| Age | Commit message (Collapse) | Author |
|---|
|
The mm_struct contains a function pointer *get_unmapped_area(), which is
set to either arch_get_unmapped_area() or arch_get_unmapped_area_topdown()
during the initialization of the mm.
Since the function pointer only ever points to two functions that are
named the same across all arch's, a function pointer is not really
required. In addition future changes will want to add versions of the
functions that take additional arguments. So to save a pointers worth of
bytes in mm_struct, and prevent adding additional function pointers to
mm_struct in future changes, remove it and keep the information about
which get_unmapped_area() to use in a flag.
Add the new flag to MMF_INIT_MASK so it doesn't get clobbered on fork by
mmf_init_flags(). Most MM flags get clobbered on fork. In the
pre-existing behavior mm->get_unmapped_area() would get copied to the new
mm in dup_mm(), so not clobbering the flag preserves the existing behavior
around inheriting the topdown-ness.
Introduce a helper, mm_get_unmapped_area(), to easily convert code that
refers to the old function pointer to instead select and call either
arch_get_unmapped_area() or arch_get_unmapped_area_topdown() based on the
flag. Then drop the mm->get_unmapped_area() function pointer. Leave the
get_unmapped_area() pointer in struct file_operations alone. The main
purpose of this change is to reorganize in preparation for future changes,
but it also converts the calls of mm->get_unmapped_area() from indirect
branches into a direct ones.
The stress-ng bigheap benchmark calls realloc a lot, which calls through
get_unmapped_area() in the kernel. On x86, the change yielded a ~1%
improvement there on a retpoline config.
In testing a few x86 configs, removing the pointer unfortunately didn't
result in any actual size reductions in the compiled layout of mm_struct.
But depending on compiler or arch alignment requirements, the change could
shrink the size of mm_struct.
Link: https://lkml.kernel.org/r/20240326021656.202649-3-rick.p.edgecombe@intel.com
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Cover a guard gap corner case", v4.
In working on x86’s shadow stack feature, I came across some limitations
around the kernel’s handling of guard gaps. AFAICT these limitations
are not too important for the traditional stack usage of guard gaps, but
have bigger impact on shadow stack’s usage. And now in addition to x86,
we have two other architectures implementing shadow stack like features
that plan to use guard gaps. I wanted to see about addressing them, but I
have not worked on mmap() placement related code before, so would greatly
appreciate if people could take a look and point me in the right
direction.
The nature of the limitations of concern is as follows. In order to ensure
guard gaps between mappings, mmap() would need to consider two things:
1. That the new mapping isn’t placed in an any existing mapping’s guard
gap.
2. That the new mapping isn’t placed such that any existing mappings are
not in *its* guard gaps
Currently mmap never considers (2), and (1) is not considered in some
situations.
When not passing an address hint, or passing one without
MAP_FIXED_NOREPLACE, (1) is enforced. With MAP_FIXED_NOREPLACE, (1) is
not enforced. With MAP_FIXED, (1) is not considered, but this seems to be
expected since MAP_FIXED can already clobber existing mappings. For
MAP_FIXED_NOREPLACE I would have guessed it should respect the guard gaps
of existing mappings, but it is probably a little ambiguous.
In this series I just tried to add enforcement of (2) for the normal (no
address hint) case and only for the newer shadow stack memory (not
stacks). The reason is that with the no-address-hint situation, landing
next to a guard gap could come up naturally and so be more influencable by
attackers such that two shadow stacks could be adjacent without a guard
gap. Where as the address-hint scenarios would require more control -
being able to call mmap() with specific arguments. As for why not just
fix the other corner cases anyway, I thought it might have some greater
possibility of affecting existing apps.
This patch (of 14):
Future changes will perform a treewide change to remove the indirect
branch that is involved in calling mm->get_unmapped_area(). After doing
this, the function will no longer be able to be handled as a function
pointer. To make the treewide change diff cleaner and easier to review,
refactor pde_get_unmapped_area() such that mm->get_unmapped_area() is
called without being stored in a local function pointer. With this in
refactoring, follow on changes will be able to simply replace the call
site with a future function that calls it directly.
