| Age | Commit message (Collapse) | Author |
|---|
|
The decrementation of acpi_device_bus_id->instance_no
in acpi_device_del() is incorrect, because it may cause
a duplicate instance number to be allocated next time
a device with the same acpi_device_bus_id is added.
Replace above mentioned approach by using IDA framework.
While at it, define the instance range to be [0, 4096).
Fixes: e49bd2dd5a50 ("ACPI: use PNPID:instance_no as bus_id of ACPI device")
Fixes: ca9dc8d42b30 ("ACPI / scan: Fix acpi_bus_id_list bookkeeping")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- ARM SMMU and Mediatek updates from Will Deacon:
- Support for MT8192 IOMMU from Mediatek
- Arm v7s io-pgtable extensions for MT8192
- Removal of TLBI_ON_MAP quirk
- New Qualcomm compatible strings
- Allow SVA without hardware broadcast TLB maintenance on SMMUv3
- Virtualization Host Extension support for SMMUv3 (SVA)
- Allow SMMUv3 PMU perf driver to be built independently from IOMMU
- Some tidy-up in IOVA and core code
- Conversion of the AMD IOMMU code to use the generic IO-page-table
framework
- Intel VT-d updates from Lu Baolu:
- Audit capability consistency among different IOMMUs
- Add SATC reporting structure support
- Add iotlb_sync_map callback support
- SDHI support for Renesas IOMMU driver
- Misc cleanups and other small improvments
* tag 'iommu-updates-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (94 commits)
iommu/amd: Fix performance counter initialization
MAINTAINERS: repair file pattern in MEDIATEK IOMMU DRIVER
iommu/mediatek: Fix error code in probe()
iommu/mediatek: Fix unsigned domid comparison with less than zero
iommu/vt-d: Parse SATC reporting structure
iommu/vt-d: Add new enum value and structure for SATC
iommu/vt-d: Add iotlb_sync_map callback
iommu/vt-d: Move capability check code to cap_audit files
iommu/vt-d: Audit IOMMU Capabilities and add helper functions
iommu/vt-d: Fix 'physical' typos
iommu: Properly pass gfp_t in _iommu_map() to avoid atomic sleeping
iommu/vt-d: Fix compile error [-Werror=implicit-function-declaration]
driver/perf: Remove ARM_SMMU_V3_PMU dependency on ARM_SMMU_V3
MAINTAINERS: Add entry for MediaTek IOMMU
iommu/mediatek: Add mt8192 support
iommu/mediatek: Remove unnecessary check in attach_device
iommu/mediatek: Support master use iova over 32bit
iommu/mediatek: Add iova reserved function
iommu/mediatek: Support for multi domains
iommu/mediatek: Add get_domain_id from dev->dma_range_map
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- some core fixes in VB2 mem2mem support
- some improvements and cleanups in V4L2 async kAPI
- newer controls in V4L2 API for H-264 and HEVC codecs
- allegro-dvt driver was promoted from staging
- new i2c sendor drivers: imx334, ov5648, ov8865
- new automobile camera module: rdacm21
- ipu3 cio2 driver started gained support for some ACPI BIOSes
- new ATSC frontend: MaxLinear mxl692 VSB tuner/demod
- the SMIA/CCS driver gained more support for CSS standard
- several driver fixes, updates and improvements
* tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (362 commits)
media: v4l: async: Fix kerneldoc documentation for async functions
media: i2c: max9271: Add MODULE_* macros
media: i2c: Kconfig: Make MAX9271 a module
media: imx334: 'ret' is uninitialized, should have been PTR_ERR()
media: i2c: Add imx334 camera sensor driver
media: dt-bindings: media: Add bindings for imx334
media: ov8856: Configure sensor for GRBG Bayer for all modes
media: i2c: imx219: Implement V4L2_CID_LINK_FREQ control
media: ov5675: fix vflip/hflip control
media: ipu3-cio2: Build bridge only if ACPI is enabled
media: Remove the legacy v4l2-clk API
media: ov6650: Use the generic clock framework
media: mt9m111: Use the generic clock framework
media: ov9640: Use the generic clock framework
media: pxa_camera: Drop the v4l2-clk clock register
media: mach-pxa: Register the camera sensor fixed-rate clock
media: i2c: imx258: get clock from device properties and enable it via runtime PM
media: i2c: imx258: simplify getting state container
media: i2c: imx258: add support for binding via device tree
media: dt-bindings: media: imx258: add bindings for IMX258 sensor
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- VMBus hardening patches from Andrea Parri and Andres Beltran.
- Patches to make Linux boot as the root partition on Microsoft
Hypervisor from Wei Liu.
- One patch to add a new sysfs interface to support hibernation on
Hyper-V from Dexuan Cui.
- Two miscellaneous clean-up patches from Colin and Gustavo.
