| Age | Commit message (Collapse) | Author |
|---|
|
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
|
|
This removes the signal/coredump hacks added for vhost_tasks in:
Commit f9010dbdce91 ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression")
When that patch was added vhost_tasks did not handle SIGKILL and would
try to ignore/clear the signal and continue on until the device's close
function was called. In the previous patches vhost_tasks and the vhost
drivers were converted to support SIGKILL by cleaning themselves up and
exiting. The hacks are no longer needed so this removes them.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20240316004707.45557-10-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove the sentinel from ctl_table arrays. Reduce by one the values used
to compare the size of the adjusted arrays.
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
|
|
This initialization is incomplete and unnecessary, neither do_group_exit()
nor PF_USER_WORKER need ksig->info.
Link: https://lkml.kernel.org/r/20240226165653.GA20834@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Wen Yang <wenyang.linux@foxmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ksig->ka and ksig->info are not initialized if get_signal() returns 0 or
if the caller is PF_USER_WORKER.
Check signr != 0 before SA_EXPOSE_TAGBITS and move the "out" label down.
The latter means that ksig->sig won't be initialized if a PF_USER_WORKER
thread gets a fatal signal but this is fine, PF_USER_WORKER's don't use
ksig. And there is nothing new, in this case ksig->ka and ksig-info are
not initialized anyway. Add a comment.
Link: https://lkml.kernel.org/r/20240226165650.GA20829@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Wen Yang <wenyang.linux@foxmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "get_signal: minor cleanups and fix".
Lets remove this clear_siginfo() right now. It is incomplete (and thus
looks confusing) and unnecessary. Also, PF_USER_WORKER's already don't
get a fully initialized ksig anyway.
This patch (of 3):
Cleanup and preparation for the next changes.
get_signal() uses signr or ksig->info.si_signo or ksig->sig in a chaotic
way, this looks confusing. Change it to always use signr.
Link: https://lkml.kernel.org/r/20240226165612.GA20787@redhat.com
Link: https://lkml.kernel.org/r/20240226165647.GA20826@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Wen Yang <wenyang.linux@foxmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Right now we determine the scope of the signal based on the type of
pidfd. There are use-cases where it's useful to override the scope of
the signal. For example in [1]. Add flags to determine the scope of the
signal:
(1) PIDFD_SIGNAL_THREAD: send signal to specific thread reference by @pidfd
(2) PIDFD_SIGNAL_THREAD_GROUP: send signal to thread-group of @pidfd
(2) PIDFD_SIGNAL_PROCESS_GROUP: send signal to process-group of @pidfd
Since we now allow specifying PIDFD_SEND_PROCESS_GROUP for
pidfd_send_signal() to send signals to process groups we need to adjust
the check restricting si_code emulation by userspace to account for
PIDTYPE_PGID.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://github.com/systemd/systemd/issues/31093 [1]
Link: https://lore.kernel.org/r/20240210-chihuahua-hinzog-3945b6abd44a@brauner
Link: https://lore.kernel.org/r/20240214123655.GB16265@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Turn kill_pid_info() into kill_pid_info_type(), this allows to pass any
pid_type to group_send_sig_info(), despite its name it should work fine
even if type = PIDTYPE_PID.
Change pidfd_send_signal() to use PIDTYPE_PID or PIDTYPE_TGID depending
on PIDFD_THREAD.
While at it kill another TODO comment in pidfd_show_fdinfo(). As Christian
expains fdinfo reports f_flags, userspace can already detect PIDFD_THREAD.
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240209130650.GA8048@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
So that do_tkill() can use this helper too. This also simplifies
the next patch.
TODO: perhaps we can kill prepare_kill_siginfo() and change the
callers to use SEND_SIG_NOINFO, but this needs some changes in
__send_signal_locked() and TP_STORE_SIGINFO().
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240209130620.GA8039@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
rather than wake_up_all(). This way do_notify_pidfd() won't wakeup the
POLLHUP-only waiters which wait for pid_task() == NULL.
TODO:
- as Christian pointed out, this asks for the new wake_up_all_poll()
helper, it can already have other users.
- we can probably discriminate the PIDFD_THREAD and non-PIDFD_THREAD
waiters, but this needs more work. See
https://lore.kernel.org/all/20240205140848.GA15853@redhat.com/
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240205141348.GA16539@redhat.com
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
With this flag:
- pidfd_open() doesn't require that the target task must be
a thread-group leader
- pidfd_poll() succeeds when the task exits and becomes a
zombie (iow, passes exit_notify()), even if it is a leader
and thread-group is not empty.
