summaryrefslogtreecommitdiff
path: root/include/linux/mfd
AgeCommit message (Collapse)Author
2022-09-28mfd: rk808: Add Rockchip rk817 battery charger supportChris Morgan
Add rk817 charger support cell to rk808 mfd driver. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220808173809.11320-3-macroalpha82@gmail.com
2022-09-09mfd: ocelot: Add helper to get regmap from a resourceColin Foster
Several ocelot-related modules are designed for MMIO / regmaps. As such, they often use a combination of devm_platform_get_and_ioremap_resource() and devm_regmap_init_mmio(). Operating in an MFD might be different, in that it could be memory mapped, or it could be SPI, I2C... In these cases a fallback to use IORESOURCE_REG instead of IORESOURCE_MEM becomes necessary. When this happens, there's redundant logic that needs to be implemented in every driver. In order to avoid this redundancy, utilize a single function that, if the MFD scenario is enabled, will perform this fallback logic. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220905162132.2943088-2-colin.foster@in-advantage.com
2022-08-06Merge tag 'mfd-next-5.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Framework: - Change maintainer email address - Use acpi_dev_for_each_child() helper to walk the ACPI list New Device Support: - BCM2711 RPiVid ASB in Broadcom BCM2835 - MT8195 dual-core RISC-V MCU in Chrome OS Embedded Controller - Regulator, RTC and Keys in MediaTek MT6357 PMIC - GPIO in X-Powers AXP20x PMIC - MT6331 and MT6332 in MediaTek MT6357 PMIC - Intel Meteor Lake-P PCI in Intel LPSS PCI New Functionality: - Add support for non-ACPI platforms; lpc_ich Fix-ups: - Use platform data instead of hard-coded values; bcm2835-pm - Make use of BIT/GENMASK macros; intel_soc_pmic_bxtwc - Use dev_err_probe() helper; intel_soc_pmic_chtwc, intel_soc_pmic_bxtwc - Use provided generic APIs / helpers; lpc_ich - Clean-up .remove() return values; asic3, t7l66xb, tc6387xb, tc6393xb - Use correct formatting specifiers; syscon - Replace sprintf() with sysfs_emit(); intel_soc_pmic_bxtwc - Automatically detect and fill USB endpoint pointers; dln2 - Use more appropriate dev/platform/spi resources APIs; intel_soc_pmic_bxtwc - Make use of pm_sleep_ptr(); intel_soc_pmic_chtwc, intel_soc_pmic_bxtwc - Improve error handling; intel_soc_pmic_bxtwc - Use core driver API to create groups; intel_soc_pmic_bxtwc - Kconfig fix-ups; MFD_SUN6I_PRCM - Admin: whitespace/email addresses/etc; max77714, db8500-prcmu, ipaq-micro, intel_soc_pmic_bxtwc - Remove duplicate/unused code/functionality; lpc_ich, twl-core, qcom-pm8008, intel_soc_pmic_bxtwc - DT fix-ups / conversions; da9063, ti,j721e-system-controller, st,stm32-timers, mt6397, qcom,tcsr, mps,mp2629, qcom-pm8xxx, fsl,imx8qxp-csr Bug Fixes: - Fix of_node reference leak; max77620" * tag 'mfd-next-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits) dt-bindings: mfd: stm32-timers: Move fixed string node names under 'properties' dt-bindings: mfd: st,stm32-timers: Correct 'resets' property name dt-bindings: mfd: syscon: Update Lee Jones' email address MAINTAINERS: Use Lee Jones' kernel.org address for Syscon submissions MAINTAINERS: Use Lee Jones' kernel.org address for MFD submissions mfd: sun6i-prcm: Update Kconfig description mfd: intel_soc_pmic_bxtwc: Fix spelling in the comment mfd: intel_soc_pmic_bxtwc: Drop unneeded casting mfd: intel_soc_pmic_bxtwc: Use sysfs_emit() instead of sprintf() mfd: intel_soc_pmic_bxtwc: Use bits.h macros for all masks mfd: intel_soc_pmic_bxtwc: Drop redundant ACPI_PTR() mfd: intel_soc_pmic_bxtwc: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc mfd: intel_soc_pmic_bxtwc: Extend use of temporary variable for struct device mfd: intel_soc_pmic_bxtwc: Use dev_err_probe() mfd: intel_soc_pmic_bxtwc: Convert to use platform_get/set_drvdata() mfd: intel_soc_pmic_bxtwc: Create sysfs attributes using core driver's facility mfd: intel_soc_pmic_bxtwc: Don't shadow error codes in show()/store() mfd: intel-lpss: Add Intel Meteor Lake-P PCI IDs mfd: mt6397: Add basic support for MT6331+MT6332 PMIC mfd: axp20x: Add AXP221/AXP223/AXP809 GPIO cells ...
