| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A bumper crop of arm64 fixes for -rc3.
The largest change is fixing our parsing of the 'rodata=full' command
line option, which kstrtobool() started treating as 'rodata=false'.
The fix actually makes the parsing of that option much less fragile
and updates the documentation at the same time.
We still have a boot issue pending when KASLR is disabled at compile
time, but there's a fresh fix on the list which I'll send next week if
it holds up to testing.
Summary:
- Fix workaround for Cortex-A76 erratum #1286807
- Add workaround for AMU erratum #2457168 on Cortex-A510
- Drop reference to removed CONFIG_ARCH_RANDOM #define
- Fix parsing of the "rodata=full" cmdline option
- Fix a bunch of issues in the SME register state switching and sigframe code
- Fix incorrect extraction of the CTR_EL0.CWG register field
- Fix ACPI cache topology probing when the PPTT is not present
- Trivial comment and whitespace fixes"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/sme: Don't flush SVE register state when handling SME traps
arm64/sme: Don't flush SVE register state when allocating SME storage
arm64/signal: Flush FPSIMD register state when disabling streaming mode
arm64/signal: Raise limit on stack frames
arm64/cache: Fix cache_type_cwg() for register generation
arm64/sysreg: Guard SYS_FIELD_ macros for asm
arm64/sysreg: Directly include bitfield.h
arm64: cacheinfo: Fix incorrect assignment of signed error value to unsigned fw_level
arm64: errata: add detection for AMEVCNTR01 incrementing incorrectly
arm64: fix rodata=full
arm64: Fix comment typo
docs/arm64: elf_hwcaps: unify newlines in HWCAP lists
arm64: adjust KASLR relocation after ARCH_RANDOM removal
arm64: Fix match_list for erratum 1286807 on Arm Cortex-A76
|
|
On arm64, "rodata=full" has been suppored (but not documented) since
commit:
c55191e96caa9d78 ("arm64: mm: apply r/o permissions of VM areas to its linear alias as well")
As it's necessary to determine the rodata configuration early during
boot, arm64 has an early_param() handler for this, whereas init/main.c
has a __setup() handler which is run later.
Unfortunately, this split meant that since commit:
f9a40b0890658330 ("init/main.c: return 1 from handled __setup() functions")
... passing "rodata=full" would result in a spurious warning from the
__setup() handler (though RO permissions would be configured
appropriately).
Further, "rodata=full" has been broken since commit:
0d6ea3ac94ca77c5 ("lib/kstrtox.c: add "false"/"true" support to kstrtobool()")
... which caused strtobool() to parse "full" as false (in addition to
many other values not documented for the "rodata=" kernel parameter.
This patch fixes this breakage by:
* Moving the core parameter parser to an __early_param(), such that it
is available early.
* Adding an (optional) arch hook which arm64 can use to parse "full".
* Updating the documentation to mention that "full" is valid for arm64.
* Having the core parameter parser handle "on" and "off" explicitly,
such that any undocumented values (e.g. typos such as "ful") are
reported as errors rather than being silently accepted.
Note that __setup() and early_param() have opposite conventions for
their return values, where __setup() uses 1 to indicate a parameter was
handled and early_param() uses 0 to indicate a parameter was handled.
Fixes: f9a40b089065 ("init/main.c: return 1 from handled __setup() functions")
Fixes: 0d6ea3ac94ca ("lib/kstrtox.c: add "false"/"true" support to kstrtobool()")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jagdish Gediya <jvgediya@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220817154022.3974645-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
GCC has supported asm goto since 4.5, and Clang has since version 9.0.0.
The minimum supported versions of these tools for the build according to
Documentation/process/changes.rst are 5.1 and 11.0.0 respectively.
Remove the feature detection script, Kconfig option, and clean up some
fallback code that is no longer supported.
The removed script was also testing for a GCC specific bug that was
fixed in the 4.7 release.
Also remove workarounds for bpftrace using clang older than 9.0.0, since
other BPF backend fixes are required at this point.
Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/
Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637
Acked-by: Borislav Petkov <bp@suse.de>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the support for -O3 (CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3)
- Fix error of rpm-pkg cross-builds
- Support riscv for checkstack tool
- Re-enable -Wformwat warnings for Clang
- Clean up modpost, Makefiles, and misc scripts
* tag 'kbuild-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
modpost: remove .symbol_white_list field entirely
modpost: remove unneeded .symbol_white_list initializers
modpost: add PATTERNS() helper macro
modpost: shorten warning messages in report_sec_mismatch()
Revert "Kbuild, lto, workaround: Don't warn for initcall_reference in modpost"
modpost: use more reliable way to get fromsec in section_rel(a)()
modpost: add array range check to sec_name()
modpost: refactor get_secindex()
kbuild: set EXIT trap before creating temporary directory
modpost: remove unused Elf_Sword macro
Makefile.extrawarn: re-enable -Wformat for clang
kbuild: add dtbs_prepare target
kconfig: Qt5: tell the user which packages are required
modpost: use sym_get_data() to get module device_table data
modpost: drop executable ELF support
checkstack: add riscv support for scripts/checkstack.pl
kconfig: shorten the temporary directory name for cc-option
scripts: headers_install.sh: Update config leak ignore entries
kbuild: error out if $(INSTALL_MOD_PATH) contains % or :
kbuild: error out if $(KBUILD_EXTMOD) contains % or :
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"For the 6.0 merge window the modules code shifts to cleanup and minor
fixes effort. This becomes much easier to do and review now due to the
code split to its own directory from effort on the last kernel
release. I expect to see more of this with time and as we expand on
test coverage in the future. The cleanups and fixes come from usual
suspects such as Christophe Leroy and Aaron Tomlin but there are also
some other contributors.
One particular minor fix worth mentioning is from Helge Deller, where
he spotted a *forever* incorrect natural alignment on both ELF section
header tables:
* .altinstructions
* __bug_table sections
A lot of back and forth went on in trying to determine the ill effects
of this misalignment being present for years and it has been
determined there should be no real ill effects unless you have a buggy
exception handler. Helge actually hit one of these buggy exception
handlers on parisc which is how he ended up spotting this issue. When
implemented correctly these paths with incorrect misalignment would
just mean a performance penalty, but given that we are dealing with
alternatives on modules and with the __bug_table (where info regardign
BUG()/WARN() file/line information associated with it is stored) this
really shouldn't be a big deal.
