` versions 0.66.0 and 0.66.1
rust: start supporting several `bindgen` versions
rust: work around `bindgen` 0.69.0 issue
rust: avoid assuming a particular `bindgen` build
rust: start supporting several compiler versions
rust: simplify Clippy warning flags set
rust: relax most deny-level lints to warnings
rust: allow `dead_code` for never constructed bindings
rust: init: simplify from `map_err` to `inspect_err`
rust: macros: indent list item in `paste!`'s docs
rust: add abstraction for `struct page`
rust: uaccess: add typed accessors for userspace pointers
uaccess: always export _copy_[from|to]_user with CONFIG_RUST
rust: uaccess: add userspace pointers
kbuild: rust-analyzer: improve comment documentation
kbuild: rust-analyzer: better error handling
docs: rust: no_std is used
rust: alloc: add __GFP_HIGHMEM flag
rust: alloc: fix typo in docs for GFP_NOWAIT
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Support for preemption
- i386 Rust support
- Huge cleanup by Benjamin Berg
- UBSAN support
- Removal of dead code
* tag 'uml-for-linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (41 commits)
um: vector: always reset vp->opened
um: vector: remove vp->lock
um: register power-off handler
um: line: always fill *error_out in setup_one_line()
um: remove pcap driver from documentation
um: Enable preemption in UML
um: refactor TLB update handling
um: simplify and consolidate TLB updates
um: remove force_flush_all from fork_handler
um: Do not flush MM in flush_thread
um: Delay flushing syscalls until the thread is restarted
um: remove copy_context_skas0
um: remove LDT support
um: compress memory related stub syscalls while adding them
um: Rework syscall handling
um: Add generic stub_syscall6 function
um: Create signal stack memory assignment in stub_data
um: Remove stub-data.h include from common-offsets.h
um: time-travel: fix signal blocking race/hang
um: time-travel: remove time_exit()
...
|
|
semicolon separation in LC_ALL is wrong. Either variable needs to be
exported before as a separate commit or set as part of the commit in the
beginning. Used second variant.
This fixes broken build on user's locale setup which makes 'date' binary
to produce invalid characters in rpm changelog (e.g. cs_CZ.UTF-8 'čec'):
$ make binrpm-pkg
GEN rpmbuild/SPECS/kernel.spec
rpmbuild -bb rpmbuild/SPECS/kernel.spec --define='_topdirlinux/rpmbuild' \
--target x86_64-linux --build-in-place --noprep --define='_smp_mflags \
%{nil}' $(rpm -q rpm >/dev/null 2>&1 || echo --nodeps)
Building target platforms: x86_64-linux
Building for target x86_64-linux
error: bad date in %changelog: St čec 24 2024 user <user@somehost>
make[2]: *** [scripts/Makefile.package:71: binrpm-pkg] Error 1
make[1]: *** [linux/Makefile:1546: binrpm-pkg] Error 2
make: *** [Makefile:224: __sub-make] Error 2
Fixes: 301c10908e42 ("kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec")
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_KALLSYMS and
CONFIG_DEBUG_INFO_BTF
- Enable the warning for symbol reference to .exit.* sections by
default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate
base DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
kbuild: doc: gcc to CC change
kallsyms: change sym_entry::percpu_absolute to bool type
kallsyms: unify seq and start_pos fields of struct sym_entry
kallsyms: add more original symbol type/name in comment lines
kallsyms: use \t instead of a tab in printf()
kallsyms: avoid repeated calculation of array size for markers
kbuild: add script and target to generate pacman package
modpost: use generic macros for hash table implementation
kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
Makefile: add comment to discourage tools/* addition for kernel builds
kbuild: clean up scripts/remove-stale-files
kconfig: recursive checks drop file/lineno
kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
kallsyms: get rid of code for absolute kallsyms
kbuild: Create INSTALL_PATH directory if it does not exist
kbuild: Abort make on install failures
kconfig: remove 'e1' and 'e2' macros from expression deduplication
kconfig: remove SYMBOL_CHOICEVAL flag
kconfig: add const qualifiers to several function arguments
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- In the series "treewide: Refactor heap related implementation",
Kuan-Wei Chiu has significantly reworked the min_heap library code
and has taught bcachefs to use the new more generic implementation.
- Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
reworks the cpumask and nodemask headers to make things generally
more rational.
- Kuan-Wei Chiu has sent along some maintenance work against our
sorting library code in the series "lib/sort: Optimizations and
cleanups".
