summaryrefslogtreecommitdiff
path: root/net/iucv/iucv.c
AgeCommit message (Collapse)Author
2023-09-19s390: use control register bit definesHeiko Carstens
Use control register bit defines instead of plain numbers where possible. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-09-19s390/ctlreg: add local and system prefix to some functionsHeiko Carstens
Add local and system prefix to some functions to clarify they change control register contents on either the local CPU or the on all CPUs. This results in the following API: Two defines which load and save multiple control registers. The defines correlate with the following C prototypes: void __local_ctl_load(unsigned long *, unsigned int cr_low, unsigned int cr_high); void __local_ctl_store(unsigned long *, unsigned int cr_low, unsigned int cr_high); Two functions which locally set or clear one bit for a specified control register: void local_ctl_set_bit(unsigned int cr, unsigned int bit); void local_ctl_clear_bit(unsigned int cr, unsigned int bit); Two functions which set or clear one bit for a specified control register on all CPUs: void system_ctl_set_bit(unsigned int cr, unsigned int bit); void system_ctl_clear_bit(unsigend int cr, unsigned int bit); Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-03-16net/iucv: Fix size of interrupt dataAlexandra Winter
iucv_irq_data needs to be 4 bytes larger. These bytes are not used by the iucv module, but written by the z/VM hypervisor in case a CPU is deconfigured. Reported as: BUG dma-kmalloc-64 (Not tainted): kmalloc Redzone overwritten ----------------------------------------------------------------------------- 0x0000000000400564-0x0000000000400567 @offset=1380. First byte 0x80 instead of 0xcc Allocated in iucv_cpu_prepare+0x44/0xd0 age=167839 cpu=2 pid=1 __kmem_cache_alloc_node+0x166/0x450 kmalloc_node_trace+0x3a/0x70 iucv_cpu_prepare+0x44/0xd0 cpuhp_invoke_callback+0x156/0x2f0 cpuhp_issue_call+0xf0/0x298 __cpuhp_setup_state_cpuslocked+0x136/0x338 __cpuhp_setup_state+0xf4/0x288 iucv_init+0xf4/0x280 do_one_initcall+0x78/0x390 do_initcalls+0x11a/0x140 kernel_init_freeable+0x25e/0x2a0 kernel_init+0x2e/0x170 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 Freed in iucv_init+0x92/0x280 age=167839 cpu=2 pid=1 __kmem_cache_free+0x308/0x358 iucv_init+0x92/0x280 do_one_initcall+0x78/0x390 do_initcalls+0x11a/0x140 kernel_init_freeable+0x25e/0x2a0 kernel_init+0x2e/0x170 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 Slab 0x0000037200010000 objects=32 used=30 fp=0x0000000000400640 flags=0x1ffff00000010200(slab|head|node=0|zone=0| Object 0x0000000000400540 @offset=1344 fp=0x0000000000000000 Redzone 0000000000400500: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 0000000000400510: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 0000000000400520: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 0000000000400530: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 0000000000400540: 00 01 00 03 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object 0000000000400550: f3 86 81 f2 f4 82 f8 82 f0 f0 f0 f0 f0 f0 f0 f2 ................ Object 0000000000400560: 00 00 00 00 80 00 00 00 cc cc cc cc cc cc cc cc ................ Object 0000000000400570: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 0000000000400580: cc cc cc cc cc cc cc cc ........ Padding 00000000004005d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Padding 00000000004005e4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Padding 00000000004005f4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ CPU: 6 PID: 121030 Comm: 116-pai-crypto. Not tainted 6.3.0-20230221.rc0.git4.99b8246b2d71.300.fc37.s390x+debug #1 Hardware name: IBM 3931 A01 704 (z/VM 7.3.0) Call Trace: [<000000032aa034ec>] dump_stack_lvl+0xac/0x100 [<0000000329f5a6cc>] check_bytes_and_report+0x104/0x140 [<0000000329f5aa78>] check_object+0x370/0x3c0 [<0000000329f5ede6>] free_debug_processing+0x15e/0x348 [<0000000329f5f06a>] free_to_partial_list+0x9a/0x2f0 [<0000000329f5f4a4>] __slab_free+0x1e4/0x3a8 [<0000000329f61768>] __kmem_cache_free+0x308/0x358 [<000000032a91465c>] iucv_cpu_dead+0x6c/0x88 [<0000000329c2fc66>] cpuhp_invoke_callback+0x156/0x2f0 [<000000032aa062da>] _cpu_down.constprop.0+0x22a/0x5e0 [<0000000329c3243e>] cpu_device_down+0x4e/0x78 [<000000032a61dee0>] device_offline+0xc8/0x118 [<000000032a61e048>] online_store+0x60/0xe0 [<000000032a08b6b0>] kernfs_fop_write_iter+0x150/0x1e8 [<0000000329fab65c>] vfs_write+0x174/0x360 [<0000000329fab9fc>] ksys_write+0x74/0x100 [<000000032aa03a5a>] __do_syscall+0x1da/0x208 [<000000032aa177b2>] system_call+0x82/0xb0 INFO: lockdep is turned off. FIX dma-kmalloc-64: Restoring kmalloc Redzone 0x0000000000400564-0x0000000000400567=0xcc FIX dma-kmalloc-64: Object at 0x0000000000400540 not freed Fixes: 2356f4cb1911 ("[S390]: Rewrite of the IUCV base code, part 2") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20230315131435.4113889-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-22s390/iucv: sort out physical vs virtual pointers usageAlexander Gordeev
