| Age | Commit message (Collapse) | Author |
|---|
|
Pull block updates from Jens Axboe:
"Pretty quiet round for this release. This contains:
- Add support for zoned storage to ublk (Andreas, Ming)
- Series improving performance for drivers that mark themselves as
needing a blocking context for issue (Bart)
- Cleanup the flush logic (Chengming)
- sed opal keyring support (Greg)
- Fixes and improvements to the integrity support (Jinyoung)
- Add some exports for bcachefs that we can hopefully delete again in
the future (Kent)
- deadline throttling fix (Zhiguo)
- Series allowing building the kernel without buffer_head support
(Christoph)
- Sanitize the bio page adding flow (Christoph)
- Write back cache fixes (Christoph)
- MD updates via Song:
- Fix perf regression for raid0 large sequential writes (Jan)
- Fix split bio iostat for raid0 (David)
- Various raid1 fixes (Heinz, Xueshi)
- raid6test build fixes (WANG)
- Deprecate bitmap file support (Christoph)
- Fix deadlock with md sync thread (Yu)
- Refactor md io accounting (Yu)
- Various non-urgent fixes (Li, Yu, Jack)
- Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li,
Ming, Nitesh, Ruan, Tejun, Thomas, Xu)"
* tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits)
block: use strscpy() to instead of strncpy()
block: sed-opal: keyring support for SED keys
block: sed-opal: Implement IOC_OPAL_REVERT_LSP
block: sed-opal: Implement IOC_OPAL_DISCOVERY
blk-mq: prealloc tags when increase tagset nr_hw_queues
blk-mq: delete redundant tagset map update when fallback
blk-mq: fix tags leak when shrink nr_hw_queues
ublk: zoned: support REQ_OP_ZONE_RESET_ALL
md: raid0: account for split bio in iostat accounting
md/raid0: Fix performance regression for large sequential writes
md/raid0: Factor out helper for mapping and submitting a bio
md raid1: allow writebehind to work on any leg device set WriteMostly
md/raid1: hold the barrier until handle_read_error() finishes
md/raid1: free the r1bio before waiting for blocked rdev
md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io()
blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
drivers/rnbd: restore sysfs interface to rnbd-client
md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()
raid6: test: only check for Altivec if building on powerpc hosts
raid6: test: make sure all intermediate and artifact files are .gitignored
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"This happens to be a small one (due to summer I guess), and all
hardening related:
- Randomized kmalloc caches, by GONG, Ruiqi.
A new opt-in hardening feature to make heap spraying harder. It
creates multiple (16) copies of kmalloc caches, reducing the chance
of an attacker-controllable allocation site to land in the same
slab as e.g. an allocation site with use-after-free vulnerability.
The selection of the copy is derived from the allocation site
address, including a per-boot random seed.
- Stronger typing for hardened freelists in SLUB, by Jann Horn
Introduces a custom type for hardened freelist entries instead of
"void *" as those are not directly dereferencable. While reviewing
this, I've noticed opportunities for further cleanups in that code
and added those on top"
* tag 'slab-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
Randomized slab caches for kmalloc()
mm/slub: remove freelist_dereference()
mm/slub: remove redundant kasan_reset_tag() from freelist_ptr calculations
mm/slub: refactor freelist to use custom type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
"PA-RISC now has a native eBPF JIT compiler for 32- and 64-bit kernels,
the LED driver was rewritten to use the Linux LED framework and most
of the parisc bootup code was switched to use *_initcall() functions.
Summary:
- add eBPF JIT compiler for 32- and 64-bit kernel
- LCD/LED driver rewrite to utilize Linux LED subsystem
- switch to generic mmap top-down layout and brk randomization
- kernel startup cleanup by loading most drivers via arch_initcall()"
* tag 'parisc-for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (31 commits)
parisc: ccio-dma: Create private runway procfs root entry
parisc: chassis: Do not overwrite string on LCD display
parisc: led: Rewrite LED/LCD driver to utilizize Linux LED subsystem
parisc: led: Fix LAN receive and transmit LEDs
parisc: lasi: Initialize LASI driver via arch_initcall()
parisc: asp: Initialize asp driver via arch_initcall()
parisc: wax: Initialize wax driver via arch_initcall()
parisc: iosapic: Convert I/O Sapic driver to use arch_initcall()
parisc: sba_iommu: Convert SBA IOMMU driver to use arch_initcall()
parisc: led: Move register_led_regions() to late_initcall()
parisc: lba: Convert LBA PCI bus driver to use arch_initcall()
parisc: gsc: Convert GSC bus driver to use arch_initcall()
parisc: ccio: Convert CCIO driver to use arch_initcall()
parisc: eisa: Convert HP EISA bus driver to use arch_initcall()
parisc: hppb: Convert HP PB bus driver to use arch_initcall()
parisc: dino: Convert dino PCI bus driver to use arch_initcall()
parisc: Makefile: Adjust order in which drivers should be loaded
parisc: led: Reduce CPU overhead for disk & lan LED computation
parisc: Avoid ioremap() for same addresss in iosapic_register()
parisc: unaligned: Simplify 32-bit assembly in emulate_std()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
|
|
Merge the new hardening feature to make heap spraying harder, by GONG,
Ruiqi. It creates multiple (16) copies of kmalloc caches, reducing the
chance of an attacker-controllable allocation site to land in the same
slab as e.g. an allocation site with use-after-free vulnerability. The
selection of the copy is derived from the allocation site address,
including a per-boot random seed.
