summaryrefslogtreecommitdiff
path: root/include/uapi/drm
AgeCommit message (Collapse)Author
2018-12-11drm/msm: add uapi to get/set debug nameRob Clark
Add UAPI to get/set GEM objects' debug name. Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-12-11drm/msm: rework GEM_INFO ioctlRob Clark
Prep work to add a way to get/set the GEM objects debug name. Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-12-11drm/msm/gpu: add submit flag to hint which buffers should be dumpedRob Clark
To lower CPU overhead, future userspace will be switching to pinning iova and avoiding the use of relocs, and only include cmds table entries for IB1 level cmdstream (but not IB2 or state-groups). This leaves the kernel unsure what to dump for rd/hangrd cmdstream dumping. So add a MSM_SUBMIT_BO_DUMP flag so userspace can indicate buffers that contain cmdstream (or are otherwise important to dump). Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-12-07Merge tag 'drm-misc-next-2018-12-06' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next Final changes to drm-misc-next for v4.21: UAPI Changes: Core Changes: - Add dma_fence_get_stub to dma-buf, and use it in drm/syncobj. - Add and use DRM_MODESET_LOCK_BEGIN/END helpers. - Small fixes to drm_atomic_helper_resume(), drm_mode_setcrtc() and drm_atomic_helper_commit_duplicated_state() - Fix drm_atomic_state_helper.[c] extraction. Driver Changes: - Small fixes to tinydrm, vkms, meson, rcar-du, virtio, vkms, v3d, and pl111. - vc4: Allow scaling and YUV formats on cursor planes. - v3d: Enable use of the Texture Formatting Unit, and fix prime imports of buffers from other drivers. - Add support for the AUO G101EVN010 panel. - sun4i: Enable support for the H6 display engine. Signed-off-by: Dave Airlie <airlied@redhat.com> [airlied: added drm/v3d: fix broken build to the merge commit] From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/321be9d3-ab75-5f92-8193-e5113662edef@linux.intel.com
2018-12-05drm: Add a new plane property to send damage during plane updateLukasz Spintzyk
FB_DAMAGE_CLIPS is an optional plane property to mark damaged regions on the plane in framebuffer coordinates of the framebuffer attached to the plane. The layout of blob data is simply an array of "struct drm_mode_rect". Unlike plane src coordinates, damage clips are not in 16.16 fixed point. As plane src in framebuffer cannot be negative so are damage clips. In damage clip, x1/y1 are inclusive and x2/y2 are exclusive. This patch also exports the kernel internal drm_rect to userspace as drm_mode_rect. This is because "struct drm_clip_rect" is not sufficient to represent damage for current plane size. Driver which are interested in enabling FB_DAMAGE_CLIPS property for a plane should enable this property using drm_plane_enable_damage_clips. v2: - Input validation on damage clips against framebuffer size. - Doc update, other minor changes. Signed-off-by: Lukasz Spintzyk <lukasz.spintzyk@displaylink.com> Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-11-30drm/v3d: Add support for submitting jobs to the TFU.Eric Anholt
The TFU can copy from raster, UIF, and SAND input images to UIF output images, with optional mipmap generation. This will certainly be useful for media EGL image input, but is also useful immediately for mipmap generation without bogging the V3D core down. For now we only run the queue 1 job deep, and don't have any hang recovery (though I don't think we should need it, with TFU). Queuing multiple jobs in the HW will require synchronizing the YUV coefficient regs updates since they don't get FIFOed with the job. v2: Change the ioctl to IOW instead of IOWR, always set COEF0, explain why TFU is AUTH, clarify the syncing docs, drop the unused TFU interrupt regs (you're expected to use the hub's), don't take &bo->base for NULL bos. v3: Fix a little whitespace alignment (noticed by checkpatch), rebase on drm_sched_job_cleanup() changes. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Dave Emett <david.emett@broadcom.com> (v2) Link: https://patchwork.freedesktop.org/patch/264607/
2018-11-29Merge tag 'drm-misc-next-2018-11-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.21: Core Changes: - Merge drm_info.c into drm_debugfs.c - Complete the fake drm_crtc_commit's hw_done/flip_done sooner. - Remove deprecated drm_obj_ref/unref functions. All drivers use get/put now. - Decrease stack use of drm_gem_prime_mmap. - Improve documentation for dumb callbacks. Driver Changes: - Add edid support to virtio. - Wait on implicit fence in meson and sun4i. - Add support for BGRX8888 to sun4i. - Preparation patches for sun4i driver to start supporting linear and tiled YUV formats. - Add support for HDMI 1.4 4k modes to meson, and support for VIC alternate timings. - Drop custom dumb_map in vkms. - Small fixes and cleanups to v3d. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/151a3270-b1be-ed75-bd58-6b29d741f592@linux.intel.com
