| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
|
If the same size kmalloc cache already exists, it should not be created
again. So there is the check for NULL kmalloc_caches before calling the
kmalloc creation function. However, new_kmalloc_cache() itself checks NULL
kmalloc_cahces before cache creation. Therefore, the NULL check is not
necessary in this function.
Signed-off-by: Hyunmin Lee <hyunminlr@gmail.com>
Co-developed-by: Jeungwoo Yoo <casionwoo@gmail.com>
Signed-off-by: Jeungwoo Yoo <casionwoo@gmail.com>
Co-developed-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Signed-off-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
For SLAB the kmalloc caches needed to be created in ascending sizes in
order. However, the constraint is not necessary anymore because SLAB has
been removed and SLUB doesn't need to comply with the constraint. Thus,
kmalloc 96 and 192 caches can be created after the other size kmalloc
caches are created instead of checking every time to find their order to
be created. Also, this change could prevent engineers from being confused
by the removed constraint.
Signed-off-by: Hyunmin Lee <hyunminlr@gmail.com>
Co-developed-by: Jeungwoo Yoo <casionwoo@gmail.com>
Signed-off-by: Jeungwoo Yoo <casionwoo@gmail.com>
Co-developed-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Signed-off-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Redefine kmalloc, krealloc, kzalloc, kcalloc, etc. to record allocations
and deallocations done by these functions.
[surenb@google.com: undo _noprof additions in the documentation]
Link: https://lkml.kernel.org/r/20240326231453.1206227-7-surenb@google.com
[rdunlap@infradead.org: fix kcalloc() kernel-doc warnings]
Link: https://lkml.kernel.org/r/20240327044649.9199-1-rdunlap@infradead.org
Link: https://lkml.kernel.org/r/20240321163705.3067592-26-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Co-developed-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The SLAB implementation has been removed since 6.8, so there is no
other version of slabinfo_show_stats() and slabinfo_write(), then we
can remove these two dummy functions.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
|
|
Merge a series from myself that replaces hardcoded SLAB_ cache flag
values with an enum, and explicitly deprecates the SLAB_MEM_SPREAD flag
that is a no-op sine SLAB removal.
|
|
For earlier kmem cache creation, slab_sysfs_init() has not been called.
Consequently, kmem_cache_destroy() cannot utilize kobj_type::release to
release the kmem_cache structure. Therefore, tweak kmem_cache_release()
to use slab_kmem_cache_release() for releasing kmem_cache when slab_state
isn't FULL. This will fixes the memory leaks like following:
unreferenced object 0xffff0000c2d87080 (size 128):
comm "swapper/0", pid 1, jiffies 4294893428
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 6b 6b 6b 6b .....N......kkkk
ff ff ff ff ff ff ff ff b8 ab 48 89 00 80 ff ff.....H.....
backtrace (crc 8819d0f6):
[<ffff80008317a298>] kmemleak_alloc+0xb0/0xc4
[<ffff8000807e553c>] kmem_cache_alloc_node+0x288/0x3a8
[<ffff8000807e95f0>] __kmem_cache_create+0x1e4/0x64c
[<ffff8000807216bc>] kmem_cache_create_usercopy+0x1c4/0x2cc
[<ffff8000807217e0>] kmem_cache_create+0x1c/0x28
[<ffff8000819f6278>] arm_v7s_alloc_pgtable+0x1c0/0x6d4
[<ffff8000819f53a0>] alloc_io_pgtable_ops+0xe8/0x2d0
[<ffff800084b2d2c4>] arm_v7s_do_selftests+0xe0/0x73c
[<ffff800080016b68>] do_one_initcall+0x11c/0x7ac
[<ffff800084a71ddc>] kernel_init_freeable+0x53c/0xbb8
[<ffff8000831728d8>] kernel_init+0x24/0x144
[<ffff800080018e98>] ret_from_fork+0x10/0x20
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The SLAB_KASAN flag prevents merging of caches in some configurations,
which is handled in a rather complicated way via kasan_never_merge().
Since we now have a generic SLAB_NO_MERGE flag, we can instead use it
for KASAN caches in addition to SLAB_KASAN in those configurations,
and simplify the SLAB_NEVER_MERGE handling.
Tested-by: Xiongwei Song <xiongwei.song@windriver.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
LLVM moved their issue tracker from their own Bugzilla instance to GitHub
issues. While all of the links are still valid, they may not necessarily
show the most up to date information around the issues, as all updates
will occur on GitHub, not Bugzilla.
