| Age | Commit message (Collapse) | Author |
|---|
|
When we pass in zero as an io-wq worker number limit it shouldn't
actually change the limits but return the old value, follow that
behaviour with deferred limits setup as well.
Cc: stable@kernel.org # 5.15
Reported-by: Beld Zhang <beldzhang@gmail.com>
Fixes: e139a1ec92f8d ("io_uring: apply max_workers limit to all future users")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1b222a92f7a78a24b042763805e891a4cdd4b544.1636384034.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The kernel test robot correctly identifies that we store sqe twice,
remove the earlier one that is done before validating the index.
Fixes: f75d118349be ("io_uring: harder fdinfo sq/cq ring iterating")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After the assignment, only exit path with label 'err' uses ret as
return value. However,before exiting through this path with label 'err',
ret is assigned with the return value of io_wq_max_workers(). Hence, the
initial assignment is redundant and can be removed.
Signed-off-by: Nghia Le <nghialm78@gmail.com>
Link: https://lore.kernel.org/r/20211102190521.28291-1-nghialm78@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The fix for linked timeout unprep got a bit distored with two rebases,
handle linked timeouts for IO_APOLL_READY as with all other cases, i.e.
queue it at the end of the function.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/130b1ea5605bbd81d7b874a95332295799d33b81.1635863773.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add LSM/SELinux/Smack controls and auditing for io-uring.
As usual, the individual commit descriptions have more detail, but we
were basically missing two things which we're adding here:
+ establishment of a proper audit context so that auditing of
io-uring ops works similarly to how it does for syscalls (with
some io-uring additions because io-uring ops are *not* syscalls)
+ additional LSM hooks to enable access control points for some of
the more unusual io-uring features, e.g. credential overrides.
The additional audit callouts and LSM hooks were done in conjunction
with the io-uring folks, based on conversations and RFC patches
earlier in the year.
- Fixup the binder credential handling so that the proper credentials
are used in the LSM hooks; the commit description and the code
comment which is removed in these patches are helpful to understand
the background and why this is the proper fix.
- Enable SELinux genfscon policy support for securityfs, allowing
improved SELinux filesystem labeling for other subsystems which make
use of securityfs, e.g. IMA.
* tag 'selinux-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
security: Return xattr name from security_dentry_init_security()
selinux: fix a sock regression in selinux_ip_postroute_compat()
binder: use cred instead of task for getsecid
binder: use cred instead of task for selinux checks
binder: use euid from cred instead of using task
LSM: Avoid warnings about potentially unused hook variables
selinux: fix all of the W=1 build warnings
selinux: make better use of the nf_hook_state passed to the NF hooks
selinux: fix race condition when computing ocontext SIDs
selinux: remove unneeded ipv6 hook wrappers
selinux: remove the SELinux lockdown implementation
selinux: enable genfscon labeling for securityfs
Smack: Brutalist io_uring support
selinux: add support for the io_uring access controls
lsm,io_uring: add LSM hooks to io_uring
io_uring: convert io_uring to the secure anon inode interface
fs: add anon_inode_getfile_secure() similar to anon_inode_getfd_secure()
audit: add filtering for io_uring records
audit,io_uring,io-wq: add some basic audit support to io_uring
audit: prepare audit_context for use in calling contexts beyond syscalls
|
|
Pull kiocb->ki_complete() cleanup from Jens Axboe:
"This removes the res2 argument from kiocb->ki_complete().
Only the USB gadget code used it, everybody else passes 0. The USB
guys checked the user gadget code they could find, and everybody just
uses res as expected for the async interface"
* tag 'for-5.16/ki_complete-2021-10-29' of git://git.kernel.dk/linux-block:
fs: get rid of the res2 iocb->ki_complete argument
usb: remove res2 argument from gadget code completions
|
|
Pull io_uring updates from Jens Axboe:
"Light on new features - basically just the hybrid mode support.
Outside of that it's just fixes, cleanups, and performance
improvements.