* tag 'hyperv-next-signed-20210216' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (31 commits)
Revert "Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer"
iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition
x86/hyperv: implement an MSI domain for root partition
asm-generic/hyperv: import data structures for mapping device interrupts
asm-generic/hyperv: introduce hv_device_id and auxiliary structures
asm-generic/hyperv: update hv_interrupt_entry
asm-generic/hyperv: update hv_msi_entry
x86/hyperv: implement and use hv_smp_prepare_cpus
x86/hyperv: provide a bunch of helper functions
ACPI / NUMA: add a stub function for node_to_pxm()
x86/hyperv: handling hypercall page setup for root
x86/hyperv: extract partition ID from Microsoft Hypervisor if necessary
x86/hyperv: allocate output arg pages if required
clocksource/hyperv: use MSR-based access if running as root
Drivers: hv: vmbus: skip VMBus initialization if Linux is root
x86/hyperv: detect if Linux is the root partition
asm-generic/hyperv: change HV_CPU_POWER_MANAGEMENT to HV_CPU_MANAGEMENT
hv: hyperv.h: Replace one-element array with flexible-array in struct icmsg_negotiate
hv_netvsc: Restrict configurations on isolated guests
Drivers: hv: vmbus: Enforce 'VMBus version >= 5.2' on isolated guests
...
|
|
* acpi-messages:
ACPI: OSL: Clean up printing messages
ACPI: OSL: Rework acpi_check_resource_conflict()
ACPI: thermal: Clean up printing messages
ACPI: video: Clean up printing messages
ACPI: button: Clean up printing messages
ACPI: battery: Clean up printing messages
ACPI: AC: Clean up printing messages
ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more
ACPI: utils: Clean up printing messages
ACPI: scan: Clean up printing messages
ACPI: bus: Clean up printing messages
ACPI: PM: Clean up printing messages
ACPI: power: Clean up printing messages
|
|
'acpi-apei'
* acpi-misc:
ACPI: Test for ACPI_SUCCESS rather than !ACPI_FAILURE
ACPI: Use DEVICE_ATTR_<RW|RO|WO> macros
* acpi-cppc:
ACPI: CPPC: initialise vaddr pointers to NULL
ACPI: CPPC: add __iomem annotation to generic_comm_base pointer
ACPI: CPPC: remove __iomem annotation for cpc_reg's address
* acpi-docs:
Documentation: ACPI: add new rule for gpio-line-names
* acpi-config:
ACPI: configfs: add missing check after configfs_register_default_group()
* acpi-apei:
ACPI: APEI: ERST: remove unneeded semicolon
ACPI: APEI: Add is_generic_error() to identify GHES sources
|
|
There is already a stub function for pxm_to_node but conversion to the
other direction is missing.
It will be used by Microsoft Hypervisor code later.
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210203150435.27941-9-wei.liu@kernel.org
|
|
Replace the ACPI_DEBUG_PRINT() instances in thermal.c with
acpi_handle_debug() calls and modify the ACPI_THERMAL_TRIPS_EXCEPTION()
macro in there to use acpi_handle_info() internally, which among other
things causes the excessive log level of the messages printed by it to
be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more from thermal.c, drop the no longer needed
ACPI_THERMAL_COMPONENT definition from the headers and update the
documentation accordingly.
While at it, add a pr_fmt() definition to thermal.c, drop the PREFIX
definition from there and replace some pr_warn() calls with pr_info()
or acpi_handle_info() to reduce the excessive log level and (in the
latter case) facilitate easier identification of the message source.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace the ACPI_DEBUG_PRINT() instances in acpi_video.c with
acpi_handle_debug() calls and the ACPI_EXCEPTION()/ACPI_ERROR()/
ACPI_WARNING() instances in there with acpi_handle_info() calls,
which among other things causes the excessive log levels of those
messages to be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more from acpi_video.c, drop the no longer needed
ACPI_VIDEO_COMPONENT definition from the headers and update the
documentation accordingly.
While at it, add a pr_fmt() definition to acpi_video.c, replace the
direct printk() invocations in there with acpi_handle_info() or
pr_info() (and reduce the excessive log level where applicable) and
drop the PREFIX sybmbol definition which is not necessary any more
from acpi_video.c.
Also make unrelated janitorial changes to fix up white space and
use ACPI_FAILURE() instead of negating ACPI_SUCCESS().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace the ACPI_DEBUG_PRINT() instance in button.c with an
acpi_handle_debug() call, drop the _COMPONENT and ACPI_MODULE_NAME()
definitions that are not used any more, drop the no longer needed
ACPI_BUTTON_COMPONENT definition from the headers and update the
documentation accordingly.
While at it, replace the direct printk() invocations with pr_info()
(that changes the excessive log level for some of them too) and drop
the unneeded PREFIX sybmbol definition from battery.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in battery.c with acpi_handle_debug() and acpi_handle_info() calls,
respectively, which among other things causes the excessive log
level of the messages previously printed via ACPI_EXCEPTION() to
be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more, drop the no longer needed ACPI_BATTERY_COMPONENT
definition from the headers and update the documentation accordingly.