2022-08-04Merge tag 'gpio-updates-for-v6.0-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "Here are the updates for this merge window from the GPIO subsystem. We have more lines removed than added thanks to dropping of a driver for a platform that's no longer supported. Otherwise the changes are pretty straightforward: support for some new models, various improvements to existing drivers, some tweaks to the core library code and DT bindings updates. Summary: - remove gpio-vr41xx driver as the only platform using it got dropped too - add support for suspend/resume to gpio-davinci - improvements to the GPIO character device code - add support for disabling bias for in-kernel users (up until now only user-space could set it) - drop unused devm_gpio_free() - fix a refcount issue in gpiolib OF - use device match helpers where applicable - add support for a new model to gpio-rockchip - non-functional improvements in gpio-adp5588 - improve and simplify teardown in gpio-twl4030 and gpio-ucb1400 - modernize the gpio-74xx-mmio and gpio-adnp drivers - coding style improvements in gpio-xilinx, gpio-104-idi-48 - support new model (pca9571) in gpio-pca9570 - convert the DT bindings to YAML for gpio-mvebu and update the document - don't return error codes from remove() in gpio-brcmstb - add a library for the intel 8255 PPI interface and use it in drivers - reduce using magic numbers and improve code readability in several drivers - convert DT bindings to YAML for gpio-tpic2810 - add new models to DT bindings for gpio-frl-imx - Kconfig improvements - other minor tweaks and improvements" * tag 'gpio-updates-for-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (52 commits) dt-bindings: gpio: fsl-imx-gpio: Add i.MXRT compatibles gpio: 74xx-mmio: Use bits instead of plain numbers for flags gpio: xilinx: add missing blank line after declarations MAINTAINERS: Update Intel 8255 GPIO driver file list gpio: gpio-mm: Implement and utilize register structures gpio: 104-idi-48: Implement and utilize register structures gpio: 104-dio-48e: Implement and utilize register structures gpio: i8255: Introduce the Intel 8255 interface library module gpio: 104-idio-16: Implement and utilize register structures gpio: ws16c48: Implement and utilize register structures gpio: remove VR41XX related gpio driver dt-bindings: gpio: add pull-disable flag gpiolib: acpi: support bias pull disable gpiolib: of: support bias pull disable gpiolib: add support for bias pull disable gpio: 74xx-mmio: use bits.h macros for all masks gpio: 74xx-mmio: Check MMIO_74XX_DIR_IN flag in mmio_74xx_dir_in() gpio: 74xx-mmio: Make use of device properties gpiolib: cdev: compile out HTE unless CONFIG_HTE selected gpiolib: cdev: consolidate edge detector configuration flags ...
2022-08-04Merge tag 'spdx-6.0-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...
2022-07-19mfd: mt6397: Add basic support for MT6331+MT6332 PMICAngeloGioacchino Del Regno
Add support for the MT6331 PMIC with MT6332 Companion PMIC, found in MT6795 Helio X10 smartphone platforms. This combo has support for multiple devices but, for a start, only the following have been implemented: - Regulators (two instances, one in MT6331, one in MT6332) - RTC (MT6331) - Keys (MT6331) - Interrupts (MT6331 also dispatches MT6332's interrupts) There's more to be implemented, especially for MT6332, which will come at a later stage. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220627123954.64299-1-angelogioacchino.delregno@collabora.com
2022-07-19mfd: ipaq-micro: Fix spelling mistake of "receive{d}"Zhang Jiaming
Change 'receieved' to 'received' and 'recieve' to 'receive'. Signed-off-by: Zhang Jiaming <jiaming@nfschina.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220623073333.5675-1-jiaming@nfschina.com
2022-07-19mfd: tc6393xb: Make disable callback return voidUwe Kleine-König
All implementations return 0, so simplify accordingly. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220619082655.53728-1-u.kleine-koenig@pengutronix.de
2022-07-19mfd: twl: Remove platform data supportUwe Kleine-König
There is no in-tree machine that provides a struct twl4030_platform_data since commit e92fc4f04a34 ("ARM: OMAP2+: Drop legacy board file for LDP"). So assume dev_get_platdata() returns NULL in twl_probe() and simplify accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220614152148.252820-1-u.kleine-koenig@pengutronix.de
2022-07-19mfd: mt6358-irq: Add MT6357 PMIC supportFabien Parent
Add MT6357 PMIC IRQ support. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220531124959.202787-6-fparent@baylibre.com
2022-07-19mfd: mt6397-core: Add MT6357 PMIC supportFabien Parent
Adds support for PMIC keys, Regulator, and RTC for the MT6357 PMIC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220531124959.202787-5-fparent@baylibre.com
2022-07-19mfd: tc6387xb: Drop disable callback that is never calledUwe Kleine-König
