| Age | Commit message (Collapse) | Author |
|---|
|
Merge misc updates from Andrew Morton:
"191 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (191 commits)
mm,hwpoison: make get_hwpoison_page() call get_any_page()
mm,hwpoison: send SIGBUS with error virutal address
mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
docs: remove description of DISCONTIGMEM
arch, mm: remove stale mentions of DISCONIGMEM
mm: remove CONFIG_DISCONTIGMEM
m68k: remove support for DISCONTIGMEM
arc: remove support for DISCONTIGMEM
arc: update comment about HIGHMEM implementation
alpha: remove DISCONTIGMEM and NUMA
mm/page_alloc: move free_the_page
mm/page_alloc: fix counting of managed_pages
mm/page_alloc: improve memmap_pages dbg msg
mm: drop SECTION_SHIFT in code comments
mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
mm/page_alloc: scale the number of pages that are batch freed
...
|
|
Some trace event formats print PFNs as hex while others print them as
decimal. This is rather annoying when attempting to grep through traces
to understand what's going on with a particular page.
$ git grep -ho 'pfn=[0x%lu]\+' include/trace/events/ | sort | uniq -c
11 pfn=0x%lx
12 pfn=%lu
2 pfn=%lx
Printing as hex is in the majority in the trace events, and all the normal
printks in mm/ also print PFNs as hex, so change all the PFN formats in
the trace events to use 0x%lx.
Link: https://lkml.kernel.org/r/20210602092608.1493-1-vincent.whitchurch@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"A normal mix of improvements, core changes and features that user have
been missing or complaining about.
User visible changes:
- new sysfs exports:
- add sysfs knob to limit scrub IO bandwidth per device
- device stats are also available in
/sys/fs/btrfs/FSID/devinfo/DEVID/error_stats
- support cancellable resize and device delete ioctls
- change how the empty value is interpreted when setting a property,
so far we have only 'btrfs.compression' and we need to distinguish
a reset to defaults and setting "do not compress", in general the
empty value will always mean 'reset to defaults' for any other
property, for compression it's either 'no' or 'none' to forbid
compression
Performance improvements:
- no need for full sync when truncation does not touch extents,
reported run time change is -12%
- avoid unnecessary logging of xattrs during fast fsyncs (+17%
throughput, -17% runtime on xattr stress workload)
Core:
- preemptive flushing improvements and fixes
- adjust clamping logic on multi-threaded workloads to avoid
flushing too soon
- take into account global block reserve, may help on almost full
filesystems
- continue flushing when there are enough pending delalloc and
ordered bytes
- simplify logic around conditional transaction commit, a workaround
used in the past for throttling that's been superseded by ticket
reservations that manage the throttling in a better way
- subpage blocksize preparation:
- submit read time repair only for each corrupted sector
- scrub repair now works with sectors and not pages
- free space cache (v1) works with sectors and not pages
- more fine grained bio tracking for extents
- subpage support in page callbacks, extent callbacks, end io
callbacks
- simplify transaction abort logic and always abort and don't check
various potentially unreliable stats tracked by the transaction
- exclusive operations can do more checks when started and allow eg.
cancellation of the same running operation
- ensure relocation never runs while we have send operations running,
e.g. when zoned background auto reclaim starts
Fixes:
- zoned: more sanity checks of write pointer
- improve error handling in delayed inodes
- send:
- fix invalid path for unlink operations after parent
orphanization
- fix crash when memory allocations trigger reclaim
- skip compression of we have only one page (can't make things
better)
- empty value of a property newly means reset to default
Other:
- lots of cleanups, comment updates, yearly typo fixing
- disable build on platforms having page size 256K"
* tag 'for-5.14-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (101 commits)
btrfs: remove unused btrfs_fs_info::total_pinned
btrfs: rip out btrfs_space_info::total_bytes_pinned
btrfs: rip the first_ticket_bytes logic from fail_all_tickets
btrfs: remove FLUSH_DELAYED_REFS from data ENOSPC flushing
btrfs: rip out may_commit_transaction
btrfs: send: fix crash when memory allocations trigger reclaim
btrfs: ensure relocation never runs while we have send operations running
btrfs: shorten integrity checker extent data mount option
btrfs: switch mount option bits to enums and use wider type
btrfs: props: change how empty value is interpreted
btrfs: compression: don't try to compress if we don't have enough pages
btrfs: fix unbalanced unlock in qgroup_account_snapshot()
btrfs: sysfs: export dev stats in devinfo directory
btrfs: fix typos in comments
btrfs: remove a stale comment for btrfs_decompress_bio()
btrfs: send: use list_move_tail instead of list_del/list_add_tail
btrfs: disable build on platforms having page size 256K
btrfs: send: fix invalid path for unlink operations after parent orphanization
btrfs: inline wait_current_trans_commit_start in its caller
btrfs: sink wait_for_unblock parameter to async commit
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's a reasonable amount here and the juicy details are all below.
It's worth noting that the MTE/KASAN changes strayed outside of our
usual directories due to core mm changes and some associated changes
to some other architectures; Andrew asked for us to carry these [1]
rather that take them via the -mm tree.
Summary:
- Optimise SVE switching for CPUs with 128-bit implementations.
- Fix output format from SVE selftest.
- Add support for versions v1.2 and 1.3 of the SMC calling
convention.
- Allow Pointer Authentication to be configured independently for
kernel and userspace.
- PMU driver cleanups for managing IRQ affinity and exposing event
attributes via sysfs.
- KASAN optimisations for both hardware tagging (MTE) and out-of-line
software tagging implementations.
- Relax frame record alignment requirements to facilitate 8-byte
alignment with KASAN and Clang.
- Cleanup of page-table definitions and removal of unused memory
types.
- Reduction of ARCH_DMA_MINALIGN back to 64 bytes.
- Refactoring of our instruction decoding routines and addition of
some missing encodings.
- Move entry code moved into C and hardened against harmful compiler
instrumentation.
- Update booting requirements for the FEAT_HCX feature, added to v8.7
of the architecture.
- Fix resume from idle when pNMI is being used.
- Additional CPU sanity checks for MTE and preparatory changes for
systems where not all of the CPUs support 32-bit EL0.
- Update our kernel string routines to the latest Cortex Strings
implementation.
- Big cleanup of our cache maintenance routines, which were
confusingly named and inconsistent in their implementations.
- Tweak linker flags so that GDB can understand vmlinux when using
RELR relocations.
- Boot path cleanups to enable early initialisation of per-cpu
operations needed by KCSAN.
- Non-critical fixes and miscellaneous cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (150 commits)
arm64: tlb: fix the TTL value of tlb_get_level
arm64: Restrict undef hook for cpufeature registers
arm64/mm: Rename ARM64_SWAPPER_USES_SECTION_MAPS
arm64: insn: avoid circular include dependency
arm64: smp: Bump debugging information print down to KERN_DEBUG
drivers/perf: fix the missed ida_simple_remove() in ddr_perf_probe()
perf/arm-cmn: Fix invalid pointer when access dtc object sharing the same IRQ number
arm64: suspend: Use cpuidle context helpers in cpu_suspend()
PSCI: Use cpuidle context helpers in psci_cpu_suspend_enter()
arm64: Convert cpu_do_idle() to using cpuidle context helpers
arm64: Add cpuidle context save/restore helpers
arm64: head: fix code comments in set_cpu_boot_mode_flag
arm64: mm: drop unused __pa(__idmap_text_start)
arm64: mm: fix the count comments in compute_indices
arm64/mm: Fix ttbr0 values stored in struct thread_info for software-pan
arm64: mm: Pass original fault address to handle_mm_fault()
arm64/mm: Drop SECTION_[SHIFT|SIZE|MASK]
arm64/mm: Use CONT_PMD_SHIFT for ARM64_MEMSTART_SHIFT
arm64/mm: Drop SWAPPER_INIT_MAP_SIZE
arm64: Conditionally configure PTR_AUTH key of the kernel.
