| Age | Commit message (Collapse) | Author |
|---|
|
This preserves the existing IFLA_DSA_MASTER which is part of the uAPI
and creates an alias named IFLA_DSA_CONDUIT.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231023181729.1191071-3-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use more inclusive terms throughout the DSA subsystem by moving away
from "master" which is replaced by "conduit" and "slave" which is
replaced by "user". No functional changes.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As all drivers now provide phylink capabilities (including MAC), the
if() condition in dsa_port_phylink_validate() will always be true. We
will always use the generic validator, which phylink will call itself
if the .validate method isn't populated. Thus, there is now no need to
implement the .validate method, so this implementation can be removed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The KSZ9477 has support for HSR (High-Availability Seamless Redundancy).
One of its offloading (i.e. performed in the switch IC hardware) features
is to duplicate received frame to both HSR aware switch ports.
To achieve this goal - the tail TAG needs to be modified. To be more
specific, both ports must be marked as destination (egress) ones.
The NETIF_F_HW_HSR_DUP flag indicates that the device supports HSR and
assures (in HSR core code) that frame is sent only once from HOST to
switch with tail tag indicating both ports.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In some cases, drivers may need to veto the changing of a MAC address on
a user port. Such is the case with KSZ9477 when it offloads a HSR device,
because it programs the MAC address of multiple ports to a shared
hardware register. Those ports need to have equal MAC addresses for the
lifetime of the HSR offload.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Drivers can provide meaningful error messages which state a reason why
they can't perform an offload, and dsa_slave_changeupper() already has
the infrastructure to propagate these over netlink rather than printing
to the kernel log. So pass the extack argument and modify the xrs700x
driver's port_hsr_join() prototype.
Also take the opportunity and use the extack for the 2 -EOPNOTSUPP cases
from xrs700x_hsr_join().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If we successfully parsed an interface mode with a legacy switch
driver, populate that mode into phylink's supported interfaces rather
than defaulting to the internal and gmii interfaces.
This hasn't caused an issue so far, because when the interface doesn't
match a supported one, phylink_validate() doesn't clear the supported
mask, but instead returns -EINVAL. phylink_parse_fixedlink() doesn't
check this return value, and merely relies on the supported ethtool
link modes mask being cleared. Therefore, the fixed link settings end
up being allowed despite validation failing.
Before this causes a problem, arrange for DSA to more accurately
populate phylink's supported interfaces mask so validation can
correctly succeed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/E1qTKdM-003Cpx-Eh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/dsa/port.c
9945c1fb03a3 ("net: dsa: fix older DSA drivers using phylink")
a88dd7538461 ("net: dsa: remove legacy_pre_march2020 detection")
https://lore.kernel.org/all/20230731102254.2c9868ca@canb.auug.org.au/
net/xdp/xsk.c
3c5b4d69c358 ("net: annotate data-races around sk->sk_mark")
b7f72a30e9ac ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path")
https://lore.kernel.org/all/20230731102631.39988412@canb.auug.org.au/
drivers/net/ethernet/broadcom/bnxt/bnxt.c
37b61cda9c16 ("bnxt: don't handle XDP in netpoll")
2b56b3d99241 ("eth: bnxt: handle invalid Tx completions more gracefully")
https://lore.kernel.org/all/20230801101708.1dc7faac@canb.auug.org.au/
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c
62da08331f1a ("net/mlx5e: Set proper IPsec source port in L4 selector")
fbd517549c32 ("net/mlx5e: Add function to get IPsec offload namespace")
drivers/net/ethernet/sfc/selftest.c
55c1528f9b97 ("sfc: fix field-spanning memcpy in selftest")
ae9d445cd41f ("sfc: Miscellaneous comment removals")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently checksum is recalculated and dsa tag stripped even if we later
don't find the dev.
To improve code, exit early if we don't find the dev and skip additional
operation on the skb since it will be freed anyway.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230730074113.21889-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Older DSA drivers that do not provide an dsa_ops adjust_link method end
up using phylink. Unfortunately, a recent phylink change that requires
its supported_interfaces bitmap to be filled breaks these drivers
because the bitmap remains empty.
Rather than fixing each driver individually, fix it in the core code so
we have a sensible set of defaults.
Reported-by: Sergei Antonov <saproj@gmail.com>
Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com> # dsa_loop
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1qOflM-001AEz-D3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
Even call sites utilizing length-bounded destination buffers should
switch over to using `strtomem` or `strtomem_pad`. In this case,
however, the compiler is unable to determine the size of the `data`
buffer which renders `strtomem` unusable. Due to this, `strscpy`
should be used.
It should be noted that most call sites already zero-initialize the
destination buffer. However, I've opted to use `strscpy_pad` to maintain
the same exact behavior that `strncpy` produced (zero-padded tail up to
`len`).
Also see [3].