The driver never calls the disable callback, so drop the member from the platform struct and all callbacks from the actual platform datas. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220530192430.2108217-4-u.kleine-koenig@pengutronix.de
2022-07-19mfd: t7l66xb: Drop platform disable callbackUwe Kleine-König
None of the in-tree instantiations of struct t7l66xb_platform_data provides a disable callback. So better don't dereference this function pointer unconditionally. As there is no user, drop it completely instead of calling it conditional. This is a preparation for making platform remove callbacks return void. Fixes: 1f192015ca5b ("mfd: driver for the T7L66XB TMIO SoC") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220530192430.2108217-3-u.kleine-koenig@pengutronix.de
2022-07-19mfd: max77714: Update Luca Ceresoli's e-mail addressLuca Ceresoli
My Bootlin address is preferred from now on. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220603155727.1232061-4-luca@lucaceresoli.net
2022-07-19gpio: twl4030: Drop platform teardown callbackUwe Kleine-König
There is no machine providing a teardown callback, so drop the unused code. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-04mfd: bcm2835-pm: Add support for BCM2711Stefan Wahren
In BCM2711 the new RPiVid ASB took over V3D. The old ASB is still present with the ISP and H264 bits, and V3D is in the same place in the new ASB as the old one. As per the devicetree bindings, BCM2711 will provide both the old and new ASB resources, so get both of them and pass them into 'bcm2835-power,' which will take care of selecting which one to use accordingly. Since the RPiVid ASB's resources were being provided prior to formalizing the bindings[1], also support the old DT files that didn't use 'reg-names.' [1] See: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220625113619.15944-8-stefan.wahren@i2se.com
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULEThomas Gleixner
Based on the normalized pattern: this program is free software you can redistribute it and/or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed as is without any warranty of any kind whether expressed or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license version 2 for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE ↵Thomas Gleixner
(part 2) Based on the normalized pattern: this program is free software you can redistribute it and/or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed as is without any warranty of any kind whether express or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-02Merge tag 'arm-multiplatform-5.19-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ...
2022-05-27Merge tag 'mfd-next-5.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support - Add support for {Power,Home} Keys to MediaTek MT6359 - Add support for SC2730 to Spreadtrum SPRD SC27XX SPI - Add support for additional Alder Lake-P I2C Controllers to Intel LPSS PCI Fix-ups: - Convert GPIO to GPIOD (hi655x-pmic) - Only register devices that exist (cros_ec_dev) - Remove unused code (syscon, reg-mux) - Rework .remove() API to return void (twl-core, rt4831) - Trivial - whitespace, spelling, coding style (tps65218, sprd-sc27xx-spi, google,cros-ec) - DT binding changes (samsung,exynos5433-lpass, rockchip,rk805, rockchip,rk808, rockchip,rk809, rockchip,rk817, rockchip,rk818, wlf,arizona) Bug Fixes: - Fix error handling bugs (ipaq-micro, davinci_voicecodec)" * tag 'mfd-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: dt-bindings: cros-ec: Fix a typo in description dt-bindings: mfd: wlf,arizona: Add spi-max-frequency mfd: rt4831: Improve error reporting for problems during .remove() mfd: davinci_voicecodec: Fix possible null-ptr-deref davinci_vc_probe() mfd: intel-lpss: Add support for ADL-P i2c6 and i2c7 dt-bindings: mfd: rk808: Convert bindings to yaml mfd: twl4030: Make twl4030_exit_irq() return void mfd: twl6030: Make twl6030_exit_irq() return void dt-bindings: mfd: samsung,exynos5433-lpass: Fix 'dma-channels/requests' properties mfd: sprd: Jugle {of,spi}_device_id tables into numerical order mfd: sprd: Add SC2730 PMIC to SPI device ID table dt-bindings: Drop undocumented i.MX iomuxc-gpr bindings in examples mfd: cros_ec_dev: Only register PCHG device if present mfd: mt6397-core: Add resources for PMIC keys for MT6359 mfd: mt6359: Add missing defines necessary for mtk-pmic-keys support mfd: ipaq-micro: Fix error check return value of platform_get_irq() mfd: hi655x-pmic: Replace legacy gpio interface for gpiod interface mfd: tps65218: Fix trivial typo in comment
2022-05-17ptp: ptp_clockmatrix: Add PTP_CLK_REQ_EXTTS supportMin Li
Use TOD_READ_SECONDARY for extts to keep TOD_READ_PRIMARY for gettime and settime exclusively. Before this change, TOD_READ_PRIMARY was used for both extts and gettime/settime, which would result in changing TOD read/write triggers between operations. Using TOD_READ_SECONDARY would make extts independent of gettime/settime operation Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/1652712427-14703-1-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-07ARM/pxa/mfd/power/sound: Switch Tosa to GPIO descriptorsLinus Walleij
