| Age | Commit message (Collapse) | Author |
|---|
|
KMSAN will complain if valid address length passed to bind() is shorter
than sizeof(struct sockaddr_sco) bytes.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add HCI_QUIRK_USE_BDADDR_PROPERTY to allow controllers to retrieve
the public Bluetooth address from the firmware node property
'local-bd-address'. If quirk is set and the property does not exist
or is invalid the controller is marked as unconfigured.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Tested-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.
So, change the following form:
sizeof(*rp) + (sizeof(rp->entry[0]) * count);
to :
struct_size(rp, entry, count)
Notice that, in this case, variable rp_len is not necessary, hence
it is removed.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
Here's the main bluetooth-next pull request for the 5.1 kernel.
- Fixes & improvements to mediatek, hci_qca, btrtl, and btmrvl HCI drivers
- Fixes to parsing invalid L2CAP config option sizes
- Locking fix to bt_accept_enqueue()
- Add support for new Marvel sd8977 chipset
- Various other smaller fixes & cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
size = sizeof(struct foo) + count * sizeof(struct boo);
instance = alloc(size, GFP_KERNEL)
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
size = struct_size(instance, entry, count);
instance = alloc(size, GFP_KERNEL)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.
So, change the following form:
sizeof(*ev) + ev->num_hndl * sizeof(struct hci_comp_pkts_info)
to :
struct_size(ev, handles, ev->num_hndl)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
When releasing socket, it is possible to enter hci_sock_release() and
hci_sock_dev_event(HCI_DEV_UNREG) at the same time in different thread.
The reference count of hdev should be decremented only once from one of
them but if storing hdev to local variable in hci_sock_release() before
detached from socket and setting to NULL in hci_sock_dev_event(),
hci_dev_put(hdev) is unexpectedly called twice. This is resolved by
referencing hdev from socket after bt_sock_unlink() in
hci_sock_release().
Reported-by: syzbot+fdc00003f4efff43bc5b@syzkaller.appspotmail.com
Signed-off-by: Myungho Jung <mhjungk@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
As part of y2038 solution, all internal uses of
struct timeval are replaced by struct __kernel_old_timeval
and struct compat_timeval by struct old_timeval32.
Make socket timestamps use these new types.
This is mainly to be able to verify that the kernel build
is y2038 safe when such non y2038 safe types are not
supported anymore.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Cc: isdn@linux-pingi.de
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Don't populate the const array hw_err on the stack but instead make
it static. Makes the object code smaller by 45 bytes:
Before:
text data bss dec hex filename
100880 21090 1088 123058 1e0b2 linux/net/bluetooth/hci_core.o
After:
text data bss dec hex filename
100739 21186 1088 123013 1e085 linux/net/bluetooth/hci_core.o
(gcc version 8.2.0 x86_64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Add a hook to allow the BT driver to do device or command specific
handling in case of timeouts. This is to be used by Intel driver to
reset the device after certain number of timeouts.
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warnings:
net/bluetooth/rfcomm/core.c:479:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
net/bluetooth/l2cap_core.c:4223:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The function l2cap_get_conf_opt will return L2CAP_CONF_OPT_SIZE + opt->len
as length value. The opt->len however is in control over the remote user
and can be used by an attacker to gain access beyond the bounds of the
actual packet.
To prevent any potential leak of heap memory, it is enough to check that
the resulting len calculation after calling l2cap_get_conf_opt is not
below zero. A well formed packet will always return >= 0 here and will
end with the length value being zero after the last option has been
parsed. In case of malformed packets messing with the opt->len field the
length value will become negative. If that is the case, then just abort
and ignore the option.
In case an attacker uses a too short opt->len value, then garbage will
be parsed, but that is protected by the unknown option handling and also
the option parameter size checks.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
When doing option parsing for standard type values of 1, 2 or 4 octets,
the value is converted directly into a variable instead of a pointer. To
avoid being tricked into being a pointer, check that for these option
types that sizes actually match. In L2CAP every option is fixed size and
thus it is prudent anyway to ensure that the remote side sends us the
right option size along with option paramters.
If the option size is not matching the option type, then that option is
silently ignored. It is a protocol violation and instead of trying to
give the remote attacker any further hints just pretend that option is
not present and proceed with the default values. Implementation
following the specification and its qualification procedures will always
use the correct size and thus not being impacted here.
To keep the code readable and consistent accross all options, a few
cosmetic changes were also required.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
With commit e16337622016 ("Bluetooth: Handle bt_accept_enqueue() socket
atomically") lock_sock[_nested]() is used to acquire the socket lock
before manipulating the socket. lock_sock[_nested]() may block, which
is problematic since bt_accept_enqueue() can be called in bottom half
context (e.g. from rfcomm_connect_ind()):
[<ffffff80080d81ec>] __might_sleep+0x4c/0x80
[<ffffff800876c7b0>] lock_sock_nested+0x24/0x58
[<ffffff8000d7c27c>] bt_accept_enqueue+0x48/0xd4 [bluetooth]
[<ffffff8000e67d8c>] rfcomm_connect_ind+0x190/0x218 [rfcomm]
Add a parameter to bt_accept_enqueue() to indicate whether the
function is called from BH context, and acquire the socket lock
with bh_lock_sock_nested() if that's the case.
