summaryrefslogtreecommitdiff
path: root/fs/ocfs2
AgeCommit message (Collapse)Author
2014-12-10ocfs2: remove filesize checks for sync I/O journal commitGoldwyn Rodrigues
Filesize is not a good indication that the file needs to be synced. An example where this breaks is: 1. Open the file in O_SYNC|O_RDWR 2. Read a small portion of the file (say 64 bytes) 3. Lseek to starting of the file 4. Write 64 bytes If the node crashes, it is not written out to disk because this was not committed in the journal and the other node which reads the file after recovery reads stale data (even if the write on the other node was successful) Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10ocfs2: o2net: fix connect expiredJunxiao Bi
Set nn_persistent_error to -ENOTCONN will stop reconnect since the "stop" condition in o2net_start_connect() will be true. stop = (nn->nn_sc || (nn->nn_persistent_error && (nn->nn_persistent_error != -ENOTCONN || timeout == 0))); This will make connection never be established if the first connection request is lost. Set nn_persistent_error to 0 when connect expired to fix this. With this changes, dlm will not be waken up when connect expired, this is OK since dlm depends on network, dlm can do nothing in this case if waken up. Let it wait there for network recover and connect built again to continue. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10ocfs2: o2dlm: fix a race between purge and master querySrinivas Eeda
Node A sends master query request to node B which is the master. At this time lockres happens to be on purgelist. dlm_master_request_handler gets the dlm spinlock, finds the resource and releases the dlm spin lock. Right at this dlm_thread on this node could purge the lockres. dlm_master_request_handler can then acquire lockres spinlock and reply to Node A that node B is the master even though lockres on node B is purged. The above scenario will now make node A falsely think node B is the master which is inconsistent. Further if another node C tries to master the same resource, every node will respond they are not the master. Node C then masters the resource and sends assert master to all nodes. This will now make node A crash with the following message. dlm_assert_master_handler:1831 ERROR: DIE! Mastery assert from 9, but current owner is 10! Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com> Tested-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10ocfs2: report error from o2hb_do_disk_heartbeat() to userJan Kara
Report return value of o2hb_do_disk_heartbeat() as a part of ML_HEARTBEAT message so that we know whether a heartbeat actually happened or not. This also makes assigned but otherwise unused 'ret' variable used. Coverity id: 1227053. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10ocfs2: remove bogus test from ocfs2_read_locked_inode()Jan Kara
'args' are always set for ocfs2_read_locked_inode() and brelse() checks whether bh is NULL. So the test (args && bh) is unnecessary (plus the args part is really confusing anyway). Remove it. Coverity id: 1128856. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10ocfs2: Fix xattr check in ocfs2_get_xattr_nolock()Jan Kara
ocfs2_get_xattr_nolock() checks whether inode has any extended attributes (OCFS2_HAS_XATTR_FL). If not, it just sets 'ret' to -ENODATA but continues with checking inline and external attributes anyway (which is pointless although it does not harm). Just return immediately when we know there are no extended attributes in the inode. Coverity id: 1226906. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10ocfs2: fix an off-by-one BUG_ON() statementDan Carpenter
The ->si_slots[] array is allocated in ocfs2_init_slot_info() it has "->max_slots" number of elements so this test should be >= instead of >. Static checker work. Compile tested only. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10ocfs2/dlm: let sender retry if dlm_dispatch_assert_master failed with -ENOMEMJoseph Qi
Do not BUG() if GFP_ATOMIC allocation fails in dlm_dispatch_assert_master. Instead, return -ENOMEM to the sender and then retry. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Alex Chen <alex.chen@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS changes from Al Viro: "First pile out of several (there _definitely_ will be more). Stuff in this one: - unification of d_splice_alias()/d_materialize_unique() - iov_iter rewrite - killing a bunch of ->f_path.dentry users (and f_dentry macro). Getting that completed will make life much simpler for unionmount/overlayfs, since then we'll be able to limit the places sensitive to file _dentry_ to reasonably few. Which allows to have file_inode(file) pointing to inode in a covered layer, with dentry pointing to (negative) dentry in union one. Still not complete, but much closer now. - crapectomy in lustre (dead code removal, mostly) - "let's make seq_printf return nothing" preparations - assorted cleanups and fixes There _definitely_ will be more piles" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) copy_from_iter_nocache() new helper: iov_iter_kvec() csum_and_copy_..._iter() iov_iter.c: handle ITER_KVEC directly iov_iter.c: convert copy_to_iter() to iterate_and_advance iov_iter.c: convert copy_from_iter() to iterate_and_advance iov_iter.c: get rid of bvec_copy_page_{to,from}_iter() iov_iter.c: convert iov_iter_zero() to iterate_and_advance iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds iov_iter.c: convert iov_iter_npages() to iterate_all_kinds iov_iter.c: iterate_and_advance iov_iter.c: macros for iterating over iov_iter kill f_dentry macro dcache: fix kmemcheck warning in switch_names new helper: audit_file() nfsd_vfs_write(): use file_inode() ncpfs: use file_inode() kill f_dentry uses lockd: get rid of ->f_path.dentry->d_sb ...
