summaryrefslogtreecommitdiff
path: root/net/ipv6/addrconf.c
AgeCommit message (Collapse)Author
2018-06-11net/ipv6: Ensure cfg is properly initialized in ipv6_create_tempaddrDavid Ahern
Valdis reported a BUG in ipv6_add_addr: [ 1820.832682] BUG: unable to handle kernel NULL pointer dereference at 0000000000000209 [ 1820.832728] RIP: 0010:ipv6_add_addr+0x280/0xd10 [ 1820.832732] Code: 49 8b 1f 0f 84 6a 0a 00 00 48 85 db 0f 84 4e 0a 00 00 48 8b 03 48 8b 53 08 49 89 45 00 49 8b 47 10 49 89 55 08 48 85 c0 74 15 <48> 8b 50 08 48 8b 00 49 89 95 b8 01 00 00 49 89 85 b0 01 00 00 4c [ 1820.832847] RSP: 0018:ffffaa07c2fd7880 EFLAGS: 00010202 [ 1820.832853] RAX: 0000000000000201 RBX: ffffaa07c2fd79b0 RCX: 0000000000000000 [ 1820.832858] RDX: a4cfbfba2cbfa64c RSI: 0000000000000000 RDI: ffffffff8a8e9fa0 [ 1820.832862] RBP: ffffaa07c2fd7920 R08: 000000000000017a R09: ffffffff8a555300 [ 1820.832866] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888d18e71c00 [ 1820.832871] R13: ffff888d0a9b1200 R14: 0000000000000000 R15: ffffaa07c2fd7980 [ 1820.832876] FS: 00007faa51bdb800(0000) GS:ffff888d1d400000(0000) knlGS:0000000000000000 [ 1820.832880] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1820.832885] CR2: 0000000000000209 CR3: 000000021e8f8001 CR4: 00000000001606e0 [ 1820.832888] Call Trace: [ 1820.832898] ? __local_bh_enable_ip+0x119/0x260 [ 1820.832904] ? ipv6_create_tempaddr+0x259/0x5a0 [ 1820.832912] ? __local_bh_enable_ip+0x139/0x260 [ 1820.832921] ipv6_create_tempaddr+0x2da/0x5a0 [ 1820.832926] ? ipv6_create_tempaddr+0x2da/0x5a0 [ 1820.832941] manage_tempaddrs+0x1a5/0x240 [ 1820.832951] inet6_addr_del+0x20b/0x3b0 [ 1820.832959] ? nla_parse+0xce/0x1e0 [ 1820.832968] inet6_rtm_deladdr+0xd9/0x210 [ 1820.832981] rtnetlink_rcv_msg+0x1d4/0x5f0 Looking at the code I found 1 element (peer_pfx) of the newly introduced ifa6_config struct that is not initialized. Use a memset rather than hard coding an init for each struct element. Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Fixes: e6464b8c63619 ("net/ipv6: Convert ipv6_add_addr to struct ifa6_config") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-05net: ipv6: Generate random IID for addresses on RAWIP devicesSubash Abhinov Kasiviswanathan
RAWIP devices such as rmnet do not have a hardware address and instead require the kernel to generate a random IID for the IPv6 addresses. Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net/ipv6: Add support for specifying metric of connected routesDavid Ahern
Add support for IFA_RT_PRIORITY to ipv6 addresses. If the metric is changed on an existing address then the new route is inserted before removing the old one. Since the metric is one of the route keys, the prefix route can not be atomically replaced. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net/ipv6: Pass ifa6_config struct to inet6_addr_modifyDavid Ahern
Update inet6_addr_modify to take ifa6_config argument versus a parameter list. This is an argument move only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net/ipv6: Pass ifa6_config struct to inet6_addr_addDavid Ahern
Move the creation of struct ifa6_config up to callers of inet6_addr_add. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net/ipv6: Convert ipv6_add_addr to struct ifa6_configDavid Ahern
Move config parameters for adding an ipv6 address to a struct. struct names stem from inet6_rtm_newaddr which is the modern handler for adding an address. Start the conversion to ifa6_config with ipv6_add_addr. This is an argument move only; no functional change intended. Mapping of variable changes: addr --> cfg->pfx peer_addr --> cfg->peer_pfx pfxlen --> cfg->plen flags --> cfg->ifa_flags scope, valid_lft, prefered_lft have the same names within cfg (with corrected spelling). Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16proc: introduce proc_create_net{,_data}Christoph Hellwig
Variants of proc_create{,_data} that directly take a struct seq_operations and deal with network namespaces in ->open and ->release. All callers of proc_create + seq_open_net converted over, and seq_{open,release}_net are removed entirely. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-25ipv6: addrconf: don't evaluate keep_addr_on_down twiceIvan Vecera