Fix virtual vs physical address confusion (which currently are the same). Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-19net/iucv: fix kernel doc commentsHeiko Carstens
Fix kernel doc comments where appropriate or remove incorrect kernel doc indicators. Also move kernel doc comments directly before functions. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-09net/iucv: Replace deprecated CPU-hotplug functions.Sebastian Andrzej Siewior
The functions get_online_cpus() and put_online_cpus() have been deprecated during the CPU hotplug rework. They map directly to cpus_read_lock() and cpus_read_unlock(). Replace deprecated CPU-hotplug functions with the official version. The behavior remains unchanged. Cc: Julian Wiedmann <jwi@linux.ibm.com> Cc: Karsten Graul <kgraul@linux.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-s390@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-09net/iucv: get rid of register asm usageHeiko Carstens
Using register asm statements has been proven to be very error prone, especially when using code instrumentation where gcc may add function calls, which clobbers register contents in an unexpected way. Therefore get rid of register asm statements in iucv code, even though there is currently nothing wrong with it. This way we know for sure that the above mentioned bug class won't be introduced here. Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01s390: iucv: Avoid field over-reading memcpy()Kees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally reading across neighboring array fields. Add a wrapping struct to serve as the memcpy() source so the compiler can perform appropriate bounds checking, avoiding this future warning: In function '__fortify_memcpy', inlined from 'iucv_message_pending' at net/iucv/iucv.c:1663:4: ./include/linux/fortify-string.h:246:4: error: call to '__read_overflow2_field' declared with attribute error: detected read beyond size of field (2nd parameter) Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-03net/iucv: fix indentation in __iucv_message_receive()Julian Wiedmann
smatch complains about net/iucv/iucv.c:1119 __iucv_message_receive() warn: inconsistent indenting While touching this line, also make the return logic consistent and thus get rid of a goto label. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-30treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD()Kees Cook
This converts all the existing DECLARE_TASKLET() (and ...DISABLED) macros with DECLARE_TASKLET_OLD() in preparation for refactoring the tasklet callback type. All existing DECLARE_TASKLET() users had a "0" data argument, it has been removed here as well. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-19net/iucv: remove pm supportJulian Wiedmann
commit 394216275c7d ("s390: remove broken hibernate / power management support") removed support for ARCH_HIBERNATION_POSSIBLE from s390. So drop the unused pm ops from the s390-only iucv bus driver. CC: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 153Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 77 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.837555891@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05net/iucv: declare iucv_path_table_empty() as staticJulian Wiedmann
Fixes a compile warning. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net/iucv: Use explicit clean up labels in iucv_init()Sebastian Andrzej Siewior
Ursula suggested to use explicit labels for clean up in the error path instead of one `out_free' label, which handles multiple exits, introduced in commit 38b482929e8f ("net/iucv: Convert to hotplug state machine"). Suggested-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-s390@vger.kernel.org Cc: netdev@vger.kernel.org Cc: rt@linutronix.de Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20161124161013.dukr42y2nwscosk6@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-22net/iucv: Convert to hotplug state machineSebastian Andrzej Siewior
Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. The smp function calls in the online/downprep callbacks are not required as the callback is guaranteed to be invoked on the upcoming/outgoing cpu. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-s390@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Ursula Braun <ubraun@linux.vnet.ibm.com> Cc: rt@linuxtronix.de Link: http://lkml.kernel.org/r/20161117183541.8588-13-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-06-28s390/iucv: use basic blocks for iucv inline assembliesHeiko Carstens
Use only simple inline assemblies which consist of a single basic block if the register asm construct is being used. Otherwise gcc would generate broken code if the compiler option --sanitize-coverage=trace-pc would be used. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-21s390/iucv: do not use arrays as argumentUrsula Braun
The iucv code uses arrays as arguments. Even though this does not really cause a problem, it could be misleading, since the compiler turns array arguments into just a pointer argument. To be more precise this patch changes the array arguments into pointers. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10iucv: Convert pr_warning to pr_warnJoe Perches
Use the more common pr_warn. Coalesce formats. Realign arguments. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull second set of s390 patches from Martin Schwidefsky: "The second part of Heikos uaccess rework, the page table walker for uaccess is now a thing of the past (yay!) The code change to fix the theoretical TLB flush problem allows us to add a TLB flush optimization for zEC12, this machine has new instructions that allow to do CPU local TLB flushes for single pages and for all pages of a specific address space. Plus the usual bug fixing and some more cleanup" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/uaccess: rework uaccess code - fix locking issues s390/mm,tlb: optimize TLB flushing for zEC12 s390/mm,tlb: safeguard against speculative TLB creation s390/irq: Use defines for external interruption codes s390/irq: Add defines for external interruption codes s390/sclp: add timeout for queued requests kvm/s390: also set guest pages back to stable on kexec/kdump lcs: Add missing destroy_timer_on_stack() s390/tape: Add missing destroy_timer_on_stack() s390/tape: Use del_timer_sync() s390/3270: fix crash with multiple reset device requests s390/bitops,atomic: add missing memory barriers s390/zcrypt: add length check for aligned data to avoid overflow in msg-type 6
2014-04-03s390/irq: Use defines for external interruption codesThomas Huth
Use the new defines for external interruption codes to get rid of "magic" numbers in the s390 source code. And while we're at it, also rename the (un-)register_external_interrupt function to something shorter so that this patch does not exceed the 80 columns all over the place. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-20net/iucv/iucv.c: Fix CPU hotplug callback registrationSrivatsa S. Bhat
Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); Fix the code in net/iucv/iucv.c by using this latter form of callback registration. Also, provide helper functions to perform the common memory allocations and frees, to condense repetitive code. Cc: Ursula Braun <ursula.braun@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-14net: delete __cpuinit usage from all net filesPaul Gortmaker
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the net/* uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-02-14iucv: fix kernel panic at rebootHendrik Brueckner
The iucv base layer is initialized during the registration of the first iucv handler. If no handler is registered and the iucv_reboot_event() notifier is called, a missing check can cause a kernel panic in iucv_block_cpu(). To solve this issue, check the IRQ masks invoke iucv_block_cpu() for enabled CPUs only. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-08s390/irq: remove split irq fields from /proc/statHeiko Carstens
