| Age | Commit message (Collapse) | Author |
|---|
|
The functionality of these utilities have been incorporated into the
xdp-bench utility in xdp-tools.
Equivalent functionality is:
xdp1 eth0
--> xdp-bench drop -p parse-ip -l load-bytes eth0
xdp2 eth0
--> xdp-bench drop -p swap-macs eth0
Note that there's a slight difference in behaviour of those examples: the
swap-macs operation of xdp-bench doesn't use the bpf_xdp_load_bytes()
helper to load the packet data, whereas the xdp2 utility did so
unconditionally. For the parse-ip action the use of bpf_xdp_load_bytes()
can be selected by the '-l load-bytes' switch, with the difference that the
xdp-bench utility will perform two separate calls to the helper, one to
load the ethernet header and another to load the IP header; where the xdp1
utility only performed one call always loading 60 bytes of data.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230824102255.1561885-5-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use the new type-safe wrappers around bpf_obj_get_info_by_fd().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230214231221.249277-5-iii@linux.ibm.com
|
|
BPF map iteration in xdp1_user results in endless loop without any
output, because the return value of bpf_map_get_next_key() is checked
against the wrong value.
Other call locations of bpf_map_get_next_key() check for equal 0 for
continuing the iteration. xdp1_user checks against unequal -1. This is
wrong for a function which can return arbitrary negative errno values,
because a return value of e.g. -2 results in an endless loop.
With this fix xdp1_user is printing statistics again:
proto 0: 1 pkt/s
proto 0: 1 pkt/s
proto 17: 107383 pkt/s
proto 17: 881655 pkt/s
proto 17: 882083 pkt/s
proto 17: 881758 pkt/s
Fixes: bd054102a8c7 ("libbpf: enforce strict libbpf 1.0 behaviors")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221013200922.17167-1-gerhard@engleder-embedded.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
If interval is 2, and sum - prev[key] = 1, the result = 0. This will
mislead the tester that the port has no traffic right now. So reduce the
sampling interval to 1.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220419114746.291613-1-shaozhengchao@huawei.com
|
|
We have switched to memcg-based memory accouting and thus the rlimit is
not needed any more. LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK was introduced in
libbpf for backward compatibility, so we can use it instead now.
This patch also removes the useless header sys/resource.h from many files
in samples/bpf.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220409125958.92629-2-laoar.shao@gmail.com
|
|
Remove all the remaining uses of deprecated bpf_prog_load_xattr() API.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220202225916.3313522-7-andrii@kernel.org
|
|
Use new bpf_xdp_*() APIs across all XDP-related BPF samples.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220120061422.2710637-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Replace deprecated bpf_{map,program}__next APIs with newly added
bpf_object__next_{map,program} APIs, so that no compilation warnings
emit.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211003165844.4054931-3-hengqi.chen@gmail.com
|
|
Since bpf is not using rlimit memlock for the memory accounting
and control, do not change the limit in sample applications.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-35-guro@fb.com
|
|
Fix all files in samples/bpf to include libbpf header files with the bpf/
prefix, to be consistent with external users of the library. Also ensure
that all includes of exported libbpf header files (those that are exported
on 'make install' of the library) use bracketed includes instead of quoted.
To make sure no new files are introduced that doesn't include the bpf/
prefix in its include, remove tools/lib/bpf from the include path entirely,
and use tools/lib instead.
Fixes: 6910d7d3867a ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560911.1683545.8795966751309534150.stgit@toke.dk
|
|
When attaching XDP programs, userspace can set flags to request the attach
mode (generic/SKB mode, driver mode or hw offloaded mode). If no such flags
are requested, the kernel will attempt to attach in driver mode, and then
silently fall back to SKB mode if this fails.
The silent fallback is a major source of user confusion, as users will try
to load a program on a device without XDP support, and instead of an error
they will get the silent fallback behaviour, not notice, and then wonder
why performance is not what they were expecting.