The Tosa device (Sharp SL-6000) has a mishmash driver set-up for the Toshiba TC6393xb MFD that includes a battery charger and touchscreen and has some kind of relationship to the SoC sound driver for the AC97 codec. Other devices define a chip like this but seem only half-implemented, not really handling battery charging etc. This patch switches the Toshiba MFD device to provide GPIO descriptors to the battery charger and SoC codec. As a result some descriptors need to be moved out of the Tosa boardfile and new one added: all SoC GPIO resources to these drivers now comes from the main boardfile, while the MFD provide GPIOs for its portions. As a result we can request one GPIO from our own GPIO chip and drop two hairy callbacks into the board file. This platform badly needs to have its drivers split up and converted to device tree probing to handle this quite complex relationship in an orderly manner. I just do my best in solving the GPIO descriptor part of the puzzle. Please don't ask me to fix everything that is wrong with these driver to todays standards, I am just trying to fix one aspect. I do try to use modern devres resource management and handle deferred probe using new functions where appropriate. Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Dirk Opfer <dirk@opfer-online.de> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Reviewed-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-26mfd: mt6359: Add missing defines necessary for mtk-pmic-keys supportFabien Parent
Add 2 missing MT6359 registers that are needed to implement the keyboard driver. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220415153629.1817202-3-fparent@baylibre.com
2022-04-26mfd: hi655x-pmic: Replace legacy gpio interface for gpiod interfaceMaíra Canal
Considering the current transition of the GPIO subsystem, remove all dependencies of the legacy GPIO interface (linux/gpio.h and linux /of_gpio.h) and replace it with the descriptor-based GPIO approach. Signed-off-by: Maíra Canal <maira.canal@usp.br> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/Yk2maZuf+5FGL+eg@fedora
2022-04-26mfd: tps65218: Fix trivial typo in commentDaniel Ammann
The driver is for TPS65218, not TPS65219. Signed-off-by: Daniel Ammann <daniel.ammann@bytesatwork.ch> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220405125426.28016-1-daniel.ammann@bytesatwork.ch
2022-03-25Merge tag 'mfd-next-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Maxim MAX77714 PMIC Removed Drivers: - Remove support for ST-Ericsson AB8500 DebugFS New Device Support: - Add support for Silergy SY7636A to Simple MFD I2C - Add support for MediaTek MT6366 PMIC to MT6358 IRQ - Add support for Charger to Intel PMIC CRC - Add support for Raptor Lake to Intel LPSS PCI New Functionality: - Add support for Reboot to Rockchip RK808 Fix-ups: - Device Tree changes (includcing YAML conversion) for silergy,sy7636a, maxim,max77843, google,cros-ec, maxim,max14577, maxim,max77802, maxim,max77714, qcom,tcsr, qcom,spmi-pmic, stericsson,ab8500, stericsson,db8500-prcmu, samsung,exynos5433-lpass, mt6397, syscon, brcm,cru - Visible to menuconfig; simple-mfd-i2c - Clean-up or clarify code; max77686, intel_soc_pmic_crc - Improve error handling; mc13xxx-core, stmfx, asic3 - Pass device information to child devices; iqs62x, intel-lpss-acpi - Individually identify IRQ domains; intel_soc_pmic_core - Remove superfluous code; dbx500-prcmu, exynos-lpass - Staticify and constify; arizona-i2c - Mark sometimes used data as __maybe_unused; atmel-flexcom - Account for different ACPI tables on AOSP/Windows platforms; arizona-spi - Use provided (platform) APIs; ab8500-core - Trivial (whitespace, spelling); rohm-bd9576" * tag 'mfd-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits) dt-bindings: mfd: syscon: Add microchip,lan966x-cpu-syscon compatible mfd: bd9576: fix typos in comments mfd: Use platform_get_irq() to get the interrupt mfd: db8500-prcmu: Remove unused inline function mfd: arizona-spi: Add Android board ACPI table handling mfd: arizona-spi: Split Windows ACPI init code into its own function mfd: asic3: Add missing iounmap() on error asic3_mfd_probe MAINTAINERS: Rectify entry for ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS mfd: intel-lpss: Provide an SSP type to the driver dt-bindings: mfd: brcm,cru: Rename pinctrl node dt-bindings: Add compatibles for undocumented trivial syscons mfd: atmel-flexcom: Fix compilation warning dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema mfd: exynos-lpass: Drop unneeded syscon.h include mfd: intel-lpss: Add Intel Raptor Lake PCH-S PCI IDs mfd: ab8500: Drop debugfs module mfd: sta2x11: Use GFP_KERNEL instead of GFP_ATOMIC mfd: ab8500: Rewrite bindings in YAML mfd: qcom-spmi-pmic: Add pm8953 compatible ...