Now that irq sum accounting for /proc/stat's "intr" line works again we have the oddity that the sum field (first field) contains only the sum of the second (external irqs) and third field (I/O interrupts). The reason for that is that these two fields are already sums of all other fields. So if we would sum up everything we would count every interrupt twice. This is broken since the split interrupt accounting was merged two years ago: 052ff461c8427629aee887ccc27478fc7373237c "[S390] irq: have detailed statistics for interrupt types". To fix this remove the split interrupt fields from /proc/stat's "intr" line again and only have them in /proc/interrupts. This restores the old behaviour, seems to be the only sane fix and mimics a behaviour from other architectures where /proc/interrupts also contains more than /proc/stat's "intr" line does. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11[S390] irq: external interrupt code passingHeiko Carstens
The external interrupt handlers have a parameter called ext_int_code. Besides the name this paramter does not only contain the ext_int_code but in addition also the "cpu address" (POP) which caused the external interrupt. To make the code a bit more obvious pass a struct instead so the called function can easily distinguish between external interrupt code and cpu address. The cpu address field however is named "subcode" since some external interrupt sources do not pass a cpu address but a different parameter (or none at all). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-08-13iucv: introduce loadable iucv interfaceFrank Blaschka
This patch adds a symbol to dynamically load iucv functions. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-24[S390] iucv cr0 enablement bitMartin Schwidefsky
Do not set the cr0 enablement bit for iucv by default in head[31|64].S, move the enablement to iucv_init in the iucv base layer. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-26[S390] irq: merge irq.c and s390_ext.cHeiko Carstens
Merge irq.c and s390_ext.c into irq.c. That way all external interrupt related functions are together. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-13convert old cpumask API into new oneKOSAKI Motohiro
Adapt new API. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13iucv: get rid of compile warningUrsula Braun
-Wunused-but-set-variable generates a compile warning. The affected variable is removed. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-01-05[S390] irq: have detailed statistics for interrupt typesHeiko Carstens
Up to now /proc/interrupts only has statistics for external and i/o interrupts but doesn't split up them any further. This patch adds a line for every single interrupt source so that it is possible to easier tell what the machine is/was doing. Part of the output now looks like this; CPU0 CPU2 CPU4 EXT: 3898 4232 2305 I/O: 782 315 245 CLK: 1029 1964 727 [EXT] Clock Comparator IPI: 2868 2267 1577 [EXT] Signal Processor TMR: 0 0 0 [EXT] CPU Timer TAL: 0 0 0 [EXT] Timing Alert PFL: 0 0 0 [EXT] Pseudo Page Fault [...] NMI: 0 1 1 [NMI] Machine Checks Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cleanup lowcore access from external interruptsMartin Schwidefsky
Read external interrupts parameters from the lowcore in the first level interrupt handler in entry[64].S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-06-03net: use __packed annotationEric Dumazet
cleanup patch. Use new __packed annotation in net/ and include/ (except netfilter) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-27iucv: convert cpu notifier to return encapsulate errno valueAkinobu Mita
By the previous modification, the cpu notifier can return encapsulate errno value. This converts the cpu notifiers for iucv. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15const: constify remaining dev_pm_opsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-13iucv: add work_queue cleanup for suspendUrsula Braun
If iucv_work_queue is not empty during kernel freeze, a kernel panic occurs. This suspend-patch adds flushing of the work queue for pending connection requests and severing of remaining pending connections. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16iucv: use correct output register in iucv_query_maxconn()Hendrik Brueckner