The only other change with mentioning is the kmap() with
kmap_local_page() and my only concern with that was on what is done
after preemption, but the virtual addresses are restored after
preemption. This is only used on module decompression.
This all has sit on linux-next for a while except the kmap stuff which
has been there for 3 weeks"
* tag 'modules-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Replace kmap() with kmap_local_page()
module: Show the last unloaded module's taint flag(s)
module: Use strscpy() for last_unloaded_module
module: Modify module_flags() to accept show_state argument
module: Move module's Kconfig items in kernel/module/
MAINTAINERS: Update file list for module maintainers
module: Use vzalloc() instead of vmalloc()/memset(0)
modules: Ensure natural alignment for .altinstructions and __bug_table sections
module: Increase readability of module_kallsyms_lookup_name()
module: Fix ERRORs reported by checkpatch.pl
module: Add support for default value for module async_probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc. A relatively small amount of
material this time"
* tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
scripts/gdb: ensure the absolute path is generated on initial source
MAINTAINERS: kunit: add David Gow as a maintainer of KUnit
mailmap: add linux.dev alias for Brendan Higgins
mailmap: update Kirill's email
profile: setup_profiling_timer() is moslty not implemented
ocfs2: fix a typo in a comment
ocfs2: use the bitmap API to simplify code
ocfs2: remove some useless functions
lib/mpi: fix typo 'the the' in comment
proc: add some (hopefully) insightful comments
bdi: remove enum wb_congested_state
kernel/hung_task: fix address space of proc_dohung_task_timeout_secs
lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t()
squashfs: support reading fragments in readahead call
squashfs: implement readahead
squashfs: always build "file direct" version of page actor
Revert "squashfs: provide backing_dev_info in order to disable read-ahead"
fs/ocfs2: Fix spelling typo in comment
ia64: old_rr4 added under CONFIG_HUGETLB_PAGE
proc: fix test for "vsyscall=xonly" boot option
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Several core optimizations:
- threadgroup_rwsem write locking is skipped when configuring
controllers in empty subtrees.
Combined with CLONE_INTO_CGROUP, this allows the common static
usage pattern to not grab threadgroup_rwsem at all (glibc still
doesn't seem ready for CLONE_INTO_CGROUP unfortunately).
- threadgroup_rwsem used to be put into non-percpu mode by default
due to latency concerns in specific use cases. There's no reason
for everyone else to pay for it. Make the behavior optional.
- psi no longer allocates memory when disabled.
... along with some code cleanups"
* tag 'cgroup-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Skip subtree root in cgroup_update_dfl_csses()
cgroup: remove "no" prefixed mount options
cgroup: Make !percpu threadgroup_rwsem operations optional
cgroup: Add "no" prefixed mount options
cgroup: Elide write-locking threadgroup_rwsem when updating csses on an empty subtree
cgroup.c: remove redundant check for mixable cgroup in cgroup_migrate_vet_dst
cgroup.c: add helper __cset_cgroup_from_root to cleanup duplicated codes
psi: dont alloc memory for psi by default
|
|
Pull documentation updates from Jonathan Corbet:
"This was a moderately busy cycle for documentation, but nothing
all that earth-shaking:
- More Chinese translations, and an update to the Italian
translations.
The Japanese, Korean, and traditional Chinese translations
are more-or-less unmaintained at this point, instead.
- Some build-system performance improvements.
- The removal of the archaic submitting-drivers.rst document,
with the movement of what useful material that remained into
other docs.
- Improvements to sphinx-pre-install to, hopefully, give more
useful suggestions.
- A number of build-warning fixes
Plus the usual collection of typo fixes, updates, and more"
* tag 'docs-6.0' of git://git.lwn.net/linux: (92 commits)
docs: efi-stub: Fix paths for x86 / arm stubs
Docs/zh_CN: Update the translation of sched-stats to 5.19-rc8
Docs/zh_CN: Update the translation of pci to 5.19-rc8
Docs/zh_CN: Update the translation of pci-iov-howto to 5.19-rc8
Docs/zh_CN: Update the translation of usage to 5.19-rc8
Docs/zh_CN: Update the translation of testing-overview to 5.19-rc8
Docs/zh_CN: Update the translation of sparse to 5.19-rc8
Docs/zh_CN: Update the translation of kasan to 5.19-rc8
Docs/zh_CN: Update the translation of iio_configfs to 5.19-rc8
doc:it_IT: align Italian documentation
docs: Remove spurious tag from admin-guide/mm/overcommit-accounting.rst
Documentation: process: Update email client instructions for Thunderbird
docs: ABI: correct QEMU fw_cfg spec path
doc/zh_CN: remove submitting-driver reference from docs
docs: zh_TW: align to submitting-drivers removal
docs: zh_CN: align to submitting-drivers removal
docs: ko_KR: howto: remove reference to removed submitting-drivers
docs: ja_JP: howto: remove reference to removed submitting-drivers
docs: it_IT: align to submitting-drivers removal
docs: process: remove outdated submitting-drivers.rst
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes
- Callback-offload updates, perhaps most notably a new
RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be
offloaded at boot time, regardless of kernel boot parameters.
This is useful to battery-powered systems such as ChromeOS and
Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot
parameter prevents offloaded callbacks from interfering with
real-time workloads and with energy-efficiency mechanisms
- Polled grace-period updates, perhaps most notably making these APIs
account for both normal and expedited grace periods
- Tasks RCU updates, perhaps most notably reducing the CPU overhead of
RCU tasks trace grace periods by more than a factor of two on a
system with 15,000 tasks.
The reduction is expected to increase with the number of tasks, so it
seems reasonable to hypothesize that a system with 150,000 tasks
might see a 20-fold reduction in CPU overhead
- Torture-test updates
- Updates that merge RCU's dyntick-idle tracking into context tracking,
thus reducing the overhead of transitioning to kernel mode from
either idle or nohz_full userspace execution for kernels that track
context independently of RCU.