In line with SLAB deprecation, this is a SLUB only feature, incompatible
with SLUB_TINY due to the memory overhead of the extra cache copies.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"No new features, the bulk of the changes are fixes, refactoring and
cleanups. The notable fix is the scrub performance restoration after
rewrite in 6.4, though still only partial.
Fixes:
- scrub performance drop due to rewrite in 6.4 partially restored:
- do IO grouping by blg_plug/blk_unplug again
- avoid unnecessary tree searches when processing stripes, in
extent and checksum trees
- the drop is noticeable on fast PCIe devices, -66% and restored
to -33% of the original
- backports to 6.4 planned
- handle more corner cases of transaction commit during orphan
cleanup or delayed ref processing
- use correct fsid/metadata_uuid when validating super block
- copy directory permissions and time when creating a stub subvolume
Core:
- debugging feature integrity checker deprecated, to be removed in
6.7
- in zoned mode, zones are activated just before the write, making
error handling easier, now the overcommit mechanism can be enabled
again which improves performance by avoiding more frequent flushing
- v0 extent handling completely removed, deprecated long time ago
- error handling improvements
- tests:
- extent buffer bitmap tests
- pinned extent splitting tests
- cleanups and refactoring:
- compression writeback
- extent buffer bitmap
- space flushing, ENOSPC handling"
* tag 'for-6.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (110 commits)
btrfs: zoned: skip splitting and logical rewriting on pre-alloc write
btrfs: tests: test invalid splitting when skipping pinned drop extent_map
btrfs: tests: add a test for btrfs_add_extent_mapping
btrfs: tests: add extent_map tests for dropping with odd layouts
btrfs: scrub: move write back of repaired sectors to scrub_stripe_read_repair_worker()
btrfs: scrub: don't go ordered workqueue for dev-replace
btrfs: scrub: fix grouping of read IO
btrfs: scrub: avoid unnecessary csum tree search preparing stripes
btrfs: scrub: avoid unnecessary extent tree search preparing stripes
btrfs: copy dir permission and time when creating a stub subvolume
btrfs: remove pointless empty list check when reading delayed dir indexes
btrfs: drop redundant check to use fs_devices::metadata_uuid
btrfs: compare the correct fsid/metadata_uuid in btrfs_validate_super
btrfs: use the correct superblock to compare fsid in btrfs_validate_super
btrfs: simplify memcpy either of metadata_uuid or fsid
btrfs: add a helper to read the superblock metadata_uuid
btrfs: remove v0 extent handling
btrfs: output extra debug info if we failed to find an inline backref
btrfs: move the !zoned assert into run_delalloc_cow
btrfs: consolidate the error handling in run_delalloc_nocow
...
|
|
Pull iomap updates from Darrick Wong:
"We've got some big changes for this release -- I'm very happy to be
landing willy's work to enable large folios for the page cache for
general read and write IOs when the fs can make contiguous space
allocations, and Ritesh's work to track sub-folio dirty state to
eliminate the write amplification problems inherent in using large
folios.
As a bonus, io_uring can now process write completions in the caller's
context instead of bouncing through a workqueue, which should reduce
io latency dramatically. IOWs, XFS should see a nice performance bump
for both IO paths.
Summary:
- Make large writes to the page cache fill sparse parts of the cache
with large folios, then use large memcpy calls for the large folio.
- Track the per-block dirty state of each large folio so that a
buffered write to a single byte on a large folio does not result in
a (potentially) multi-megabyte writeback IO.
- Allow some directio completions to be performed in the initiating
task's context instead of punting through a workqueue. This will
reduce latency for some io_uring requests"
* tag 'iomap-6.6-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (26 commits)
iomap: support IOCB_DIO_CALLER_COMP
io_uring/rw: add write support for IOCB_DIO_CALLER_COMP
fs: add IOCB flags related to passing back dio completions
iomap: add IOMAP_DIO_INLINE_COMP
iomap: only set iocb->private for polled bio
iomap: treat a write through cache the same as FUA
iomap: use an unsigned type for IOMAP_DIO_* defines
iomap: cleanup up iomap_dio_bio_end_io()
iomap: Add per-block dirty state tracking to improve performance
iomap: Allocate ifs in ->write_begin() early
iomap: Refactor iomap_write_delalloc_punch() function out
iomap: Use iomap_punch_t typedef
iomap: Fix possible overflow condition in iomap_write_delalloc_scan
iomap: Add some uptodate state handling helpers for ifs state bitmap
iomap: Drop ifs argument from iomap_set_range_uptodate()
iomap: Rename iomap_page to iomap_folio_state and others
iomap: Copy larger chunks from userspace
iomap: Create large folios in the buffered write path
filemap: Allow __filemap_get_folio to allocate large folios
filemap: Add fgf_t typedef
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull libfs and tmpfs updates from Christian Brauner:
"This cycle saw a lot of work for tmpfs that required changes to the
vfs layer. Andrew, Hugh, and I decided to take tmpfs through vfs this
cycle. Things will go back to mm next cycle.
Features
========
- By far the biggest work is the quota support for tmpfs. New tmpfs
quota infrastructure is added to support it and a new QFMT_SHMEM
uapi option is exposed.
This offers user and group quotas to tmpfs (project quotas will be
added later). Similar to other filesystems tmpfs quota are not
supported within user namespaces yet.
