| Age | Commit message (Collapse) | Author |
|---|
|
When CONFIG_DAMON_VADDR_KUNIT_TEST=y and making CONFIG_DEBUG_KMEMLEAK=y
and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, the below memory leak is detected.
Since commit 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary
variables"), the damon_destroy_ctx() is removed, but still call
damon_new_target() and damon_new_region(), the damon_region which is
allocated by kmem_cache_alloc() in damon_new_region() and the damon_target
which is allocated by kmalloc in damon_new_target() are not freed. And
the damon_region which is allocated in damon_new_region() in
damon_set_regions() is also not freed.
So use damon_destroy_target to free all the damon_regions and damon_target.
unreferenced object 0xffff888107c9a940 (size 64):
comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk
60 c7 9c 07 81 88 ff ff f8 cb 9c 07 81 88 ff ff `...............
backtrace:
[<ffffffff817e0167>] kmalloc_trace+0x27/0xa0
[<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0
[<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0
[<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff8881079cc740 (size 56):
comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s)
hex dump (first 32 bytes):
05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................
6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk
backtrace:
[<ffffffff819bc492>] damon_new_region+0x22/0x1c0
[<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0
[<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888107c9ac40 (size 64):
comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk
a0 cc 9c 07 81 88 ff ff 78 a1 76 07 81 88 ff ff ........x.v.....
backtrace:
[<ffffffff817e0167>] kmalloc_trace+0x27/0xa0
[<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0
[<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0
[<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff8881079ccc80 (size 56):
comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s)
hex dump (first 32 bytes):
05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................
6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk
backtrace:
[<ffffffff819bc492>] damon_new_region+0x22/0x1c0
[<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0
[<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888107c9af40 (size 64):
comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.011s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk
20 a2 76 07 81 88 ff ff b8 a6 76 07 81 88 ff ff .v.......v.....
backtrace:
[<ffffffff817e0167>] kmalloc_trace+0x27/0xa0
[<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0
[<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0
[<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810776a200 (size 56):
comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.011s)
hex dump (first 32 bytes):
05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................
6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk
backtrace:
[<ffffffff819bc492>] damon_new_region+0x22/0x1c0
[<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0
[<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810776a740 (size 56):
comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.025s)
hex dump (first 32 bytes):
3d 00 00 00 00 00 00 00 3f 00 00 00 00 00 00 00 =.......?.......
6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk
backtrace:
[<ffffffff819bc492>] damon_new_region+0x22/0x1c0
[<ffffffff819bfcc2>] damon_set_regions+0x4c2/0x8e0
[<ffffffff819c7dbb>] damon_do_test_apply_three_regions.constprop.0+0xfb/0x3e0
[<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888108038240 (size 64):
comm "kunit_try_catch", pid 1075, jiffies 4294670600 (age 733.022s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 03 00 00 00 6b 6b 6b 6b ............kkkk
48 ad 76 07 81 88 ff ff 98 ae 76 07 81 88 ff ff H.v.......v.....
backtrace:
[<ffffffff817e0167>] kmalloc_trace+0x27/0xa0
[<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0
[<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0
[<ffffffff819c898d>] damon_test_apply_three_regions4+0x1cd/0x210
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810776ad28 (size 56):
comm "kunit_try_catch", pid 1075, jiffies 4294670600 (age 733.022s)
hex dump (first 32 bytes):
05 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 ................
6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk
backtrace:
[<ffffffff819bc492>] damon_new_region+0x22/0x1c0
[<ffffffff819bfcc2>] damon_set_regions+0x4c2/0x8e0
[<ffffffff819c7dbb>] damon_do_test_apply_three_regions.constprop.0+0xfb/0x3e0
[<ffffffff819c898d>] damon_test_apply_three_regions4+0x1cd/0x210
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
Link: https://lkml.kernel.org/r/20230925072100.3725620-1-ruanjinjie@huawei.com
Fixes: 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary variables")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
Extend DAMON sysfs interface to support the DAMON monitoring target based
DAMOS filter. Users can use it via writing 'target' to the filter's
'type' file and specifying the index of the target from the corresponding
DAMON context's monitoring targets list to 'target_idx' sysfs file.
Link: https://lkml.kernel.org/r/20230802214312.110532-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
One DAMON context can have multiple monitoring targets, and DAMOS schemes
are applied to all targets. In some cases, users need to apply different
scheme to different targets. Retrieving monitoring results via DAMON
sysfs interface' 'tried_regions' directory could be one good example.