This means that the behaviour of pidfd_poll(PIDFD_THREAD,
pid-of-group-leader) is not well defined if it races with
exec() from its sub-thread; pidfd_poll() can succeed or not
depending on whether pidfd_task_exited() is called before
or after exchange_tids().
Perhaps we can improve this behaviour later, pidfd_poll()
can probably take sig->group_exec_task into account. But
this doesn't really differ from the case when the leader
exits before other threads (so pidfd_poll() succeeds) and
then another thread execs and pidfd_poll() will block again.
thread_group_exited() is no longer used, perhaps it can die.
Co-developed-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240131132602.GA23641@redhat.com
Tested-by: Tycho Andersen <tandersen@netflix.com>
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
do_notify_pidfd() makes no sense until the whole thread group exits, change
do_notify_parent() to check thread_group_empty().
This avoids the unnecessary do_notify_pidfd() when tsk is not a leader, or
it exits before other threads, or it has a ptraced EXIT_ZOMBIE sub-thread.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240127132407.GA29136@redhat.com
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
recalc_sigpending_and_wake()
The purpose of recalc_sigpending_and_wake() is not clear, it looks
"obviously unneeded" because we are going to send the signal which can't
be blocked or ignored.
Add the comment to explain why we can't rely on send_signal_locked() and
make this logic more simple/explicit. recalc_sigpending_and_wake() has no
other users, it can die.
In fact I think we don't even need signal_wake_up(), the target task must
be either current or a TASK_TRACED child, otherwise the usage of siglock
is not safe. But this needs another change.
Link: https://lkml.kernel.org/r/20231120151649.GA15995@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cosmetic, but imho it makes the usage look more clear and simple, the new
helper doesn't require to initialize "t".
After this change while_each_thread() has only 3 users, and it is only
used in the do/while loops.
Link: https://lkml.kernel.org/r/20231030155710.GA9095@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
|
|
ucounts is assigned first, so it does not need to initialize the
assignment.
Link: https://lkml.kernel.org/r/20230926022410.4280-1-kunyu@nfschina.com
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
do/while_each_thread should be avoided when possible.
Link: https://lkml.kernel.org/r/20230909164537.GA11633@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
No need to calculate/check the "success" variable, we can kill it and update
retval in the main loop unless it is zero.
Link: https://lkml.kernel.org/r/20230823171455.GA12188@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On PREEMPT_RT keeping preemption disabled during the invocation of
cgroup_enter_frozen() is a problem because the function acquires
css_set_lock which is a sleeping lock on PREEMPT_RT and must not be
acquired with disabled preemption.
The preempt-disabled section is only for performance optimisation reasons
and can be avoided.
Extend the comment and don't disable preemption before scheduling on
PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20230803100932.325870-3-bigeasy@linutronix.de
|
|
Commit 53da1d9456fe7 ("fix ptrace slowness") added a preempt-disable section
between read_unlock() and the following schedule() invocation without
explaining why it is needed.
Replace the existing contentless comment with a proper explanation to
clarify that it is not needed for correctness but for performance reasons.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20230803100932.325870-2-bigeasy@linutronix.de
|
|
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Make the print-fatal-signals message more useful by printing the comm
and the exe name for the process which received the fatal signal:
Before:
potentially unexpected fatal signal 4
potentially unexpected fatal signal 11
After:
buggy-program: pool: potentially unexpected fatal signal 4
some-daemon: gdbus: potentially unexpected fatal signal 11
comm used to be present but was removed in commit 681a90ffe829b8ee25d
("arc, print-fatal-signals: reduce duplicated information") because it's
also included as part of the later stack trace. Having the comm as part
of the main "unexpected fatal..." print is rather useful though when
analysing logs, and the exe name is also valuable as shown in the
examples above where the comm ends up having some generic name like
"pool".
[akpm@linux-foundation.org: don't include linux/file.h twice]
Link: https://lkml.kernel.org/r/20230707-fatal-comm-v1-1-400363905d5e@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit eda0047296a1 ("mm: make the page fault mmap locking killable")
intentionally made it much easier to trigger the "page fault fails
because a fatal signal is pending" situation, by having the mmap locking
fail early in that case.
We have long aborted page faults in other fatal cases when the actual IO
for a page is interrupted by SIGKILL - which is particularly useful for
the traditional case of NFS hanging due to network issues, but local
filesystems could cause it too if you happened to get the SIGKILL while
waiting for a page to be faulted in (eg lock_folio_maybe_drop_mmap()).
So aborting the page fault wasn't a new condition - but it now triggers
earlier, before we even get to 'handle_mm_fault()'. And as a result the
error doesn't go through our 'fault_signal_pending()' logic, and doesn't
get filtered away there.