Also adapt all callers of bt_accept_enqueue() to pass the new
parameter:
- l2cap_sock_new_connection_cb()
- uses lock_sock() to lock the parent socket => process context
- rfcomm_connect_ind()
- acquires the parent socket lock with bh_lock_sock() => BH
context
- __sco_chan_add()
- called from sco_chan_add(), which is called from sco_connect().
parent is NULL, hence bt_accept_enqueue() isn't called in this
code path and we can ignore it
- also called from sco_conn_ready(). uses bh_lock_sock() to acquire
the parent lock => BH context
Fixes: e16337622016 ("Bluetooth: Handle bt_accept_enqueue() socket atomically")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
|
|
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.
Semantic patch information:
Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file()
imposes some significant overhead as compared to
DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe().
Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add 1472-byte test to tcrypt for IPsec
- Reintroduced crypto stats interface with numerous changes
- Support incremental algorithm dumps
Algorithms:
- Add xchacha12/20
- Add nhpoly1305
- Add adiantum
- Add streebog hash
- Mark cts(cbc(aes)) as FIPS allowed
Drivers:
- Improve performance of arm64/chacha20
- Improve performance of x86/chacha20
- Add NEON-accelerated nhpoly1305
- Add SSE2 accelerated nhpoly1305
- Add AVX2 accelerated nhpoly1305
- Add support for 192/256-bit keys in gcmaes AVX
- Add SG support in gcmaes AVX
- ESN for inline IPsec tx in chcr
- Add support for CryptoCell 703 in ccree
- Add support for CryptoCell 713 in ccree
- Add SM4 support in ccree
- Add SM3 support in ccree
- Add support for chacha20 in caam/qi2
- Add support for chacha20 + poly1305 in caam/jr
- Add support for chacha20 + poly1305 in caam/qi2
- Add AEAD cipher support in cavium/nitrox"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits)
crypto: skcipher - remove remnants of internal IV generators
crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS
crypto: salsa20-generic - don't unnecessarily use atomic walk
crypto: skcipher - add might_sleep() to skcipher_walk_virt()
crypto: x86/chacha - avoid sleeping under kernel_fpu_begin()
crypto: cavium/nitrox - Added AEAD cipher support
crypto: mxc-scc - fix build warnings on ARM64
crypto: api - document missing stats member
crypto: user - remove unused dump functions
crypto: chelsio - Fix wrong error counter increments
crypto: chelsio - Reset counters on cxgb4 Detach
crypto: chelsio - Handle PCI shutdown event
crypto: chelsio - cleanup:send addr as value in function argument
crypto: chelsio - Use same value for both channel in single WR
crypto: chelsio - Swap location of AAD and IV sent in WR
crypto: chelsio - remove set but not used variable 'kctx_len'
crypto: ux500 - Use proper enum in hash_set_dma_transfer
crypto: ux500 - Use proper enum in cryp_set_dma_transfer
crypto: aesni - Add scatter/gather avx stubs, and use them in C
crypto: aesni - Introduce partial block macro
..
|
|
In case a command which completes in Command Status was sent using the
hci_cmd_send-family of APIs there would be a misleading error in the
hci_get_cmd_complete function, since the code would be trying to fetch
the Command Complete parameters when there are none.
Avoid the misleading error and silently bail out from the function in
case the received event is a command status.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Trivial fix to clean up an indentation issue
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
In order to pass extack together with NETDEV_PRE_UP notifications, it's
necessary to route the extack to __dev_open() from diverse (possibly
indirect) callers. One prominent API through which the notification is
invoked is dev_open().
Therefore extend dev_open() with and extra extack argument and update
all users. Most of the calls end up just encoding NULL, but bond and
team drivers have the extack readily available.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'shash' algorithms are always synchronous, so passing CRYPTO_ALG_ASYNC
in the mask to crypto_alloc_shash() has no effect. Many users therefore
already don't pass it, but some still do. This inconsistency can cause
confusion, especially since the way the 'mask' argument works is
somewhat counterintuitive.
Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
'cipher' algorithms (single block ciphers) are always synchronous, so
passing CRYPTO_ALG_ASYNC in the mask to crypto_alloc_cipher() has no
effect. Many users therefore already don't pass it, but some still do.
This inconsistency can cause confusion, especially since the way the
'mask' argument works is somewhat counterintuitive.
Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull AFS updates from Al Viro:
"AFS series, with some iov_iter bits included"
* 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
missing bits of "iov_iter: Separate type from direction and use accessor functions"
afs: Probe multiple fileservers simultaneously
afs: Fix callback handling
afs: Eliminate the address pointer from the address list cursor
afs: Allow dumping of server cursor on operation failure
afs: Implement YFS support in the fs client
afs: Expand data structure fields to support YFS
afs: Get the target vnode in afs_rmdir() and get a callback on it
afs: Calc callback expiry in op reply delivery
afs: Fix FS.FetchStatus delivery from updating wrong vnode
afs: Implement the YFS cache manager service
afs: Remove callback details from afs_callback_break struct
afs: Commit the status on a new file/dir/symlink
afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS
afs: Don't invoke the server to read data beyond EOF
afs: Add a couple of tracepoints to log I/O errors
afs: Handle EIO from delivery function
afs: Fix TTL on VL server and address lists
afs: Implement VL server rotation
afs: Improve FS server rotation error handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull compat_ioctl fixes from Al Viro:
"A bunch of compat_ioctl fixes, mostly in bluetooth.
Hopefully, most of fs/compat_ioctl.c will get killed off over the next
few cycles; between this, tty series already merged and Arnd's work
this cycle ought to take a good chunk out of the damn thing..."
* 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
hidp: fix compat_ioctl
hidp: constify hidp_connection_add()
cmtp: fix compat_ioctl
bnep: fix compat_ioctl
compat_ioctl: trim the pointless includes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull tty ioctl updates from Al Viro:
"This is the compat_ioctl work related to tty ioctls.
Quite a bit of dead code taken out, all tty-related stuff gone from
fs/compat_ioctl.c. A bunch of compat bugs fixed - some still remain,
but all more or less generic tty-related ioctls should be covered
(remaining issues are in things like driver-private ioctls in a pcmcia
serial card driver not getting properly handled in 32bit processes on
64bit host, etc)"
* 'work.tty-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (53 commits)
kill TIOCSERGSTRUCT
change semantics of ldisc ->compat_ioctl()
kill TIOCSER[SG]WILD
synclink_gt(): fix compat_ioctl()
pty: fix compat ioctls
compat_ioctl - kill keyboard ioctl handling
gigaset: add ->compat_ioctl()
vt_compat_ioctl(): clean up, use compat_ptr() properly
gigaset: don't try to printk userland buffer contents
dgnc: don't bother with (empty) stub for TCXONC
dgnc: leave TIOC[GS]SOFTCAR to ldisc
remove fallback to drivers for TIOCGICOUNT
dgnc: break-related ioctls won't reach ->ioctl()
kill the rest of tty COMPAT_IOCTL() entries
dgnc: TIOCM... won't reach ->ioctl()
isdn_tty: TCSBRK{,P} won't reach ->ioctl()
kill capinc_tty_ioctl()
take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()
synclink: reduce pointless checks in ->ioctl()
complete ->[sg]et_serial() switchover
...
|
|
In the iov_iter struct, separate the iterator type from the iterator
direction and use accessor functions to access them in most places.
Convert a bunch of places to use switch-statements to access them rather
then chains of bitwise-AND statements. This makes it easier to add further
iterator types. Also, this can be more efficient as to implement a switch
of small contiguous integers, the compiler can use ~50% fewer compare
instructions than it has to use bitwise-and instructions.
Further, cease passing the iterator type into the iterator setup function.
The iterator function can set that itself. Only the direction is required.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The check on status is redundant as a status has to be zero at
the point it is being checked because of a previous check and return
path via label 'unlock'. Remove the redundant check and the deadcode
that can never be reached.
Detected by CoverityScan, CID#1471710 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
L2CAP: New result values
0x0006 - Connection refused – Invalid Source CID
0x0007 - Connection refused – Source CID already allocated
As per the ESR08_V1.0.0, 1.11.2 Erratum 3253, Page No. 54,
"Remote CID invalid Issue".
Applies to Core Specification versions: V5.0, V4.2, v4.1, v4.0, and v3.0 + HS
Vol 3, Part A, Section 4.2, 4.3, 4.14, 4.15.
Core Specification Version 5.0, Page No.1753, Table 4.6 and
Page No. 1767, Table 4.14
New result values are added to l2cap connect/create channel response as
0x0006 - Connection refused – Invalid Source CID
0x0007 - Connection refused – Source CID already allocated
Signed-off-by: Mallikarjun Phulari <mallikarjun.phulari@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Add the result values specific to L2CAP LE credit based connections
and change the old result values wherever they were used.
Signed-off-by: Mallikarjun Phulari <mallikarjun.phulari@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Once upon a time a bunch of serial drivers used to provide that;
today it's only amiserial and it's FUBAR - the structure being
copied to userland includes kernel pointers, fields with
config-dependent size, etc. No userland code using it could
possibly survive - e.g. enabling lockdep definitely changes the
layout. Besides, it's a massive infoleak.
Kill it. If somebody needs that data for debugging purposes, they
can bloody well expose it saner ways. Assuming anyone does debugging
of amiserial in the first place, that is.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
no support there
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net'
overlapped the renaming of a netlink attribute in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix crash caused by NULL pointer dereference when debugfs functions
le_max_key_read, le_max_key_size_write, le_min_key_size_read or
le_min_key_size_write and Bluetooth adapter was powered off.