This is expected to be helpful primarily for kernels built with
CONFIG_NO_HZ_FULL=y
* tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits)
rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings
rcu: Diagnose extended sync_rcu_do_polled_gp() loops
rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings
rcutorture: Test polled expedited grace-period primitives
rcu: Add polled expedited grace-period primitives
rcutorture: Verify that polled GP API sees synchronous grace periods
rcu: Make Tiny RCU grace periods visible to polled APIs
rcu: Make polled grace-period API account for expedited grace periods
rcu: Switch polled grace-period APIs to ->gp_seq_polled
rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty
rcu/nocb: Add option to opt rcuo kthreads out of RT priority
rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread()
rcu/nocb: Add an option to offload all CPUs on boot
rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call
rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order
rcu/nocb: Add/del rdp to iterate from rcuog itself
rcu/tree: Add comment to describe GP-done condition in fqs loop
rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs()
rcu/kvfree: Remove useless monitor_todo flag
rcu: Cleanup RCU urgency state for offline CPU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Make proc files report fips module name and version
Algorithms:
- Move generic SHA1 code into lib/crypto
- Implement Chinese Remainder Theorem for RSA
- Remove blake2s
- Add XCTR with x86/arm64 acceleration
- Add POLYVAL with x86/arm64 acceleration
- Add HCTR2
- Add ARIA
Drivers:
- Add support for new CCP/PSP device ID in ccp"
* tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (89 commits)
crypto: tcrypt - Remove the static variable initialisations to NULL
crypto: arm64/poly1305 - fix a read out-of-bound
crypto: hisilicon/zip - Use the bitmap API to allocate bitmaps
crypto: hisilicon/sec - fix auth key size error
crypto: ccree - Remove a useless dma_supported() call
crypto: ccp - Add support for new CCP/PSP device ID
crypto: inside-secure - Add missing MODULE_DEVICE_TABLE for of
crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirq
crypto: testmgr - some more fixes to RSA test vectors
cyrpto: powerpc/aes - delete the rebundant word "block" in comments
hwrng: via - Fix comment typo
crypto: twofish - Fix comment typo
crypto: rmd160 - fix Kconfig "its" grammar
crypto: keembay-ocs-ecc - Drop if with an always false condition
Documentation: qat: rewrite description
Documentation: qat: Use code block for qat sysfs example
crypto: lib - add module license to libsha1
crypto: lib - make the sha1 library optional
crypto: lib - move lib/sha1.c into lib/crypto/
crypto: fips - make proc files report fips module name and version
...
|
|
CONFIG_KALLSYMS_ALL is required for kernel live patching which is a
common use case that is enabled in some major distros. Update the
Kconfig help text to reflect that.
While at it, s/e.g./i.e./ to match the text intention.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The difference in most compilers between `-O3` and `-O2` is mostly down
to whether loops with statically determinable trip counts are fully
unrolled vs unrolled to a multiple of SIMD width.
This patch is effectively a revert of
commit 15f5db60a137 ("kbuild,arc: add
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC") without re-adding
ARCH_CFLAGS
Ever since
commit cfdbc2e16e65 ("ARC: Build system: Makefiles, Kconfig, Linker
script")
ARC has been built with -O3, though the reason for doing so was not
specified in inline comments or the commit message. This commit does not
re-add -O3 to arch/arc/Makefile.
Folks looking to experiment with `-O3` (or any compiler flag for that
matter) may pass them along to the command line invocation of make:
$ make KCFLAGS=-O3
Code that looks to re-add an explicit Kconfig option for `-O3` should
provide:
1. A rigorous and reproducible performance profile of a reasonable
userspace workload that demonstrates a hot loop in the kernel that
would benefit from `-O3` over `-O2`.
2. Disassembly of said loop body before and after.
3. Provides stats on terms of increase in file size.
Link: https://lore.kernel.org/linux-kbuild/CA+55aFz2sNBbZyg-_i8_Ldr2e8o9dfvdSfHHuRzVtP2VMAUWPg@mail.gmail.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
3942a9bd7b58 ("locking, rcu, cgroup: Avoid synchronize_sched() in
__cgroup_procs_write()") disabled percpu operations on threadgroup_rwsem
because the impiled synchronize_rcu() on write locking was pushing up the
latencies too much for android which constantly moves processes between
cgroups.
This makes the hotter paths - fork and exit - slower as they're always
forced into the slow path. There is no reason to force this on everyone
especially given that more common static usage pattern can now completely
avoid write-locking the rwsem. Write-locking is elided when turning on and
off controllers on empty sub-trees and CLONE_INTO_CGROUP enables seeding a
cgroup without grabbing the rwsem.
Restore the default percpu operations and introduce the mount option
"favordynmods" and config option CGROUP_FAVOR_DYNMODS for users who need
lower latencies for the dynamic operations.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Michal Koutn� <mkoutny@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Dmitry Shmidt <dimitrysh@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
|
|
ctxt.2022.07.05a: Linux-kernel memory model development branch.
|
|
The gethostname system call returns the hostname for the current machine.
However, the kernel has no mechanism to initially set the current
machine's name in such a way as to guarantee that the first userspace
process to call gethostname will receive a meaningful result. It relies
on some unspecified userspace process to first call sethostname before
gethostname can produce a meaningful name.
Traditionally the machine's hostname is set from userspace by the init
system. The init system, in turn, often relies on a configuration file
(say, /etc/hostname) to provide the value that it will supply in the call
to sethostname. Consequently, the file system containing /etc/hostname
usually must be available before the hostname will be set. There may,
however, be earlier userspace processes that could call gethostname before
the file system containing /etc/hostname is mounted. Such a process will
get some other, likely meaningless, name from gethostname (such as
"(none)", "localhost", or "darkstar").
A real-world example where this can happen, and lead to undesirable
results, is with mdadm. When assembling arrays, mdadm distinguishes
between "local" arrays and "foreign" arrays. A local array is one that
properly belongs to the current machine, and a foreign array is one that
is (possibly temporarily) attached to the current machine, but properly
belongs to some other machine. To determine if an array is local or
foreign, mdadm may compare the "homehost" recorded on the array with the
current hostname. If mdadm is run before the root file system is mounted,
perhaps because the root file system itself resides on an md-raid array,
then /etc/hostname isn't yet available and the init system will not yet
have called sethostname, causing mdadm to incorrectly conclude that all of
the local arrays are foreign.
Solving this problem *could* be delegated to the init system. It could be
left up to the init system (including any init system that starts within
an initramfs, if one is in use) to ensure that sethostname is called
before any other userspace process could possibly call gethostname.
