| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commits 86327e8eb94c ("memcg: drop kmem.limit_in_bytes") and
partially reverts 58056f77502f ("memcg, kmem: further deprecate
kmem.limit_in_bytes") which have incrementally removed support for the
kernel memory accounting hard limit. Unfortunately it has turned out that
there is still userspace depending on the existence of
memory.kmem.limit_in_bytes [1]. The underlying functionality is not
really required but the non-existent file just confuses the userspace
which fails in the result. The patch to fix this on the userspace side
has been submitted but it is hard to predict how it will propagate through
the maze of 3rd party consumers of the software.
Now, reverting alone 86327e8eb94c is not an option because there is
another set of userspace which cannot cope with ENOTSUPP returned when
writing to the file. Therefore we have to go and revisit 58056f77502f as
well. There are two ways to go ahead. Either we give up on the
deprecation and fully revert 58056f77502f as well or we can keep
kmem.limit_in_bytes but make the write a noop and warn about the fact.
This should work for both known breaking workloads which depend on the
existence but do not depend on the hard limit enforcement.
Note to backporters to stable trees. a8c49af3be5f ("memcg: add per-memcg
total kernel memory stat") introduced in 4.18 has added memcg_account_kmem
so the accounting is not done by obj_cgroup_charge_pages directly for v1
anymore. Prior kernels need to add it explicitly (thanks to Johannes for
pointing this out).
[akpm@linux-foundation.org: fix build - remove unused local]
Link: http://lkml.kernel.org/r/20230920081101.GA12096@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net [1]
Link: https://lkml.kernel.org/r/ZRE5VJozPZt9bRPy@dhcp22.suse.cz
Fixes: 86327e8eb94c ("memcg: drop kmem.limit_in_bytes")
Fixes: 58056f77502f ("memcg, kmem: further deprecate kmem.limit_in_bytes")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Breno and Josef report a deadlock scenario from cgroup reclaim
re-entering the filesystem:
[ 361.546690] ======================================================
[ 361.559210] WARNING: possible circular locking dependency detected
[ 361.571703] 6.5.0-0_fbk700_debug_rc0_kbuilder_13159_gbf787a128001 #1 Tainted: G S E
[ 361.589704] ------------------------------------------------------
[ 361.602277] find/9315 is trying to acquire lock:
[ 361.611625] ffff88837ba140c0 (&delayed_node->mutex){+.+.}-{4:4}, at: __btrfs_release_delayed_node+0x68/0x4f0
[ 361.631437]
[ 361.631437] but task is already holding lock:
[ 361.643243] ffff8881765b8678 (btrfs-tree-01){++++}-{4:4}, at: btrfs_tree_read_lock+0x1e/0x40
[ 362.904457] mutex_lock_nested+0x1c/0x30
[ 362.912414] __btrfs_release_delayed_node+0x68/0x4f0
[ 362.922460] btrfs_evict_inode+0x301/0x770
[ 362.982726] evict+0x17c/0x380
[ 362.988944] prune_icache_sb+0x100/0x1d0
[ 363.005559] super_cache_scan+0x1f8/0x260
[ 363.013695] do_shrink_slab+0x2a2/0x540
[ 363.021489] shrink_slab_memcg+0x237/0x3d0
[ 363.050606] shrink_slab+0xa7/0x240
[ 363.083382] shrink_node_memcgs+0x262/0x3b0
[ 363.091870] shrink_node+0x1a4/0x720
[ 363.099150] shrink_zones+0x1f6/0x5d0
[ 363.148798] do_try_to_free_pages+0x19b/0x5e0
[ 363.157633] try_to_free_mem_cgroup_pages+0x266/0x370
[ 363.190575] reclaim_high+0x16f/0x1f0
[ 363.208409] mem_cgroup_handle_over_high+0x10b/0x270
[ 363.246678] try_charge_memcg+0xaf2/0xc70
[ 363.304151] charge_memcg+0xf0/0x350
[ 363.320070] __mem_cgroup_charge+0x28/0x40
[ 363.328371] __filemap_add_folio+0x870/0xd50
[ 363.371303] filemap_add_folio+0xdd/0x310
[ 363.399696] __filemap_get_folio+0x2fc/0x7d0
[ 363.419086] pagecache_get_page+0xe/0x30
[ 363.427048] alloc_extent_buffer+0x1cd/0x6a0
[ 363.435704] read_tree_block+0x43/0xc0
[ 363.443316] read_block_for_search+0x361/0x510
[ 363.466690] btrfs_search_slot+0xc8c/0x1520
This is caused by the mem_cgroup_handle_over_high() not respecting the
gfp_mask of the allocation context. We used to only call this function on
resume to userspace, where no locks were held. But c9afe31ec443 ("memcg:
synchronously enforce memory.high for large overcharges") added a call
from the allocation context without considering the gfp.
Link: https://lkml.kernel.org/r/20230914152139.100822-1-hannes@cmpxchg.org
Fixes: c9afe31ec443 ("memcg: synchronously enforce memory.high for large overcharges")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Breno Leitao <leitao@debian.org>
Reported-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org> [5.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In the eviction recency check, we attempt to retrieve the memcg to which
the folio belonged when it was evicted, by the memcg id stored in the
shadow entry. However, there is a chance that the retrieved memcg is not
the original memcg that has been killed, but a new one which happens to
have the same id.