While at it, update the pr_fmt() definition and drop the unneeded
PREFIX sybmbol definition from battery.c. Also adapt the existing
pr_info() calls to the new pr_fmt() definition.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in ac.c with acpi_handle_debug() and acpi_handle_info() calls,
respectively, which among other things causes the excessive log
level of the messages previously printed via ACPI_EXCEPTION() to
be increased.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more, drop the no longer needed ACPI_AC_COMPONENT definition
from the headers and update the documentation accordingly.
While at it, replace the direct printk() invocation with pr_info(),
add a pr_fmt() definition to ac.c and drop the unneeded PREFIX
symbol definition from there.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
After dropping all of the code using ACPI_BUS_COMPONENT drop it
too and modify the example in the documentation using it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace the remaining ACPI_DEBUG_PRINT() instances in device_pm.c
with dev_dbg() invocations, drop the _COMPONENT and ACPI_MODULE_NAME()
definitions that are not used any more, and drop the no longer needed
ACPI_POWER_COMPONENT definition from the headers and documentation.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Starting from Intel Platform VT-d v3.2, BIOS may provide new remapping
structure SATC for SOC integrated devices, according to section 8.8 of
Intel VT-d architecture specification v3.2. The SATC structure reports
a list of the devices that require ATS for normal device operation. It
is a functional requirement that these devices will not work without OS
enabling ATS capability.
This patch introduces the new enum value and structure to represent the
remapping information. Kernel should parse the information from the
reporting structure and enable ATC for the devices as needed.
Signed-off-by: Yian Chen <yian.chen@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210203093329.1617808-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210204014401.2846425-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
To ensure we handle situations in which multiple sensors of the same
model (and therefore _HID) are present in a system, we need to be able
to iterate over devices matching a known _HID but unknown _UID and _HRV
- add acpi_dev_get_next_match_dev() to accommodate that possibility and
change acpi_dev_get_first_match_dev() to simply call the new function
with a NULL starting point. Add an iterator macro for convenience.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The cpc_reg address does not represent either an I/O virtual address,
nor a field located in iomem. This address is used as an address offset
which eventually is given as physical address argument to ioremap or PCC
space offset to GET_PCC_VADDR. Therefore, having the __iomem annotation
does not make sense.
Fix the following sparse warnings by removing the __iomem annotation
for cpc_reg's address.
drivers/acpi/cppc_acpi.c:762:37: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:765:48: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:948:25: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:954:67: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:987:25: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:993:68: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:1120:13: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:1134:13: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:1137:13: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:1182:14: warning: dereference of noderef expression
drivers/acpi/cppc_acpi.c:1212:13: warning: dereference of noderef expression
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 28cb42013541950cf378582a5a5a5587061498ca
Version 20210105.
Link: https://github.com/acpica/acpica/commit/28cb4201
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This affects all ACPICA source code modules.
ACPICA commit c570953c914437e621dd5f160f26ddf352e0d2f4
Link: https://github.com/acpica/acpica/commit/c570953c
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 4534cc3700f73c88e2f6a0e0f0b9efe4fc644757
The VRTC table is no longer in use and is not defined by the ACPI
specification. Remove the table from the known, allowed tables.
Link: https://github.com/acpica/acpica/commit/4534cc37
Signed-off-by: Al Stone <ahs3@ahs3.net>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 2c39dcccda4dc250a44379ae086b8b1a3fdad115
This table is no longer in use, and is not officially defined
in the ACPI specification.
Link: https://github.com/acpica/acpica/commit/2c39dccc
Signed-off-by: Al Stone <ahs3@ahs3.net>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 830dcc2b4fd2de8f0c63f1c366f51da276fe3d85
Version 20201217.
Link: https://github.com/acpica/acpica/commit/830dcc2b
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 4b9135f5774caa796ddf826448811e8e7f08ef2f
GCC 7.1 gained -Wimplicit-fallthrough to warn on implicit fallthrough,
as well as __attribute__((__fallthrough__)) and comments to explicitly
denote that cases of fallthrough were intentional. Clang also supports
this warning and statement attribute, but not the comment form.
Robert Moore provides additional context about the lint comments being
removed. They were for "an old version of PC-Lint, which we don't use
anymore." Drop those.
This will help us enable -Wimplicit-fallthrough throughout the Linux
kernel.
Suggested-by: Robert Moore <robert.moore@intel.com>
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://github.com/acpica/acpica/commit/4b9135f5
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 1a3a549286ea9db07d7ec700e7a70dd8bcc4354e
The macros to classify different AML exception codes are broken. For
instance,
ACPI_ENV_EXCEPTION(Status)
will always evaluate to zero due to
#define AE_CODE_ENVIRONMENTAL 0x0000
#define ACPI_ENV_EXCEPTION(Status) (Status & AE_CODE_ENVIRONMENTAL)
Similarly, ACPI_AML_EXCEPTION(Status) will evaluate to a non-zero
value for error codes of type AE_CODE_PROGRAMMER, AE_CODE_ACPI_TABLES,
as well as AE_CODE_AML, and not just AE_CODE_AML as the name suggests.