Fix is to move max_key_size and min_key_size from smp_dev to hci_dev.
At the same time they were renamed to le_max_key_size and
le_min_key_size.
BUG: unable to handle kernel NULL pointer dereference at 00000000000002e8
PGD 0 P4D 0
Oops: 0000 [#24] SMP PTI
CPU: 2 PID: 6255 Comm: cat Tainted: G D OE 4.18.9-200.fc28.x86_64 #1
Hardware name: LENOVO 4286CTO/4286CTO, BIOS 8DET76WW (1.46 ) 06/21/2018
RIP: 0010:le_max_key_size_read+0x45/0xb0 [bluetooth]
Code: 00 00 00 48 83 ec 10 65 48 8b 04 25 28 00 00 00 48 89 44 24 08 31 c0 48 8b 87 c8 00 00 00 48 8d 7c 24 04 48 8b 80 48 0a 00 00 <48> 8b 80 e8 02 00 00 0f b6 48 52 e8 fb b6 b3 ed be 04 00 00 00 48
RSP: 0018:ffffab23c3ff3df0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00007f0b4ca2e000 RCX: ffffab23c3ff3f08
RDX: ffffffffc0ddb033 RSI: 0000000000000004 RDI: ffffab23c3ff3df4
RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffab23c3ff3ed8 R11: 0000000000000000 R12: ffffab23c3ff3f08
R13: 00007f0b4ca2e000 R14: 0000000000020000 R15: ffffab23c3ff3f08
FS: 00007f0b4ca0f540(0000) GS:ffff91bd5e280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000002e8 CR3: 00000000629fa006 CR4: 00000000000606e0
Call Trace:
full_proxy_read+0x53/0x80
__vfs_read+0x36/0x180
vfs_read+0x8a/0x140
ksys_read+0x4f/0xb0
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
If the remote is not able to fully utilize the MPS choosen recalculate
the credits based on the actual amount it is sending that way it can
still send packets of MTU size without credits dropping to 0.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Give enough rx credits for a full packet instead of using an arbitrary
number which may not be enough depending on the MTU and MPS which can
cause interruptions while waiting for more credits, also remove
debugfs entry for l2cap_le_max_credits.
With these changes the credits are restored after each SDU is received
instead of using fixed threshold, this way it is garanteed that there
will always be enough credits to send a packet without waiting more
credits to arrive.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This ensures the MPS can fit in a single HCI fragment so each
segment don't have to be reassembled at HCI level, in addition to
that also remove the debugfs entry to configure the MPS.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Add the definitions for adding entries to the LE resolve list and
removing entries from the LE resolve list. When the LE resolve list
gets changed via HCI commands make sure that the internal storage of
the resolve list entries gets updated.
Signed-off-by: Ankit Navik <ankit.p.navik@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The barriers are unneeded; wait_woken() and woken_wake_function()
already provide us with the required synchronization: remove them
and document that we're relying on the (implicit) synchronization
provided by wait_woken() and woken_wake_function().
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
In case unpair_device() was called through mgmt interface at the same time
when pairing was in progress, Bluetooth kernel module crash was seen.
[ 600.351225] general protection fault: 0000 [#1] SMP PTI
[ 600.351235] CPU: 1 PID: 11096 Comm: btmgmt Tainted: G OE 4.19.0-rc1+ #1
[ 600.351238] Hardware name: Dell Inc. Latitude E5440/08RCYC, BIOS A18 05/14/2017
[ 600.351272] RIP: 0010:smp_chan_destroy.isra.10+0xce/0x2c0 [bluetooth]
[ 600.351276] Code: c0 0f 84 b4 01 00 00 80 78 28 04 0f 84 53 01 00 00 4d 85 ed 0f 85 ab 00 00 00 48 8b 08 48 8b 50 08 be 10 00 00 00 48 89 51 08 <48> 89 0a 48 b9 00 02 00 00 00 00 ad de 48 89 48 08 48 8b 83 00 01
[ 600.351279] RSP: 0018:ffffa9be839b3b50 EFLAGS: 00010246
[ 600.351282] RAX: ffff9c999ac565a0 RBX: ffff9c9996e98c00 RCX: ffff9c999aa28b60
[ 600.351285] RDX: dead000000000200 RSI: 0000000000000010 RDI: ffff9c999e403500
[ 600.351287] RBP: ffffa9be839b3b70 R08: 0000000000000000 R09: ffffffff92a25c00
[ 600.351290] R10: ffffa9be839b3ae8 R11: 0000000000000001 R12: ffff9c995375b800
[ 600.351292] R13: 0000000000000000 R14: ffff9c99619a5000 R15: ffff9c9962a01c00
[ 600.351295] FS: 00007fb2be27c700(0000) GS:ffff9c999e880000(0000) knlGS:0000000000000000