The iucv_query_maxconn() function uses the wrong output register and stores the size of the interrupt buffer instead of the maximum number of connections. According to the QUERY IUCV function, general register 1 contains the maximum number of connections. If the maximum number of connections is not set properly, the following warning is displayed: Badness at /usr/src/kernel-source/2.6.30-39.x.20090806/net/iucv/iucv.c:1808 Modules linked in: netiucv fsm af_iucv sunrpc qeth_l3 dm_multipath dm_mod vmur qeth ccwgroup CPU: 0 Tainted: G W 2.6.30 #4 Process seq (pid: 16925, task: 0000000030e24a40, ksp: 000000003033bd98) Krnl PSW : 0404200180000000 000000000053b270 (iucv_external_interrupt+0x64/0x224) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 Krnl GPRS: 00000000011279c2 00000000014bdb70 0029000000000000 0000000000000029 000000000053b236 000000000001dba4 0000000000000000 0000000000859210 0000000000a67f68 00000000008a6100 000000003f83fb90 0000000000004000 000000003f8c7bc8 00000000005a2250 000000000053b236 000000003fc2fe08 Krnl Code: 000000000053b262: e33010000021 clg %r3,0(%r1) 000000000053b268: a7440010 brc 4,53b288 000000000053b26c: a7f40001 brc 15,53b26e >000000000053b270: c03000184134 larl %r3,8434d8 000000000053b276: eb220030000c srlg %r2,%r2,48 000000000053b27c: eb6ff0a00004 lmg %r6,%r15,160(%r15) 000000000053b282: c0f4fffff6a7 brcl 15,539fd0 000000000053b288: 4310a003 ic %r1,3(%r10) Call Trace: ([<000000000053b236>] iucv_external_interrupt+0x2a/0x224) [<000000000010e09e>] do_extint+0x132/0x190 [<00000000001184b6>] ext_no_vtime+0x1e/0x22 [<0000000000549f7a>] _spin_unlock_irqrestore+0x96/0xa4 ([<0000000000549f70>] _spin_unlock_irqrestore+0x8c/0xa4) [<00000000002101d6>] pipe_write+0x3da/0x5bc [<0000000000205d14>] do_sync_write+0xe4/0x13c [<0000000000206a7e>] vfs_write+0xae/0x15c [<0000000000206c24>] SyS_write+0x54/0xac [<0000000000117c8e>] sysc_noemu+0x10/0x16 [<00000042ff8defcc>] 0x42ff8defcc Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16iucv: fix iucv_buffer_cpumask check when calling IUCV functionsHendrik Brueckner
Prior to calling IUCV functions, the DECLARE BUFFER function must have been called for at least one CPU to receive IUCV interrupts. With commit "iucv: establish reboot notifier" (6c005961), a check has been introduced to avoid calling IUCV functions if the current CPU does not have an interrupt buffer declared. Because one interrupt buffer is sufficient, change the condition to ensure that one interrupt buffer is available. In addition, checking the buffer on the current CPU creates a race with CPU up/down notifications: before checking the buffer, the IUCV function might be interrupted by an smp_call_function() that retrieves the interrupt buffer for the current CPU. When the IUCV function continues, the check fails and -EIO is returned. If a buffer is available on any other CPU, the IUCV function call must be invoked (instead of failing with -EIO). Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16iucv: suspend/resume error msg for left over pathesUrsula Braun
During suspend IUCV exploiters have to close their IUCV connections. When restoring an image, it can be checked if all IUCV pathes had been closed before the Linux instance was suspended. If not, an error message is issued to indicate a problem in one of the used programs exploiting IUCV communication. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16[S390] pm: iucv power management callbacks.Ursula Braun
Patch calls the PM callback functions of iucv-bus devices, which are responsible for removal of their established iucv pathes. The PM freeze callback for the first iucv-bus device disables all iucv interrupts except the connection severed interrupt. The PM freeze callback for the last iucv-bus device shuts down iucv. The PM thaw callback for the first iucv-bus device re-enables iucv if it has been shut down during freeze. If freezing has been interrupted, it re-enables iucv interrupts according to the needs of iucv-exploiters. The PM restore callback for the first iucv-bus device re-enables iucv. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] iucv: establish reboot notifierUrsula Braun
To guarantee a proper cleanup, patch adds a reboot notifier to the iucv base code, which disables iucv interrupts, shuts down established iucv pathes, and removes iucv declarations for z/VM. Checks have to be added to the iucv-API functions, whether iucv-buffers removed at reboot time are still declared. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-04-23af_iucv: Support data in IUCV msg parameter lists (IPRMDATA)Hendrik Brueckner