This is a somewhat unfortunate, but acceptable and rare inaccuracy in the
heuristics. However, if we retrieve this new memcg between its allocation
and when it is properly attached to the memcg hierarchy, we could run into
the following NULL pointer exception during the memcg hierarchy traversal
done in mem_cgroup_get_nr_swap_pages():
[ 155757.793456] BUG: kernel NULL pointer dereference, address: 00000000000000c0
[ 155757.807568] #PF: supervisor read access in kernel mode
[ 155757.818024] #PF: error_code(0x0000) - not-present page
[ 155757.828482] PGD 401f77067 P4D 401f77067 PUD 401f76067 PMD 0
[ 155757.839985] Oops: 0000 [#1] SMP
[ 155757.887870] RIP: 0010:mem_cgroup_get_nr_swap_pages+0x3d/0xb0
[ 155757.899377] Code: 29 19 4a 02 48 39 f9 74 63 48 8b 97 c0 00 00 00 48 8b b7 58 02 00 00 48 2b b7 c0 01 00 00 48 39 f0 48 0f 4d c6 48 39 d1 74 42 <48> 8b b2 c0 00 00 00 48 8b ba 58 02 00 00 48 2b ba c0 01 00 00 48
[ 155757.937125] RSP: 0018:ffffc9002ecdfbc8 EFLAGS: 00010286
[ 155757.947755] RAX: 00000000003a3b1c RBX: 000007ffffffffff RCX: ffff888280183000
[ 155757.962202] RDX: 0000000000000000 RSI: 0007ffffffffffff RDI: ffff888bbc2d1000
[ 155757.976648] RBP: 0000000000000001 R08: 000000000000000b R09: ffff888ad9cedba0
[ 155757.991094] R10: ffffea0039c07900 R11: 0000000000000010 R12: ffff888b23a7b000
[ 155758.005540] R13: 0000000000000000 R14: ffff888bbc2d1000 R15: 000007ffffc71354
[ 155758.019991] FS: 00007f6234c68640(0000) GS:ffff88903f9c0000(0000) knlGS:0000000000000000
[ 155758.036356] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 155758.048023] CR2: 00000000000000c0 CR3: 0000000a83eb8004 CR4: 00000000007706e0
[ 155758.062473] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 155758.076924] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 155758.091376] PKRU: 55555554
[ 155758.096957] Call Trace:
[ 155758.102016] <TASK>
[ 155758.106502] ? __die+0x78/0xc0
[ 155758.112793] ? page_fault_oops+0x286/0x380
[ 155758.121175] ? exc_page_fault+0x5d/0x110
[ 155758.129209] ? asm_exc_page_fault+0x22/0x30
[ 155758.137763] ? mem_cgroup_get_nr_swap_pages+0x3d/0xb0
[ 155758.148060] workingset_test_recent+0xda/0x1b0
[ 155758.157133] workingset_refault+0xca/0x1e0
[ 155758.165508] filemap_add_folio+0x4d/0x70
[ 155758.173538] page_cache_ra_unbounded+0xed/0x190
[ 155758.182919] page_cache_sync_ra+0xd6/0x1e0
[ 155758.191738] filemap_read+0x68d/0xdf0
[ 155758.199495] ? mlx5e_napi_poll+0x123/0x940
[ 155758.207981] ? __napi_schedule+0x55/0x90
[ 155758.216095] __x64_sys_pread64+0x1d6/0x2c0
[ 155758.224601] do_syscall_64+0x3d/0x80
[ 155758.232058] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 155758.242473] RIP: 0033:0x7f62c29153b5
[ 155758.249938] Code: e8 48 89 75 f0 89 7d f8 48 89 4d e0 e8 b4 e6 f7 ff 41 89 c0 4c 8b 55 e0 48 8b 55 e8 48 8b 75 f0 8b 7d f8 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 45 f8 e8 e7 e6 f7 ff 48 8b
[ 155758.288005] RSP: 002b:00007f6234c5ffd0 EFLAGS: 00000293 ORIG_RAX: 0000000000000011
[ 155758.303474] RAX: ffffffffffffffda RBX: 00007f628c4e70c0 RCX: 00007f62c29153b5
[ 155758.318075] RDX: 000000000003c041 RSI: 00007f61d2986000 RDI: 0000000000000076
[ 155758.332678] RBP: 00007f6234c5fff0 R08: 0000000000000000 R09: 0000000064d5230c
[ 155758.347452] R10: 000000000027d450 R11: 0000000000000293 R12: 000000000003c041
[ 155758.362044] R13: 00007f61d2986000 R14: 00007f629e11b060 R15: 000000000027d450
[ 155758.376661] </TASK>
This patch fixes the issue by moving the memcg's id publication from the
alloc stage to online stage, ensuring that any memcg acquired via id must
be connected to the memcg tree.
Link: https://lkml.kernel.org/r/20230823225430.166925-1-nphamcs@gmail.com
Fixes: f78dfc7b77d5 ("workingset: fix confusion around eviction vs refault container")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Co-developed-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert the return values to an ReST list and tidy up the wording while
I'm touching it.
[akpm@linux-foundation.org: changes suggested by Randy]
[willy@infradead.org: another change suggested by Randy]
Link: https://lkml.kernel.org/r/ZOUZtZizeQG7PcsM@casper.infradead.org
Link: https://lkml.kernel.org/r/20230818200630.2719595-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__mem_cgroup_uncharge_swap is only called in mem_cgroup_uncharge_swap, if
mem cgroup is disabled, __mem_cgroup_uncharge_swap cannot be called.
Therefore, there is no need to judge whether mem_cgroup is disabled or
not.
Link: https://lkml.kernel.org/r/20230819081302.1217098-1-lujialin4@huawei.com
Signed-off-by: Lu Jialin <lujialin4@huawei.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, memcg uses rstat to maintain aggregated hierarchical stats.
Counters are maintained for hierarchical stats at each memcg. Rstat
tracks which cgroups have updates on which cpus to keep those counters
fresh on the read-side.
Non-hierarchical stats are currently not covered by rstat. Their per-cpu
counters are summed up on every read, which is expensive. The original
implementation did the same. At some point before rstat, non-hierarchical
aggregated counters were introduced by commit a983b5ebee57 ("mm:
memcontrol: fix excessive complexity in memory.stat reporting"). However,
those counters were updated on the performance critical write-side, which
caused regressions, so they were later removed by commit 815744d75152
("mm: memcontrol: don't batch updates of local VM stats and events"). See
[1] for more detailed history.
Kernel versions in between a983b5ebee57 & 815744d75152 (a year and a half)
enjoyed cheap reads of non-hierarchical stats, specifically on cgroup v1.
When moving to more recent kernels, a performance regression for reading
non-hierarchical stats is observed.
Now that we have rstat, we know exactly which percpu counters have updates
for each stat. We can maintain non-hierarchical counters again, making
reads much more efficient, without affecting the performance critical
write-side. Hence, add non-hierarchical (i.e local) counters for the
stats, and extend rstat flushing to keep those up-to-date.