2018-11-29Merge tag 'drm-intel-next-2018-11-22' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Changes outside i915: - Connector property to limit max bpc (Radhakrishna) - Fix LPE audio runtime PM and deinit (Ville) - DP FEC prep work (Anusha) - Mark pinned shmemfs pages as unevictable (Kuo-Hsin) - Backmerge drm-next (Jani) Inside i915: - Revert OA UAPI change that lacks userspace (Joonas) - Register macro cleanup (Jani) - 32-bit build fixes on pin flags (Chris) - Fix MG DP mode and PHY gating for HDMI (Imre) - DP MST race, hpd and irq fixes (Lyude) - Combo PHY fixes and cleanup (Imre, Lucas) - Move display init and cleanup under modeset init and cleanup (José) - PSR fixes (José) - Subslice size fixes (Daniele) - Abstract and clean up fixed point helpers (Jani) - Plane input CSC for YUV to RGB conversion (Uma) - Break long iterations for get/put shmemfs pages (Chris) - Improve DDI encoder hw state readout sanity checks (Imre) - Fix power well leaks for MST (José) - Scaler fixes (Ville) - Watermark fixes (Ville) - Fix VLV/CHV DSI panel orientation readout (Ville) - ICL rawclock fixes (Paulo) - Workaround DMC power well request issues (Imre) - Plane allocation fix (Maarten) - Transcoder enum value/ordering robustness fixes (Imre) - UTS_RELEASE build dependency fix (Hans Holmberg) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87k1l4cesj.fsf@intel.com
2018-11-27drm/v3d: Fix whitespace inconsistency in the header.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181108161654.19888-2-eric@anholt.net Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-11-22Merge tag 'drm-misc-next-2018-11-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.21, part 2: UAPI Changes: - Remove syncobj timeline support from drm. Cross-subsystem Changes: - Document canvas provider node in the DT bindings. - Improve documentation for TPO TPG110 DT bindings. Core Changes: - Use explicit state in drm atomic functions. - Add panel quirk for new GPD Win2 firmware. - Add DRM_FORMAT_XYUV8888. - Set the default import/export function in prime to drm_gem_prime_import/export. - Add a separate drm_gem_object_funcs, to stop relying on dev->driver->*gem* functions. - Make sure that tinydrm sets the virtual address also on imported buffers. Driver Changes: - Support active-low data enable signal in sun4i. - Fix scaling in vc4. - Use canvas provider node in meson. - Remove unused variables in sti and qxl and cirrus. - Add overlay plane support and primary plane scaling to meson. - i2c fixes in drm/bridge/sii902x - Fix mailbox read size in rockchip. - Spelling fix in panel/s6d16d0. - Remove unnecessary null check from qxl_bo_unref. - Remove unused arguments from qxl_bo_pin. - Fix qxl cursor pinning. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9c0409e3-a85f-d2af-b4eb-baf1eb8bbae4@linux.intel.com
2018-11-20drm: Introduce new DRM_FORMAT_XYUVStanislav Lisovskiy
v5: This is YUV444 packed format same as AYUV, but without alpha, as supported by i915. v6: Removed unneeded initializer for new XYUV format. v7: Added is_yuv field initialization according to latest drm_fourcc format structure initialization changes. v8: Edited commit message to be more clear about skl+, renamed PLANE_CTL_FORMAT_AYUV to PLANE_CTL_FORMAT_XYUV as this format doesn't support per-pixel alpha. Fixed minor code issues. v9: Moved DRM format check to proper place in intel_framebuffer_init. v10: Changed DRM_FORMAT_XYUV to be DRM_FORMAT_XYUV8888 v11: Fixed rebase conflict, caused by added new formats to drm-tip meanwhile. Reviewed-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> [vsyrjala: Removed stray tab and sorted the formats differently] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181109093916.25858-2-stanislav.lisovskiy@intel.com
2018-11-20Merge drm/drm-next into drm-intel-next-queuedJani Nikula
Pull in v4.20-rc3 via drm-next. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-11-19Revert "drm/i915/perf: add a parameter to control the size of OA buffer"Joonas Lahtinen
Userspace portion is still missing. This reverts commit cd956bfcd0f58d20485ac0a785415f7d9327a95f. Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181116135510.13807-1-joonas.lahtinen@linux.intel.com