[1]: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
[2]: elixir.bootlin.com/linux/v6.3/source/net/ethtool/ioctl.c#L1944
[3]: manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html
Link: https://github.com/KSPP/linux/issues/90
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All drivers are now updated for the March 2020 changes, and no longer
make use of the mac_pcs_get_state() or mac_an_restart() operations,
which are now NULL across all DSA drivers. All DSA drivers don't look
at speed, duplex, pause or advertisement in their phylink_mac_config()
method either.
Remove support for these operations from DSA, and stop marking DSA as
a legacy driver by default.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
incl_srcpt has the limitation, mentioned in commit b4638af8885a ("net:
dsa: sja1105: always enable the INCL_SRCPT option"), that frames with a
MAC DA of 01:80:c2:xx:yy:zz will be received as 01:80:c2:00:00:zz unless
PTP RX timestamping is enabled.
The incl_srcpt option was initially unconditionally enabled, then that
changed with commit 42824463d38d ("net: dsa: sja1105: Limit use of
incl_srcpt to bridge+vlan mode"), then again with b4638af8885a ("net:
dsa: sja1105: always enable the INCL_SRCPT option"). Bottom line is that
it now needs to be always enabled, otherwise the driver does not have a
reliable source of information regarding source_port and switch_id for
link-local traffic (tag_8021q VLANs may be imprecise since now they
identify an entire bridging domain when ports are not standalone).
If we accept that PTP RX timestamping (and therefore, meta frame
generation) is always enabled in hardware, then that limitation could be
avoided and packets with any MAC DA can be properly received, because
meta frames do contain the original bytes from the MAC DA of their
associated link-local packet.
This change enables meta frame generation unconditionally, which also
has the nice side effects of simplifying the switch control path
(a switch reset is no longer required on hwtstamping settings change)
and the tagger data path (it no longer needs to be informed whether to
expect meta frames or not - it always does).
Fixes: 227d07a07ef1 ("net: dsa: sja1105: Add support for traffic through standalone ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The SJA1105 manual says that at offset 4 into the meta frame payload we
have "MAC destination byte 2" and at offset 5 we have "MAC destination
byte 1". These are counted from the LSB, so byte 1 is h_dest[ETH_HLEN-2]
aka h_dest[4] and byte 2 is h_dest[ETH_HLEN-3] aka h_dest[3].
The sja1105_meta_unpack() function decodes these the other way around,
so a frame with MAC DA 01:80:c2:11:22:33 is received by the network
stack as having 01:80:c2:22:11:33.
Fixes: e53e18a6fe4d ("net: dsa: sja1105: Receive and decode meta frames")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There was a regression introduced by the blamed commit, where pinging to
a VLAN-unaware bridge would fail with the repeated message "Couldn't
decode source port" coming from the tagging protocol driver.
When receiving packets with a bridge_vid as determined by
dsa_tag_8021q_bridge_join(), dsa_8021q_rcv() will decode:
- source_port = 0 (which isn't really valid, more like "don't know")
- switch_id = 0 (which isn't really valid, more like "don't know")
- vbid = value in range 1-7
Since the blamed patch has reversed the order of the checks, we are now
going to believe that source_port != -1 and switch_id != -1, so they're
valid, but they aren't.
The minimal solution to the problem is to only populate source_port and
switch_id with what dsa_8021q_rcv() came up with, if the vbid is zero,
i.e. the source port information is trustworthy.
Fixes: c1ae02d87689 ("net: dsa: tag_sja1105: always prefer source port information from INCL_SRCPT")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the sja1105 tagging protocol prefers using the source port
information from the VLAN header if that is available, falling back to
the INCL_SRCPT option if it isn't. The VLAN header is available for all
frames except for META frames initiated by the switch (containing RX
timestamps), and thus, the "if (is_link_local)" branch is practically
dead.
The tag_8021q source port identification has become more loose
("imprecise") and will report a plausible rather than exact bridge port,
when under a bridge (be it VLAN-aware or VLAN-unaware). But link-local
traffic always needs to know the precise source port. With incorrect
source port reporting, for example PTP traffic over 2 bridged ports will
all be seen on sockets opened on the first such port, which is incorrect.
Now that the tagging protocol has been changed to make link-local frames
always contain source port information, we can reverse the order of the
checks so that we always give precedence to that information (which is
always precise) in lieu of the tag_8021q VID which is only precise for a
standalone port.