A caveat is that we now need a stats flush before reading
local/non-hierarchical stats through {memcg/lruvec}_page_state_local() or
memcg_events_local(), where we previously only needed a flush to read
hierarchical stats. Most contexts reading non-hierarchical stats are
already doing a flush, add a flush to the only missing context in
count_shadow_nodes().
With this patch, reading memory.stat from 1000 memcgs is 3x faster on a
machine with 256 cpus on cgroup v1:
# for i in $(seq 1000); do mkdir /sys/fs/cgroup/memory/cg$i; done
# time cat /sys/fs/cgroup/memory/cg*/memory.stat > /dev/null
real 0m0.125s
user 0m0.005s
sys 0m0.120s
After:
real 0m0.032s
user 0m0.005s
sys 0m0.027s
To make sure there are no regressions on cgroup v2, I ran an artificial
reclaim/refault stress test [2] that creates (NR_CPUS * 2) cgroups,
assigns them limits, runs a worker process in each cgroup that allocates
tmpfs memory equal to quadruple the limit (to invoke reclaim
continuously), and then reads back the entire file (to invoke refaults).
All workers are run in parallel, and zram is used as a swapping backend.
Both reclaim and refault have conditional stats flushing. I ran this on a
machine with 112 cpus, once on mm-unstable, and once on mm-unstable with
this patch reverted.
(1) A few runs without this patch:
# time ./stress_reclaim_refault.sh
real 0m9.949s
user 0m0.496s
sys 14m44.974s
# time ./stress_reclaim_refault.sh
real 0m10.049s
user 0m0.486s
sys 14m55.791s
# time ./stress_reclaim_refault.sh
real 0m9.984s
user 0m0.481s
sys 14m53.841s
(2) A few runs with this patch:
# time ./stress_reclaim_refault.sh
real 0m9.885s
user 0m0.486s
sys 14m48.753s
# time ./stress_reclaim_refault.sh
real 0m9.903s
user 0m0.495s
sys 14m48.339s
# time ./stress_reclaim_refault.sh
real 0m9.861s
user 0m0.507s
sys 14m49.317s
No regressions are observed with this patch. There is actually a very
slight improvement. If I have to guess, maybe it's because we avoid
the percpu loop in count_shadow_nodes() when calling
lruvec_page_state_local(), but I could not prove this using perf, it's
probably in the noise.
[1] https://lore.kernel.org/lkml/20230725201811.GA1231514@cmpxchg.org/
[2] https://lore.kernel.org/lkml/CAJD7tkb17x=qwoO37uxyYXLEUVp15BQKR+Xfh7Sg9Hx-wTQ_=w@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230803185046.1385770-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20230726153223.821757-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This function is misleading; people think it means "Is this a THP", when
all it actually does is check whether this is a large folio. Remove it;
the one remaining user should have been checking to see whether the folio
is PMD sized or not.
Link: https://lkml.kernel.org/r/20230816151201.3655946-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
Patch series "cleanup with helper macro K()".
Use helper macro K() to improve code readability. No functional
modification involved. Remove redundant K() macro definition.
This patch (of 7):
Since commit eb8589b4f8c1 ("mm: move mem_init_print_info() to mm_init.c"),
the K() macro definition has been moved to mm/internal.h. Therefore, the
definitions in mm/memcontrol.c, mm/backing-dev.c and mm/oom_kill.c are
redundant. Drop redundant definitions.
[akpm@linux-foundation.org: oom_kill.c: remove "#undef K", per Kefeng]
Link: https://lkml.kernel.org/r/20230804012559.2617515-1-zhangpeng362@huawei.com
Link: https://lkml.kernel.org/r/20230804012559.2617515-2-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The correct function name is obj_cgroup_may_zswap(). Correct the comment.
Link: https://lkml.kernel.org/r/20230803120021.762279-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Before commit f53af4285d77 ("mm: vmscan: fix extreme overreclaim and swap
floods"), proactive reclaim will extreme overreclaim sometimes. But
proactive reclaim still inaccurate and some extent overreclaim.
Problematic case is easy to construct. Allocate lots of anonymous memory
(e.g., 20G) in a memcg, then swapping by writing memory.recalim and there
is a certain probability of overreclaim. For example, request 1G by
writing memory.reclaim will eventually reclaim 1.7G or other values more
than 1G.
The reason is that reclaimer may have already reclaimed part of requested
memory in one loop, but before adjust sc->nr_to_reclaim in outer loop,
call shrink_lruvec() again will still follow the current sc->nr_to_reclaim
to work. It will eventually lead to overreclaim. In theory, the amount
of reclaimed would be in [request, 2 * request).
Reclaimer usually tends to reclaim more than request. But either direct
or kswapd reclaim have much smaller nr_to_reclaim targets, so it is less
noticeable and not have much impact.
Proactive reclaim can usually come in with a larger value, so the error is
difficult to ignore. Considering proactive reclaim is usually low
frequency, handle the batching into smaller chunks is a better approach.
Link: https://lkml.kernel.org/r/20230721014116.3388-1-yangyifei03@kuaishou.com
Signed-off-by: Efly Young <yangyifei03@kuaishou.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As the one caller now has a folio, pass it in and use it. Removes three
calls to compound_head().
Link: https://lkml.kernel.org/r/20230715042343.434588-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
walk_page_range() and friends often operate under write-locked mmap_lock.
With introduction of vma locks, the vmas have to be locked as well during
such walks to prevent concurrent page faults in these areas. Add an
additional member to mm_walk_ops to indicate locking requirements for the
walk.
The change ensures that page walks which prevent concurrent page faults
by write-locking mmap_lock, operate correctly after introduction of
per-vma locks. With per-vma locks page faults can be handled under vma
lock without taking mmap_lock at all, so write locking mmap_lock would
not stop them. The change ensures vmas are properly locked during such
walks.
A sample issue this solves is do_mbind() performing queue_pages_range()
to queue pages for migration. Without this change a concurrent page
can be faulted into the area and be left out of migration.
Link: https://lkml.kernel.org/r/20230804152724.3090321-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Suggested-by: Jann Horn <jannh@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When pagetable lock is held, the page will always be page_mapped(). So
remove unneeded page_mapped() check. Also the page can't be freed from
under us in this case. So use get_page() to get extra page reference to
simplify the code. No functional change intended.