In detail:
- Add ring related information to the fdinfo output (Hao)
- Hybrid async mode (Hao)
- Support for batched issue on block (me)
- sqe error trace improvement (me)
- IOPOLL efficiency improvements (Pavel)
- submit state cleanups and improvements (Pavel)
- Completion side improvements (Pavel)
- Drain improvements (Pavel)
- Buffer selection cleanups (Pavel)
- Fixed file node improvements (Pavel)
- io-wq setup cancelation fix (Pavel)
- Various other performance improvements and cleanups (Pavel)
- Misc fixes (Arnd, Bixuan, Changcheng, Hao, me, Noah)"
* tag 'for-5.16/io_uring-2021-10-29' of git://git.kernel.dk/linux-block: (97 commits)
io-wq: remove worker to owner tw dependency
io_uring: harder fdinfo sq/cq ring iterating
io_uring: don't assign write hint in the read path
io_uring: clusterise ki_flags access in rw_prep
io_uring: kill unused param from io_file_supports_nowait
io_uring: clean up timeout async_data allocation
io_uring: don't try io-wq polling if not supported
io_uring: check if opcode needs poll first on arming
io_uring: clean iowq submit work cancellation
io_uring: clean io_wq_submit_work()'s main loop
io-wq: use helper for worker refcounting
io_uring: implement async hybrid mode for pollable requests
io_uring: Use ERR_CAST() instead of ERR_PTR(PTR_ERR())
io_uring: split logic of force_nonblock
io_uring: warning about unused-but-set parameter
io_uring: inform block layer of how many requests we are submitting
io_uring: simplify io_file_supports_nowait()
io_uring: combine REQ_F_NOWAIT_{READ,WRITE} flags
io_uring: arm poll for non-nowait files
fs/io_uring: Prioritise checking faster conditions first in io_write
...
|
|
Pull block updates from Jens Axboe:
- mq-deadline accounting improvements (Bart)
- blk-wbt timer fix (Andrea)
- Untangle the block layer includes (Christoph)
- Rework the poll support to be bio based, which will enable adding
support for polling for bio based drivers (Christoph)
- Block layer core support for multi-actuator drives (Damien)
- blk-crypto improvements (Eric)
- Batched tag allocation support (me)
- Request completion batching support (me)
- Plugging improvements (me)
- Shared tag set improvements (John)
- Concurrent queue quiesce support (Ming)
- Cache bdev in ->private_data for block devices (Pavel)
- bdev dio improvements (Pavel)
- Block device invalidation and block size improvements (Xie)
- Various cleanups, fixes, and improvements (Christoph, Jackie,
Masahira, Tejun, Yu, Pavel, Zheng, me)
* tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits)
blk-mq-debugfs: Show active requests per queue for shared tags
block: improve readability of blk_mq_end_request_batch()
virtio-blk: Use blk_validate_block_size() to validate block size
loop: Use blk_validate_block_size() to validate block size
nbd: Use blk_validate_block_size() to validate block size
block: Add a helper to validate the block size
block: re-flow blk_mq_rq_ctx_init()
block: prefetch request to be initialized
block: pass in blk_mq_tags to blk_mq_rq_ctx_init()
block: add rq_flags to struct blk_mq_alloc_data
block: add async version of bio_set_polled
block: kill DIO_MULTI_BIO
block: kill unused polling bits in __blkdev_direct_IO()
block: avoid extra iter advance with async iocb
block: Add independent access ranges support
blk-mq: don't issue request directly in case that current is to be blocked
sbitmap: silence data race warning
blk-cgroup: synchronize blkg creation against policy deactivation
block: refactor bio_iov_bvec_set()
block: add single bio async direct IO helper
...
|
|
Pull memory folios from Matthew Wilcox:
"Add memory folios, a new type to represent either order-0 pages or the
head page of a compound page. This should be enough infrastructure to
support filesystems converting from pages to folios.
The point of all this churn is to allow filesystems and the page cache
to manage memory in larger chunks than PAGE_SIZE. The original plan
was to use compound pages like THP does, but I ran into problems with
some functions expecting only a head page while others expect the
precise page containing a particular byte.
The folio type allows a function to declare that it's expecting only a
head page. Almost incidentally, this allows us to remove various calls
to VM_BUG_ON(PageTail(page)) and compound_head().
This converts just parts of the core MM and the page cache. For 5.17,
we intend to convert various filesystems (XFS and AFS are ready; other
filesystems may make it) and also convert more of the MM and page
cache to folios. For 5.18, multi-page folios should be ready.
The multi-page folios offer some improvement to some workloads. The
80% win is real, but appears to be an artificial benchmark (postgres
startup, which isn't a serious workload). Real workloads (eg building
the kernel, running postgres in a steady state, etc) seem to benefit
between 0-10%. I haven't heard of any performance losses as a result
of this series. Nobody has done any serious performance tuning; I
imagine that tweaking the readahead algorithm could provide some more
interesting wins. There are also other places where we could choose to
create large folios and currently do not, such as writes that are
larger than PAGE_SIZE.
