summaryrefslogtreecommitdiff
path: root/net/smc/smc_ib.h
AgeCommit message (Collapse)Author
2019-02-21net/smc: rework pnet tableHans Wippel
If a device does not have a pnetid, users can set a temporary pnetid for said device in the pnet table. This patch reworks the pnet table to make it more flexible. Multiple entries with the same pnetid but differing devices are now allowed. Additionally, the netlink interface now sends each mapping from pnetid to device separately to the user while maintaining the message format existing applications might expect. Also, the SMC data structure for ib devices already has a pnetid attribute. So, it is used to store the user defined pnetids. As a result, the pnet table entries are only used for netdevs. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25net/smc: use correct vlan gid of RoCE deviceUrsula Braun
SMC code uses the base gid for VLAN traffic. The gids exchanged in the CLC handshake and the gid index used for the QP have to switch from the base gid to the appropriate vlan gid. When searching for a matching IB device port for a certain vlan device, it does not make sense to return an IB device port, which is not enabled for the used vlan_id. Add another check whether a vlan gid exists for a certain IB device port. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30net/smc: add pnetid supportUrsula Braun
s390 hardware supports the definition of a so-call Physical NETwork IDentifier (short PNETID) per network device port. These PNETIDS can be used to identify network devices that are attached to the same physical network (broadcast domain). On s390 try to use the PNETID of the ethernet device port used for initial connecting, and derive the IB device port used for SMC RDMA traffic. On platforms without PNETID support fall back to the existing solution of a configured pnet table. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30net/smc: determine port attributes independent from pnet tableUrsula Braun
For SMC it is important to know the current port state of RoCE devices. Monitoring port states has been triggered, when a RoCE device was added to the pnet table. To support future alternatives to the pnet table the monitoring of ports is made independent of the existence of a pnet table. It starts once the smc_ib_device is established. Due to this change smc_ib_remember_port_attr() is now a local function and shuffling its location and the location of its used functions makes any forward references obsolete. And the duplicate SMC_MAX_PORTS definition is removed. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-29net/smc: synchronize buffer usage with deviceUrsula Braun
Usage of send buffer "sndbuf" is synced (a) before filling sndbuf for cpu access (b) after filling sndbuf for device access Usage of receive buffer "RMB" is synced (a) before reading RMB content for cpu access (b) after reading RMB content for device access Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: introduce sg-logic for send buffersUrsula Braun
SMC send buffers are processed the same way as RMBs. Since RMBs have been converted to sg-logic, do the same for send buffers. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: use separate memory regions for RMBsUrsula Braun
SMC currently uses the unsafe_global_rkey of the protection domain, which exposes all memory for remote reads and writes once a connection is established. This patch introduces separate memory regions with separate rkeys for every RMB. Now the unsafe_global_rkey of the protection domain is no longer needed. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: introduce sg-logic for RMBsUrsula Braun
The follow-on patch makes use of ib_map_mr_sg() when introducing separate memory regions for RMBs. This function is based on scatterlists; thus this patch introduces scatterlists for RMBs. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16smc: switch to usage of IB_PD_UNSAFE_GLOBAL_RKEYUrsula Braun
Currently, SMC enables remote access to physical memory when a user has successfully configured and established an SMC-connection until ten minutes after the last SMC connection is closed. Because this is considered a security risk, drivers are supposed to use IB_PD_UNSAFE_GLOBAL_RKEY in such a case. This patch changes the current SMC code to use IB_PD_UNSAFE_GLOBAL_RKEY. This improves user awareness, but does not remove the security risk itself. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-30drivers: add explicit interrupt.h includesFlorian Westphal
These files all use functions declared in interrupt.h, but currently rely on implicit inclusion of this file (via netns/xfrm.h). That won't work anymore when the flow cache is removed so include that header where needed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12smc: ETH_ALEN as memcpy length for mac addressesUrsula Braun
When creating an SMC connection, there is a CLC (connection layer control) handshake to prepare for RDMA traffic. The corresponding code is part of commit 0cfdd8f92cac ("smc: connection and link group creation"). Mac addresses to be exchanged in the handshake are copied with a wrong length of 12 instead of 6 bytes. Following code overwrites the wrongly copied code, but nevertheless the correct length should already be used for the preceding mac address copying. Use ETH_ALEN for the memcpy length with mac addresses. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Fixes: 0cfdd8f92cac ("smc: connection and link group creation") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09smc: initialize IB transport incl. PD, MR, QP, CQ, event, WRUrsula Braun
Prepare the link for RDMA transport: Create a queue pair (QP) and move it into the state Ready-To-Receive (RTR). Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09smc: work request (WR) base for use by LLC and CDCUrsula Braun
The base containers for RDMA transport are work requests and completion queue entries processed through Infiniband verbs: * allocate and initialize these areas * map these areas to DMA * implement the basic communication consisting of work request posting and receival of completion queue events Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09smc: remote memory buffers (RMBs)Ursula Braun
* allocate data RMB memory for sending and receiving * size depends on the maximum socket send and receive buffers * allocated RMBs are kept during life time of the owning link group * map the allocated RMBs to DMA Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09smc: introduce SMC as an IB-clientUrsula Braun
* create a list of SMC IB-devices Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>