In an attempt to combat this, let's switch all the samples to default to
explicitly requesting driver-mode attach. As part of this, ensure that all
the userspace utilities have a switch to enable SKB mode. For those that
have a switch to request driver mode, keep it but turn it into a no-op.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Link: https://lore.kernel.org/bpf/20191216110742.364456-1-toke@redhat.com
|
|
Currently, under samples, several methods are being used to load bpf
program.
Since using libbpf is preferred solution, lots of previously used
'load_bpf_file' from bpf_load are replaced with 'bpf_prog_load_xattr'
from libbpf.
But some of the error messages still show up as 'load_bpf_file' instead
of 'bpf_prog_load_xattr'.
This commit fixes outdated errror messages under samples and fixes some
code style issues.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191107005153.31541-2-danieltimlee@gmail.com
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-06-19
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) new SO_REUSEPORT_DETACH_BPF setsocktopt, from Martin.
2) BTF based map definition, from Andrii.
3) support bpf_map_lookup_elem for xskmap, from Jonathan.
4) bounded loops and scalar precision logic in the verifier, from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, header inclusion in each file is inconsistent.
For example, "libbpf.h" header is included as multiple ways.
#include "bpf/libbpf.h"
#include "libbpf.h"
Due to commit b552d33c80a9 ("samples/bpf: fix include path
in Makefile"), $(srctree)/tools/lib/bpf/ path had been included
during build, path "bpf/" in header isn't necessary anymore.
This commit removes path "bpf/" in header inclusion.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of version 2 of the gnu general public license as
published by the free software foundation
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 107 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171438.615055994@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check the program id within the signal handler on polling xdp samples
that were previously converted to libbpf usage. Avoid the situation of
unloading the program that was not attached by sample that is exiting.
Handle also the case where bpf_get_link_xdp_id didn't exit with an error
but the xdp program was not found on an interface.
Reported-by: Michal Papaj <michal.papaj@intel.com>
Reported-by: Jakub Spizewski <jakub.spizewski@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Make xdp samples consistent with iproute2 behavior and set the
XDP_FLAGS_UPDATE_IF_NOEXIST by default when setting the xdp program on
interface. Provide an option for user to force the program loading,
which as a result will not include the mentioned flag in
bpf_set_link_xdp_fd call.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Use optind as index for argv instead of a hardcoded value.
When the program has options this leads to improper parameter handling.
Fixes: dc378a1ab5b6 ("samples: bpf: get ifindex from ifname")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Find the ifindex with if_nametoindex() instead of requiring the
numeric ifindex.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Store only the total packet count for every protocol, instead of the
whole per-cpu array.
Use bpf_map_get_next_key() to iterate the map, instead of looking up
all the protocols.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that we can use full powers of libbpf in BPF samples, we
should perhaps make the simplest XDP programs not depend on
bpf_load helpers. This way newcomers will be exposed to the
recommended library from the start.
Use of bpf_prog_load_xattr() will also make it trivial to later
on request offload of the programs by simply adding ifindex to
the xattr.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Use bpf_set_link_xdp_fd instead of set_link_xdp_fd to remove some
code duplication and benefit of netlink ext ack errors message.
Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Default rlimit RLIMIT_MEMLOCK is 64KB, causes bpf map failure.
e.g.
[root@lab bpf]#./xdp1 -N $(</sys/class/net/eth2/ifindex)
failed to create a map: 1 Operation not permitted
Fix it.
Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Shahid Habib noticed that when xdp1 was killed from a different console the xdp
program was not cleaned-up properly in the kernel and it continued to forward
traffic.
Most of the applications in samples/bpf cleanup properly, but only when getting
SIGINT. Since kill defaults to using SIGTERM, add support to cleanup when the
application receives either SIGINT or SIGTERM.