The addrconf_ifdown() evaluates keep_addr_on_down state twice. There is no need to do it. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Fix gfp_flags arg to addrconf_prefix_routeDavid Ahern
Eric noticed that __ipv6_ifa_notify is called under rcu_read_lock, so the gfp argument to addrconf_prefix_route can not be GFP_KERNEL. While scrubbing other calls I noticed addrconf_addr_gen has one place with GFP_ATOMIC that can be GFP_KERNEL. Fixes: acb54e3cba404 ("net/ipv6: Add gfp_flags to route add functions") Reported-by: syzbot+2add39b05179b31f912f@syzkaller.appspotmail.com Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Remove aca_idevDavid Ahern
aca_idev has only 1 user - inet6_fill_ifacaddr - and it only wants the device index which can be extracted from the fib6_info nexthop. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Rename addrconf_dst_allocDavid Ahern
addrconf_dst_alloc now returns a fib6_info. Update the name and its users to reflect the change. Rename only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Rename fib6_info struct elementsDavid Ahern
Change the prefix for fib6_info struct elements from rt6i_ to fib6_. rt6i_pcpu and rt6i_exception_bucket are left as is given that they point to rt6_info entries. Rename only; not functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17net/ipv6: Flip FIB entries to fib6_infoDavid Ahern
Convert all code paths referencing a FIB entry from rt6_info to fib6_info. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17net/ipv6: separate handling of FIB entries from dst based routesDavid Ahern
Last step before flipping the data type for FIB entries: - use fib6_info_alloc to create FIB entries in ip6_route_info_create and addrconf_dst_alloc - use fib6_info_release in place of dst_release, ip6_rt_put and rt6_release - remove the dst_hold before calling __ip6_ins_rt or ip6_del_rt - when purging routes, drop per-cpu routes - replace inc and dec of rt6i_ref with fib6_info_hold and fib6_info_release - use rt->from since it points to the FIB entry - drop references to exception bucket, fib6_metrics and per-cpu from dst entries (those are relevant for fib entries only) Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17net/ipv6: Add gfp_flags to route add functionsDavid Ahern
Most FIB entries can be added using memory allocated with GFP_KERNEL. Add gfp_flags to ip6_route_add and addrconf_dst_alloc. Code paths that can be reached from the packet path (e.g., ndisc and autoconfig) or atomic notifiers use GFP_ATOMIC; paths from user context (adding addresses and routes) use GFP_KERNEL. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17net/ipv6: Move dst flags to booleans in fib entriesDavid Ahern
Continuing to wean FIB paths off of dst_entry, use a bool to hold requests for certain dst settings. Add a helper to convert the flags to DST flags when a FIB entry is converted to a dst_entry. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17net/ipv6: move expires into rt6_infoDavid Ahern
Add expires to rt6_info for FIB entries, and add fib6 helpers to manage it. Data path use of dst.expires remains. The transition is fairly straightforward: when working with fib entries, rt->dst.expires is just rt->expires, rt6_clean_expires is replaced with fib6_clean_expires, rt6_set_expires becomes fib6_set_expires, and rt6_check_expired becomes fib6_check_expired, where the fib6 versions are added by this patch. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17net/ipv6: Move nexthop data to fib6_nhDavid Ahern
Introduce fib6_nh structure and move nexthop related data from rt6_info and rt6_info.dst to fib6_nh. References to dev, gateway or lwtstate from a FIB lookup perspective are converted to use fib6_nh; datapath references to dst version are left as is. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17net/ipv6: Save route type in rt6_infoDavid Ahern