Fixes: d7f9787a763f ("net: dsa: tag_8021q: add support for imprecise RX based on the VBID")
Fixes: 91495f21fcec ("net: dsa: tag_8021q: replace the SVL bridging with VLAN-unaware IVL bridging")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Merge in late fixes to prepare for the 6.5 net-next PR.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When using the felix driver (the only one which supports UC filtering
and MC filtering) as a DSA master for a random other DSA switch, one can
see the following stack trace when the downstream switch ports join a
VLAN-aware bridge:
=============================
WARNING: suspicious RCU usage
-----------------------------
net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage!
stack backtrace:
Workqueue: dsa_ordered dsa_slave_switchdev_event_work
Call trace:
lockdep_rcu_suspicious+0x170/0x210
vlan_for_each+0x8c/0x188
dsa_slave_sync_uc+0x128/0x178
__hw_addr_sync_dev+0x138/0x158
dsa_slave_set_rx_mode+0x58/0x70
__dev_set_rx_mode+0x88/0xa8
dev_uc_add+0x74/0xa0
dsa_port_bridge_host_fdb_add+0xec/0x180
dsa_slave_switchdev_event_work+0x7c/0x1c8
process_one_work+0x290/0x568
What it's saying is that vlan_for_each() expects rtnl_lock() context and
it's not getting it, when it's called from the DSA master's ndo_set_rx_mode().
The caller of that - dsa_slave_set_rx_mode() - is the slave DSA
interface's dsa_port_bridge_host_fdb_add() which comes from the deferred
dsa_slave_switchdev_event_work().
We went to great lengths to avoid the rtnl_lock() context in that call
path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from
dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not
an option due to the possibility of deadlocking when calling
dsa_flush_workqueue() from the call paths that do hold rtnl_lock() -
basically all of them.
So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(),
the state of the 8021q driver on this device is really not protected
from concurrent access by anything.
Looking at net/8021q/, I don't think that vlan_info->vid_list was
particularly designed with RCU traversal in mind, so introducing an RCU
read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so
easy, and it also wouldn't be exactly what we need anyway.
In general I believe that the solution isn't in net/8021q/ anyway;
vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock()
to be held per se - since it's not a netdev state change that we're
blocking, but rather, just concurrent additions/removals to a VLAN list.
We don't even need sleepable context - the callback of vlan_for_each()
just schedules deferred work.
The proposed escape is to remove the dependency on vlan_for_each() and
to open-code a non-sleepable, rtnl-free alternative to that, based on
copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and
.ndo_vlan_rx_kill_vid().
Fixes: 64fdc5f341db ("net: dsa: sync unicast and multicast addresses for VLAN filters too")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230626154402.3154454-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
tools/testing/selftests/net/fcnal-test.sh
d7a2fc1437f7 ("selftests: net: fcnal-test: check if FIPS mode is enabled")
dd017c72dde6 ("selftests: fcnal: Test SO_DONTROUTE on TCP sockets.")
https://lore.kernel.org/all/5007b52c-dd16-dbf6-8d64-b9701bfa498b@tessares.net/
https://lore.kernel.org/all/20230619105427.4a0df9b3@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the introduction of the OF bindings, DSA has always had a policy that
in case multiple CPU ports are present in the device tree, the numerically
smallest one is always chosen.
The MT7530 switch family, except the switch on the MT7988 SoC, has 2 CPU
ports, 5 and 6, where port 6 is preferable on the MT7531BE switch because
it has higher bandwidth.
The MT7530 driver developers had 3 options:
- to modify DSA when the MT7531 switch support was introduced, such as to
prefer the better port
- to declare both CPU ports in device trees as CPU ports, and live with the
sub-optimal performance resulting from not preferring the better port
- to declare just port 6 in the device tree as a CPU port
Of course they chose the path of least resistance (3rd option), kicking the
can down the road. The hardware description in the device tree is supposed
to be stable - developers are not supposed to adopt the strategy of
piecemeal hardware description, where the device tree is updated in
lockstep with the features that the kernel currently supports.
Now, as a result of the fact that they did that, any attempts to modify the
device tree and describe both CPU ports as CPU ports would make DSA change
its default selection from port 6 to 5, effectively resulting in a
performance degradation visible to users with the MT7531BE switch as can be
seen below.
Without preferring port 6:
[ ID][Role] Interval Transfer Bitrate Retr
[ 5][TX-C] 0.00-20.00 sec 374 MBytes 157 Mbits/sec 734 sender
[ 5][TX-C] 0.00-20.00 sec 373 MBytes 156 Mbits/sec receiver
[ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 778 Mbits/sec 0 sender
[ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 777 Mbits/sec receiver
With preferring port 6:
[ ID][Role] Interval Transfer Bitrate Retr
[ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 856 Mbits/sec 273 sender
[ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 855 Mbits/sec receiver
[ 7][RX-C] 0.00-20.00 sec 1.72 GBytes 737 Mbits/sec 15 sender
[ 7][RX-C] 0.00-20.00 sec 1.71 GBytes 736 Mbits/sec receiver
Using one port for WAN and the other ports for LAN is a very popular use
case which is what this test emulates.
As such, this change proposes that we retroactively modify stable kernels
(which don't support the modification of the CPU port assignments, so as to
let user space fix the problem and restore the throughput) to keep the
mt7530 driver preferring port 6 even with device trees where the hardware
is more fully described.
Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add DSA support for the phylink mac_prepare() and mac_finish() calls.