2018-11-19Merge branch 'drm-next-4.21' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next New features for 4.21: amdgpu: - Support for SDMA paging queue on vega - Put compute EOP buffers into vram for better performance - Share more code with amdkfd - Support for scanout with DCC on gfx9 - Initial kerneldoc for DC - Updated SMU firmware support for gfx8 chips - Rework CSA handling for eventual support for preemption - XGMI PSP support - Clean up RLC handling - Enable GPU reset by default on VI, SOC15 dGPUs - Ring and IB test cleanups amdkfd: - Share more code with amdgpu ttm: - Move global init out of the drivers scheduler: - Track if schedulers are ready for work - Timeout/fault handling changes to facilitate GPU recovery Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114165113.3751-1-alexander.deucher@amd.com
2018-11-14drm/virtio: add in/out fence support for explicit synchronizationRobert Foss
When the execbuf call receives an in-fence it will get the dma_fence related to that fence fd and wait on it before submitting the draw call. On the out-fence side we get fence returned by the submitted draw call and attach it to a sync_file and send the sync_file fd to userspace. On error -1 is returned to userspace. VIRTGPU_EXECBUF_FENCE_FD_IN & VIRTGPU_EXECBUF_FENCE_FD_OUT are supported at the simultaneously and can be flagged for simultaneously. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Robert Foss <robert.foss@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20181112165157.32765-4-robert.foss@collabora.com Suggested-by: Rob Herring <robh@kernel.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-14drm/virtio: add uapi for in and out explicit fencesRobert Foss
Add a new field called fence_fd that will be used by userspace to send in-fences to the kernel and receive out-fences created by the kernel. This uapi enables virtio to take advantage of explicit synchronization of dma-bufs. There are two new flags: * VIRTGPU_EXECBUF_FENCE_FD_IN to be used when passing an in-fence fd. * VIRTGPU_EXECBUF_FENCE_FD_OUT to be used when requesting an out-fence fd The execbuffer IOCTL is now read-write to allow the userspace to read the out-fence. On error -1 should be returned in the fence_fd field. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Robert Foss <robert.foss@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20181112165157.32765-3-robert.foss@collabora.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-08drm/syncobj: disable the timeline UAPI for now v2Christian König
Until we have sorted out all problems. v2: return -EINVAL during create if flag is set. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/260937/
2018-11-05drm/amdgpu: Add DCC flags for GFX9 amdgpu_boNicholas Kazlauskas
[Why] Hardware support for Delta Color Compression (DCC) decompression is available in DC for GFX9 but there's no way for userspace to enable the feature. Enabling the feature can provide improved GFX performance and power savings in many situations. [How] Extend the GFX9 tiling flags to include DCC parameters. These are logically grouped together with tiling flags even if they are technically distinct. This trivially maintains backwards compatibility with existing users of amdgpu_gem_metadata. No new IOCTls or data structures are needed to support DCC. This patch helps expose DCC attributes to both libdrm and amdgpu_dm. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-02drm/fourcc: Add fourcc for Mali linear tiled formatsAlexandru Gheorghe
Mali-DP implements a number of tiled yuv formats which are not currently described in drm_fourcc.h. This adds those definitions and describes their memory layout by using the newly added char_per_block, block_w, block_h. Reviewed-by: Brian Starkey <brian.starkey@arm.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-3-alexandru-cosmin.gheorghe@arm.com
2018-11-02Merge drm/drm-next into drm-intel-next-queuedJani Nikula
Although there's nothing crucial missing, it's been a long time since the last backmerge. Catch up with drm-next. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-10-24Merge drm/drm-next into drm-misc-nextSean Paul
4.19 is out, Lyude asked for a backmerge, and it's been a while. All very good reasons on their own :-) Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-10-23drm/i915/perf: add a parameter to control the size of OA bufferLionel Landwerlin
