summaryrefslogtreecommitdiff
path: root/net/ipv4/ip_gre.c
AgeCommit message (Collapse)Author
2013-03-16Revert "ip_gre: make ipgre_tunnel_xmit() not parse network header as IP ↵Timo Teräs
unconditionally" This reverts commit 412ed94744d16806fbec3bd250fd94e71cde5a1f. The commit is wrong as tiph points to the outer IPv4 header which is installed at ipgre_header() and not the inner one which is protocol dependant. This commit broke succesfully opennhrp which use PF_PACKET socket with ETH_P_NHRP protocol. Additionally ssl_addr is set to the link-layer IPv4 address. This address is written by ipgre_header() to the skb earlier, and this is the IPv4 header tiph should point to - regardless of the inner protocol payload. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25Revert "ip_gre: propogate target device GSO capability to the tunnel device"Pravin B Shelar
This reverts commit eb6b9a8cad65e820b145547844b108117cece3a0. Above commit limits GSO capability of gre device to just TSO, but software GRE-GSO is capable of handling all GSO capabilities. This patch also fixes following panic which reverted commit introduced:- BUG: unable to handle kernel NULL pointer dereference at 00000000000000a2 IP: [<ffffffffa0680fd1>] ipgre_tunnel_bind_dev+0x161/0x1f0 [ip_gre] PGD 42bc19067 PUD 42bca9067 PMD 0 Oops: 0000 [#1] SMP Pid: 2636, comm: ip Tainted: GF 3.8.0+ #83 Dell Inc. PowerEdge R620/0KCKR5 RIP: 0010:[<ffffffffa0680fd1>] [<ffffffffa0680fd1>] ipgre_tunnel_bind_dev+0x161/0x1f0 [ip_gre] RSP: 0018:ffff88042bfcb708 EFLAGS: 00010246 RAX: 00000000000005b6 RBX: ffff88042d2fa000 RCX: 0000000000000044 RDX: 0000000000000018 RSI: 0000000000000078 RDI: 0000000000000060 RBP: ffff88042bfcb748 R08: 0000000000000018 R09: 000000000000000c R10: 0000000000000020 R11: 000000000101010a R12: ffff88042d2fa800 R13: 0000000000000000 R14: ffff88042d2fa800 R15: ffff88042cd7f650 FS: 00007fa784f55700(0000) GS:ffff88043fd20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a2 CR3: 000000042d8b9000 CR4: 00000000000407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ip (pid: 2636, threadinfo ffff88042bfca000, task ffff88042d142a80) Stack: 0000000100000000 002f000000000000 0a01010100000000 000000000b010101 ffff88042d2fa800 ffff88042d2fa000 ffff88042bfcb858 ffff88042f418c00 ffff88042bfcb798 ffffffffa068199a ffff88042bfcb798 ffff88042d2fa830 Call Trace: [<ffffffffa068199a>] ipgre_newlink+0xca/0x160 [ip_gre] [<ffffffff8143b692>] rtnl_newlink+0x532/0x5f0 [<ffffffff8143b2fc>] ? rtnl_newlink+0x19c/0x5f0 [<ffffffff81438978>] rtnetlink_rcv_msg+0x2c8/0x340 [<ffffffff814386b0>] ? rtnetlink_rcv+0x40/0x40 [<ffffffff814560f9>] netlink_rcv_skb+0xa9/0xd0 [<ffffffff81438695>] rtnetlink_rcv+0x25/0x40 [<ffffffff81455ddc>] netlink_unicast+0x1ac/0x230 [<ffffffff81456a45>] netlink_sendmsg+0x265/0x380 [<ffffffff814138c0>] sock_sendmsg+0xb0/0xe0 [<ffffffff8141141e>] ? move_addr_to_kernel+0x4e/0x90 [<ffffffff81420445>] ? verify_iovec+0x85/0xf0 [<ffffffff81414ffd>] __sys_sendmsg+0x3fd/0x420 [<ffffffff8114b701>] ? handle_mm_fault+0x251/0x3b0 [<ffffffff8114f39f>] ? vma_link+0xcf/0xe0 [<ffffffff81415239>] sys_sendmsg+0x49/0x90 [<ffffffff814ffd19>] system_call_fastpath+0x16/0x1b CC: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25IP_GRE: Fix GRE_CSUM case.Pravin B Shelar
commit "ip_gre: allow CSUM capable devices to handle packets" aa0e51cdda005cd37e2, broke GRE_CSUM case. GRE_CSUM needs checksum computed for inner packet. Therefore csum-calculation can not be offloaded if tunnel device requires GRE_CSUM. Following patch fixes it by computing inner packet checksum for GRE_CSUM type, for all other type of GRE devices csum is offloaded. CC: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25IP_GRE: Fix IP-Identification.Pravin B Shelar
GRE-GSO generates ip fragments with id 0,2,3,4... for every GSO packet, which is not correct. Following patch fixes it by setting ip-header id unique id of fragments are allowed. As Eric Dumazet suggested it is optimized by using inner ip-header whenever inner packet is ipv4. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-19ip_gre: remove an extra dst_release()Eric Dumazet
commit 68c331631143 (v4 GRE: Add TCP segmentation offload for GRE) introduced a bug in error path. dst is attached to skb, so will be released when skb is freed. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pravin B Shelar <pshelar@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-19ip_gre: propogate target device GSO capability to the tunnel deviceDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-19ip_gre: allow CSUM capable devices to handle packetsDmitry Kravkov
If device is not able to handle checksumming it will be handled in dev_xmit Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-15v4 GRE: Add TCP segmentation offload for GREPravin B Shelar