2022-03-25Merge tag 'for-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - Introduce "Bypass" charging type used by USB PPS standard - Refactor power_supply_set_input_current_limit_from_supplier() - Add fwnode support to power_supply_get_battery_info() Drivers: - ab8500: continue migrating towards using standard core APIs - axp288 fuel-gauge: refactor driver to be fully resource managed - battery-samsung-sdi: new in-kernel provider for (constant) Samsung battery info - bq24190: disable boost regulator on shutdown - bq24190: add support for battery-info on ACPI based systems - bq25890: prepare driver for usage on ACPI based systems - bq25890: add boost regulator support - cpcap-battery: add NVMEM based battery detection support - injoinic ip5xxx: new driver for power bank IC - upi ug3105: new battery driver - misc small improvements and fixes" * tag 'for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (94 commits) power: ab8500_chargalg: Use CLOCK_MONOTONIC power: supply: Add a driver for Injoinic power bank ICs dt-bindings: trivial-devices: Add Injoinic power bank ICs dt-bindings: vendor-prefixes: Add Injoinic power: supply: ab8500: Remove unused variable power: supply: da9150-fg: Remove unnecessary print function dev_err() power: supply: ab8500: fix a handful of spelling mistakes power: supply: ab8500_fg: Account for line impedance dt-bindings: power: supply: ab8500_fg: Add line impedance power: supply: axp20x_usb_power: fix platform_get_irq.cocci warnings power: supply: axp20x_ac_power: fix platform_get_irq.cocci warning power: supply: wm8350-power: Add missing free in free_charger_irq power: supply: wm8350-power: Handle error for wm8350_register_irq power: supply: Static data for Samsung batteries power: supply: ab8500_fg: Use VBAT-to-Ri if possible power: supply: Support VBAT-to-Ri lookup tables power: supply: ab8500: Standardize BTI resistance power: supply: ab8500: Standardize alert mode charging power: supply: ab8500: Standardize maintenance charging power: supply: bq24190_charger: Delay applying charge_type changes when OTG 5V Vbus boost is on ...
2022-03-24Merge tag 'net-next-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...
2022-03-23mfd: db8500-prcmu: Remove unused inline functionYueHaibing
commit b0e846248de5 ("mfd: db8500-prcmu: Remove dead code for a non-existing config") left behind this, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220311125518.31064-1-yuehaibing@huawei.com
2022-03-09ptp: idt82p33: use rsmu driver to access i2c/spi busMin Li
rsmu (Renesas Synchronization Management Unit ) driver is located in drivers/mfd and responsible for creating multiple devices including idt82p33 phc, which will then use the exposed regmap and mutex handle to access i2c/spi bus. Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/1646748651-16811-1-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-08mfd: rk808: Add reboot support to rk808.cPeter Geis
This adds reboot support to the rk808 pmic driver and enables it for the rk809 and rk817 devices. This only enables if the rockchip,system-power-controller flag is set. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220208194023.929720-1-pgwipeout@gmail.com
2022-03-08mfd: db8500-prcmu: Remove dead code for a non-existing configLukas Bulwahn
The config DBX500_PRCMU_QOS_POWER was never introduced in the kernel repository. So, the ifdef in ./include/linux/mfd/dbx500-prcmu.h was never effective. Remove these dead function prototypes. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211227064839.21405-1-lukas.bulwahn@gmail.com
2022-03-08Merge branches 'ib-mfd-hwmon-regulator-5.18', 'ib-mfd-iio-5.18', ↵Lee Jones
'ib-mfd-led-power-regulator-5.18', 'ib-mfd-mediatek-mt6366-5.18', 'ib-mfd-rtc-watchdog-5.18' and 'ib-mfd-spi-dt-5.18' into ibs-for-mfd-merged
2022-03-07mfd: Add support for the MediaTek MT6366 PMICJohnson Wang
This adds support for the MediaTek MT6366 PMIC. This is a multifunction device with the following sub modules: - Regulator - RTC - Codec - Interrupt It is interfaced to the host controller using SPI interface by a proprietary hardware called PMIC wrapper or pwrap. MT6366 MFD is a child device of the pwrap. Signed-off-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220106065407.16036-2-johnson.wang@mediatek.com
2022-03-07mfd: max77714: Add driver for Maxim MAX77714 PMICLuca Ceresoli
Add a simple driver for the Maxim MAX77714 PMIC, supporting RTC and watchdog only. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2022-03-07rtc: max77686: Rename day-of-month definesLuca Ceresoli
RTC_DATE and REG_RTC_DATE are used for the registers holding the day of month. Rename these constants to mean what they mean. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2022-02-14mfd: iqs62x: Provide device revision to sub-devicesJeff LaBundy
Individual sub-devices may elect to make decisions based on the specific revision of silicon encountered at probe. This data is already read from the device, but is not retained. Pass this data on to the sub-devices by adding the software and hardware numbers (registers 0x01 and 0x02, respectively) to the iqs62x_core struct. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2022-02-14mtd: spi-nor: intel-spi: Convert to SPI MEMMika Westerberg
The preferred way to implement SPI-NOR controller drivers is through SPI subsubsystem utilizing the SPI MEM core functions. This converts the Intel SPI flash controller driver over the SPI MEM by moving the driver from SPI-NOR subsystem to SPI subsystem and in one go make it use the SPI MEM functions. The driver name will be changed from intel-spi to spi-intel to match the convention used in the SPI subsystem. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mauro Lima <mauro.lima@eclypsium.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20220209122706.42439-3-mika.westerberg@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-08mfd: simple-mfd-i2c: Enable support for the silergy,sy7636aAlistair Francis