The patch allows to send and receive data in the parameter list of an iucv message. The parameter list is an arry of 8 bytes that are used by af_iucv as follows: 0..6 7 bytes for socket data and 7 1 byte to store the data length. Instead of storing the data length directly, the difference between 0xFF and the data length is used. This convention does not interfere with the existing use of PRM messages for shutting down the send direction of an AF_IUCV socket (shutdown() operation). Data lenghts greater than 7 (or PRM message byte 8 is less than 0xF8) denotes to special messages. Currently, the special SEND_SHUTDOWN message is supported only. To use IPRM messages, both communicators must set the IUCV_IPRMDATA flag during path negotiation, i.e. in iucv_connect() and path_pending(). To be compatible to older af_iucv implementations, sending PRM messages is controlled by the socket option SO_IPRMDATA_MSG. Receiving PRM messages does not depend on the socket option (but requires the IUCV_IPRMDATA path flag to be set). Sending/Receiving data in the parameter list improves performance for small amounts of data by reducing message_completion() interrupts and memory copy operations. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23iucv: provide second per-cpu IUCV command parameter blockUrsula Braun
Some of the IUCV commands can be invoked in interrupt context. Those commands need a different per-cpu IUCV command parameter block, otherwise they might overwrite an IUCV command parameter of a not yet finished IUCV command invocation in process context. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-06s390: remove s390_root_dev_*()Mark McLoughlin
Replace s390_root_dev_register() with root_device_register() etc. [Includes fix from Cornelia Huck] Signed-off-by: Mark McLoughlin <markmc@redhat.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-05iucv: fix cpu hotplugHeiko Carstens
If the iucv module is compiled in/loaded but no user is registered cpu hot remove doesn't work. Reason for that is that the iucv cpu hotplug notifier on CPU_DOWN_PREPARE checks if the iucv_buffer_cpumask would be empty after the corresponding bit would be cleared. However the bit was never set since iucv wasn't enable. That causes all cpu hot unplug operations to fail in this scenario. To fix this use iucv_path_table as an indicator wether iucv is enabled or not. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-25[S390] convert iucv printks to dev_xxx and pr_xxx macros.Ursula Braun
Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] iucv: Locking free version of iucv_message_(receive|send)Hendrik Brueckner
Provide a locking free version of iucv_message_receive and iucv_message_send that do not call local_bh_enable in a spin_lock_(bh|irqsave)() context. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
2008-09-30iucv: Fix mismerge again.Heiko Carstens
fb65a7c091529bfffb1262515252c0d0f6241c5c ("iucv: Fix bad merging.") fixed a merge error, but in a wrong way. We now end up with the bug below. This patch corrects the mismerge like it was intended. BUG: scheduling while atomic: swapper/1/0x00000000 Modules linked in: CPU: 1 Not tainted 2.6.27-rc7-00094-gc0f4d6d #9 Process swapper (pid: 1, task: 000000003fe7d988, ksp: 000000003fe838c0) 0000000000000000 000000003fe839b8 0000000000000002 0000000000000000 000000003fe83a58 000000003fe839d0 000000003fe839d0 0000000000390de6 000000000058acd8 00000000000000d0 000000003fe7dcd8 0000000000000000 000000000000000c 000000000000000d 0000000000000000 000000003fe83a28 000000000039c5b8 0000000000015e5e 000000003fe839b8 000000003fe83a00 Call Trace: ([<0000000000015d6a>] show_trace+0xe6/0x134) [<0000000000039656>] __schedule_bug+0xa2/0xa8 [<0000000000391744>] schedule+0x49c/0x910 [<0000000000391f64>] schedule_timeout+0xc4/0x114 [<00000000003910d4>] wait_for_common+0xe8/0x1b4 [<00000000000549ae>] call_usermodehelper_exec+0xa6/0xec [<00000000001af7b8>] kobject_uevent_env+0x418/0x438 [<00000000001d08fc>] bus_add_driver+0x1e4/0x298 [<00000000001d1ee4>] driver_register+0x90/0x18c [<0000000000566848>] netiucv_init+0x168/0x2c8 [<00000000000120be>] do_one_initcall+0x3e/0x17c [<000000000054a31a>] kernel_init+0x1ce/0x248 [<000000000001a97a>] kernel_thread_starter+0x6/0xc [<000000000001a974>] kernel_thread_starter+0x0/0xc iucv: NETIUCV driver initialized initcall netiucv_init+0x0/0x2c8 returned with preemption imbalance Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-12 09:29:02 +0000