| Age | Commit message (Collapse) | Author |
|---|
|
Most of the fields in 'struct knfsd_fh' are 2 levels deep (a union and a
struct) and are accessed using macros like:
#define fh_FOO fh_base.fh_new.fb_FOO
This patch makes the union and struct anonymous, so that "fh_FOO" can be
a name directly within 'struct knfsd_fh' and the #defines aren't needed.
The file handle as a whole is sometimes accessed as "fh_base" or
"fh_base.fh_pad", neither of which are particularly helpful names.
As the struct holding the filehandle is now anonymous, we
cannot use the name of that, so we union it with 'fh_raw' and use that
where the raw filehandle is needed. fh_raw also ensure the structure is
large enough for the largest possible filehandle.
fh_raw is a 'char' array, removing any need to cast it for memcpy etc.
SVCFH_fmt() is simplified using the "%ph" printk format. This
changes the appearance of filehandles in dprintk() debugging, making
them a little more precise.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Filehandles not in the "new" or "version 1" format have not been handed
out for new mounts since Linux 2.4 which was released 20 years ago.
I think it is safe to say that no such file handles are still in use,
and that we can drop support for them.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
As an additional clean up, some renaming is done to more closely
reflect the data type and variable names used in the NFSv3 XDR
definition provided in RFC 1813. "attrstat" is an NFSv2 thingie.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
|
|
Collect some nfsd stats per export in addition to the global stats.
A new nfsdfs export_stats file is created. It uses the same ops as the
exports file to iterate the export entries and we use the file's name to
determine the reported info per export. For example:
$ cat /proc/fs/nfsd/export_stats
# Version 1.1
# Path Client Start-time
# Stats
/test localhost 92
fh_stale: 0
io_read: 9
io_write: 1
Every export entry reports the start time when stats collection
started, so stats collecting scripts can know if stats where reset
between samples.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nfsd stats counters can be updated by concurrent nfsd threads without any
protection.
Convert some nfsd_stats and nfsd_net struct members to use percpu counters.
The longest_chain* members of struct nfsd_net remain unprotected.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The two helpers inode_permission() and generic_permission() are used by
the vfs to perform basic permission checking by verifying that the
caller is privileged over an inode. In order to handle idmapped mounts
we extend the two helpers with an additional user namespace argument.
On idmapped mounts the two helpers will make sure to map the inode
according to the mount's user namespace and then peform identical
permission checks to inode_permission() and generic_permission(). If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-6-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
For the case of NFSv4, specify to the client that the pre/post-op
attributes were not recorded atomically with the main operation.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If the underlying filesystem times out, then we want knfsd to return
NFSERR_JUKEBOX/DELAY rather than NFSERR_STALE.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
With NFSv3 nfsd will always attempt to send along WCC data to the
client. This generally involves saving off the in-core inode information
prior to doing the operation on the given filehandle, and then issuing a
vfs_getattr to it after the op.
Some filesystems (particularly clustered or networked ones) have an
expensive ->getattr inode operation. Atomicity is also often difficult
or impossible to guarantee on such filesystems. For those, we're best
off not trying to provide WCC information to the client at all, and to
simply allow it to poll for that information as needed with a GETATTR
RPC.
This patch adds a new flags field to struct export_operations, and
defines a new EXPORT_OP_NOWCC flag that filesystems can use to indicate
that nfsd should not attempt to provide WCC info in NFSv3 replies. It
also adds a blurb about the new flags field and flag to the exporting
documentation.
The server will also now skip collecting this information for NFSv2 as
well, since that info is never used there anyway.
Note that this patch does not add this flag to any filesystem
export_operations structures. This was originally developed to allow
reexporting nfs via nfsd.
Other filesystems may want to consider enabling this flag too. It's hard
to tell however which ones have export operations to enable export via
knfsd and which ones mostly rely on them for open-by-filehandle support,
so I'm leaving that up to the individual maintainers to decide. I am
cc'ing the relevant lists for those filesystems that I think may want to
consider adding this though.