- Add support for user xattrs. While tmpfs already supports security
xattrs (security.*) and POSIX ACLs for a long time it lacked
support for user xattrs (user.*). With this pull request tmpfs will
be able to support a limited number of user xattrs.
This is accompanied by a fix (see below) to limit persistent simple
xattr allocations.
- Add support for stable directory offsets. Currently tmpfs relies on
the libfs provided cursor-based mechanism for readdir. This causes
issues when a tmpfs filesystem is exported via NFS.
NFS clients do not open directories. Instead, each server-side
readdir operation opens the directory, reads it, and then closes
it. Since the cursor state for that directory is associated with
the opened file it is discarded after each readdir operation. Such
directory offsets are not just cached by NFS clients but also
various userspace libraries based on these clients.
As it stands there is no way to invalidate the caches when
directory offsets have changed and the whole application depends on
unchanging directory offsets.
At LSFMM we discussed how to solve this problem and decided to
support stable directory offsets. libfs now allows filesystems like
tmpfs to use an xarrary to map a directory offset to a dentry. This
mechanism is currently only used by tmpfs but can be supported by
others as well.
Fixes
=====
- Change persistent simple xattrs allocations in libfs from
GFP_KERNEL to GPF_KERNEL_ACCOUNT so they're subject to memory
cgroup limits. Since this is a change to libfs it affects both
tmpfs and kernfs.
- Correctly verify {g,u}id mount options.
A new filesystem context is created via fsopen() which records the
namespace that becomes the owning namespace of the superblock when
fsconfig(FSCONFIG_CMD_CREATE) is called for filesystems that are
mountable in namespaces. However, fsconfig() calls can occur in a
namespace different from the namespace where fsopen() has been
called.
Currently, when fsconfig() is called to set {g,u}id mount options
the requested {g,u}id is mapped into a k{g,u}id according to the
namespace where fsconfig() was called from. The resulting k{g,u}id
is not guaranteed to be resolvable in the namespace of the
filesystem (the one that fsopen() was called in).
This means it's possible for an unprivileged user to create files
owned by any group in a tmpfs mount since it's possible to set the
setid bits on the tmpfs directory.
The contract for {g,u}id mount options and {g,u}id values in
general set from userspace has always been that they are translated
according to the caller's idmapping. In so far, tmpfs has been
doing the correct thing. But since tmpfs is mountable in
unprivileged contexts it is also necessary to verify that the
resulting {k,g}uid is representable in the namespace of the
superblock to avoid such bugs.
The new mount api's cross-namespace delegation abilities are
already widely used. Having talked to a bunch of userspace this is
the most faithful solution with minimal regression risks"
* tag 'v6.6-vfs.tmpfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
tmpfs,xattr: GFP_KERNEL_ACCOUNT for simple xattrs
mm: invalidation check mapping before folio_contains
tmpfs: trivial support for direct IO
tmpfs,xattr: enable limited user extended attributes
tmpfs: track free_ispace instead of free_inodes
xattr: simple_xattr_set() return old_xattr to be freed
tmpfs: verify {g,u}id mount options correctly
shmem: move spinlock into shmem_recalc_inode() to fix quota support
libfs: Remove parent dentry locking in offset_iterate_dir()
libfs: Add a lock class for the offset map's xa_lock
shmem: stable directory offsets
shmem: Refactor shmem_symlink()
libfs: Add directory operations for stable offsets
shmem: fix quota lock nesting in huge hole handling
shmem: Add default quota limit mount options
shmem: quota support
shmem: prepare shmem quota infrastructure
quota: Check presence of quota operation structures instead of ->quota_read and ->quota_write callbacks
shmem: make shmem_get_inode() return ERR_PTR instead of NULL
shmem: make shmem_inode_acct_block() return error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs timestamp updates from Christian Brauner:
"This adds VFS support for multi-grain timestamps and converts tmpfs,
xfs, ext4, and btrfs to use them. This carries acks from all relevant
filesystems.
The VFS always uses coarse-grained timestamps when updating the ctime
and mtime after a change. This has the benefit of allowing filesystems
to optimize away a lot of metadata updates, down to around 1 per
jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide to invalidate the cache.
Even with NFSv4, a lot of exported filesystems don't properly support
a change attribute and are subject to the same problems with timestamp
granularity. Other applications have similar issues with timestamps
(e.g., backup applications).
If we were to always use fine-grained timestamps, that would improve
the situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
This introduces fine-grained timestamps that are used when they are
actively queried.
This uses the 31st bit of the ctime tv_nsec field to indicate that
something has queried the inode for the mtime or ctime. When this flag
is set, on the next mtime or ctime update, the kernel will fetch a
fine-grained timestamp instead of the usual coarse-grained one.
As POSIX generally mandates that when the mtime changes, the ctime
must also change the kernel always stores normalized ctime values, so
only the first 30 bits of the tv_nsec field are ever used.
Filesytems can opt into this behavior by setting the FS_MGTIME flag in
the fstype. Filesystems that don't set this flag will continue to use
coarse-grained timestamps.
Various preparatory changes, fixes and cleanups are included:
- Fixup all relevant places where POSIX requires updating ctime
together with mtime. This is a wide-range of places and all
maintainers provided necessary Acks.