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Reported-by: Shahid Habib <shahid.habib@broadcom.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit b5cdae3291f7 ("net: Generic XDP") we automatically fall
back to a generic XDP variant if the driver does not support native
XDP. Allow for an option where the user can specify that always the
native XDP variant should be selected and in case it's not supported
by a driver, just bail out.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The kernel side of XDP_FLAGS_SKB_MODE is unsigned, and the rtnetlink
IFLA_XDP_FLAGS is defined as NLA_U32. Thus, userspace programs under
samples/bpf/ should use the correct type.
Fixes: 3993f2cb983b ("samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnel")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add option to xdp1 and xdp_tx_iptunnel to insert xdp program in
SKB_MODE:
- update set_link_xdp_fd to take a flags argument that is added to the
RTM_SETLINK message
- Add -S option to xdp1 and xdp_tx_iptunnel user code. When passed in
XDP_FLAGS_SKB_MODE is set in the flags arg passed to set_link_xdp_fd
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Switch all of the sample code to use the function names from
tools/lib/bpf so that they're consistent with that, and to declare their
own log buffers. This allow the next commit to be purely devoted to
getting rid of the duplicate library in samples/bpf.
Committer notes:
Testing it:
On a fedora rawhide container, with clang/llvm 3.9, sharing the host
linux kernel git tree:
# make O=/tmp/build/linux/ headers_install
# make O=/tmp/build/linux -C samples/bpf/
Since I forgot to make it privileged, just tested it outside the
container, using what it generated:
# uname -a
Linux jouet 4.9.0-rc8+ #1 SMP Mon Dec 12 11:20:49 BRT 2016 x86_64 x86_64 x86_64 GNU/Linux
# cd /var/lib/docker/devicemapper/mnt/c43e09a53ff56c86a07baf79847f00e2cc2a17a1e2220e1adbf8cbc62734feda/rootfs/tmp/build/linux/samples/bpf/
# ls -la offwaketime
-rwxr-xr-x. 1 root root 24200 Dec 15 12:19 offwaketime
# file offwaketime
offwaketime: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=c940d3f127d5e66cdd680e42d885cb0b64f8a0e4, not stripped
# readelf -SW offwaketime_kern.o | grep PROGBITS
[ 2] .text PROGBITS 0000000000000000 000040 000000 00 AX 0 0 4
[ 3] kprobe/try_to_wake_up PROGBITS 0000000000000000 000040 0000d8 00 AX 0 0 8
[ 5] tracepoint/sched/sched_switch PROGBITS 0000000000000000 000118 000318 00 AX 0 0 8
[ 7] maps PROGBITS 0000000000000000 000430 000050 00 WA 0 0 4
[ 8] license PROGBITS 0000000000000000 000480 000004 00 WA 0 0 1
[ 9] version PROGBITS 0000000000000000 000484 000004 00 WA 0 0 4
# ./offwaketime | head -5
swapper/1;start_secondary;cpu_startup_entry;schedule_preempt_disabled;schedule;__schedule;-;---;; 106
CPU 0/KVM;entry_SYSCALL_64_fastpath;sys_ioctl;do_vfs_ioctl;kvm_vcpu_ioctl;kvm_arch_vcpu_ioctl_run;kvm_vcpu_block;schedule;__schedule;-;try_to_wake_up;swake_up_locked;swake_up;apic_timer_expired;apic_timer_fn;__hrtimer_run_queues;hrtimer_interrupt;local_apic_timer_interrupt;smp_apic_timer_interrupt;__irqentry_text_start;cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary;;swapper/3 2
Compositor;entry_SYSCALL_64_fastpath;sys_futex;do_futex;futex_wait;futex_wait_queue_me;schedule;__schedule;-;try_to_wake_up;futex_requeue;do_futex;sys_futex;entry_SYSCALL_64_fastpath;;SoftwareVsyncTh 5
firefox;entry_SYSCALL_64_fastpath;sys_poll;do_sys_poll;poll_schedule_timeout;schedule_hrtimeout_range;schedule_hrtimeout_range_clock;schedule;__schedule;-;try_to_wake_up;pollwake;__wake_up_common;__wake_up_sync_key;pipe_write;__vfs_write;vfs_write;sys_write;entry_SYSCALL_64_fastpath;;Timer 13
JS Helper;entry_SYSCALL_64_fastpath;sys_futex;do_futex;futex_wait;futex_wait_queue_me;schedule;__schedule;-;try_to_wake_up;do_futex;sys_futex;entry_SYSCALL_64_fastpath;;firefox 2
#
Signed-off-by: Joe Stringer <joe@ovn.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20161214224342.12858-2-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The XDP prog checks if the incoming packet matches any VIP:PORT
combination in the BPF hashmap. If it is, it will encapsulate
the packet with a IPv4/v6 header as instructed by the value of
the BPF hashmap and then XDP_TX it out.