Cc: HPDD-discuss@lists.01.org
Cc: ceph-devel@vger.kernel.org
Cc: cluster-devel@redhat.com
Cc: fuse-devel@lists.sourceforge.net
Cc: ocfs2-devel@oss.oracle.com
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Add tracing to allow us to figure out where any stale filehandle issues
may be originating from.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Return statements in functions returning bool should use true or false
instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
In a traditional NFS deployment using auth_unix, the clients are trusted
to correctly report the credentials of their logged-in users. The
server assumes that only root on client machines is allowed to send
requests from low-numbered ports, so it can use the originating port
number to distinguish "real" NFS clients from NFS clients run by
ordinary users, to prevent ordinary users from spoofing credentials.
The originating port number on a gss-authenticated request is less
important. The authentication ties the request to a user, and we take
it as proof that that user authorized the request. The low port number
check no longer adds much.
So, don't enforce low port numbers in the auth_gss case.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Create and other nfsd ops generally assume we can call lookup_one_len on
inodes with S_IFDIR set. Al says that this assumption isn't true in
general, though it should be for the filesystem objects nfsd sees.
Add a check just to make sure our assumption isn't violated.
Remove a couple checks for i_op->lookup in create code.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Silent a few smatch warnings about indentation
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Those are now defined in fs/nfsd/vfs.h
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
... and neither can ever be NULL
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
...just for clarity.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Convert the following where appropriate:
(1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry).
(2) S_ISREG(dentry->d_inode) to d_is_reg(dentry).
(3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more
complicated than it appears as some calls should be converted to
d_can_lookup() instead. The difference is whether the directory in
question is a real dir with a ->lookup op or whether it's a fake dir with
a ->d_automount op.
In some circumstances, we can subsume checks for dentry->d_inode not being
NULL into this, provided we the code isn't in a filesystem that expects
d_inode to be NULL if the dirent really *is* negative (ie. if we're going to
use d_inode() rather than d_backing_inode() to get the inode pointer).
Note that the dentry type field may be set to something other than
DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS
manages the fall-through from a negative dentry to a lower layer. In such a
case, the dentry type of the negative union dentry is set to the same as the
type of the lower dentry.
However, if you know d_inode is not NULL at the call site, then you can use
the d_is_xxx() functions even in a filesystem.
There is one further complication: a 0,0 chardev dentry may be labelled
DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was
intended for special directory entry types that don't have attached inodes.
The following perl+coccinelle script was used:
use strict;
my @callers;
open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') ||
die "Can't grep for S_ISDIR and co. callers";
@callers = <$fd>;
close($fd);
unless (@callers) {
print "No matches\n";
exit(0);
}
my @cocci = (
'@@',
'expression E;',
'@@',
'',
'- S_ISLNK(E->d_inode->i_mode)',
'+ d_is_symlink(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISDIR(E->d_inode->i_mode)',
'+ d_is_dir(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISREG(E->d_inode->i_mode)',
'+ d_is_reg(E)' );
my $coccifile = "tmp.sp.cocci";
open($fd, ">$coccifile") || die $coccifile;
print($fd "$_\n") || die $coccifile foreach (@cocci);
close($fd);
foreach my $file (@callers) {
chomp $file;
print "Processing ", $file, "\n";
system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 ||
die "spatch failed";
}
[AV: overlayfs parts skipped]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
In a later patch, we're going to need some atomic bit flags. Since that
field will need to be an unsigned long, we mitigate that space
consumption by migrating some other bitflags to the new field. Start
with the rq_secure flag.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The filehandle structs all use host-endian values, but will sometimes
stuff big-endian values into those fields. This is OK since these
values are opaque to the client, but it confuses sparse. Add __force to
make it clear that we are doing this intentionally.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Don't using cache_get besides export.h, using exp_get for export.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
When debugging, rpc prints messages from dprintk(KERN_WARNING ...)
with "^A4" prefixed,
[ 2780.339988] ^A4nfsd: connect from unprivileged port: 127.0.0.1, port=35316
Trond tells,
> dprintk != printk. We have NEVER supported dprintk(KERN_WARNING...)