- Add new accessors for inode->i_ctime directly and change all
callers to rely on them. Plain accesses to inode->i_ctime are now
gone and it is accordingly rename to inode->__i_ctime and commented
as requiring accessors.
- Extend generic_fillattr() to pass in a request mask mirroring in a
sense the statx() uapi. This allows callers to pass in a request
mask to only get a subset of attributes filled in.
- Rework timestamp updates so it's possible to drop the @now
parameter the update_time() inode operation and associated helpers.
- Add inode_update_timestamps() and convert all filesystems to it
removing a bunch of open-coding"
* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
tmpfs: add support for multigrain timestamps
fs: add infrastructure for multigrain timestamps
fs: drop the timespec64 argument from update_time
xfs: have xfs_vn_update_time gets its own timestamp
fat: make fat_update_time get its own timestamp
fat: remove i_version handling from fat_update_time
ubifs: have ubifs_update_time use inode_update_timestamps
btrfs: have it use inode_update_timestamps
fs: drop the timespec64 arg from generic_update_time
fs: pass the request_mask to generic_fillattr
fs: remove silly warning from current_time
gfs2: fix timestamp handling on quota inodes
fs: rename i_ctime field to __i_ctime
selinux: convert to ctime accessor functions
security: convert to ctime accessor functions
apparmor: convert to ctime accessor functions
sunrpc: convert to ctime accessor functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"18 hotfixes. 13 are cc:stable and the remainder pertain to post-6.4
issues or aren't considered suitable for a -stable backport"
* tag 'mm-hotfixes-stable-2023-08-25-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
shmem: fix smaps BUG sleeping while atomic
selftests: cachestat: catch failing fsync test on tmpfs
selftests: cachestat: test for cachestat availability
maple_tree: disable mas_wr_append() when other readers are possible
madvise:madvise_free_pte_range(): don't use mapcount() against large folio for sharing check
madvise:madvise_free_huge_pmd(): don't use mapcount() against large folio for sharing check
madvise:madvise_cold_or_pageout_pte_range(): don't use mapcount() against large folio for sharing check
mm: multi-gen LRU: don't spin during memcg release
mm: memory-failure: fix unexpected return value in soft_offline_page()
radix tree: remove unused variable
mm: add a call to flush_cache_vmap() in vmap_pfn()
selftests/mm: FOLL_LONGTERM need to be updated to 0x100
nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()
mm/gup: handle cont-PTE hugetlb pages correctly in gup_must_unshare() via GUP-fast
selftests: cgroup: fix test_kmem_basic less than error
mm: enable page walking API to lock vmas during the walk
smaps: use vm_normal_page_pmd() instead of follow_trans_huge_pmd()
mm/gup: reintroduce FOLL_NUMA as FOLL_HONOR_NUMA_FAULT
|
|
The only caller already has a folio, so use it to save calling
compound_head() in PageLRU() and remove a use of page->mapping.
Link: https://lkml.kernel.org/r/20230822202335.179081-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is an exported symbol, so it should have kernel-doc. Update it to
mention folios, and point out that they might be larger than the supported
page size for this VMA.
Link: https://lkml.kernel.org/r/20230822172459.4190699-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Turn the a), b) into an unordered ReST list and remove the unnecessary
'Note:' prefix.
Link: https://lkml.kernel.org/r/20230818200630.2719595-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert the return values to an ReST list and tidy up the wording while
I'm touching it.
[akpm@linux-foundation.org: changes suggested by Randy]
[willy@infradead.org: another change suggested by Randy]
Link: https://lkml.kernel.org/r/ZOUZtZizeQG7PcsM@casper.infradead.org
Link: https://lkml.kernel.org/r/20230818200630.2719595-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Improve mm documentation".
If you build with W=1, kernel-doc complains about tlb_flush_rmaps(). Then
I ran scripts/find-unused-docs.sh against mm/ and found a large number of
files which weren't included in the ReST documentation. I fixed up a
couple of them, and added all those without erros to the rst files.
There's a lot more work to do to organise all of this, but at least now if
we have documentation that refers to these functions, we'll get a nice
link to them.
This patch (of 4):
The vma parameter wasn't described.
Link: https://lkml.kernel.org/r/20230818200630.2719595-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230818200630.2719595-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove the unnecessary encoding of page order into an enum and pass the
page order directly. That lets us get rid of pe_order().
The switch constructs have to be changed to if/else constructs to prevent
GCC from warning on builds with 3-level page tables where PMD_ORDER and
PUD_ORDER have the same value.
If you are looking at this commit because your driver stopped compiling,
look at the previous commit as well and audit your driver to be sure it
doesn't depend on mmap_lock being held in its ->huge_fault method.
[willy@infradead.org: use "order %u" to match the (non dev_t) style]
Link: https://lkml.kernel.org/r/ZOUYekbtTv+n8hYf@casper.infradead.org
Link: https://lkml.kernel.org/r/20230818202335.2739663-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove the checks for the VMA lock being held, allowing the page fault
path to call into the filesystem instead of retrying with the mmap_lock
held. This will improve scalability for DAX page faults. Also update the
documentation to match (and fix some other changes that have happened
recently).
Link: https://lkml.kernel.org/r/20230818202335.2739663-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since pte_index is always defined, we don't need to check whether it's
defined or not. Delete the slow version that doesn't depend on it and
remove the #define since nobody needs to test for it.