The way our hardware is designed doesn't seem to let us use the MI_RECORD_PERF_COUNT command without setting up a circular buffer. In the case where the user didn't request OA reports to be available through the i915 perf stream, we can set the OA buffer to the minimum size to avoid consuming memory which won't be used by the driver. v2: Simplify oa buffer size exponent selection (Chris) Reuse vma size field (Lionel) v3: Restrict size opening parameter to values supported by HW (Chris) v4: Drop out of date comment (Matt) Add debug message when buffer size is rejected (Matt) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181023100707.31738-5-lionel.g.landwerlin@intel.com
2018-10-18drm: add syncobj timeline support v9Chunming Zhou
This patch is for VK_KHR_timeline_semaphore extension, semaphore is called syncobj in kernel side: This extension introduces a new type of syncobj that has an integer payload identifying a point in a timeline. Such timeline syncobjs support the following operations: * CPU query - A host operation that allows querying the payload of the timeline syncobj. * CPU wait - A host operation that allows a blocking wait for a timeline syncobj to reach a specified value. * Device wait - A device operation that allows waiting for a timeline syncobj to reach a specified value. * Device signal - A device operation that allows advancing the timeline syncobj to a specified value. v1: Since it's a timeline, that means the front time point(PT) always is signaled before the late PT. a. signal PT design: Signal PT fence N depends on PT[N-1] fence and signal opertion fence, when PT[N] fence is signaled, the timeline will increase to value of PT[N]. b. wait PT design: Wait PT fence is signaled by reaching timeline point value, when timeline is increasing, will compare wait PTs value with new timeline value, if PT value is lower than timeline value, then wait PT will be signaled, otherwise keep in list. syncobj wait operation can wait on any point of timeline, so need a RB tree to order them. And wait PT could ahead of signal PT, we need a sumission fence to perform that. v2: 1. remove unused DRM_SYNCOBJ_CREATE_TYPE_NORMAL. (Christian) 2. move unexposed denitions to .c file. (Daniel Vetter) 3. split up the change to drm_syncobj_find_fence() in a separate patch. (Christian) 4. split up the change to drm_syncobj_replace_fence() in a separate patch. 5. drop the submission_fence implementation and instead use wait_event() for that. (Christian) 6. WARN_ON(point != 0) for NORMAL type syncobj case. (Daniel Vetter) v3: 1. replace normal syncobj with timeline implemenation. (Vetter and Christian) a. normal syncobj signal op will create a signal PT to tail of signal pt list. b. normal syncobj wait op will create a wait pt with last signal point, and this wait PT is only signaled by related signal point PT. 2. many bug fix and clean up 3. stub fence moving is moved to other patch. v4： 1. fix RB tree loop with while(node=rb_first(...)). (Christian) 2. fix syncobj lifecycle. (Christian) 3. only enable_signaling when there is wait_pt. (Christian) 4. fix timeline path issues. 5. write a timeline test in libdrm v5: (Christian) 1. semaphore is called syncobj in kernel side. 2. don't need 'timeline' characters in some function name. 3. keep syncobj cb. v6: (Christian) 1. merge syncobj_timeline to syncobj structure. 2. simplify some check sentences. 3. some misc change. 4. fix CTS failed issue. v7: (Christian) 1. error handling when creating signal pt. 2. remove timeline naming in func. 3. export flags in find_fence. 4. allow reset timeline. v8: 1. use wait_event_interruptible without timeout 2. rename _TYPE_INDIVIDUAL to _TYPE_BINARY v9: 1. rename signal_pt->base to signal_pt->fence_array to avoid misleading 2. improve kerneldoc individual syncobj is tested by ./deqp-vk -n dEQP-VK*semaphore* timeline syncobj is tested by ./amdgpu_test -s 9 Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Cc: Christian Konig <christian.koenig@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Rakos <Daniel.Rakos@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Cc: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/257258/
2018-10-15drm/v3d: Add some better documentation of the in_sync arguments.Eric Anholt
