| Age | Commit message (Collapse) | Author |
|---|
|
bottom_half.h needs _THIS_IP_ to be standalone, so split that and
_RET_IP_ out from kernel.h into the new instruction_pointer.h. kernel.h
directly needs them, so include it there and replace the include of
kernel.h with this new file in bottom_half.h.
Link: https://lkml.kernel.org/r/20211028161248.45232-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "kernel.h further split", v5.
kernel.h is a set of something which is not related to each other and
often used in non-crossed compilation units, especially when drivers
need only one or two macro definitions from it.
This patch (of 7):
There is no evidence we need kernel.h inclusion in certain headers.
Drop unneeded <linux/kernel.h> inclusion from other headers.
[sfr@canb.auug.org.au: bottom_half.h needs kernel]
Link: https://lkml.kernel.org/r/20211015202908.1c417ae2@canb.auug.org.au
Link: https://lkml.kernel.org/r/20211013170417.87909-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20211013170417.87909-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On RT a task which has soft interrupts disabled can block on a lock and
schedule out to idle while soft interrupts are pending. This triggers the
warning in the NOHZ idle code which complains about going idle with pending
soft interrupts. But as the task is blocked soft interrupt processing is
temporarily blocked as well which means that such a warning is a false
positive.
To prevent that check the per CPU state which indicates that a scheduled
out task has soft interrupts disabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210309085727.527563866@linutronix.de
|
|
Provide a local lock based serialization for soft interrupts on RT which
allows the local_bh_disabled() sections and servicing soft interrupts to be
preemptible.
Provide the necessary inline helpers which allow to reuse the bulk of the
softirq processing code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210309085727.426370483@linutronix.de
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
preempt_mask.h defines all the preempt_count semantics and related
symbols: preempt, softirq, hardirq, nmi, preempt active, need resched,
etc...
preempt.h defines the accessors and mutators of preempt_count.
But there is a messy dependency game around those two header files:
* preempt_mask.h includes preempt.h in order to access preempt_count()
* preempt_mask.h defines all preempt_count semantic and symbols
except PREEMPT_NEED_RESCHED that is needed by asm/preempt.h
Thus we need to define it from preempt.h, right before including
asm/preempt.h, instead of defining it to preempt_mask.h with the
other preempt_count symbols. Therefore the preempt_count semantics
happen to be spread out.
* We plan to introduce preempt_active_[enter,exit]() to consolidate
preempt_schedule*() code. But we'll need to access both preempt_count
mutators (preempt_count_add()) and preempt_count symbols
(PREEMPT_ACTIVE, PREEMPT_OFFSET). The usual place to define preempt
operations is in preempt.h but then we'll need symbols in
preempt_mask.h which already includes preempt.h. So we end up with
a ressource circle dependency.
Lets merge preempt_mask.h into preempt.h to solve these dependency issues.
This way we gather semantic symbols and operation definition of
preempt_count in a single file.
This is a dumb copy-paste merge. Further merge re-arrangments are
performed in a subsequent patch to ease review.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1431441711-29753-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently local_bh_disable() is out-of-line for no apparent reason.
So inline it to save a few cycles on call/return nonsense, the
function body is a single add on x86 (a few loads and store extra on
load/store archs).
Also expose two new local_bh functions:
__local_bh_{dis,en}able_ip(unsigned long ip, unsigned int cnt);
Which implement the actual local_bh_{dis,en}able() behaviour.
The next patch uses the exposed @cnt argument to optimize bh lock
functions.
With build fixes from Jacob Pan.
Cc: rjw@rjwysocki.net
Cc: rui.zhang@intel.com
Cc: jacob.jun.pan@linux.intel.com
Cc: Mike Galbraith <bitbucket@online.de>
Cc: hpa@zytor.com
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: lenb@kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131119151338.GF3694@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Impact: remove unused code
__local_bh_enable has been replaced with _local_bh_enable.
As comments says "it always nests inside local_bh_enable() sections"
has not been valid now. Also there is no reason to use __local_bh_enable
anywhere, so we can remove this useless function.
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
With CONFIG_SMP=n:
drivers/input/ff-memless.c:384: warning: implicit declaration of function 'local_bh_disable'
drivers/input/ff-memless.c:393: warning: implicit declaration of function 'local_bh_enable'
Really linux/spinlock.h should include linux/interrupt.h. But interrupt.h
includes sched.h which will need spinlock.h.
So the patch breaks the _bh declarations out into a separate header and
includes it in both interrupt.h and spinlock.h.
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Andi Kleen <ak@suse.de>
Cc: <stable@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