- More library maintainance work from Christophe Jaillet in the series
"Remove usage of the deprecated ida_simple_xx() API".
- Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
series "nilfs2: eliminate the call to inode_attach_wb()".
- Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix
GDB command error".
- Plus the usual shower of singleton patches all over the place. Please
see the relevant changelogs for details.
* tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (98 commits)
ia64: scrub ia64 from poison.h
watchdog/perf: properly initialize the turbo mode timestamp and rearm counter
tsacct: replace strncpy() with strscpy()
lib/bch.c: use swap() to improve code
test_bpf: convert comma to semicolon
init/modpost: conditionally check section mismatch to __meminit*
init: remove unused __MEMINIT* macros
nilfs2: Constify struct kobj_type
nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro
math: rational: add missing MODULE_DESCRIPTION() macro
lib/zlib: add missing MODULE_DESCRIPTION() macro
fs: ufs: add MODULE_DESCRIPTION()
lib/rbtree.c: fix the example typo
ocfs2: add bounds checking to ocfs2_check_dir_entry()
fs: add kernel-doc comments to ocfs2_prepare_orphan_dir()
coredump: simplify zap_process()
selftests/fpu: add missing MODULE_DESCRIPTION() macro
compiler.h: simplify data_race() macro
build-id: require program headers to be right after ELF header
resource: add missing MODULE_DESCRIPTION()
...
|
|
This field is boolean.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The struct sym_entry uses the 'seq' and 'start_pos' fields to remember
the index in the symbol table. They serve the same purpose and are not
used simultaneously. Unify them.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit bea5b7450474 ("kallsyms: expand symbol name into comment for
debugging") added the uncompressed type/name in the comment lines of
kallsyms_offsets.
It would be useful to do the same for kallsyms_names and
kallsyms_seqs_of_names.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This string literal uses a mixture of \t escape sequences and a tab.
Use \t consistently.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Introduce the markers_cnt variable for readability.
No functional change intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
pacman is the package manager used by Arch Linux and its derivates.
Creating native packages from the kernel tree has multiple advantages:
* The package triggers the correct hooks for initramfs generation and
bootloader configuration
* Uninstallation is complete and also invokes the relevant hooks
* New UAPI headers can be installed without any manual bookkeeping
The PKGBUILD file is a modified version of the one used for the
downstream Arch Linux "linux" package.
Extra steps that should not be necessary for a development kernel have
been removed and an UAPI header package has been added.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Use macros provided by hashtable.h
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Move array_size.h, hashtable.h, list.h, list_types.h from scripts/kconfig/
to scripts/include/.
These headers will be useful for other host programs.
Remove scripts/mod/list.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
These lines have been here for more than a year. Remove them.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This prevents segfault when getting filename and lineno in recursive
checks.
If the following snippet is found in Kconfig:
[Test code 1]
config FOO
bool
depends on BAR
select BAR
... without BAR defined; then there is a segfault.
Kconfig:34:error: recursive dependency detected!
Kconfig:34: symbol FOO depends on BAR
make[4]: *** [scripts/kconfig/Makefile:85: allnoconfig] Segmentation fault
This is because of the following. BAR is a fake entry created by
sym_lookup() with prop being NULL. In the recursive check, there is a
NULL check for prop to fall back to stack->sym->prop if stack->prop is
NULL. However, in this case, stack->sym points to the fake BAR entry
created by sym_lookup(), so prop is still NULL. prop was then referenced
without additional NULL checks, causing segfault.
As the previous email thread suggests, the file and lineno for select is
also wrong:
[Test code 2]
config FOO
bool
config BAR
bool
config FOO
bool "FOO"
depends on BAR
select BAR
$ make defconfig
*** Default configuration is based on 'x86_64_defconfig'
Kconfig:1:error: recursive dependency detected!
Kconfig:1: symbol FOO depends on BAR
Kconfig:4: symbol BAR is selected by FOO
[...]
Kconfig:4 should be Kconfig:10.
This patch deletes the wrong and segfault-prone filename/lineno
inference completely. With this patch, Test code 1 yields:
error: recursive dependency detected!
symbol FOO depends on BAR
symbol BAR is selected by FOO
Signed-off-by: HONG Yifan <elsk@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Fix the following rpmbuild warning:
$ make srcrpm-pkg
...