Link: https://lkml.kernel.org/r/20230819031837.3160096-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Christian Dietrich <stettberger@dokucode.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__mem_cgroup_uncharge_swap is only called in mem_cgroup_uncharge_swap, if
mem cgroup is disabled, __mem_cgroup_uncharge_swap cannot be called.
Therefore, there is no need to judge whether mem_cgroup is disabled or
not.
Link: https://lkml.kernel.org/r/20230819081302.1217098-1-lujialin4@huawei.com
Signed-off-by: Lu Jialin <lujialin4@huawei.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
folio
Let's work on folio->swap instead. While at it, use folio_test_anon() and
folio_test_swapcache() -- the original folio remains valid even after
splitting (but is then an order-0 folio).
We can probably convert a lot more to folios in that code, let's focus on
folio->swap handling only for now.
Link: https://lkml.kernel.org/r/20230821160849.531668-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Chris Li <chrisl@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's simply work on the folio directly and remove the helpers.
Link: https://lkml.kernel.org/r/20230821160849.531668-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Chris Li <chrisl@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/swap: stop using page->private on tail pages for THP_SWAP
+ cleanups".
This series stops using page->private on tail pages for THP_SWAP, replaces
folio->private by folio->swap for swapcache folios, and starts using
"new_folio" for tail pages that we are splitting to remove the usage of
page->private for swapcache handling completely.
This patch (of 4):
Let's stop using page->private on tail pages, making it possible to just
unconditionally reuse that field in the tail pages of large folios.
The remaining usage of the private field for THP_SWAP is in the THP
splitting code (mm/huge_memory.c), that we'll handle separately later.
Update the THP_SWAP documentation and sanity checks in mm_types.h and
__split_huge_page_tail().
[david@redhat.com: stop using page->private on tail pages for THP_SWAP]
Link: https://lkml.kernel.org/r/6f0a82a3-6948-20d9-580b-be1dbf415701@redhat.com
Link: https://lkml.kernel.org/r/20230821160849.531668-1-david@redhat.com
Link: https://lkml.kernel.org/r/20230821160849.531668-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pass the vm_fault to the architecture to help it make smarter decisions
about which PTEs to insert into the TLB.
Link: https://lkml.kernel.org/r/20230802151406.3735276-39-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Call set_pte_range() once per contiguous range of the folio instead of
once per page. This batches the updates to mm counters and the rmap.
With a will-it-scale.page_fault3 like app (change file write fault testing
to read fault testing. Trying to upstream it to will-it-scale at [1]) got
15% performance gain on a 48C/96T Cascade Lake test box with 96 processes
running against xfs.
Perf data collected before/after the change:
18.73%--page_add_file_rmap
|
--11.60%--__mod_lruvec_page_state
|
|--7.40%--__mod_memcg_lruvec_state
| |
| --5.58%--cgroup_rstat_updated
|
--2.53%--__mod_lruvec_state
|
--1.48%--__mod_node_page_state
9.93%--page_add_file_rmap_range
|
--2.67%--__mod_lruvec_page_state
|
|--1.95%--__mod_memcg_lruvec_state
| |
| --1.57%--cgroup_rstat_updated
|
--0.61%--__mod_lruvec_state
|
--0.54%--__mod_node_page_state
The running time of __mode_lruvec_page_state() is reduced about 9%.
[1]: https://github.com/antonblanchard/will-it-scale/pull/37
Link: https://lkml.kernel.org/r/20230802151406.3735276-38-willy@infradead.org
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
set_pte_range() allows to setup page table entries for a specific
range. It takes advantage of batched rmap update for large folio.
It now takes care of calling update_mmu_cache_range().
Link: https://lkml.kernel.org/r/20230802151406.3735276-37-willy@infradead.org
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
folio_add_file_rmap_range() allows to add pte mapping to a specific range
of file folio. Comparing to page_add_file_rmap(), it batched updates
__lruvec_stat for large folio.
Link: https://lkml.kernel.org/r/20230802151406.3735276-36-willy@infradead.org
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
filemap_map_folio_range() maps partial/full folio. Comparing to original
filemap_map_pages(), it updates refcount once per folio instead of per
page and gets minor performance improvement for large folio.
With a will-it-scale.page_fault3 like app (change file write fault testing
to read fault testing. Trying to upstream it to will-it-scale at [1]),
got 2% performance gain on a 48C/96T Cascade Lake test box with 96
processes running against xfs.
[1]: https://github.com/antonblanchard/will-it-scale/pull/37
Link: https://lkml.kernel.org/r/20230802151406.3735276-35-willy@infradead.org
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Push the iteration over each page down to the architectures (many can
flush the entire THP without iteration).
Link: https://lkml.kernel.org/r/20230802151406.3735276-34-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Current best practice is to reuse the name of the function as a define to
indicate that the function is implemented by the architecture.
Link: https://lkml.kernel.org/r/20230802151406.3735276-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Tell the page table check how many PTEs & PFNs we want it to check.
Link: https://lkml.kernel.org/r/20230802151406.3735276-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, memcg uses rstat to maintain aggregated hierarchical stats.
Counters are maintained for hierarchical stats at each memcg. Rstat
tracks which cgroups have updates on which cpus to keep those counters
fresh on the read-side.