...
|
|
may_commit_transaction was introduced before the ticketing
infrastructure existed. There was a problem where we'd legitimately be
out of space, but every reservation would trigger a transaction commit
and then fail. Thus if you had 1000 things trying to make a
reservation, they'd all do the flushing loop and thus commit the
transaction 1000 times before they'd get their ENOSPC.
This helper was introduced to short circuit this, if there wasn't space
that could be reclaimed by committing the transaction then simply ENOSPC
out. This made true ENOSPC tests much faster as we didn't waste a bunch
of time.
However many of our bugs over the years have been from cases where we
didn't account for some space that would be reclaimed by committing a
transaction. The delayed refs rsv space, delayed rsv, many pinned bytes
miscalculations, etc. And in the meantime the original problem has been
solved with ticketing. We no longer will commit the transaction 1000
times. Instead we'll get 1000 waiters, we will go through the flushing
mechanisms, and if there's no progress after 2 loops we ENOSPC everybody
out. The ticketing infrastructure gives us a deterministic way to see
if we're making progress or not, thus we avoid a lot of extra work.
So simplify this step by simply unconditionally committing the
transaction. This removes what is arguably our most common source of
early ENOSPC bugs and will allow us to drastically simplify many of the
things we track because we simply won't need them with this stuff gone.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a pretty bad abuse of btrfs_writepage_endio_finish_ordered() in
end_compressed_bio_write().
It passes compressed pages to btrfs_writepage_endio_finish_ordered(),
which is only supposed to accept inode pages.
Thankfully the important info here is the inode, so let's pass
btrfs_inode directly into btrfs_writepage_endio_finish_ordered(), and
make @page parameter optional.
By this, end_compressed_bio_write() can happily pass page=NULL while
still getting everything done properly.
Also, to cooperate with such modification, replace @page parameter for
trace_btrfs_writepage_end_io_hook() with btrfs_inode.
Although this removes page_index info, the existing start/len should be
enough for most usage.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Poisoning freed pages protects against kernel use-after-free. The
likelihood of such a bug involving kernel pages is significantly higher
than that for user pages. At the same time, poisoning freed pages can
impose a significant performance cost, which cannot always be justified
for user pages given the lower probability of finding a bug. Therefore,
disable freed user page poisoning when using HW tags. We identify
"user" pages via the flag set GFP_HIGHUSER_MOVABLE, which indicates
a strong likelihood of not being directly accessible to the kernel.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://linux-review.googlesource.com/id/I716846e2de8ef179f44e835770df7e6307be96c9
Link: https://lore.kernel.org/r/20210602235230.3928842-5-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
It is helpful to see what state of CS signal was during one
or another SPI operation. All the same for SPI setup.
Enable tracing of the SPI setup and CS selection.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20210526195655.75691-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- Add validation of the UDP retrans parameter to prevent shift
out-of-bounds
- Don't discard pNFS layout segments that are marked for return
Bugfixes:
- Fix a NULL dereference crash in xprt_complete_bc_request() when the
NFSv4.1 server misbehaves.
- Fix the handling of NFS READDIR cookie verifiers
- Sundry fixes to ensure attribute revalidation works correctly when
the server does not return post-op attributes.
- nfs4_bitmask_adjust() must not change the server global bitmasks
- Fix major timeout handling in the RPC code.
- NFSv4.2 fallocate() fixes.
- Fix the NFSv4.2 SEEK_HOLE/SEEK_DATA end-of-file handling
- Copy offload attribute revalidation fixes
- Fix an incorrect filehandle size check in the pNFS flexfiles driver
- Fix several RDMA transport setup/teardown races
- Fix several RDMA queue wrapping issues
- Fix a misplaced memory read barrier in sunrpc's call_decode()
Features:
- Micro optimisation of the TCP transmission queue using TCP_CORK
- statx() performance improvements by further splitting up the
tracking of invalid cached file metadata.
- Support the NFSv4.2 'change_attr_type' attribute and use it to
optimise handling of change attribute updates"
* tag 'nfs-for-5.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (85 commits)
xprtrdma: Fix a NULL dereference in frwr_unmap_sync()
sunrpc: Fix misplaced barrier in call_decode
NFSv4.2: Remove ifdef CONFIG_NFSD from NFSv4.2 client SSC code.
xprtrdma: Move fr_mr field to struct rpcrdma_mr
xprtrdma: Move the Work Request union to struct rpcrdma_mr
xprtrdma: Move fr_linv_done field to struct rpcrdma_mr
xprtrdma: Move cqe to struct rpcrdma_mr
xprtrdma: Move fr_cid to struct rpcrdma_mr
xprtrdma: Remove the RPC/RDMA QP event handler
xprtrdma: Don't display r_xprt memory addresses in tracepoints
xprtrdma: Add an rpcrdma_mr_completion_class
xprtrdma: Add tracepoints showing FastReg WRs and remote invalidation
xprtrdma: Avoid Send Queue wrapping
xprtrdma: Do not wake RPC consumer on a failed LocalInv
xprtrdma: Do not recycle MR after FastReg/LocalInv flushes
xprtrdma: Clarify use of barrier in frwr_wc_localinv_done()
xprtrdma: Rename frwr_release_mr()
xprtrdma: rpcrdma_mr_pop() already does list_del_init()
xprtrdma: Delete rpcrdma_recv_buffer_put()
xprtrdma: Fix cwnd update ordering
...
|
|
Merge more updates from Andrew Morton:
"The remainder of the main mm/ queue.
143 patches.
Subsystems affected by this patch series (all mm): pagecache, hugetlb,
userfaultfd, vmscan, compaction, migration, cma, ksm, vmstat, mmap,
kconfig, util, memory-hotplug, zswap, zsmalloc, highmem, cleanups, and
kfence"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (143 commits)
kfence: use power-efficient work queue to run delayed work
kfence: maximize allocation wait timeout duration
kfence: await for allocation using wait_event
kfence: zero guard page after out-of-bounds access
mm/process_vm_access.c: remove duplicate include
mm/mempool: minor coding style tweaks
mm/highmem.c: fix coding style issue
btrfs: use memzero_page() instead of open coded kmap pattern
iov_iter: lift memzero_page() to highmem.h
mm/zsmalloc: use BUG_ON instead of if condition followed by BUG.
mm/zswap.c: switch from strlcpy to strscpy
arm64/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
x86/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
mm,memory_hotplug: add kernel boot option to enable memmap_on_memory
acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supported
mm,memory_hotplug: allocate memmap from the added memory range
mm,memory_hotplug: factor out adjusting present pages into adjust_present_page_count()
mm,memory_hotplug: relax fully spanned sections check
drivers/base/memory: introduce memory_block_{online,offline}
mm/memory_hotplug: remove broken locking of zone PCP structures during hot remove
...
|
|
We should not pin pages in ZONE_MOVABLE. Currently, we do not pin only
movable CMA pages. Generalize the function that migrates CMA pages to
migrate all movable pages. Use is_pinnable_page() to check which pages
need to be migrated
Link: https://lkml.kernel.org/r/20210215161349.246722-10-pasha.tatashin@soleen.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
size_t in cma_alloc is confusing since it makes people think it's byte
count, not pages. Change it to unsigned long[1].