These were introduced as part of the PCS support to allow MACs to
perform preparatory steps prior to configuration, and finalisation
steps after the MAC and PCS has been configured.
Introducing phylink_pcs support to the mv88e6xxx DSA driver needs some
code moved out of its mac_config() stage into the mac_prepare() and
mac_finish() stages, and this commit facilitates such code in DSA
drivers.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ocelot_xmit_get_vlan_info() calls __skb_vlan_pop() as the most
appropriate helper I could find which strips away a VLAN header.
That's all I need it to do, but __skb_vlan_pop() has more logic, which
will become incompatible with the future revert of commit 6d1ccff62780
("net: reset mac header in dev_start_xmit()").
Namely, it performs a sanity check on skb_mac_header(), which will stop
being set after the above revert, so it will return an error instead of
removing the VLAN tag.
ocelot_xmit_get_vlan_info() gets called in 2 circumstances:
(1) the port is under a VLAN-aware bridge and the bridge sends
VLAN-tagged packets
(2) the port is under a VLAN-aware bridge and somebody else (an 8021q
upper) sends VLAN-tagged packets (using a VID that isn't in the
bridge vlan tables)
In case (1), there is actually no bug to defend against, because
br_dev_xmit() calls skb_reset_mac_header() and things continue to work.
However, in case (2), illustrated using the commands below, it can be
seen that our intervention is needed, since __skb_vlan_pop() complains:
$ ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up
$ ip link set $eth master br0 && ip link set $eth up
$ ip link add link $eth name $eth.100 type vlan id 100 && ip link set $eth.100 up
$ ip addr add 192.168.100.1/24 dev $eth.100
I could fend off the checks in __skb_vlan_pop() with some
skb_mac_header_was_set() calls, but seeing how few callers of
__skb_vlan_pop() there are from TX paths, that seems rather
unproductive.
As an alternative solution, extract the bare minimum logic to strip a
VLAN header, and move it to a new helper named vlan_remove_tag(), close
to the definition of vlan_insert_tag(). Document it appropriately and
make ocelot_xmit_get_vlan_info() call this smaller helper instead.
Seeing that it doesn't appear illegal to test skb->protocol in the TX
path, I guess it would be a good for vlan_remove_tag() to also absorb
the vlan_set_encap_proto() function call.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Once commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()")
will be reverted, it will no longer be true that skb->data points at
skb_mac_header(skb) - since the skb->mac_header will not be set - so
stop saying that, and just say that it points to the MAC header.
I've reviewed vlan_insert_tag() and it does not *actually* depend on
skb_mac_header(), so reword that to avoid the confusion.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a cosmetic patch which consolidates the code to use the helper
function offered by if_vlan.h.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb_mac_header() will no longer be available in the TX path when
reverting commit 6d1ccff62780 ("net: reset mac header in
dev_start_xmit()"). As preparation for that, let's use
skb_vlan_eth_hdr() to get to the VLAN header instead, which assumes it's
located at skb->data (assumption which holds true here).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb_mac_header() will no longer be available in the TX path when
reverting commit 6d1ccff62780 ("net: reset mac header in
dev_start_xmit()"). As preparation for that, let's use skb_eth_hdr() to
get to the Ethernet header's MAC DA instead, helper which assumes this
header is located at skb->data (assumption which holds true here).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb_mac_header() will no longer be available in the TX path when
reverting commit 6d1ccff62780 ("net: reset mac header in
dev_start_xmit()"). As preparation for that, let's use
skb_vlan_eth_hdr() to get to the VLAN header instead, which assumes it's
located at skb->data (assumption which holds true here).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These are not as critical as the FDB/MDB trace points (I'm not aware of
outstanding VLAN related bugs), but maybe they are useful to somebody,
either debugging something or simply trying to learn more.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DSA performs non-trivial housekeeping of unicast and multicast addresses
on shared (CPU and DSA) ports, and puts a bit of pressure on higher
layers, requiring them to behave correctly (remove these addresses
exactly as many times as they were added). Otherwise, either addresses
linger around forever, or DSA returns -ENOENT complaining that entries
that were already deleted must be deleted again.
To aid debugging, introduce some trace points specifically for FDB and
MDB - that's where some of the bugs still are right now.
Some bugs I have seen were also due to race conditions, see:
- 630fd4822af2 ("net: dsa: flush switchdev workqueue on bridge join error path")
- a2614140dc0f ("net: dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN")
so it would be good to not disturb the timing too much, hence the choice
to use trace points vs regular dev_dbg().
I've had these for some time on my computer in a less polished form, and
they've proven useful. What I found most useful was to enable
CONFIG_BOOTTIME_TRACING, add "trace_event=dsa" to the kernel cmdline,
and run "cat /sys/kernel/debug/tracing/trace". This is to debug more
complex environments with network managers started by the init system,
things like that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There was a sort of rush surrounding commit 88c0a6b503b7 ("net: create a
netdev notifier for DSA to reject PTP on DSA master"), due to a desire
to convert DSA's attempt to deny TX timestamping on a DSA master to
something that doesn't block the kernel-wide API conversion from
ndo_eth_ioctl() to ndo_hwtstamp_set().