The RTN_ type for IPv6 FIB entries is currently embedded in rt6i_flags and dst.error. Since dst is going to be removed, it can no longer be relied on for FIB dumps so save the route type as fib6_type. fc_type is set in current users based on the algorithm in rt6_fill_node: - rt6i_flags contains RTF_LOCAL: fc_type = RTN_LOCAL - rt6i_flags contains RTF_ANYCAST: fc_type = RTN_ANYCAST - else fc_type = RTN_UNICAST Similarly, fib6_type is set in the rt6_info templates based on the RTF_REJECT section of rt6_fill_node converting dst.error to RTN type. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17net/ipv6: Pass net namespace to route functionsDavid Ahern
Pass network namespace reference into route add, delete and get functions. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17ipv6: send netlink notifications for manually configured addressesLorenzo Bianconi
Send a netlink notification when userspace adds a manually configured address if DAD is enabled and optimistic flag isn't set. Moreover send RTM_DELADDR notifications for tentative addresses. Some userspace applications (e.g. NetworkManager) are interested in addr netlink events albeit the address is still in tentative state, however events are not sent if DAD process is not completed. If the address is added and immediately removed userspace listeners are not notified. This behaviour can be easily reproduced by using veth interfaces: $ ip -b - <<EOF > link add dev vm1 type veth peer name vm2 > link set dev vm1 up > link set dev vm2 up > addr add 2001:db8:a:b:1:2:3:4/64 dev vm1 > addr del 2001:db8:a:b:1:2:3:4/64 dev vm1 EOF This patch reverts the behaviour introduced by the commit f784ad3d79e5 ("ipv6: do not send RTM_DELADDR for tentative addresses") Suggested-by: Thomas Haller <thaller@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16ipv6: remove unnecessary check in addrconf_prefix_rcv_add_addr()Lorenzo Bianconi
Remove unnecessary check on update_lft variable in addrconf_prefix_rcv_add_addr routine since it is always set to 0. Moreover remove update_lft re-initialization to 0 Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27net: Drop pernet_operations::asyncKirill Tkhai
Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27ipv6: addrconf: Use normal debugging styleJoe Perches
Remove local ADBG macro and use netdev_dbg/pr_debug Miscellanea: o Remove unnecessary debug message after allocation failure as there already is a dump_stack() on the failure paths o Leave the allocation failure message on snmp6_alloc_dev as there is one code path that does not do a dump_stack() Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26net: Use octal not symbolic permissionsJoe Perches
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16net/ipv6: Add l3mdev check to ipv6_chk_addr_and_flagsDavid Ahern
Lookup the L3 master device for the passed in device. Only consider addresses on netdev's with the same master device. If the device is not enslaved or is NULL, then the l3mdev is NULL which means only devices not enslaved (ie, in the default domain) are considered. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16net/ipv6: Change address check to always take a device argumentDavid Ahern
ipv6_chk_addr_and_flags determines if an address is a local address and optionally if it is an address on a specific device. For example, it is called by ip6_route_info_create to determine if a given gateway address is a local address. The address check currently does not consider L3 domains and as a result does not allow a route to be added in one VRF if the nexthop points to an address in a second VRF. e.g., $ ip route add 2001:db8:1::/64 vrf r2 via 2001:db8:102::23 Error: Invalid gateway address. where 2001:db8:102::23 is an address on an interface in vrf r1. ipv6_chk_addr_and_flags needs to allow callers to always pass in a device with a separate argument to not limit the address to the specific device. The device is used used to determine the L3 domain of interest. To that end add an argument to skip the device check and update callers to always pass a device where possible and use the new argument to mean any address in the domain. Update a handful of users of ipv6_chk_addr with a NULL dev argument. This patch handles the change to these callers without adding the domain check. ip6_validate_gw needs to handle 2 cases - one where the device is given as part of the nexthop spec and the other where the device is resolved. There is at least 1 VRF case where deferring the check to only after the route lookup has resolved the device fails with an unintuitive error "RTNETLINK answers: No route to host" as opposed to the preferred "Error: Gateway can not be a local address." The 'no route to host' error is because of the fallback to a full lookup. The check is done twice to avoid this error. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01ipv6: allow userspace to add IFA_F_OPTIMISTIC addressesSabrina Dubroca
According to RFC 4429 (section 3.1), adding new IPv6 addresses as optimistic addresses is acceptable, as long as the implementation follows some rules: * Optimistic DAD SHOULD only be used when the implementation is aware that the address is based on a most likely unique interface identifier (such as in [RFC2464]), generated randomly [RFC3041], or by a well-distributed hash function [RFC3972] or assigned by Dynamic Host Configuration Protocol for IPv6 (DHCPv6) [RFC3315]. Optimistic DAD SHOULD NOT be used for manually entered addresses. Thus, it seems reasonable to allow userspace to set the optimistic flag when adding new addresses. We must not let userspace set NODAD + OPTIMISTIC, since if the kernel is not performing DAD we would never clear the optimistic flag. We must also ignore userspace's request to add OPTIMISTIC flag to addresses that have already completed DAD (addresses that don't have the TENTATIVE flag, or that have the DADFAILED flag). Then we also need to clear the OPTIMISTIC flag on permanent addresses when DAD fails. Otherwise, IFA_F_OPTIMISTIC addresses added by userspace can still be used after DAD has failed, because in ipv6_chk_addr_and_flags(), IFA_F_OPTIMISTIC overrides IFA_F_TENTATIVE. Setting IFA_F_OPTIMISTIC from userspace is conditional on CONFIG_IPV6_OPTIMISTIC_DAD and the optimistic_dad sysctl. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19net: Convert raw6_net_ops, udplite6_net_ops, ipv6_proc_ops, if6_proc_net_ops ↵Kirill Tkhai
and ip6_route_net_late_ops These pernet_operations create and destroy /proc entries and safely may be converted and safely may be mark as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-13net: Convert addrconf_opsKirill Tkhai
These pernet_operations (un)register sysctl, which are not touched by anybody else. So, it's safe to make them async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29ipv6: addrconf: break critical section in addrconf_verify_rtnl()Eric Dumazet
Heiner reported a lockdep splat [1] This is caused by attempting GFP_KERNEL allocation while RCU lock is held and BH blocked. We believe that addrconf_verify_rtnl() could run for a long period, so instead of using GFP_ATOMIC here as Ido suggested, we should break the critical section and restart it after the allocation. [1] [86220.125562] ============================= [86220.125586] WARNING: suspicious RCU usage [86220.125612] 4.15.0-rc7-next-20180110+ #7 Not tainted [86220.125641] ----------------------------- [86220.125666] kernel/sched/core.c:6026 Illegal context switch in RCU-bh read-side critical section! [86220.125711] other info that might help us debug this: [86220.125755] rcu_scheduler_active = 2, debug_locks = 1 [86220.125792] 4 locks held by kworker/0:2/1003: [86220.125817] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000da8e9b73>] process_one_work+0x1de/0x680 [86220.125895] #1: ((addr_chk_work).work){+.+.}, at: [<00000000da8e9b73>] process_one_work+0x1de/0x680 [86220.125959] #2: (rtnl_mutex){+.+.}, at: [<00000000b06d9510>] rtnl_lock+0x12/0x20 [86220.126017] #3: (rcu_read_lock_bh){....