Another complication is that the Bugzilla issue number is not always the
same as the GitHub issue number. Thankfully, LLVM maintains this mapping
through two shortlinks:
https://llvm.org/bz<num> -> https://bugs.llvm.org/show_bug.cgi?id=<num>
https://llvm.org/pr<num> -> https://github.com/llvm/llvm-project/issues/<mapped_num>
Switch all "https://bugs.llvm.org/show_bug.cgi?id=<num>" links to the
"https://llvm.org/pr<num>" shortlink so that the links show the most up to
date information. Each migrated issue links back to the Bugzilla entry,
so there should be no loss of fidelity of information here.
Link: https://lkml.kernel.org/r/20240109-update-llvm-links-v1-3-eb09b59db071@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Fangrui Song <maskray@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We don't use the object_size parameter in kmem_cache_flags(), so just
remove it.
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
After commit 16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"),
parameter 'flags' is only passed as 0 in create_kmalloc_caches(), and
then it is only passed to new_kmalloc_cache().
So we can change parameter 'flags' to be a local variable with
initial value 0 in new_kmalloc_cache() and remove parameter 'flags'
in create_kmalloc_caches(). Also make new_kmalloc_cache() static
due to it is only used in mm/slab_common.c.
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Since the SLAB allocator has been removed, so we can clean up the
sl[au]b_$params. With only one slab allocator left, it's better to use the
generic "slab" term instead of "slub" which is an implementation detail,
which is pointed out by Vlastimil Babka. For more information please see
[1]. Hence, we are going to use "slab_$param" as the primary prefix.
This patch is changing the following slab parameters
- slub_max_order
- slub_min_order
- slub_min_objects
- slub_debug
to
- slab_max_order
- slab_min_order
- slab_min_objects
- slab_debug
as the primary slab parameters for all references of them in docs and
comments. But this patch won't change variables and functions inside
slub as we will have wider slub/slab change.
Meanwhile, "slub_$params" can also be passed by command line, which is
to keep backward compatibility. Also mark all "slub_$params" as legacy.
Remove the separate descriptions for slub_[no]merge, append legacy tip
for them at the end of descriptions of slab_[no]merge.
[1] https://lore.kernel.org/linux-mm/7512b350-4317-21a0-fab3-4101bc4d8f7a@suse.cz/
Signed-off-by: Xiongwei Song <xiongwei.song@windriver.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
This will eliminate a call between compilation units through
__kmem_cache_alloc_node() and allow better inlining of the allocation
fast path.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
In preparation for the next patch, move the kmalloc_slab() function to
the header, as it will have callers from two files, and make it inline.
To avoid unnecessary bloat, remove all size checks/warnings from
kmalloc_slab() as they just duplicate those in callers, especially after
recent changes to kmalloc_size_roundup(). We just need to adjust handling
of zero size in __do_kmalloc_node(). Also we can stop handling NULL
result from kmalloc_slab() there as that now cannot happen (unless
called too early during boot).
The size_index array becomes visible so rename it to a more specific
kmalloc_size_index.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
This should result in better code. Currently kfree() makes a function
call between compilation units to __kmem_cache_free() which does its own
virt_to_slab(), throwing away the struct slab pointer we already had in
kfree(). Now it can be reused. Additionally kfree() can now inline the
whole SLUB freeing fastpath.
Also move over free_large_kmalloc() as the only callsites are now in
slub.c, and make it static.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
We don't share the hooks between two slab implementations anymore so
they can be moved away from the header. As part of the move, also move
should_failslab() from slab_common.c as the pre_alloc hook uses it.
This means slab.h can stop including fault-inject.h and kmemleak.h.
Fix up some files that were depending on the includes transitively.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
In slab_common.c and slab.h headers, we can now remove all code behind
CONFIG_SLAB and CONFIG_DEBUG_SLAB ifdefs, and remove all CONFIG_SLUB
ifdefs.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull RCU updates from Frederic Weisbecker:
- RCU torture, locktorture and generic torture infrastructure updates
that include various fixes, cleanups and consolidations.
Among the user visible things, ftrace dumps can now be found into
their own file, and module parameters get better documented and
reported on dumps.
- Generic and misc fixes all over the place. Some highlights:
* Hotplug handling has seen some light cleanups and comments
* An RCU barrier can now be triggered through sysfs to serialize
memory stress testing and avoid OOM
* Object information is now dumped in case of invalid callback
invocation
* Also various SRCU issues, too hard to trigger to deserve urgent
pull requests, have been fixed
- RCU documentation updates
- RCU reference scalability test minor fixes and doc improvements.
- RCU tasks minor fixes
- Stall detection updates. Introduce RCU CPU Stall notifiers that
allows a subsystem to provide informations to help debugging. Also
cure some false positive stalls.