Link: https://lkml.kernel.org/r/20230717113644.3026478-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since commit 5660048ccac8 ("mm: move memcg hierarchy reclaim to generic
reclaim code"), mem_cgroup_hierarchical_reclaim() is already renamed to
mem_cgroup_soft_reclaim(). Update the corresponding comment.
Link: https://lkml.kernel.org/r/20230713121432.273381-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
MEM_CGROUP_ID_MAX is only used when CONFIG_MEMCG is configured. So remove
unneeded !CONFIG_MEMCG variant. Also it's only used in
mem_cgroup_alloc(), so move it from memcontrol.h to memcontrol.c. And
further define it as:
#define MEM_CGROUP_ID_MAX ((1UL << MEM_CGROUP_ID_SHIFT) - 1)
so if someone changes MEM_CGROUP_ID_SHIFT in the future, then
MEM_CGROUP_ID_MAX will be updated accordingly, as suggested by Muchun.
Link: https://lkml.kernel.org/r/20230708023304.1184111-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kmem.limit_in_bytes (v1 way to limit kernel memory usage) has been
deprecated since 58056f77502f ("memcg, kmem: further deprecate
kmem.limit_in_bytes") merged in 5.16. We haven't heard about any serious
users since then but it seems that the mere presence of the file is
causing more harm thatn good. We (SUSE) have had several bug reports from
customers where Docker based containers started to fail because a write to
kmem.limit_in_bytes has failed.
This was unexpected because runc code only expects ENOENT (kmem disabled)
or EBUSY (tasks already running within cgroup). So a new error code was
unexpected and the whole container startup failed. This has been later
addressed by
https://github.com/opencontainers/runc/commit/52390d68040637dfc77f9fda6bbe70952423d380
so current Docker runtimes do not suffer from the problem anymore. There
are still older version of Docker in use and likely hard to get rid of
completely.
Address this by wiping out the file completely and effectively get back to
pre 4.5 era and CONFIG_MEMCG_KMEM=n configuration.
I would recommend backporting to stable trees which have picked up
58056f77502f ("memcg, kmem: further deprecate kmem.limit_in_bytes").
[mhocko@suse.com: restore _KMEM switch case]
Link: https://lkml.kernel.org/r/ZKe5wxdbvPi5Cwd7@dhcp22.suse.cz
Link: https://lkml.kernel.org/r/20230704115240.14672-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mem_cgroup_init() request for allocations from each possible node, and
it's used to be a problem because NODE_DATA is not allocated for offline
node. Things have already changed since commit 09f49dca570a9 ("mm: handle
uninitialized numa nodes gracefully"), so it's unnecessary to check for
!node_online nodes here.
How to test?
qemu-system-x86_64 \
-kernel vmlinux \
-initrd full.rootfs.cpio.gz \
-append "console=ttyS0,115200 root=/dev/ram0 nokaslr earlyprintk=serial oops=panic panic_on_warn" \
-drive format=qcow2,file=vm_disk.qcow2,media=disk,if=ide \
-enable-kvm \
-cpu host \
-m 8G,slots=2,maxmem=16G \
-smp cores=4,threads=1,sockets=2 \
-object memory-backend-ram,id=mem0,size=4G \
-object memory-backend-ram,id=mem1,size=4G \
-numa node,memdev=mem0,cpus=0-3,nodeid=0 \
-numa node,memdev=mem1,cpus=4-7,nodeid=1 \
-numa node,nodeid=2 \
-net nic,model=virtio,macaddr=52:54:00:12:34:58 \
-net user \
-nographic \
-rtc base=localtime \
-gdb tcp::6000
Guest state when booting:
[ 0.048881] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[ 0.050489] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
[ 0.052173] NODE_DATA(0) allocated [mem 0x13fffc000-0x13fffffff]
[ 0.053164] NODE_DATA(1) allocated [mem 0x23fffa000-0x23fffdfff]
[ 0.054187] Zone ranges:
[ 0.054587] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.055551] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.056515] Normal [mem 0x0000000100000000-0x000000023fffffff]
[ 0.057484] Movable zone start for each node
[ 0.058149] Early memory node ranges
[ 0.058705] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.059679] node 0: [mem 0x0000000000100000-0x00000000bffdffff]
[ 0.060659] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.061649] node 1: [mem 0x0000000140000000-0x000000023fffffff]
[ 0.062638] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.063745] Initmem setup node 1 [mem 0x0000000140000000-0x000000023fffffff]
[ 0.064855] DMA zone: 158 reserved pages exceeds freesize 0
[ 0.065746] Initializing node 2 as memoryless
[ 0.066437] Initmem setup node 2 as memoryless
[ 0.067132] DMA zone: 158 reserved pages exceeds freesize 0
[ 0.068037] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.068265] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.124755] On node 0, zone Normal: 32 pages in unavailable ranges
cat /sys/devices/system/node/online
0-1
cat /sys/devices/system/node/possible
0-2
Link: https://lkml.kernel.org/r/20230619130442.2487-1-haifeng.xu@shopee.com
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
No user checks the return value of mem_cgroup_scan_tasks(). Make the
return value void.
Link: https://lkml.kernel.org/r/20230616063030.977586-1-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since commit c7c3dec1c9db ("mm: rmap: remove lock_page_memcg()"),
no more user, kill lock_page_memcg() and unlock_page_memcg().
Link: https://lkml.kernel.org/r/20230614143612.62575-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Following the examples of nearby code, various functions can just give up
if pte_offset_map() or pte_offset_map_lock() fails. And there's no need
for a preliminary pmd_trans_unstable() or other such check, since such
cases are now safely handled inside.
Link: https://lkml.kernel.org/r/7b9bd85d-1652-cbf2-159d-f503b45e5b@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use helper macro FLUSH_TIME to indicate the flush time to improve the
readability a bit. No functional change intended.
Link: https://lkml.kernel.org/r/20230603072116.1101690-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch is similar to commit 8e20d4b33266 ("mm/memcontrol: export
memcg->watermark via sysfs for v2 memcg"), but exports the swap counter's
watermark.