Link: https://lkml.kernel.org/r/20240326021656.202649-1-rick.p.edgecombe@intel.com
Link: https://lkml.kernel.org/r/20240326021656.202649-2-rick.p.edgecombe@intel.com
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Misc features, cleanups, and fixes for vfs and individual filesystems.
Features:
- Support idmapped mounts for hugetlbfs.
- Add RWF_NOAPPEND flag for pwritev2(). This allows us to fix a bug
where the passed offset is ignored if the file is O_APPEND. The new
flag allows a caller to enforce that the offset is honored to
conform to posix even if the file was opened in append mode.
- Move i_mmap_rwsem in struct address_space to avoid false sharing
between i_mmap and i_mmap_rwsem.
- Convert efs, qnx4, and coda to use the new mount api.
- Add a generic is_dot_dotdot() helper that's used by various
filesystems and the VFS code instead of open-coding it multiple
times.
- Recently we've added stable offsets which allows stable ordering
when iterating directories exported through NFS on e.g., tmpfs
filesystems. Originally an xarray was used for the offset map but
that caused slab fragmentation issues over time. This switches the
offset map to the maple tree which has a dense mode that handles
this scenario a lot better. Includes tests.
- Finally merge the case-insensitive improvement series Gabriel has
been working on for a long time. This cleanly propagates case
insensitive operations through ->s_d_op which in turn allows us to
remove the quite ugly generic_set_encrypted_ci_d_ops() operations.
It also improves performance by trying a case-sensitive comparison
first and then fallback to case-insensitive lookup if that fails.
This also fixes a bug where overlayfs would be able to be mounted
over a case insensitive directory which would lead to all sort of
odd behaviors.
Cleanups:
- Make file_dentry() a simple accessor now that ->d_real() is
simplified because of the backing file work we did the last two
cycles.
- Use the dedicated file_mnt_idmap helper in ntfs3.
- Use smp_load_acquire/store_release() in the i_size_read/write
helpers and thus remove the hack to handle i_size reads in the
filemap code.
- The SLAB_MEM_SPREAD is a nop now. Remove it from various places in
fs/
- It's no longer necessary to perform a second built-in initramfs
unpack call because we retain the contents of the previous
extraction. Remove it.
- Now that we have removed various allocators kfree_rcu() always
works with kmem caches and kmalloc(). So simplify various places
that only use an rcu callback in order to handle the kmem cache
case.
- Convert the pipe code to use a lockdep comparison function instead
of open-coding the nesting making lockdep validation easier.
- Move code into fs-writeback.c that was located in a header but can
be made static as it's only used in that one file.
- Rewrite the alignment checking iterators for iovec and bvec to be
easier to read, and also significantly more compact in terms of
generated code. This saves 270 bytes of text on x86-64 (with
clang-18) and 224 bytes on arm64 (with gcc-13). In profiles it also
saves a bit of time for the same workload.
- Switch various places to use KMEM_CACHE instead of
kmem_cache_create().
- Use inode_set_ctime_to_ts() in inode_set_ctime_current()
- Use kzalloc() in name_to_handle_at() to avoid kernel infoleak.
- Various smaller cleanups for eventfds.
Fixes:
- Fix various comments and typos, and unneeded initializations.
- Fix stack allocation hack for clang in the select code.
- Improve dump_mapping() debug code on a best-effort basis.
- Fix build errors in various selftests.
- Avoid wrap-around instrumentation in various places.
- Don't allow user namespaces without an idmapping to be used for
idmapped mounts.
- Fix sysv sb_read() call.