Signed-off-by: Alistair Francis <alistair@alistair23.me> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2022-02-01mfd: intel_soc_pmic_chtwc: Add cht_wc_model data to struct intel_soc_pmicHans de Goede
Tablet / laptop designs using an Intel Cherry Trail x86 main SoC with an Intel Whiskey Cove PMIC do not use a single standard setup for the charger, fuel-gauge and other chips surrounding the PMIC / charging+data USB port. Unlike what is normal on x86 this diversity in designs is not handled by the ACPI tables. On 2 of the 3 known designs there are no standard (PNP0C0A) ACPI battery devices and on the 3th design the ACPI battery device does not work under Linux due to it requiring non-standard and undocumented ACPI behavior. So to make things work under Linux we use native charger and fuel-gauge drivers on these devices, re-using the native drivers used on ARM boards with the same charger / fuel-gauge ICs. This requires various MFD-cell drivers for the CHT-WC PMIC cells to know which model they are exactly running on so that they can e.g. instantiate an I2C-client for the right model charger-IC (the charger is connected to an I2C-controller which is part of the PMIC). Rather then duplicating DMI-id matching to check which model we are running on in each MFD-cell driver, add a check for this to the shared drivers/mfd/intel_soc_pmic_chtwc.c code by using a DMI table for all 3 known models: 1. The GPD Win and GPD Pocket mini-laptops, these are really 2 models but the Pocket re-uses the GPD Win's design in a different housing: The WC PMIC is connected to a TI BQ24292i charger, paired with a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller + a PI3USB30532 USB switch, for a fully functional Type-C port. 2. The Xiaomi Mi Pad 2: The WC PMIC is connected to a TI BQ25890 charger, paired with a TI BQ27520 fuelgauge, using the TI BQ25890 for BC1.2 charger type detection, for a USB-2 only Type-C port without PD. 3. The Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 series: The WC PMIC is connected to a TI BQ25892 charger, paired with a TI BQ27542 fuelgauge, using the WC PMIC for BC1.2 charger type detection and using the BQ25892's Mediatek Pump Express+ (1.0) support to enable charging with up to 12V through a micro-USB port. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2022-01-12Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a couple patches in the framework core this time around but they're mostly minor cleanups and some debugfs stuff. The real work that's in here is the typical pile of clk driver updates and new SoC support. Per usual (or maybe just recent trends), Qualcomm gains a handful of SoC drivers additions and has the largest diffstat. After that there are quite a few updates to the Allwinner (sunxi) drivers to support modular drivers and Renesas is heavily updated to add more support for various clks. Overall it looks pretty normal. New Drivers: - Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770 - MediaTek mt7986 SoC basic support - Clock and reset driver for Toshiba Visconti SoCs - Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8) - Allwinner D1 clks - Lan966x Generic Clock Controller driver and associated DT bindings - Qualcomm SDX65, SM8450, and MSM8976 GCC clks - Qualcomm SDX65 and SM8450 RPMh clks Updates: - Set suppress_bind_attrs to true for i.MX8ULP driver - Switch from do_div to div64_ul for throughout all i.MX drivers - Fix imx8mn_clko1_sels for i.MX8MN - Remove unused IPG_AUDIO_ROOT from i.MX8MP - Switch parent for audio_root_clk to audio ahb in i.MX8MP driver - Removal of all remaining uses of __clk_lookup() in drivers/clk/samsung - Refactoring of the CPU clocks registration to use common interface - An update of the Exynos850 driver (support for more clock domains) required by the E850-96 development board - Prep for runtime PM and generic power domains on Tegra - Support modular Allwinner clk drivers via platform bus - Lan966x clock driver extended to support clock gating - Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and thermal (TSU) clocks and resets on Renesas RZ/G2L - Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2 clock drivers, and in the Renesas SDHI driver - Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable - Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add GPU clock and resets on Renesas RZ/G2L - Add clk-provider.h to various Qualcomm clk drivers - devm version of clk_hw_register_gate() - kerneldoc fixes in a couple drivers" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (131 commits) clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup() clk: mediatek: add mt7986 clock support clk: mediatek: add mt7986 clock IDs dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper clk: x86: Fix clk_gate_flags for RV_CLK_GATE clk: x86: Use dynamic con_id string during clk registration ACPI: APD: Add a fmw property clk-name drivers: acpi: acpi_apd: Remove unused device property "is-rv" x86: clk: clk-fch: Add support for newer family of AMD's SOC clk: ingenic: Add MDMA and BDMA clocks dt-bindings: clk/ingenic: Add MDMA and BDMA clocks clk: bm1880: remove kfrees on static allocations clk: Drop unused COMMON_CLK_STM32MP157_SCMI config clk: st: clkgen-mux: search reg within node or parent clk: st: clkgen-fsyn: search reg within node or parent clk: Enable/Disable runtime PM for clk_summary MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller clk: visconti: Add support common clock driver and reset driver ...