Also, there could be cases that cgroup DAMOS filter is not enough. All
such use cases can be worked around by having multiple DAMON contexts
having only single target, but it is inefficient in terms of resource
usage, thogh the overhead is not estimated to be huge.
Implement DAMON monitoring target based DAMOS filter for the case. Like
address range target DAMOS filter, handle these filters in the DAMON core
layer, since it is more efficient than doing in operations set layer.
This also means that regions that filtered out by monitoring target type
DAMOS filters are counted as not tried by the scheme. Hence, target
granularity monitoring results retrieval via DAMON sysfs interface becomes
available.
Link: https://lkml.kernel.org/r/20230802214312.110532-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Implement a kunit test for the core of address range DAMOS filter
handling, namely __damos_filter_out(). The test especially focus on
regions that overlap with given filter's target address range.
Link: https://lkml.kernel.org/r/20230802214312.110532-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extend DAMON sysfs interface to support address range based DAMOS filters,
by adding a special keyword for the filter/<N>/type file, namely 'addr',
and two files under filter/<N>/ for specifying the start and the end
addresses of the range, namely 'addr_start' and 'addr_end'.
Link: https://lkml.kernel.org/r/20230802214312.110532-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Extend DAMOS filters for address ranges and DAMON monitoring
targets"
There are use cases that need to apply DAMOS schemes to specific address
ranges or DAMON monitoring targets. NUMA nodes in the physical address
space, special memory objects in the virtual address space, and monitoring
target specific efficient monitoring results snapshot retrieval could be
examples of such use cases. This patchset extends DAMOS filters feature
for such cases, by implementing two more filter types, namely address
ranges and DAMON monitoring types.
Patches sequence
----------------
The first seven patches are for the address ranges based DAMOS filter.
The first patch implements the filter feature and expose it via DAMON
kernel API. The second patch further expose the feature to users via
DAMON sysfs interface. The third and fourth patches implement unit tests
and selftests for the feature. Three patches (fifth to seventh) updating
the documents follow.
The following six patches are for the DAMON monitoring target based DAMOS
filter. The eighth patch implements the feature in the core layer and
expose it via DAMON's kernel API. The ninth patch further expose it to
users via DAMON sysfs interface. Tenth patch add a selftest, and two
patches (eleventh and twelfth) update documents.
[1] https://lore.kernel.org/damon/20230728203444.70703-1-sj@kernel.org/
This patch (of 13):
Users can know special characteristic of specific address ranges. NUMA
nodes or special objects or buffers in virtual address space could be such
examples. For such cases, DAMOS schemes could required to be applied to
only specific address ranges. Implement yet another type of DAMOS filter
for the purpose.
Note that the existing filter types, namely anon pages and memcg DAMOS
filters needed page level type check. Because such check can be done
efficiently in the opertions set layer, those filters are handled in
operations set layer. Specifically, only paddr operations set
implementation supports these filters. Also, because statistics counting
is done in the DAMON core layer, the regions that filtered out by these
filters are counted as tried but failed to the statistics.
Unlike those, address range based filters can efficiently handled in the
core layer. Hence, do the handling in the layer, and count the regions
that filtered out by those as the scheme has not tried for the region.
This difference should clearly documented.
Link: https://lkml.kernel.org/r/20230802214312.110532-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230802214312.110532-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Using tried_regions/total_bytes file, users can efficiently retrieve the
total size of memory regions having specific access pattern. However,
DAMON sysfs interface in kernel still populates all the infomration on the
tried_regions subdirectories. That means the kernel part overhead for the
construction of tried regions directories still exists. To remove the
overhead, implement yet another command input for 'state' DAMON sysfs
file. Writing the input to the file makes DAMON sysfs interface to update
only the total_bytes file.
Link: https://lkml.kernel.org/r/20230802213222.109841-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon/sysfs-schemes: implement DAMOS tried total bytes
file".
The tried_regions directory of DAMON sysfs interface is useful for
retrieving monitoring results snapshot or DAMOS debugging. However, for
common use case that need to monitor only the total size of the scheme
tried regions (e.g., monitoring working set size), the kernel overhead for
directory construction and user overhead for reading the content could be
high if the number of monitoring region is not small. This patchset
implements DAMON sysfs files for efficient support of the use case.