This commit fixes those checks.
Fixes: d46b6537f0ce ("ACPICA: AML Parser: ignore all exceptions resulting from incorrect AML during table load")
Link: https://github.com/acpica/acpica/commit/1a3a5492
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the CPPC cpufreq driver and intel_pstate (which involves
updating the cpufreq core and the schedutil governor) and make
janitorial changes in the ACPI code handling processor objects.
Specifics:
- Rework the passive-mode "fast switch" path in the intel_pstate
driver to allow it receive the minimum (required) and target
(desired) performance information from the schedutil governor so as
to avoid running some workloads too fast (Rafael Wysocki).
- Make the intel_pstate driver allow the policy max limit to be
increased after the guaranteed performance value for the given CPU
has increased (Rafael Wysocki).
- Clean up the handling of CPU coordination types in the CPPC cpufreq
driver and make it export frequency domains information to user
space via sysfs (Ionela Voinescu).
- Fix the ACPI code handling processor objects to use a correct
coordination type when it fails to map frequency domains and drop a
redundant CPU map initialization from it (Ionela Voinescu, Punit
Agrawal)"
* tag 'pm-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Use most recent guaranteed performance values
cpufreq: intel_pstate: Implement the ->adjust_perf() callback
cpufreq: Add special-purpose fast-switching callback for drivers
cpufreq: schedutil: Add util to struct sg_cpu
cppc_cpufreq: replace per-cpu data array with a list
cppc_cpufreq: expose information on frequency domains
cppc_cpufreq: clarify support for coordination types
cppc_cpufreq: use policy->cpu as driver of frequency setting
ACPI: processor: fix NONE coordination for domain mapping failure
|
|
* pm-cpufreq:
cpufreq: intel_pstate: Use most recent guaranteed performance values
cpufreq: intel_pstate: Implement the ->adjust_perf() callback
cpufreq: Add special-purpose fast-switching callback for drivers
cpufreq: schedutil: Add util to struct sg_cpu
cppc_cpufreq: replace per-cpu data array with a list
cppc_cpufreq: expose information on frequency domains
cppc_cpufreq: clarify support for coordination types
cppc_cpufreq: use policy->cpu as driver of frequency setting
ACPI: processor: fix NONE coordination for domain mapping failure
ACPI: processor: Drop duplicate setting of shared_cpu_map
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20201113, fix and clean up some resources manipulation code, extend
the enumeration and gpio-line-names property documentation, clean up
the handling of _DEP during device enumeration, add a new backlight
DMI quirk, clean up transaction handling in the EC driver and make
some assorted janitorial changes.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20201113 with
changes as follows:
* Add 5 new UUIDs to the known UUID table (Bob Moore)
* Remove extreaneous "the" in comments (Colin Ian King)
* Add function trace macros to improve debugging (Erik Kaneda)
* Fix interpreter memory leak (Erik Kaneda)
* Handle "orphan" _REG for GPIO OpRegions (Hans de Goede)
- Introduce resource_union() and resource_intersection() helpers and
clean up some resource-manipulation code with the help of them
(Andy Shevchenko)
- Revert problematic commit related to the handling of resources in
the ACPI core (Daniel Scally)
- Extend the ACPI device enumeration documentation and the
gpio-line-names _DSD property documentation, clean up the latter
(Flavio Suligoi)
- Clean up _DEP handling during device enumeration, modify the list
of _DEP exceptions and the handling of it and fix up terminology
related to _DEP (Hans de Goede, Rafael Wysocki)
- Eliminate in_interrupt() usage from the ACPI EC driver (Sebastian
Andrzej Siewior)
- Clean up the advance_transaction() routine and related code in the
ACPI EC driver (Rafael Wysocki)
- Add new backlight quirk for GIGABYTE GB-BXBT-2807 (Jasper St
Pierre)
- Make assorted janitorial changes in several ACPI-related pieces of
code (Hanjun Guo, Jason Yan, Punit Agrawal)"
* tag 'acpi-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits)
ACPI: scan: Fix up _DEP-related terminology with supplier/consumer
ACPI: scan: Drop INT3396 from acpi_ignore_dep_ids[]
ACPI: video: Add DMI quirk for GIGABYTE GB-BXBT-2807
Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks"
ACPI: scan: Add PNP0D80 to the _DEP exceptions list
ACPI: scan: Call acpi_get_object_info() from acpi_add_single_object()
ACPI: scan: Add acpi_info_matches_hids() helper
ACPICA: Update version to 20201113
ACPICA: Interpreter: fix memory leak by using existing buffer
ACPICA: Add function trace macros to improve debugging
ACPICA: Also handle "orphan" _REG methods for GPIO OpRegions
ACPICA: Remove extreaneous "the" in comments
ACPICA: Add 5 new UUIDs to the known UUID table
resource: provide meaningful MODULE_LICENSE() in test suite
ASoC: Intel: catpt: Replace open coded variant of resource_intersection()
ACPI: processor: Drop duplicate setting of shared_cpu_map
ACPI: EC: Clean up status flags checks in advance_transaction()
ACPI: EC: Untangle error handling in advance_transaction()
ACPI: EC: Simplify error handling in advance_transaction()
ACPI: EC: Rename acpi_ec_is_gpe_raised()
...
|
|
The cppc_cpudata per-cpu storage was inefficient (1) additional to causing
functional issues (2) when CPUs are hotplugged out, due to per-cpu data
being improperly initialised.