We allocate jobs to our compute farm using heuristics determined by memory
and swap usage from previous jobs. Tracking the peak swap usage for new
jobs is important for determining when jobs are exceeding their expected
bounds, or when our baseline metrics are getting outdated.
Our toolset was written to use the "memory.memsw.max_usage_in_bytes" file
in cgroups v1, and altering it to poll cgroups v2's "memory.swap.current"
would give less accurate results as well as add complication to the code.
Having this watermark exposed in sysfs is much preferred.
Link: https://lkml.kernel.org/r/20230524181734.125696-1-lars@pixar.com
Signed-off-by: Lars R. Damerow <lars@pixar.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
lru_gen_soft_reclaim() gets the lruvec from the memcg and node ID to keep a
cleaner interface on the caller side.
Link: https://lkml.kernel.org/r/20230522112058.2965866-2-talumbau@google.com
Signed-off-by: T.J. Alumbaugh <talumbau@google.com>
Reviewed-by: Yuanchu Xie <yuanchu@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace 'then' with 'than'.
Link: https://lkml.kernel.org/r/20230522095233.4246-1-haifeng.xu@shopee.com
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Before commit 29ef680ae7c2 ("memcg, oom: move out_of_memory back to the
charge path"), all memcg oom killers were delayed to page fault path. And
the explicit wakeup is used in this case:
thread A:
...
if (locked) { // complete oom-kill, hold the lock
mem_cgroup_oom_unlock(memcg);
...
}
...
thread B:
...
if (locked && !memcg->oom_kill_disable) {
...
} else {
schedule(); // can't acquire the lock
...
}
...
The reason is that thread A kicks off the OOM-killer, which leads to
wakeups from the uncharges of the exiting task. But thread B is not
guaranteed to see them if it enters the OOM path after the OOM kills but
before thread A releases the lock.
Now only oom_kill_disable case is handled from the #PF path. In that case
it is userspace to trigger the wake up not the #PF path itself. All
potential paths to free some charges are responsible to call
memcg_oom_recover() , so the explicit wakeup is not needed in the
mem_cgroup_oom_synchronize() path which doesn't release any memory itself.
Link: https://lkml.kernel.org/r/20230419030739.115845-2-haifeng.xu@shopee.com
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mem_cgroup_oom_synchronize() is only used when the memcg oom handling is
handed over to the edge of the #PF path. Since commit 29ef680ae7c2
("memcg, oom: move out_of_memory back to the charge path") this is the
case only when the kernel memcg oom killer is disabled
(current->memcg_in_oom is only set if memcg->oom_kill_disable). Therefore
a check for oom_kill_disable in mem_cgroup_oom_synchronize() is not
required.
Link: https://lkml.kernel.org/r/20230419030739.115845-1-haifeng.xu@shopee.com
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Previous patches removed all callers of mem_cgroup_flush_stats_atomic().
Remove the function and simplify the code.
Link: https://lkml.kernel.org/r/20230421174020.2994750-5-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, we approximate the root usage by adding the memcg stats for
anon, file, and conditionally swap (for memsw). To read the memcg stats
we need to invoke an rstat flush. rstat flushes can be expensive, they
scale with the number of cpus and cgroups on the system.
mem_cgroup_usage() is called by memcg_events()->mem_cgroup_threshold()
with irqs disabled, so such an expensive operation with irqs disabled can
cause problems.
Instead, approximate the root usage from global state. This is not 100%
accurate, but the root usage has always been ill-defined anyway.
Link: https://lkml.kernel.org/r/20230421174020.2994750-4-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The previous patch moved the wb_over_bg_thresh()->mem_cgroup_wb_stats()
code path in wb_writeback() outside the lock section. We no longer need
to flush the stats atomically. Flush the stats non-atomically.
Link: https://lkml.kernel.org/r/20230421174020.2994750-3-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "memcg: OOM log improvements", v2.
This short patch series brings back some cgroup v1 stats in OOM logs
that were unnecessarily changed before. It also makes memcg OOM logs
less reliant on printk() internals.
This patch (of 2):
Commit c8713d0b2312 ("mm: memcontrol: dump memory.stat during cgroup OOM")
made sure we dump all the stats in memory.stat during a cgroup OOM, but it
also introduced a slight behavioral change. The code used to print the
non-hierarchical v1 cgroup stats for the entire cgroup subtree, now it
only prints the v2 cgroup stats for the cgroup under OOM.
For cgroup v1 users, this introduces a few problems:
(a) The non-hierarchical stats of the memcg under OOM are no longer
shown.
(b) A couple of v1-only stats (e.g. pgpgin, pgpgout) are no longer
shown.
(c) We show the list of cgroup v2 stats, even in cgroup v1. This list
of stats is not tracked with v1 in mind. While most of the stats seem
to be working on v1, there may be some stats that are not fully or
correctly tracked.
Although OOM log is not set in stone, we should not change it for no
reason. When upgrading the kernel version to a version including commit
c8713d0b2312 ("mm: memcontrol: dump memory.stat during cgroup OOM"), these
behavioral changes are noticed in cgroup v1.
The fix is simple. Commit c8713d0b2312 ("mm: memcontrol: dump memory.stat
during cgroup OOM") separated stats formatting from stats display for v2,
to reuse the stats formatting in the OOM logs. Do the same for v1.
Move the v2 specific formatting from memory_stat_format() to
memcg_stat_format(), add memcg1_stat_format() for v1, and make
memory_stat_format() select between them based on cgroup version. Since
memory_stat_show() now works for both v1 & v2, drop memcg_stat_show().
Link: https://lkml.kernel.org/r/20230428132406.2540811-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20230428132406.2540811-3-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, we format all the memcg stats into a buffer in
mem_cgroup_print_oom_meminfo() and use pr_info() to dump it to the logs.
However, this buffer is large in size. Although it is currently working
as intended, ther is a dependency between the memcg stats buffer and the
printk record size limit.
If we add more stats in the future and the buffer becomes larger than the
printk record size limit, or if the prink record size limit is reduced,
the logs may be truncated.
It is safer to use seq_buf_do_printk(), which will automatically break up
the buffer at line breaks and issue small printk() calls.