Since this is UAPI, it's good to document what exactly the guarantees we're providing are. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180928232126.4332-3-eric@anholt.net Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-04Merge tag 'exynos-drm-next-for-v4.20' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Add out-bridge support - This patch series enables out-bridge for LVDS bridge device support, and also includes two cleanups and one relevant dt binding update for this. Add Samsung 16x16 tiled format support - This patch series adds Samsung 16x16 tiled format to scaler and gsc drivers. As for this, it adds Samsung specific format to drm_forcc.h header. For the git-pull request with relevant patches, I requested ack-by[1] to relevant maintainers but there was no any response. I'm pretty sure no problem to go to mainline though Exynos tree because the only user of it is Exynos. (airlied: this looked fine to me) [1] https://patchwork.freedesktop.org/patch/243921/ Add configurable plane alpha and pixel blend mode support - This patch series makes mixer driver to be configuragle for pixel blend mode and plane alpha, which also includes one fixup to set all default values correctly after reset. One cleanup - This patch replaces drm_atomic_helper_suspend/resume() with drm_mode_config_helper_suspend/resume() to remove exynos specific suspend_state. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1538380891-24040-1-git-send-email-inki.dae@samsung.com
2018-09-27drm/i915: Remove i915.enable_ppgtt overrideChris Wilson
Now that we are confident in providing full-ppgtt where supported, remove the ability to override the context isolation. v2: Remove faked aliasing-ppgtt for testing as it no longer is accepted. v3: s/USES/HAS/ to match usage and reject attempts to load the module on old GVT-g setups that do not provide support for full-ppgtt. v4: Insulate ABI ppGTT values from our internal enum (later plans involve moving ppGTT depth out of the enum, thus potentially breaking ABI unless we document the current values). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Zhi Wang <zhi.a.wang@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180926201222.5643-1-chris@chris-wilson.co.uk
2018-09-21Merge branch 'drm-next-4.20' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next This is a new pull for drm-next on top of last weeks with the following changes: - Fixed 64 bit divide - Fixed vram type on vega20 - Misc vega20 fixes - Misc DC fixes - Fix GDS/GWS/OA domain handling Previous changes from last week: amdgpu/kfd: - Picasso (new APU) support - Raven2 (new APU) support - Vega20 enablement - ACP powergating improvements - Add ABGR/XBGR display support - VCN JPEG engine support - Initial xGMI support - Use load balancing for engine scheduling - Lots of new documentation - Rework and clean up i2c and aux handling in DC - Add DP YCbCr 4:2:0 support in DC - Add DMCU firmware loading for Raven (used for ABM and PSR) - New debugfs features in DC - LVDS support in DC - Implement wave kill for gfx/compute (light weight reset for shaders) - Use AGP aperture to avoid gart mappings when possible - GPUVM performance improvements - Bulk moves for more efficient GPUVM LRU handling - Merge amdgpu and amdkfd into one module - Enable gfxoff and stutter mode on Raven - Misc cleanups Scheduler: - Load balancing support - Bug fixes ttm: - Bulk move functionality - Bug fixes radeon: - Misc cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920150438.12693-1-alexander.deucher@amd.com
2018-09-20drm: drm_fourcc: add Samsung 16x16 tile formatAndrzej Pietrasiewicz
Add modifier for tiled formats used by graphics modules found in Samsung Exynos5250/542x/5433 SoCs. This is a simple tiled layout using tiles of 16x16 pixels in a row-major layout. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-09-14drm/amdgpu: Add DMCU to firmware query interfaceDavid Francis
DMCU firmware version can be read using the AMDGPU_INFO ioctl or the amdgpu_firmware_info debugfs entry Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-14Merge tag 'drm-misc-next-2018-09-13' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.20: UAPI Changes: - Add host endian variants for the most common formats (Gerd) - Fail ADDFB2 for big-endian drivers that don't advertise BE quirk (Gerd) - clear smem_start in fbdev for drm drivers to avoid leaking fb addr (Daniel) Cross-subsystem Changes: Core Changes: - fix drm_mode_addfb() on big endian machines (Gerd) - add timeline point to syncobj find+replace (Chunming) - more drmP.h removal effort (Daniel) - split uapi portions of drm_atomic.c into drm_atomic_uapi.c (Daniel) Driver Changes: - bochs: Convert open-coded portions to use helpers (Peter) - vkms: Add cursor support (Haneen) - udmabuf: Lots of fixups (mostly cosmetic afaict) (Gerd) - qxl: Convert to use fbdev helper (Peter) Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Peter Wu <peter@lekensteyn.nl> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20180913130254.GA156437@art_vandelay