I'd like to thank all my reviewers who've offered review/ack tags:
Christoph Hellwig, David Howells, Jan Kara, Jeff Layton, Johannes
Weiner, Kirill A. Shutemov, Michal Hocko, Mike Rapoport, Vlastimil
Babka, William Kucharski, Yu Zhao and Zi Yan.
I'd also like to thank those who gave feedback I incorporated but
haven't offered up review tags for this part of the series: Nick
Piggin, Mel Gorman, Ming Lei, Darrick Wong, Ted Ts'o, John Hubbard,
Hugh Dickins, and probably a few others who I forget"
* tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecache: (90 commits)
mm/writeback: Add folio_write_one
mm/filemap: Add FGP_STABLE
mm/filemap: Add filemap_get_folio
mm/filemap: Convert mapping_get_entry to return a folio
mm/filemap: Add filemap_add_folio()
mm/filemap: Add filemap_alloc_folio
mm/page_alloc: Add folio allocation functions
mm/lru: Add folio_add_lru()
mm/lru: Convert __pagevec_lru_add_fn to take a folio
mm: Add folio_evictable()
mm/workingset: Convert workingset_refault() to take a folio
mm/filemap: Add readahead_folio()
mm/filemap: Add folio_mkwrite_check_truncate()
mm/filemap: Add i_blocks_per_folio()
mm/writeback: Add folio_redirty_for_writepage()
mm/writeback: Add folio_account_redirty()
mm/writeback: Add folio_clear_dirty_for_io()
mm/writeback: Add folio_cancel_dirty()
mm/writeback: Add folio_account_cleaned()
mm/writeback: Add filemap_dirty_folio()
...
|
|
The ring iteration is racy, which isn't necessarily a problem except it
can cause us to iterate the whole thing. That isn't desired or ideal,
and it can lead to excessive runtimes of reading fdinfo.
Cap the iteration at tail - head OR the ring size. While in there, clean
up the ring masking and just dump the raw values along with the masks.
That provides more useful debug info.
Fixes: 83f84356bc8f ("io_uring: add more uring info to fdinfo for debug")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move this out of the generic read/write prep path, and place it in the
write specific kiocb setup instead.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The second argument was only used by the USB gadget code, yet everyone
pays the overhead of passing a zero to be passed into aio, where it
ends up being part of the aio res2 value.
Now that everybody is passing in zero, kill off the extra argument.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ioprio setup doesn't depend on other fields that are modified in
io_prep_rw() and we can move it down in the function without worrying
about performance. It's useful as it makes iocb->ki_flags
accesses/modifications closer together, so it's more likely the compiler
will cache it in a register and avoid extra reloads.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8ee98779c06f1b59f6039b1e292db4332efd664b.1634987320.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_file_supports_nowait() doesn't use rw argument anymore, remove it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4bd6709fc573d70c866ea656cb7a7dbe94be8026.1634987320.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
opcode prep functions are one of the first things that are called, we
can't have ->async_data allocated at this point and it's certainly a
bug. Reflect this assumption in io_timeout_prep() and add a WARN_ONCE
just in case.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/75a28ca7dbcc5af8b6cd9092819e8384c24dedd4.1634987320.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If an opcode doesn't support polling, just let it be executed
synchronously in iowq, otherwise it will do a nonblock attempt just to
fail in io_arm_poll_handler() and return back to blocking execution.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6401256db01b88f448f15fcd241439cb76f5b940.1634987320.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
->pollout or ->pollin are set only for opcodes that need a file, so if
io_arm_poll_handler() tests them first we can be sure that the request
has file set and the ->file check can be removed.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9adfe4f543d984875e516fce6da35348aab48668.1634987320.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we've got IO_WQ_WORK_CANCEL in io_wq_submit_work(), handle the error
on the same lines as the check instead of having a weird code flow. The
main loop doesn't change but goes one indention left.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ff4a09cf41f7a22bbb294b6f1faea721e21fe615.1634987320.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Do a bit of cleaning for the main loop of io_wq_submit_work(). Get rid
of switch, just replace it with a single if as we're retrying in both
other cases. Kill issue_sqe label, Get rid of needs_poll nesting and
disambiguate a bit the comment.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ed12ce0c64e051f9a6b8a37a24f8ea554d299c29.1634987320.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The current logic of requests with IOSQE_ASYNC is first queueing it to
io-worker, then execute it in a synchronous way. For unbound works like
pollable requests(e.g. read/write a socketfd), the io-worker may stuck
there waiting for events for a long time. And thus other works wait in
the list for a long time too.