Normally you'd never even notice, because if a fatal signal is pending,
the new SIGSEGV we send ends up being ignored anyway.
But it turns out that there is one very noticeable exception: if you
enable 'show_unhandled_signals', the aborted page fault will be logged
in the kernel messages, and you'll get a scary line looking something
like this in your logs:
pverados[2183248]: segfault at 55e5a00f9ae0 ip 000055e5a00f9ae0 sp 00007ffc0720bea8 error 14 in perl[55e5a00d4000+195000] likely on CPU 10 (core 4, socket 0)
which is rather misleading. It's not really a segfault at all, it's
just "the thread was killed before the page fault completed, so we
aborted the page fault".
Fix this by just making it clear that a pending fatal signal means that
any new signal coming in after that is implicitly handled. This will
avoid the misleading logging, since now the signal isn't 'unhandled' any
more.
Reported-and-tested-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Link: https://lore.kernel.org/lkml/8d063a26-43f5-0bb7-3203-c6a04dc159f8@proxmox.com/
Acked-by: Oleg Nesterov <oleg@redhat.com>
Fixes: eda0047296a1 ("mm: make the page fault mmap locking killable")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"The changes for sysctl are in line with prior efforts to stop usage of
deprecated routines which incur recursion and also make it hard to
remove the empty array element in each sysctl array declaration.
The most difficult user to modify was parport which required a bit of
re-thinking of how to declare shared sysctls there, Joel Granados has
stepped up to the plate to do most of this work and eventual removal
of register_sysctl_table(). That work ended up saving us about 1465
bytes according to bloat-o-meter. Since we gained a few bloat-o-meter
karma points I moved two rather small sysctl arrays from
kernel/sysctl.c leaving us only two more sysctl arrays to move left.
Most changes have been tested on linux-next for about a month. The
last straggler patches are a minor parport fix, changes to the sysctl
kernel selftest so to verify correctness and prevent regressions for
the future change he made to provide an alternative solution for the
special sysctl mount point target which was using the now deprecated
sysctl child element.
This is all prep work to now finally be able to remove the empty array
element in all sysctl declarations / registrations which is expected
to save us a bit of bytes all over the kernel. That work will be
tested early after v6.5-rc1 is out"
* tag 'v6.5-rc1-sysctl-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: replace child with an enumeration
sysctl: Remove debugging dump_stack
test_sysclt: Test for registering a mount point
test_sysctl: Add an option to prevent test skip
test_sysctl: Add an unregister sysctl test
test_sysctl: Group node sysctl test under one func
test_sysctl: Fix test metadata getters
parport: plug a sysctl register leak
sysctl: move security keys sysctl registration to its own file
sysctl: move umh sysctl registration to its own file
signal: move show_unhandled_signals sysctl to its own file
sysctl: remove empty dev table
sysctl: Remove register_sysctl_table
sysctl: Refactor base paths registrations
sysctl: stop exporting register_sysctl_table
parport: Removed sysctl related defines
parport: Remove register_sysctl_table from parport_default_proc_register
parport: Remove register_sysctl_table from parport_device_proc_register
parport: Remove register_sysctl_table from parport_proc_register
parport: Move magic number "15" to a define
|
|
When switching from kthreads to vhost_tasks two bugs were added:
1. The vhost worker tasks's now show up as processes so scripts doing
ps or ps a would not incorrectly detect the vhost task as another
process. 2. kthreads disabled freeze by setting PF_NOFREEZE, but
vhost tasks's didn't disable or add support for them.
To fix both bugs, this switches the vhost task to be thread in the
process that does the VHOST_SET_OWNER ioctl, and has vhost_worker call
get_signal to support SIGKILL/SIGSTOP and freeze signals. Note that
SIGKILL/STOP support is required because CLONE_THREAD requires
CLONE_SIGHAND which requires those 2 signals to be supported.
This is a modified version of the patch written by Mike Christie
<michael.christie@oracle.com> which was a modified version of patch
originally written by Linus.
Much of what depended upon PF_IO_WORKER now depends on PF_USER_WORKER.
Including ignoring signals, setting up the register state, and having
get_signal return instead of calling do_group_exit.
Tidied up the vhost_task abstraction so that the definition of
vhost_task only needs to be visible inside of vhost_task.c. Making
it easier to review the code and tell what needs to be done where.
As part of this the main loop has been moved from vhost_worker into
vhost_task_fn. vhost_worker now returns true if work was done.
The main loop has been updated to call get_signal which handles
SIGSTOP, freezing, and collects the message that tells the thread to
exit as part of process exit. This collection clears
__fatal_signal_pending. This collection is not guaranteed to
clear signal_pending() so clear that explicitly so the schedule()
sleeps.