* tag 'rcu-next-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (56 commits)
srcu: Only accelerate on enqueue time
locktorture: Check the correct variable for allocation failure
srcu: Fix callbacks acceleration mishandling
rcu: Comment why callbacks migration can't wait for CPUHP_RCUTREE_PREP
rcu: Standardize explicit CPU-hotplug calls
rcu: Conditionally build CPU-hotplug teardown callbacks
rcu: Remove references to rcu_migrate_callbacks() from diagrams
rcu: Assume rcu_report_dead() is always called locally
rcu: Assume IRQS disabled from rcu_report_dead()
rcu: Use rcu_segcblist_segempty() instead of open coding it
rcu: kmemleak: Ignore kmemleak false positives when RCU-freeing objects
srcu: Fix srcu_struct node grpmask overflow on 64-bit systems
torture: Convert parse-console.sh to mktemp
rcutorture: Traverse possible cpu to set maxcpu in rcu_nocb_toggle()
rcutorture: Replace schedule_timeout*() 1-jiffy waits with HZ/20
torture: Add kvm.sh --debug-info argument
locktorture: Rename readers_bind/writers_bind to bind_readers/bind_writers
doc: Catch-up update for locktorture module parameters
locktorture: Add call_rcu_chains module parameter
locktorture: Add new module parameters to lock_torture_print_module_parms()
...
|
|
Commit b035f5a6d852 ("mm: slab: reduce the kmalloc() minimum alignment
if DMA bouncing possible") allows architectures with non-coherent DMA to
define a small ARCH_KMALLOC_MINALIGN (e.g. sizeof(unsigned long long))
and this has been enabled on arm64. With KASAN_HW_TAGS enabled, however,
ARCH_SLAB_MINALIGN becomes 16 on arm64 (arch_slab_minalign() dynamically
selects it since commit d949a8155d13 ("mm: make minimum slab alignment a
runtime property")). This can lead to a situation where kmalloc-8 caches
are attempted to be created with a kmem_caches.size aligned to 16. When
the cache is mergeable, it can lead to kernel warnings like:
sysfs: cannot create duplicate filename '/kernel/slab/:d-0000016'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.0-rc1-00001-gda98843cd306-dirty #5
Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
dump_backtrace+0x90/0xe8
show_stack+0x18/0x24
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x24
sysfs_warn_dup+0x64/0x80
sysfs_create_dir_ns+0xe8/0x108
kobject_add_internal+0x98/0x264
kobject_init_and_add+0x8c/0xd8
sysfs_slab_add+0x12c/0x248
slab_sysfs_init+0x98/0x14c
do_one_initcall+0x6c/0x1b0
kernel_init_freeable+0x1c0/0x288
kernel_init+0x24/0x1e0
ret_from_fork+0x10/0x20
kobject: kobject_add_internal failed for :d-0000016 with -EEXIST, don't try to register things with the same name in the same directory.
SLUB: Unable to add boot slab dma-kmalloc-8 to sysfs
Limit the __kmalloc_minalign() return value (used to create the
kmalloc-* caches) to arch_slab_minalign() so that kmalloc-8 caches are
skipped when KASAN_HW_TAGS is enabled (both config and runtime).
Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: b035f5a6d852 ("mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- stable fix to prevent list corruption when destroying caches with
leftover objects (Rafael Aquini)
- fix for a gotcha in kmalloc_size_roundup() when calling it with too
high size, discovered when recently a networking call site had to be
fixed for a different issue (David Laight)
* tag 'slab-fixes-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: kmalloc_size_roundup() must not return 0 for non-zero size
mm/slab_common: fix slab_caches list corruption after kmem_cache_destroy()
|
|
The typical use of kmalloc_size_roundup() is:
ptr = kmalloc(sz = kmalloc_size_roundup(size), ...);
if (!ptr) return -ENOMEM.
This means it is vitally important that the returned value isn't less
than the argument even if the argument is insane.
In particular if kmalloc_slab() fails or the value is above
(MAX_ULONG - PAGE_SIZE) zero is returned and kmalloc() will return
its single zero-length buffer ZERO_SIZE_PTR.
Fix this by returning the input size if the size exceeds
KMALLOC_MAX_SIZE. kmalloc() will then return NULL as the size really is
too big.
kmalloc_slab() should not normally return NULL, unless called too early.
Again, returning zero is not the correct action as it can be in some
usage scenarios stored to a variable and only later cause kmalloc()
return ZERO_SIZE_PTR and subsequent crashes on access. Instead we can
simply stop checking the kmalloc_slab() result completely, as calling
kmalloc_size_roundup() too early would then result in an immediate crash
during boot and the developer noticing an issue in their code.