}, at: [<00000000aef52299>] addrconf_verify_rtnl+0x1e/0x510 [ipv6] [86220.126111] stack backtrace: [86220.126142] CPU: 0 PID: 1003 Comm: kworker/0:2 Not tainted 4.15.0-rc7-next-20180110+ #7 [86220.126185] Hardware name: ZOTAC ZBOX-CI321NANO/ZBOX-CI321NANO, BIOS B246P105 06/01/2015 [86220.126250] Workqueue: ipv6_addrconf addrconf_verify_work [ipv6] [86220.126288] Call Trace: [86220.126312] dump_stack+0x70/0x9e [86220.126337] lockdep_rcu_suspicious+0xce/0xf0 [86220.126365] ___might_sleep+0x1d3/0x240 [86220.126390] __might_sleep+0x45/0x80 [86220.126416] kmem_cache_alloc_trace+0x53/0x250 [86220.126458] ? ipv6_add_addr+0xfe/0x6e0 [ipv6] [86220.126498] ipv6_add_addr+0xfe/0x6e0 [ipv6] [86220.126538] ipv6_create_tempaddr+0x24d/0x430 [ipv6] [86220.126580] ? ipv6_create_tempaddr+0x24d/0x430 [ipv6] [86220.126623] addrconf_verify_rtnl+0x339/0x510 [ipv6] [86220.126664] ? addrconf_verify_rtnl+0x339/0x510 [ipv6] [86220.126708] addrconf_verify_work+0xe/0x20 [ipv6] [86220.126738] process_one_work+0x258/0x680 [86220.126765] worker_thread+0x35/0x3f0 [86220.126790] kthread+0x124/0x140 [86220.126813] ? process_one_work+0x680/0x680 [86220.126839] ? kthread_create_worker_on_cpu+0x40/0x40 [86220.126869] ? umh_complete+0x40/0x40 [86220.126893] ? call_usermodehelper_exec_async+0x12a/0x160 [86220.126926] ret_from_fork+0x4b/0x60 [86220.126999] BUG: sleeping function called from invalid context at mm/slab.h:420 [86220.127041] in_atomic(): 1, irqs_disabled(): 0, pid: 1003, name: kworker/0:2 [86220.127082] 4 locks held by kworker/0:2/1003: [86220.127107] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000da8e9b73>] process_one_work+0x1de/0x680 [86220.127179] #1: ((addr_chk_work).work){+.+.}, at: [<00000000da8e9b73>] process_one_work+0x1de/0x680 [86220.127242] #2: (rtnl_mutex){+.+.}, at: [<00000000b06d9510>] rtnl_lock+0x12/0x20 [86220.127300] #3: (rcu_read_lock_bh){....}, at: [<00000000aef52299>] addrconf_verify_rtnl+0x1e/0x510 [ipv6] [86220.127414] CPU: 0 PID: 1003 Comm: kworker/0:2 Not tainted 4.15.0-rc7-next-20180110+ #7 [86220.127463] Hardware name: ZOTAC ZBOX-CI321NANO/ZBOX-CI321NANO, BIOS B246P105 06/01/2015 [86220.127528] Workqueue: ipv6_addrconf addrconf_verify_work [ipv6] [86220.127568] Call Trace: [86220.127591] dump_stack+0x70/0x9e [86220.127616] ___might_sleep+0x14d/0x240 [86220.127644] __might_sleep+0x45/0x80 [86220.127672] kmem_cache_alloc_trace+0x53/0x250 [86220.127717] ? ipv6_add_addr+0xfe/0x6e0 [ipv6] [86220.127762] ipv6_add_addr+0xfe/0x6e0 [ipv6] [86220.127807] ipv6_create_tempaddr+0x24d/0x430 [ipv6] [86220.127854] ? ipv6_create_tempaddr+0x24d/0x430 [ipv6] [86220.127903] addrconf_verify_rtnl+0x339/0x510 [ipv6] [86220.127950] ? addrconf_verify_rtnl+0x339/0x510 [ipv6] [86220.127998] addrconf_verify_work+0xe/0x20 [ipv6] [86220.128032] process_one_work+0x258/0x680 [86220.128063] worker_thread+0x35/0x3f0 [86220.128091] kthread+0x124/0x140 [86220.128117] ? process_one_work+0x680/0x680 [86220.128146] ? kthread_create_worker_on_cpu+0x40/0x40 [86220.128180] ? umh_complete+0x40/0x40 [86220.128207] ? call_usermodehelper_exec_async+0x12a/0x160 [86220.128243] ret_from_fork+0x4b/0x60 Fixes: f3d9832e56c4 ("ipv6: addrconf: cleanup locking in ipv6_add_addr") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29net: ipv6: send unsolicited NA after DADDavid Ahern
Unsolicited IPv6 neighbor advertisements should be sent after DAD completes. Update ndisc_send_unsol_na to skip tentative, non-optimistic addresses and have those sent by addrconf_dad_completed after DAD. Fixes: 4a6e3c5def13c ("net: ipv6: send unsolicited NA on admin up") Reported-by: Vivek Venkatraman <vivek@cumulusnetworks.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: delete /proc THIS_MODULE referencesAlexey Dobriyan
/proc has been ignoring struct file_operations::owner field for 10 years. Specifically, it started with commit 786d7e1612f0b0adb6046f19b906609e4fe8b1ba ("Fix rmmod/read/write races in /proc entries"). Notice the chunk where inode->i_fop is initialized with proxy struct file_operations for regular files: - if (de->proc_fops) - inode->i_fop = de->proc_fops; + if (de->proc_fops) { + if (S_ISREG(inode->i_mode)) + inode->i_fop = &proc_reg_file_ops; + else + inode->i_fop = de->proc_fops; + } VFS stopped pinning module at this point. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-07ipv6: Set nexthop flags upon carrier changeIdo Schimmel