For now the vhost thread continues to exist and run work until the
last file descriptor is closed and the release function is called as
part of freeing struct file. To avoid hangs in the coredump
rendezvous and when killing threads in a multi-threaded exec. The
coredump code and de_thread have been modified to ignore vhost threads.
Remvoing the special case for exec appears to require teaching
vhost_dev_flush how to directly complete transactions in case
the vhost thread is no longer running.
Removing the special case for coredump rendezvous requires either the
above fix needed for exec or moving the coredump rendezvous into
get_signal.
Fixes: 6e890c5d5021 ("vhost: use vhost_tasks for worker threads")
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Co-developed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The show_unhandled_signals sysctl is the only sysctl for debug
left on kernel/sysctl.c. We've been moving the syctls out from
kernel/sysctl.c so to help avoid merge conflicts as the shared
array gets out of hand.
This change incurs simplifies sysctl registration by localizing
it where it should go for a penalty in size of increasing the
kernel by 23 bytes, we accept this given recent cleanups have
actually already saved us 1465 bytes in the prior commits.
./scripts/bloat-o-meter vmlinux.3-remove-dev-table vmlinux.4-remove-debug-table
add/remove: 3/1 grow/shrink: 0/1 up/down: 177/-154 (23)
Function old new delta
signal_debug_table - 128 +128
init_signal_sysctls - 33 +33
__pfx_init_signal_sysctls - 16 +16
sysctl_init_bases 85 59 -26
debug_table 128 - -128
Total: Before=21256967, After=21256990, chg +0.00%
Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
POSIX timers using the CLOCK_PROCESS_CPUTIME_ID clock prefer the main
thread of a thread group for signal delivery. However, this has a
significant downside: it requires waking up a potentially idle thread.
Instead, prefer to deliver signals to the current thread (in the same
thread group) if SIGEV_THREAD_ID is not set by the user. This does not
change guaranteed semantics, since POSIX process CPU time timers have
never guaranteed that signal delivery is to a specific thread (without
SIGEV_THREAD_ID set).
The effect is that queueing the signal no longer wakes up potentially idle
threads, and the kernel is no longer biased towards delivering the timer
signal to any particular thread (which better distributes the timer signals
esp. when multiple timers fire concurrently).
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230316123028.2890338-1-elver@google.com
|
|
This feature allows the scheduler to expose a per-memory map concurrency
ID to user-space. This concurrency ID is within the possible cpus range,
and is temporarily (and uniquely) assigned while threads are actively
running within a memory map. If a memory map has fewer threads than
cores, or is limited to run on few cores concurrently through sched
affinity or cgroup cpusets, the concurrency IDs will be values close
to 0, thus allowing efficient use of user-space memory for per-cpu
data structures.
This feature is meant to be exposed by a new rseq thread area field.
The primary purpose of this feature is to do the heavy-lifting needed
by memory allocators to allow them to use per-cpu data structures
efficiently in the following situations:
- Single-threaded applications,
- Multi-threaded applications on large systems (many cores) with limited
cpu affinity mask,
- Multi-threaded applications on large systems (many cores) with
restricted cgroup cpuset per container.
One of the key concern from scheduler maintainers is the overhead
associated with additional spin locks or atomic operations in the
scheduler fast-path. This is why the following optimization is
implemented.
On context switch between threads belonging to the same memory map,
transfer the mm_cid from prev to next without any atomic ops. This
takes care of use-cases involving frequent context switch between
threads belonging to the same memory map.
Additional optimizations can be done if the spin locks added when
context switching between threads belonging to different memory maps end
up being a performance bottleneck. Those are left out of this patch
though. A performance impact would have to be clearly demonstrated to
justify the added complexity.
The credit goes to Paul Turner (Google) for the original virtual cpu id
idea. This feature is implemented based on the discussions with Paul
Turner and Peter Oskolkov (Google), but I took the liberty to implement
scheduler fast-path optimizations and my own NUMA-awareness scheme. The
rumor has it that Google have been running a rseq vcpu_id extension
internally in production for a year. The tcmalloc source code indeed has
comments hinting at a vcpu_id prototype extension to the rseq system
call [1].