RPM build warnings:
source_date_epoch_from_changelog set but %changelog is missing
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture")
removed the last use of the absolute kallsyms.
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/20240221202655.2423854-1-jannh@google.com/
[masahiroy@kernel.org: rebase the code and reword the commit description]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
If INSTALL_PATH is not a valid directory, create it, like what
modules_install and dtbs_install will do in the same situation.
Signed-off-by: Zhang Bingwu <xtexchooser@duck.com>
Reviewed-by: Nicolas Schier <nicolas@jasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
I do not think the macros 'e1' and 'e2' are readable.
The statement:
e1 = expr_alloc_symbol(...);
affects the caller's variable, but this is not sufficiently clear from the code.
Remove the macros. No functional change intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Remove support for 40x CPUs & platforms
- Add support to the 64-bit BPF JIT for cpu v4 instructions
- Fix PCI hotplug driver crash on powernv
- Fix doorbell emulation for KVM on PAPR guests (nestedv2)
- Fix KVM nested guest handling of some less used SPRs
- Online NUMA nodes with no CPU/memory if they have a PCI device
attached
- Reduce memory overhead of enabling kfence on 64-bit Radix MMU kernels
- Reimplement the iommu table_group_ops for pseries for VFIO SPAPR TCE
Thanks to: Anjali K, Artem Savkov, Athira Rajeev, Breno Leitao, Brian
King, Celeste Liu, Christophe Leroy, Esben Haabendal, Gaurav Batra,
Gautam Menghani, Haren Myneni, Hari Bathini, Jeff Johnson, Krishna
Kumar, Krzysztof Kozlowski, Nathan Lynch, Nicholas Piggin, Nick Bowler,
Nilay Shroff, Rob Herring (Arm), Shawn Anastasio, Shivaprasad G Bhat,
Sourabh Jain, Srikar Dronamraju, Timothy Pearson, Uwe Kleine-König, and
Vaibhav Jain.
* tag 'powerpc-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (57 commits)
Documentation/powerpc: Mention 40x is removed
powerpc: Remove 40x leftovers
macintosh/therm_windtunnel: fix module unload.
powerpc: Check only single values are passed to CPU/MMU feature checks
powerpc/xmon: Fix disassembly CPU feature checks
powerpc: Drop clang workaround for builtin constant checks
powerpc64/bpf: jit support for signed division and modulo
powerpc64/bpf: jit support for sign extended mov
powerpc64/bpf: jit support for sign extended load
powerpc64/bpf: jit support for unconditional byte swap
powerpc64/bpf: jit support for 32bit offset jmp instruction
powerpc/pci: Hotplug driver bridge support
pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv
powerpc/configs: Update defconfig with now user-visible CONFIG_FSL_IFC
powerpc: add missing MODULE_DESCRIPTION() macros
macintosh/mac_hid: add MODULE_DESCRIPTION()
KVM: PPC: add missing MODULE_DESCRIPTION() macros
powerpc/kexec: Use of_property_read_reg()
powerpc/64s/radix/kfence: map __kfence_pool at page granularity
powerpc/pseries/iommu: Define spapr_tce_table_group_ops only with CONFIG_IOMMU_API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull uprobe fix from Masami Hiramatsu:
- Add sys_uretprobe entry to scripts/syscall.tbl.
* tag 'probes-fixes-v6.11-pre-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
syscalls: Fix to add sys_uretprobe to syscall.tbl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes in this cycle, but mostly for cleanups and
refactoring.
Significant amount of changes are about DT schema conversions for ASoC
at this time while we see other usual suspects, too.
Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments
PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers"
* tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits)
kselftest/alsa: Log the PCM ID in pcm-test
kselftest/alsa: Use card name rather than number in test names
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
ALSA: seq: ump: Skip useless ports for static blocks
ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
ALSA: usb: Use BIT() for bit values
ALSA: usb: Fix UBSAN warning in parse_audio_unit()
ALSA: hda/realtek: Enable headset mic on Positivo SU C1400
ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume
ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply
ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings
ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable
ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
ASoC: cs530x: Remove bclk from private structure
ASoC: cs530x: Calculate proper bclk rate using TDM
ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
firmware: cs_dsp: Rename fw_ver to wmfw_ver
firmware: cs_dsp: Clarify wmfw format version log message
firmware: cs_dsp: Make wmfw and bin filename arguments const char *
...
|
|
Add sys_uretprobe entry to scripts/syscall.tbl as same as
arch/x86/entry/syscalls/syscall_64.tbl.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240719102824.1e086a40@canb.auug.org.au/
Fixes: 63ded110979b ("uprobe: Change uretprobe syscall scope and number")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Pull documentation updates from Jonathan Corbet:
"Nothing hugely exciting happening in the documentation tree this time
around, mostly more of the usual:
- More Spanish, Italian, and Chinese translations
- A new script, scripts/checktransupdate.py, can be used to see which
commits have touched an (English) document since a given
translation was last updated.