However, it may not always be obvious which processes could call
gethostname (for example, udev itself might not call gethostname, but it
could via udev rules invoke processes that do). Additionally, the init
system has to ensure that the hostname configuration value is stored in
some place where it will be readily accessible during early boot.
Unfortunately, every init system will attempt to (or has already attempted
to) solve this problem in a different, possibly incorrect, way. This
makes getting consistently working configurations harder for users.
I believe it is better for the kernel to provide the means by which the
hostname may be set early, rather than making this a problem for the init
system to solve. The option to set the hostname during early startup, via
a kernel parameter, provides a simple, reliable way to solve this problem.
It also could make system configuration easier for some embedded systems.
[dmoulding@me.com: v2]
Link: https://lkml.kernel.org/r/20220506060310.7495-2-dmoulding@me.com
Link: https://lkml.kernel.org/r/20220505180651.22849-2-dmoulding@me.com
Signed-off-by: Dan Moulding <dmoulding@me.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since the Linux RNG no longer uses sha1_transform(), the SHA-1 library
is no longer needed unconditionally. Make it possible to build the
Linux kernel without the SHA-1 library by putting it behind a kconfig
option, and selecting this new option from the kconfig options that gate
the remaining users: CRYPTO_SHA1 for crypto/sha1_generic.c, BPF for
kernel/bpf/core.c, and IPV6 for net/ipv6/addrconf.c.
Unfortunately, since BPF is selected by NET, for now this can only make
a difference for kernels built without networking support.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In init/Kconfig, the part dedicated to modules is quite large.
Move it into a dedicated Kconfig in kernel/module/
MODULES_TREE_LOOKUP was outside of the 'if MODULES', but as it is
only used when MODULES are set, move it in with everything else to
avoid confusion.
MODULE_SIG_FORMAT is left in init/Kconfig because this configuration
item is not used in kernel/modules/ but in kernel/ and can be
selected independently from CONFIG_MODULES. It is for instance
selected from security/integrity/ima/Kconfig.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Changeset f5461124d59b ("Documentation: move watch_queue to core-api")
renamed: Documentation/watch_queue.rst
to: Documentation/core-api/watch_queue.rst.
Update the cross-references accordingly.
Fixes: f5461124d59b ("Documentation: move watch_queue to core-api")
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/1c220de9c58f35e815a3df9458ac2bea323c8bfb.1656234456.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Fix the following Sparse warnings that got noticed when the PPC-dev
patchwork was checking another patch (see the link below):
init/main.c:862:1: warning: symbol 'randomize_kstack_offset' was not declared. Should it be static?
init/main.c:864:1: warning: symbol 'kstack_offset' was not declared. Should it be static?
Which in fact are triggered on all architectures that have
HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET support (for instances x86, arm64
etc).
Link: https://lore.kernel.org/lkml/e7b0d68b-914d-7283-827c-101988923929@huawei.com/T/#m49b2d4490121445ce4bf7653500aba59eefcb67f
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Fixes: 39218ff4c625 ("stack: Optionally randomize kernel stack offset each syscall")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220629060423.2515693-1-gongruiqi1@huawei.com
|
|
Context tracking is going to be used not only to track user transitions
but also idle/IRQs/NMIs. The user tracking part will then become a
separate feature. Prepare Kconfig for that.
[ frederic: Apply Max Filippov feedback. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
|
|
This commit adds fields to task_struct and to rcu_tasks_percpu that will
be used to avoid the task-list scan for RCU Tasks Trace grace periods,
and also initializes these fields.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
|
|
In commit 8b202ee21839 ("s390: disable -Warray-bounds") the s390 people
disabled the '-Warray-bounds' warning for gcc-12, because the new logic
in gcc would cause warnings for their use of the S390_lowcore macro,
which accesses absolute pointers.
It turns out gcc-12 has many other issues in this area, so this takes
that s390 warning disable logic, and turns it into a kernel build config
entry instead.
Part of the intent is that we can make this all much more targeted, and
use this conflig flag to disable it in only particular configurations
that cause problems, with the s390 case as an example:
select GCC12_NO_ARRAY_BOUNDS
and we could do that for other configuration cases that cause issues.
Or we could possibly use the CONFIG_CC_NO_ARRAY_BOUNDS thing in a more
targeted way, and disable the warning only for particular uses: again
the s390 case as an example:
KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_CC_NO_ARRAY_BOUNDS),-Wno-array-bounds)
but this ends up just doing it globally in the top-level Makefile, since
the current issues are spread fairly widely all over:
KBUILD_CFLAGS-$(CONFIG_CC_NO_ARRAY_BOUNDS) += -Wno-array-bounds
We'll try to limit this later, since the gcc-12 problems are rare enough
that *much* of the kernel can be built with it without disabling this
warning.
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull kthread updates from Eric Biederman:
"This updates init and user mode helper tasks to be ordinary user mode
tasks.
Commit 40966e316f86 ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
Here, commit 343f4c49f243 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple
enough to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace
thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code
sitting in linux-next"
* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched: Update task_tick_numa to ignore tasks without an mm
fork: Stop allowing kthreads to call execve
fork: Explicitly set PF_KTHREAD
init: Deal with the init process being a user mode process
fork: Generalize PF_IO_WORKER handling
fork: Explicity test for idle tasks in copy_thread
fork: Pass struct kernel_clone_args into copy_thread
kthread: Don't allocate kthread_struct for init and umh
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the Svpbmt extension, which allows memory attributes to
be encoded in pages
- Support for the Allwinner D1's implementation of page-based memory
attributes
- Support for running rv32 binaries on rv64 systems, via the compat
subsystem
- Support for kexec_file()
- Support for the new generic ticket-based spinlocks, which allows us
to also move to qrwlock. These should have already gone in through
the asm-geneic tree as well
- A handful of cleanups and fixes, include some larger ones around
atomics and XIP
* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
riscv: compat: Using seperated vdso_maps for compat_vdso_info
RISC-V: Fix the XIP build
RISC-V: Split out the XIP fixups into their own file
RISC-V: ignore xipImage
RISC-V: Avoid empty create_*_mapping definitions
riscv: Don't output a bogus mmu-type on a no MMU kernel
riscv: atomic: Add custom conditional atomic operation implementation
riscv: atomic: Optimize dec_if_positive functions
riscv: atomic: Cleanup unnecessary definition
RISC-V: Load purgatory in kexec_file
RISC-V: Add purgatory
RISC-V: Support for kexec_file on panic
RISC-V: Add kexec_file support
RISC-V: use memcpy for kexec_file mode
kexec_file: Fix kexec_file.c build error for riscv platform
riscv: compat: Add COMPAT Kbuild skeletal support
riscv: compat: ptrace: Add compat_arch_ptrace implement
riscv: compat: signal: Add rt_frame implementation
riscv: add memory-type errata for T-Head
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The majority of the changes are for fixes and clean ups.