Similar to IPv4, when the carrier of a netdev changes we should toggle the 'linkdown' flag on all the nexthops using it as their nexthop device. This will later allow us to test for the presence of this flag during route lookup and dump. Up until commit 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address") host and anycast routes used the loopback netdev as their nexthop device and thus were not marked with the 'linkdown' flag. The patch preserves this behavior and allows one to ping the local address even when the nexthop device does not have a carrier and the 'ignore_routes_with_linkdown' sysctl is set. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-07ipv6: Prepare to handle multiple netdev eventsIdo Schimmel
To make IPv6 more in line with IPv4 we need to be able to respond differently to different netdev events. For example, when a netdev is unregistered all the routes using it as their nexthop device should be flushed, whereas when the netdev's carrier changes only the 'linkdown' flag should be toggled. Currently, this is not possible, as the function that traverses the routing tables is not aware of the triggering event. Propagate the triggering event down, so that it could be used in later patches. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-07ipv6: Clear nexthop flags upon netdev upIdo Schimmel
Previous patch marked nexthops with the 'dead' and 'linkdown' flags. Clear these flags when the netdev comes back up. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-04rtnetlink: ipv6: convert remaining users to rtnl_register_moduleFlorian Westphal
convert remaining users of rtnl_register to rtnl_register_module and un-export rtnl_register. Requested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-04rtnetlink: remove __rtnl_registerFlorian Westphal
This removes __rtnl_register and switches callers to either rtnl_register or rtnl_register_module. Also, rtnl_register() will now print an error if memory allocation failed rather than panic the kernel. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-15ipv6: set all.accept_dad to 0 by defaultNicolas Dichtel
With commits 35e015e1f577 and a2d3f3e33853, the global 'accept_dad' flag is also taken into account (default value is 1). If either global or per-interface flag is non-zero, DAD will be enabled on a given interface. This is not backward compatible: before those patches, the user could disable DAD just by setting the per-interface flag to 0. Now, the user instead needs to set both flags to 0 to actually disable DAD. Restore the previous behaviour by setting the default for the global 'accept_dad' flag to 0. This way, DAD is still enabled by default, as per-interface flags are set to 1 on device creation, but setting them to 0 is enough to disable DAD on a given interface. - Before 35e015e1f57a7 and a2d3f3e33853: global per-interface DAD enabled [default] 1 1 yes X 0 no X 1 yes - After 35e015e1f577 and a2d3f3e33853: global per-interface DAD enabled [default] 1 1 yes 0 0 no 0 1 yes 1 0 yes - After this fix: global per-interface DAD enabled 1 1 yes 0 0 no [default] 0 1 yes 1 0 yes Fixes: 35e015e1f577 ("ipv6: fix net.ipv6.conf.all interface DAD handlers") Fixes: a2d3f3e33853 ("ipv6: fix net.ipv6.conf.all.accept_dad behaviour for real") CC: Stefano Brivio <sbrivio@redhat.com> CC: Matteo Croce <mcroce@redhat.com> CC: Erik Kline <ek@google.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: ipv6: sysctl to specify IPv6 ND traffic classMaciej Żenczykowski
Add a per-device sysctl to specify the default traffic class to use for kernel originated IPv6 Neighbour Discovery packets. Currently this includes: - Router Solicitation (ICMPv6 type 133) ndisc_send_rs() -> ndisc_send_skb() -> ip6_nd_hdr() - Neighbour Solicitation (ICMPv6 type 135) ndisc_send_ns() -> ndisc_send_skb() -> ip6_nd_hdr() - Neighbour Advertisement (ICMPv6 type 136) ndisc_send_na() -> ndisc_send_skb() -> ip6_nd_hdr() - Redirect (ICMPv6 type 137) ndisc_send_redirect() -> ndisc_send_skb() -> ip6_nd_hdr() and if the kernel ever gets around to generating RA's, it would presumably also include: - Router Advertisement (ICMPv6 type 134) (radvd daemon could pick up on the kernel setting and use it) Interface