- Fix fallback implementation of the get_name() export operation"
* tag 'vfs-6.9.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (70 commits)
hugetlbfs: support idmapped mounts
qnx4: convert qnx4 to use the new mount api
fs: use inode_set_ctime_to_ts to set inode ctime to current time
libfs: Drop generic_set_encrypted_ci_d_ops
ubifs: Configure dentry operations at dentry-creation time
f2fs: Configure dentry operations at dentry-creation time
ext4: Configure dentry operations at dentry-creation time
libfs: Add helper to choose dentry operations at mount-time
libfs: Merge encrypted_ci_dentry_ops and ci_dentry_ops
fscrypt: Drop d_revalidate once the key is added
fscrypt: Drop d_revalidate for valid dentries during lookup
fscrypt: Factor out a helper to configure the lookup dentry
ovl: Always reject mounting over case-insensitive directories
libfs: Attempt exact-match comparison first during casefolded lookup
efs: remove SLAB_MEM_SPREAD flag usage
jfs: remove SLAB_MEM_SPREAD flag usage
minix: remove SLAB_MEM_SPREAD flag usage
openpromfs: remove SLAB_MEM_SPREAD flag usage
proc: remove SLAB_MEM_SPREAD flag usage
qnx6: remove SLAB_MEM_SPREAD flag usage
...
|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1 (see [1]), so it became a dead flag since the
commit 16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"). And
the series[1] went on to mark it obsolete explicitly to avoid confusion
for users. Here we can just remove all its users, which has no any
functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz [1]
Link: https://lore.kernel.org/r/20240224135048.829987-1-chengming.zhou@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
that keeps both around until struct inode is freed, making access
to them safe from rcu-pathwalk
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
|
|
Use while loop instead of infinite loop with "break;".
Also move some variable to the inner scope where they belong.
Link: https://lkml.kernel.org/r/82c8f8e7-8ded-46ca-8857-e60b991d6205@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert to using the new inode timestamp accessor functions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-59-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-65-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use copy_splice_read() for tty, procfs, kernfs and random files rather
than going through generic_file_splice_read() as they just copy the file
into the output buffer and don't splice pages. This avoids the need for
them to have a ->read_folio() to satisfy filemap_splice_read().
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Christoph Hellwig <hch@lst.de>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: John Hubbard <jhubbard@nvidia.com>
cc: David Hildenbrand <david@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Miklos Szeredi <miklos@szeredi.hu>
cc: Arnd Bergmann <arnd@arndb.de>
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-13-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Easily done now, just by clearing FMODE_LSEEK in ->f_mode
during proc_reg_open() for such entries.
Fixes: 868941b14441 "fs: remove no_llseek"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* /proc/${pid}/net status
* removing PDE vs last close stuff (again!)
* random small stuff
Link: https://lkml.kernel.org/r/YtwrM6sDC0OQ53YB@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Those aren't necessary after seq files won.
Link: https://lkml.kernel.org/r/YqnA3mS7KBt8Z4If@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The inode allocation is supposed to use alloc_inode_sb(), so convert
kmem_cache_alloc() of all filesystems to alloc_inode_sb().
Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Theodore Ts'o <tytso@mit.edu> [ext4]
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
PDE_DATA(inode) is introduced to get user private data and hide the
layout of struct proc_dir_entry. The inode->i_private is used to do the
same thing as well. Save a copy of user private data to inode->
i_private when proc inode is allocated. This means the user also can
get their private data by inode->i_private.
Introduce pde_data() to wrap inode->i_private so that we can remove
PDE_DATA() from fs/proc/generic.c and make PTE_DATE() as a wrapper of
pde_data(). It will be easier if we decide to remove PDE_DATE() in the
future.
Link: https://lkml.kernel.org/r/20211124081956.87711-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Two checks in lookup and readdir code should be enough to not have third
check in open code.
Can't open what can't be looked up?
Link: https://lkml.kernel.org/r/YFYYwIBIkytqnkxP@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that proc_ops are separate from file_operations and other operations
it easy to check all instances to have ->proc_lseek hook and remove check
in main code.
Note:
nonseekable_open() files naturally don't require ->proc_lseek.
Garbage collect pde_lseek() function.