Non-hierarchical stats are currently not covered by rstat. Their per-cpu
counters are summed up on every read, which is expensive. The original
implementation did the same. At some point before rstat, non-hierarchical
aggregated counters were introduced by commit a983b5ebee57 ("mm:
memcontrol: fix excessive complexity in memory.stat reporting"). However,
those counters were updated on the performance critical write-side, which
caused regressions, so they were later removed by commit 815744d75152
("mm: memcontrol: don't batch updates of local VM stats and events"). See
[1] for more detailed history.
Kernel versions in between a983b5ebee57 & 815744d75152 (a year and a half)
enjoyed cheap reads of non-hierarchical stats, specifically on cgroup v1.
When moving to more recent kernels, a performance regression for reading
non-hierarchical stats is observed.
Now that we have rstat, we know exactly which percpu counters have updates
for each stat. We can maintain non-hierarchical counters again, making
reads much more efficient, without affecting the performance critical
write-side. Hence, add non-hierarchical (i.e local) counters for the
stats, and extend rstat flushing to keep those up-to-date.
A caveat is that we now need a stats flush before reading
local/non-hierarchical stats through {memcg/lruvec}_page_state_local() or
memcg_events_local(), where we previously only needed a flush to read
hierarchical stats. Most contexts reading non-hierarchical stats are
already doing a flush, add a flush to the only missing context in
count_shadow_nodes().
With this patch, reading memory.stat from 1000 memcgs is 3x faster on a
machine with 256 cpus on cgroup v1:
# for i in $(seq 1000); do mkdir /sys/fs/cgroup/memory/cg$i; done
# time cat /sys/fs/cgroup/memory/cg*/memory.stat > /dev/null
real 0m0.125s
user 0m0.005s
sys 0m0.120s
After:
real 0m0.032s
user 0m0.005s
sys 0m0.027s
To make sure there are no regressions on cgroup v2, I ran an artificial
reclaim/refault stress test [2] that creates (NR_CPUS * 2) cgroups,
assigns them limits, runs a worker process in each cgroup that allocates
tmpfs memory equal to quadruple the limit (to invoke reclaim
continuously), and then reads back the entire file (to invoke refaults).
All workers are run in parallel, and zram is used as a swapping backend.
Both reclaim and refault have conditional stats flushing. I ran this on a
machine with 112 cpus, once on mm-unstable, and once on mm-unstable with
this patch reverted.
(1) A few runs without this patch:
# time ./stress_reclaim_refault.sh
real 0m9.949s
user 0m0.496s
sys 14m44.974s
# time ./stress_reclaim_refault.sh
real 0m10.049s
user 0m0.486s
sys 14m55.791s
# time ./stress_reclaim_refault.sh
real 0m9.984s
user 0m0.481s
sys 14m53.841s
(2) A few runs with this patch:
# time ./stress_reclaim_refault.sh
real 0m9.885s
user 0m0.486s
sys 14m48.753s
# time ./stress_reclaim_refault.sh
real 0m9.903s
user 0m0.495s
sys 14m48.339s
# time ./stress_reclaim_refault.sh
real 0m9.861s
user 0m0.507s
sys 14m49.317s
No regressions are observed with this patch. There is actually a very
slight improvement. If I have to guess, maybe it's because we avoid
the percpu loop in count_shadow_nodes() when calling
lruvec_page_state_local(), but I could not prove this using perf, it's
probably in the noise.
[1] https://lore.kernel.org/lkml/20230725201811.GA1231514@cmpxchg.org/
[2] https://lore.kernel.org/lkml/CAJD7tkb17x=qwoO37uxyYXLEUVp15BQKR+Xfh7Sg9Hx-wTQ_=w@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230803185046.1385770-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20230726153223.821757-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Enable handle_userfault to operate under VMA lock by releasing VMA lock
instead of mmap_lock and retrying. Note that FAULT_FLAG_RETRY_NOWAIT
should never be used when handling faults under per-VMA lock protection
because that would break the assumption that lock is dropped on retry.
[surenb@google.com: fix a lockdep issue in vma_assert_write_locked]
Link: https://lkml.kernel.org/r/20230712195652.969194-1-surenb@google.com
Link: https://lkml.kernel.org/r/20230630211957.1341547-7-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When page fault is handled under per-VMA lock protection, all swap page
faults are retried with mmap_lock because folio_lock_or_retry has to drop
and reacquire mmap_lock if folio could not be immediately locked. Follow
the same pattern as mmap_lock to drop per-VMA lock when waiting for folio
and retrying once folio is available.
With this obstacle removed, enable do_swap_page to operate under per-VMA
lock protection. Drivers implementing ops->migrate_to_ram might still
rely on mmap_lock, therefore we have to fall back to mmap_lock in that
particular case.
Note that the only time do_swap_page calls synchronous swap_readpage is
when SWP_SYNCHRONOUS_IO is set, which is only set for
QUEUE_FLAG_SYNCHRONOUS devices: brd, zram and nvdimms (both btt and pmem).
Therefore we don't sleep in this path, and there's no need to drop the
mmap or per-VMA lock.
Link: https://lkml.kernel.org/r/20230630211957.1341547-6-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Change folio_lock_or_retry to accept vm_fault struct and return the
vm_fault_t directly.
Link: https://lkml.kernel.org/r/20230630211957.1341547-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
handle_mm_fault returning VM_FAULT_RETRY or VM_FAULT_COMPLETED means
mmap_lock has been released. However with per-VMA locks behavior is
different and the caller should still release it. To make the rules
consistent for the caller, drop the per-VMA lock when returning
VM_FAULT_RETRY or VM_FAULT_COMPLETED. Currently the only path returning
VM_FAULT_RETRY under per-VMA locks is do_swap_page and no path returns
VM_FAULT_COMPLETED for now.