The unsigned int in cma_release is also not right so change it. Since we
have unsigned long in cma_release, free_contig_range should also respect
it.
[1] 67a2e213e7e9, mm: cma: fix incorrect type conversion for size during dma allocation
Link: https://lore.kernel.org/linux-mm/20210324043434.GP1719932@casper.infradead.org/
Link: https://lkml.kernel.org/r/20210331164018.710560-1-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There were missing places to add cma instance name. To identify each CMA
instance, let's add the name for every cma trace. This patch also changes
the existing cma_trace_alloc to cma_trace_finish since we have
cma_alloc_start[1].
[1] https://lore.kernel.org/linux-mm/20210324160740.15901-1-georgi.djakov@linaro.org
Link: https://lkml.kernel.org/r/20210330220237.748899-1-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add cma and migrate trace events to enable CMA allocation performance to
be measured via ftrace.
[georgi.djakov@linaro.org: add the CMA instance name to the cma_alloc_start trace event]
Link: https://lkml.kernel.org/r/20210326155414.25006-1-georgi.djakov@linaro.org
Link: https://lkml.kernel.org/r/20210324160740.15901-1-georgi.djakov@linaro.org
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "userfaultfd: add minor fault handling", v9.
Overview
========
This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS.
When enabled (via the UFFDIO_API ioctl), this feature means that any
hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also*
get events for "minor" faults. By "minor" fault, I mean the following
situation:
Let there exist two mappings (i.e., VMAs) to the same page(s) (shared
memory). One of the mappings is registered with userfaultfd (in minor
mode), and the other is not. Via the non-UFFD mapping, the underlying
pages have already been allocated & filled with some contents. The UFFD
mapping has not yet been faulted in; when it is touched for the first
time, this results in what I'm calling a "minor" fault. As a concrete
example, when working with hugetlbfs, we have huge_pte_none(), but
find_lock_page() finds an existing page.
We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea
is, userspace resolves the fault by either a) doing nothing if the
contents are already correct, or b) updating the underlying contents using
the second, non-UFFD mapping (via memcpy/memset or similar, or something
fancier like RDMA, or etc...). In either case, userspace issues
UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are
correct, carry on setting up the mapping".
Use Case
========
Consider the use case of VM live migration (e.g. under QEMU/KVM):
1. While a VM is still running, we copy the contents of its memory to a
target machine. The pages are populated on the target by writing to the
non-UFFD mapping, using the setup described above. The VM is still running
(and therefore its memory is likely changing), so this may be repeated
several times, until we decide the target is "up to date enough".
2. We pause the VM on the source, and start executing on the target machine.
During this gap, the VM's user(s) will *see* a pause, so it is desirable to
minimize this window.
3. Between the last time any page was copied from the source to the target, and
when the VM was paused, the contents of that page may have changed - and
therefore the copy we have on the target machine is out of date. Although we
can keep track of which pages are out of date, for VMs with large amounts of
memory, it is "slow" to transfer this information to the target machine. We
want to resume execution before such a transfer would complete.
4. So, the guest begins executing on the target machine. The first time it
touches its memory (via the UFFD-registered mapping), userspace wants to
intercept this fault. Userspace checks whether or not the page is up to date,
and if not, copies the updated page from the source machine, via the non-UFFD
mapping. Finally, whether a copy was performed or not, userspace issues a
UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents
are correct, carry on setting up the mapping".
We don't have to do all of the final updates on-demand. The userfaultfd manager
can, in the background, also copy over updated pages once it receives the map of
which pages are up-to-date or not.
Interaction with Existing APIs
==============================
Because this is a feature, a registered VMA could potentially receive both
missing and minor faults. I spent some time thinking through how the
existing API interacts with the new feature:
UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not
allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault:
- For non-shared memory or shmem, -EINVAL is returned.
- For hugetlb, -EFAULT is returned.
UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults.
Without modifications, the existing codepath assumes a new page needs to
be allocated. This is okay, since userspace must have a second
non-UFFD-registered mapping anyway, thus there isn't much reason to want
to use these in any case (just memcpy or memset or similar).
- If UFFDIO_COPY is used on a minor fault, -EEXIST is returned.
- If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL
in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case).
- UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns
-ENOENT in that case (regardless of the kind of fault).
Future Work
===========
This series only supports hugetlbfs. I have a second series in flight to
support shmem as well, extending the functionality. This series is more
mature than the shmem support at this point, and the functionality works
fully on hugetlbfs, so this series can be merged first and then shmem
support will follow.
This patch (of 6):
This feature allows userspace to intercept "minor" faults. By "minor"
faults, I mean the following situation:
Let there exist two mappings (i.e., VMAs) to the same page(s). One of the
mappings is registered with userfaultfd (in minor mode), and the other is
not. Via the non-UFFD mapping, the underlying pages have already been
allocated & filled with some contents. The UFFD mapping has not yet been
faulted in; when it is touched for the first time, this results in what
I'm calling a "minor" fault. As a concrete example, when working with
hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing
page.
This commit adds the new registration mode, and sets the relevant flag on
the VMAs being registered. In the hugetlb fault path, if we find that we
have huge_pte_none(), but find_lock_page() does indeed find an existing
page, then we have a "minor" fault, and if the VMA has the userfaultfd
registration flag, we call into userfaultfd to handle it.
This is implemented as a new registration mode, instead of an API feature.
This is because the alternative implementation has significant drawbacks
[1].
However, doing it this was requires we allocate a VM_* flag for the new
registration mode. On 32-bit systems, there are no unused bits, so this
feature is only supported on architectures with
CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in
MINOR mode on 32-bit architectures, we return -EINVAL.
[1] https://lore.kernel.org/patchwork/patch/1380226/
[peterx@redhat.com: fix minor fault page leak]
Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New feature:
- A new "func-no-repeats" option in tracefs/options directory.
When set the function tracer will detect if the current function
being traced is the same as the previous one, and instead of
recording it, it will keep track of the number of times that the
function is repeated in a row. And when another function is
recorded, it will write a new event that shows the function that
repeated, the number of times it repeated and the time stamp of
when the last repeated function occurred.
Enhancements:
- In order to implement the above "func-no-repeats" option, the ring
buffer timestamp can now give the accurate timestamp of the event
as it is being recorded, instead of having to record an absolute
timestamp for all events. This helps the histogram code which no
longer needs to waste ring buffer space.
- New validation logic to make sure all trace events that access
dereferenced pointers do so in a safe way, and will warn otherwise.