2014-12-10Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota updates from Jan Kara: "Quota improvements and some minor cleanups. The main portion in the pull request are changes which move i_dquot array from struct inode into fs-private part of an inode which saves memory for filesystems which don't use VFS quotas" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: One function call less in udf_fill_super() after error detection udf: Deletion of unnecessary checks before the function call "iput" jbd: Deletion of an unnecessary check before the function call "iput" vfs: Remove i_dquot field from inode jfs: Convert to private i_dquot field reiserfs: Convert to private i_dquot field ocfs2: Convert to private i_dquot field ext4: Convert to private i_dquot field ext3: Convert to private i_dquot field ext2: Convert to private i_dquot field quota: Use function to provide i_dquot pointers xfs: Set allowed quota types gfs2: Set allowed quota types quota: Allow each filesystem to specify which quota types it supports quota: Remove const from function declarations quota: Add log level to printk
2014-12-08Merge branch 'iov_iter' into for-nextAl Viro
2014-11-19assorted conversions to %p[dD]Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-10ocfs2: Convert to private i_dquot fieldJan Kara
CC: Mark Fasheh <mfasheh@suse.com> CC: Joel Becker <jlbec@evilplan.org> CC: ocfs2-devel@oss.oracle.com Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2014-11-05fix breakage in o2net_send_tcp_msg()Al Viro
uninitialized msghdr. Broken in "ocfs2: don't open-code kernel_recvmsg()" by me ;-/ Cc: stable@vger.kernel.org # 3.15+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-03move d_rcu from overlapping d_child to overlapping d_aliasAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-31vfs: make first argument of dir_context.actor typedMiklos Szeredi
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-29ocfs2: fix d_splice_alias() return code checkingRichard Weinberger
d_splice_alias() can return a valid dentry, NULL or an ERR_PTR. Currently the code checks not for ERR_PTR and will cuase an oops in ocfs2_dentry_attach_lock(). Fix this by using IS_ERR_OR_NULL(). Signed-off-by: Richard Weinberger <richard@nod.at> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14ocfs2: replace strnicmp with strncasecmpRasmus Villemoes
The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-11Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF and quota updates from Jan Kara: "A few UDF fixes and also a few patches which are preparing filesystems for support of project quotas in VFS" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fix loading of special inodes ocfs2: Back out change to use OCFS2_MAXQUOTAS in ocfs2_setattr() udf: remove redundant sys_tz declaration ocfs2: Don't use MAXQUOTAS value reiserfs: Don't use MAXQUOTAS value ext3: Don't use MAXQUOTAS value udf: Fix race between write(2) and close(2)
2014-10-09ocfs2: fix a deadlock while o2net_wq doing direct memory reclaimXue jiufei
Fix a deadlock problem caused by direct memory reclaim in o2net_wq. The situation is as follows: 1) Receive a connect message from another node, node queues a work_struct o2net_listen_work. 2) o2net_wq processes this work and call the following functions: o2net_wq -> o2net_accept_one -> sock_create_lite -> sock_alloc() -> kmem_cache_alloc with GFP_KERNEL -> ____cache_alloc_node ->__alloc_pages_nodemask -> do_try_to_free_pages -> shrink_slab -> evict -> ocfs2_evict_inode -> ocfs2_drop_lock -> dlmunlock -> o2net_send_message_vec then o2net_wq wait for the unlock reply from master. 3) tcp layer received the reply, call o2net_data_ready() and queue sc_rx_work, waiting o2net_wq to process this work. 4) o2net_wq is a single thread workqueue, it process the work one by one. Right now it is still doing o2net_listen_work and cannot handle sc_rx_work. so we deadlock. Junxiao Bi's patch "mm: clear __GFP_FS when PF_MEMALLOC_NOIO is set" (http://ozlabs.org/~akpm/mmots/broken-out/mm-clear-__gfp_fs-when-pf_memalloc_noio-is-set.patch) clears __GFP_FS in memalloc_noio_flags() besides __GFP_IO. We use memalloc_noio_save() to set process flag PF_MEMALLOC_NOIO so that all allocations done by this process are done as if GFP_NOIO was specified. We are not reentering filesystem while doing memory reclaim. Signed-off-by: joyce.xue <xuejiufei@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09ocfs2: fix deadlock due to wrong locking orderJunxiao Bi