The first patch implements the sysfs file to reduce the user space
overhead, and the second patch implements a command for reducing the
kernel space overhead.
The third patch adds a selftest for the new file, and following two
patches update documents.
[1] https://lore.kernel.org/damon/20230728201817.70602-1-sj@kernel.org/
This patch (of 5):
The tried_regions directory can be used for retrieving the monitoring
results snapshot for regions of specific access pattern, by setting the
scheme's action as 'stat' and the access pattern as required. While the
interface provides every detail of the monitoring results, some use cases
including working set size monitoring requires only the total size of the
regions. For such cases, users should read all the information and
calculate the total size of the regions. However, it could incur high
overhead if the number of regions is high. Add a file for retrieving only
the information, namely 'total_bytes' file. It allows users to get the
total size by reading only the file.
Link: https://lkml.kernel.org/r/20230802213222.109841-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230802213222.109841-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damos_new_filter() was having a bug that not initializing ->list field of
the returning damos_filter struct, which results in access to
uninitialized memory. Add a unit test for the function.
Link: https://lkml.kernel.org/r/20230729203733.38949-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As ptep_get, Use the pmdp_get wrapper when we accessing pmdval instead of
directly dereferencing pmd.
Link: https://lkml.kernel.org/r/20230727212157.2985025-1-ppbuk5246@gmail.com
Signed-off-by: Levi Yun <ppbuk5246@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
walk_page_range() and friends often operate under write-locked mmap_lock.
With introduction of vma locks, the vmas have to be locked as well during
such walks to prevent concurrent page faults in these areas. Add an
additional member to mm_walk_ops to indicate locking requirements for the
walk.
The change ensures that page walks which prevent concurrent page faults
by write-locking mmap_lock, operate correctly after introduction of
per-vma locks. With per-vma locks page faults can be handled under vma
lock without taking mmap_lock at all, so write locking mmap_lock would
not stop them. The change ensures vmas are properly locked during such
walks.
A sample issue this solves is do_mbind() performing queue_pages_range()
to queue pages for migration. Without this change a concurrent page
can be faulted into the area and be left out of migration.
Link: https://lkml.kernel.org/r/20230804152724.3090321-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Suggested-by: Jann Horn <jannh@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damos_new_filter() is not initializing the list field of newly allocated
filter object. However, DAMON sysfs interface and DAMON_RECLAIM are not
initializing it after calling damos_new_filter(). As a result, accessing
uninitialized memory is possible. Actually, adding multiple DAMOS filters
via DAMON sysfs interface caused NULL pointer dereferencing. Initialize
the field just after the allocation from damos_new_filter().
Link: https://lkml.kernel.org/r/20230729203733.38949-2-sj@kernel.org
Fixes: 98def236f63c ("mm/damon/core: implement damos filter")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Running kunit test for 6.5-rc1 hits one bug:
ok 10 damon_test_update_monitoring_result
general protection fault, probably for non-canonical address 0x1bffa5c419cfb81: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 110 Comm: kunit_try_catch Tainted: G N 6.5.0-rc2 #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:damon_set_attrs+0xb9/0x120
Code: f8 00 00 00 4c 8d 58 e0 48 39 c3 74 ba 41 ba 59 17 b7 d1 49 8b 43 10 4d
8d 4b 10 48 8d 70 e0 49 39 c1 74 50 49 8b 40 08 31 d2 <69> 4e 18 10 27 00 00
49 f7 30 31 d2 48 89 c5 89 c8 f7 f5 31 d2 89
RSP: 0000:ffffc900005bfd40 EFLAGS: 00010246
RAX: ffffffff81159fc0 RBX: ffffc900005bfeb8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 01bffa5c419cfb69 RDI: ffffc900005bfd70
RBP: ffffc90000013c10 R08: ffffc900005bfdc0 R09: ffffffff81ff10ed
R10: 00000000d1b71759 R11: ffffffff81ff10dd R12: ffffc90000013a78
R13: ffff88810eb78180 R14: ffffffff818297c0 R15: ffffc90000013c28
FS: 0000000000000000(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000002a1c001 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
damon_test_set_attrs+0x63/0x1f0
kunit_generic_run_threadfn_adapter+0x17/0x30
kthread+0xfd/0x130
The problem seems to be related with the damon_ctx was used without
being initialized. Fix it by adding the initialization.