Following patch adds GRE protocol offload handler so that skb_gso_segment() can segment GRE packets. SKB GSO CB is added to keep track of total header length so that skb_segment can push entire header. e.g. in case of GRE, skb_segment need to push inner and outer headers to every segment. New NETIF_F_GRE_GSO feature is added for devices which support HW GRE TSO offload. Currently none of devices support it therefore GRE GSO always fall backs to software GSO. [ Compute pkt_len before ip_local_out() invocation. -DaveM ] Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Bring in the 'net' tree so that we can get some ipv4/ipv6 bug fixes that some net-next work will build upon. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29ip_gre: When TOS is inherited, use configured TOS value for non-IP packetsDavid Ward
A GRE tunnel can be configured so that outgoing tunnel packets inherit the value of the TOS field from the inner IP header. In doing so, when a non-IP packet is transmitted through the tunnel, the TOS field will always be set to 0. Instead, the user should be able to configure a different TOS value as the fallback to use for non-IP packets. This is helpful when the non-IP packets are all control packets and should be handled by routers outside the tunnel as having Internet Control precedence. One example of this is the NHRP packets that control a DMVPN-compatible mGRE tunnel; they are encapsulated directly by GRE and do not contain an inner IP header. Under the existing behavior, the IFLA_GRE_TOS parameter must be set to '1' for the TOS value to be inherited. Now, only the least significant bit of this parameter must be set to '1', and when a non-IP packet is sent through the tunnel, the upper 6 bits of this same parameter will be copied into the TOS field. (The ECN bits get masked off as before.) This behavior is backwards-compatible with existing configurations and iproute2 versions. Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28net: fix possible wrong checksum generationEric Dumazet
Pravin Shelar mentioned that GSO could potentially generate wrong TX checksum if skb has fragments that are overwritten by the user between the checksum computation and transmit. He suggested to linearize skbs but this extra copy can be avoided for normal tcp skbs cooked by tcp_sendmsg(). This patch introduces a new SKB_GSO_SHARED_FRAG flag, set in skb_shinfo(skb)->gso_type if at least one frag can be modified by the user. Typical sources of such possible overwrites are {vm}splice(), sendfile(), and macvtap/tun/virtio_net drivers. Tested: $ netperf -H 7.7.8.84 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.8.84 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 3959.52 $ netperf -H 7.7.8.84 -t TCP_SENDFILE TCP SENDFILE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.8.84 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 3216.80 Performance of the SENDFILE is impacted by the extra allocation and copy, and because we use order-0 pages, while the TCP_STREAM uses bigger pages. Reported-by: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28IP_GRE: Fix kernel panic in IP_GRE with GRE csum.Pravin B Shelar
Due to IP_GRE GSO support, GRE can recieve non linear skb which results in panic in case of GRE_CSUM. Following patch fixes it by using correct csum API. Bug introduced in commit 6b78f16e4bdde3936b (gre: add GSO support) Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-26ipv4/ip_gre: set transport header correctly to gre headerIsaku Yamahata
ipgre_tunnel_xmit() incorrectly sets transport header to inner payload instead of GRE header. It seems copy-and-pasted from ipip.c. So set transport header to gre header. (In ipip case the transport header is the inner ip header, so that's correct.) Found by inspection. In practice the incorrect transport header doesn't matter because the skb usually is sent to another net_device or socket, so the transport header isn't referenced. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-21ip_gre: fix possible use after freeEric Dumazet
Once skb_realloc_headroom() is called, tiph might point to freed memory. Cache tiph->ttl value before the reallocation, to avoid unexpected behavior. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-21ip_gre: make ipgre_tunnel_xmit() not parse network header as IP unconditionallyIsaku Yamahata
ipgre_tunnel_xmit() parses network header as IP unconditionally. But transmitting packets are not always IP packet. For example such packet can be sent by packet socket with sockaddr_ll.sll_protocol set. So make the function check if skb->protocol is IP. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-18net: Allow userns root to control ipv4Eric W. Biederman
Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Settings that merely control a single network device are allowed. Either the network device is a logical network device where restrictions make no difference or the network device is hardware NIC that has been explicity moved from the initial network namespace. In general policy and network stack state changes are allowed while resource control is left unchanged. Allow creating raw sockets. Allow the SIOCSARP ioctl to control the arp cache. Allow the SIOCSIFFLAG ioctl to allow setting network device flags. Allow the SIOCSIFADDR ioctl to allow setting a netdevice ipv4 address. Allow the SIOCSIFBRDADDR ioctl to allow setting a netdevice ipv4 broadcast address. Allow the SIOCSIFDSTADDR ioctl to allow setting a netdevice ipv4 destination address. Allow the SIOCSIFNETMASK ioctl to allow setting a netdevice ipv4 netmask. Allow the SIOCADDRT and SIOCDELRT ioctls to allow adding and deleting ipv4 routes. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for adding, changing and deleting gre tunnels. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for adding, changing and deleting ipip tunnels. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for adding, changing and deleting ipsec virtual tunnel interfaces. Allow setting the MRT_INIT, MRT_DONE, MRT_ADD_VIF, MRT_DEL_VIF, MRT_ADD_MFC, MRT_DEL_MFC, MRT_ASSERT, MRT_PIM, MRT_TABLE socket options on multicast routing sockets. Allow setting and receiving IPOPT_CIPSO, IP_OPT_SEC, IP_OPT_SID and arbitrary ip options. Allow setting IP_SEC_POLICY/IP_XFRM_POLICY ipv4 socket option. Allow setting the IP_TRANSPARENT ipv4 socket option. Allow setting the TCP_REPAIR socket option. Allow setting the TCP_CONGESTION socket option. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14net: unify for_each_ip_tunnel_rcu()Amerigo Wang
The defitions of for_each_ip_tunnel_rcu() are same, so unify it. Also, don't hide the parameter 't'. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14net: convert __IPTUNNEL_XMIT() to an inline functionAmerigo Wang
__IPTUNNEL_XMIT() is an ugly macro, convert it to a static inline function, so make it more readable. IPTUNNEL_XMIT() is unused, just remove it. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01gre: fix sparse warningstephen hemminger
Use be16 consistently when looking at flags. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01ipv4: gre: add GRO capabilityEric Dumazet
Add GRO capability to IPv4 GRE tunnels, using the gro_cells infrastructure. Tested using IPv4 and IPv6 TCP traffic inside this tunnel, and checking GRO is building large packets. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27tunnel: drop packet if ECN present with not-ECTstephen hemminger
Linux tunnels were written before RFC6040 and therefore never implemented the corner case of ECN getting set in the outer header and the inner header not being ready for it. Section 4.2. Default Tunnel Egress Behaviour. o If the inner ECN field is Not-ECT, the decapsulator MUST NOT propagate any other ECN codepoint onwards. This is because the inner Not-ECT marking is set by transports that rely on dropped packets as an indication of congestion and would not understand or respond to any other ECN codepoint [RFC4774]. Specifically: * If the inner ECN field is Not-ECT and the outer ECN field is CE, the decapsulator MUST drop the packet. * If the inner ECN field is Not-ECT and the outer ECN field is Not-ECT, ECT(0), or ECT(1), the decapsulator MUST forward the outgoing packet with the ECN field cleared to Not-ECT. This patch moves the ECN decap logic out of the individual tunnels into a common place. It also adds logging to allow detecting broken systems that set ECN bits incorrectly when tunneling (or an intermediate router might be changing the header). Overloads rx_frame_error to keep track of ECN related error. Thanks to Chris Wright who caught this while reviewing the new VXLAN tunnel. This code was tested by injecting faulty logic in other end GRE to send incorrectly encapsulated packets. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27gre: remove unnecessary rcu_read_lock/unlockstephen hemminger
The gre function pointers for receive and error handling are always called (from gre.c) with rcu_read_lock already held. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27gre: fix handling of key 0stephen hemminger
GRE driver incorrectly uses zero as a flag value. Zero is a perfectly valid value for key, and the tunnel should match packets with no key only with tunnels created without key, and vice versa. This is a slightly visible change since previously it might be possible to construct a working tunnel that sent key 0 and received only because of the key wildcard of zero. I.e the sender sent key of zero, but tunnel was defined without key. Note: using gre key 0 requires iproute2 utilities v3.2 or later. The original utility code was broken as well. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19gre: add GSO supportEric Dumazet
Add GSO support to GRE tunnels. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20ipv4: Adjust semantics of rt->rt_gateway.David S. Miller