(1) The amount of information needed for CPPC performance control in its
cpufreq driver depends on the domain (PSD) coordination type:
ANY: One set of CPPC control and capability data (e.g desired
performance, highest/lowest performance, etc) applies to all
CPUs in the domain.
ALL: Same as ANY. To be noted that this type is not currently
supported. When supported, information about which CPUs
belong to a domain is needed in order for frequency change
requests to be sent to each of them.
HW: It's necessary to store CPPC control and capability
information for all the CPUs. HW will then coordinate the
performance state based on their limitations and requests.
NONE: Same as HW. No HW coordination is expected.
Despite this, the previous initialisation code would indiscriminately
allocate memory for all CPUs (all_cpu_data) and unnecessarily
duplicate performance capabilities and the domain sharing mask and type
for each possible CPU.
(2) With the current per-cpu structure, when having ANY coordination,
the cppc_cpudata cpu information is not initialised (will remain 0)
for all CPUs in a policy, other than policy->cpu. When policy->cpu is
hotplugged out, the driver will incorrectly use the uninitialised (0)
value of the other CPUs when making frequency changes. Additionally,
the previous values stored in the perf_ctrls.desired_perf will be
lost when policy->cpu changes.
Therefore replace the array of per cpu data with a list. The memory for
each structure is allocated at policy init, where a single structure
can be allocated per policy, not per cpu. In order to accommodate the
struct list_head node in the cppc_cpudata structure, the now unused cpu
and cur_policy variables are removed.
For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1,
(4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows:
Before patch:
- ANY coordination:
total slack req alloc/free caller
0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810
0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808
128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070
768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4
After patch:
- ANY coordination:
total slack req alloc/free caller
256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410
0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274
Additional notes:
- A pointer to the policy's cppc_cpudata is stored in policy->driver_data
- Driver registration is skipped if _CPC entries are not present.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* acpi-apei:
ACPI, APEI: make apei_resources_all static
* acpi-misc:
ACPI: acpi_drivers.h: Update the kernel doc
ACPI: acpi_drivers.h: Remove the leftover dead code
ACPI: tiny-power-button: Simplify the code using module_acpi_driver()
ACPI: SBS: Simplify the code using module_acpi_driver()
ACPI: SBS: Simplify the driver init code
ACPI: debug: Remove the not used function
ACPI: processor: Remove the duplicated ACPI_PROCESSOR_CLASS macro
* acpi-processor:
ACPI: processor: Drop duplicate setting of shared_cpu_map
|
|
The idea behind acpi_pm_set_bridge_wakeup() was to allow bridges to
be reference counted for wakeup enabling, because they may be enabled
to signal wakeup on behalf of their subordinate devices and that
may happen for multiple times in a row, whereas for the other devices
it only makes sense to enable wakeup signaling once.
However, this becomes problematic if the bridge itself is suspended,
because it is treated as a "regular" device in that case and the
reference counting doesn't work.
For instance, suppose that there are two devices below a bridge and
they both can signal wakeup. Every time one of them is suspended,
wakeup signaling is enabled for the bridge, so when they both have
been suspended, the bridge's wakeup reference counter value is 2.
Say that the bridge is suspended subsequently and acpi_pci_wakeup()
is called for it. Because the bridge can signal wakeup, that
function will invoke acpi_pm_set_device_wakeup() to configure it
and __acpi_pm_set_device_wakeup() will be called with the last
argument equal to 1. This causes __acpi_device_wakeup_enable()
invoked by it to omit the reference counting, because the reference
counter of the target device (the bridge) is 2 at that time.
Now say that the bridge resumes and one of the device below it
resumes too, so the bridge's reference counter becomes 0 and
wakeup signaling is disabled for it, but there is still the other
suspended device which may need the bridge to signal wakeup on its
behalf and that is not going to work.
To address this scenario, use wakeup enable reference counting for
all devices, not just for bridges, so drop the last argument from
__acpi_device_wakeup_enable() and __acpi_pm_set_device_wakeup(),
which causes acpi_pm_set_device_wakeup() and
acpi_pm_set_bridge_wakeup() to become identical, so drop the latter
and use the former instead of it everywhere.
Fixes: 1ba51a7c1496 ("ACPI / PCI / PM: Rework acpi_pci_propagate_wakeup()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
|
|
ACPICA commit 090f0444238bd49f563bf80f4f3a863463dfdf78
Version 20201113.