The following benchmarks do not show any significant overhead added to
the scheduler context switch by this feature:
* perf bench sched messaging (process)
Baseline: 86.5±0.3 ms
With mm_cid: 86.7±2.6 ms
* perf bench sched messaging (threaded)
Baseline: 84.3±3.0 ms
With mm_cid: 84.7±2.6 ms
* hackbench (process)
Baseline: 82.9±2.7 ms
With mm_cid: 82.9±2.9 ms
* hackbench (threaded)
Baseline: 85.2±2.6 ms
With mm_cid: 84.4±2.9 ms
[1] https://github.com/google/tcmalloc/blob/master/tcmalloc/internal/linux_syscall_support.h#L26
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-8-mathieu.desnoyers@efficios.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
- Convert flexible array members, fix -Wstringop-overflow warnings, and
fix KCFI function type mismatches that went ignored by maintainers
(Gustavo A. R. Silva, Nathan Chancellor, Kees Cook)
- Remove the remaining side-effect users of ksize() by converting
dma-buf, btrfs, and coredump to using kmalloc_size_roundup(), add
more __alloc_size attributes, and introduce full testing of all
allocator functions. Finally remove the ksize() side-effect so that
each allocation-aware checker can finally behave without exceptions
- Introduce oops_limit (default 10,000) and warn_limit (default off) to
provide greater granularity of control for panic_on_oops and
panic_on_warn (Jann Horn, Kees Cook)
- Introduce overflows_type() and castable_to_type() helpers for cleaner
overflow checking
- Improve code generation for strscpy() and update str*() kern-doc
- Convert strscpy and sigphash tests to KUnit, and expand memcpy tests
- Always use a non-NULL argument for prepare_kernel_cred()
- Disable structleak plugin in FORTIFY KUnit test (Anders Roxell)
- Adjust orphan linker section checking to respect CONFIG_WERROR (Xin
Li)
- Make sure siginfo is cleared for forced SIGKILL (haifeng.xu)
- Fix um vs FORTIFY warnings for always-NULL arguments
* tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (31 commits)
ksmbd: replace one-element arrays with flexible-array members
hpet: Replace one-element array with flexible-array member
um: virt-pci: Avoid GCC non-NULL warning
signal: Initialize the info in ksignal
lib: fortify_kunit: build without structleak plugin
panic: Expose "warn_count" to sysfs
panic: Introduce warn_limit
panic: Consolidate open-coded panic_on_warn checks
exit: Allow oops_limit to be disabled
exit: Expose "oops_count" to sysfs
exit: Put an upper limit on how often we can oops
panic: Separate sysctl logic from CONFIG_SMP
mm/pgtable: Fix multiple -Wstringop-overflow warnings
mm: Make ksize() a reporting-only function
kunit/fortify: Validate __alloc_size attribute results
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
driver core: Add __alloc_size hint to devm allocators
overflow: Introduce overflows_type() and castable_to_type()
coredump: Proactively round up to kmalloc bucket size
...
|
|
When handing the SIGNAL_GROUP_EXIT flag, the info in ksignal isn't cleared.
However, the info acquired by dequeue_synchronous_signal/dequeue_signal is
initialized and can be safely used. Fortunately, the fatal signal process
just uses the si_signo and doesn't use any other member. Even so, the
initialization before use is more safer.
Signed-off-by: haifeng.xu <haifeng.xu@shopee.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221128065606.19570-1-haifeng.xu@shopee.com
|
|
Once upon at it was used on hot paths, but that had not been
true since 2013. IOW, there's no point for arch-optimized
equivalent of task_pt_regs(current) - remaining two users are
not worth bothering with.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
Freezer:
- Rewrite the core freezer to behave better wrt thawing and be
simpler in general, by replacing PF_FROZEN with TASK_FROZEN &
fixing/adjusting all the fallout.
Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() &
replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications"
* tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
sched: Fix more TASK_state comparisons
sched: Fix TASK_state comparisons
sched/fair: Move call to list_last_entry() in detach_tasks
sched/fair: Cleanup loop_max and loop_break
sched/fair: Make sure to try to detach at least one movable task
sched: Show PF_flag holes
freezer,sched: Rewrite core freezer logic
sched: Widen TAKS_state literals
sched/wait: Add wait_event_state()
sched/completion: Add wait_for_completion_state()
sched: Add TASK_ANY for wait_task_inactive()
sched: Change wait_task_inactive()s match_state
freezer,umh: Clean up freezer/initrd interaction
freezer: Have {,un}lock_system_sleep() save/restore flags
sched: Rename task_running() to task_on_cpu()
sched/fair: Cleanup for SIS_PROP
sched/fair: Default to false in test_idle_cores()
sched/fair: Remove useless check in select_idle_core()
sched/fair: Avoid double search on same cpu
sched/fair: Remove redundant check in select_idle_smt()
...
|
|
Rewrite the core freezer to behave better wrt thawing and be simpler
in general.
By replacing PF_FROZEN with TASK_FROZEN, a special block state, it is
ensured frozen tasks stay frozen until thawed and don't randomly wake
up early, as is currently possible.