[vbabka@suse.cz: remove kmalloc_slab() result check, tweak comments and
commit log]
Fixes: 05a940656e1e ("slab: Introduce kmalloc_size_roundup()")
Signed-off-by: David Laight <david.laight@aculab.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Function kmem_dump_obj() will splat if passed a pointer to a non-slab
object. So nothing calls it directly, instead calling kmem_valid_obj()
first to determine whether the passed pointer to a valid slab object. This
means that merging kmem_valid_obj() into kmem_dump_obj() will make the
code more concise. Therefore, convert kmem_dump_obj() to work the same
way as vmalloc_dump_obj(), removing the need for the kmem_dump_obj()
caller to check kmem_valid_obj(). After this, there are no remaining
calls to kmem_valid_obj() anymore, and it can be safely removed.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
After the commit in Fixes:, if a module that created a slab cache does not
release all of its allocated objects before destroying the cache (at rmmod
time), we might end up releasing the kmem_cache object without removing it
from the slab_caches list thus corrupting the list as kmem_cache_destroy()
ignores the return value from shutdown_cache(), which in turn never removes
the kmem_cache object from slabs_list in case __kmem_cache_shutdown() fails
to release all of the cache's slabs.
This is easily observable on a kernel built with CONFIG_DEBUG_LIST=y
as after that ill release the system will immediately trip on list_add,
or list_del, assertions similar to the one shown below as soon as another
kmem_cache gets created, or destroyed:
[ 1041.213632] list_del corruption. next->prev should be ffff89f596fb5768, but was 52f1e5016aeee75d. (next=ffff89f595a1b268)
[ 1041.219165] ------------[ cut here ]------------
[ 1041.221517] kernel BUG at lib/list_debug.c:62!
[ 1041.223452] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 1041.225408] CPU: 2 PID: 1852 Comm: rmmod Kdump: loaded Tainted: G B W OE 6.5.0 #15
[ 1041.228244] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023
[ 1041.231212] RIP: 0010:__list_del_entry_valid+0xae/0xb0
Another quick way to trigger this issue, in a kernel with CONFIG_SLUB=y,
is to set slub_debug to poison the released objects and then just run
cat /proc/slabinfo after removing the module that leaks slab objects,
in which case the kernel will panic:
[ 50.954843] general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 [#1] PREEMPT SMP PTI
[ 50.961545] CPU: 2 PID: 1495 Comm: cat Kdump: loaded Tainted: G B W OE 6.5.0 #15
[ 50.966808] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023
[ 50.972663] RIP: 0010:get_slabinfo+0x42/0xf0
This patch fixes this issue by properly checking shutdown_cache()'s
return value before taking the kmem_cache_release() branch.
Fixes: 0495e337b703 ("mm/slab_common: Deleting kobject in kmem_cache_destroy() without holding slab_mutex/cpu_hotplug_lock")
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-maping updates from Christoph Hellwig:
- allow dynamic sizing of the swiotlb buffer, to cater for secure
virtualization workloads that require all I/O to be bounce buffered
(Petr Tesarik)
- move a declaration to a header (Arnd Bergmann)
- check for memory region overlap in dma-contiguous (Binglei Wang)
- remove the somewhat dangerous runtime swiotlb-xen enablement and
unexport is_swiotlb_active (Christoph Hellwig, Juergen Gross)
- per-node CMA improvements (Yajun Deng)
* tag 'dma-mapping-6.6-2023-08-29' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: optimize get_max_slots()
swiotlb: move slot allocation explanation comment where it belongs
swiotlb: search the software IO TLB only if the device makes use of it
swiotlb: allocate a new memory pool when existing pools are full
swiotlb: determine potential physical address limit
swiotlb: if swiotlb is full, fall back to a transient memory pool
swiotlb: add a flag whether SWIOTLB is allowed to grow
swiotlb: separate memory pool data from other allocator data
swiotlb: add documentation and rename swiotlb_do_find_slots()
swiotlb: make io_tlb_default_mem local to swiotlb.c
swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocated
dma-contiguous: check for memory region overlap
dma-contiguous: support numa CMA for specified node
dma-contiguous: support per-numa CMA for all architectures
dma-mapping: move arch_dma_set_mask() declaration to header
swiotlb: unexport is_swiotlb_active
x86: always initialize xen-swiotlb when xen-pcifront is enabling
xen/pci: add flag for PCI passthrough being possible
|
|
SWIOTLB implementation details should not be exposed to the rest of the
kernel. This will allow to make changes to the implementation without
modifying non-swiotlb code.
To avoid breaking existing users, provide helper functions for the few
required fields.
As a bonus, using a helper function to initialize struct device allows to
get rid of an #ifdef in driver core.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When exploiting memory vulnerabilities, "heap spraying" is a common
technique targeting those related to dynamic memory allocation (i.e. the
"heap"), and it plays an important role in a successful exploitation.
Basically, it is to overwrite the memory area of vulnerable object by
triggering allocation in other subsystems or modules and therefore
getting a reference to the targeted memory location. It's usable on
various types of vulnerablity including use after free (UAF), heap out-
of-bound write and etc.
There are (at least) two reasons why the heap can be sprayed: 1) generic
slab caches are shared among different subsystems and modules, and
2) dedicated slab caches could be merged with the generic ones.