drivers may examine the Traffic Class value and translate the DiffServ Code Point into a link-layer appropriate traffic prioritization scheme. An example of mapping IETF DSCP values to IEEE 802.11 User Priority values can be found here: https://tools.ietf.org/html/draft-ietf-tsvwg-ieee-802-11 The expected primary use case is to properly prioritize ND over wifi. Testing: jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass 0 jzem22:~# echo -1 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass -bash: echo: write error: Invalid argument jzem22:~# echo 256 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass -bash: echo: write error: Invalid argument jzem22:~# echo 0 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# echo 255 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass 255 jzem22:~# echo 34 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass 34 jzem22:~# echo $[0xDC] > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# tcpdump -v -i eth0 icmp6 and src host jzem22.pgc and dst host fe80::1 tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes IP6 (class 0xdc, hlim 255, next-header ICMPv6 (58) payload length: 24) jzem22.pgc > fe80::1: [icmp6 sum ok] ICMP6, neighbor advertisement, length 24, tgt is jzem22.pgc, Flags [solicited] (based on original change written by Erik Kline, with minor changes) v2: fix 'suspicious rcu_dereference_check() usage' by explicitly grabbing the rcu_read_lock. Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Erik Kline <ek@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-07ipv6: addrconf: fix a lockdep splatEric Dumazet
Fixes a case where GFP_ATOMIC allocation must be used instead of GFP_KERNEL one. [ 54.891146] lock_acquire+0xb3/0x2f0 [ 54.891153] ? fs_reclaim_acquire.part.60+0x5/0x30 [ 54.891165] fs_reclaim_acquire.part.60+0x29/0x30 [ 54.891170] ? fs_reclaim_acquire.part.60+0x5/0x30 [ 54.891178] kmem_cache_alloc_trace+0x3f/0x500 [ 54.891186] ? cyc2ns_read_end+0x1e/0x30 [ 54.891196] ipv6_add_addr+0x15a/0xc30 [ 54.891217] ? ipv6_create_tempaddr+0x2ea/0x5d0 [ 54.891223] ipv6_create_tempaddr+0x2ea/0x5d0 [ 54.891238] ? manage_tempaddrs+0x195/0x220 [ 54.891249] ? addrconf_prefix_rcv_add_addr+0x1c0/0x4f0 [ 54.891255] addrconf_prefix_rcv_add_addr+0x1c0/0x4f0 [ 54.891268] addrconf_prefix_rcv+0x2e5/0x9b0 [ 54.891279] ? neigh_update+0x446/0xb90 [ 54.891298] ? ndisc_router_discovery+0x5ab/0xf00 [ 54.891303] ndisc_router_discovery+0x5ab/0xf00 [ 54.891311] ? retint_kernel+0x2d/0x2d [ 54.891331] ndisc_rcv+0x1b6/0x270 [ 54.891340] icmpv6_rcv+0x6aa/0x9f0 [ 54.891345] ? ipv6_chk_mcast_addr+0x176/0x530 [ 54.891351] ? do_csum+0x17b/0x260 [ 54.891360] ip6_input_finish+0x194/0xb20 [ 54.891372] ip6_input+0x5b/0x2c0 [ 54.891380] ? ip6_rcv_finish+0x320/0x320 [ 54.891389] ip6_mc_input+0x15a/0x250 [ 54.891396] ipv6_rcv+0x772/0x1050 [ 54.891403] ? consume_skb+0xbe/0x2d0 [ 54.891412] ? ip6_make_skb+0x2a0/0x2a0 [ 54.891418] ? ip6_input+0x2c0/0x2c0 [ 54.891425] __netif_receive_skb_core+0xa0f/0x1600 [ 54.891436] ? process_backlog+0xac/0x400 [ 54.891441] process_backlog+0xfa/0x400 [ 54.891448] ? net_rx_action+0x145/0x1130 [ 54.891456] net_rx_action+0x310/0x1130 [ 54.891524] ? RTUSBBulkReceive+0x11d/0x190 [mt7610u_sta] [ 54.891538] __do_softirq+0x140/0xaba [ 54.891553] irq_exit+0x10b/0x160 [ 54.891561] do_IRQ+0xbb/0x1b0 Fixes: f3d9832e56c4 ("ipv6: addrconf: cleanup locking in ipv6_add_addr") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Acked-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-05ipv6: remove IN6_ADDR_HSIZE from addrconf.hEric Dumazet
IN6_ADDR_HSIZE is private to addrconf.c, move it here to avoid confusion. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Smooth Cong Wang's bug fix into 'net-next'. Basically put the bulk of the tcf_block_put() logic from 'net' into tcf_block_put_ext(), but after the offload unbind. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01ipv6: addrconf: increment ifp refcount before ipv6_del_addr()Eric Dumazet