As such, it does away with PF_FROZEN and PF_FREEZER_SKIP, freeing up
two PF_flags (yay!).
Specifically; the current scheme works a little like:
freezer_do_not_count();
schedule();
freezer_count();
And either the task is blocked, or it lands in try_to_freezer()
through freezer_count(). Now, when it is blocked, the freezer
considers it frozen and continues.
However, on thawing, once pm_freezing is cleared, freezer_count()
stops working, and any random/spurious wakeup will let a task run
before its time.
That is, thawing tries to thaw things in explicit order; kernel
threads and workqueues before doing bringing SMP back before userspace
etc.. However due to the above mentioned races it is entirely possible
for userspace tasks to thaw (by accident) before SMP is back.
This can be a fatal problem in asymmetric ISA architectures (eg ARMv9)
where the userspace task requires a special CPU to run.
As said; replace this with a special task state TASK_FROZEN and add
the following state transitions:
TASK_FREEZABLE -> TASK_FROZEN
__TASK_STOPPED -> TASK_FROZEN
__TASK_TRACED -> TASK_FROZEN
The new TASK_FREEZABLE can be set on any state part of TASK_NORMAL
(IOW. TASK_INTERRUPTIBLE and TASK_UNINTERRUPTIBLE) -- any such state
is already required to deal with spurious wakeups and the freezer
causes one such when thawing the task (since the original state is
lost).
The special __TASK_{STOPPED,TRACED} states *can* be restored since
their canonical state is in ->jobctl.
With this, frozen tasks need an explicit TASK_FROZEN wakeup and are
free of undue (early / spurious) wakeups.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114649.055452969@infradead.org
|
|
In 403bad72b67d ("coredump: only SIGKILL should interrupt the
coredumping task") Oleg modified the kernel to drop all signals that
come in during a coredump except SIGKILL, and suggested that it might
be a good idea to generalize that to other cases after the process has
received a fatal signal.
Semantically it does not make sense to perform any signal delivery
after the process has already been killed.
When a signal is sent while a process is dying today the signal is
placed in the signal queue by __send_signal and a single task of the
process is woken up with signal_wake_up, if there are any tasks that
have not set PF_EXITING.
Take things one step farther and have prepare_signal report that all
signals that come after a process has been killed should be ignored.
While retaining the historical exception of allowing SIGKILL to
interrupt coredumps.
Update the comment in fs/coredump.c to make it clear coredumps are
special in being able to receive SIGKILL.
This changes things so that a process stopped in PTRACE_EVENT_EXIT can
not be made to escape it's ptracer and finish exiting by sending it
SIGKILL. That a process can be made to leave PTRACE_EVENT_EXIT and
escape it's tracer by sending the process a SIGKILL has been
complicating tracer's for no apparent advantage. If the process needs
to be made to leave PTRACE_EVENT_EXIT all that needs to happen is to
kill the proceses's tracer. This differs from the coredump code where
there is no other mechanism besides honoring SIGKILL to expedite the
end of coredumping.
Link: https://lkml.kernel.org/r/875yksd4s9.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
These are indeed "should not happen" situations, but it turns out recent
changes made the 'task_is_stopped_or_trace()' case trigger (fix for that
exists, is pending more testing), and the BUG_ON() makes it
unnecessarily hard to actually debug for no good reason.
It's been that way for a long time, but let's make it clear: BUG_ON() is
not good for debugging, and should never be used in situations where you
could just say "this shouldn't happen, but we can continue".
Use WARN_ON_ONCE() instead to make sure it gets logged, and then just
continue running. Instead of making the system basically unusuable
because you crashed the machine while potentially holding some very core
locks (eg this function is commonly called while holding 'tasklist_lock'
for writing).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace_stop cleanups from Eric Biederman:
"While looking at the ptrace problems with PREEMPT_RT and the problems
Peter Zijlstra was encountering with ptrace in his freezer rewrite I
identified some cleanups to ptrace_stop that make sense on their own
and move make resolving the other problems much simpler.
The biggest issue is the habit of the ptrace code to change
task->__state from the tracer to suppress TASK_WAKEKILL from waking up
the tracee. No other code in the kernel does that and it is straight
forward to update signal_wake_up and friends to make that unnecessary.
Peter's task freezer sets frozen tasks to a new state TASK_FROZEN and
then it stores them by calling "wake_up_state(t, TASK_FROZEN)" relying
on the fact that all stopped states except the special stop states can
tolerate spurious wake up and recover their state.
The state of stopped and traced tasked is changed to be stored in
task->jobctl as well as in task->__state. This makes it possible for
the freezer to recover tasks in these special states, as well as
serving as a general cleanup. With a little more work in that
direction I believe TASK_STOPPED can learn to tolerate spurious wake
ups and become an ordinary stop state.