2018-09-11drm: Clarify DRM_MODE_REFLECT_X/Y documentationAlexandru Gheorghe
DRM_MODE_REFLECT_X and DRM_MODE_REFLECT_Y meaning seems a bit unclear to me, so try to clarify that with a bit of ascii graphics. Changes since v1: - Move the ascii graphics in the kerneldoc where all plane properties are already documented and make sure it's properly rendered, suggestested by Daniel Vetter. Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180910172946.18539-1-alexandru-cosmin.gheorghe@arm.com
2018-09-11Merge tag 'drm-intel-next-2018-09-06-2' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Merge tag 'gvt-next-2018-09-04' drm-intel-next-2018-09-06-1: UAPI Changes: - GGTT coherency GETPARAM: GGTT has turned out to be non-coherent for some platforms, which we've failed to communicate to userspace so far. SNA was modified to do extra flushing on non-coherent GGTT access, while Mesa will mitigate by always requiring WC mapping (which is non-coherent anyway). - Neuter Resource Streamer uAPI: There never really were users for the feature, so neuter it while keeping the interface bits for compatibility. This is a long due item from past. Cross-subsystem Changes: - Backmerge of branch drm-next-4.19 for DP_DPCD_REV_14 changes Core Changes: - None Driver Changes: - A load of Icelake (ICL) enabling patches (Paulo, Manasi) - Enabled full PPGTT for IVB,VLV and HSW (Chris) - Bugzilla #107113: Distribute DDB based on display resolutions (Mahesh) - Bugzillas #100023,#107476,#94921: Support limited range DP displays (Jani) - Bugzilla #107503: Increase LSPCON timeout (Fredrik) - Avoid boosting GPU due to an occasional stall in interactive workloads (Chris) - Apply GGTT coherency W/A only for affected systems instead of all (Chris) - Fix for infinite link training loop for faulty USB-C MST hubs (Nathan) - Keep KMS functional on Gen4 and earlier when GPU is wedged (Chris) - Stop holding ppGTT reference from closed VMAs (Chris) - Clear error registers after error capture (Lionel) - Various Icelake fixes (Anusha, Jyoti, Ville, Tvrtko) - Add missing Coffeelake (CFL) PCI IDs (Rodrigo) - Flush execlists tasklet directly from reset-finish (Chris) - Fix LPE audio runtime PM (Chris) - Fix detection of out of range surface positions (GLK/CNL) (Ville) - Remove wait-for-idle for PSR2 (Dhinakaran) - Power down existing display hardware resources when display is disabled (Chris) - Don't allow runtime power management if RC6 doesn't exist (Chris) - Add debugging checks for runtime power management paths (Imre) - Increase symmetry in display power init/fini paths (Imre) - Isolate GVT specific macros from i915_reg.h (Lucas) - Increase symmetry in power management enable/disable paths (Chris) - Increase IP disable timeout to 100 ms to avoid DRM_ERROR (Imre) - Fix memory leak from HDMI HDCP write function (Brian, Rodrigo) - Reject Y/Yf tiling on interlaced modes (Ville) - Use a cached mapping for the physical HWS on older gens (Chris) - Force slow path of writing relocations to buffer if unable to write to userspace (Chris) - Do a full device reset after being wedged (Chris) - Keep forcewake counts over reset (in case of debugfs user) (Imre, Chris) - Avoid false-positive errors from power wells during init (Imre) - Reset engines forcibly in exchange of declaring whole device wedged (Mika) - Reduce context HW ID lifetime in preparation for Icelake (Chris) - Attempt to recover from module load failures (Chris) - Keep select interrupts over a reset to avoid missing/losing them (Chris) - GuC submission backend improvements (Jakub) - Terminate context images with BB_END (Chris, Lionel) - Make GCC evaluate GGTT view struct size assertions again (Ville) - Add selftest to exercise suspend/hibernate code-paths for GEM (Chris) - Use a full emulation of a user ppgtt context in selftests (Chris) - Exercise resetting in the middle of a wait-on-fence in selftests (Chris) - Fix coherency issues on selftests for Baytrail (Chris) - Various other GEM fixes / self-test updates (Chris, Matt) - GuC doorbell self-tests (Daniele) - PSR mode control through debugfs for IGTs (Maarten) - Degrade expected WM latency errors to DRM_DEBUG_KMS (Chris) - Cope with errors better in MST link training (Dhinakaran) - Fix WARN on KBL external displays (Azhar) - Power well code cleanups (Imre) - Fixes to PSR debugging (Dhinakaran) - Make forcewake errors louder for easier catching in CI (WARNs) (Chris) - Fortify tiling code against programmer errors (Chris) - Bunch of fixes for CI exposed corner cases (multiple authors, mostly Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180907105446.GA22860@jlahtine-desk.ger.corp.intel.com