Link: https://github.com/acpica/acpica/commit/090f0444
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
All UUID entries are related to NVDIMM and the NFIT table.
ACPICA commit c114a02798dd07ccc7e51ffa4365bf039a0dd8d5
Link: https://github.com/acpica/acpica/commit/c114a027
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
pci_bind.c is not exist anymore, so just remove all the
.c file reference as the c file reference is not useful
and avoid future non-consistency update.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After commit 5ba8b1c6fe40 ("ACPI: remove dead code"),
ACPI_PROCESSOR_LIMIT_* macros are not used anymore, remove it.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
Liu)
- Add schedule point in pci_read_config() to reduce max latency
(Jiang Biao)
- Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)
Resource management:
- Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo
Pieralisi)
PCIe native device hotplug:
- Reduce noisiness on hot removal (Lukas Wunner)
Power management:
- Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
that was done on the basis of spec typo (Bjorn Helgaas)
- Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
ambiguity (Krzysztof Wilczyński)
- Remove unused pcibios_pm_ops (Vaibhav Gupta)
IOMMU:
- Enable Translation Blocking for external devices to harden against
DMA attacks (Rajat Jain)
Error handling:
- Add an ACPI APEI notifier chain for vendor CPER records to enable
device-specific error handling (Shiju Jose)
ASPM:
- Remove struct aspm_register_info to simplify code (Saheed O.
Bolarinwa)
Amlogic Meson PCIe controller driver:
- Build as module by default (Kevin Hilman)
Ampere Altra PCIe controller driver:
- Add MCFG quirk to work around non-standard ECAM implementation
(Tuan Phan)
Broadcom iProc PCIe controller driver:
- Set affinity mask on MSI interrupts (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
- Add DT bindings for more Brcmstb chips (Jim Quinlan)
- Add bcm7278 register info (Jim Quinlan)
- Add bcm7278 PERST# support (Jim Quinlan)
- Add suspend and resume pm_ops (Jim Quinlan)
- Add control of rescal reset (Jim Quinlan)
- Set additional internal memory DMA viewport sizes (Jim Quinlan)
- Accommodate MSI for older chips (Jim Quinlan)
- Set bus max burst size by chip type (Jim Quinlan)
- Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Use dev_err_probe() to reduce redundant messages (Anson Huang)
Freescale Layerscape PCIe controller driver:
- Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
- Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint test support for lS1088a (Xiaowei Bao)
- Add MSI-X support for ls1088a (Xiaowei Bao)
HiSilicon HIP PCIe controller driver:
- Handle HIP-specific errors via ACPI APEI (Yicong Yang)
HiSilicon Kirin PCIe controller driver:
- Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)
Intel VMD host bridge driver:
- Factor out physical offset, bus offset, IRQ domain, IRQ allocation
(Jon Derrick)
- Use generic PCI PM correctly (Jon Derrick)
Marvell Aardvark PCIe controller driver:
- Fix compilation on s390 (Pali Rohár)
- Implement driver 'remove' function and allow to build it as module
(Pali Rohár)
- Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
- Convert mvebu a3700 internal SMCC firmware return codes to errno
(Pali Rohár)
- Fix initialization with old Marvell's Arm Trusted Firmware (Pali
Rohár)
Microsoft Hyper-V host bridge driver:
- Fix hibernation in case interrupts are not re-created (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Stop checking return value of debugfs_create() functions (Greg
Kroah-Hartman)
- Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)
Qualcomm PCIe controller driver:
- Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)
Renesas R-Car PCIe controller driver:
- Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
(Lad Prabhakar)
- Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
- Add DT support for r8a7742 (Lad Prabhakar)
Socionext UniPhier Pro5 controller driver:
- Add DT descriptions of iATU register (host and endpoint) (Kunihiko
Hayashi)
Synopsys DesignWare PCIe controller driver:
- Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
unavoidable) (Hou Zhiqiang)
- Fix endpoint Header Type check so multi-function devices work (Hou
Zhiqiang)
- Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
- Stop leaking MSI page in suspend/resume (Jisheng Zhang)
- Add common iATU register support instead of keystone-specific code
(Kunihiko Hayashi)
- Major config space access and other cleanups in dwc core and
drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
kirin, meson, qcom, tegra) (Rob Herring)
- Add multiple PFs support for endpoint (Xiaowei Bao)
- Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)
Miscellaneous:
- Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
- Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
- Fix "cast truncates bits from constant value" warnings (Gustavo
Pimentel)
- Remove redundant zeroing for sg_init_table() (Julia Lawall)
- Use scnprintf(), not snprintf(), in sysfs "show" functions
(Krzysztof Wilczyński)
- Remove unused assignments (Krzysztof Wilczyński)
- Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
- Simplify bool comparisons (Krzysztof Wilczyński)
- Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
Miao)
- Simplify return expressions (Qinglang Miao)"
* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
PCI: vmd: Update VMD PM to correctly use generic PCI PM
PCI: vmd: Create IRQ allocation helper
PCI: vmd: Create IRQ Domain configuration helper
PCI: vmd: Create bus offset configuration helper
PCI: vmd: Create physical offset helper
PCI: v3-semi: Remove unneeded break
PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
PCI/ASPM: Remove struct pcie_link_state.l1ss
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
PCI/ASPM: Remove struct aspm_register_info.latency_encoding
PCI/ASPM: Remove struct aspm_register_info.enabled
PCI/ASPM: Remove struct aspm_register_info.support
PCI/ASPM: Use 'parent' and 'child' for readability
PCI/ASPM: Move LTR path check to where it's used
PCI/ASPM: Move pci_clear_and_set_dword() earlier
PCI: dwc: Fix MSI page leakage in suspend/resume
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it, clean up some
non-ACPICA code referring to debug facilities from ACPICA, reduce the
overhead related to accessing GPE registers, add a new DPTF (Dynamic
Power and Thermal Framework) participant driver, update the ACPICA
code in the kernel to upstream revision 20200925, add a new ACPI
backlight whitelist entry, fix a few assorted issues and clean up some
code.