Refactor the code to move the seq_buf from memory_stat_format() to its
callers, and use seq_buf_do_printk() to print the seq_buf in
mem_cgroup_print_oom_meminfo().
Link: https://lkml.kernel.org/r/20230428132406.2540811-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A memcg pointer in the percpu stock can be accessed by drain_all_stock()
from another cpu in a lockless way. In theory it might lead to an issue,
similar to the one which has been discovered with stock->cached_objcg,
where the pointer was zeroed between the check for being NULL and
dereferencing. In this case the issue is unlikely a real problem, but to
make it bulletproof and similar to stock->cached_objcg, let's annotate all
accesses to stock->cached with READ_ONCE()/WTRITE_ONCE().
Link: https://lkml.kernel.org/r/20230502160839.361544-2-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
KCSAN found an issue in obj_stock_flush_required():
stock->cached_objcg can be reset between the check and dereference:
==================================================================
BUG: KCSAN: data-race in drain_all_stock / drain_obj_stock
write to 0xffff888237c2a2f8 of 8 bytes by task 19625 on cpu 0:
drain_obj_stock+0x408/0x4e0 mm/memcontrol.c:3306
refill_obj_stock+0x9c/0x1e0 mm/memcontrol.c:3340
obj_cgroup_uncharge+0xe/0x10 mm/memcontrol.c:3408
memcg_slab_free_hook mm/slab.h:587 [inline]
__cache_free mm/slab.c:3373 [inline]
__do_kmem_cache_free mm/slab.c:3577 [inline]
kmem_cache_free+0x105/0x280 mm/slab.c:3602
__d_free fs/dcache.c:298 [inline]
dentry_free fs/dcache.c:375 [inline]
__dentry_kill+0x422/0x4a0 fs/dcache.c:621
dentry_kill+0x8d/0x1e0
dput+0x118/0x1f0 fs/dcache.c:913
__fput+0x3bf/0x570 fs/file_table.c:329
____fput+0x15/0x20 fs/file_table.c:349
task_work_run+0x123/0x160 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop+0xcf/0xe0 kernel/entry/common.c:171
exit_to_user_mode_prepare+0x6a/0xa0 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x26/0x140 kernel/entry/common.c:296
do_syscall_64+0x4d/0xc0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888237c2a2f8 of 8 bytes by task 19632 on cpu 1:
obj_stock_flush_required mm/memcontrol.c:3319 [inline]
drain_all_stock+0x174/0x2a0 mm/memcontrol.c:2361
try_charge_memcg+0x6d0/0xd10 mm/memcontrol.c:2703
try_charge mm/memcontrol.c:2837 [inline]
mem_cgroup_charge_skmem+0x51/0x140 mm/memcontrol.c:7290
sock_reserve_memory+0xb1/0x390 net/core/sock.c:1025
sk_setsockopt+0x800/0x1e70 net/core/sock.c:1525
udp_lib_setsockopt+0x99/0x6c0 net/ipv4/udp.c:2692
udp_setsockopt+0x73/0xa0 net/ipv4/udp.c:2817
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3668
__sys_setsockopt+0x1c3/0x230 net/socket.c:2271
__do_sys_setsockopt net/socket.c:2282 [inline]
__se_sys_setsockopt net/socket.c:2279 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2279
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0xffff8881382d52c0 -> 0xffff888138893740
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 19632 Comm: syz-executor.0 Not tainted 6.3.0-rc2-syzkaller-00387-g534293368afa #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
Fix it by using READ_ONCE()/WRITE_ONCE() for all accesses to
stock->cached_objcg.
Link: https://lkml.kernel.org/r/20230502160839.361544-1-roman.gushchin@linux.dev
Fixes: bf4f059954dc ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: syzbot+774c29891415ab0fd29d@syzkaller.appspotmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/linux-mm/CACT4Y+ZfucZhM60YPphWiCLJr6+SGFhT+jjm8k1P-a_8Kkxsjg@mail.gmail.com/T/#t
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In a kernel with added WARN_ON_ONCE(PageTail) in page_memcg_check(), we
observed a warning from page_cgroup_ino() when reading /proc/kpagecgroup.
This warning was added to catch fragile reads of a page memcg. Make
page_cgroup_ino() get memcg from the page's folio using
folio_memcg_check(): that gives it the correct memcg for each page of a
folio, so is the right fix.
Note that page_folio() is racy, the page's folio can change from under us,
but the entire function is racy and documented as such.
I dithered between the right fix and the safer "fix": it's unlikely but
conceivable that some userspace has learnt that /proc/kpagecgroup gives no
memcg on tail pages, and compensates for that in some (racy) way: so
continuing to give no memcg on tails, without warning, might be safer.
But hwpoison_filter_task(), the only other user of page_cgroup_ino(),
persuaded me. It looks as if it currently leaves out tail pages of the
selected memcg, by mistake: whereas hwpoison_inject() uses compound_head()
and expects the tails to be included. So hwpoison testing coverage has
probably been restricted by the wrong output from page_cgroup_ino() (if
that memcg filter is used at all): in the short term, it might be safer
not to enable wider coverage there, but long term we would regret that.
This is based on a patch originally written by Hugh Dickins and retains
most of the original commit log [1]
The patch was changed to use folio_memcg_check(page_folio(page)) instead
of page_memcg_check(compound_head(page)) based on discussions with Matthew
Wilcox; where he stated that callers of page_memcg_check() should stop
using it due to the ambiguity around tail pages -- instead they should use
folio_memcg_check() and handle tail pages themselves.
Link: https://lkml.kernel.org/r/20230412003451.4018887-1-yosryahmed@google.com
Link: https://lore.kernel.org/linux-mm/20230313083452.1319968-1-yosryahmed@google.com/ [1]
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
cgroups v1 has a unique way of setting up memory pressure notifications:
the user opens "memory.pressure_level" of the cgroup they want to monitor
for pressure, then open "cgroup.event_control" and write the fd (among
other things) to that file. memory.pressure_level has no other use,
specifically it does not support any read or write operations.
Consequently, no handlers are provided, and cgroup_file_mode() sets the
permissions to 000. However, to actually use the mechanism, the
subscribing user must have read access to the file and open the fd for
reading, see memcg_write_event_control().