[adobriyan@gmail.com: smoke test lseek()]
Link: https://lkml.kernel.org/r/YG4OIhChOrVTPgdN@localhost.localdomain
Link: https://lkml.kernel.org/r/YFYX0Bzwxlc7aBa/@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Wire up generic_file_splice_read for the iter based proxy ops, so
that splice reads from them work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This will allow proc files to implement iter read semantics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Instead of providing a special no-compat version provide a special
compat version for operations with ->compat_ioctl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Just return early on inode allocation failure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Recently syzbot reported that unmounting proc when there is an ongoing
inotify watch on the root directory of proc could result in a use
after free when the watch is removed after the unmount of proc
when the watcher exits.
Commit 69879c01a0c3 ("proc: Remove the now unnecessary internal mount
of proc") made it easier to unmount proc and allowed syzbot to see the
problem, but looking at the code it has been around for a long time.
Looking at the code the fsnotify watch should have been removed by
fsnotify_sb_delete in generic_shutdown_super. Unfortunately the inode
was allocated with new_inode_pseudo instead of new_inode so the inode
was not on the sb->s_inodes list. Which prevented
fsnotify_unmount_inodes from finding the inode and removing the watch
as well as made it so the "VFS: Busy inodes after unmount" warning
could not find the inodes to warn about them.
Make all of the inodes in proc visible to generic_shutdown_super,
and fsnotify_sb_delete by using new_inode instead of new_inode_pseudo.
The only functional difference is that new_inode places the inodes
on the sb->s_inodes list.
I wrote a small test program and I can verify that without changes it
can trigger this issue, and by replacing new_inode_pseudo with
new_inode the issues goes away.
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/000000000000d788c905a7dfa3f4@google.com
Reported-by: syzbot+7d2debdcdb3cb93c1e5e@syzkaller.appspotmail.com
Fixes: 0097875bd415 ("proc: Implement /proc/thread-self to point at the directory of the current thread")
Fixes: 021ada7dff22 ("procfs: switch /proc/self away from proc_dir_entry")
Fixes: 51f0885e5415 ("vfs,proc: guarantee unique inodes in /proc")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
The hidepid parameter values are becoming more and more and it becomes
difficult to remember what each new magic number means.
Backward compatibility is preserved since it is possible to specify
numerical value for the hidepid parameter. This does not break the
fsconfig since it is not possible to specify a numerical value through
it. All numeric values are converted to a string. The type
FSCONFIG_SET_BINARY cannot be used to indicate a numerical value.
Selftest has been added to verify this behavior.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
This allows to hide all files and directories in the procfs that are not
related to tasks.
Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
This patch allows to have multiple procfs instances inside the
same pid namespace. The aim here is lightweight sandboxes, and to allow
that we have to modernize procfs internals.
1) The main aim of this work is to have on embedded systems one
supervisor for apps. Right now we have some lightweight sandbox support,
however if we create pid namespacess we have to manages all the
processes inside too, where our goal is to be able to run a bunch of
apps each one inside its own mount namespace without being able to
notice each other. We only want to use mount namespaces, and we want
procfs to behave more like a real mount point.
2) Linux Security Modules have multiple ptrace paths inside some
subsystems, however inside procfs, the implementation does not guarantee
that the ptrace() check which triggers the security_ptrace_check() hook
will always run. We have the 'hidepid' mount option that can be used to
force the ptrace_may_access() check inside has_pid_permissions() to run.
The problem is that 'hidepid' is per pid namespace and not attached to
the mount point, any remount or modification of 'hidepid' will propagate
to all other procfs mounts.
This also does not allow to support Yama LSM easily in desktop and user
sessions. Yama ptrace scope which restricts ptrace and some other
syscalls to be allowed only on inferiors, can be updated to have a
per-task context, where the context will be inherited during fork(),
clone() and preserved across execve(). If we support multiple private
procfs instances, then we may force the ptrace_may_access() on
/proc/<pids>/ to always run inside that new procfs instances. This will
allow to specifiy on user sessions if we should populate procfs with
pids that the user can ptrace or not.