Currently these two factors cannot be prevented at a low cost: the first
one is a widely used memory allocation mechanism, and shutting down slab
merging completely via `slub_nomerge` would be overkill.
To efficiently prevent heap spraying, we propose the following approach:
to create multiple copies of generic slab caches that will never be
merged, and random one of them will be used at allocation. The random
selection is based on the address of code that calls `kmalloc()`, which
means it is static at runtime (rather than dynamically determined at
each time of allocation, which could be bypassed by repeatedly spraying
in brute force). In other words, the randomness of cache selection will
be with respect to the code address rather than time, i.e. allocations
in different code paths would most likely pick different caches,
although kmalloc() at each place would use the same cache copy whenever
it is executed. In this way, the vulnerable object and memory allocated
in other subsystems and modules will (most probably) be on different
slab caches, which prevents the object from being sprayed.
Meanwhile, the static random selection is further enhanced with a
per-boot random seed, which prevents the attacker from finding a usable
kmalloc that happens to pick the same cache with the vulnerable
subsystem/module by analyzing the open source code. In other words, with
the per-boot seed, the random selection is static during each time the
system starts and runs, but not across different system startups.
The overhead of performance has been tested on a 40-core x86 server by
comparing the results of `perf bench all` between the kernels with and
without this patch based on the latest linux-next kernel, which shows
minor difference. A subset of benchmarks are listed below:
sched/ sched/ syscall/ mem/ mem/
messaging pipe basic memcpy memset
(sec) (sec) (sec) (GB/sec) (GB/sec)
control1 0.019 5.459 0.733 15.258789 51.398026
control2 0.019 5.439 0.730 16.009221 48.828125
control3 0.019 5.282 0.735 16.009221 48.828125
control_avg 0.019 5.393 0.733 15.759077 49.684759
experiment1 0.019 5.374 0.741 15.500992 46.502976
experiment2 0.019 5.440 0.746 16.276042 51.398026
experiment3 0.019 5.242 0.752 15.258789 51.398026
experiment_avg 0.019 5.352 0.746 15.678608 49.766343
The overhead of memory usage was measured by executing `free` after boot
on a QEMU VM with 1GB total memory, and as expected, it's positively
correlated with # of cache copies:
control 4 copies 8 copies 16 copies
total 969.8M 968.2M 968.2M 968.2M
used 20.0M 21.9M 24.1M 26.7M
free 936.9M 933.6M 931.4M 928.6M
available 932.2M 928.8M 926.6M 923.9M
Co-developed-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: GONG, Ruiqi <gongruiqi@huaweicloud.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Dennis Zhou <dennis@kernel.org> # percpu
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLAB deprecation:
Following the discussion at LSF/MM 2023 [1] and no objections, the
SLAB allocator is deprecated by renaming the config option (to make
its users notice) to CONFIG_SLAB_DEPRECATED with updated help text.
SLUB should be used instead. Existing defconfigs with CONFIG_SLAB are
also updated.
- SLAB_NO_MERGE kmem_cache flag (Jesper Dangaard Brouer):
There are (very limited) cases where kmem_cache merging is
undesirable, and existing ways to prevent it are hacky. Introduce a
new flag to do that cleanly and convert the existing hacky users.
Btrfs plans to use this for debug kernel builds (that use case is
always fine), networking for performance reasons (that should be very
rare).
- Replace the usage of weak PRNGs (David Keisar Schmidt):
In addition to using stronger RNGs for the security related features,
the code is a bit cleaner.
- Misc code cleanups (SeongJae Parki, Xiongwei Song, Zhen Lei, and
zhaoxinchao)
Link: https://lwn.net/Articles/932201/ [1]
* tag 'slab-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab_common: use SLAB_NO_MERGE instead of negative refcount
mm/slab: break up RCU readers on SLAB_TYPESAFE_BY_RCU example code
mm/slab: add a missing semicolon on SLAB_TYPESAFE_BY_RCU example code
mm/slab_common: reduce an if statement in create_cache()
mm/slab: introduce kmem_cache flag SLAB_NO_MERGE
mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
mm/slab: remove HAVE_HARDENED_USERCOPY_ALLOCATOR
mm/slab_common: Replace invocation of weak PRNG
mm/slab: Replace invocation of weak PRNG
slub: Don't read nr_slabs and total_objects directly
slub: Remove slabs_node() function
slub: Remove CONFIG_SMP defined check
slub: Put objects_show() into CONFIG_SLUB_DEBUG enabled block
slub: Correct the error code when slab_kset is NULL
mm/slab: correct return values in comment for _kmem_cache_create()
|
|
If an architecture opted in to DMA bouncing of unaligned kmalloc() buffers
(ARCH_WANT_KMALLOC_DMA_BOUNCE), reduce the minimum kmalloc() cache
alignment below cache-line size to ARCH_KMALLOC_MINALIGN.