- A couple of "best practices" suggestions (on Link: tags and
off-list discussions) that were not entirely at consensus level,
but I concluded they were close enough to accept.
- Some nice cleanups removing documentation for kernel parameters
that have not been recognized for ... a long time.
...along with the usual updates, typo fixes, and such"
* tag 'docs-6.11' of git://git.lwn.net/linux: (57 commits)
Documentation: Document user_events ioctl code
docs/pinctrl: fix typo in mapping example
docs: maintainer: discourage taking conversations off-list
docs: driver-model: platform: update the definition of platform_driver
docs/sp_SP: Add translation for scheduler/sched-design-CFS.rst
writing_musb_glue_layer.rst: Fix broken URL
zh_CN/admin-guide: one typo fix
docs/zh_CN/virt: Update the translation of guest-halt-polling.rst
Documentation: add reference from dynamic debug to loglevel kernel params
Documentation: best practices for using Link trailers
Documentation: fix links to mailing list services
Documentation: exception-tables.rst: Fix the wrong steps referenced
docs/zh_CN: add process/researcher-guidelines Chinese translation
Documentation/tools/rv: fix document header
docs/sp_SP: Add translation of process/maintainer-kvm-x86.rst
docs/admin-guide/mm: correct typo 'quired' to 'queried'
Add libps2 to the input section of driver-api
Docs/mm/index: move allocation profiling document to unsorted documents chapter
Docs/mm/index: rename 'Legacy Documentation' to 'Unsorted Documentation'
Docs/mm/index: Remove 'Memory Management Guide' chapter marker
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"The most prominent change this time is the kmem_buckets based
hardening of kmalloc() allocations from Kees Cook.
We have also extended the kmalloc() alignment guarantees for
non-power-of-two sizes in a way that benefits rust.
The rest are various cleanups and non-critical fixups.
- Dedicated bucket allocator (Kees Cook)
This series [1] enhances the probabilistic defense against heap
spraying/grooming of CONFIG_RANDOM_KMALLOC_CACHES from last year.
kmalloc() users that are known to be useful for exploits can get
completely separate set of kmalloc caches that can't be shared with
other users. The first converted users are alloc_msg() and
memdup_user().
The hardening is enabled by CONFIG_SLAB_BUCKETS.
- Extended kmalloc() alignment guarantees (Vlastimil Babka)
For years now we have guaranteed natural alignment for power-of-two
allocations, but nothing was defined for other sizes (in practice,
we have two such buckets, kmalloc-96 and kmalloc-192).
To avoid unnecessary padding in the rust layer due to its alignment
rules, extend the guarantee so that the alignment is at least the
largest power-of-two divisor of the requested size.
This fits what rust needs, is a superset of the existing
power-of-two guarantee, and does not in practice change the layout
(and thus does not add overhead due to padding) of the kmalloc-96
and kmalloc-192 caches, unless slab debugging is enabled for them.
- Cleanups and non-critical fixups (Chengming Zhou, Suren
Baghdasaryan, Matthew Willcox, Alex Shi, and Vlastimil Babka)
Various tweaks related to the new alloc profiling code, folio
conversion, debugging and more leftovers after SLAB"
Link: https://lore.kernel.org/all/20240701190152.it.631-kees@kernel.org/ [1]
* tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/memcg: alignment memcg_data define condition
mm, slab: move prepare_slab_obj_exts_hook under CONFIG_MEM_ALLOC_PROFILING
mm, slab: move allocation tagging code in the alloc path into a hook
mm/util: Use dedicated slab buckets for memdup_user()
ipc, msg: Use dedicated slab buckets for alloc_msg()
mm/slab: Introduce kmem_buckets_create() and family
mm/slab: Introduce kvmalloc_buckets_node() that can take kmem_buckets argument
mm/slab: Plumb kmem_buckets into __do_kmalloc_node()
mm/slab: Introduce kmem_buckets typedef
slab, rust: extend kmalloc() alignment guarantees to remove Rust padding
slab: delete useless RED_INACTIVE and RED_ACTIVE
slab: don't put freepointer outside of object if only orig_size
slab: make check_object() more consistent
mm: Reduce the number of slab->folio casts
mm, slab: don't wrap internal functions with alloc_hooks()
|
|
Commit fbb5c0606fa4 ("kbuild: add syscall table generation to
scripts/Makefile.asm-headers") started to generate syscall headers
for architectures using generic syscalls.