What was required was a mechanism that did not depend on ndo_eth_ioctl(),
and what was provided was a mechanism that did not depend on
ndo_eth_ioctl(), while at the same time introducing something that
wasn't absolutely necessary - a new netdev notifier.
There have been objections from Jakub Kicinski that using notifiers in
general when they are not absolutely necessary creates complications to
the control flow and difficulties to maintainers who look at the code.
So there is a desire to not use notifiers.
In addition to that, the notifier chain gets called even if there is no
DSA in the system and no one is interested in applying any restriction.
Take the model of udp_tunnel_nic_ops and introduce a stub mechanism,
through which net/core/dev_ioctl.c can call into DSA even when
CONFIG_NET_DSA=m.
Compared to the code that existed prior to the notifier conversion, aka
what was added in commits:
- 4cfab3566710 ("net: dsa: Add wrappers for overloaded ndo_ops")
- 3369afba1e46 ("net: Call into DSA netdevice_ops wrappers")
this is different because we are not overloading any struct
net_device_ops of the DSA master anymore, but rather, we are exposing a
rather specific functionality which is orthogonal to which API is used
to enable it - ndo_eth_ioctl() or ndo_hwtstamp_set().
Also, what is similar is that both approaches use function pointers to
get from built-in code to DSA.
There is no point in replicating the function pointers towards
__dsa_master_hwtstamp_validate() once for every CPU port (dev->dsa_ptr).
Instead, it is sufficient to introduce a singleton struct dsa_stubs,
built into the kernel, which contains a single function pointer to
__dsa_master_hwtstamp_validate().
I find this approach preferable to what we had originally, because
dev->dsa_ptr->netdev_ops->ndo_do_ioctl() used to require going through
struct dsa_port (dev->dsa_ptr), and so, this was incompatible with any
attempts to add any data encapsulation and hide DSA data structures from
the outside world.
Link: https://lore.kernel.org/netdev/20230403083019.120b72fd@kernel.org/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The fact that PTP 2-step TX timestamping is broken on DSA switches if
the master also timestamps the same packets is documented by commit
f685e609a301 ("net: dsa: Deny PTP on master if switch supports it").
We attempt to help the users avoid shooting themselves in the foot by
making DSA reject the timestamping ioctls on an interface that is a DSA
master, and the switch tree beneath it contains switches which are aware
of PTP.
The only problem is that there isn't an established way of intercepting
ndo_eth_ioctl calls, so DSA creates avoidable burden upon the network
stack by creating a struct dsa_netdevice_ops with overlaid function
pointers that are manually checked from the relevant call sites. There
used to be 2 such dsa_netdevice_ops, but now, ndo_eth_ioctl is the only
one left.
There is an ongoing effort to migrate driver-visible hardware timestamping
control from the ndo_eth_ioctl() based API to a new ndo_hwtstamp_set()
model, but DSA actively prevents that migration, since dsa_master_ioctl()
is currently coded to manually call the master's legacy ndo_eth_ioctl(),
and so, whenever a network device driver would be converted to the new
API, DSA's restrictions would be circumvented, because any device could
be used as a DSA master.
The established way for unrelated modules to react on a net device event
is via netdevice notifiers. So we create a new notifier which gets
called whenever there is an attempt to change hardware timestamping
settings on a device.
Finally, there is another reason why a netdev notifier will be a good
idea, besides strictly DSA, and this has to do with PHY timestamping.
With ndo_eth_ioctl(), all MAC drivers must manually call
phy_has_hwtstamp() before deciding whether to act upon SIOCSHWTSTAMP,
otherwise they must pass this ioctl to the PHY driver via
phy_mii_ioctl().
With the new ndo_hwtstamp_set() API, it will be desirable to simply not
make any calls into the MAC device driver when timestamping should be
performed at the PHY level.
But there exist drivers, such as the lan966x switch, which need to
install packet traps for PTP regardless of whether they are the layer
that provides the hardware timestamps, or the PHY is. That would be
impossible to support with the new API.
The proposal there, too, is to introduce a netdev notifier which acts as
a better cue for switching drivers to add or remove PTP packet traps,
than ndo_hwtstamp_set(). The one introduced here "almost" works there as
well, except for the fact that packet traps should only be installed if
the PHY driver succeeded to enable hardware timestamping, whereas here,
we need to deny hardware timestamping on the DSA master before it
actually gets enabled. This is why this notifier is called "PRE_", and
the notifier that would get used for PHY timestamping and packet traps
would be called NETDEV_CHANGE_HWTSTAMP. This isn't a new concept, for
example NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER do the same thing.