Link: https://lkml.kernel.org/r/20230718052811.1065173-1-feng.tang@intel.com
Fixes: aa13779be6b7 ("mm/damon/core-test: add a test for damon_set_attrs()")
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
Commit 5ff6e2fff88e ("mm/damon/core: fix divide error in
damon_nr_accesses_to_accesses_bp()") fixed a bug by adding arguments
validation in damon_set_attrs(). Add a unit test for the added validation
to ensure the bug cannot occur again.
Link: https://lkml.kernel.org/r/20230615183323.87561-1-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Simple walk_page_range() users should set ACTION_AGAIN to retry when
pte_offset_map_lock() fails.
No need to check pmd_trans_unstable(): that was precisely to avoid the
possiblity of calling pte_offset_map() on a racily removed or inserted THP
entry, but such cases are now safely handled inside it. Likewise there is
no need to check pmd_none() or pmd_bad() before calling it.
Link: https://lkml.kernel.org/r/c77d9d10-3aad-e3ce-4896-99e91c7947f3@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: SeongJae Park <sj@kernel.org> for mm/damon part
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Song Liu <song@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If 'aggr_interval' is smaller than 'sample_interval', max_nr_accesses in
damon_nr_accesses_to_accesses_bp() becomes zero which leads to divide
error, let's validate the values of them in damon_set_attrs() to fix it,
which similar to others attrs check.
Link: https://lkml.kernel.org/r/20230527032101.167788-1-wangkefeng.wang@huawei.com
Fixes: 2f5bef5a590b ("mm/damon/core: update monitoring results for new monitoring attributes")
Reported-by: syzbot+841a46899768ec7bec67@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=841a46899768ec7bec67
Link: https://lore.kernel.org/damon/00000000000055fc4e05fc975bc2@google.com/
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With the fix in place to atomically test and clear young on ptes and pmds,
simplify the code to handle the clearing for both the primary mmu and the
mmu notifier with a single API call.
Link: https://lkml.kernel.org/r/20230602092949.545577-4-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is racy to non-atomically read a pte, then clear the young bit, then
write it back as this could discard dirty information. Further, it is bad
practice to directly set a pte entry within a table. Instead clearing
young must go through the arch-provided helper,
ptep_test_and_clear_young() to ensure it is modified atomically and to
give the arch code visibility and allow it to check (and potentially
modify) the operation.
Link: https://lkml.kernel.org/r/20230602092949.545577-3-ryan.roberts@arm.com
Fixes: 3f49584b262c ("mm/damon: implement primitives for the virtual memory address spaces").
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The *folio_sz in damon_pa_young() will be used(as last_folio_sz) by
__damon_pa_check_access(), so it's need to be updated, fix missing branch.
Link: https://lkml.kernel.org/r/20230308083311.120951-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Omit one line by unified folio_put(), and make code more clear.
Link: https://lkml.kernel.org/r/20230308083311.120951-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon/paddr: minor code improvement", v3.
Unify folio_put() to make code more clear, and also fix minor issue in
damon_pa_young().
This patch (of 3):
Omit three lines by unified folio_put(), and make code more clear.
Link: https://lkml.kernel.org/r/20230308083311.120951-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20230308083311.120951-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the
driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
These structures were not constified in commit e56397e8c40d
("mm/damon/sysfs: make kobj_type structures constant") as they didn't
exist when that patch was written.
Link: https://lkml.kernel.org/r/20230324-b4-kobj_type-damon2-v1-1-48ddbf1c8fcf@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damon_pa_mark_accessed_or_deactivate()
damon_pa_mark_accessed_or_deactivate() is accessing a folio via
folio_nr_pages() after folio_put() for the folio has invoked. Fix it.
Link: https://lkml.kernel.org/r/20230304193949.296391-3-sj@kernel.org
Fixes: f70da5ee8fe1 ("mm/damon: convert damon_pa_mark_accessed_or_deactivate() to use folios")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon/paddr: Fix folio-use-after-put bugs".
There are two folio accesses after folio_put() in mm/damon/paddr.c file.
Fix those.
This patch (of 2):
damon_pa_young() is accessing a folio via folio_size() after folio_put()
for the folio has invoked. Fix it.