By using Yama ptrace scope, some restricted users will only be able to see
inferiors inside /proc, they won't even be able to see their other
processes. Some software like Chromium, Firefox's crash handler, Wine
and others are already using Yama to restrict which processes can be
ptracable. With this change this will give the possibility to restrict
/proc/<pids>/ but more importantly this will give desktop users a
generic and usuable way to specifiy which users should see all processes
and which users can not.
Side notes:
* This covers the lack of seccomp where it is not able to parse
arguments, it is easy to install a seccomp filter on direct syscalls
that operate on pids, however /proc/<pid>/ is a Linux ABI using
filesystem syscalls. With this change LSMs should be able to analyze
open/read/write/close...
In the new patch set version I removed the 'newinstance' option
as suggested by Eric W. Biederman.
Selftest has been added to verify new behavior.
Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Now that "struct proc_ops" exist we can start putting there stuff which
could not fly with VFS "struct file_operations"...
Most of fs/proc/inode.c file is dedicated to make open/read/.../close
reliable in the event of disappearing /proc entries which usually happens
if module is getting removed. Files like /proc/cpuinfo which never
disappear simply do not need such protection.
Save 2 atomic ops, 1 allocation, 1 free per open/read/close sequence for such
"permanent" files.
Enable "permanent" flag for
/proc/cpuinfo
/proc/kmsg
/proc/modules
/proc/slabinfo
/proc/stat
/proc/sysvipc/*
/proc/swaps
More will come once I figure out foolproof way to prevent out module
authors from marking their stuff "permanent" for performance reasons
when it is not.
This should help with scalability: benchmark is "read /proc/cpuinfo R times
by N threads scattered over the system".
N R t, s (before) t, s (after)
-----------------------------------------------------
64 4096 1.582458 1.530502 -3.2%
256 4096 6.371926 6.125168 -3.9%
1024 4096 25.64888 24.47528 -4.6%
Benchmark source:
#include <chrono>
#include <iostream>
#include <thread>
#include <vector>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
const int NR_CPUS = sysconf(_SC_NPROCESSORS_ONLN);
int N;
const char *filename;
int R;
int xxx = 0;
int glue(int n)
{
cpu_set_t m;
CPU_ZERO(&m);
CPU_SET(n, &m);
return sched_setaffinity(0, sizeof(cpu_set_t), &m);
}
void f(int n)
{
glue(n % NR_CPUS);
while (*(volatile int *)&xxx == 0) {
}
for (int i = 0; i < R; i++) {
int fd = open(filename, O_RDONLY);
char buf[4096];
ssize_t rv = read(fd, buf, sizeof(buf));
asm volatile ("" :: "g" (rv));
close(fd);
}
}
int main(int argc, char *argv[])
{
if (argc < 4) {
std::cerr << "usage: " << argv[0] << ' ' << "N /proc/filename R
";
return 1;
}
N = atoi(argv[1]);
filename = argv[2];
R = atoi(argv[3]);
for (int i = 0; i < NR_CPUS; i++) {
if (glue(i) == 0)
break;
}
std::vector<std::thread> T;
T.reserve(N);
for (int i = 0; i < N; i++) {
T.emplace_back(f, i);
}
auto t0 = std::chrono::system_clock::now();
{
*(volatile int *)&xxx = 1;
for (auto& t: T) {
t.join();
}
}
auto t1 = std::chrono::system_clock::now();
std::chrono::duration<double> dt = t1 - t0;
std::cout << dt.count() << '
';
return 0;
}
P.S.:
Explicit randomization marker is added because adding non-function pointer
will silently disable structure layout randomization.
[akpm@linux-foundation.org: coding style fixes]
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200222201539.GA22576@avx2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix sparse locking imbalance warning:
warning: context imbalance in close_pdeo() - unexpected unlock
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200227201538.GA30462@avx2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rework the flushing of proc to use a list of directory inodes that
need to be flushed.
The list is kept on struct pid not on struct task_struct, as there is
a fixed connection between proc inodes and pids but at least for the
case of de_thread the pid of a task_struct changes.