[willy@infradead.org: fix riscv]
Link: https://lkml.kernel.org/r/CAJuCfpE6GWEx1rPBmNpUfoD5o-gNFz9-UFywzCE2PbEGBiVz7g@mail.gmail.com
Link: https://lkml.kernel.org/r/20230630211957.1341547-4-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Per-VMA lock support for swap and userfaults", v7.
When per-VMA locks were introduced in [1] several types of page faults
would still fall back to mmap_lock to keep the patchset simple. Among
them are swap and userfault pages. The main reason for skipping those
cases was the fact that mmap_lock could be dropped while handling these
faults and that required additional logic to be implemented. Implement
the mechanism to allow per-VMA locks to be dropped for these cases.
First, change handle_mm_fault to drop per-VMA locks when returning
VM_FAULT_RETRY or VM_FAULT_COMPLETED to be consistent with the way
mmap_lock is handled. Then change folio_lock_or_retry to accept vm_fault
and return vm_fault_t which simplifies later patches. Finally allow swap
and uffd page faults to be handled under per-VMA locks by dropping per-VMA
and retrying, the same way it's done under mmap_lock. Naturally, once VMA
lock is dropped that VMA should be assumed unstable and can't be used.
This patch (of 6):
Commit [1] introduced IO polling support duding swapin to reduce swap read
latency for block devices that can be polled. However later commit [2]
removed polling support. Therefore it seems safe to remove do_poll
parameter in read_swap_cache_async and always call swap_readpage with
synchronous=false waiting for IO completion in folio_lock_or_retry.
[1] commit 23955622ff8d ("swap: add block io poll in swapin path")
[2] commit 9650b453a3d4 ("block: ignore RWF_HIPRI hint for sync dio")
Link: https://lkml.kernel.org/r/20230630211957.1341547-1-surenb@google.com
Link: https://lkml.kernel.org/r/20230630211957.1341547-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
put_ref_page() is not called to drop extra refcnt when comes from madvise
in the case pfn is valid but pgmap is NULL leading to page refcnt leak.
Link: https://lkml.kernel.org/r/20230701072837.1994253-1-linmiaohe@huawei.com
Fixes: 1e8aaedb182d ("mm,memory_failure: always pin the page in madvise_inject_error")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix a build issue.
Link: https://lkml.kernel.org/r/ZNerqcNS4EBJA/2v@casper.infradead.org
Fixes: 4aaa60dad4d1 ("mm: allow per-VMA locks on file-backed VMAs")
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308121909.XNYBtqNI-lkp@intel.com/
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Jann Horn demonstrated how userfaultfd ioctl UFFDIO_COPY into a private
shmem mapping can add valid PTEs to page table collapse_pte_mapped_thp()
thought it had emptied: page lock on the huge page is enough to protect
against WP faults (which find the PTE has been cleared), but not enough to
protect against userfaultfd. "BUG: Bad rss-counter state" followed.
retract_page_tables() protects against this by checking !vma->anon_vma;
but we know that MADV_COLLAPSE needs to be able to work on private shmem
mappings, even those with an anon_vma prepared for another part of the
mapping; and we know that MADV_COLLAPSE needs to work on shared shmem
mappings which are userfaultfd_armed(). Whether it needs to work on
private shmem mappings which are userfaultfd_armed(), I'm not so sure: but
assume that it does.
Just for this case, take the pmd_lock() two steps earlier: not because it
gives any protection against this case itself, but because ptlock nests
inside it, and it's the dropping of ptlock which let the bug in. In other
cases, continue to minimize the pmd_lock() hold time.
Link: https://lkml.kernel.org/r/4d31abf5-56c0-9f3d-d12f-c9317936691@google.com
Fixes: 1043173eb5eb ("mm/khugepaged: collapse_pte_mapped_thp() with mmap_read_lock()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Jann Horn <jannh@google.com>
Closes: https://lore.kernel.org/linux-mm/CAG48ez0FxiRC4d3VTu_a9h=rg5FW-kYD5Rg5xo_RDBM0LTTqZQ@mail.gmail.com/
Acked-by: Peter Xu <peterx@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
hugetlb manually creates and destroys compound pages. As such it makes
assumptions about struct page layout. Commit ebc1baf5c9b4 ("mm: free up a
word in the first tail page") breaks hugetlb. The following will fix the
breakage.
Link: https://lkml.kernel.org/r/20230822231741.GC4509@monkey
Fixes: ebc1baf5c9b4 ("mm: free up a word in the first tail page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
smaps_pte_hole_lookup() is calling shmem_partial_swap_usage() with page
table lock held: but shmem_partial_swap_usage() does cond_resched_rcu() if
need_resched(): "BUG: sleeping function called from invalid context".
Since shmem_partial_swap_usage() is designed to count across a range, but
smaps_pte_hole_lookup() only calls it for a single page slot, just break
out of the loop on the last or only page, before checking need_resched().
Link: https://lkml.kernel.org/r/6fe3b3ec-abdf-332f-5c23-6a3b3a3b11a9@google.com
Fixes: 230100321518 ("mm/smaps: simplify shmem handling of pte holes")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org> [5.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
for sharing check
Commit 98b211d6415f ("madvise: convert madvise_free_pte_range() to use a
folio") replaced the page_mapcount() with folio_mapcount() to check
whether the folio is shared by other mapping.