Link: https://lkml.kernel.org/r/20230612153201.554742-17-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Do not create kmalloc() caches which are not aligned to
dma_get_cache_alignment(). There is no functional change since for
current architectures defining ARCH_DMA_MINALIGN, ARCH_KMALLOC_MINALIGN
equals ARCH_DMA_MINALIGN (and dma_get_cache_alignment()). On
architectures without a specific ARCH_DMA_MINALIGN,
dma_get_cache_alignment() is 1, so no change to the kmalloc() caches.
Link: https://lkml.kernel.org/r/20230612153201.554742-5-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In the slab variant of kmem_cache_init(), call new_kmalloc_cache() instead
of initialising the kmalloc_caches array directly. With this,
create_kmalloc_cache() is now only called from new_kmalloc_cache() in the
same file, so make it static. In addition, the useroffset argument is
always 0 while usersize is the same as size. Remove them.
Link: https://lkml.kernel.org/r/20230612153201.554742-4-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
'slab/for-6.5/slab-deprecate' into slab/for-next
Merge the feature branches scheduled for 6.5:
- replace the usage of weak PRNGs, by David Keisar Schmidt
- introduce the SLAB_NO_MERGE kmem_cache flag, by Jesper Dangaard Brouer
- deprecate CONFIG_SLAB, with a planned removal, by myself
|
|
When CONFIG_MEMCG_KMEM is enabled, we disable cache merging for
KMALLOC_NORMAL caches so they don't end up merged with a cache that uses
ad-hoc __GFP_ACCOUNT when allocating. This was implemented by setting
the refcount to -1, but now we have a proper SLAB_NO_MERGE flag, so use
that instead.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
|
|
Move the 'out:' statement block out of the successful path to avoid
redundant check on 'err'. The value of 'err' is always zero on success
and negative on failure.
No functional changes, no performance improvements, just a little more
readability.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Allow API users of kmem_cache_create to specify that they don't want
any slab merge or aliasing (with similar sized objects). Use this in
kfence_test.
The SKB (sk_buff) kmem_cache slab is critical for network performance.
Network stack uses kmem_cache_{alloc,free}_bulk APIs to gain
performance by amortising the alloc/free cost.
For the bulk API to perform efficiently the slub fragmentation need to
be low. Especially for the SLUB allocator, the efficiency of bulk free
API depend on objects belonging to the same slab (page).
When running different network performance microbenchmarks, I started
to notice that performance was reduced (slightly) when machines had
longer uptimes. I believe the cause was 'skbuff_head_cache' got
aliased/merged into the general slub for 256 bytes sized objects (with
my kernel config, without CONFIG_HARDENED_USERCOPY).
For SKB kmem_cache network stack have reasons for not merging, but it
varies depending on kernel config (e.g. CONFIG_HARDENED_USERCOPY).
We want to explicitly set SLAB_NO_MERGE for this kmem_cache.
Another use case for the flag has been described by David Sterba [1]:
> This can be used for more fine grained control over the caches or for
> debugging builds where separate slabs can verify that no objects leak.
> The slab_nomerge boot option is too coarse and would need to be
> enabled on all testing hosts. There are some other ways how to disable
> merging, e.g. a slab constructor but this disables poisoning besides
> that it adds additional overhead. Other flags are internal and may
> have other semantics.
> A concrete example what motivates the flag. During 'btrfs balance'
> slab top reported huge increase in caches like
> 1330095 1330095 100% 0.10K 34105 39 136420K Acpi-ParseExt
> 1734684 1734684 100% 0.14K 61953 28 247812K pid_namespace
> 8244036 6873075 83% 0.11K 229001 36 916004K khugepaged_mm_slot
> which was confusing and that it's because of slab merging was not the
> first idea. After rebooting with slab_nomerge all the caches were
> from btrfs_ namespace as expected.
[1] https://lore.kernel.org/all/20230524101748.30714-1-dsterba@suse.com/
[ vbabka@suse.cz: rename to SLAB_NO_MERGE, change the flag value to the
one proposed by David so it does not collide with internal SLAB/SLUB
flags, write a comment for the flag, expand changelog, drop the skbuff
part to be handled spearately ]
Link: https://lore.kernel.org/all/167396280045.539803.7540459812377220500.stgit@firesoul/
Reported-by: David Sterba <dsterba@suse.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
|
|
The Slab allocator randomization inside slab_common.c
uses the prandom_u32 PRNG. That was added to prevent attackers to obtain
information on the heap state.
However, this PRNG turned out to be weak, as noted in commit c51f8f88d705
To fix it, we have changed the invocation of prandom_u32_state to get_random_u32
to ensure the PRNG is strong.