For commit ocfs2 journal, ocfs2 journal thread will acquire the mutex osb->journal->j_trans_barrier and wake up jbd2 commit thread, then it will wait until jbd2 commit thread done. In order journal mode, jbd2 needs flushing dirty data pages first, and this needs get page lock. So osb->journal->j_trans_barrier should be got before page lock. But ocfs2_write_zero_page() and ocfs2_write_begin_inline() obey this locking order, and this will cause deadlock and hung the whole cluster. One deadlock catched is the following: PID: 13449 TASK: ffff8802e2f08180 CPU: 31 COMMAND: "oracle" #0 [ffff8802ee3f79b0] __schedule at ffffffff8150a524 #1 [ffff8802ee3f7a58] schedule at ffffffff8150acbf #2 [ffff8802ee3f7a68] rwsem_down_failed_common at ffffffff8150cb85 #3 [ffff8802ee3f7ad8] rwsem_down_read_failed at ffffffff8150cc55 #4 [ffff8802ee3f7ae8] call_rwsem_down_read_failed at ffffffff812617a4 #5 [ffff8802ee3f7b50] ocfs2_start_trans at ffffffffa0498919 [ocfs2] #6 [ffff8802ee3f7ba0] ocfs2_zero_start_ordered_transaction at ffffffffa048b2b8 [ocfs2] #7 [ffff8802ee3f7bf0] ocfs2_write_zero_page at ffffffffa048e9bd [ocfs2] #8 [ffff8802ee3f7c80] ocfs2_zero_extend_range at ffffffffa048ec83 [ocfs2] #9 [ffff8802ee3f7ce0] ocfs2_zero_extend at ffffffffa048edfd [ocfs2] #10 [ffff8802ee3f7d50] ocfs2_extend_file at ffffffffa049079e [ocfs2] #11 [ffff8802ee3f7da0] ocfs2_setattr at ffffffffa04910ed [ocfs2] #12 [ffff8802ee3f7e70] notify_change at ffffffff81187d29 #13 [ffff8802ee3f7ee0] do_truncate at ffffffff8116bbc1 #14 [ffff8802ee3f7f50] sys_ftruncate at ffffffff8116bcbd #15 [ffff8802ee3f7f80] system_call_fastpath at ffffffff81515142 RIP: 00007f8de750c6f7 RSP: 00007fffe786e478 RFLAGS: 00000206 RAX: 000000000000004d RBX: ffffffff81515142 RCX: 0000000000000000 RDX: 0000000000000200 RSI: 0000000000028400 RDI: 000000000000000d RBP: 00007fffe786e040 R8: 0000000000000000 R9: 000000000000000d R10: 0000000000000000 R11: 0000000000000206 R12: 000000000000000d R13: 00007fffe786e710 R14: 00007f8de70f8340 R15: 0000000000028400 ORIG_RAX: 000000000000004d CS: 0033 SS: 002b crash64> bt PID: 7610 TASK: ffff88100fd56140 CPU: 1 COMMAND: "ocfs2cmt" #0 [ffff88100f4d1c50] __schedule at ffffffff8150a524 #1 [ffff88100f4d1cf8] schedule at ffffffff8150acbf #2 [ffff88100f4d1d08] jbd2_log_wait_commit at ffffffffa01274fd [jbd2] #3 [ffff88100f4d1d98] jbd2_journal_flush at ffffffffa01280b4 [jbd2] #4 [ffff88100f4d1dd8] ocfs2_commit_cache at ffffffffa0499b14 [ocfs2] #5 [ffff88100f4d1e38] ocfs2_commit_thread at ffffffffa0499d38 [ocfs2] #6 [ffff88100f4d1ee8] kthread at ffffffff81090db6 #7 [ffff88100f4d1f48] kernel_thread_helper at ffffffff81516284 crash64> bt PID: 7609 TASK: ffff88100f2d4480 CPU: 0 COMMAND: "jbd2/dm-20-86" #0 [ffff88100def3920] __schedule at ffffffff8150a524 #1 [ffff88100def39c8] schedule at ffffffff8150acbf #2 [ffff88100def39d8] io_schedule at ffffffff8150ad6c #3 [ffff88100def39f8] sleep_on_page at ffffffff8111069e #4 [ffff88100def3a08] __wait_on_bit_lock at ffffffff8150b30a #5 [ffff88100def3a58] __lock_page at ffffffff81110687 #6 [ffff88100def3ab8] write_cache_pages at ffffffff8111b752 #7 [ffff88100def3be8] generic_writepages at ffffffff8111b901 #8 [ffff88100def3c48] journal_submit_data_buffers at ffffffffa0120f67 [jbd2] #9 [ffff88100def3cf8] jbd2_journal_commit_transaction at ffffffffa0121372[jbd2] #10 [ffff88100def3e68] kjournald2 at ffffffffa0127a86 [jbd2] #11 [ffff88100def3ee8] kthread at ffffffff81090db6 #12 [ffff88100def3f48] kernel_thread_helper at ffffffff81516284 Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Alex Chen <alex.chen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09ocfs2: fix deadlock between o2hb thread and o2net_wqJoseph Qi