Fixes:
- No longer limit the PIDs of tasks that are recorded for
"saved_cmdlines" to PID_MAX_DEFAULT (32768), as systemd now allows
for a much larger range. This caused the mapping of PIDs to the
task names to be dropped for all tasks with a PID greater than
32768.
- Change trace_clock_global() to never block. This caused a deadlock.
Clean ups:
- Typos, prototype fixes, and removing of duplicate or unused code.
- Better management of ftrace_page allocations"
* tag 'trace-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (32 commits)
tracing: Restructure trace_clock_global() to never block
tracing: Map all PIDs to command lines
ftrace: Reuse the output of the function tracer for func_repeats
tracing: Add "func_no_repeats" option for function tracing
tracing: Unify the logic for function tracing options
tracing: Add method for recording "func_repeats" events
tracing: Add "last_func_repeats" to struct trace_array
tracing: Define new ftrace event "func_repeats"
tracing: Define static void trace_print_time()
ftrace: Simplify the calculation of page number for ftrace_page->records some more
ftrace: Store the order of pages allocated in ftrace_page
tracing: Remove unused argument from "ring_buffer_time_stamp()
tracing: Remove duplicate struct declaration in trace_events.h
tracing: Update create_system_filter() kernel-doc comment
tracing: A minor cleanup for create_system_filter()
kernel: trace: Mundane typo fixes in the file trace_events_filter.c
tracing: Fix various typos in comments
scripts/recordmcount.pl: Make vim and emacs indent the same
scripts/recordmcount.pl: Make indent spacing consistent
tracing: Add a verifier to check string pointers for trace events
...
|
|
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Big cleanup of almost unsused parts of the IOMMU API by Christoph
Hellwig. This mostly affects the Freescale PAMU driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- Drop vestigial PREFETCH_ADDR support (SMMUv3)
- Elide TLB sync logic for empty gather (SMMUv3)
- Fix "Service Failure Mode" handling (SMMUv3)
- New Qualcomm compatible string (SMMUv2)
- Removal of the AMD IOMMU performance counter writeable check on AMD.
It caused long boot delays on some machines and is only needed to
work around an errata on some older (possibly pre-production) chips.
If someone is still hit by this hardware issue anyway the performance
counters will just return 0.
- Support for targeted invalidations in the AMD IOMMU driver. Before
that the driver only invalidated a single 4k page or the whole IO/TLB
for an address space. This has been extended now and is mostly useful
for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the Intel VT-d
driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost when
converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and support
iommu_ops to be const again when drivers are built as modules.
* tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (84 commits)
iommu: Streamline registration interface
iommu: Statically set module owner
iommu/mediatek-v1: Add error handle for mtk_iommu_probe
iommu/mediatek-v1: Avoid build fail when build as module
iommu/mediatek: Always enable the clk on resume
iommu/fsl-pamu: Fix uninitialized variable warning
iommu/vt-d: Force to flush iotlb before creating superpage
iommu/amd: Put newline after closing bracket in warning
iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()'
iommu/vt-d: Fix build error of pasid_enable_wpe() with !X86
iommu/amd: Remove performance counter pre-initialization test
Revert "iommu/amd: Fix performance counter initialization"
iommu/amd: Remove duplicate check of devid
iommu/exynos: Remove unneeded local variable initialization
iommu/amd: Page-specific invalidations for more than one page
iommu/arm-smmu-v3: Remove the unused fields for PREFETCH_CONFIG command
iommu/vt-d: Avoid unnecessary cache flush in pasid entry teardown
iommu/vt-d: Invalidate PASID cache when root/context entry changed
iommu/vt-d: Remove WO permissions on second-level paging entries
iommu/vt-d: Report the right page fault address
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"New features for ext4 this cycle include support for encrypted
casefold, ensure that deleted file names are cleared in directory
blocks by zeroing directory entries when they are unlinked or moved as
part of a hash tree node split. We also improve the block allocator's
performance on a freshly mounted file system by prefetching block
bitmaps.
There are also the usual cleanups and bug fixes, including fixing a
page cache invalidation race when there is mixed buffered and direct
I/O and the block size is less than page size, and allow the dax flag
to be set and cleared on inline directories"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (32 commits)
ext4: wipe ext4_dir_entry2 upon file deletion
ext4: Fix occasional generic/418 failure
fs: fix reporting supported extra file attributes for statx()
ext4: allow the dax flag to be set and cleared on inline directories
ext4: fix debug format string warning
ext4: fix trailing whitespace
ext4: fix various seppling typos
ext4: fix error return code in ext4_fc_perform_commit()
ext4: annotate data race in jbd2_journal_dirty_metadata()
ext4: annotate data race in start_this_handle()
ext4: fix ext4_error_err save negative errno into superblock
ext4: fix error code in ext4_commit_super
ext4: always panic when errors=panic is specified
ext4: delete redundant uptodate check for buffer
ext4: do not set SB_ACTIVE in ext4_orphan_cleanup()
ext4: make prefetch_block_bitmaps default
ext4: add proc files to monitor new structures
ext4: improve cr 0 / cr 1 group scanning
ext4: add MB_NUM_ORDERS macro
ext4: add mballoc stats proc file
...
|
|
Adjust the rss_stat tracepoint to print the name of the resident page type
that got updated (e.g. MM_ANONPAGES/MM_FILEPAGES), rather than the numeric
index corresponding to it (the __entry->member value):
Before this patch:
------------------
rss_stat: mm_id=1216113068 curr=0 member=1 size=28672B
rss_stat: mm_id=1216113068 curr=0 member=1 size=0B
rss_stat: mm_id=534402304 curr=1 member=0 size=188416B
rss_stat: mm_id=534402304 curr=1 member=1 size=40960B
After this patch:
-----------------
rss_stat: mm_id=1726253524 curr=1 type=MM_ANONPAGES size=40960B
rss_stat: mm_id=1726253524 curr=1 type=MM_FILEPAGES size=663552B
rss_stat: mm_id=1726253524 curr=1 type=MM_ANONPAGES size=65536B
rss_stat: mm_id=1726253524 curr=1 type=MM_FILEPAGES size=647168B
Use TRACE_DEFINE_ENUM()/__print_symbolic() logic to map the enum values to
the strings they represent, so that userspace tools can also parse the raw
data correctly.
Link: https://lkml.kernel.org/r/20210310162305.4862-1-ovidiu.panait@windriver.com
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 tlb updates from Ingo Molnar:
"The x86 MM changes in this cycle were:
- Implement concurrent TLB flushes, which overlaps the local TLB
flush with the remote TLB flush.
In testing this improved sysbench performance measurably by a
couple of percentage points, especially if TLB-heavy security
mitigations are active.
- Further micro-optimizations to improve the performance of TLB
flushes"
* tag 'x86-mm-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Micro-optimize smp_call_function_many_cond()
smp: Inline on_each_cpu_cond() and on_each_cpu()
x86/mm/tlb: Remove unnecessary uses of the inline keyword
cpumask: Mark functions as pure
x86/mm/tlb: Do not make is_lazy dirty for no reason
x86/mm/tlb: Privatize cpu_tlbstate
x86/mm/tlb: Flush remote and local TLBs concurrently
x86/mm/tlb: Open-code on_each_cpu_cond_mask() for tlb_is_not_lazy()
x86/mm/tlb: Unify flush_tlb_func_local() and flush_tlb_func_remote()
smp: Run functions concurrently in smp_call_function_many_cond()
|
|
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, target, tcmu,
smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx).