It's not correct for large folios. folio_mapcount() returns the total
mapcount of large folio which is not suitable to detect whether the folio
is shared.
Use folio_estimated_sharers() which returns a estimated number of shares.
That means it's not 100% correct. It should be OK for madvise case here.
User-visible effects is that the THP is skipped when user call madvise.
But the correct behavior is THP should be split and processed then.
NOTE: this change is a temporary fix to reduce the user-visible effects
before the long term fix from David is ready.
Link: https://lkml.kernel.org/r/20230808020917.2230692-4-fengwei.yin@intel.com
Fixes: 98b211d6415f ("madvise: convert madvise_free_pte_range() to use a folio")
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
for sharing check
Commit fc986a38b670 ("mm: huge_memory: convert madvise_free_huge_pmd to
use a folio") replaced the page_mapcount() with folio_mapcount() to check
whether the folio is shared by other mapping.
It's not correct for large folios. folio_mapcount() returns the total
mapcount of large folio which is not suitable to detect whether the folio
is shared.
Use folio_estimated_sharers() which returns a estimated number of shares.
That means it's not 100% correct. It should be OK for madvise case here.
User-visible effects is that the THP is skipped when user call madvise.
But the correct behavior is THP should be split and processed then.
NOTE: this change is a temporary fix to reduce the user-visible effects
before the long term fix from David is ready.
Link: https://lkml.kernel.org/r/20230808020917.2230692-3-fengwei.yin@intel.com
Fixes: fc986a38b670 ("mm: huge_memory: convert madvise_free_huge_pmd to use a folio")
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
large folio for sharing check
Patch series "don't use mapcount() to check large folio sharing", v2.
In madvise_cold_or_pageout_pte_range() and madvise_free_pte_range(),
folio_mapcount() is used to check whether the folio is shared. But it's
not correct as folio_mapcount() returns total mapcount of large folio.
Use folio_estimated_sharers() here as the estimated number is enough.
This patchset will fix the cases:
User space application call madvise() with MADV_FREE, MADV_COLD and
MADV_PAGEOUT for specific address range. There are THP mapped to the
range. Without the patchset, the THP is skipped. With the patch, the
THP will be split and handled accordingly.
David reported the cow self test skip some cases because of MADV_PAGEOUT
skip THP:
https://lore.kernel.org/linux-mm/9e92e42d-488f-47db-ac9d-75b24cd0d037@intel.com/T/#mbf0f2ec7fbe45da47526de1d7036183981691e81
and I confirmed this patchset make it work again.
This patch (of 3):
Commit 07e8c82b5eff ("madvise: convert madvise_cold_or_pageout_pte_range()
to use folios") replaced the page_mapcount() with folio_mapcount() to
check whether the folio is shared by other mapping.
It's not correct for large folio. folio_mapcount() returns the total
mapcount of large folio which is not suitable to detect whether the folio
is shared.
Use folio_estimated_sharers() which returns a estimated number of shares.
That means it's not 100% correct. It should be OK for madvise case here.
User-visible effects is that the THP is skipped when user call madvise.
But the correct behavior is THP should be split and processed then.
NOTE: this change is a temporary fix to reduce the user-visible effects
before the long term fix from David is ready.
Link: https://lkml.kernel.org/r/20230808020917.2230692-1-fengwei.yin@intel.com
Link: https://lkml.kernel.org/r/20230808020917.2230692-2-fengwei.yin@intel.com
Fixes: 07e8c82b5eff ("madvise: convert madvise_cold_or_pageout_pte_range() to use folios")
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/net/inet_sock.h
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
c274af224269 ("inet: introduce inet->inet_flags")
https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/
Adjacent changes:
drivers/net/bonding/bond_alb.c
e74216b8def3 ("bonding: fix macvlan over alb bond support")
f11e5bd159b0 ("bonding: support balance-alb with openvswitch")
drivers/net/ethernet/broadcom/bgmac.c
d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()")
23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()")
drivers/net/ethernet/broadcom/genet/bcmmii.c
32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()")
acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()")
net/sctp/socket.c
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is particularly important for the userns mount case (when a sensible
nr_inodes maximum may not be enforced) that tmpfs user xattrs be subject
to memory cgroup limiting. Leave temporary buffer allocations as is,
but change the persistent simple xattr allocations from GFP_KERNEL to
GFP_KERNEL_ACCOUNT. This limits kernfs's cgroupfs too, but that's good.
(I had intended to send this change earlier, but had been confused by
shmem_alloc_inode() using GFP_KERNEL, and thought a discussion would be
needed to change that too: no, I was forgetting the SLAB_ACCOUNT on that
kmem_cache, which implicitly adds __GFP_ACCOUNT to all its allocations.)
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <f6953e5a-4183-8314-38f2-40be60998615@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
parisc uses a top-down layout by default that exactly fits the generic
functions, so get rid of arch specific code and use the generic version
by selecting ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT.
Note that on parisc the stack always grows up and a "unlimited stack"
simply means that the value as defined in CONFIG_STACK_MAX_DEFAULT_SIZE_MB
should be used. So RLIM_INFINITY is not an indicator to use the legacy
memory layout.
Signed-off-by: Helge Deller <deller@gmx.de>
|