The VIP:PORT -> IP-Encap-Info can be specified by the cmd args
of the user prog.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
1) The test_lru_map and test_lru_dist fails building on my machine since
the sys/resource.h header is not included.
2) test_verifier fails in one test case where we try to call an invalid
function, since the verifier log output changed wrt printing function
names.
3) Current selftest suite code relies on sysconf(_SC_NPROCESSORS_CONF) for
retrieving the number of possible CPUs. This is broken at least in our
scenario and really just doesn't work.
glibc tries a number of things for retrieving _SC_NPROCESSORS_CONF.
First it tries equivalent of /sys/devices/system/cpu/cpu[0-9]* | wc -l,
if that fails, depending on the config, it either tries to count CPUs
in /proc/cpuinfo, or returns the _SC_NPROCESSORS_ONLN value instead.
If /proc/cpuinfo has some issue, it returns just 1 worst case. This
oddity is nothing new [1], but semantics/behaviour seems to be settled.
_SC_NPROCESSORS_ONLN will parse /sys/devices/system/cpu/online, if
that fails it looks into /proc/stat for cpuX entries, and if also that
fails for some reason, /proc/cpuinfo is consulted (and returning 1 if
unlikely all breaks down).
While that might match num_possible_cpus() from the kernel in some
cases, it's really not guaranteed with CPU hotplugging, and can result
in a buffer overflow since the array in user space could have too few
number of slots, and on perpcu map lookup, the kernel will write beyond
that memory of the value buffer.
William Tu reported such mismatches:
[...] The fact that sysconf(_SC_NPROCESSORS_CONF) != num_possible_cpu()
happens when CPU hotadd is enabled. For example, in Fusion when
setting vcpu.hotadd = "TRUE" or in KVM, setting ./qemu-system-x86_64
-smp 2, maxcpus=4 ... the num_possible_cpu() will be 4 and sysconf()
will be 2 [2]. [...]
Documentation/cputopology.txt says /sys/devices/system/cpu/possible
outputs cpu_possible_mask. That is the same as in num_possible_cpus(),
so first step would be to fix the _SC_NPROCESSORS_CONF calls with our
own implementation. Later, we could add support to bpf(2) for passing
a mask via CPU_SET(3), for example, to just select a subset of CPUs.
BPF samples code needs this fix as well (at least so that people stop
copying this). Thus, define bpf_num_possible_cpus() once in selftests
and import it from there for the sample code to avoid duplicating it.
The remaining sysconf(_SC_NPROCESSORS_CONF) in samples are unrelated.
After all three issues are fixed, the test suite runs fine again:
# make run_tests | grep self
selftests: test_verifier [PASS]
selftests: test_maps [PASS]
selftests: test_lru_map [PASS]
selftests: test_kmod.sh [PASS]
[1] https://www.sourceware.org/ml/libc-alpha/2011-06/msg00079.html
[2] https://www.mail-archive.com/netdev@vger.kernel.org/msg121183.html
Fixes: 3059303f59cf ("samples/bpf: update tracex[23] examples to use per-cpu maps")
Fixes: 86af8b4191d2 ("Add sample for adding simple drop program to link")
Fixes: df570f577231 ("samples/bpf: unit test for BPF_MAP_TYPE_PERCPU_ARRAY")
Fixes: e15596717948 ("samples/bpf: unit test for BPF_MAP_TYPE_PERCPU_HASH")
Fixes: ebb676daa1a3 ("bpf: Print function name in addition to function id")
Fixes: 5db58faf989f ("bpf: Add tests for the LRU bpf_htab")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: William Tu <u9012063@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a sample program that only drops packets at the BPF_PROG_TYPE_XDP_RX
hook of a link. With the drop-only program, observed single core rate is
~20Mpps.