The TASK_TRACED state has to remain a special state as the registers
for a process are only reliably available when the process is stopped
in the scheduler. Fundamentally ptrace needs acess to the saved
register values of a task.
There are bunch of semi-random ptrace related cleanups that were found
while looking at these issues.
One cleanup that deserves to be called out is from commit 57b6de08b5f6
("ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs"). This
makes a change that is technically user space visible, in the handling
of what happens to a tracee when a tracer dies unexpectedly. According
to our testing and our understanding of userspace nothing cares that
spurious SIGTRAPs can be generated in that case"
* tag 'ptrace_stop-cleanup-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched,signal,ptrace: Rework TASK_TRACED, TASK_STOPPED state
ptrace: Always take siglock in ptrace_resume
ptrace: Don't change __state
ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs
ptrace: Document that wait_task_inactive can't fail
ptrace: Reimplement PTRACE_KILL by always sending SIGKILL
signal: Use lockdep_assert_held instead of assert_spin_locked
ptrace: Remove arch_ptrace_attach
ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
ptrace/um: Replace PT_DTRACE with TIF_SINGLESTEP
signal: Replace __group_send_sig_info with send_signal_locked
signal: Rename send_signal send_signal_locked
|
|
Currently ptrace_stop() / do_signal_stop() rely on the special states
TASK_TRACED and TASK_STOPPED resp. to keep unique state. That is, this
state exists only in task->__state and nowhere else.
There's two spots of bother with this:
- PREEMPT_RT has task->saved_state which complicates matters,
meaning task_is_{traced,stopped}() needs to check an additional
variable.
- An alternative freezer implementation that itself relies on a
special TASK state would loose TASK_TRACED/TASK_STOPPED and will
result in misbehaviour.
As such, add additional state to task->jobctl to track this state
outside of task->__state.
NOTE: this doesn't actually fix anything yet, just adds extra state.
--EWB
* didn't add a unnecessary newline in signal.h
* Update t->jobctl in signal_wake_up and ptrace_signal_wake_up
instead of in signal_wake_up_state. This prevents the clearing
of TASK_STOPPED and TASK_TRACED from getting lost.
* Added warnings if JOBCTL_STOPPED or JOBCTL_TRACED are not cleared
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220421150654.757693825@infradead.org
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-12-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Stop playing with tsk->__state to remove TASK_WAKEKILL while a ptrace
command is executing.
Instead remove TASK_WAKEKILL from the definition of TASK_TRACED, and
implement a new jobctl flag TASK_PTRACE_FROZEN. This new flag is set
in jobctl_freeze_task and cleared when ptrace_stop is awoken or in
jobctl_unfreeze_task (when ptrace_stop remains asleep).
In signal_wake_up add __TASK_TRACED to state along with TASK_WAKEKILL
when the wake up is for a fatal signal. Skip adding __TASK_TRACED
when TASK_PTRACE_FROZEN is not set. This has the same effect as
changing TASK_TRACED to __TASK_TRACED as all of the wake_ups that use
TASK_KILLABLE go through signal_wake_up.
Handle a ptrace_stop being called with a pending fatal signal.
Previously it would have been handled by schedule simply failing to
sleep. As TASK_WAKEKILL is no longer part of TASK_TRACED schedule
will sleep with a fatal_signal_pending. The code in signal_wake_up
guarantees that the code will be awaked by any fatal signal that
codes after TASK_TRACED is set.
Previously the __state value of __TASK_TRACED was changed to
TASK_RUNNING when woken up or back to TASK_TRACED when the code was
left in ptrace_stop. Now when woken up ptrace_stop now clears
JOBCTL_PTRACE_FROZEN and when left sleeping ptrace_unfreezed_traced
clears JOBCTL_PTRACE_FROZEN.
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-10-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Long ago and far away there was a BUG_ON at the start of ptrace_stop
that did "BUG_ON(!(current->ptrace & PT_PTRACED));" [1]. The BUG_ON
had never triggered but examination of the code showed that the BUG_ON
could actually trigger. To complement removing the BUG_ON an attempt
to better handle the race was added.
The code detected the tracer had gone away and did not call
do_notify_parent_cldstop. The code also attempted to prevent
ptrace_report_syscall from sending spurious SIGTRAPs when the tracer
went away.
The code to detect when the tracer had gone away before sending a
signal to tracer was a legitimate fix and continues to work to this
date.