Since a modulo operation is applied right after that,
in the Fisher-Yates shuffle, we used get_random_u32_below, to achieve uniformity.
Signed-off-by: David Keisar Schmidt <david.keisarschm@mail.huji.ac.il>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
This will make it easier to free objects in situations when they can
come from either kmalloc() or kmem_cache_alloc(), and also allow
kfree_rcu() for freeing objects from kmem_cache_alloc().
For the SLAB and SLUB allocators this was always possible so with SLOB
gone, we can document it as supported.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
|
|
CONFIG_SLOB has been removed from Kconfig. Remove code and #ifdef's
specific to SLOB in the slab headers and common code.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
struct 'kasan_cache' has a member 'is_kmalloc' indicating whether its host
kmem_cache is a kmalloc cache. With newly introduced is_kmalloc_cache()
helper, 'is_kmalloc' and its related function can be replaced and removed.
Also 'kasan_cache' is only needed by KASAN generic mode, and not by SW/HW
tag modes, so refine its protection macro accordingly, suggested by Andrey
Konoval.
Link: https://lkml.kernel.org/r/20230104060605.930910-2-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
- Convert flexible array members, fix -Wstringop-overflow warnings, and
fix KCFI function type mismatches that went ignored by maintainers
(Gustavo A. R. Silva, Nathan Chancellor, Kees Cook)
- Remove the remaining side-effect users of ksize() by converting
dma-buf, btrfs, and coredump to using kmalloc_size_roundup(), add
more __alloc_size attributes, and introduce full testing of all
allocator functions. Finally remove the ksize() side-effect so that
each allocation-aware checker can finally behave without exceptions
- Introduce oops_limit (default 10,000) and warn_limit (default off) to
provide greater granularity of control for panic_on_oops and
panic_on_warn (Jann Horn, Kees Cook)
- Introduce overflows_type() and castable_to_type() helpers for cleaner
overflow checking
- Improve code generation for strscpy() and update str*() kern-doc
- Convert strscpy and sigphash tests to KUnit, and expand memcpy tests
- Always use a non-NULL argument for prepare_kernel_cred()
- Disable structleak plugin in FORTIFY KUnit test (Anders Roxell)
- Adjust orphan linker section checking to respect CONFIG_WERROR (Xin
Li)
- Make sure siginfo is cleared for forced SIGKILL (haifeng.xu)
- Fix um vs FORTIFY warnings for always-NULL arguments
* tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (31 commits)
ksmbd: replace one-element arrays with flexible-array members
hpet: Replace one-element array with flexible-array member
um: virt-pci: Avoid GCC non-NULL warning
signal: Initialize the info in ksignal
lib: fortify_kunit: build without structleak plugin
panic: Expose "warn_count" to sysfs
panic: Introduce warn_limit
panic: Consolidate open-coded panic_on_warn checks
exit: Allow oops_limit to be disabled
exit: Expose "oops_count" to sysfs
exit: Put an upper limit on how often we can oops
panic: Separate sysctl logic from CONFIG_SMP
mm/pgtable: Fix multiple -Wstringop-overflow warnings
mm: Make ksize() a reporting-only function
kunit/fortify: Validate __alloc_size attribute results
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
driver core: Add __alloc_size hint to devm allocators
overflow: Introduce overflows_type() and castable_to_type()
coredump: Proactively round up to kmalloc bucket size
...
|
|
With all "silently resizing" callers of ksize() refactored, remove the
logic in ksize() that would allow it to be used to effectively change
the size of an allocation (bypassing __alloc_size hints, etc). Users
wanting this feature need to either use kmalloc_size_roundup() before an
allocation, or use krealloc() directly.
For kfree_sensitive(), move the unpoisoning logic inline. Replace the
some of the partially open-coded ksize() in __do_krealloc with ksize()
now that it doesn't perform unpoisoning.
Adjust the KUnit tests to match the new ksize() behavior. Execution
tested with:
$ ./tools/testing/kunit/kunit.py run \
--kconfig_add CONFIG_KASAN=y \
--kconfig_add CONFIG_KASAN_GENERIC=y \
--arch x86_64 kasan
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: linux-mm@kvack.org
Cc: kasan-dev@googlegroups.com
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Enhanced-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Merge my series [1] to deprecate the SLOB allocator.
- Renames CONFIG_SLOB to CONFIG_SLOB_DEPRECATED with deprecation notice.
- The recommended replacement is CONFIG_SLUB, optionally with the new
CONFIG_SLUB_TINY tweaks for systems with 16MB or less RAM.
- Use cases that stopped working with CONFIG_SLUB_TINY instead of SLOB
should be reported to linux-mm@kvack.org and slab maintainers,
otherwise SLOB will be removed in few cycles.