2022-01-11Merge tag 'mfd-next-5.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support: - Add support for Lakefield PCH to Intel LPSS PCI Remove Device Support: - Remove support for ROHM BD70528 Power Management IC New Functionality: - Add support for SMBus and I2C mode to Dialog DA9062/61 PMIC - Enable I2C4 on Microsoft Surface Go & Go 2 Fix-ups: - Device Tree changes (inc. YAML conversion); maxim,max77686, rohm,bd9571mwv, syscon, brcm,twd, google,cros-ec - Use __maybe_unused instead of #ifery; atmel-flexcom - Allow the Regmap API to handle endianess internally; ntxec - Utilise I2C's .resume_noirq call-back; atmel-flexcom - Remove unused code; ti_am335x_tscadc - Use CPU-id instead of ACPI _HRV to ID variants; intel_soc_pmic_core - Allow device to power-off right from .probe(); tps65910 - Trivial (whitespace, typos, etc); da9063 Bug Fixes: - Fix ordering issues during probe; intel-lpss-acpi - Fix correct clock speed; intel-lpss-pci" * tag 'mfd-next-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (25 commits) mfd: google,cros-ec: Fix property name for MediaTek rpmsg dt-bindings: mfd: Fix typo "DA9093" -> "DA9063" mfd: ntxec: Change return type of ntxec_reg8 from __be16 to u16 mfd: tps65910: Set PWR_OFF bit during driver probe mfd: intel_soc_pmic: Use CPU-id check instead of _HRV check to differentiate variants mfd: intel-lpss: Fix I2C4 not being available on the Microsoft Surface Go & Go 2 dt-bindings: mfd: Add Broadcom's Timer-Watchdog block dt-bindings: mfd: Add Freecom system controller mfd: Kconfig: Change INTEL_SOC_PMIC_CHTDC_TI to bool dt-bindings: mfd: syscon: Add samsung,exynos850-sysreg mfd: da9062: Support SMBus and I2C mode mfd: intel-lpss-pci: Fix clock speed for 38a8 UART mfd: intel-lpss: Fix too early PM enablement in the ACPI ->probe() mfd: ti_am335x_tscadc: Drop the CNTRLREG_TSC_8WIRE macro mfd: stmpe: Support disabling sub-functions mfd: atmel-flexcom: Use .resume_noirq mfd: atmel-flexcom: Remove #ifdef CONFIG_PM_SLEEP dt-bindings: mfd: bd9571mwv: Convert to json-schema mfd: intel-lpss: Add Intel Lakefield PCH PCI IDs dt-bindings: mfd: maxim,max77686: Convert to dtschema ...
2021-12-29mfd: ntxec: Change return type of ntxec_reg8 from __be16 to u16Jonathan Neuschäfer
Register values in NTXEC are big-endian on the I2C bus, but the regmap subsystem handles the conversion between CPU-endian and big-endian data internally. ntxec_reg8 should thus return u16, not __be16. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211218152553.744615-1-j.neuschaefer@gmx.net
2021-12-15clk: Introduce clk-tps68470 driverHans de Goede
The TPS68470 PMIC provides Clocks, GPIOs and Regulators. At present in the kernel the Regulators and Clocks are controlled by an OpRegion driver designed to work with power control methods defined in ACPI, but some platforms lack those methods, meaning drivers need to be able to consume the resources of these chips through the usual frameworks. This commit adds a driver for the clocks provided by the tps68470, and is designed to bind to the platform_device registered by the intel_skl_int3472 module. This is based on this out of tree driver written by Intel: https://github.com/intel/linux-intel-lts/blob/4.14/base/drivers/clk/clk-tps68470.c with various cleanups added. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211203102857.44539-7-hdegoede@redhat.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-11-29mfd: ti_am335x_tscadc: Drop the CNTRLREG_TSC_8WIRE macroDario Binacchi
In TI's reference manual description for the `AFE_Pen_Ctrl' bit-field of the TSC's CTRL register, there is no mention of 8-wire touchscreens. Even commit f0933a60d190 ("mfd: ti_am335x_tscadc: Update logic in CTRL register for 5-wire TS") says that the value of this bit-field must be the same for 4-wire and 8-wire touchscreens. So let's remove the CNTRLREG_TSC_8WIRE macro to avoid misunderstandings. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211125224642.21011-5-dariobin@libero.it
2021-11-29mfd: bd70528: Drop BD70528 supportMatti Vaittinen
The only known BD70528 use-cases are such that the PMIC is controlled from separate MCU which is not running Linux. I am not aware of any Linux driver users. Furthermore, it seems there is no demand for this IC. Let's ease the maintenance burden and drop the driver. We can always add it back if there is sudden need for it. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/cf7dfd98b3403ad363b2b48b57bdbfd57a6416cb.1637066805.git.matti.vaittinen@fi.rohmeurope.com
2021-11-24regulator: rohm-generic: remove unused dummiesMatti Vaittinen