However, these headers are always rebuilt using GNU Make 4.4.1 or newer.
When using GNU Make 4.4 or older, these headers are not rebuilt when the
command to generate them is changed, despite the use of the if_changed
macro.
scripts/Makefile.asm-headers now uses FORCE, but it is not marked as
.PHONY. To handle the command line change correctly, .*.cmd files must
be included.
Fixes: fbb5c0606fa4 ("kbuild: add syscall table generation to scripts/Makefile.asm-headers")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/CAHk-=wibB7SvXnUftBgAt+4-3vEKRpvEgBeDEH=i=j2GvDitoA@mail.gmail.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface,
new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75
GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and
CSI-2 blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'"
* tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: timer: sprd-timer: convert to YAML
dt-bindings: incomplete-devices: document devices without bindings
dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43
dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node
dt-bindings: soc: fsl: cpm_qe: convert to yaml format
dt-bindings: i2c: i2c-fsi: Convert to json-schema
dt-bindings: fsi: Document the FSI Hub Controller
dt-bindings: fsi: Document the AST2700 FSI controller
dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
dt-bindings: fsi: Document the FSI controller common properties
dt-bindings: fsi: Document the IBM SBEFIFO engine
dt-bindings: fsi: p9-occ: Convert to json-schema
dt-bindings: fsi: Document the IBM SCOM engine
dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml
dt-bindings: soc: fsl: Convert q(b)man-* to yaml format
dt-bindings: misc: fsl,qoriq-mc: convert to yaml format
dt-bindings: drop stale Anson Huang from maintainers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Fix bug that caused objtool to confuse certain memory ops added by
KASAN instrumentation as stack accesses
- Various faddr2line optimizations
- Improve error messages
* tag 'objtool-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool/x86: objtool can confuse memory and stack access
objtool: Use "action" in error message to be consistent with help
scripts/faddr2line: Check only two symbols when calculating symbol size
scripts/faddr2line: Remove call to addr2line from find_dir_prefix()
scripts/faddr2line: Invoke addr2line as a single long-running process
scripts/faddr2line: Pass --addresses argument to addr2line
scripts/faddr2line: Check vmlinux only once
scripts/faddr2line: Combine three readelf calls into one
scripts/faddr2line: Reduce number of readelf calls to three
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- lkdtm/bugs: add test for hung smp_call_function_single() (Mark
Rutland)
- gcc-plugins: Remove duplicate included header file stringpool.h
(Thorsten Blum)
- ARM: Remove address checking for MMUless devices (Yanjun Yang)
- randomize_kstack: Clean up per-arch entropy and codegen
- KCFI: Make FineIBT mode Kconfig selectable
- fortify: Do not special-case 0-sized destinations
* tag 'hardening-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randomize_kstack: Improve stack alignment codegen
ARM: Remove address checking for MMUless devices
gcc-plugins: Remove duplicate included header file stringpool.h
randomize_kstack: Remove non-functional per-arch entropy filtering
fortify: Do not special-case 0-sized destinations
x86/alternatives: Make FineIBT mode Kconfig selectable
lkdtm/bugs: add test for hung smp_call_function_single()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Most of this is part of my ongoing work to clean up the system call
tables. In this bit, all of the newer architectures are converted to
use the machine readable syscall.tbl format instead in place of
complex macros in include/uapi/asm-generic/unistd.h.
This follows an earlier series that fixed various API mismatches and
in turn is used as the base for planned simplifications.