Link: https://lkml.kernel.org/r/20230304193949.296391-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230304193949.296391-2-sj@kernel.org
Fixes: 397b0c3a584b ("mm/damon/paddr: remove folio_sz field from damon_pa_access_chk_result")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: <stable@vger.kernel.org> [6.2.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damon_get_folio() would always increase folio _refcount and
folio_isolate_lru() would increase folio _refcount if the folio's lru flag
is set.
If an unevictable folio isolated successfully, there will be two more
_refcount. The one from folio_isolate_lru() will be decreased in
folio_puback_lru(), but the other one from damon_get_folio() will be left
behind. This causes a pin page.
Whatever the case, the _refcount from damon_get_folio() should be
decreased.
Link: https://lkml.kernel.org/r/20230222064223.6735-1-andrew.yang@mediatek.com
Fixes: 57223ac29584 ("mm/damon/paddr: support the pageout scheme")
Signed-off-by: andrew.yang <andrew.yang@mediatek.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.16.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Change the return value for page isolation functions", v3.
Now the page isolation functions did not return a boolean to indicate
success or not, instead it will return a negative error when failed
to isolate a page. So below code used in most places seem a boolean
success/failure thing, which can confuse people whether the isolation
is successful.
if (folio_isolate_lru(folio))
continue;
Moreover the page isolation functions only return 0 or -EBUSY, and
most users did not care about the negative error except for few users,
thus we can convert all page isolation functions to return a boolean
value, which can remove the confusion to make code more clear.
No functional changes intended in this patch series.
This patch (of 4):
Now the folio_isolate_lru() did not return a boolean value to indicate
isolation success or not, however below code checking the return value can
make people think that it was a boolean success/failure thing, which makes
people easy to make mistakes (see the fix patch[1]).
if (folio_isolate_lru(folio))
continue;
Thus it's better to check the negative error value expilictly returned by
folio_isolate_lru(), which makes code more clear per Linus's
suggestion[2]. Moreover Matthew suggested we can convert the isolation
functions to return a boolean[3], since most users did not care about the
negative error value, and can also remove the confusing of checking return
value.
So this patch converts the folio_isolate_lru() to return a boolean value,
which means return 'true' to indicate the folio isolation is successful,
and 'false' means a failure to isolation. Meanwhile changing all users'
logic of checking the isolation state.
No functional changes intended.
[1] https://lore.kernel.org/all/20230131063206.28820-1-Kuan-Ying.Lee@mediatek.com/T/#u
[2] https://lore.kernel.org/all/CAHk-=wiBrY+O-4=2mrbVyxR+hOqfdJ=Do6xoucfJ9_5az01L4Q@mail.gmail.com/
[3] https://lore.kernel.org/all/Y+sTFqwMNAjDvxw3@casper.infradead.org/
Link: https://lkml.kernel.org/r/cover.1676424378.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/8a4e3679ed4196168efadf7ea36c038f2f7d5aa9.1676424378.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON debugfs interface has announced to be deprecated after >v5.15 LTS
kernel is released. And, v6.1.y has announced to be an LTS[1].
Though the announcement was there for a while, some people might not
noticed that so far. Also, some users could depend on it and have
problems at movng to the alternative (DAMON sysfs interface).
For such cases, warn DAMON debugfs interface deprecation with contacts
to ask helps when any DAMON debugfs interface file is opened.
[1] https://git.kernel.org/pub/scm/docs/kernel/website.git/commit/?id=332e9121320bc7461b2d3a79665caf153e51732c
[sj@kernel.org: split DAMON debugfs file open warning message, per Randy]
Link: https://lkml.kernel.org/r/20230209192009.7885-4-sj@kernel.org
Link: https://lkml.kernel.org/r/20230210044838.63723-4-sj@kernel.org
Link: https://lkml.kernel.org/r/20230209192009.7885-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON debugfs interface has announced to be deprecated after >v5.15 LTS
kernel is released. And, v6.1.y has announced to be an LTS[1].
Though the announcement was there for a while, some people might not
noticed that so far. Also, some users could depend on it and have
problems at movng to the alternative (DAMON sysfs interface).
For such cases, note DAMON debugfs interface as deprecated, and contacts
to ask helps on the Kconfig.
[1] https://git.kernel.org/pub/scm/docs/kernel/website.git/commit/?id=332e9121320bc7461b2d3a79665caf153e51732c
Link: https://lkml.kernel.org/r/20230209192009.7885-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the
driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Link: https://lkml.kernel.org/r/20230207-kobj_type-damon-v1-1-9d4fea6a465b@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Prepare for the removal of the vma_mas_store() function by open coding the
maple tree store in this test code. Set the range of the maple state and
call the store function directly.