In expectation of future netlink UAPI, we also pass a non-NULL extack
pointer to the netdev notifier, and we make DSA populate it with an
informative reason for the rejection. To avoid making it go to waste, we
make the ioctl-based dev_set_hwtstamp() create a fake extack and print
the message to the kernel log.
Link: https://lore.kernel.org/netdev/20230401191215.tvveoi3lkawgg6g4@skbuf/
Link: https://lore.kernel.org/netdev/20230310164451.ls7bbs6pdzs4m6pw@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dsa_master_ioctl() is in the process of getting converted to a different
API, where we won't have access to a struct ifreq * anymore, but rather,
to a struct kernel_hwtstamp_config.
Since ds->ops->port_hwtstamp_get() still uses struct ifreq *, this
creates a difficult situation where we have to make up such a dummy
pointer.
The conversion is a bit messy, because it forces a "good" implementation
of ds->ops->port_hwtstamp_get() to return -EFAULT in copy_to_user()
because of the NULL ifr->ifr_data pointer. However, it works, and it is
only a transient step until ds->ops->port_hwtstamp_get() gets converted
to the new API which passes struct kernel_hwtstamp_config and does not
call copy_to_user().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have the following code paths:
Host FDB (unicast RX filtering):
dsa_port_standalone_host_fdb_add() dsa_port_bridge_host_fdb_add()
| |
+--------------+ +------------+
| |
v v
dsa_port_host_fdb_add()
dsa_port_standalone_host_fdb_del() dsa_port_bridge_host_fdb_del()
| |
+--------------+ +------------+
| |
v v
dsa_port_host_fdb_del()
Host MDB (multicast RX filtering):
dsa_port_standalone_host_mdb_add() dsa_port_bridge_host_mdb_add()
| |
+--------------+ +------------+
| |
v v
dsa_port_host_mdb_add()
dsa_port_standalone_host_mdb_del() dsa_port_bridge_host_mdb_del()
| |
+--------------+ +------------+
| |
v v
dsa_port_host_mdb_del()
The logic added by commit 5e8a1e03aa4d ("net: dsa: install secondary
unicast and multicast addresses as host FDB/MDB") zeroes out
db.bridge.num if the switch doesn't support ds->fdb_isolation
(the majority doesn't). This is done for a reason explained in commit
c26933639b54 ("net: dsa: request drivers to perform FDB isolation").
Taking a single code path as example - dsa_port_host_fdb_add() - the
others are similar - the problem is that this function handles:
- DSA_DB_PORT databases, when called from
dsa_port_standalone_host_fdb_add()
- DSA_DB_BRIDGE databases, when called from
dsa_port_bridge_host_fdb_add()
So, if dsa_port_host_fdb_add() were to make any change on the
"bridge.num" attribute of the database, this would only be correct for a
DSA_DB_BRIDGE, and a type confusion for a DSA_DB_PORT bridge.
However, this bug is without consequences, for 2 reasons:
- dsa_port_standalone_host_fdb_add() is only called from code which is
(in)directly guarded by dsa_switch_supports_uc_filtering(ds), and that
function only returns true if ds->fdb_isolation is set. So, the code
only executed for DSA_DB_BRIDGE databases.
- Even if the code was not dead for DSA_DB_PORT, we have the following
memory layout:
struct dsa_bridge {
struct net_device *dev;
unsigned int num;
bool tx_fwd_offload;
refcount_t refcount;
};
struct dsa_db {
enum dsa_db_type type;
union {
const struct dsa_port *dp; // DSA_DB_PORT
struct dsa_lag lag;
struct dsa_bridge bridge; // DSA_DB_BRIDGE
};
};
So, the zeroization of dsa_db :: bridge :: num on a dsa_db structure of
type DSA_DB_PORT would access memory which is unused, because we only
use dsa_db :: dp for DSA_DB_PORT, and this is mapped at the same address
with dsa_db :: dev for DSA_DB_BRIDGE, thanks to the union definition.
It is correct to fix up dsa_db :: bridge :: num only from code paths
that come from the bridge / switchdev, so move these there.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230329133819.697642-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If certain conditions are met, DSA can install all necessary MAC
addresses on the CPU ports as FDB entries and disable flooding towards
the CPU (we call this RX filtering).
There is one corner case where this does not work.
ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up
ip link set swp0 master br0 && ip link set swp0 up
ip link add link swp0 name swp0.100 type vlan id 100
ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100
Traffic through swp0.100 is broken, because the bridge turns on VLAN
filtering in the swp0 port (causing RX packets to be classified to the
FDB database corresponding to the VID from their 802.1Q header), and
although the 8021q module does call dev_uc_add() towards the real
device, that API is VLAN-unaware, so it only contains the MAC address,
not the VID; and DSA's current implementation of ndo_set_rx_mode() is
only for VID 0 (corresponding to FDB entries which are installed in an
FDB database which is only hit when the port is VLAN-unaware).