The other two patches are dead code removal and a warning fix"
* tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
vmlinux.lds.h: catch .bss..L* sections into BSS")
fixmap: Remove unused set_fixmap_offset_io()
riscv: convert to generic syscall table
openrisc: convert to generic syscall table
nios2: convert to generic syscall table
loongarch: convert to generic syscall table
hexagon: use new system call table
csky: convert to generic syscall table
arm64: rework compat syscall macros
arm64: generate 64-bit syscall.tbl
arm64: convert unistd_32.h to syscall.tbl format
arc: convert to generic syscall table
clone3: drop __ARCH_WANT_SYS_CLONE3 macro
kbuild: add syscall table generation to scripts/Makefile.asm-headers
kbuild: verify asm-generic header list
loongarch: avoid generating extra header files
um: don't generate asm/bpf_perf_event.h
csky: drop asm/gpio.h wrapper
syscalls: add generic scripts/syscall.tbl
|
|
This flag is unneeded because a choice member can be detected by
other means.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Clarify that the given structures are not modified.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Kconfig simplifies expressions, but redundant '&&' and '||' operators
involving constant symbols 'y' and 'n' are sometimes trimmed and
sometimes not.
[Test Code]
config DEP
def_bool y
config A
bool "A"
depends on DEP && y
config B
bool "B"
depends on DEP && y && y
[Result]
$ make helpnewconfig
[ snip ]
-----
There is no help available for this option.
Symbol: A [=n]
Type : bool
Defined at Kconfig:4
Prompt: A
Depends on: DEP [=y] && y [=y]
Location:
-> A (A [=n])
-----
-----
There is no help available for this option.
Symbol: B [=n]
Type : bool
Defined at Kconfig:8
Prompt: B
Depends on: DEP [=y]
Location:
-> B (B [=n])
-----
The dependency for A, 'DEP && y', remains as-is, while that for B,
'DEP && y && y', has been reduced to 'DEP'.
Currently, expr_eliminate_dups() calls expr_eliminate_yn() only when
trans_count != 0, in other words, only when expr_eliminate_dups1() has
trimmed at least one leaf. It fails to trim a single '&& y', etc.
To fix this inconsistent behavior, expr_eliminate_yn() should be called
at least once even if no leaf has been trimmed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
${DEBFULLNAME-${user}} falls back to ${user} when DEBFULLNAME is unset.
It is more reasonable to do so when DEBFULLNAME is unset or null.
Otherwise, the command:
$ DEBFULLNAME= make deb-pkg
will leave the name field blank.
The same applies to KBUILD_BUILD_USER and KBUILD_BUILD_HOST.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
/usr/include/elf.h, which originates from the glibc/musl, defines
R_ARM_THM_PC22 instead of R_ARM_THM_CALL.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
Commit f5983dab0ead ("modpost: define more R_ARM_* for old
distributions") added self-definitions for the R_ARM_* macros to fix
build errors on CentOS 7.
RHEL/CentOS 7 were retired at the end of June.
Remove all the R_ARM_* definitions (except for R_ARM_THM_CALL), which
should be available in recent distributions.
glibc and musl added most of R_ARM_* macros in 2013. [1] [2]
[1]: https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=08cbd996d33114ca50644d060fbe3a08260430fb
[2]: https://git.musl-libc.org/cgit/musl/commit/?id=268375c1c017c0bdefeed1a330811e433c4dfaef
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
RHEL/CentOS 7, popular distributions that install GNU Make 3.82, reached
EOM/EOL on June 30, 2024. While you may get extended support, it is a
good time to raise the minimum GNU Make version.
The new requirement, GNU Make 4.0, was released in October, 2013.
I did not touch the Makefiles under tools/ because I do not know the
requirements for building tools. I do not find any GNU Make version
checks under tools/.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
As commit afa974b77128 ("kbuild: add real-prereqs shorthand for
$(filter-out FORCE,$^)") explained, $(real-prereqs) is not just a list
of objects when linking a multi-object module. If a single-object module
is turned into a multi-object module, $^ (and therefore $(real-prereqs)
as well) contains header files recorded in the *.cmd file. Such headers
must be filtered out.
Now that a DTB can be built either from a single source or multiple
source files, the same issue can occur.
Consider the following scenario:
First, foo.dtb is implemented as a single-blob device tree.
The code looks something like this:
[Sample Code 1]
Makefile:
dtb-y += foo.dtb
foo.dts:
#include <dt-bindings/gpio/gpio.h>
/dts-v1/;
/ { };
When it is compiled, .foo.dtb.cmd records that foo.dtb depends on
scripts/dtc/include-prefixes/dt-bindings/gpio/gpio.h.