[1] https://lore.kernel.org/all/20221121171202.22080-1-vbabka@suse.cz/
|
|
Distinguishing kmalloc(__GFP_RECLAIMABLE) can help against fragmentation
by grouping pages by mobility, but on tiny systems the extra memory
overhead of separate set of kmalloc-rcl caches will probably be worse,
and mobility grouping likely disabled anyway.
Thus with CONFIG_SLUB_TINY, don't create kmalloc-rcl caches and use the
regular ones.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
|
|
With CONFIG_HARDENED_USERCOPY not enabled, there are no
__check_heap_object() checks happening that would use the struct
kmem_cache useroffset and usersize fields. Yet the fields are still
initialized, preventing merging of otherwise compatible caches.
Also the fields contribute to struct kmem_cache size unnecessarily when
unused. Thus #ifdef them out completely when CONFIG_HARDENED_USERCOPY is
disabled. In kmem_dump_obj() print object_size instead of usersize, as
that's actually the intention.
In a quick virtme boot test, this has reduced the number of caches in
/proc/slabinfo from 131 to 111.
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
|
|
kmalloc will round up the request size to a fixed size (mostly power
of 2), so there could be a extra space than what is requested, whose
size is the actual buffer size minus original request size.
To better detect out of bound access or abuse of this space, add
redzone sanity check for it.
In current kernel, some kmalloc user already knows the existence of
the space and utilizes it after calling 'ksize()' to know the real
size of the allocated buffer. So we skip the sanity check for objects
which have been called with ksize(), as treating them as legitimate
users. Kees Cook is working on sanitizing all these user cases,
by using kmalloc_size_roundup() to avoid ambiguous usages. And after
this is done, this special handling for ksize() can be removed.
In some cases, the free pointer could be saved inside the latter
part of object data area, which may overlap the redzone part(for
small sizes of kmalloc objects). As suggested by Hyeonggon Yoo,
force the free pointer to be in meta data area when kmalloc redzone
debug is enabled, to make all kmalloc objects covered by redzone
check.
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Akira reports:
> "make htmldocs" reports duplicate C declaration of ksize() as follows:
> /linux/Documentation/core-api/mm-api:43: ./mm/slab_common.c:1428: WARNING: Duplicate C declaration, also defined at core-api/mm-api:212.
> Declaration is '.. c:function:: size_t ksize (const void *objp)'.
> This is due to the kernel-doc comment for ksize() declaration added in
> include/linux/slab.h by commit 05a940656e1e ("slab: Introduce
> kmalloc_size_roundup()").
There is an older kernel-doc comment for ksize() definition in
mm/slab_common.c, which is not only duplicated, but also contradicts the
new one - the additional storage discovered by ksize() should not be
used by callers anymore. Delete the old kernel-doc.
Reported-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/all/d33440f6-40cf-9747-3340-e54ffaf7afb8@gmail.com/
Fixes: 05a940656e1e ("slab: Introduce kmalloc_size_roundup()")
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The "caller" argument was accidentally being ignored in a few places
that were recently refactored. Restore these "caller" arguments, instead
of _RET_IP_.
Fixes: 11e9734bcb6a ("mm/slab_common: unify NUMA and UMA version of tracepoints")
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: linux-mm@kvack.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
For !CONFIG_TRACING kernels, the kmalloc() implementation tries (in cases where
the allocation size is build-time constant) to save a function call, by
inlining kmalloc_trace() to a kmem_cache_alloc() call.
However since commit 6edf2576a6cc ("mm/slub: enable debugging memory wasting of
kmalloc") this path now fails to pass the original request size to be
eventually recorded (for kmalloc caches with debugging enabled).
We could adjust the code to call __kmem_cache_alloc_node() as the
CONFIG_TRACING variant, but that would as a result inline a call with 5
parameters, bloating the kmalloc() call sites. The cost of extra function
call (to kmalloc_trace()) seems like a lesser evil.
It also appears that the !CONFIG_TRACING variant is incompatible with upcoming
hardening efforts [1] so it's easier if we just remove it now. Kernels with no
tracing are rare these days and the benefit is dubious anyway.
[1] https://lore.kernel.org/linux-mm/20221101222520.never.109-kees@kernel.org/T/#m20ecf14390e406247bde0ea9cce368f469c539ed
Link: https://lore.kernel.org/all/097d8fba-bd10-a312-24a3-a4068c4f424c@suse.cz/
Suggested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Commit 445d41d7a7c1 ("Merge branch 'slab/for-6.1/kmalloc_size_roundup' into
slab/for-next") resolved a conflict of two concurrent changes to __ksize().
However, it did not adjust the kernel-doc comment of __ksize(), while the
name of the argument to __ksize() was renamed.
Hence, ./scripts/ kernel-doc -none mm/slab_common.c warns about it.
Adjust the kernel-doc comment for __ksize() for make W=1 happiness.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
|