The major core change is using a sbitmap instead of an atomic for
queue tracking"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits)
scsi: target: tcm_fc: Fix a kernel-doc header
scsi: target: Shorten ALUA error messages
scsi: target: Fix two format specifiers
scsi: target: Compare explicitly with SAM_STAT_GOOD
scsi: sd: Introduce a new local variable in sd_check_events()
scsi: dc395x: Open-code status_byte(u8) calls
scsi: 53c700: Open-code status_byte(u8) calls
scsi: smartpqi: Remove unused functions
scsi: qla4xxx: Remove an unused function
scsi: myrs: Remove unused functions
scsi: myrb: Remove unused functions
scsi: mpt3sas: Fix two kernel-doc headers
scsi: fcoe: Suppress a compiler warning
scsi: libfc: Fix a format specifier
scsi: aacraid: Remove an unused function
scsi: core: Introduce enum scsi_disposition
scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case
scsi: core: Rename scsi_softirq_done() into scsi_complete()
scsi: core: Remove an incorrect comment
scsi: core: Make the scsi_alloc_sgtables() documentation more accurate
...
|
|
Pull io_uring updates from Jens Axboe:
- Support for multi-shot mode for POLL requests
- More efficient reference counting. This is shamelessly stolen from
the mm side. Even though referencing is mostly single/dual user, the
128 count was retained to keep the code the same. Maybe this
should/could be made generic at some point.
- Removal of the need to have a manager thread for each ring. The
manager threads only job was checking and creating new io-threads as
needed, instead we handle this from the queue path.
- Allow SQPOLL without CAP_SYS_ADMIN or CAP_SYS_NICE. Since 5.12, this
thread is "just" a regular application thread, so no need to restrict
use of it anymore.
- Cleanup of how internal async poll data lifetime is managed.
- Fix for syzbot reported crash on SQPOLL cancelation.
- Make buffer registration more like file registrations, which includes
flexibility in avoiding full set unregistration and re-registration.
- Fix for io-wq affinity setting.
- Be a bit more defensive in task->pf_io_worker setup.
- Various SQPOLL fixes.
- Cleanup of SQPOLL creds handling.
- Improvements to in-flight request tracking.
- File registration cleanups.
- Tons of cleanups and little fixes
* tag 'for-5.13/io_uring-2021-04-27' of git://git.kernel.dk/linux-block: (156 commits)
io_uring: maintain drain logic for multishot poll requests
io_uring: Check current->io_uring in io_uring_cancel_sqpoll
io_uring: fix NULL reg-buffer
io_uring: simplify SQPOLL cancellations
io_uring: fix work_exit sqpoll cancellations
io_uring: Fix uninitialized variable up.resv
io_uring: fix invalid error check after malloc
io_uring: io_sq_thread() no longer needs to reset current->pf_io_worker
kernel: always initialize task->pf_io_worker to NULL
io_uring: update sq_thread_idle after ctx deleted
io_uring: add full-fledged dynamic buffers support
io_uring: implement fixed buffers registration similar to fixed files
io_uring: prepare fixed rw for dynanic buffers
io_uring: keep table of pointers to ubufs
io_uring: add generic rsrc update with tags
io_uring: add IORING_REGISTER_RSRC
io_uring: enumerate dynamic resources
io_uring: add generic path for rsrc update
io_uring: preparation for rsrc tagging
io_uring: decouple CQE filling from requests
...
|
|
Pull block updates from Jens Axboe:
"Pretty quiet round this time, which is nice. In detail:
- Series revamping bounce buffer support (Christoph)
- Dead code removal (Christoph, Bart)
- Partition iteration revamp, now using xarray (Christoph)
- Passthrough request scheduler improvements (Lin)
- Series of BFQ improvements (Paolo)
- Fix ioprio task iteration (Peter)
- Various little tweaks and fixes (Tejun, Saravanan, Bhaskar, Max,
Nikolay)"
* tag 'for-5.13/block-2021-04-27' of git://git.kernel.dk/linux-block: (41 commits)
blk-iocost: don't ignore vrate_min on QD contention
blk-mq: Fix spurious debugfs directory creation during initialization
bfq/mq-deadline: remove redundant check for passthrough request
blk-mq: bypass IO scheduler's limit_depth for passthrough request
block: Remove an obsolete comment from sg_io()
block: move bio_list_copy_data to pktcdvd
block: remove zero_fill_bio_iter
block: add queue_to_disk() to get gendisk from request_queue
block: remove an incorrect check from blk_rq_append_bio
block: initialize ret in bdev_disk_changed
block: Fix sys_ioprio_set(.which=IOPRIO_WHO_PGRP) task iteration
block: remove disk_part_iter
block: simplify diskstats_show
block: simplify show_partition
block: simplify printk_all_partitions
block: simplify partition_overlaps
block: simplify partition removal
block: take bd_mutex around delete_partitions in del_gendisk
block: refactor blk_drop_partitions
block: move more syncing and invalidation to delete_partition
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
- Support for "N" as alias for last bit in bitmap parsing library (eg
using syntax like "nohz_full=2-N")
- kvfree_rcu updates
- mm_dump_obj() updates. (One of these is to mm, but was suggested by
Andrew Morton.)
- RCU callback offloading update
- Polling RCU grace-period interfaces
- Realtime-related RCU updates
- Tasks-RCU updates
- Torture-test updates
- Torture-test scripting updates
- Miscellaneous fixes
* tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
rcutorture: Test start_poll_synchronize_rcu() and poll_state_synchronize_rcu()
rcu: Provide polling interfaces for Tiny RCU grace periods
torture: Fix kvm.sh --datestamp regex check
torture: Consolidate qemu-cmd duration editing into kvm-transform.sh
torture: Print proper vmlinux path for kvm-again.sh runs
torture: Make TORTURE_TRUST_MAKE available in kvm-again.sh environment
torture: Make kvm-transform.sh update jitter commands
torture: Add --duration argument to kvm-again.sh
torture: Add kvm-again.sh to rerun a previous torture-test
torture: Create a "batches" file for build reuse
torture: De-capitalize TORTURE_SUITE
torture: Make upper-case-only no-dot no-slash scenario names official
torture: Rename SRCU-t and SRCU-u to avoid lowercase characters
torture: Remove no-mpstat error message
torture: Record kvm-test-1-run.sh and kvm-test-1-run-qemu.sh PIDs
torture: Record jitter start/stop commands
torture: Extract kvm-test-1-run-qemu.sh from kvm-test-1-run.sh
torture: Record TORTURE_KCONFIG_GDB_ARG in qemu-cmd
torture: Abstract jitter.sh start/stop into scripts
rcu: Provide polling interfaces for Tree RCU grace periods
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS updates from David Howells:
"Use the new netfs lib.
Begin the process of overhauling the use of the fscache API by AFS and
the introduction of support for features such as Transparent Huge
Pages (THPs).
- Add some support for THPs, including using core VM helper functions
to find details of pages.
- Use the ITER_XARRAY I/O iterator to mediate access to the pagecache
as this handles THPs and doesn't require allocation of large bvec
arrays.