This patch removes using of dprintk with KERN_WARNING.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Use fh_fsid when reffering to the fsid part of the filehandle. The
variable length auth field envisioned in nfsfh wasn't ever implemented.
Also clean up some lose ends around this and document the file handle
format better.
Btw, why do we even export nfsfh.h to userspace? The file handle very
much is kernel private, and nothing in nfs-utils include the header
either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The reporter saw a NULL dereference when a filesystem's ->mknod returned
success but left the dentry negative, and then nfsd tried to dereference
d_inode (in this case because the CREATE was followed by a GETATTR in
the same nfsv4 compound).
fh_update already checks for this and another broken case, but for some
reason it returns success and leaves nfsd trying to soldier on. If it
failed we'd avoid the crash. There's only so much we can do with a
buggy filesystem, but it's easy enough to bail out here, so let's do
that.
Reported-by: Antti Tönkyrä <daedalus@pingtimeout.net>
Tested-by: Antti Tönkyrä <daedalus@pingtimeout.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This commit adds FILEID_INVALID = 0xff in fid_type to
indicate invalid fid_type
It avoids using magic number 255
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Vivek Trivedi <vtrivedi018@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
When mnt_want_write() starts to handle freezing it will get a full lock
semantics requiring proper lock ordering. So push mnt_want_write() call
consistently outside of i_mutex.
CC: linux-nfs@vger.kernel.org
CC: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This patch replaces cache_put() call for svc_export_cache by exp_put() call.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add some more comments, simplify logic, do & S_IFMT just once, name
"type" more helpfully.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
We allow the fh_verify caller to specify that any object *except* those
of a given type is allowed, by passing a negative type. But only one
caller actually uses it. Open-code that check in the one caller.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
A typo in 12045a6ee9908b "nfsd: let "insecure" flag vary by
pseudoflavor" reversed the sense of the "insecure" flag.
Reported-by: Michael Guntsche <mike@it-loops.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The new .h files have paths at the top that are now out of date. While
we're here, just remove all of those from fs/nfsd; they never served any
purpose.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
On V4ROOT exports, only accept filehandles that are the *root* of some
export. This allows mountd to allow or deny access to individual
directories and symlinks on the pseudofilesystem.
Note that the checks in readdir and lookup are not enough, since a
malicious host with access to the network could guess filehandles that
they weren't able to obtain through lookup or readdir.
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
This was an oversight; it should be among the export flags that can be
allowed to vary by pseudoflavor. This allows an administrator to (for
example) allow auth_sys mounts only from low ports, but allow auth_krb5
mounts to use any port.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Lots of include/linux/nfsd/* headers are only used by
nfsd module. Move them to the source directory
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Now that the headers are fixed and carry their own wait, all fs/nfsd/
source files can include a minimal set of headers. and still compile just
fine.
This patch should improve the compilation speed of the nfsd module.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
All nfsd security depends on the security checks in fh_verify, and
especially on nfsd_setuser().
It therefore bothers me that the nfsd_setuser call may be made from
three different places, depending on whether the filehandle has already
been mapped to a dentry, and on whether subtreechecking is in force.
Instead, make an unconditional call in fh_verify(), so it's trivial to
verify that the call always occurs.
That leaves us with a redundant nfsd_setuser() call in the subtreecheck
case--it needs the correct user set earlier in order to check execute
permissions on the path to this filehandle--but I'm willing to accept
that minor inefficiency in the subtreecheck case in return for more
straightforward permission checking.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
None of this stuff is used outside nfsd, so move it out of the common
linux include directory.
Actually, probably none of the stuff in include/linux/nfsd/nfsd.h really
belongs there, so later we may remove that file entirely.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
A number of callers (nfsd4_encode_fattr(), at least) don't bother to
release the filehandle returned to fh_compose() if fh_compose() returns
an error. So, modify fh_compose() to release the filehandle before
returning an error.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
More trivial cleanup.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
The file nfsfh.c contains two static variables nfsd_nr_verified and
nfsd_nr_put. These are counters which are incremented as a side
effect of the fh_verify() fh_compose() and fh_put() operations,
i.e. at least twice per NFS call for any non-trivial workload.