Notable changes:
- Rework trace event triggers code to be easier to interact with.
- Support for embedding bootconfig with the kernel (as suppose to
having it embedded in initram). This is useful for embedded boards
without initram disks.
- Speed up boot by parallelizing the creation of tracefs files.
- Allow absolute ring buffer timestamps handle timestamps that use
more than 59 bits.
- Added new tracing clock "TAI" (International Atomic Time)
- Have weak functions show up in available_filter_function list as:
__ftrace_invalid_address___<invalid-offset> instead of using the
name of the function before it"
* tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (52 commits)
ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function
tracing: Fix comments for event_trigger_separate_filter()
x86/traceponit: Fix comment about irq vector tracepoints
x86,tracing: Remove unused headers
ftrace: Clean up hash direct_functions on register failures
tracing: Fix comments of create_filter()
tracing: Disable kcov on trace_preemptirq.c
tracing: Initialize integer variable to prevent garbage return value
ftrace: Fix typo in comment
ftrace: Remove return value of ftrace_arch_modify_*()
tracing: Cleanup code by removing init "char *name"
tracing: Change "char *" string form to "char []"
tracing/timerlat: Do not wakeup the thread if the trace stops at the IRQ
tracing/timerlat: Print stacktrace in the IRQ handler if needed
tracing/timerlat: Notify IRQ new max latency only if stop tracing is set
kprobes: Fix build errors with CONFIG_KRETPROBES=n
tracing: Fix return value of trace_pid_write()
tracing: Fix potential double free in create_var_ref()
tracing: Use strim() to remove whitespace instead of doing it manually
ftrace: Deal with error return code of the ftrace_process_locs() function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- Two follow-on fixes for the post-5.19 series "Use pageblock_order for
cma and alloc_contig_range alignment", from Zi Yan.
- A series of z3fold cleanups and fixes from Miaohe Lin.
- Some memcg selftests work from Michal Koutný <mkoutny@suse.com>
- Some swap fixes and cleanups from Miaohe Lin
- Several individual minor fixups
* tag 'mm-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
mm/shmem.c: suppress shift warning
mm: Kconfig: reorganize misplaced mm options
mm: kasan: fix input of vmalloc_to_page()
mm: fix is_pinnable_page against a cma page
mm: filter out swapin error entry in shmem mapping
mm/shmem: fix infinite loop when swap in shmem error at swapoff time
mm/madvise: free hwpoison and swapin error entry in madvise_free_pte_range
mm/swapfile: fix lost swap bits in unuse_pte()
mm/swapfile: unuse_pte can map random data if swap read fails
selftests: memcg: factor out common parts of memory.{low,min} tests
selftests: memcg: remove protection from top level memcg
selftests: memcg: adjust expected reclaim values of protected cgroups
selftests: memcg: expect no low events in unprotected sibling
selftests: memcg: fix compilation
mm/z3fold: fix z3fold_page_migrate races with z3fold_map
mm/z3fold: fix z3fold_reclaim_page races with z3fold_free
mm/z3fold: always clear PAGE_CLAIMED under z3fold page lock
mm/z3fold: put z3fold page back into unbuddied list when reclaim or migration fails
revert "mm/z3fold.c: allow __GFP_HIGHMEM in z3fold_alloc"
mm/z3fold: throw warning on failure of trylock_page in z3fold_alloc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"The non-MM patch queue for this merge window.
Not a lot of material this cycle. Many singleton patches against
various subsystems. Most notably some maintenance work in ocfs2
and initramfs"
* tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits)
kcov: update pos before writing pc in trace function
ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock
fs/ntfs: remove redundant variable idx
fat: remove time truncations in vfat_create/vfat_mkdir
fat: report creation time in statx
fat: ignore ctime updates, and keep ctime identical to mtime in memory
fat: split fat_truncate_time() into separate functions
MAINTAINERS: add Muchun as a memcg reviewer
proc/sysctl: make protected_* world readable
ia64: mca: drop redundant spinlock initialization
tty: fix deadlock caused by calling printk() under tty_port->lock
relay: remove redundant assignment to pointer buf
fs/ntfs3: validate BOOT sectors_per_clusters
lib/string_helpers: fix not adding strarray to device's resource list
kernel/crash_core.c: remove redundant check of ck_cmdline
ELF, uapi: fixup ELF_ST_TYPE definition
ipc/mqueue: use get_tree_nodev() in mqueue_get_tree()
ipc: update semtimedop() to use hrtimer
ipc/sem: remove redundant assignments
...
|
|
After commits 7b42f1041c98 ("mm: Kconfig: move swap and slab config
options to the MM section") and 519bcb797907 ("mm: Kconfig: group swap,
slab, hotplug and thp options into submenus") we now have nicely organized
mm related config options. I have noticed some that were still misplaced,
so this moves them from various places into the new structure:
VM_EVENT_COUNTERS, COMPAT_BRK, MMAP_ALLOW_UNINITIALIZED to mm/Kconfig and
general MM section.
SLUB_STATS to mm/Kconfig and the slab submenu.
DEBUG_SLAB, SLUB_DEBUG, SLUB_DEBUG_ON to mm/Kconfig.debug and the Kernel
hacking / Memory Debugging submenu.
Link: https://lkml.kernel.org/r/20220525112559.1139-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
- It was time to tidy up kernel/module.c and one way of starting with
that effort was to split it up into files. At my request Aaron Tomlin
spearheaded that effort with the goal to not introduce any functional
at all during that endeavour. The penalty for the split is +1322
bytes total, +112 bytes in data, +1210 bytes in text while bss is
unchanged. One of the benefits of this other than helping make the
code easier to read and review is summoning more help on review for
changes with livepatching so kernel/module/livepatch.c is now pegged
as maintained by the live patching folks.