Function rohm_regulator_set_voltage_sel_restricted() and rohm_regulator_set_dvs_levels() had inlined dummy implementations for cases when the real implementation was not configured in. All of the drivers who issue the call to these functions do SELECT the real implementation from the Kconfig. There should be no cases where the real implementation was not selected by the drivers using these functions - such a situation is likely to be an error which deserves to be noticed at compile-time. These dummies could in theory be used for compile-testing the drivers only (without the generic rohm regulator pieces). However, for such compile testing we should manually drop the selection from KConfig - and I guess that if it does not work out-of-the-box, then it is not going to happen. Especially when there should be no reason to omit compile-testing the generic rohm_regulator part. Crash test dummies. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/YZ3UXXrk/Efe7Scj@fedora Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-23regulator: rohm-generic: iniline stub functionMatti Vaittinen
The function rohm_regulator_set_voltage_sel_restricted() has a stub implementation. Linux-next testing spot following: include/linux/mfd/rohm-generic.h:93:12: error: 'rohm_regulator_set_voltage_sel_restricted' defined but not used Fix this by inlining the stub. Fixes: 8b6e88555971 ("regulator: rohm-regulator: add helper for restricted voltage setting") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/YZzEP3S7U15bTDAI@fedora Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-18regulator: rohm-regulator: add helper for restricted voltage settingMatti Vaittinen
Few ROHM PMICs have regulators where voltage setting can be done only when regulator is disabled. Add helper for those PMICs. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/6f51871e9fea611d133b5dd2560f4a7ee1ede9cd.1637233864.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-08Merge tag 'mfd-next-5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Removed Drivers: - Remove support for TI TPS80031/TPS80032 PMICs New Device Support: - Add support for Magnetic Reader to TI AM335x - Add support for DA9063_EA to Dialog DA9063 - Add support for SC2730 PMIC to Spreadtrum SC27xx - Add support for MacBookPro16,2 ICL-N UART Intel LPSS PCI - Add support for lots of new PMICS in QCom SPMI PMIC - Add support for ADC to Diolan DLN2 New Functionality: - Add support for Power Off to Rockchip RK817 Fix-ups: - Simplify Regmap passing to child devices in hi6421-spmi-pmic - SPDX licensing updates in ti_am335x_tscadc - Improve error handling in ti_am335x_tscadc - Expedite clock search in ti_am335x_tscadc - Generic simplifications in ti_am335x_tscadc - Use generic macros/defines in ti_am335x_tscadc - Remove unused code in ti_am335x_tscadc, cros_ec_dev - Convert to GPIOD in wcd934x - Add namespacing in ti_am335x_tscadc - Restrict compilation to relevant arches in intel_pmt - Provide better description/documentation in exynos_lpass - Add SPI device ID table in altera-a10sr, motorola-cpcap, sprd-sc27xx-spi - Change IRQ handling in qcom-pm8xxx - Split out I2C and SPI code in arizona - Explicitly include used headers in altera-a10sr - Convert sysfs show() function to in sysfs_emit - Standardise *_exit() and *_remove() return values in mc13xxx, stmpe, tps65912 - Trivial (style/spelling/whitespace) fixups in ti_am335x_tscadc, qcom-spmi-pmic, max77686-private - Device Tree fix-ups in ti,am3359-tscadc, samsung,s2mps11, samsung,s2mpa01, samsung,s5m8767, brcm,misc, brcm,cru, syscon, qcom,tcsr, xylon,logicvc, max77686, x-powers,ac100, x-powers,axp152, x-powers,axp209-gpio, syscon, qcom,spmi-pmic Bug Fixes: - Balance refcounting (get/put) in ti_am335x_tscadc, mfd-core - Fix IRQ trigger type in sec-irq, max77693, max14577 - Repair off-by-one in altera-sysmgr - Add explicit 'select MFD_CORE' to MFD_SIMPLE_MFD_I2C" * tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (95 commits) mfd: simple-mfd-i2c: Select MFD_CORE to fix build error mfd: tps80031: Remove driver mfd: max77686: Correct tab-based alignment of register addresses mfd: wcd934x: Replace legacy gpio interface for gpiod dt-bindings: mfd: qcom: pm8xxx: Add pm8018 compatible mfd: dln2: Add cell for initializing DLN2 ADC mfd: qcom-spmi-pmic: Add missing PMICs supported by socinfo mfd: qcom-spmi-pmic: Document ten more PMICs in the binding mfd: qcom-spmi-pmic: Sort compatibles in the driver mfd: qcom-spmi-pmic: Sort the compatibles in the binding mfd: janz-cmoio: Replace snprintf in show functions with sysfs_emit mfd: altera-a10sr: Include linux/module.h mfd: tps65912: Make tps65912_device_exit() return void mfd: stmpe: Make stmpe_remove() return void mfd: mc13xxx: Make mc13xxx_common_exit() return void dt-bindings: mfd: syscon: Add samsung,exynosautov9-sysreg compatible mfd: altera-sysmgr: Fix a mistake caused by resource_size conversion dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema dt-bindings: mfd: syscon: Add rk3368 QoS register compatible mfd: arizona: Split of_match table into I2C and SPI versions ...
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-21 18:36:12 +0000