In the (unlikely) event fixup_permanent_addr() returns a failure, addrconf_permanent_addr() calls ipv6_del_addr() without the mandatory call to in6_ifa_hold(), leading to a refcount error, spotted by syzkaller : WARNING: CPU: 1 PID: 3142 at lib/refcount.c:227 refcount_dec+0x4c/0x50 lib/refcount.c:227 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 3142 Comm: ip Not tainted 4.14.0-rc4-next-20171009+ #33 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:181 __warn+0x1c4/0x1e0 kernel/panic.c:544 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:178 do_trap_no_signal arch/x86/kernel/traps.c:212 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:261 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:298 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:311 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:refcount_dec+0x4c/0x50 lib/refcount.c:227 RSP: 0018:ffff8801ca49e680 EFLAGS: 00010286 RAX: 000000000000002c RBX: ffff8801d07cfcdc RCX: 0000000000000000 RDX: 000000000000002c RSI: 1ffff10039493c90 RDI: ffffed0039493cc4 RBP: ffff8801ca49e688 R08: ffff8801ca49dd70 R09: 0000000000000000 R10: ffff8801ca49df58 R11: 0000000000000000 R12: 1ffff10039493cd9 R13: ffff8801ca49e6e8 R14: ffff8801ca49e7e8 R15: ffff8801d07cfcdc __in6_ifa_put include/net/addrconf.h:369 [inline] ipv6_del_addr+0x42b/0xb60 net/ipv6/addrconf.c:1208 addrconf_permanent_addr net/ipv6/addrconf.c:3327 [inline] addrconf_notify+0x1c66/0x2190 net/ipv6/addrconf.c:3393 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x32/0x60 net/core/dev.c:1697 call_netdevice_notifiers net/core/dev.c:1715 [inline] __dev_notify_flags+0x15d/0x430 net/core/dev.c:6843 dev_change_flags+0xf5/0x140 net/core/dev.c:6879 do_setlink+0xa1b/0x38e0 net/core/rtnetlink.c:2113 rtnl_newlink+0xf0d/0x1a40 net/core/rtnetlink.c:2661 rtnetlink_rcv_msg+0x733/0x1090 net/core/rtnetlink.c:4301 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2408 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4313 netlink_unicast_kernel net/netlink/af_netlink.c:1273 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1299 netlink_sendmsg+0xa4a/0xe70 net/netlink/af_netlink.c:1862 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x75b/0x8a0 net/socket.c:2049 __sys_sendmsg+0xe5/0x210 net/socket.c:2083 SYSC_sendmsg net/socket.c:2094 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2090 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7fa9174d3320 RSP: 002b:00007ffe302ae9e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffe302b2ae0 RCX: 00007fa9174d3320 RDX: 0000000000000000 RSI: 00007ffe302aea20 RDI: 0000000000000016 RBP: 0000000000000082 R08: 0000000000000000 R09: 000000000000000f R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe302b32a0 R13: 0000000000000000 R14: 00007ffe302b2ab8 R15: 00007ffe302b32b8 Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Ahern <dsahern@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: display hw address of source machine during ipv6 DAD failureVishwanath Pai
This patch updates the error messages displayed in kernel log to include hwaddress of the source machine that caused ipv6 duplicate address detection failures. Examples: a) When we receive a NA packet from another machine advertising our address: ICMPv6: NA: 34:ab:cd:56:11:e8 advertised our address 2001:db8:: on eth0! b) When we detect DAD failure during address assignment to an interface: IPv6: eth0: IPv6 duplicate address 2001:db8:: used by 34:ab:cd:56:11:e8 detected! v2: Changed %pI6 to %pI6c in ndisc_recv_na() Chaged the v6 address in the commit message to 2001:db8:: Suggested-by: Igor Lubashev <ilubashe@akamai.com> Signed-off-by: Vishwanath Pai <vpai@akamai.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-24ipv6: addrconf: do not block BH in ipv6_chk_home_addr()Eric Dumazet
rcu_read_lock() is enough here, no need to block BH. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-24ipv6: addrconf: do not block BH in /proc/net/if_inet6 handlingEric Dumazet
Table is really RCU protected, no need to block BH Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-24ipv6: addrconf: do not block BH in ipv6_get_ifaddr()Eric Dumazet
rcu_read_lock() is enough here, no need to block BH. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-24 01:54:43 +0000