Specifics:
- Add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it (Jonathan Cameron)
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo)
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada)
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki)
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
+ Add predefined names from the SMBus sepcification (Bob Moore)
+ Update acpi_help UUID list (Bob Moore)
+ Return exceptions for string-to-integer conversions in iASL (Bob
Moore)
+ Add a new "ALL <NameSeg>" debugger command (Bob Moore)
+ Add support for 64 bit risc-v compilation (Colin Ian King)
+ Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap)
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung)
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko)
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo)
- Add missing config_item_put() to fix refcount leak (Hanjun Guo)
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo)
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings)
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov)
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao)
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing)
- Serialize tools/power/acpi Makefile (Thomas Renninger)"
* tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPICA: Update version to 20200925 Version 20200925
ACPICA: Remove unnecessary semicolon
ACPICA: Debugger: Add a new command: "ALL <NameSeg>"
ACPICA: iASL: Return exceptions for string-to-integer conversions
ACPICA: acpi_help: Update UUID list
ACPICA: Add predefined names found in the SMBus sepcification
ACPICA: Tree-wide: fix various typos and spelling mistakes
ACPICA: Drop the repeated word "an" in a comment
ACPICA: Add support for 64 bit risc-v compilation
ACPI: button: fix handling lid state changes when input device closed
tools/power/acpi: Serialize Makefile
ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
ACPI / extlog: Check for RDMSR failure
ACPI: Make acpi_evaluate_dsm() prototype consistent
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
...
|
|
Disable parsing of the HMAT for debug, to workaround broken platform
instances, or cases where it is otherwise not wanted.
[rdunlap@infradead.org: fix build when CONFIG_ACPI is not set]
Link: https://lkml.kernel.org/r/70e5ee34-9809-a997-7b49-499e4be61307@infradead.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Hulk Robot <hulkci@huawei.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: https://lkml.kernel.org/r/159643095540.4062302.732962081968036212.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "device-dax: Support sub-dividing soft-reserved ranges", v5.
The device-dax facility allows an address range to be directly mapped
through a chardev, or optionally hotplugged to the core kernel page
allocator as System-RAM. It is the mechanism for converting persistent
memory (pmem) to be used as another volatile memory pool i.e. the current
Memory Tiering hot topic on linux-mm.
In the case of pmem the nvdimm-namespace-label mechanism can sub-divide
it, but that labeling mechanism is not available / applicable to
soft-reserved ("EFI specific purpose") memory [3]. This series provides a
sysfs-mechanism for the daxctl utility to enable provisioning of
volatile-soft-reserved memory ranges.
The motivations for this facility are:
1/ Allow performance differentiated memory ranges to be split between
kernel-managed and directly-accessed use cases.
2/ Allow physical memory to be provisioned along performance relevant
address boundaries. For example, divide a memory-side cache [4] along
cache-color boundaries.
3/ Parcel out soft-reserved memory to VMs using device-dax as a security
/ permissions boundary [5]. Specifically I have seen people (ab)using
memmap=nn!ss (mark System-RAM as Persistent Memory) just to get the
device-dax interface on custom address ranges. A follow-on for the VM
use case is to teach device-dax to dynamically allocate 'struct page' at
runtime to reduce the duplication of 'struct page' space in both the
guest and the host kernel for the same physical pages.