The before and after with just the move on a defconfig on x86-64:
$ size kernel/module.o
text data bss dec hex filename
38434 4540 104 43078 a846 kernel/module.o
$ size -t kernel/module/*.o
text data bss dec hex filename
4785 120 0 4905 1329 kernel/module/kallsyms.o
28577 4416 104 33097 8149 kernel/module/main.o
1158 8 0 1166 48e kernel/module/procfs.o
902 108 0 1010 3f2 kernel/module/strict_rwx.o
3390 0 0 3390 d3e kernel/module/sysfs.o
832 0 0 832 340 kernel/module/tree_lookup.o
39644 4652 104 44400 ad70 (TOTALS)
- Aaron added module unload taint tracking (MODULE_UNLOAD_TAINT_TRACKING),
to enable tracking unloaded modules which did taint the kernel.
- Christophe Leroy added CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
which lets architectures to request having modules data in vmalloc
area instead of module area. There are three reasons why an
architecture might want this:
a) On some architectures (like book3s/32) it is not possible to
protect against execution on a page basis. The exec stuff can be
mapped by different arch segment sizes (on book3s/32 that is 256M
segments). By default the module area is in an Exec segment while
vmalloc area is in a NoExec segment. Using vmalloc lets you muck
with module data as NoExec on those architectures whereas before
you could not.
b) By pushing more module data to vmalloc you also increase the
probability of module text to remain within a closer distance
from kernel core text and this reduces trampolines, this has been
reported on arm first and powerpc folks are following that lead.
c) Free'ing module_alloc() (Exec by default) area leaves this
exposed as Exec by default, some architectures have some security
enhancements to set this as NoExec on free, and splitting module
data with text let's future generic special allocators be added
to the kernel without having developers try to grok the tribal
knowledge per arch. Work like Rick Edgecombe's permission vmalloc
interface [0] becomes easier to address over time.
[0] https://lore.kernel.org/lkml/20201120202426.18009-1-rick.p.edgecombe@intel.com/#r
- Masahiro Yamada's symbol search enhancements
* tag 'modules-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (33 commits)
module: merge check_exported_symbol() into find_exported_symbol_in_section()
module: do not binary-search in __ksymtab_gpl if fsa->gplok is false
module: do not pass opaque pointer for symbol search
module: show disallowed symbol name for inherit_taint()
module: fix [e_shstrndx].sh_size=0 OOB access
module: Introduce module unload taint tracking
module: Move module_assert_mutex_or_preempt() to internal.h
module: Make module_flags_taint() accept a module's taints bitmap and usable outside core code
module.h: simplify MODULE_IMPORT_NS
powerpc: Select ARCH_WANTS_MODULES_DATA_IN_VMALLOC on book3s/32 and 8xx
module: Remove module_addr_min and module_addr_max
module: Add CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
module: Introduce data_layout
module: Prepare for handling several RB trees
module: Always have struct mod_tree_root
module: Rename debug_align() as strict_align()
module: Rework layout alignment to avoid BUG_ON()s
module: Move module_enable_x() and frob_text() in strict_rwx.c
module: Make module_enable_x() independent of CONFIG_ARCH_HAS_STRICT_MODULE_RWX
module: Move version support into a separate file
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"For two kernel releases now kernel/sysctl.c has been being cleaned up
slowly, since the tables were grossly long, sprinkled with tons of
#ifdefs and all this caused merge conflicts with one susbystem or
another.
This tree was put together to help try to avoid conflicts with these
cleanups going on different trees at time. So nothing exciting on this
pull request, just cleanups.
Thanks a lot to the Uniontech and Huawei folks for doing some of this
nasty work"
* tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (28 commits)
sched: Fix build warning without CONFIG_SYSCTL
reboot: Fix build warning without CONFIG_SYSCTL
kernel/kexec_core: move kexec_core sysctls into its own file
sysctl: minor cleanup in new_dir()
ftrace: fix building with SYSCTL=y but DYNAMIC_FTRACE=n
fs/proc: Introduce list_for_each_table_entry for proc sysctl
mm: fix unused variable kernel warning when SYSCTL=n
latencytop: move sysctl to its own file
ftrace: fix building with SYSCTL=n but DYNAMIC_FTRACE=y
ftrace: Fix build warning
ftrace: move sysctl_ftrace_enabled to ftrace.c
kernel/do_mount_initrd: move real_root_dev sysctls to its own file
kernel/delayacct: move delayacct sysctls to its own file
kernel/acct: move acct sysctls to its own file
kernel/panic: move panic sysctls to its own file
kernel/lockdep: move lockdep sysctls to its own file
mm: move page-writeback sysctls to their own file
mm: move oom_kill sysctls to their own file
kernel/reboot: move reboot sysctls to its own file
sched: Move energy_aware sysctls to topology.c
...
|
|
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
* tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits)
genksyms: adjust the output format to modpost
kbuild: stop merging *.symversions
kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
modpost: extract symbol versions from *.cmd files
modpost: add sym_find_with_module() helper
modpost: change the license of EXPORT_SYMBOL to bool type
modpost: remove left-over cross_compile declaration
kbuild: record symbol versions in *.cmd files
kbuild: generate a list of objects in vmlinux
modpost: move *.mod.c generation to write_mod_c_files()
modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header
scripts/prune-kernel: Use kernel-install if available
kbuild: factor out the common installation code into scripts/install.sh
modpost: split new_symbol() to symbol allocation and hash table addition
modpost: make sym_add_exported() always allocate a new symbol
modpost: make multiple export error
modpost: dump Module.symvers in the same order of modules.order
modpost: traverse the namespace_list in order
modpost: use doubly linked list for dump_lists
modpost: traverse unresolved symbols in order
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture
we supported that has no MMU implementation, but there are still a
few architectures (arm, m68k, riscv, sh and xtensa) that support
CPUs with and without an MMU.
- A series to add a generic ticket spinlock that can be shared by
most architectures with a working cmpxchg or ll/sc type atomic,
including the conversion of riscv, csky and openrisc. This series
is also a prerequisite for the loongarch64 architecture port that
will come as a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers"
* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
h8300: remove stale bindings and symlink
sparc: add asm/stat.h to UAPI compile-test coverage
powerpc: add asm/stat.h to UAPI compile-test coverage
mips: add asm/stat.h to UAPI compile-test coverage
riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
agpgart.h: do not include <stdlib.h> from exported header
csky: Move to generic ticket-spinlock
RISC-V: Move to queued RW locks
RISC-V: Move to generic spinlocks
openrisc: Move to ticket-spinlock
asm-generic: qrwlock: Document the spinlock fairness requirements
asm-generic: qspinlock: Indicate the use of mixed-size atomics
asm-generic: ticket-lock: New generic ticket-based spinlock
remove the h8300 architecture
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Conversion of slub_debug stack traces to stackdepot, allowing more
useful debugfs-based inspection for e.g. memory leak debugging.