Let's introduce a new way for unbound works (currently pollable
requests), with this a request will first be queued to io-worker, then
executed in a nonblock try rather than a synchronous way. Failure of
that leads it to arm poll stuff and then the worker can begin to handle
other works.
The detail process of this kind of requests is:
step1: original context:
queue it to io-worker
step2: io-worker context:
nonblock try(the old logic is a synchronous try here)
|
|--fail--> arm poll
|
|--(fail/ready)-->synchronous issue
|
|--(succeed)-->worker finish it's job, tw
take over the req
This works much better than the old IOSQE_ASYNC logic in cases where
unbound max_worker is relatively small. In this case, number of
io-worker eazily increments to max_worker, new worker cannot be created
and running workers stuck there handling old works in IOSQE_ASYNC mode.
In my 64-core machine, set unbound max_worker to 20, run echo-server,
turns out:
(arguments: register_file, connetion number is 1000, message size is 12
Byte)
original IOSQE_ASYNC: 76664.151 tps
after this patch: 166934.985 tps
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20211018133445.103438-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Another change to the API io-wq worker limitation API added in 5.15,
apply the limit to all prior users that already registered a tctx. It
may be confusing as it's now, in particular the change covers the
following 2 cases:
TASK1 | TASK2
_________________________________________________
ring = create() |
| limit_iowq_workers()
*not limited* |
TASK1 | TASK2
_________________________________________________
ring = create() |
| issue_requests()
limit_iowq_workers() |
| *not limited*
A note on locking, it's safe to traverse ->tctx_list as we hold
->uring_lock, but do that after dropping sqd->lock to avoid possible
problems. It's also safe to access tctx->io_wq there because tasks
kill it only after removing themselves from tctx_list, see
io_uring_cancel_generic() -> io_uring_clean_tctx()
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d6e09ecc3545e4dc56e43c906ee3d71b7ae21bed.1634818641.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_unprep_linked_timeout() is broken, first it needs to return back
REQ_F_ARM_LTIMEOUT, so the linked timeout is enqueued and disarmed. But
now we refcounted it, and linked timeouts may get not executed at all,
leaking a request.
Just kill the unprep optimisation.
Fixes: 906c6caaf586 ("io_uring: optimise io_prep_linked_timeout()")
Reported-by: Beld Zhang <beldzhang@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/51b8e2bfc4bea8ee625cf2ba62b2a350cc9be031.1634719585.git.asml.silence@gmail.com
Link: https://github.com/axboe/liburing/issues/460
Reported-by: Beld Zhang <beldzhang@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, IORING_REGISTER_IOWQ_MAX_WORKERS applies only to the task
that issued it, it's unexpected for users. If one task creates a ring,
limits workers and then passes it to another task the limit won't be
applied to the other task.
Another pitfall is that a task should either create a ring or submit at
least one request for IORING_REGISTER_IOWQ_MAX_WORKERS to work at all,
furher complicating the picture.
Change the API, save the limits and apply to all future users. Note, it
should be done first before giving away the ring or submitting new
requests otherwise the result is not guaranteed.
Fixes: 2e480058ddc2 ("io-wq: provide a way to limit max number of workers")
Link: https://github.com/axboe/liburing/issues/460
Reported-by: Beld Zhang <beldzhang@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/51d0bae97180e08ab722c0d5c93e7439cfb6f697.1634683237.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use ERR_CAST() instead of ERR_PTR(PTR_ERR()).
This makes it more readable and also fix this warning detected by
err_cast.cocci:
./fs/io_uring.c: WARNING: 3208: 11-18: ERR_CAST can be used with buf
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Link: https://lore.kernel.org/r/20211020084948.1038420-1-deng.changcheng@zte.com.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently force_nonblock stands for three meanings:
- nowait or not
- in an io-worker or not(hold uring_lock or not)
Let's split the logic to two flags, IO_URING_F_NONBLOCK and
IO_URING_F_UNLOCKED for convenience of the next patch.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20211018133431.103298-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When enabling -Wunused warnings by building with W=1, I get an
instance of the -Wunused-but-set-parameter warning in the io_uring code:
fs/io_uring.c: In function 'io_queue_async_work':
fs/io_uring.c:1445:61: error: parameter 'locked' set but not used [-Werror=unused-but-set-parameter]
1445 | static void io_queue_async_work(struct io_kiocb *req, bool *locked)
| ~~~~~~^~~~~~
There are very few warnings of this type, so it would be nice to enable
this by default and fix all the existing instances. As the assignment
serves no purpose by itself other than to prevent developers from using
the variable, an easy workaround is to remove the assignment and just
rename the argument to "dont_use".