It's interesting to understand why the bridge does not turn on
IFF_PROMISC for its swp0 bridge port, and it may appear at first glance
that this is a regression caused by the logic in commit 2796d0c648c9
("bridge: Automatically manage port promiscuous mode."). After all,
a bridge port needs to have IFF_PROMISC by its very nature - it needs to
receive and forward frames with a MAC DA different from the bridge
ports' MAC addresses.
While that may be true, when the bridge is VLAN-aware *and* it has a
single port, there is no real reason to enable promiscuity even if that
is an automatic port, with flooding and learning (there is nowhere for
packets to go except to the BR_FDB_LOCAL entries), and this is how the
corner case appears. Adding a second automatic interface to the bridge
would make swp0 promisc as well, and would mask the corner case.
Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't
pass a VLAN ID), the only way to address that problem is to install host
FDB entries for the cartesian product of RX filtering MAC addresses and
VLAN RX filters.
Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When BCM63xx internal switches are connected to switches with a 4-byte
Broadcom tag, it does not identify the packet as VLAN tagged, so it adds one
based on its PVID (which is likely 0).
Right now, the packet is received by the BCM63xx internal switch and the 6-byte
tag is properly processed. The next step would to decode the corresponding
4-byte tag. However, the internal switch adds an invalid VLAN tag after the
6-byte tag and the 4-byte tag handling fails.
In order to fix this we need to remove the invalid VLAN tag after the 6-byte
tag before passing it to the 4-byte tag decoding.
Fixes: 964dbf186eaa ("net: dsa: tag_brcm: add support for legacy tags")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230319095540.239064-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We collect the software statistics counters for RX bytes (reported to
/proc/net/dev and to ethtool -S $dev | grep 'rx_bytes: ") at a time when
skb->len has already been adjusted by the eth_type_trans() ->
skb_pull_inline(skb, ETH_HLEN) call to exclude the L2 header.
This means that when connecting 2 DSA interfaces back to back and
sending 1 packet with length 100, the sending interface will report
tx_bytes as incrementing by 100, and the receiving interface will report
rx_bytes as incrementing by 86.
Since accounting for that in scripts is quirky and is something that
would be DSA-specific behavior (requiring users to know that they are
running on a DSA interface in the first place), the proposal is that we
treat it as a bug and fix it.
This design bug has always existed in DSA, according to my analysis:
commit 91da11f870f0 ("net: Distributed Switch Architecture protocol
support") also updates skb->dev->stats.rx_bytes += skb->len after the
eth_type_trans() call. Technically, prior to Florian's commit
a86d8becc3f0 ("net: dsa: Factor bottom tag receive functions"), each and
every vendor-specific tagging protocol driver open-coded the same bug,
until the buggy code was consolidated into something resembling what can
be seen now. So each and every driver should have its own Fixes: tag,
because of their different histories until the convergence point.
I'm not going to do that, for the sake of simplicity, but just blame the
oldest appearance of buggy code.
There are 2 ways to fix the problem. One is the obvious way, and the
other is how I ended up doing it. Obvious would have been to move
dev_sw_netstats_rx_add() one line above eth_type_trans(), and below
skb_push(skb, ETH_HLEN). But DSA processing is not as simple as that.
We count the bytes after removing everything DSA-related from the
packet, to emulate what the packet's length was, on the wire, when the
user port received it.
When eth_type_trans() executes, dsa_untag_bridge_pvid() has not run yet,
so in case the switch driver requests this behavior - commit
412a1526d067 ("net: dsa: untag the bridge pvid from rx skbs") has the
details - the obvious variant of the fix wouldn't have worked, because
the positioning there would have also counted the not-yet-stripped VLAN
header length, something which is absent from the packet as seen on the
wire (there it may be untagged, whereas software will see it as
PVID-tagged).
Fixes: f613ed665bb3 ("net: dsa: Add support for 64-bit statistics")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, when dsa_slave_change_mtu() is called on a user port where
dev->max_mtu is 1500 (as returned by ds->ops->port_max_mtu()), the code
will stumble upon this check:
if (new_master_mtu > mtu_limit)
return -ERANGE;
because new_master_mtu is adjusted for the tagger overhead but mtu_limit
is not.
But it would be good if the logic went through, for example if the DSA
master really depends on an MTU adjustment to accept DSA-tagged frames.
To make the code pass through the check, we need to adjust mtu_limit for
the overhead as well, if the minimum restriction was caused by the DSA
user port's MTU (dev->max_mtu). A DSA user port MTU and a DSA master MTU
are always offset by the protocol overhead.
Currently no drivers return 1500 .port_max_mtu(), but this is only
temporary and a bug in itself - mv88e6xxx should have done that, but
since commit b9c587fed61c ("dsa: mv88e6xxx: Include tagger overhead when
setting MTU for DSA and CPU ports") it no longer does. This is a
preparation for fixing that.
Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that commit 028fb19c6ba7 ("netlink: provide an ability to set
default extack message") provides a weak function that doesn't override
an existing extack message provided by the driver, it makes sense to use
it also for LAG and HSR offloading, not just for bridge offloading.
Also consistently put the message string on a separate line, to reduce
line length from 92 to 84 characters.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230202140354.3158129-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20230201081438.3151-1-liubo03@inspur.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In netdev common pattern, extack pointer is forwarded to the drivers
to be filled with error message. However, the caller can easily
overwrite the filled message.
Instead of adding multiple "if (!extack->_msg)" checks before any
NL_SET_ERR_MSG() call, which appears after call to the driver, let's
add new macro to common code.
[1] https://lore.kernel.org/all/Y9Irgrgf3uxOjwUm@unreal
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/6993fac557a40a1973dfa0095107c3d03d40bec1.1675171790.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
LAN937x family of switches has 8 queues per port where the KSZ switches
has 4 queues per port. By default, only one queue per port is enabled.
The queues are configurable in 2, 4 or 8. This patch add 8 number of
queues for LAN937x and 4 for other switches.
In the tag_ksz.c file, prioirty of the packet is queried using the skb
buffer and the corresponding value is updated in the tag.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DSA core is in charge of the ethtool_ops of the net devices
associated with switch ports, so in case a hardware driver supports the
MAC merge layer, DSA must pass the callbacks through to the driver.
Add support for precisely that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For PDelay_Resp messages we will likely have a negative value in the
correction field. The switch hardware cannot correctly update such
values (produces an off by one error in the UDP checksum), so it must be
moved to the time stamp field in the tail tag. Format of the correction
field is 48 bit ns + 16 bit fractional ns. After updating the
correction field, clone is no longer required hence it is freed.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the routines for transmission of ptp packets. When the
ptp pdelay_req packet to be transmitted, it uses the deferred xmit
worker to schedule the packets.
During irq_setup, interrupt for Sync, Pdelay_req and Pdelay_rsp are
enabled. So interrupt is triggered for all three packets. But for
p2p1step, we require only time stamp of Pdelay_req packet. Hence to
avoid posting of the completion from ISR routine for Sync and
Pdelay_resp packets, ts_en flag is introduced. This controls which
packets need to processed for timestamp.
After the packet is transmitted, ISR is triggered. The time at which
packet transmitted is recorded to separate register.
This value is reconstructed to absolute time and posted to the user
application through socket error queue.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rx Timestamping is done through 4 additional bytes in tail tag.
Whenever the ptp packet is received, the 4 byte hardware time stamped
value is added before 1 byte tail tag. Also, bit 7 in tail tag indicates
it as PTP frame. This 4 byte value is extracted from the tail tag and
reconstructed to absolute time and assigned to skb hwtstamp.
If the packet received in PDelay_Resp, then partial ingress timestamp
is subtracted from the correction field. Since user space tools expects
to be done in hardware.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the PTP is enabled in hardware bit 6 of PTP_MSG_CONF1 register, the
transmit frame needs additional 4 bytes before the tail tag. It is
needed for all the transmission packets irrespective of PTP packets or
not.
The 4-byte timestamp field is 0 for frames other than Pdelay_Resp. For
the one-step Pdelay_Resp, the switch needs the receive timestamp of the
Pdelay_Req message so that it can put the turnaround time in the
correction field.
Since PTP has to be enabled for both Transmission and reception
timestamping, driver needs to track of the tx and rx setting of the all
the user ports in the switch.
Two flags hw_tx_en and hw_rx_en are added in ksz_port to track the
timestampping setting of each port. When any one of ports has tx or rx
timestampping enabled, bit 6 of PTP_MSG_CONF1 is set and it is indicated
to tag_ksz.c through tagger bytes. This flag adds 4 additional bytes to
the tail tag. When tx and rx timestamping of all the ports are disabled,
then 4 bytes are not added.
Tested using hwstamp -i <interface>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com> # mostly api
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge in the left-over fixes before the net-next pull-request.
net/mptcp/subflow.c
d3295fee3c75 ("mptcp: use proper req destructor for IPv6")
36b122baf6a8 ("mptcp: add subflow_v(4,6)_send_synack()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If dsa_tag_8021q_setup() fails, for example due to the inability of the
device to install a VLAN, the tag_8021q context of the switch will leak.
Make sure it is freed on the error path.
Fixes: 328621f6131f ("net: dsa: tag_8021q: absorb dsa_8021q_setup into dsa_tag_8021q_{,un}register")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221209235242.480344-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
timestamping
ptp_classify_raw() is not exactly cheap, since it invokes a BPF program
for every skb in the receive path. For switches which do not provide
ds->ops->port_rxtstamp(), running ptp_classify_raw() provides precisely
nothing, so check for the presence of the function pointer first, since
that is much cheaper.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20221209175840.390707-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