In order to allow prefixed routes, we have to adjust how rt_gateway is set and interpreted. The new interpretation is: 1) rt_gateway == 0, destination is on-link, nexthop is iph->daddr 2) rt_gateway != 0, destination requires a nexthop gateway Abstract the fetching of the proper nexthop value using a new inline helper, rt_nexthop(), as suggested by Joe Perches. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Vijay Subramanian <subramanian.vijay@gmail.com>
2012-07-17net: Pass optional SKB and SK arguments to dst_ops->{update_pmtu,redirect}()David S. Miller
This will be used so that we can compose a full flow key. Even though we have a route in this context, we need more. In the future the routes will be without destination address, source address, etc. keying. One ipv4 route will cover entire subnets, etc. In this environment we have to have a way to possess persistent storage for redirects and PMTU information. This persistent storage will exist in the FIB tables, and that's why we'll need to be able to rebuild a full lookup flow key here. Using that flow key will do a fib_lookup() and create/update the persistent entry. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11ipv4: Add redirect support to all protocol icmp error handlers.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-14ipv4: Handle PMTU in all ICMP error handlers.David S. Miller
With ip_rt_frag_needed() removed, we have to explicitly update PMTU information in every ICMP error handler. Create two helper functions to facilitate this. 1) ipv4_sk_update_pmtu() This updates the PMTU when we have a socket context to work with. 2) ipv4_update_pmtu() Raw version, used when no socket context is available. For this interface, we essentially just pass in explicit arguments for the flow identity information we would have extracted from the socket. And you'll notice that ipv4_sk_update_pmtu() is simply implemented in terms of ipv4_update_pmtu() Note that __ip_route_output_key() is used, rather than something like ip_route_output_flow() or ip_route_output_key(). This is because we absolutely do not want to end up with a route that does IPSEC encapsulation and the like. Instead, we only want the route that would get us to the node described by the outermost IP header. Reported-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15ipv4: fix checkpatch errorsDaniel Baluta
Fix checkpatch errors of the following type: * ERROR: "foo * bar" should be "foo *bar" * ERROR: "(foo*)" should be "(foo *)" Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-14tunnel: implement 64 bits statisticsstephen hemminger
Convert the per-cpu statistics kept for GRE, IPIP, and SIT tunnels to use 64 bit statistics. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02ipv4: Stop using NLA_PUT*().David S. Miller
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12net: ipv4: Standardize prefixes for message loggingJoe Perches
Add #define pr_fmt(fmt) as appropriate. Add "IPv4: ", "TCP: ", and "IPsec: " to appropriate files. Standardize on "UDPLite: " for appropriate uses. Some prefixes were previously "UDPLITE: " and "UDP-Lite: ". Add KBUILD_MODNAME ": " to icmp and gre. Remove embedded prefixes as appropriate. Add missing "\n" to pr_info in gre.c. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11net: Convert printks to pr_<level>Joe Perches
Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/sfc/rx.c Overlapping changes in drivers/net/ethernet/sfc/rx.c, one to change the rx_buf->is_page boolean into a set of u16 flags, and another to adjust how ->ip_summed is initialized. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24gre: fix spelling in commentsstephen hemminger
The original spelling and bad word choice makes these comments hard to read. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15net: replace random_ether_addr() with eth_hw_addr_random()Danny Kukawka
Replace usage of random_ether_addr() with eth_hw_addr_random() to set addr_assign_type correctly to NET_ADDR_RANDOM. Change the trivial cases. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-01-27ipv4: ip_gre: Convert to dst_neigh_lookup()David S. Miller
The conversion is very similar to that made to ipv6's SIT code. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-26ipv6: Fix ip_gre lockless xmits.Willem de Bruijn