The following case may lead to o2net_wq and o2hb thread deadlock on o2hb_callback_sem. Currently there are 2 nodes say N1, N2 in the cluster. And N2 down, at the same time, N3 tries to join the cluster. So N1 will handle node down (N2) and join (N3) simultaneously. o2hb o2net_wq ->o2hb_do_disk_heartbeat ->o2hb_check_slot ->o2hb_run_event_list ->o2hb_fire_callbacks ->down_write(&o2hb_callback_sem) ->o2net_hb_node_down_cb ->flush_workqueue(o2net_wq) ->o2net_process_message ->dlm_query_join_handler ->o2hb_check_node_heartbeating ->o2hb_fill_node_map ->down_read(&o2hb_callback_sem) No need to take o2hb_callback_sem in dlm_query_join_handler, o2hb_live_lock is enough to protect live node map. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: xMark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: jiangyiwen <jiangyiwen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09ocfs2: don't fire quorum before connection establishedJunxiao Bi
Firing quorum before connection established can cause unexpected node to reboot. Assume there are 3 nodes in the cluster, Node 1, 2, 3. Node 2 and 3 have wrong ip address of Node 1 in cluster.conf and global heartbeat is enabled in the cluster. After the heatbeats are started on these three nodes, Node 1 will reboot due to quorum fencing. It is similar case if Node 1's networking is not ready when starting the global heartbeat. The reboot is not friendly as customer is not fully ready for ocfs2 to work. Fix it by not allowing firing quorum before the connection is established. In this case, ocfs2 will wait until the wrong configuration is fixed or networking is up to continue. Also update the log to guide the user where to check when connection is not built for a long time. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09fs/ocfs2/dlmglue.c: use __seq_open_private() not seq_open()Rob Jones
Reduce boilerplate code by using seq_open_private() instead of seq_open() Signed-off-by: Rob Jones <rob.jones@codethink.co.uk> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09fs/ocfs2/cluster/netdebug.c: use seq_open_private() not seq_open()Rob Jones
Reduce boilerplate code by using seq_open_private() instead of seq_open() Note that the code in and using sc_common_open() has been quite extensively changed. Not least because there was a latent memory leak in the code as was: if sc_common_open() failed, the previously allocated buffer was not freed. Signed-off-by: Rob Jones <rob.jones@codethink.co.uk> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09fs/ocfs2/dlm/dlmdebug.c: use seq_open_private() not seq_open()Rob Jones
Reduce boilerplate code by using seq_open_private() instead of seq_open() Signed-off-by: Rob Jones <rob.jones@codethink.co.uk> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09ocfs2: remove unused code in dlm_new_lockres()Xue jiufei
Remove the branch that free res->lockname.name because the condition is never satisfied when jump to label error. Signed-off-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09ocfs2/dlm: call dlm_lockres_put without resource spinlockalex chen
dlm_lockres_put() should be called without &res->spinlock, otherwise a deadlock case may happen. spin_lock(&res->spinlock) ... dlm_lockres_put ->dlm_lockres_release ->dlm_print_one_lock_resource ->spin_lock(&res->spinlock) Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09ocfs2: call o2quo_exit() if malloc failed in o2net_init()Joseph Qi
In o2net_init, if malloc failed, it directly returns -ENOMEM. Then o2quo_exit won't be called in init_o2nm. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09ocfs2: fix shift left operations overflowJoseph Qi