Link: https://lkml.kernel.org/r/20230120162650.984577-31-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a simple unit test for damon_update_monitoring_results() function.
Link: https://lkml.kernel.org/r/20230119013831.1911-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
region->nr_accesses is the number of sampling intervals in the last
aggregation interval that access to the region has found, and region->age
is the number of aggregation intervals that its access pattern has
maintained. Hence, the real meaning of the two fields' values is
depending on current sampling and aggregation intervals.
This means the values need to be updated for every sampling and/or
aggregation intervals updates. As DAMON core doesn't, it is a duty of
in-kernel DAMON framework applications like DAMON sysfs interface, or the
userspace users.
Handling it in userspace or in-kernel DAMON application is complicated,
inefficient, and repetitive compared to doing the update in DAMON core.
Do the update in DAMON core.
Link: https://lkml.kernel.org/r/20230119013831.1911-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Sometimes there is no scheme in damon's context, for example just use damo
record to monitor workload's data access pattern.
If current damon context doesn't have any scheme in the list, kdamond has
no need to iterate over list of all targets and regions but do nothing.
So, skip apply schemes when ctx->schemes is empty.
Link: https://lkml.kernel.org/r/20230116062347.1148553-1-huaisheng.ye@intel.com
Signed-off-by: Huaisheng Ye <huaisheng.ye@intel.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL-terminated strings.
Link: https://lkml.kernel.org/r/202301091946553770006@zte.com.cn
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
'damon_pa_access_chk_result' struct contains only one field. Use a
variable instead.
Link: https://lkml.kernel.org/r/20230109213335.62525-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON physical address space monitoring operations set gets and saves size
of the folio for a given physical address inside rmap walks, but it can be
directly caluclated outside of the walks. Remove the 'folio_sz' field
from 'damon_pa_access_chk_result struct' and calculate the size directly
from outside of the walks.
Link: https://lkml.kernel.org/r/20230109213335.62525-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON's physical address space monitoring operations set is using folio
now. Rename 'damon_pa_access_chk_result->page_sz' to reflect the fact.
Link: https://lkml.kernel.org/r/20230109213335.62525-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON virtual address spaces monitoring operations set doesn't set folio
size of the access checked address if access is not found. It could
result in unnecessary and inefficient repeated check. Appropriately set
the size regardless of access check result.
Link: https://lkml.kernel.org/r/20230109213335.62525-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON virtual address space monitoring operations set treats folios having
non-HPAGE_PMD_SIZE size as having PAGE_SIZE size. Use the exact size of
the folio.
Link: https://lkml.kernel.org/r/20230109213335.62525-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon/{v,p}addr: misc fixups for folio usage".
DAMON's monitoring operations set for the virtual and the physical address
spaces use folio now, but some code is not reflecting the fact. Further
cleanup the code for folio usage.
This patch (of 6):
DAMON's virtual address space monitoring operations set is using folio
now. Rename 'damon_pa_access_chk_result->page_sz' to reflect the fact.
Link: https://lkml.kernel.org/r/20230109213335.62525-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230109213335.62525-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert damon_hugetlb_mkold() and damon_young_hugetlb_entry() to
use a folio.
Link: https://lkml.kernel.org/r/20221230070849.63358-9-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After all damon_get_page() callers are converted to damon_get_folio(),
remove unneeded wrapper damon_get_page().
Link: https://lkml.kernel.org/r/20221230070849.63358-8-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With damon_get_folio(), let's convert damon_young_pmd_entry()
to use a folio.
Link: https://lkml.kernel.org/r/20221230070849.63358-7-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With damon_get_folio(), let's convert all the damon_pa_*() to use a folio.
Link: https://lkml.kernel.org/r/20221230070849.63358-6-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With damon_get_folio(), let's convert damon_ptep_mkold() and
damon_pmdp_mkold() to use a folio.
Link: https://lkml.kernel.org/r/20221230070849.63358-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce damon_get_folio(), and the temporary wrapper function
damon_get_page(), which help us to convert damon related functions to use
folios, and it will be dropped once the conversion is completed.
Link: https://lkml.kernel.org/r/20221230070849.63358-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