The code to prevent sending spurious SIGTRAPs is a failure. At the
time and until today the code only catches it when the tracer goes
away after siglock is dropped and before read_lock is acquired. If
the tracer goes away after read_lock is dropped a spurious SIGTRAP can
still be sent to the tracee. The tracer going away after read_lock
is dropped is the far likelier case as it is the bigger window.
Given that the attempt to prevent the generation of a SIGTRAP was a
failure and continues to be a failure remove the code that attempts to
do that. This simplifies the code in ptrace_stop and makes
ptrace_stop much easier to reason about.
To successfully deal with the tracer going away, all of the tracer's
instrumentation of the child would need to be removed, and reliably
detecting when the tracer has set a signal to continue with would need
to be implemented.
[1] 66519f549ae5 ("[PATCH] fix ptracer death race yielding bogus BUG_ON")
History-Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-9-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The distinction is that assert_spin_locked() checks if the lock is
held *by*anyone* whereas lockdep_assert_held() asserts the current
context holds the lock. Also, the check goes away if you build
without lockdep.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Ympr/+PX4XgT/UKU@hirez.programming.kicks-ass.net
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-6-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The function __group_send_sig_info is just a light wrapper around
send_signal_locked with one parameter fixed to a constant value. As
the wrapper adds no real value update the code to directly call the
wrapped function.
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-2-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Rename send_signal and __send_signal to send_signal_locked and
__send_signal_locked to make send_signal usable outside of
signal.c.
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-1-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
With SIGTRAP on perf events, we have encountered termination of
processes due to user space attempting to block delivery of SIGTRAP.
Consider this case:
<set up SIGTRAP on a perf event>
...
sigset_t s;
sigemptyset(&s);
sigaddset(&s, SIGTRAP | <and others>);
sigprocmask(SIG_BLOCK, &s, ...);
...
<perf event triggers>
When the perf event triggers, while SIGTRAP is blocked, force_sig_perf()
will force the signal, but revert back to the default handler, thus
terminating the task.
This makes sense for error conditions, but not so much for explicitly
requested monitoring. However, the expectation is still that signals
generated by perf events are synchronous, which will no longer be the
case if the signal is blocked and delivered later.
To give user space the ability to clearly distinguish synchronous from
asynchronous signals, introduce siginfo_t::si_perf_flags and
TRAP_PERF_FLAG_ASYNC (opted for flags in case more binary information is
required in future).
The resolution to the problem is then to (a) no longer force the signal
(avoiding the terminations), but (b) tell user space via si_perf_flags
if the signal was synchronous or not, so that such signals can be
handled differently (e.g. let user space decide to ignore or consider
the data imprecise).
The alternative of making the kernel ignore SIGTRAP on perf events if
the signal is blocked may work for some usecases, but likely causes
issues in others that then have to revert back to interception of
sigprocmask() (which we want to avoid). [ A concrete example: when using
breakpoint perf events to track data-flow, in a region of code where
signals are blocked, data-flow can no longer be tracked accurately.
When a relevant asynchronous signal is received after unblocking the
signal, the data-flow tracking logic needs to know its state is
imprecise. ]
Fixes: 97ba62b27867 ("perf: Add support for SIGTRAP on perf events")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220404111204.935357-1-elver@google.com
|
|
Revert commit bf9ad37dc8a. It needs to be better encapsulated and
generalized.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
|
|
The signal a task should continue with after a ptrace stop is
inconsistently read, cleared, and sent. Solve this by reading and
clearing the signal to be sent in ptrace_stop.
In an ideal world everything except ptrace_signal would share a common
implementation of continuing with the signal, so ptracers could count
on the signal they ask to continue with actually being delivered. For
now retain bug compatibility and just return with the signal number
the ptracer requested the code continue with.
Link: https://lkml.kernel.org/r/875yoe7qdp.fsf_-_@email.froward.int.ebiederm.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Today ptrace_message is easy to overlook as it not a core part of
ptrace_stop. It has been overlooked so much that there are places
that set ptrace_message and don't clear it, and places that never set
it. So if you get an unlucky sequence of events the ptracer may be
able to read a ptrace_message that does not apply to the current
ptrace stop.
Move setting of ptrace_message into ptrace_stop so that it always gets
set before the stop, and always gets cleared after the stop. This
prevents non-sense from being reported to userspace and makes
ptrace_message more visible in the ptrace helper functions so that
kernel developers can see it.
Link: https://lkml.kernel.org/r/87bky67qfv.fsf_-_@email.froward.int.ebiederm.org
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Now that all of the definitions have moved out of tracehook.h into
ptrace.h, sched/signal.h, resume_user_mode.h there is nothing left in
tracehook.h so remove it.
Update the few files that were depending upon tracehook.h to bring in
definitions to use the headers they need directly.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-13-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