This is all fine as long as the subscribing process runs as root and is
otherwise unconfined by further restrictions. However, if you add strict
access controls such as selinux, the permission bits will be enforced, and
opening memory.pressure_level for reading will fail, preventing the
process from subscribing, even as root.
To work around this issue, introduce a dummy read handler. When
memory.pressure_level is created, cgroup_file_mode() will notice the
existence of a handler, and therefore add read permissions to the file.
Link: https://lkml.kernel.org/r/20230404105900.2005-1-flosch@nutanix.com
Signed-off-by: Florian Schmidt <flosch@nutanix.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In some situations, we may end up calling memcg_rstat_updated() with a
value of 0, which means the stat was not actually updated. An example is
if we fail to reclaim any pages in shrink_folio_list().
Do not add the cgroup to the rstat updated tree in this case, to avoid
unnecessarily flushing it.
Link: https://lkml.kernel.org/r/20230330191801.1967435-9-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In workingset_refault(), we call
mem_cgroup_flush_stats_atomic_ratelimited() to read accurate stats within
an RCU read section and with sleeping disallowed. Move the call above the
RCU read section to make it non-atomic.
Flushing is an expensive operation that scales with the number of cpus and
the number of cgroups in the system, so avoid doing it atomically where
possible.
Since workingset_refault() is the only caller of
mem_cgroup_flush_stats_atomic_ratelimited(), just make it non-atomic, and
rename it to mem_cgroup_flush_stats_ratelimited().
Link: https://lkml.kernel.org/r/20230330191801.1967435-7-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, all contexts that flush memcg stats do so with sleeping not
allowed. Some of these contexts are perfectly safe to sleep in, such as
reading cgroup files from userspace or the background periodic flusher.
Flushing is an expensive operation that scales with the number of cpus and
the number of cgroups in the system, so avoid doing it atomically where
possible.
Refactor the code to make mem_cgroup_flush_stats() non-atomic (aka
sleepable), and provide a separate atomic version. The atomic version is
used in reclaim, refault, writeback, and in mem_cgroup_usage(). All other
code paths are left to use the non-atomic version. This includes
callbacks for userspace reads and the periodic flusher.
Since refault is the only caller of mem_cgroup_flush_stats_ratelimited(),
change it to mem_cgroup_flush_stats_atomic_ratelimited(). Reclaim and
refault code paths are modified to do non-atomic flushing in separate
later patches -- so it will eventually be changed back to
mem_cgroup_flush_stats_ratelimited().
Link: https://lkml.kernel.org/r/20230330191801.1967435-6-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As Johannes notes in [1], stats_flush_lock is currently used to:
(a) Protect updated to stats_flush_threshold.
(b) Protect updates to flush_next_time.
(c) Serializes calls to cgroup_rstat_flush() based on those ratelimits.
However:
1. stats_flush_threshold is already an atomic
2. flush_next_time is not atomic. The writer is locked, but the reader
is lockless. If the reader races with a flush, you could see this:
if (time_after(jiffies, flush_next_time))
spin_trylock()
flush_next_time = now + delay
flush()
spin_unlock()
spin_trylock()
flush_next_time = now + delay
flush()
spin_unlock()
which means we already can get flushes at a higher frequency than
FLUSH_TIME during races. But it isn't really a problem.
The reader could also see garbled partial updates if the compiler
decides to split the write, so it needs at least READ_ONCE and
WRITE_ONCE protection.
3. Serializing cgroup_rstat_flush() calls against the ratelimit
factors is currently broken because of the race in 2. But the race
is actually harmless, all we might get is the occasional earlier
flush. If there is no delta, the flush won't do much. And if there
is, the flush is justified.
So the lock can be removed all together. However, the lock also served
the purpose of preventing a thundering herd problem for concurrent
flushers, see [2]. Use an atomic instead to serve the purpose of
unifying concurrent flushers.
[1]https://lore.kernel.org/lkml/20230323172732.GE739026@cmpxchg.org/
[2]https://lore.kernel.org/lkml/20210716212137.1391164-2-shakeelb@google.com/
Link: https://lkml.kernel.org/r/20230330191801.1967435-5-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, the only context in which we can invoke an rstat flush from irq
context is through mem_cgroup_usage() on the root memcg when called from
memcg_check_events(). An rstat flush is an expensive operation that
should not be done in irq context, so do not flush stats and use the stale
stats in this case.
Arguably, usage threshold events are not reliable on the root memcg anyway
since its usage is ill-defined.
Link: https://lkml.kernel.org/r/20230330191801.1967435-4-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mem_cgroup_flush_stats_delayed() suggests his is using a delayed_work, but
this is actually sometimes flushing directly from the callsite.
What it's doing is ratelimited calls. A better name would be
mem_cgroup_flush_stats_ratelimited().
Link: https://lkml.kernel.org/r/20230330191801.1967435-3-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "memcg: avoid flushing stats atomically where possible", v3.
rstat flushing is an expensive operation that scales with the number of
cpus and the number of cgroups in the system. The purpose of this series
is to minimize the contexts where we flush stats atomically.
Patches 1 and 2 are cleanups requested during reviews of prior versions of
this series.
Patch 3 makes sure we never try to flush from within an irq context.
Patches 4 to 7 introduce separate variants of mem_cgroup_flush_stats() for
atomic and non-atomic flushing, and make sure we only flush the stats
atomically when necessary.
Patch 8 is a slightly tangential optimization that limits the work done by
rstat flushing in some scenarios.
This patch (of 8):
cgroup_rstat_flush_irqsafe() can be a confusing name. It may read as
"irqs are disabled throughout", which is what the current implementation
does (currently under discussion [1]), but is not the intention. The
intention is that this function is safe to call from atomic contexts.
Name it as such.
Link: https://lkml.kernel.org/r/20230330191801.1967435-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20230330191801.1967435-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Leonardo Bras has noticed that pcp charge cache draining might be
disruptive on workloads relying on 'isolated cpus', a feature commonly
used on workloads that are sensitive to interruption and context switching
such as vRAN and Industrial Control Systems.