2018-09-06drm: Reject unknown legacy bpp and depth for drm_mode_addfb ioctlChris Wilson
Since this is handling user provided bpp and depth, we need to sanity check and propagate the EINVAL back rather than assume what the insane client intended and fill the logs with DRM_ERROR. v2: Check both bpp and depth match the builtin pixel format, and introduce a canonical DRM_FORMAT_INVALID to reserve 0 against any future fourcc. v3: Mark up DRM_FORMAT_C8 as being {bpp:8, depth:8} Testcase: igt/kms_addfb_basic/legacy-format Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180905153116.28924-1-chris@chris-wilson.co.uk
2018-08-27Merge drm/drm-next into drm-misc-nextSean Paul
Now that 4.19-rc1 is cut, backmerge it into -misc-next. Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-08-21drm/fourcc: Add DOC: overview commentBrian Starkey
There's a number of things which haven't previously been documented around the usage of format modifiers. Capture the current understanding in an overview comment and add it to the rst documentation. Ideally, the generated documentation would also include documentation of all of the #defines, but the kernel-doc system doesn't currently support kernel-doc comments on #define constants. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Brian Starkey <brian.starkey@arm.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180821161611.10424-1-brian.starkey@arm.com
2018-07-26drm: add msm compressed format modifiersJeykumar Sankaran
Qualcomm Snapdragon chipsets uses compressed format to optimize BW across multiple IP's. This change adds needed modifier support in drm for a simple 4x4 tile based compressed variants of base formats. Changes in v3: - Removed duplicate entry for DRM_FORMAT_MOD_QCOM_COMPRESSED (Rob Clark) Changes in v4: - Remove all modifiers aside from COMPRESSED, this includes tiled and 10-bit Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-23Merge drm/drm-next into drm-intel-next-queuedRodrigo Vivi
We need a backmerge to get DP_DPCD_REV_14 before we push other i915 changes to dinq that could break compilation. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-20drm/i915: Only force GGTT coherency w/a on required chipsetsChris Wilson
Not all chipsets have an internal buffer delaying the visibility of writes via the GGTT being visible by other physical paths, but we use a very heavy workaround for all. We only need to apply that workarounds to the chipsets we know suffer from the delay and the resulting coherency issue. Similarly, the same inconsistent coherency fouls up our ABI promise that a write into a mmap_gtt is immediately visible to others. Since the HW has made that a lie, let userspace know when that contract is broken. (Not that userspace would want to use mmap_gtt on those chipsets for other performance reasons...) Testcase: igt/drv_selftest/live_coherency Testcase: igt/gem_mmap_gtt/coherency Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100587 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180720101910.11153-1-chris@chris-wilson.co.uk
2018-07-20Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next More features for 4.19: - Map processes to vmids for debugging GPUVM faults - Raven gfxoff fixes - Initial gfxoff support for vega12 - Use defines for interrupt sources rather than magic numbers - DC aux fixes - Finish DC logging TODO - Add more DC debugfs interfaces for conformance testing - Add CRC support for DCN - Scheduler rework in preparation for load balancing - Unify common smu9 code - Clean up UVD instancing support - ttm cleanups - Misc fixes and cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180719194001.3488-1-alexander.deucher@amd.com
2018-07-20Merge tag 'drm-misc-next-2018-07-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.19: Core Changes: - add support for DisplayPort CEC-Tunneling-over-AUX (Hans Verkuil) - more doc updates (Daniel Vetter) - fourcc: Add is_yuv field to drm_format_info (Ayan Kumar Halder) - dma-buf: correctly place BUG_ON (Michel Dänzer) Driver Changes: - more vkms support(Rodrigo Siqueira) - many fixes and small improments to all drivers Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180718200826.GA20165@juma