Other tests were run, for instance without the dropcnt increment or
without reading from the packet header, the packet rate was mostly
unchanged.
$ perf record -a samples/bpf/xdp1 $(</sys/class/net/eth0/ifindex)
proto 17: 20403027 drops/s
./pktgen_sample03_burst_single_flow.sh -i $DEV -d $IP -m $MAC -t 4
Running... ctrl^C to stop
Device: eth4@0
Result: OK: 11791017(c11788327+d2689) usec, 59622913 (60byte,0frags)
5056638pps 2427Mb/sec (2427186240bps) errors: 0
Device: eth4@1
Result: OK: 11791012(c11787906+d3106) usec, 60526944 (60byte,0frags)
5133311pps 2463Mb/sec (2463989280bps) errors: 0
Device: eth4@2
Result: OK: 11791019(c11788249+d2769) usec, 59868091 (60byte,0frags)
5077431pps 2437Mb/sec (2437166880bps) errors: 0
Device: eth4@3
Result: OK: 11795039(c11792403+d2636) usec, 59483181 (60byte,0frags)
5043067pps 2420Mb/sec (2420672160bps) errors: 0
perf report --no-children:
26.05% ksoftirqd/0 [mlx4_en] [k] mlx4_en_process_rx_cq
17.84% ksoftirqd/0 [mlx4_en] [k] mlx4_en_alloc_frags
5.52% ksoftirqd/0 [mlx4_en] [k] mlx4_en_free_frag
4.90% swapper [kernel.vmlinux] [k] poll_idle
4.14% ksoftirqd/0 [kernel.vmlinux] [k] get_page_from_freelist
2.78% ksoftirqd/0 [kernel.vmlinux] [k] __free_pages_ok
2.57% ksoftirqd/0 [kernel.vmlinux] [k] bpf_map_lookup_elem
2.51% swapper [mlx4_en] [k] mlx4_en_process_rx_cq
1.94% ksoftirqd/0 [kernel.vmlinux] [k] percpu_array_map_lookup_elem
1.45% swapper [mlx4_en] [k] mlx4_en_alloc_frags
1.35% ksoftirqd/0 [kernel.vmlinux] [k] free_one_page
1.33% swapper [kernel.vmlinux] [k] intel_idle
1.04% ksoftirqd/0 [mlx4_en] [k] 0x000000000001c5c5
0.96% ksoftirqd/0 [mlx4_en] [k] 0x000000000001c58d
0.93% ksoftirqd/0 [mlx4_en] [k] 0x000000000001c6ee
0.92% ksoftirqd/0 [mlx4_en] [k] 0x000000000001c6b9
0.89% ksoftirqd/0 [kernel.vmlinux] [k] __alloc_pages_nodemask
0.83% ksoftirqd/0 [mlx4_en] [k] 0x000000000001c686
0.83% ksoftirqd/0 [mlx4_en] [k] 0x000000000001c5d5
0.78% ksoftirqd/0 [mlx4_en] [k] mlx4_alloc_pages.isra.23
0.77% ksoftirqd/0 [mlx4_en] [k] 0x000000000001c5b4
0.77% ksoftirqd/0 [kernel.vmlinux] [k] net_rx_action
machine specs:
receiver - Intel E5-1630 v3 @ 3.70GHz
sender - Intel E5645 @ 2.40GHz
Mellanox ConnectX-3 @40G
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