[ 600.351298] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 600.351300] CR2: 00007fb2bdadbad0 CR3: 000000041c328001 CR4: 00000000001606e0
[ 600.351302] Call Trace:
[ 600.351325] smp_failure+0x4f/0x70 [bluetooth]
[ 600.351345] smp_cancel_pairing+0x74/0x80 [bluetooth]
[ 600.351370] unpair_device+0x1c1/0x330 [bluetooth]
[ 600.351399] hci_sock_sendmsg+0x960/0x9f0 [bluetooth]
[ 600.351409] ? apparmor_socket_sendmsg+0x1e/0x20
[ 600.351417] sock_sendmsg+0x3e/0x50
[ 600.351422] sock_write_iter+0x85/0xf0
[ 600.351429] do_iter_readv_writev+0x12b/0x1b0
[ 600.351434] do_iter_write+0x87/0x1a0
[ 600.351439] vfs_writev+0x98/0x110
[ 600.351443] ? ep_poll+0x16d/0x3d0
[ 600.351447] ? ep_modify+0x73/0x170
[ 600.351451] do_writev+0x61/0xf0
[ 600.351455] ? do_writev+0x61/0xf0
[ 600.351460] __x64_sys_writev+0x1c/0x20
[ 600.351465] do_syscall_64+0x5a/0x110
[ 600.351471] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 600.351474] RIP: 0033:0x7fb2bdb62fe0
[ 600.351477] Code: 73 01 c3 48 8b 0d b8 6e 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 69 c7 2c 00 00 75 10 b8 14 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 de 80 01 00 48 89 04 24
[ 600.351479] RSP: 002b:00007ffe062cb8f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
[ 600.351484] RAX: ffffffffffffffda RBX: 000000000255b3d0 RCX: 00007fb2bdb62fe0
[ 600.351487] RDX: 0000000000000001 RSI: 00007ffe062cb920 RDI: 0000000000000004
[ 600.351490] RBP: 00007ffe062cb920 R08: 000000000255bd80 R09: 0000000000000000
[ 600.351494] R10: 0000000000000353 R11: 0000000000000246 R12: 0000000000000001
[ 600.351497] R13: 00007ffe062cbbe0 R14: 0000000000000000 R15: 0000000000000000
[ 600.351501] Modules linked in: algif_hash algif_skcipher af_alg cmac ipt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo iptable_nat nf_nat_ipv4 xt_addrtype iptable_filter ip_tables xt_conntrack x_tables nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c br_netfilter bridge stp llc overlay arc4 nls_iso8859_1 dm_crypt intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp dell_laptop kvm_intel crct10dif_pclmul dell_smm_hwmon crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper intel_cstate intel_rapl_perf uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev media hid_multitouch input_leds joydev serio_raw dell_wmi snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic dell_smbios dcdbas sparse_keymap
[ 600.351569] snd_hda_intel btusb snd_hda_codec btrtl btbcm btintel snd_hda_core bluetooth(OE) snd_hwdep snd_pcm iwlmvm ecdh_generic wmi_bmof dell_wmi_descriptor snd_seq_midi mac80211 snd_seq_midi_event lpc_ich iwlwifi snd_rawmidi snd_seq snd_seq_device snd_timer cfg80211 snd soundcore mei_me mei dell_rbtn dell_smo8800 mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid hid i915 nouveau kvmgt vfio_mdev mdev vfio_iommu_type1 vfio kvm irqbypass i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt mxm_wmi psmouse ahci sdhci_pci cqhci libahci fb_sys_fops sdhci drm e1000e video wmi
[ 600.351637] ---[ end trace e49e9f1df09c94fb ]---
[ 600.351664] RIP: 0010:smp_chan_destroy.isra.10+0xce/0x2c0 [bluetooth]
[ 600.351666] Code: c0 0f 84 b4 01 00 00 80 78 28 04 0f 84 53 01 00 00 4d 85 ed 0f 85 ab 00 00 00 48 8b 08 48 8b 50 08 be 10 00 00 00 48 89 51 08 <48> 89 0a 48 b9 00 02 00 00 00 00 ad de 48 89 48 08 48 8b 83 00 01
[ 600.351669] RSP: 0018:ffffa9be839b3b50 EFLAGS: 00010246
[ 600.351672] RAX: ffff9c999ac565a0 RBX: ffff9c9996e98c00 RCX: ffff9c999aa28b60
[ 600.351674] RDX: dead000000000200 RSI: 0000000000000010 RDI: ffff9c999e403500
[ 600.351676] RBP: ffffa9be839b3b70 R08: 0000000000000000 R09: ffffffff92a25c00
[ 600.351679] R10: ffffa9be839b3ae8 R11: 0000000000000001 R12: ffff9c995375b800
[ 600.351681] R13: 0000000000000000 R14: ffff9c99619a5000 R15: ffff9c9962a01c00
[ 600.351684] FS: 00007fb2be27c700(0000) GS:ffff9c999e880000(0000) knlGS:0000000000000000
[ 600.351686] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 600.351689] CR2: 00007fb2bdadbad0 CR3: 000000041c328001 CR4: 00000000001606e0
Crash happened because list_del_rcu() was called twice for smp->ltk. This
was possible if unpair_device was called right after ltk was generated
but before keys were distributed.
