Age | Commit message (Collapse) | Author |
|
struct sock's sk_rcvtimeo is initialized to
LONG_MAX/MAX_SCHEDULE_TIMEOUT in sock_init_data. Calling
mod_delayed_work with a timeout of LONG_MAX causes spurious execution of
the work function. timer->expires is set equal to jiffies + LONG_MAX.
When timer_base->clk falls behind the current value of jiffies,
the delta between timer_base->clk and jiffies + LONG_MAX causes the
expiration to be in the past. Returning early from strp_start_timer if
timeo == LONG_MAX solves this problem.
Found while testing net/tls_sw recv path.
Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages")
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
strp_data_ready resets strp->need_bytes to 0 if strp_peek_len indicates
that the remainder of the message has been received. However,
do_strp_work does not reset strp->need_bytes to 0. If do_strp_work
completes a partial message, the value of strp->need_bytes will continue
to reflect the needed bytes of the previous message, causing
future invocations of strp_data_ready to return early if
strp->need_bytes is less than strp_peek_len. Resetting strp->need_bytes
to 0 in __strp_recv on handing a full message to the upper layer solves
this problem.
__strp_recv also calculates strp->need_bytes using stm->accum_len before
stm->accum_len has been incremented by cand_len. This can cause
strp->need_bytes to be equal to the full length of the message instead
of the full length minus the accumulated length. This, in turn, causes
strp_data_ready to return early, even when there is sufficient data to
complete the partial message. Incrementing stm->accum_len before using
it to calculate strp->need_bytes solves this problem.
Found while testing net/tls_sw recv path.
Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages")
Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
strp_parser_err is called with a negative code everywhere, which then
calls abort_parser with a negative code. strp_msg_timeout calls
abort_parser directly with a positive code. Negate ETIMEDOUT
to match signed-ness of other calls.
The default abort_parser callback, strp_abort_strp, sets
sk->sk_err to err. Also negate the error here so sk_err always
holds a positive value, as the rest of the net code expects. Currently
a negative sk_err can result in endless loops, or user code that
thinks it actually sent/received err bytes.
Found while testing net/tls_sw recv path.
Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages")
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
strparser wants to check socket ownership without producing any
warnings. As indicated by the comment in the code, it is permissible
for owned_by_user to return true.
Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-and-tested-by: <syzbot+c91c53af67f9ebe599a337d2e70950366153b295@syzkaller.appspotmail.com>
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sock lock may be taken in the message timer function which is a
problem since timers run in BH. Instead of timers use delayed_work.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: bbb03029a899 ("strparser: Generalize strparser")
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit bbb03029a899 ("strparser: Generalize strparser") added more
function pointers to 'struct strp_callbacks'; however, kcm_attach() was
not updated to initialize them. This could cause the ->lock() and/or
->unlock() function pointers to be set to garbage values, causing a
crash in strp_work().
Fix the bug by moving the callback structs into static memory, so
unspecified members are zeroed. Also constify them while we're at it.
This bug was found by syzkaller, which encountered the following splat:
IP: 0x55
PGD 3b1ca067
P4D 3b1ca067
PUD 3b12f067
PMD 0
Oops: 0010 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 2 PID: 1194 Comm: kworker/u8:1 Not tainted 4.13.0-rc4-next-20170811 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: kstrp strp_work
task: ffff88006bb0e480 task.stack: ffff88006bb10000
RIP: 0010:0x55
RSP: 0018:ffff88006bb17540 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff88006ce4bd60 RCX: 0000000000000000
RDX: 1ffff1000d9c97bd RSI: 0000000000000000 RDI: ffff88006ce4bc48
RBP: ffff88006bb17558 R08: ffffffff81467ab2 R09: 0000000000000000
R10: ffff88006bb17438 R11: ffff88006bb17940 R12: ffff88006ce4bc48
R13: ffff88003c683018 R14: ffff88006bb17980 R15: ffff88003c683000
FS: 0000000000000000(0000) GS:ffff88006de00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000055 CR3: 000000003c145000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
process_one_work+0xbf3/0x1bc0 kernel/workqueue.c:2098
worker_thread+0x223/0x1860 kernel/workqueue.c:2233
kthread+0x35e/0x430 kernel/kthread.c:231
ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
Code: Bad RIP value.