- Delegate address_space read/pre-write I/O methods for AFS to the
netfs helper library. A method is provided to the library that
allows it to issue a read against the server.
This includes a change in use for PG_fscache (it now indicates a
DIO write in progress from the marked page), so a number of waits
need to be deployed for it.
- Split the core AFS writeback function to make it easier to modify
in future patches to handle writing to the cache. [This might
feasibly make more sense moved out into my fscache-iter branch].
I've tested these with "xfstests -g quick" against an AFS volume
(xfstests needs patching to make it work). With this, AFS without a
cache passes all expected xfstests; with a cache, there's an extra
failure, but that's also there before these patches. Fixing that
probably requires a greater overhaul (as can be found on my
fscache-iter branch, but that's for a later time).
Thanks should go to Marc Dionne and Jeff Altman of AuriStor for
exercising the patches in their test farm also"
Link: https://lore.kernel.org/lkml/3785063.1619482429@warthog.procyon.org.uk/
* tag 'afs-netfs-lib-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Use the netfs_write_begin() helper
afs: Use new netfs lib read helper API
afs: Use the fs operation ops to handle FetchData completion
afs: Prepare for use of THPs
afs: Extract writeback extension into its own function
afs: Wait on PG_fscache before modifying/releasing a page
afs: Use ITER_XARRAY for writing
afs: Set up the iov_iter before calling afs_extract_data()
afs: Log remote unmarshalling errors
afs: Don't truncate iter during data fetch
afs: Move key to afs_read struct
afs: Print the operation debug_id when logging an unexpected data version
afs: Pass page into dirty region helpers to provide THP size
afs: Disable use of the fscache I/O routines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull network filesystem helper library updates from David Howells:
"Here's a set of patches for 5.13 to begin the process of overhauling
the local caching API for network filesystems. This set consists of
two parts:
(1) Add a helper library to handle the new VM readahead interface.
This is intended to be used unconditionally by the filesystem
(whether or not caching is enabled) and provides a common
framework for doing caching, transparent huge pages and, in the
future, possibly fscrypt and read bandwidth maximisation. It also
allows the netfs and the cache to align, expand and slice up a
read request from the VM in various ways; the netfs need only
provide a function to read a stretch of data to the pagecache and
the helper takes care of the rest.
(2) Add an alternative fscache/cachfiles I/O API that uses the kiocb
facility to do async DIO to transfer data to/from the netfs's
pages, rather than using readpage with wait queue snooping on one
side and vfs_write() on the other. It also uses less memory, since
it doesn't do buffered I/O on the backing file.
Note that this uses SEEK_HOLE/SEEK_DATA to locate the data
available to be read from the cache. Whilst this is an improvement
from the bmap interface, it still has a problem with regard to a
modern extent-based filesystem inserting or removing bridging
blocks of zeros. Fixing that requires a much greater overhaul.
This is a step towards overhauling the fscache API. The change is
opt-in on the part of the network filesystem. A netfs should not try
to mix the old and the new API because of conflicting ways of handling
pages and the PG_fscache page flag and because it would be mixing DIO
with buffered I/O. Further, the helper library can't be used with the
old API.
This does not change any of the fscache cookie handling APIs or the
way invalidation is done at this time.
In the near term, I intend to deprecate and remove the old I/O API
(fscache_allocate_page{,s}(), fscache_read_or_alloc_page{,s}(),
fscache_write_page() and fscache_uncache_page()) and eventually
replace most of fscache/cachefiles with something simpler and easier
to follow.
This patchset contains the following parts:
- Some helper patches, including provision of an ITER_XARRAY iov
iterator and a function to do readahead expansion.
- Patches to add the netfs helper library.
- A patch to add the fscache/cachefiles kiocb API.
- A pair of patches to fix some review issues in the ITER_XARRAY and
read helpers as spotted by Al and Willy.
Jeff Layton has patches to add support in Ceph for this that he
intends for this merge window. I have a set of patches to support AFS
that I will post a separate pull request for.
With this, AFS without a cache passes all expected xfstests; with a
cache, there's an extra failure, but that's also there before these
patches. Fixing that probably requires a greater overhaul. Ceph also
passes the expected tests.
I also have patches in a separate branch to tidy up the handling of
PG_fscache/PG_private_2 and their contribution to page refcounting in
the core kernel here, but I haven't included them in this set and will
route them separately"
Link: https://lore.kernel.org/lkml/3779937.1619478404@warthog.procyon.org.uk/
* tag 'netfs-lib-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: Miscellaneous fixes
iov_iter: Four fixes for ITER_XARRAY
fscache, cachefiles: Add alternate API to use kiocb for read/write to cache
netfs: Add a tracepoint to log failures that would be otherwise unseen
netfs: Define an interface to talk to a cache
netfs: Add write_begin helper
netfs: Gather stats
netfs: Add tracepoints
netfs: Provide readahead and readpage netfs helpers
netfs, mm: Add set/end/wait_on_page_fscache() aliases
netfs, mm: Move PG_fscache helper funcs to linux/netfs.h
netfs: Documentation for helper library
netfs: Make a netfs helper module
mm: Implement readahead_control pageset expansion
mm/readahead: Handle ractl nr_pages being modified
fs: Document file_ra_state
mm/filemap: Pass the file_ra_state in the ractl
mm: Add set/end/wait functions for PG_private_2
iov_iter: Add ITER_XARRAY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"The updates this time are mostly stabilization, preparation and minor
improvements.
User visible improvements:
- readahead for send, improving run time of full send by 10% and for
incremental by 25%
- make reflinks respect O_SYNC, O_DSYNC and S_SYNC flags
- export supported sectorsize values in sysfs (currently only page
size, more once full subpage support lands)
- more graceful errors and warnings on 32bit systems when logical
addresses for metadata reach the limit posed by unsigned long in
page::index
- error: fail mount if there's a metadata block beyond the limit
- error: new metadata block would be at unreachable address
- warn when 5/8th of the limit is reached, for 4K page systems
it's 10T, for 64K page it's 160T
- zoned mode
- relocated zones get reset at the end instead of discard
- automatic background reclaim of zones that have 75%+ of unusable
space, the threshold is tunable in sysfs
Fixes:
- fsync and tree mod log fixes
- fix inefficient preemptive reclaim calculations
- fix exhaustion of the system chunk array due to concurrent
allocations
- fix fallback to no compression when racing with remount
- preemptive fix for dm-crypt on zoned device that does not properly
advertise zoned support
Core changes:
- add inode lock to synchronize mmap and other block updates (eg.