Fixes: f237c30a5610 ("io_uring: batch task work locking")
Link: https://lore.kernel.org/lkml/20210920121352.93063-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211019153507.348480-1-arnd@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The block layer can use this knowledge to make smarter decisions on
how to handle the request, if it knows that N more may be coming. Switch
to using blk_start_plug_nr_ios() to pass in that information.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make sure that REQ_F_SUPPORT_NOWAIT is always set io_prep_rw(), and so
we can stop caring about setting it down the line simplifying
io_file_supports_nowait().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/60c8f1f5e2cb45e00f4897b2cec10c5b3669da91.1634425438.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge REQ_F_NOWAIT_READ and REQ_F_NOWAIT_WRITE into one flag, i.e.
REQ_F_SUPPORT_NOWAIT. First it gets rid of dependence on CONFIG_64BIT
but also simplifies the code.
One thing to consider is when we don't have ->{read,write}_iter and go
through loop_rw_iter(). Just fail it with -EAGAIN if we expect nowait
behaviour but not sure whether it supports it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f832a20e5186c2e79c6519280c238f559a1d2bbc.1634425438.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't check if we can do nowait before arming apoll, there are several
reasons for that. First, we don't care much about files that don't
support nowait. Second, it may be useful -- we don't want to be taking
away extra workers from io-wq when it can go in some async. Even if it
will go through io-wq eventually, it make difference in the numbers of
workers actually used. And the last one, it's needed to clean nowait in
future commits.
[kernel test robot: fix unused-var]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9d06f3cb2c8b686d970269a87986f154edb83043.1634425438.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This commit reorders the conditions in a branch in io_write. The
reorder to check 'ret2 == -EAGAIN' first as checking
'(req->ctx->flags & IORING_SETUP_IOPOLL)' will likely be more
expensive due to 2x memory derefences.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Link: https://lore.kernel.org/r/20211017013229.4124279-1-goldstein.w.n@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We already store req->file in a variable in io_prep_rw(), just use it
instead of a couple of left references to kicob->ki_filp.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2f5889fc7ab670daefd5ccaedd99416d8355f0ad.1634314022.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move fixed rw io_req_set_rsrc_node() from rw prep into
io_import_fixed(), if we're using fixed buffers it will always be called
during submission as we save the state in advance,
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/68c06f66d5aa9661f1e4b88d08c52d23528297ec.1634314022.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We pass iovec** into __io_import_iovec(), which should keep it,
initialise and modify accordingly. It's expensive, return it directly
from __io_import_iovec encoding errors with ERR_PTR if needed.
io_import_iovec keeps the old interface, but it's inline and so
everything is optimised nicely.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6230e9769982f03a8f86fa58df24666088c44d3e.1634314022.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Delay loading req->rw.{addr,len} in io_import_iovec until it's really
needed, so removing extra loads for the fixed path, which doesn't use
them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3cc48dd0c4f1a37c4ce9aab5784281a2d83ad8be.1634314022.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't decide about locking based on io_wq_current_is_worker(), it's not
consistent with all other code and is expensive, use issue_flags.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7546d5a58efa4360173541c6fe02ee6b8c7b4ea7.1634314022.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't load req->ctx in advance, it takes an extra register and the field
stays valid even after opcode handlers. It also optimises out req->ctx
load in io_iopoll_req_issued() once it's inlined.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1e45ff671c44be0eb904f2e448a211734893fa0b.1634314022.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Combine force_nonblock branches (which is already optimised by
compiler), flip branches so the most hot/common path is the first, e.g.
as with non on-stack iov setup, and add extra likely/unlikely
attributions for errror paths.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2c2536c5896d70994de76e387ea09a0402173a3f.1634144845.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make io_import_iovec taking struct io_rw_state instead of an iter
pointer. First it takes care of initialising iovec pointer, which can be
forgotten. Even more, we can not init it if not needed, e.g. in case of
IORING_OP_READ_FIXED or IORING_OP_READ. Also hide saving iter_state
inside of it by splitting out an inline function of it to avoid extra
ifs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b1bbc213a95e5272d4da5867bb977d9acb6f2109.1634144845.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
First, change IO_URING_F_NONBLOCK to take sign bit of the int, so
checking for it can be turned into test + sign-based-jump, makes the
binary smaller and may be faster.