There are essentially two ways how to approach the issue. We can either
allow the pcp cache to be drained on a different rather than a local cpu
or avoid remote flushing on isolated cpus.
The current pcp charge cache is really optimized for high performance and
it always relies to stick with its cpu. That means it only requires
local_lock (preempt_disable on !RT) and draining is handed over to pcp WQ
to drain locally again.
The former solution (remote draining) would require to add an additional
locking to prevent local charges from racing with the draining. This adds
an atomic operation to otherwise simple arithmetic fast path in the
try_charge path. Another concern is that the remote draining can cause a
lock contention for the isolated workloads and therefore interfere with it
indirectly via user space interfaces.
Another option is to avoid draining scheduling on isolated cpus
altogether. That means that those remote cpus would keep their charges
even after drain_all_stock returns. This is certainly not optimal either
but it shouldn't really cause any major problems. In the worst case (many
isolated cpus with charges - each of them with MEMCG_CHARGE_BATCH i.e 64
page) the memory consumption of a memcg would be artificially higher than
can be immediately used from other cpus.
Theoretically a memcg OOM killer could be triggered pre-maturely.
Currently it is not really clear whether this is a practical problem
though. Tight memcg limit would be really counter productive to cpu
isolated workloads pretty much by definition because any memory reclaimed
induced by memcg limit could break user space timing expectations as those
usually expect execution in the userspace most of the time.
Also charges could be left behind on memcg removal. Any future charge on
those isolated cpus will drain that pcp cache so this won't be a permanent
leak.
Considering cons and pros of both approaches this patch is implementing
the second option and simply do not schedule remote draining if the target
cpu is isolated. This solution is much more simpler. It doesn't add any
new locking and it is more more predictable from the user space POV.
Should the pre-mature memcg OOM become a real life problem, we can revisit
this decision.
[akpm@linux-foundation.org: memcontrol.c needs sched/isolation.h]
Link: https://lore.kernel.org/oe-kbuild-all/202303180617.7E3aIlHf-lkp@intel.com/
Link: https://lkml.kernel.org/r/20230317134448.11082-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: Leonardo Bras <leobras@redhat.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of returning NULL for all errors, distinguish between:
- no entry found and not asked to allocated (-ENOENT)
- failed to allocate memory (-ENOMEM)
- would block (-EAGAIN)
so that callers don't have to guess the error based on the passed in
flags.
Also pass through the error through the direct callers: filemap_get_folio,
filemap_lock_folio filemap_grab_folio and filemap_get_incore_folio.
[hch@lst.de: fix null-pointer deref]
Link: https://lkml.kernel.org/r/20230310070023.GA13563@lst.de
Link: https://lkml.kernel.org/r/20230310043137.GA1624890@u2004
Link: https://lkml.kernel.org/r/20230307143410.28031-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nilfs2]
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The knob for cgroup v1 memory controller: memory.soft_limit_in_bytes is
not protected by any locking so it can be modified while it is used. This
is not an actual problem because races are unlikely. But it is better to
use [READ|WRITE]_ONCE to prevent compiler from doing anything funky.
The access of memcg->soft_limit is lockless, so it can be concurrently set
at the same time as we are trying to read it. All occurrences of
memcg->soft_limit are updated with [READ|WRITE]_ONCE.
[findns94@gmail.com: v3]
Link: https://lkml.kernel.org/r/20230308162555.14195-5-findns94@gmail.com
Link: https://lkml.kernel.org/r/20230306154138.3775-5-findns94@gmail.com
Signed-off-by: Yue Zhao <findns94@gmail.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tang Yizhou <tangyeechou@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The knob for cgroup v1 memory controller: memory.oom_control is not
protected by any locking so it can be modified while it is used. This is
not an actual problem because races are unlikely. But it is better to use
[READ|WRITE]_ONCE to prevent compiler from doing anything funky.
The access of memcg->oom_kill_disable is lockless, so it can be
concurrently set at the same time as we are trying to read it. All
occurrences of memcg->oom_kill_disable are updated with [READ|WRITE]_ONCE.
[findns94@gmail.com: v3]
Link: https://lkml.kernel.org/r/20230308162555.14195-4-findns94@gmail.com
Link: https://lkml.kernel.org/r/20230306154138.377-4-findns94@gmail.com
Signed-off-by: Yue Zhao <findns94@gmail.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tang Yizhou <tangyeechou@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The knob for cgroup v1 memory controller: memory.swappiness is not
protected by any locking so it can be modified while it is used. This is
not an actual problem because races are unlikely. But it is better to use
[READ|WRITE]_ONCE to prevent compiler from doing anything funky.
The access of memcg->swappiness and vm_swappiness is lockless, so both of
them can be concurrently set at the same time as we are trying to read
them. All occurrences of memcg->swappiness and vm_swappiness are updated
with [READ|WRITE]_ONCE.
[findns94@gmail.com: v3]
Link: https://lkml.kernel.org/r/20230308162555.14195-3-findns94@gmail.com
Link: https://lkml.kernel.org/r/20230306154138.3775-3-findns94@gmail.com
Signed-off-by: Yue Zhao <findns94@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tang Yizhou <tangyeechou@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm, memcg: cgroup v1 and v2 tunable load/store tearing
fixes", v2.
This patch series helps to prevent load/store tearing in
several cgroup knobs.
As kindly pointed out by Michal Hocko and Roman Gushchin
, the changelog has been rephrased.
Besides, more knobs were checked, according to kind suggestions
from Shakeel Butt and Muchun Song.
This patch (of 4):
The knob for cgroup v2 memory controller: memory.oom.group
is not protected by any locking so it can be modified while it is used.
This is not an actual problem because races are unlikely (the knob is
usually configured long before any workloads hits actual memcg oom)
but it is better to use READ_ONCE/WRITE_ONCE to prevent compiler from
doing anything funky.
The access of memcg->oom_group is lockless, so it can be
concurrently set at the same time as we are trying to read it.
Link: https://lkml.kernel.org/r/20230306154138.3775-1-findns94@gmail.com
Link: https://lkml.kernel.org/r/20230306154138.3775-2-findns94@gmail.com
Signed-off-by: Yue Zhao <findns94@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tang Yizhou <tangyeechou@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