This removes the dependency on proc_mnt which allows for different
mounts of proc having different mount options even in the same pid
namespace and this allows for the removal of proc_mnt which will
trivially the first mount of proc to honor it's mount options.
This flushing remains an optimization. The functions
pid_delete_dentry and pid_revalidate ensure that ordinary dcache
management will not attempt to use dentries past the point their
respective task has died. When unused the shrinker will
eventually be able to remove these dentries.
There is a case in de_thread where proc_flush_pid can be
called early for a given pid. Which winds up being
safe (if suboptimal) as this is just an optiimization.
Only pid directories are put on the list as the other
per pid files are children of those directories and
d_invalidate on the directory will get them as well.
So that the pid can be used during flushing it's reference count is
taken in release_task and dropped in proc_flush_pid. Further the call
of proc_flush_pid is moved after the tasklist_lock is released in
release_task so that it is certain that the pid has already been
unhashed when flushing it taking place. This removes a small race
where a dentry could recreated.
As struct pid is supposed to be small and I need a per pid lock
I reuse the only lock that currently exists in struct pid the
the wait_pidfd.lock.
The net result is that this adds all of this functionality
with just a little extra list management overhead and
a single extra pointer in struct pid.
v2: Initialize pid->inodes. I somehow failed to get that
initialization into the initial version of the patch. A boot
failure was reported by "kernel test robot <lkp@intel.com>", and
failure to initialize that pid->inodes matches all of the reported
symptoms.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
This just keeps everything tidier, and allows for using flags like
SLAB_TYPESAFE_BY_RCU where slabs are not always cleared before reuse.
I don't see reuse without reinitializing happening with the proc_inode
but I had a false alarm while reworking flushing of proc dentries and
indoes when a process dies that caused me to tidy this up.
The code is a little easier to follow and reason about this
way so I figured the changes might as well be kept.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The function d_prune_aliases has the problem that it will only prune
aliases thare are completely unused. It will not remove aliases for
the dcache or even think of removing mounts from the dcache. For that
behavior d_invalidate is needed.
To use d_invalidate replace d_prune_aliases with d_find_alias followed
by d_invalidate and dput.
For completeness the directory and the non-directory cases are
separated because in theory (although not in currently in practice for
proc) directories can only ever have a single dentry while
non-directories can have hardlinks and thus multiple dentries.
As part of this separation use d_find_any_alias for directories
to spare d_find_alias the extra work of doing that.
Plus the differences between d_find_any_alias and d_find_alias makes
it clear why the directory and non-directory code and not share code.
To make it clear these routines now invalidate dentries rename
proc_prune_siblings_dache to proc_invalidate_siblings_dcache, and rename
proc_sys_prune_dcache proc_sys_invalidate_dcache.
V2: Split the directory and non-directory cases. To make this
code robust to future changes in proc.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Because there are likely to be several sysctls in a row on the
same superblock cache the super_block after the count has
been raised and don't deactivate it until we are processing
another super_block.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
This prepares the way for allowing the pid part of proc to use this
dcache pruning code as well.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
I about to need and use the same functionality for pid based
inodes and there is no point in adding a second field when
this field is already here and serving the same purporse.
Just give the field a generic name so it is clear that
it is no longer sysctl specific.
Also for good measure initialize sibling_inodes when
proc_inode is initialized.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Currently core /proc code uses "struct file_operations" for custom hooks,
however, VFS doesn't directly call them. Every time VFS expands
file_operations hook set, /proc code bloats for no reason.
Introduce "struct proc_ops" which contains only those hooks which /proc
allows to call into (open, release, read, write, ioctl, mmap, poll). It
doesn't contain module pointer as well.
Save ~184 bytes per usage:
add/remove: 26/26 grow/shrink: 1/4 up/down: 1922/-6674 (-4752)
Function old new delta
sysvipc_proc_ops - 72 +72
...
config_gz_proc_ops - 72 +72
proc_get_inode 289 339 +50
proc_reg_get_unmapped_area 110 107 -3
close_pdeo 227 224 -3
proc_reg_open 289 284 -5
proc_create_data 60 53 -7
rt_cpu_seq_fops 256 - -256
...
default_affinity_proc_fops 256 - -256
Total: Before=5430095, After=5425343, chg -0.09%
Link: http://lkml.kernel.org/r/20191225172228.GA13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Don't repeat function signatures twice.