In this commit smp_cancel_pairing was refactored to cancel pairing if it
is in progress and otherwise just removes keys. Once keys are removed from
rcu list, pointers to smp context's keys are set to NULL to make sure
removed list items are not accessed later.
This commit also adjusts the functionality of mgmt unpair_device() little
bit. Previously pairing was canceled only if pairing was in state that
keys were already generated. With this commit unpair_device() cancels
pairing already in earlier states.
Bug was found by fuzzing kernel SMP implementation using Synopsys
Defensics.
Reported-by: Pekka Oikarainen <pekka.oikarainen@synopsys.com>
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
In case local OOB data was generated and other device initiated pairing
claiming that it has got OOB data, following crash occurred:
[ 222.847853] general protection fault: 0000 [#1] SMP PTI
[ 222.848025] CPU: 1 PID: 42 Comm: kworker/u5:0 Tainted: G C 4.18.0-custom #4
[ 222.848158] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 222.848307] Workqueue: hci0 hci_rx_work [bluetooth]
[ 222.848416] RIP: 0010:compute_ecdh_secret+0x5a/0x270 [bluetooth]
[ 222.848540] Code: 0c af f5 48 8b 3d 46 de f0 f6 ba 40 00 00 00 be c0 00 60 00 e8 b7 7b c5 f5 48 85 c0 0f 84 ea 01 00 00 48 89 c3 e8 16 0c af f5 <49> 8b 47 38 be c0 00 60 00 8b 78 f8 48 83 c7 48 e8 51 84 c5 f5 48
[ 222.848914] RSP: 0018:ffffb1664087fbc0 EFLAGS: 00010293
[ 222.849021] RAX: ffff8a5750d7dc00 RBX: ffff8a5671096780 RCX: ffffffffc08bc32a
[ 222.849111] RDX: 0000000000000000 RSI: 00000000006000c0 RDI: ffff8a5752003800
[ 222.849192] RBP: ffffb1664087fc60 R08: ffff8a57525280a0 R09: ffff8a5752003800
[ 222.849269] R10: ffffb1664087fc70 R11: 0000000000000093 R12: ffff8a5674396e00
[ 222.849350] R13: ffff8a574c2e79aa R14: ffff8a574c2e796a R15: 020e0e100d010101
[ 222.849429] FS: 0000000000000000(0000) GS:ffff8a5752500000(0000) knlGS:0000000000000000
[ 222.849518] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 222.849586] CR2: 000055856016a038 CR3: 0000000110d2c005 CR4: 00000000000606e0
[ 222.849671] Call Trace:
[ 222.849745] ? sc_send_public_key+0x110/0x2a0 [bluetooth]
[ 222.849825] ? sc_send_public_key+0x115/0x2a0 [bluetooth]
[ 222.849925] smp_recv_cb+0x959/0x2490 [bluetooth]
[ 222.850023] ? _cond_resched+0x19/0x40
[ 222.850105] ? mutex_lock+0x12/0x40
[ 222.850202] l2cap_recv_frame+0x109d/0x3420 [bluetooth]
[ 222.850315] ? l2cap_recv_frame+0x109d/0x3420 [bluetooth]
[ 222.850426] ? __switch_to_asm+0x34/0x70
[ 222.850515] ? __switch_to_asm+0x40/0x70
[ 222.850625] ? __switch_to_asm+0x34/0x70
[ 222.850724] ? __switch_to_asm+0x40/0x70
[ 222.850786] ? __switch_to_asm+0x34/0x70
[ 222.850846] ? __switch_to_asm+0x40/0x70
[ 222.852581] ? __switch_to_asm+0x34/0x70
[ 222.854976] ? __switch_to_asm+0x40/0x70
[ 222.857475] ? __switch_to_asm+0x40/0x70
[ 222.859775] ? __switch_to_asm+0x34/0x70
[ 222.861218] ? __switch_to_asm+0x40/0x70
[ 222.862327] ? __switch_to_asm+0x34/0x70
[ 222.863758] l2cap_recv_acldata+0x266/0x3c0 [bluetooth]
[ 222.865122] hci_rx_work+0x1c9/0x430 [bluetooth]
[ 222.867144] process_one_work+0x210/0x4c0
[ 222.868248] worker_thread+0x41/0x4d0
[ 222.869420] kthread+0x141/0x160
[ 222.870694] ? process_one_work+0x4c0/0x4c0
[ 222.871668] ? kthread_create_worker_on_cpu+0x90/0x90
[ 222.872896] ret_from_fork+0x35/0x40
[ 222.874132] Modules linked in: algif_hash algif_skcipher af_alg rfcomm bnep btusb btrtl btbcm btintel snd_intel8x0 cmac intel_rapl_perf vboxvideo(C) snd_ac97_codec bluetooth ac97_bus joydev ttm snd_pcm ecdh_generic drm_kms_helper snd_timer snd input_leds drm serio_raw fb_sys_fops soundcore syscopyarea sysfillrect sysimgblt mac_hid sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ahci psmouse libahci i2c_piix4 video e1000 pata_acpi
[ 222.883153] fbcon_switch: detected unhandled fb_set_par error, error code -16
[ 222.886774] fbcon_switch: detected unhandled fb_set_par error, error code -16
[ 222.890503] ---[ end trace 6504aa7a777b5316 ]---