Allocation and free debugfs info now includes full traces and is
sorted by the unique trace frequency.
The stackdepot conversion was already attempted last year but
reverted by ae14c63a9f20. The memory overhead (while not actually
enabled on boot) has been meanwhile solved by making the large
stackdepot allocation dynamic. The xfstest issues haven't been
reproduced on current kernel locally nor in -next, so the slab cache
layout changes that originally made that bug manifest were probably
not the root cause.
- Refactoring of dma-kmalloc caches creation.
- Trivial cleanups such as removal of unused parameters, fixes and
clarifications of comments.
- Hyeonggon Yoo joins as a reviewer.
* tag 'slab-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
MAINTAINERS: add myself as reviewer for slab
mm/slub: remove unused kmem_cache_order_objects max
mm: slab: fix comment for __assume_kmalloc_alignment
mm: slab: fix comment for ARCH_KMALLOC_MINALIGN
mm/slub: remove unneeded return value of slab_pad_check
mm/slab_common: move dma-kmalloc caches creation into new_kmalloc_cache()
mm/slub: remove meaningless node check in ___slab_alloc()
mm/slub: remove duplicate flag in allocate_slab()
mm/slub: remove unused parameter in setup_object*()
mm/slab.c: fix comments
slab, documentation: add description of debugfs files for SLUB caches
mm/slub: sort debugfs output by frequency of stack traces
mm/slub: distinguish and print stack traces in debugfs files
mm/slub: use stackdepot to save stack trace in objects
mm/slub: move struct track init out of set_track()
lib/stackdepot: allow requesting early initialization dynamically
mm/slub, kunit: Make slub_kunit unaffected by user specified flags
mm/slab: remove some unused functions
|
|
include/{linux,asm-generic}/export.h defines a weak symbol, __crc_*
as a placeholder.
Genksyms writes the version CRCs into the linker script, which will be
used for filling the __crc_* symbols. The linker script format depends
on CONFIG_MODULE_REL_CRCS. If it is enabled, __crc_* holds the offset
to the reference of CRC.
It is time to get rid of this complexity.
Now that modpost parses text files (.*.cmd) to collect all the CRCs,
it can generate C code that will be linked to the vmlinux or modules.
Generate a new C file, .vmlinux.export.c, which contains the CRCs of
symbols exported by vmlinux. It is compiled and linked to vmlinux in
scripts/link-vmlinux.sh.
Put the CRCs of symbols exported by modules into the existing *.mod.c
files. No additional build step is needed for modules. As before,
*.mod.c are compiled and linked to *.ko in scripts/Makefile.modfinal.
No linker magic is used here. The new C implementation works in the
same way, whether CONFIG_RELOCATABLE is enabled or not.
CONFIG_MODULE_REL_CRCS is no longer needed.
Previously, Kbuild invoked additional $(LD) to update the CRCs in
objects, but this step is unneeded too.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
These are currently under General Setup. MM seems like a better fit.
Link: https://lkml.kernel.org/r/20220510152847.230957-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, start_kernel() adds latent entropy and the command line to
the entropy bool *after* the RNG has been initialized, deferring when
it's actually used by things like stack canaries until the next time
the pool is seeded. This surely is not intended.
Rather than splitting up which entropy gets added where and when between
start_kernel() and random_init(), just do everything in random_init(),
which should eliminate these kinds of bugs in the future.
While we're at it, rename the awkwardly titled "rand_initialize()" to
the more standard "random_init()" nomenclature.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Currently time_init() is called after rand_initialize(), but
rand_initialize() makes use of the timer on various platforms, and
sometimes this timer needs to be initialized by time_init() first. In
order for random_get_entropy() to not return zero during early boot when
it's potentially used as an entropy source, reverse the order of these
two calls. The block doing random initialization was right before
time_init() before, so changing the order shouldn't have any complicated
effects.
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
We used to have USERFAULTFD configs stored in init/. It makes sense as a
start because that's the default place for storing syscall related
configs.
However userfaultfd evolved a bit in the past few years and some more
config options were added. They're no longer related to syscalls and
start to be not suitable to be kept in the init/ directory anymore,
because they're pure mm concepts.
But it's not ideal either to keep the userfaultfd configs separate from
each other. Hence this patch moves the userfaultfd configs under init/ to
be under mm/ so that we'll start to group all userfaultfd configs
together.
We do have quite a few examples of syscall related configs that are not
put under init/Kconfig: FTRACE_SYSCALLS, SWAP, FILE_LOCKING,
MEMFD_CREATE.. They all reside in the dir where they're more suitable for
the concept. So it seems there's no restriction to keep the role of
having syscall related CONFIG_* under init/ only.
Link: https://lkml.kernel.org/r/20220420144823.35277-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, only the initial module that tainted the kernel is
recorded e.g. when an out-of-tree module is loaded.
The purpose of this patch is to allow the kernel to maintain a record of
each unloaded module that taints the kernel. So, in addition to
displaying a list of linked modules (see print_modules()) e.g. in the
event of a detected bad page, unloaded modules that carried a taint/or
taints are displayed too. A tainted module unload count is maintained.
The number of tracked modules is not fixed. This feature is disabled by
default.
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Add support for extraction of checksum-enabled "070702" cpio archives,
specified in Documentation/driver-api/early-userspace/buffer-format.rst.
Fail extraction if the calculated file data checksum doesn't match the
value carried in the header.
Link: https://lkml.kernel.org/r/20220404093429.27570-7-ddiss@suse.de
Signed-off-by: David Disseldorp <ddiss@suse.de>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Martin Wilck <mwilck@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
initramfs cpio mtime preservation, as implemented in commit 889d51a10712
("initramfs: add option to preserve mtime from initramfs cpio images"),
uses a linked list to defer directory mtime processing until after all
other items in the cpio archive have been processed. This is done to
ensure that parent directory mtimes aren't overwritten via subsequent
child creation.