This is a kind-of-precursor for "struct proc_ops".
Note:
typeof(pde->proc_fops->...) ...;
can't be used because ->proc_fops is "const struct file_operations *".
"const" prevents assignment down the code and it can't be deleted in the
type system.
Link: http://lkml.kernel.org/r/20190529191110.GB5703@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add fs_context support to procfs.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Move proc_fill_super() to fs/proc/root.c as that's where the other
superblock stuff is.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Link: http://lkml.kernel.org/r/20181203164015.GA6904@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The page cache and most shrinkable slab caches hold data that has been
read from disk, but there are some caches that only cache CPU work, such
as the dentry and inode caches of procfs and sysfs, as well as the subset
of radix tree nodes that track non-resident page cache.
Currently, all these are shrunk at the same rate: using DEFAULT_SEEKS for
the shrinker's seeks setting tells the reclaim algorithm that for every
two page cache pages scanned it should scan one slab object.
This is a bogus setting. A virtual inode that required no IO to create is
not twice as valuable as a page cache page; shadow cache entries with
eviction distances beyond the size of memory aren't either.
In most cases, the behavior in practice is still fine. Such virtual
caches don't tend to grow and assert themselves aggressively, and usually
get picked up before they cause problems. But there are scenarios where
that's not true.
Our database workloads suffer from two of those. For one, their file
workingset is several times bigger than available memory, which has the
kernel aggressively create shadow page cache entries for the non-resident
parts of it. The workingset code does tell the VM that most of these are
expendable, but the VM ends up balancing them 2:1 to cache pages as per
the seeks setting. This is a huge waste of memory.
These workloads also deal with tens of thousands of open files and use
/proc for introspection, which ends up growing the proc_inode_cache to
absurdly large sizes - again at the cost of valuable cache space, which
isn't a reasonable trade-off, given that proc inodes can be re-created
without involving the disk.
This patch implements a "zero-seek" setting for shrinkers that results in
a target ratio of 0:1 between their objects and IO-backed caches. This
allows such virtual caches to grow when memory is available (they do
cache/avoid CPU work after all), but effectively disables them as soon as
IO-backed objects are under pressure.
It then switches the shrinkers for procfs and sysfs metadata, as well as
excess page cache shadow nodes, to the new zero-seek setting.
Link: http://lkml.kernel.org/r/20181009184732.762-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Domas Mituzas <dmituzas@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
24074a35c5c975 ("proc: Make inline name size calculation automatic")
started to put PDE allocations into kmalloc-256 which is unnecessary as
~40 character names are very rare.
Put allocation back into kmalloc-192 cache for 64-bit non-debug builds.
Put BUILD_BUG_ON to know when PDE size has gotten out of control.
[adobriyan@gmail.com: fix BUILD_BUG_ON breakage on powerpc64]
Link: http://lkml.kernel.org/r/20180703191602.GA25521@avx2
Link: http://lkml.kernel.org/r/20180617215732.GA24688@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make calculation of the size of the inline name in struct proc_dir_entry
automatic, rather than having to manually encode the numbers and failing to
allow for lockdep.
Require a minimum inline name size of 33+1 to allow for names that look
like two hex numbers with a dash between.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
"struct proc_dir_entry" is variable sized because of 0-length trailing
array for name, however, because of SLAB padding allocations it is
possible to make "struct proc_dir_entry" fixed sized and allocate same
amount of memory.
It buys fine-grained debugging with poisoning and usercopy protection
which is not possible with kmalloc-* caches.
Currently, on 32-bit 91+ byte allocations go into kmalloc-128 and on
64-bit 147+ byte allocations go to kmalloc-192 anyway.
Additional memory is allocated only for 38/46+ byte long names which are
rare or may not even exist in the wild.