[ 222.890541] RIP: 0010:compute_ecdh_secret+0x5a/0x270 [bluetooth]
[ 222.890551] Code: 0c af f5 48 8b 3d 46 de f0 f6 ba 40 00 00 00 be c0 00 60 00 e8 b7 7b c5 f5 48 85 c0 0f 84 ea 01 00 00 48 89 c3 e8 16 0c af f5 <49> 8b 47 38 be c0 00 60 00 8b 78 f8 48 83 c7 48 e8 51 84 c5 f5 48
[ 222.890555] RSP: 0018:ffffb1664087fbc0 EFLAGS: 00010293
[ 222.890561] RAX: ffff8a5750d7dc00 RBX: ffff8a5671096780 RCX: ffffffffc08bc32a
[ 222.890565] RDX: 0000000000000000 RSI: 00000000006000c0 RDI: ffff8a5752003800
[ 222.890571] RBP: ffffb1664087fc60 R08: ffff8a57525280a0 R09: ffff8a5752003800
[ 222.890576] R10: ffffb1664087fc70 R11: 0000000000000093 R12: ffff8a5674396e00
[ 222.890581] R13: ffff8a574c2e79aa R14: ffff8a574c2e796a R15: 020e0e100d010101
[ 222.890586] FS: 0000000000000000(0000) GS:ffff8a5752500000(0000) knlGS:0000000000000000
[ 222.890591] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 222.890594] CR2: 000055856016a038 CR3: 0000000110d2c005 CR4: 00000000000606e0
This commit fixes a bug where invalid pointer to crypto tfm was used for
SMP SC ECDH calculation when OOB was in use. Solution is to use same
crypto tfm than when generating OOB material on generate_oob() function.
This bug was introduced in commit c0153b0b901a ("Bluetooth: let the crypto
subsystem generate the ecc privkey"). Bug was found by fuzzing kernel SMP
implementation using Synopsys Defensics.
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
A remote device may claim that it has received our OOB data, even
though we never geneated it. Add a new flag to track whether we
actually have OOB data, and ignore the remote peer's flag if haven't
generated OOB data.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
1) no point putting it into fs/compat_ioctl.c when you handle it in
your ->compat_ioctl() anyway.
2) HIDPCONNADD is *not* COMPATIBLE_IOCTL() stuff at all - it does
layout massage (pointer-chasing there)
3) use compat_ptr()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Use compat_ptr(). And don't mess with fs/compat_ioctl.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
use compat_ptr() properly and don't bother with fs/compat_ioctl.c -
it's all handled in ->compat_ioctl() anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull networking updates from David Miller:
"Highlights:
- Gustavo A. R. Silva keeps working on the implicit switch fallthru
changes.
- Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
Luca Coelho.
- Re-enable ASPM in r8169, from Kai-Heng Feng.
- Add virtual XFRM interfaces, which avoids all of the limitations of
existing IPSEC tunnels. From Steffen Klassert.
- Convert GRO over to use a hash table, so that when we have many
flows active we don't traverse a long list during accumluation.
- Many new self tests for routing, TC, tunnels, etc. Too many
contributors to mention them all, but I'm really happy to keep
seeing this stuff.
- Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.
- Lots of cleanups and fixes in L2TP code from Guillaume Nault.
- Add IPSEC offload support to netdevsim, from Shannon Nelson.
- Add support for slotting with non-uniform distribution to netem
packet scheduler, from Yousuk Seung.
- Add UDP GSO support to mlx5e, from Boris Pismenny.
- Support offloading of Team LAG in NFP, from John Hurley.
- Allow to configure TX queue selection based upon RX queue, from
Amritha Nambiar.
- Support ethtool ring size configuration in aquantia, from Anton
Mikaev.
- Support DSCP and flowlabel per-transport in SCTP, from Xin Long.
- Support list based batching and stack traversal of SKBs, this is
very exciting work. From Edward Cree.
- Busyloop optimizations in vhost_net, from Toshiaki Makita.
- Introduce the ETF qdisc, which allows time based transmissions. IGB
can offload this in hardware. From Vinicius Costa Gomes.
- Add parameter support to devlink, from Moshe Shemesh.
- Several multiplication and division optimizations for BPF JIT in
nfp driver, from Jiong Wang.