deduplication, fallocate, fsync)
- kmap conversions to new kmap_local API
- subpage support (continued)
- new helpers for page state/extent buffer tracking
- metadata changes now support read and write
- error handling through out relocation call paths
- many other cleanups and code simplifications"
* tag 'for-5.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (112 commits)
btrfs: zoned: automatically reclaim zones
btrfs: rename delete_unused_bgs_mutex to reclaim_bgs_lock
btrfs: zoned: reset zones of relocated block groups
btrfs: more graceful errors/warnings on 32bit systems when reaching limits
btrfs: zoned: fix unpaired block group unfreeze during device replace
btrfs: fix race when picking most recent mod log operation for an old root
btrfs: fix metadata extent leak after failure to create subvolume
btrfs: handle remount to no compress during compression
btrfs: zoned: fail mount if the device does not support zone append
btrfs: fix race between transaction aborts and fsyncs leading to use-after-free
btrfs: introduce submit_eb_subpage() to submit a subpage metadata page
btrfs: make lock_extent_buffer_for_io() to be subpage compatible
btrfs: introduce write_one_subpage_eb() function
btrfs: introduce end_bio_subpage_eb_writepage() function
btrfs: check return value of btrfs_commit_transaction in relocation
btrfs: do proper error handling in merge_reloc_roots
btrfs: handle extent corruption with select_one_root properly
btrfs: cleanup error handling in prepare_to_merge
btrfs: do not panic in __add_reloc_root
btrfs: handle __add_reloc_root failures in btrfs_recover_relocation
...
|
|
Pull nfsd updates from Chuck Lever:
"Highlights:
- Update NFSv2 and NFSv3 XDR encoding functions
- Add batch Receive posting to the server's RPC/RDMA transport (take 2)
- Reduce page allocator traffic in svcrdma"
* tag 'nfsd-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (70 commits)
NFSD: Use DEFINE_SPINLOCK() for spinlock
sunrpc: Remove unused function ip_map_lookup
NFSv4.2: fix copy stateid copying for the async copy
UAPI: nfsfh.h: Replace one-element array with flexible-array member
svcrdma: Clean up dto_q critical section in svc_rdma_recvfrom()
svcrdma: Remove svc_rdma_recv_ctxt::rc_pages and ::rc_arg
svcrdma: Remove sc_read_complete_q
svcrdma: Single-stage RDMA Read
SUNRPC: Move svc_xprt_received() call sites
SUNRPC: Export svc_xprt_received()
svcrdma: Retain the page backing rq_res.head[0].iov_base
svcrdma: Remove unused sc_pages field
svcrdma: Normalize Send page handling
svcrdma: Add a "deferred close" helper
svcrdma: Maintain a Receive water mark
svcrdma: Use svc_rdma_refresh_recvs() in wc_receive
svcrdma: Add a batch Receive posting mechanism
svcrdma: Remove stale comment for svc_rdma_wc_receive()
svcrdma: Provide an explanatory comment in CMA event handler
svcrdma: RPCDBG_FACILITY is no longer used
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- crypto_destroy_tfm now ignores errors as well as NULL pointers
Algorithms:
- Add explicit curve IDs in ECDH algorithm names
- Add NIST P384 curve parameters
- Add ECDSA
Drivers:
- Add support for Green Sardine in ccp
- Add ecdh/curve25519 to hisilicon/hpre
- Add support for AM64 in sa2ul"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
fsverity: relax build time dependency on CRYPTO_SHA256
fscrypt: relax Kconfig dependencies for crypto API algorithms
crypto: camellia - drop duplicate "depends on CRYPTO"
crypto: s5p-sss - consistently use local 'dev' variable in probe()
crypto: s5p-sss - remove unneeded local variable initialization
crypto: s5p-sss - simplify getting of_device_id match data
ccp: ccp - add support for Green Sardine
crypto: ccp - Make ccp_dev_suspend and ccp_dev_resume void functions
crypto: octeontx2 - add support for OcteonTX2 98xx CPT block.
crypto: chelsio/chcr - Remove useless MODULE_VERSION
crypto: ux500/cryp - Remove duplicate argument
crypto: chelsio - remove unused function
crypto: sa2ul - Add support for AM64
crypto: sa2ul - Support for per channel coherency
dt-bindings: crypto: ti,sa2ul: Add new compatible for AM64
crypto: hisilicon - enable new error types for QM
crypto: hisilicon - add new error type for SEC
crypto: hisilicon - support new error types for ZIP
crypto: hisilicon - dynamic configuration 'err_info'
crypto: doc - fix kernel-doc notation in chacha.c and af_alg.c
...
|
|
Clean up: The last remaining field in struct rpcrdma_frwr has been
removed, so the struct can be eliminated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Clean up: The handler only recorded a trace event. If indeed no
action is needed by the RPC/RDMA consumer, then the event can be
ignored.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The remote peer's IP address is sufficient, and does not expose
details of the kernel's memory layout.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
I found it confusing that the MR_EVENT class displays the mr.id but
the associated COMPLETION_EVENT class displays a cid (that happens
to contain the mr.id!). To make it a little easier on humans who
have to read and interpret these events, create an MR_COMPLETION
class that displays the mr.id in the same way as the MR_EVENT class.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The Send signaling logic is a little subtle, so add some
observability around it. For every xprtrdma_mr_fastreg event, there
should be an xprtrdma_mr_localinv or xprtrdma_mr_reminv event.
When these tracepoints are enabled, we can see exactly when an MR is
DMA-mapped, registered, invalidated (either locally or remotely) and
then DMA-unmapped.
kworker/u25:2-190 [000] 787.979512: xprtrdma_mr_map: task:351@5 mr.id=4 nents=2 5608@0x8679e0c8f6f56000:0x00000503 (TO_DEVICE)
kworker/u25:2-190 [000] 787.979515: xprtrdma_chunk_read: task:351@5 pos=148 5608@0x8679e0c8f6f56000:0x00000503 (last)
kworker/u25:2-190 [000] 787.979519: xprtrdma_marshal: task:351@5 xid=0x8679e0c8: hdr=52 xdr=148/5608/0 read list/inline
kworker/u25:2-190 [000] 787.979525: xprtrdma_mr_fastreg: task:351@5 mr.id=4 nents=2 5608@0x8679e0c8f6f56000:0x00000503 (TO_DEVICE)
kworker/u25:2-190 [000] 787.979526: xprtrdma_post_send: task:351@5 cq.id=0 cid=73 (2 SGEs)
...
kworker/5:1H-219 [005] 787.980567: xprtrdma_wc_receive: cq.id=1 cid=161 status=SUCCESS (0/0x0) received=164
kworker/5:1H-219 [005] 787.980571: xprtrdma_post_recvs: peer=[192.168.100.55]:20049 r_xprt=0xffff8884974d4000: 0 new recvs, 70 active (rc 0)
kworker/5:1H-219 [005] 787.980573: xprtrdma_reply: task:351@5 xid=0x8679e0c8 credits=64
kworker/5:1H-219 [005] 787.980576: xprtrdma_mr_reminv: task:351@5 mr.id=4 nents=2 5608@0x8679e0c8f6f56000:0x00000503 (TO_DEVICE)
kworker/5:1H-219 [005] 787.980577: xprtrdma_mr_unmap: mr.id=4 nents=2 5608@0x8679e0c8f6f56000:0x00000503 (TO_DEVICE)
Note that I've moved the xprtrdma_post_send tracepoint so that event
always appears after the xprtrdma_mr_fastreg tracepoint. Otherwise
the event log looks counterintuitive (FastReg is always supposed to
happen before Send).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Better not to touch MRs involved in a flush or post error until the
Send and Receive Queues are drained and the transport is fully
quiescent. Simply don't insert such MRs back onto the free list.
They remain on mr_all and will be released when the connection is
torn down.