Link: http://lkml.kernel.org/r/20180223205504.GA17139@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The allocation is persistent in fact as any fool can open a file in
/proc and sit on it.
Link: http://lkml.kernel.org/r/20180214082409.GC17157@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
"struct pde_opener" is fixed size and we can have more granular approach
to debugging.
For those who don't know, per cache SLUB poisoning and red zoning don't
work if there is at least one object allocated which is hopeless in case
of kmalloc-64 but not in case of standalone cache. Although systemd
opens 2 files from the get go, so it is hopeless after all.
Link: http://lkml.kernel.org/r/20180214082306.GB17157@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The whole point of code in fs/proc/inode.c is to make sure ->release
hook is called either at close() or at rmmod time.
All if it is unnecessary if there is no ->release hook.
Save allocation+list manipulations under spinlock in that case.
Link: http://lkml.kernel.org/r/20180214063033.GA15579@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit ca469f35a8e9ef ("deal with races between remove_proc_entry() and
proc_reg_release()") moved too much stuff under ->pde_unload_lock making
a problem described at series "[PATCH v5] procfs: Improve Scaling in
proc" worse.
While RCU is being figured out, move kfree() out of ->pde_unload_lock.
On my potato, difference is only 0.5% speedup with concurrent
open+read+close of /proc/cmdline, but the effect should be more
noticeable on more capable machines.
$ perf stat -r 16 -- ./proc-j 16
Performance counter stats for './proc-j 16' (16 runs):
130569.502377 task-clock (msec) # 15.872 CPUs utilized ( +- 0.05% )
19,169 context-switches # 0.147 K/sec ( +- 0.18% )
15 cpu-migrations # 0.000 K/sec ( +- 3.27% )
437 page-faults # 0.003 K/sec ( +- 1.25% )
300,172,097,675 cycles # 2.299 GHz ( +- 0.05% )
96,793,267,308 instructions # 0.32 insn per cycle ( +- 0.04% )
22,798,342,298 branches # 174.607 M/sec ( +- 0.04% )
111,764,687 branch-misses # 0.49% of all branches ( +- 0.47% )
8.226574400 seconds time elapsed ( +- 0.05% )
^^^^^^^^^^^
$ perf stat -r 16 -- ./proc-j 16
Performance counter stats for './proc-j 16' (16 runs):
129866.777392 task-clock (msec) # 15.869 CPUs utilized ( +- 0.04% )
19,154 context-switches # 0.147 K/sec ( +- 0.66% )
14 cpu-migrations # 0.000 K/sec ( +- 1.73% )
431 page-faults # 0.003 K/sec ( +- 1.09% )
298,556,520,546 cycles # 2.299 GHz ( +- 0.04% )
96,525,366,833 instructions # 0.32 insn per cycle ( +- 0.04% )
22,730,194,043 branches # 175.027 M/sec ( +- 0.04% )
111,506,074 branch-misses # 0.49% of all branches ( +- 0.18% )
8.183629778 seconds time elapsed ( +- 0.04% )
^^^^^^^^^^^
Link: http://lkml.kernel.org/r/20180213132911.GA24298@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
use_pde() is used at every open/read/write/... of every random /proc
file. Negative refcount happens only if PDE is being deleted by module
(read: never). So it gets "likely".
unuse_pde() gets "unlikely" for the same reason.
close_pdeo() gets unlikely as the completion is filled only if there is a
race between PDE removal and close() (read: never ever).
It even saves code on x86_64 defconfig:
add/remove: 0/0 grow/shrink: 1/2 up/down: 2/-20 (-18)
Function old new delta
close_pdeo 183 185 +2
proc_reg_get_unmapped_area 119 111 -8
proc_reg_poll 85 73 -12
Link: http://lkml.kernel.org/r/20180104175657.GA5204@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
/proc/self inode numbers, value of proc_inode_cache and st_nlink of
/proc/$TGID are fixed constants.
Link: http://lkml.kernel.org/r/20180103184707.GA31849@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