Later, foo.dtb is split into a base and an overlay. The code looks
something like this:
[Sample Code 2]
Makefile:
dtb-y += foo.dtb
foo-dtbs := foo-base.dtb foo-addon.dtbo
foo-base.dts:
#include <dt-bindings/gpio/gpio.h>
/dts-v1/;
/ { };
foo-addon.dtso:
/dts-v1/;
/plugin/;
/ { };
If you rebuild foo.dtb without 'make clean', you will get this error:
Overlay 'scripts/dtc/include-prefixes/dt-bindings/gpio/gpio.h' is incomplete
$(real-prereqs) contains not only foo-base.dtb and foo-addon.dtbo but
also scripts/dtc/include-prefixes/dt-bindings/gpio/gpio.h, which is
passed to scripts/dtc/fdtoverlay.
Fixes: 15d16d6dadf6 ("kbuild: Add generic rule to apply fdtoverlay")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Set -e to make these scripts fail on the first error.
Set -u because these scripts are invoked by Makefile, and do not work
properly without necessary variables defined.
I tweaked mkdebian to cope with optional environment variables.
Remove the explicit "test -n ..." from install-extmod-build.
Both options are described in POSIX. [1]
[1]: https://pubs.opengroup.org/onlinepubs/009604499/utilities/set.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu mitigation updates from Borislav Petkov:
- Add a spectre_bhi=vmexit mitigation option aimed at cloud
environments
- Remove duplicated Spectre cmdline option documentation
- Add separate macro definitions for syscall handlers which do not
return in order to address objtool warnings
* tag 'x86_bugs_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add 'spectre_bhi=vmexit' cmdline option
x86/bugs: Remove duplicate Spectre cmdline option descriptions
x86/syscall: Mark exit[_group] syscall handlers __noreturn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build update from Borislav Petkov:
- Make sure insn support detection uses the proper compiler flag in
bi-arch builds
* tag 'x86_build_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kconfig: Add as-instr64 macro to properly evaluate AS_WRUSS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"There's one new feature here, a regmap_multi_reg_read() matching the
existing write function which has some IIO users coming.
This allows atomic reads from multiple registers without the need to
wrap a higher level lock in the client driver just for regmap (which
already has locks anyway).
We also have one fix for the KUnit tests, and a bunch of cleanups"
* tag 'regmap-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Add test cases for regmap_multi_reg_(read,write}()
regmap: Implement regmap_multi_reg_read()
regmap-irq: handle const struct regmap_irq_sub_irq_map
const_structs.checkpatch: add regmap structs
regmap: add missing MODULE_DESCRIPTION() macros
regmap-i2c: add missing MODULE_DESCRIPTION() macro
regmap: kunit: Use array_size() and sizeof(*ptr) consistently
regmap: maple: Switch to use kmemdup_array()
regmap: cache: Switch to use kmemdup_array()
regmap: cache: Use correct type of the rb_for_each() parameter
regmap: Switch to use kmemdup_array()
regmap: kunit: add missing MODULE_DESCRIPTION()
regmap: kunit: Fix memory leaks in gen_regmap() and gen_raw_regmap()
|
|
Commit d5940c60e057 ("kbuild: deb-pkg improve maintainer address
generation") supported the "name <email>" form for DEBEMAIL, with
behavior slightly different from devscripts.
In Kbuild, if DEBEMAIL is given in the form "name <email>", it is used
as-is, and DEBFULLNAME is ignored.
In contrast, debchange takes the name from DEBFULLNAME (or NAME) if set,
as described in 'man debchange':
If this variable has the form "name <email>", then the maintainer name
will also be taken from here if neither DEBFULLNAME nor NAME is set.
This commit removes support for the "name <email> form for DEBEMAIL,
as the current behavior is already different from debchange, and the
Debian manual suggests setting the email address and name separately in
DEBEMAIL and DEBFULLNAME. [1]
If there are any complaints about this removal, we can re-add it,
with better alignment with the debchange implementation. [2]
[1]: https://www.debian.org/doc/manuals/debmake-doc/ch03.en.html#email-setup
[2]: https://salsa.debian.org/debian/devscripts/-/blob/v2.23.7/scripts/debchange.pl#L802
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Commit edec611db047 ("kbuild, deb-pkg: improve maintainer
identification") added the EMAIL and NAME environment variables.
Commit d5940c60e057 ("kbuild: deb-pkg improve maintainer address
generation") removed support for NAME, but kept support for EMAIL.
The EMAIL and NAME environment variables are supported by some tools
(see 'man debchange'), but not by all.
We should support both of them, or neither of them. We should not stop
halfway.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