Tunnel devices set NETIF_F_LLTX to bypass HARD_TX_LOCK. Sit and ipip set this unconditionally in ops->setup, but gre enables it conditionally after parameter passing in ops->newlink. This is not called during tunnel setup as below, however, so GRE tunnels are still taking the lock. modprobe ip_gre ip tunnel add test0 mode gre remote 10.5.1.1 dev lo ip link set test0 up ip addr add 10.6.0.1 dev test0 # cat /sys/class/net/test0/features # $DIR/test_tunnel_xmit 10 10.5.2.1 ip route add 10.5.2.0/24 dev test0 ip tunnel del test0 The newlink callback is only called in rtnl_netlink, and only if the device is new, as it calls register_netdevice internally. Gre tunnels are created at 'ip tunnel add' with ioctl SIOCADDTUNNEL, which calls ipgre_tunnel_locate, which calls register_netdev. rtnl_newlink is called at 'ip link set', but skips ops->newlink and the device is up with locking still enabled. The equivalent ipip tunnel works fine, btw (just substitute 'method gre' for 'method ipip'). On kernels before /sys/class/net/*/features was removed [1], the first commented out line returns 0x6000 with method gre, which indicates that NETIF_F_LLTX (0x1000) is not set. With ipip, it reports 0x7000. This test cannot be used on recent kernels where the sysfs file is removed (and ETHTOOL_GFEATURES does not currently work for tunnel devices, because they lack dev->ethtool_ops). The second commented out line calls a simple transmission test [2] that sends on 24 cores at maximum rate. Results of a single run: ipip: 19,372,306 gre before patch: 4,839,753 gre after patch: 19,133,873 This patch replicates the condition check in ipgre_newlink to ipgre_tunnel_locate. It works for me, both with oseq on and off. This is the first time I looked at rtnetlink and iproute2 code, though, so someone more knowledgeable should probably check the patch. Thanks. The tail of both functions is now identical, by the way. To avoid code duplication, I'll be happy to rework this and merge the two. [1] http://patchwork.ozlabs.org/patch/104610/ [2] http://kernel.googlecode.com/files/xmit_udp_parallel.c Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-24ip_gre: Fix bug added to ipgre_tunnel_xmit().David S. Miller
We can remove the rt_gateway == 0 check but we shouldn't remove the 'dst' initialization too. Noticed by Eric Dumazet. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-24ipv4: Remove bogus checks of rt_gateway being zero.David S. Miller
It can never actually happen. rt_gateway is either the fully resolved flow lookup key's destination address, or the non-zero FIB entry gateway address. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-11net: use IS_ENABLED(CONFIG_IPV6)Eric Dumazet
Instead of testing defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05net: Rename dst_get_neighbour{, _raw} to dst_get_neighbour_noref{, _raw}.David Miller
To reflect the fact that a refrence is not obtained to the resulting neighbour entry. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Roland Dreier <roland@purestorage.com>
2011-11-18ip_gre: Set needed_headroom dynamically againHerbert Xu
ip_gre: Set needed_headroom dynamically again Now that all needed_headroom users have been fixed up so that we can safely increase needed_headroom, this patch restore the dynamic update of needed_headroom. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08net: better pcpu data alignmentEric Dumazet
Tunnels can force an alignment of their percpu data to reduce number of cache lines used in fast path, or read in .ndo_get_stats() percpu_alloc() is a very fine grained allocator, so any small hole will be used anyway. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-20ip_gre: dont increase dev->needed_headroom on a live deviceEric Dumazet
It seems ip_gre is able to change dev->needed_headroom on the fly. Its is not legal unfortunately and triggers a BUG in raw_sendmsg() skb = sock_alloc_send_skb(sk, ... + LL_ALLOCATED_SPACE(rt->dst.dev) < another cpu change dev->needed_headromm (making it bigger) ... skb_reserve(skb, LL_RESERVED_SPACE(rt->dst.dev)); We end with LL_RESERVED_SPACE() being bigger than LL_ALLOCATED_SPACE() -> we crash later because skb head is exhausted. Bug introduced in commit 243aad83 in 2.6.34 (ip_gre: include route header_len in max_headroom calculation) Reported-by: Elmar Vonlanthen <evonlanthen@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Timo Teräs <timo.teras@iki.fi> CC: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-17net: Abstract dst->neighbour accesses behind helpers.David S. Miller
dst_{get,set}_neighbour() Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05net: call dev_alloc_name from register_netdeviceJiri Pirko
Force dev_alloc_name() to be called from register_netdevice() by dev_get_valid_name(). That allows to remove multiple explicit dev_alloc_name() calls. The possibility to call dev_alloc_name in advance remains. This also fixes veth creation regresion caused by 84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743 Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-04ipv4: Kill rt->rt_{src, dst} usage in IP GRE tunnels.David S. Miller
First, make callers pass on-stack flowi4 to ip_route_output_gre() so they can get at the fully resolved flow key. Next, use that in ipgre_tunnel_xmit() to avoid the need to use rt->rt_{dst,src}. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22inet: constify ip headers and in6_addrEric Dumazet
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-29 10:47:27 +0000