Needless to say this makes the cacheline that contains them (and any
other innocent victims) a very hot contention point indeed under high
call-rate workloads on multiprocessor NFS server. It also turns out
that these counters are not used anywhere. They're not reported to
userspace, they're not used in logic, they're not even exported from
the object file (let alone the module). All they do is waste CPU time.
So this patch removes them.
Tests on a 16 CPU Altix A4700 with 2 10gige Myricom cards, configured
separately (no bonding). Workload is 640 client threads doing directory
traverals with random small reads, from server RAM.
Before
======
Kernel profile:
% cumulative self self total
time samples samples calls 1/call 1/call name
6.05 2716.00 2716.00 30406 0.09 1.02 svc_process
4.44 4706.00 1990.00 1975 1.01 1.01 spin_unlock_irqrestore
3.72 6376.00 1670.00 1666 1.00 1.00 svc_export_put
3.41 7907.00 1531.00 1786 0.86 1.02 nfsd_ofcache_lookup
3.25 9363.00 1456.00 10965 0.13 1.01 nfsd_dispatch
3.10 10752.00 1389.00 1376 1.01 1.01 nfsd_cache_lookup
2.57 11907.00 1155.00 4517 0.26 1.03 svc_tcp_recvfrom
...
2.21 15352.00 1003.00 1081 0.93 1.00 nfsd_choose_ofc <----
^^^^
Here the function nfsd_choose_ofc() reads a global variable
which by accident happened to be located in the same cacheline as
nfsd_nr_verified.
Call rate:
nullarbor:~ # pmdumptext nfs3.server.calls
...
Thu Dec 13 00:15:27 184780.663
Thu Dec 13 00:15:28 184885.881
Thu Dec 13 00:15:29 184449.215
Thu Dec 13 00:15:30 184971.058
Thu Dec 13 00:15:31 185036.052
Thu Dec 13 00:15:32 185250.475
Thu Dec 13 00:15:33 184481.319
Thu Dec 13 00:15:34 185225.737
Thu Dec 13 00:15:35 185408.018
Thu Dec 13 00:15:36 185335.764
After
=====
kernel profile:
% cumulative self self total
time samples samples calls 1/call 1/call name
6.33 2813.00 2813.00 29979 0.09 1.01 svc_process
4.66 4883.00 2070.00 2065 1.00 1.00 spin_unlock_irqrestore
4.06 6687.00 1804.00 2182 0.83 1.00 nfsd_ofcache_lookup
3.20 8110.00 1423.00 10932 0.13 1.00 nfsd_dispatch
3.03 9456.00 1346.00 1343 1.00 1.00 nfsd_cache_lookup
2.62 10622.00 1166.00 4645 0.25 1.01 svc_tcp_recvfrom
[...]
0.10 42586.00 44.00 74 0.59 1.00 nfsd_choose_ofc <--- HA!!
^^^^
Call rate:
nullarbor:~ # pmdumptext nfs3.server.calls
...
Thu Dec 13 01:45:28 194677.118
Thu Dec 13 01:45:29 193932.692
Thu Dec 13 01:45:30 194294.364
Thu Dec 13 01:45:31 194971.276
Thu Dec 13 01:45:32 194111.207
Thu Dec 13 01:45:33 194999.635
Thu Dec 13 01:45:34 195312.594
Thu Dec 13 01:45:35 195707.293
Thu Dec 13 01:45:36 194610.353
Thu Dec 13 01:45:37 195913.662
Thu Dec 13 01:45:38 194808.675
i.e. about a 5.3% improvement in call rate.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Reviewed-by: David Chinner <dgc@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
When determining the fsid_type in fh_compose(), the setting of the FID
via fsid= export option needs to take precedence over using the UUID
device id.
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