I had thought that recycling would prevent hardware resources from
being tied up for a long time. However, since v5.7, a transport
disconnect destroys the QP and other hardware-owned resources. The
MRs get cleaned up nicely at that point.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Use a single ITER_XARRAY iterator to describe the portion of a file to be
transmitted to the server rather than generating a series of small
ITER_BVEC iterators on the fly. This will make it easier to implement AIO
in afs.
In theory we could maybe use one giant ITER_BVEC, but that means
potentially allocating a huge array of bio_vec structs (max 256 per page)
when in fact the pagecache already has a structure listing all the relevant
pages (radix_tree/xarray) that can be walked over.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/153685395197.14766.16289516750731233933.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/158861251312.340223.17924900795425422532.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465828607.1377938.6903132788463419368.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588535018.3465195.14509994354240338307.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118152415.1232039.6452879415814850025.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161048194.2537118.13763612220937637316.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340411602.1303470.4661108879482218408.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539555629.286939.5241869986617154517.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653811456.2770958.7017388543246759245.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789095005.6155.6789055030327407928.stgit@warthog.procyon.org.uk/ # v6
|
|
Pass a pointer to the page being accessed into the dirty region helpers so
that the size of the page can be determined in case it's a transparent huge
page.
This also required the page to be passed into the afs_page_dirty trace
point - so there's no need to specifically pass in the index or private
data as these can be retrieved directly from the page struct.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/160588527183.3465195.16107942526481976308.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118144921.1232039.11377711180492625929.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161040747.2537118.11435394902674511430.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340404553.1303470.11414163641767769882.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539548385.286939.8864598314493255313.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653804285.2770958.3497360004849598038.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789087043.6155.16922142208140170528.stgit@warthog.procyon.org.uk/ # v6
|
|
Add a tracepoint to log internal failures (such as cache errors) that we
don't otherwise want to pass back to the netfs.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/161781048813.463527.1557000804674707986.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/161789082749.6155.15498680577213140870.stgit@warthog.procyon.org.uk/ # v6
|
|
Add an interface to the netfs helper library for reading data from the
cache instead of downloading it from the server and support for writing
data just downloaded or cleared to the cache.
The API passes an iov_iter to the cache read/write routines to indicate the
data/buffer to be used. This is done using the ITER_XARRAY type to provide
direct access to the netfs inode's pagecache.
When the netfs's ->begin_cache_operation() method is called, this must fill
in the cache_resources in the netfs_read_request struct, including the
netfs_cache_ops used by the helper lib to talk to the cache. The helper
lib does not directly access the cache.
Changes:
v6:
- Call trace_netfs_read() after beginning the cache op so that the cookie
debug ID can be logged[3].
- Don't record the error from writing to the cache. We don't want to pass
it back to the netfs[4].
- Fix copy-to-cache subreq amalgamation to not round up as it goes along
otherwise it overcalculates the length of the write[5].
v5:
- Use end_page_fscache() rather than unlock_page_fscache()[2].
v4:
- Added flag to netfs_subreq_terminated() to indicate that the caller may
have been running async and stuff that might sleep needs punting to a
workqueue (can't use in_softirq()[1]).
- Add missing inc of netfs_n_rh_read stat.
- Move initial definition of fscache_begin_read_operation() elsewhere.
- Need to call op->begin_cache_operation() from netfs_write_begin().
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1]
Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2]
Link: https://lore.kernel.org/r/161781045123.463527.14533348855710902201.stgit@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/161781046256.463527.18158681600085556192.stgit@warthog.procyon.org.uk/ [4]
Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [5]
Link: https://lore.kernel.org/r/161118141321.1232039.8296910406755622458.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161036700.2537118.11170748455436854978.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340399569.1303470.1138884774643385730.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539542874.286939.13337898213448136687.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653799826.2770958.9015430297426331950.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789081462.6155.3853904866933313256.stgit@warthog.procyon.org.uk/ # v6
|
|
Add a helper to do the pre-reading work for the netfs write_begin address
space op.
Changes
v6:
- Fixed a missing rreq put in netfs_write_begin()[3].
- Use DEFINE_READAHEAD()[4].
v5:
- Made the wait for PG_fscache in netfs_write_begin() killable[2].
v4:
- Added flag to netfs_subreq_terminated() to indicate that the caller may
have been running async and stuff that might sleep needs punting to a
workqueue (can't use in_softirq()[1]).
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1]
Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2]
Link: https://lore.kernel.org/r/161781042127.463527.9154479794406046987.stgit@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/1234933.1617886271@warthog.procyon.org.uk/ [4]
Link: https://lore.kernel.org/r/160588543960.3465195.2792938973035886168.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118140165.1232039.16418853874312234477.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161035539.2537118.15674887534950908530.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340398368.1303470.11242918276563276090.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539541541.286939.1889738674057013729.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653798616.2770958.17213315845968485563.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789080530.6155.1011847312392330491.stgit@warthog.procyon.org.uk/ # v6
|
|
Add three tracepoints to track the activity of the read helpers:
(1) netfs/netfs_read
This logs entry to the read helpers and also expansion of the range in
a readahead request.
(2) netfs/netfs_rreq
This logs the progress of netfs_read_request objects which track
read requests. A read request may be a compound of multiple
subrequests.
(3) netfs/netfs_sreq
This logs the progress of netfs_read_subrequest objects, which track
the contributions from various sources to a read request.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/161118138060.1232039.5353374588021776217.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161033468.2537118.14021843889844001905.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340395843.1303470.7355519662919639648.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539538693.286939.10171713520419106334.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653796447.2770958.1870655382450862155.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789078003.6155.17814844411672989942.stgit@warthog.procyon.org.uk/ # v6
|
|
|
|
When a file gets deleted on a zoned file system, the space freed is not
returned back into the block group's free space, but is migrated to
zone_unusable.
As this zone_unusable space is behind the current write pointer it is not
possible to use it for new allocations. In the current implementation a
zone is reset once all of the block group's space is accounted as zone
unusable.
This behaviour can lead to premature ENOSPC errors on a busy file system.
Instead of only reclaiming the zone once it is completely unusable,
kick off a reclaim job once the amount of unusable bytes exceeds a user
configurable threshold between 51% and 100%. It can be set per mounted
filesystem via the sysfs tunable bg_reclaim_threshold which is set to 75%
by default.
Similar to reclaiming unused block groups, these dirty block groups are
added to a to_reclaim list and then on a transaction commit, the reclaim
process is triggered but after we deleted unused block groups, which will
free space for the relocation process.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove x86's trace_kvm_age_page() tracepoint. It's mostly redundant with
the common trace_kvm_age_hva() tracepoint, and if there is a need for the
extra details, e.g. gfn, referenced, etc... those details should be added
to the common tracepoint so that all architectures and MMUs benefit from
the info.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move arm64's MMU notifier trace events into common code in preparation
for doing the hva->gfn lookup in common code. The alternative would be
to trace the gfn instead of hva, but that's not obviously better and
could also be done in common code. Tracing the notifiers is also quite
handy for debug regardless of architecture.
Remove a completely redundant tracepoint from PPC e500.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch added a tracepoint in subflow_check_data_avail() to show the
mapping status.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch added a tracepoint in ack_update_msk() to track the
incoming data_ack and window/snd_una updates.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch added a tracepoint in the mapping status function
get_mapping_status() to dump every mpext field.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