- Lots of prepatory work to make more of the packet scheduler layer
lockless, when possible, from Vlad Buslov.
- Add ACK filter and NAT awareness to sch_cake packet scheduler, from
Toke Høiland-Jørgensen.
- Support regions and region snapshots in devlink, from Alex Vesker.
- Allow to attach XDP programs to both HW and SW at the same time on
a given device, with initial support in nfp. From Jakub Kicinski.
- Add TLS RX offload and support in mlx5, from Ilya Lesokhin.
- Use PHYLIB in r8169 driver, from Heiner Kallweit.
- All sorts of changes to support Spectrum 2 in mlxsw driver, from
Ido Schimmel.
- PTP support in mv88e6xxx DSA driver, from Andrew Lunn.
- Make TCP_USER_TIMEOUT socket option more accurate, from Jon
Maxwell.
- Support for templates in packet scheduler classifier, from Jiri
Pirko.
- IPV6 support in RDS, from Ka-Cheong Poon.
- Native tproxy support in nf_tables, from Máté Eckl.
- Maintain IP fragment queue in an rbtree, but optimize properly for
in-order frags. From Peter Oskolkov.
- Improvde handling of ACKs on hole repairs, from Yuchung Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
hv/netvsc: Fix NULL dereference at single queue mode fallback
net: filter: mark expected switch fall-through
xen-netfront: fix warn message as irq device name has '/'
cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
net: dsa: mv88e6xxx: missing unlock on error path
rds: fix building with IPV6=m
inet/connection_sock: prefer _THIS_IP_ to current_text_addr
net: dsa: mv88e6xxx: bitwise vs logical bug
net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
ieee802154: hwsim: using right kind of iteration
net: hns3: Add vlan filter setting by ethtool command -K
net: hns3: Set tx ring' tc info when netdev is up
net: hns3: Remove tx ring BD len register in hns3_enet
net: hns3: Fix desc num set to default when setting channel
net: hns3: Fix for phy link issue when using marvell phy driver
net: hns3: Fix for information of phydev lost problem when down/up
net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
net: hns3: Add support for serdes loopback selftest
bnxt_en: take coredump_record structure off stack
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"LED triggers improvements make the biggest part of this pull request.
The most striking ones, that allowed for nice cleanups in the triggers
are:
- centralized handling of creation and removal of trigger sysfs
attributes via attribute group
- addition of module_led_trigger() helper
The other things that need to be mentioned:
New features and improvements to existing LED class drivers:
- lt3593: add DT support, switch to gpiod interface
- lm3692x: support LED sync configuration, change OF calls to fwnode
calls
- apu: modify PC Engines apu/apu2 driver to support apu3
Change in the drivers/net/can/led.c:
- mark led trigger as broken since it's in the way for the further
cleanups. It implements a subset of the netdev trigger and an Ack
is needed from someone who can actually test and confirm that the
netdev trigger works for can devices"
* tag 'leds-for-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (32 commits)
leds: ns2: Change unsigned to unsigned int
usb: simplify usbport trigger
leds: gpio trigger: simplifications from core changes
leds: backlight trigger: simplifications from core changes
leds: activity trigger: simplifications from core changes
leds: default-on trigger: make use of module_led_trigger()
leds: heartbeat trigger: simplifications from core changes
leds: oneshot trigger: simplifications from core changes
leds: transient trigger: simplifications from core changes
leds: timer trigger: simplifications from core changes
leds: netdev trigger: simplifications from core changes
leds: triggers: new function led_set_trigger_data()
leds: triggers: define module_led_trigger helper
leds: triggers: handle .trigger_data and .activated() in the core
leds: triggers: add device attribute support
leds: triggers: let struct led_trigger::activate() return an error code
leds: triggers: make the MODULE_LICENSE string match the actual license
leds: lm3692x: Support LED sync configuration
dt: bindings: lm3692x: Update binding for LED sync control
leds: lm3692x: Change DT calls to fwnode calls
...
|
|
Add the definitions for LE address resolution enable HCI commands.
When the LE address resolution enable gets changed via HCI commands
make sure that flag gets updated.
Signed-off-by: Ankit Navik <ankit.p.navik@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Variables 'adv_set' and 'cp' are being assigned but are never used hence
they are redundant and can be removed.
Cleans up clang warnings:
net/bluetooth/hci_event.c:1135:29: warning: variable 'adv_set' set but not used [-Wunused-but-set-variable]
net/bluetooth/mgmt.c:3359:39: warning: variable 'cp' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
CVE-2018-9363
The buffer length is unsigned at all layers, but gets cast to int and
checked in hidp_process_report and can lead to a buffer overflow.
Switch len parameter to unsigned int to resolve issue.
This affects 3.18 and newer kernels.
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Fixes: a4b1b5877b514b276f0f31efe02388a9c2836728 ("HID: Bluetooth: hidp: make sure input buffers are big enough")
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: security@kernel.org
Cc: kernel-team@android.com
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