ocfs2_inode_info->ip_clusters and ocfs2_dinode->id1.bitmap1.i_total are defined as type u32, so the shift left operations may overflow if volume size is large, for example, 2TB and cluster size is 1MB. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Alex Chen <alex.chen@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09ocfs2/dlm: refactor error handling in dlm_alloc_ctxtJoseph Qi
Refactoring error handling in dlm_alloc_ctxt to simplify code. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Alex Chen <alex.chen@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09fs/ocfs2/stack_user.c: fix typo in ocfs2_control_release()Andrew Morton
It is supposed to zero pv_minor. Reported-by: Himangi Saraogi <himangi774@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-02ocfs2/dlm: should put mle when goto kill in dlm_assert_master_handleralex chen
In dlm_assert_master_handler, the mle is get in dlm_find_mle, should be put when goto kill, otherwise, this mle will never be released. Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-30ocfs2: Back out change to use OCFS2_MAXQUOTAS in ocfs2_setattr()Jan Kara
ocfs2_setattr() actually needs to really use MAXQUOTAS and not OCFS2_MAXQUOTAS since it will pass the array over to VFS. Currently this isn't a problem since MAXQUOTAS == OCFS2_MAXQUOTAS but it would be once we introduce project quotas. CC: Mark Fasheh <mfasheh@suse.com> CC: Joel Becker <jlbec@evilplan.org> CC: ocfs2-devel@oss.oracle.com Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-26ocfs2/dlm: do not get resource spinlock if lockres is newJoseph Qi
There is a deadlock case which reported by Guozhonghua: https://oss.oracle.com/pipermail/ocfs2-devel/2014-September/010079.html This case is caused by &res->spinlock and &dlm->master_lock misordering in different threads. It was introduced by commit 8d400b81cc83 ("ocfs2/dlm: Clean up refmap helpers"). Since lockres is new, it doesn't not require the &res->spinlock. So remove it. Fixes: 8d400b81cc83 ("ocfs2/dlm: Clean up refmap helpers") Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: joyce.xue <xuejiufei@huawei.com> Reported-by: Guozhonghua <guozhonghua@h3c.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-26ocfs2: free vol_label in ocfs2_delete_osb()Joseph Qi
osb->vol_label is malloced in ocfs2_initialize_super but not freed if error occurs or during umount, thus causing a memory leak. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-17ocfs2: Don't use MAXQUOTAS valueJan Kara
MAXQUOTAS value defines maximum number of quota types VFS supports. This isn't necessarily the number of types ocfs2 supports and with addition of project quotas these two numbers stop matching. So make ocfs2 use its private definition. CC: Mark Fasheh <mfasheh@suse.com> CC: Joel Becker <jlbec@evilplan.org> CC: ocfs2-devel@oss.oracle.com Signed-off-by: Jan Kara <jack@suse.cz>
2014-08-29ocfs2: quorum: add a log for node not fencedJunxiao Bi
For debug use, we can see from the log whether the fence decision is made and why it is not fenced. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29ocfs2: o2net: set tcp user timeout to max valueJunxiao Bi
When tcp retransmit timeout(15mins), the connection will be closed. Pending messages may be lost during this time. So we set tcp user timeout to override the retransmit timeout to the max value. This is OK for ocfs2 since we have disk heartbeat, if peer crash, the disk heartbeat will timeout and it will be evicted, if disk heartbeat not timeout and connection idle for a long time, then this means the cluster enters split-brain state, since fence can't happen, we'd better keep the connection and wait network recover. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29ocfs2: o2net: don't shutdown connection when idle timeoutJunxiao Bi