RIP: 0x55 RSP: ffff88006bb17540
CR2: 0000000000000055
---[ end trace f0e4920047069cee ]---
Here is a C reproducer (requires CONFIG_BPF_SYSCALL=y and
CONFIG_AF_KCM=y):
#include <linux/bpf.h>
#include <linux/kcm.h>
#include <linux/types.h>
#include <stdint.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#include <sys/syscall.h>
#include <unistd.h>
static const struct bpf_insn bpf_insns[3] = {
{ .code = 0xb7 }, /* BPF_MOV64_IMM(0, 0) */
{ .code = 0x95 }, /* BPF_EXIT_INSN() */
};
static const union bpf_attr bpf_attr = {
.prog_type = 1,
.insn_cnt = 2,
.insns = (uintptr_t)&bpf_insns,
.license = (uintptr_t)"",
};
int main(void)
{
int bpf_fd = syscall(__NR_bpf, BPF_PROG_LOAD,
&bpf_attr, sizeof(bpf_attr));
int inet_fd = socket(AF_INET, SOCK_STREAM, 0);
int kcm_fd = socket(AF_KCM, SOCK_DGRAM, 0);
ioctl(kcm_fd, SIOCKCMATTACH,
&(struct kcm_attach) { .fd = inet_fd, .bpf_fd = bpf_fd });
}
Fixes: bbb03029a899 ("strparser: Generalize strparser")
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@quantonium.net>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is useful to allow strparser to init sockets before the read_sock
callback has been established.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Generalize strparser from more than just being used in conjunction
with read_sock. strparser will also be used in the send path with
zero proxy. The primary change is to create strp_process function
that performs the critical processing on skbs. The documentation
is also updated to reflect the new uses.
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes: 43a0c6751a32 ("strparser: Stream parser for messages")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With m68k-linux-gnu-gcc-4.1:
net/strparser/strparser.c: In function ‘strp_recv’:
net/strparser/strparser.c:98: warning: ‘err’ may be used uninitialized in this function
Pass "len" (which is an error code when negative) instead of the
uninitialized "err" variable to fix this.
Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kcm and strparser need to work with any type of stream socket not just
TCP. Eliminate references to TCP and call generic proto_ops functions of
read_sock and peek_len. Also in strp_init check if the socket support
the proto_ops read_sock and peek_len.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the upper layer unpauses a stream parser connection we need to
queue rx_work to make sure no events are missed.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sk_user_data mismatch between what kcm expects (psock) and what strparser expects (strparser).
Queued rx_work, for example calling strp_check_rcv after socket buffer changes, will never complete.
sk_user_data is unused in strparser, so just remove the check.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces a utility for parsing application layer protocol
messages in a TCP stream. This is a generalization of the mechanism
implemented of Kernel Connection Multiplexor.
The API includes a context structure, a set of callbacks, utility
functions, and a data ready function.
A stream parser instance is defined by a strparse structure that
is bound to a TCP socket. The function to initialize the structure
is:
int strp_init(struct strparser *strp, struct sock *csk,
struct strp_callbacks *cb);
csk is the TCP socket being bound to and cb are the parser callbacks.
The upper layer calls strp_tcp_data_ready when data is ready on the lower
socket for strparser to process. This should be called from a data_ready
callback that is set on the socket:
void strp_tcp_data_ready(struct strparser *strp);
A parser is bound to a TCP socket by setting data_ready function to
strp_tcp_data_ready so that all receive indications on the socket
go through the parser. This is assumes that sk_user_data is set to
the strparser structure.
There are four callbacks.
- parse_msg is called to parse the message (returns length or error).
- rcv_msg is called when a complete message has been received
- read_sock_done is called when data_ready function exits
- abort_parser is called to abort the parser
The input to parse_msg is an skbuff which contains next message under
construction. The backend processing of parse_msg will parse the
application layer protocol headers to determine the length of
the message in the stream. The possible return values are:
>0 : indicates length of successfully parsed message
0 : indicates more data must be received to parse the message
-ESTRPIPE : current message should not be processed by the
kernel, return control of the socket to userspace which
can proceed to read the messages itself
other < 0 : Error is parsing, give control back to userspace
assuming that synchronzation is lost and the stream
is unrecoverable (application expected to close TCP socket)
In the case of error return (< 0) strparse will stop the parser
and report and error to userspace. The application must deal
with the error. To handle the error the strparser is unbound
from the TCP socket. If the error indicates that the stream
TCP socket is at recoverable point (ESTRPIPE) then the application
can read the TCP socket to process the stream. Once the application
has dealt with the exceptions in the stream, it may again bind the
socket to a strparser to continue data operations.
Note that ENODATA may be returned to the application. In this case
parse_msg returned -ESTRPIPE, however strparser was unable to maintain
synchronization of the stream (i.e. some of the message in question
was already read by the parser).
strp_pause and strp_unpause are used to provide flow control. For
instance, if rcv_msg is called but the upper layer can't immediately
consume the message it can hold the message and pause strparser.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|