2018-07-16drm/amdgpu: Allow to create BO lists in CS ioctl v3Andrey Grodzovsky
This change is to support MESA performace optimization. Modify CS IOCTL to allow its input as command buffer and an array of buffer handles to create a temporay bo list and then destroy it when IOCTL completes. This saves on calling for BO_LIST create and destry IOCTLs in MESA and by this improves performance. v2: Avoid inserting the temp list into idr struct. v3: Remove idr alloation from amdgpu_bo_list_create. Remove useless argument from amdgpu_cs_parser_fini Minor cosmetic stuff. v4: Revert amdgpu_bo_list_destroy back to static Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/arm/malidp: Add modifier definitions for describing Arm Framebuffer ↵Ayan Kumar Halder
Compression (AFBC). AFBC is a proprietary lossless image compression protocol and format. It provides fine-grained random access and minimizes the amount of data transferred between IP blocks. AFBC has several features which may be supported and/or used, which are represented using bits in the modifier. Not all combinations are valid, and different devices or use-cases may support different combinations. Changes from v2:- - Added ack by Maarten Lankhorst Signed-off-by: Rosen Zhelev <rosen.zhelev@arm.com> Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Brian Starkey <brian.starkey@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: James (Qian) Wang <james.qian.wang@arm.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://lkml.org/lkml/2018/7/10/360
2018-07-10Merge tag 'vmwgfx-next-4.19-3' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-next This introduces a header update and support for multisample surfaces. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/d020efb8-776d-5e8f-9d9f-122591e074d6@vmware.com
2018-07-10Merge tag 'vmwgfx-next-4.19-2' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-next A series of cleanups / reorganizations and modesetting changes that mostly target atomic state validation. [airlied: conflicts with SPDX stuff in amdgpu tree] Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1a88485e-e509-b00e-8485-19194f074115@vmware.com
2018-07-06drm/vmwgfx: Expose SM4_1 param to user spaceDeepak Rawat
A new param DRM_VMW_PARAM_SM4_1, is added for user space to determine availability of SM4.1. Minor version bump for SM4.1. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-07-06drm/vmwgfx: Add new ioctl for GB surface create and referenceDeepak Rawat
New ioctls DRM_VMW_GB_SURFACE_CREATE_EXT and DRM_VMW_GB_SURFACE_REF_EXT are added which support 64-bit wide svga device surface flags, quality level and multisample pattern. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Charmaine Lee <charmainel@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-07-06drm/vmwgfx: Add CAP2 support in vmwgfxNeha Bhende
The device exposes a new capability register. Add support for it. Signed-off-by: Neha Bhende <bhenden@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-07-03drm/vmwgfx: Replace vmw_dma_buffer with vmw_buffer_objectThomas Hellstrom
Initially vmware buffer objects were only used as DMA buffers, so the name DMA buffer was a natural one. However, currently they are used also as dumb buffers and MOBs backing guest backed objects so renaming them to buffer objects is logical. Particularly since there is a dmabuf subsystem in the kernel where a dma buffer means something completely different. This also renames user-space api structures and IOCTL names correspondingly, but the old names remain defined for now and the ABI hasn't changed. There are a couple of minor style changes to make checkpatch happy. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2018-06-29drm/v3d: Define the fourcc modifier for the Broadcom UIF format.Eric Anholt
This will be used by Mesa, and potentially other drivers in the future, to describe tiled buffers. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180621001703.13522-1-eric@anholt.net Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-06-22Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next First feature request for 4.19. Highlights: - Add initial amdgpu documentation - Add initial GPU scheduler documention - GPU scheduler fixes for dying processes - Add support for the JPEG engine on VCN - Switch CI to use powerplay by default - EDC support for CZ - More powerplay cleanups - Misc DC fixes Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621161138.3008-1-alexander.deucher@amd.com
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-04 11:57:13 +0000