This patch series is to fix a possible message lost bug in ocfs2 when network go bad. This bug will cause ocfs2 hung forever even network become good again. The messages may lost in this case. After the tcp connection is established between two nodes, an idle timer will be set to check its state periodically, if no messages are received during this time, idle timer will timeout, it will shutdown the connection and try to reconnect, so pending messages in tcp queues will be lost. This messages may be from dlm. Dlm may get hung in this case. This may cause the whole ocfs2 cluster hung. This is very possible to happen when network state goes bad. Do the reconnect is useless, it will fail if network state is still bad. Just waiting there for network recovering may be a good idea, it will not lost messages and some node will be fenced until cluster goes into split-brain state, for this case, Tcp user timeout is used to override the tcp retransmit timeout. It will timeout after 25 days, user should have notice this through the provided log and fix the network, if they don't, ocfs2 will fall back to original reconnect way. This patch (of 3): Some messages in the tcp queue maybe lost if we shutdown the connection and reconnect when idle timeout. If packets lost and reconnect success, then the ocfs2 cluster maybe hung. To fix this, we can leave the connection there and do the fence decision when idle timeout, if network recover before fence dicision is made, the connection survive without lost any messages. This bug can be saw when network state go bad. It may cause ocfs2 hung forever if some packets lost. With this fix, ocfs2 will recover from hung if network becomes good again. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29ocfs2: do not write error flag to user structure we cannot copy from/toBen Hutchings
If we failed to copy from the structure, writing back the flags leaks 31 bits of kernel memory (the rest of the ir_flags field). In any case, if we cannot copy from/to the structure, why should we expect putting just the flags to work? Also make sure ocfs2_info_handle_freeinode() returns the right error code if the copy_to_user() fails. Fixes: ddee5cdb70e6 ('Ocfs2: Add new OCFS2_IOC_INFO ioctl for ocfs2 v8.') Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Joel Becker <jlbec@evilplan.org> Acked-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06fs/ocfs2/slot_map.c: replace count*size kzalloc by kcallocFabian Frederick
kcalloc manages count*sizeof overflow. Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06ocfs2: race between umount and unfinished remastering during recoveryTariq Saeed
Orabug: 19074140 When umount is issued during recovery on the new master that has not finished remastering locks, it triggers BUG() in dlm_send_mig_lockres_msg(). Here is the situation: 1) node A has a lock on resource X mastered by node B. 2) node B dies -> node A sets recovering flag for res X 3) Node C becomes the new master for resources owned by the dead node and is remastering locks of the dead node but has not finished the remastering process yet. 4) umount is issued on node C. 5) During processing of umount, ignoring unfished recovery, node C attempts to migrate resource X to node A. 6) node A finds res X in DLM_LOCK_RES_RECOVERING state, considers it a logic error and sends back -EFAULT. 7) node C asserts BUG() upon seeing EFAULT resp from node B. Fix is to delay migrating res X till remastering is finished at which point recovering flag will be cleared on both A and C. Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06ocfs2: remove conversion of total_backoff in dlm_join_domain()Xue jiufei
The unit of total_backoff is msecs not jiffies, so no need to do the conversion. Otherwise, the join timeout is not 90 sec. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06ocfs2: correctly check the return value of ocfs2_search_extent_listYingtai Xie