The lkml link below indicates that the mtime retention use case was for
embedded devices with applications running exclusively out of initramfs,
where the 32-bit mtime value provided a rough file version identifier.
Linux distributions which discard an extracted initramfs immediately after
the root filesystem has been mounted may want to avoid the unnecessary
overhead.
This change adds a new INITRAMFS_PRESERVE_MTIME Kconfig option, which can
be used to disable on-by-default mtime retention and in turn speed up
initramfs extraction, particularly for cpio archives with large directory
counts.
Benchmarks with a one million directory cpio archive extracted 20 times
demonstrated:
mean extraction time (s) std dev
INITRAMFS_PRESERVE_MTIME=y 3.808 0.006
INITRAMFS_PRESERVE_MTIME unset 3.056 0.004
The above extraction times were measured using ftrace (initcall_finish -
initcall_start) values for populate_rootfs() with initramfs_async
disabled.
[ddiss@suse.de: rebase atop dir_entry.name flexible array member and drop separate initramfs_mtime.h header]
Link: https://lkml.org/lkml/2008/9/3/424
Link: https://lkml.kernel.org/r/20220404093429.27570-4-ddiss@suse.de
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
dir_entry.name is currently allocated via a separate kstrdup(). Change it
to a flexible array member and allocate it along with struct dir_entry.
Link: https://lkml.kernel.org/r/20220404093429.27570-3-ddiss@suse.de
Signed-off-by: David Disseldorp <ddiss@suse.de>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "initramfs: "crc" cpio format and INITRAMFS_PRESERVE_MTIME", v7.
This patchset does some minor initramfs refactoring and allows cpio entry
mtime preservation to be disabled via a new Kconfig
INITRAMFS_PRESERVE_MTIME option.
Patches 4/6 to 6/6 implement support for creation and extraction of "crc"
cpio archives, which carry file data checksums. Basic tests for this
functionality can be found at https://github.com/rapido-linux/rapido/pull/163
This patch (of 6):
do_header() is called for each cpio entry and fails if the first six bytes
don't match "newc" magic. The magic check includes a special case error
message if POSIX.1 ASCII (cpio -H odc) magic is detected. This special
case POSIX.1 check can be nested under the "newc" mismatch code path to
avoid calling memcmp() twice in a non-error case.
Link: https://lkml.kernel.org/r/20220404093429.27570-1-ddiss@suse.de
Link: https://lkml.kernel.org/r/20220404093429.27570-2-ddiss@suse.de
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is silly for user_mode_thread to leave PF_KTHREAD set
on the resulting task. Update the init process so that
it does not care if PF_KTHREAD is set or not.
Ensure do_populate_rootfs flushes all delayed fput work by calling
task_work_run. In the rare instance that async_schedule_domain calls
do_populate_rootfs synchronously it is possible do_populate_rootfs
will be called directly from the init process. At which point fput
will call "task_work_add(current, ..., TWA_RESUME)". The files on the
initramfs need to be completely put before we attempt to exec them
(which is before the code enters userspace). So call task_work_run
just in case there are any pending fput operations.
Link: https://lkml.kernel.org/r/20220506141512.516114-5-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
If kthread_is_per_cpu runs concurrently with free_kthread_struct the
kthread_struct that was just freed may be read from.
This bug was introduced by commit 40966e316f86 ("kthread: Ensure
struct kthread is present for all kthreads"). When kthread_struct
started to be allocated for all tasks that have PF_KTHREAD set. This
in turn required the kthread_struct to be freed in kernel_execve and
violated the assumption that kthread_struct will have the same
lifetime as the task.
Looking a bit deeper this only applies to callers of kernel_execve
which is just the init process and the user mode helper processes.
These processes really don't want to be kernel threads but are for
historical reasons. Mostly that copy_thread does not know how to take
a kernel mode function to the process with for processes without
PF_KTHREAD or PF_IO_WORKER set.
Solve this by not allocating kthread_struct for the init process and
the user mode helper processes.
This is done by adding a kthread member to struct kernel_clone_args.
Setting kthread in fork_idle and kernel_thread. Adding
user_mode_thread that works like kernel_thread except it does not set
kthread. In fork only allocating the kthread_struct if .kthread is set.
I have looked at kernel/kthread.c and since commit 40966e316f86
("kthread: Ensure struct kthread is present for all kthreads") there
have been no assumptions added that to_kthread or __to_kthread will
not return NULL.
There are a few callers of to_kthread or __to_kthread that assume a
non-NULL struct kthread pointer will be returned. These functions are
kthread_data(), kthread_parmme(), kthread_exit(), kthread(),
kthread_park(), kthread_unpark(), kthread_stop(). All of those functions
can reasonably expected to be called when it is know that a task is a
kthread so that assumption seems reasonable.
Cc: stable@vger.kernel.org
Fixes: 40966e316f86 ("kthread: Ensure struct kthread is present for all kthreads")
Reported-by: Максим Кутявин <maximkabox13@gmail.com>
Link: https://lkml.kernel.org/r/20220506141512.516114-1-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The uselib syscall has been long deprecated. There's no need to keep this
enabled by default under X86_32.
Link: https://lkml.kernel.org/r/20220412212519.4113845-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This allows kernel developer to embed a default bootconfig file in
the kernel instead of embedding it in the initrd. This will be good
for who are using the kernel without initrd, or who needs a default
bootconfigs.
This needs to set two kconfigs: CONFIG_BOOT_CONFIG_EMBED=y and set
the file path to CONFIG_BOOT_CONFIG_EMBED_FILE.
Note that you still need 'bootconfig' command line option to load the
embedded bootconfig. Also if you boot using an initrd with a different
bootconfig, the kernel will use the bootconfig in the initrd, instead
of the default bootconfig.
Link: https://lkml.kernel.org/r/164921227943.1090670.14035119557571329218.stgit@devnote2
Cc: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Linux Kbuild mailing list <linux-kbuild@vger.kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Check the bootconfig's checksum before removing the bootconfig data
from initrd to avoid modifying initrd by mistake.
This will also simplifies the get_boot_config_from_initrd() interface.
Link: https://lkml.kernel.org/r/164921226891.1090670.16955839243639298134.stgit@devnote2
Cc: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Linux Kbuild mailing list <linux-kbuild@vger.kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