[2]: http://lore.kernel.org/r/20200713160837.13774-11-joao.m.martins@oracle.com
[3]: http://lore.kernel.org/r/157309097008.1579826.12818463304589384434.stgit@dwillia2-desk3.amr.corp.intel.com
[4]: http://lore.kernel.org/r/154899811738.3165233.12325692939590944259.stgit@dwillia2-desk3.amr.corp.intel.com
[5]: http://lore.kernel.org/r/20200110190313.17144-1-joao.m.martins@oracle.com
This patch (of 23):
In preparation for adding a new numa= option clean up the existing ones to
avoid ifdefs in numa_setup(), and provide feedback when the option is
numa=fake= option is invalid due to kernel config. The same does not need
to be done for numa=noacpi, since the capability is already hard disabled
at compile-time.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Hulk Robot <hulkci@huawei.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: https://lkml.kernel.org/r/160106109960.30709.7379926726669669398.stgit@dwillia2-desk3.amr.corp.intel.com
Link: https://lkml.kernel.org/r/159643094279.4062302.17779410714418721328.stgit@dwillia2-desk3.amr.corp.intel.com
Link: https://lkml.kernel.org/r/159643094925.4062302.14979872973043772305.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* acpi-numa:
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
ACPI: Support Generic Initiator only domains
ACPI / NUMA: Add stub function for pxm_to_node()
irq-chip/gic-v3-its: Fix crash if ITS is in a proximity domain without processor or memory
ACPI: Remove side effect of partly creating a node in acpi_get_node()
ACPI: Rename acpi_map_pxm_to_online_node() to pxm_to_online_node()
ACPI: Remove side effect of partly creating a node in acpi_map_pxm_to_online_node()
ACPI: Do not create new NUMA domains from ACPI static tables that are not SRAT
ACPI: Add out of bounds and numa_off protections to pxm_to_node()
|
|
* acpi-video:
ACPI: video: use ACPI backlight for HP 635 Notebook
* acpi-battery:
ACPI: battery: include linux/power_supply.h
* acpi-config:
ACPI: configfs: Add missing config_item_put() to fix refcount leak
* acpi-scan:
ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
|
|
|
|
ACPICA commit 70add34a9a4729b5496d0695ad14d6a1dc435879
Link: https://github.com/acpica/acpica/commit/70add34a
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This allows iASL to generate errors by passing exceptions that may be
encountered during string-to-integer conversions. The exceptions
point out invalid hex, decimal, and octal integers.
ACPICA commit e98b8c0a3d96fdabb167c0ef18a809b32ade3228
Link: https://github.com/acpica/acpica/commit/e98b8c0a
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Added the following UUID's
Memory Device
Generic Buttons Device
NVDIMM Root Device
Control Method Battery
Device Graphs for _DSD method
Hierarchical Data Extension
ARM core_sight Graph UUID
This commit squashes the following ACPICA commits:
93e9aa864a7c5e10db876a9af3f2086e50cc6cf5
759aaf73942af4a1a0d13715ce5e6b054af351fa
24751ce4cf3089a7c1709e4986bc82dfb5cca7bc
Link: https://github.com/acpica/acpica/commit/93e9aa86
Link: https://github.com/acpica/acpica/commit/759aaf73
Link: https://github.com/acpica/acpica/commit/24751ce4
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 6648a6ac8410813bcfedb5c8345259dd155ea851
Fix spelling issues found using the codespell checker
Link: https://github.com/acpica/acpica/commit/6648a6ac
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 9ed2c006444d1def55bc6f08164ed5d9e809c856
Link: https://github.com/acpica/acpica/commit/9ed2c006
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 0def627be286620c64a5d4d60ce2373f119169a9
Add 64 bit risc-v architecture. Useful for acpica tools and
incorporating ACPICA into the Firmware Test Suite.
Link: https://github.com/acpica/acpica/commit/0def627b
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After commit 01feba590cd6 ("ACPI: Do not create new NUMA domains from
ACPI static tables that are not SRAT"):
$ scripts/config --file arch/x86/configs/x86_64_defconfig -d NUMA -e ACPI_NFIT
$ make -skj"$(nproc)" distclean defconfig drivers/acpi/nfit/
drivers/acpi/nfit/core.c: In function ‘acpi_nfit_register_region’:
drivers/acpi/nfit/core.c:3010:27: error: implicit declaration of
function ‘pxm_to_node’; did you mean ‘xa_to_node’?
[-Werror=implicit-function-declaration]
3010 | ndr_desc->target_node = pxm_to_node(spa->proximity_domain);
| ^~~~~~~~~~~
| xa_to_node
cc1: some warnings being treated as errors
...
Add a stub function like acpi_map_pxm_to_node() had so that the build
continues to work.
Fixes: 01feba590cd6 ("ACPI: Do not create new NUMA domains from ACPI static tables that are not SRAT")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi/battery.h uses 'struct power_supply *', but fails to
include/create any declaration of the type. Include linux/
power_supply.h to fix that.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
CPER records describing a firmware-first error are identified by GUID.
The ghes driver currently logs, but ignores any unknown CPER records.
This prevents describing errors that can't be represented by a standard
entry, that would otherwise allow a driver to recover from an error.
The UEFI spec calls these 'Non-standard Section Body' (N.2.3 of
version 2.8).
Add a notifier chain for these non-standard/vendor-records. Callers
must identify their type of records by GUID.
Record data is copied to memory from the ghes_estatus_pool to allow
us to keep it until after the notifier has run.
Co-developed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200903123456.1823-2-shiju.jose@huawei.com
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
|