ocfs2_search_extent_list may return -1, so we should check the return value in ocfs2_split_and_insert, otherwise it may cause array index out of bound. And ocfs2_search_extent_list can only return value less than el->l_next_free_rec, so check if it is equal or larger than le16_to_cpu(el->l_next_free_rec) is meaningless. Signed-off-by: Yingtai Xie <xieyingtai@huawei.com> Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23ocfs2/dlm: do not purge lockres that is queued for assert masterXue jiufei
When workqueue is delayed, it may occur that a lockres is purged while it is still queued for master assert. it may trigger BUG() as follows. N1 N2 dlm_get_lockres() ->dlm_do_master_requery is the master of lockres, so queue assert_master work dlm_thread() start running and purge the lockres dlm_assert_master_worker() send assert master message to other nodes receiving the assert_master message, set master to N2 dlmlock_remote() send create_lock message to N2, but receive DLM_IVLOCKID, if it is RECOVERY lockres, it triggers the BUG(). Another BUG() is triggered when N3 become the new master and send assert_master to N1, N1 will trigger the BUG() because owner doesn't match. So we should not purge lockres when it is queued for assert master. Signed-off-by: joyce.xue <xuejiufei@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23ocfs2: do not return DLM_MIGRATE_RESPONSE_MASTERY_REF to avoid endless,loop ↵jiangyiwen
during umount The following case may lead to endless loop during umount. node A node B node C node D umount volume, migrate lockres1 to B want to lock lockres1, send MASTER_REQUEST_MSG to C init block mle send MIGRATE_REQUEST_MSG to C find a block mle, and then return DLM_MIGRATE_RESPONSE_MASTERY_REF to B set C in refmap umount successfully try to umount, endless loop occurs when migrate lockres1 since C is in refmap So we can fix this endless loop case by only returning DLM_MIGRATE_RESPONSE_MASTERY_REF if it has a mastery mle when receiving MIGRATE_REQUEST_MSG. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: jiangyiwen <jiangyiwen@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Xue jiufei <xuejiufei@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23ocfs2: manually do the iput once ocfs2_add_entry failed in ocfs2_symlink and ↵jiangyiwen
ocfs2_mknod When the call to ocfs2_add_entry() failed in ocfs2_symlink() and ocfs2_mknod(), iput() will not be called during dput(dentry) because no d_instantiate(), and this will lead to umount hung. Signed-off-by: jiangyiwen <jiangyiwen@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23ocfs2: fix a tiny race when running dirop_fileop_racerYiwen Jiang
When running dirop_fileop_racer we found a dead lock case. 2 nodes, say Node A and Node B, mount the same ocfs2 volume. Create /race/16/1 in the filesystem, and let the inode number of dir 16 is less than the inode number of dir race. Node A Node B mv /race/16/1 /race/ right after Node A has got the EX mode of /race/16/, and tries to get EX mode of /race ls /race/16/ In this case, Node A has got the EX mode of /race/16/, and wants to get EX mode of /race/. Node B has got the PR mode of /race/, and wants to get the PR mode of /race/16/. Since EX and PR are mutually exclusive, dead lock happens. This patch fixes this case by locking in ancestor order before trying inode number order. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23ocfs2/dlm: fix misuse of list_move_tail() in dlm_run_purge_list()Xue jiufei
When a lockres in purge list but is still in use, it should be moved to the tail of purge list. dlm_thread will continue to check next lockres in purge list. However, code list_move_tail(&dlm->purge_list, &lockres->purge) will do *no* movements, so dlm_thread will purge the same lockres in this loop again and again. If it is in use for a long time, other lockres will not be processed. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by: joyce.xue <xuejiufei@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>