Then, instead of passing need_lock boolean into io_import_iovec() just
give it issue_flags, which is already stored somewhere. Saves some space
on stack, a couple of test + cmov operations and other conversions.
note: we still leave
force_nonblock = issue_flags & IO_URING_F_NONBLOCK
variable, but it's optimised out by the compiler into testing
issue_flags directly.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ee96547e692f6c975c229cd82fc721679571a734.1634144845.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently io_read() and io_write() keep separate pointers to an iter and
to struct iov_iter_state, which is not great for register spilling and
requires more on-stack copies. They are both either on-stack or in
req->async_data at the same time, so use struct io_rw_state and keep a
pointer only to it, so having all the state with just one pointer.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/5c5e7ffd7dc25fc35075c70411ba99df72f237fa.1634144845.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new struct io_rw_state storing all iov related bits: fast iov,
iterator and iterator state. Not much changes here, simply convert
struct io_async_rw to use it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e8245ffcb568b228a009ec1eb79c993c813679f1.1634144845.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't override req->result in io_complete_rw_iopoll() when it's already
of the same value, we have an if just above it, so move the assignment
there. Also, add one simle unlikely() in __io_complete_rw_common().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8dfeb4f84026a20172bcf82c05010abe955874ae.1634144845.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rearrange io_read return handling so first we expect it completing
successfully and only then checking for errors, which is a colder path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c91c7c2da11815ec8b04b5d872f60dc4cde662c5.1634144845.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some of the functions keep issue_flags as int, change those to unsigned.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/04ad43797783bc9cc7567f287ab545518f8e8cf2.1634144845.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Apparently, percpu_ref_put/get() are expensive enough if done per
request, get them in a batch and cache on the submission side to avoid
getting it over and over again. Also, if we're completing under
uring_lock, return refs back into the cache instead of
perfcpu_ref_put(). Pretty similar to how we do tctx->cached_refs
accounting, but fall back to normal putting when we already changed a
rsrc node by the time of free.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b40d8c5bc77d3c9550df8a319117a374ac85f8f4.1633817310.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_req_set_rsrc_node() reloads loads req->ctx, however it's already in
registers in all use cases, so better to pass it as a parameter.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/67a25557b8a51e90bfd578447a6f1671911b05ae.1633817310.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
[ 158.514382] WARNING: CPU: 5 PID: 15251 at fs/io_uring.c:1141 io_free_batch_list+0x269/0x360
[ 158.514426] RIP: 0010:io_free_batch_list+0x269/0x360
[ 158.514437] Call Trace:
[ 158.514440] __io_submit_flush_completions+0xde/0x180
[ 158.514444] tctx_task_work+0x14a/0x220
[ 158.514447] task_work_run+0x64/0xa0
[ 158.514448] __do_sys_io_uring_enter+0x7c/0x970
[ 158.514450] __x64_sys_io_uring_enter+0x22/0x30
[ 158.514451] do_syscall_64+0x43/0x90
[ 158.514453] entry_SYSCALL_64_after_hwframe+0x44/0xae
We should not touch request internals including req->comp_list.next
after putting our ref if it's not final, e.g. we can start freeing
requests from the free cache.
Fixed: 62ca9cb93e7f8 ("io_uring: optimise io_free_batch_list()")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b1f4df38fbb8f111f52911a02fd418d0283a4e6f.1634047298.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
task_work_add() takes care of waking up the thread, remove useless
wake_up_process().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/de9a71ee255112dcaed3b5d426be24934e74722c.1633532552.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Looking at the assembly, the compiler decided to reload req->opcode in
io_op_defs[opcode].needs_file instead of one it had in a register, so
store it in a temp variable so it can be optimised out. Also move the
personality block later, it's better for spilling/etc. as it only
depends on @sqe, which we're keeping anyway.
By the way, zero req->opcode if it over IORING_OP_LAST, not a problem,
at the moment but is safer.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6ba869f5f8b7b0f991c87fdf089f0abf87cbe06b.1633532552.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
