| Age | Commit message (Collapse) | Author |
|---|
|
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
|
|
Patch series "remove Xen tmem leftovers".
Since the removal of the Xen tmem driver in 2019, the cleancache hooks
are entirely unused, as are large parts of frontswap. This series
against linux-next (with the folio changes included) removes
cleancaches, and cuts down frontswap to the bits actually used by zswap.
This patch (of 13):
The cleancache subsystem is unused since the removal of Xen tmem driver
in commit 814bbf49dcd0 ("xen: remove tmem driver").
[akpm@linux-foundation.org: remove now-unreachable code]
Link: https://lkml.kernel.org/r/20211224062246.1258487-1-hch@lst.de
Link: https://lkml.kernel.org/r/20211224062246.1258487-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've tried to address some performance issues in
f2fs_checkpoint and direct IO flows. Also, there was a work to enhance
the page cache management used for compression. Other than them, we've
done typical work including sysfs, code clean-ups, tracepoint, sanity
check, in addition to bug fixes on corner cases.
Enhancements:
- use iomap for direct IO
- try to avoid lock contention to improve f2fs_ckpt speed
- avoid unnecessary memory allocation in compression flow
- POSIX_FADV_DONTNEED drops the page cache containing compression
pages
- add some sysfs entries (gc_urgent_high_remaining, pending_discard)
Bug fixes:
- try not to expose unwritten blocks to user by DIO (this was added
to avoid merge conflict; another patch is coming to address other
missing case)
- relax minor error condition for file pinning feature used in
Android OTA
- fix potential deadlock case in compression flow
- should not truncate any block on pinned file
In addition, we've done some code clean-ups and tracepoint/sanity
check improvement"
* tag 'f2fs-for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (29 commits)
f2fs: do not allow partial truncation on pinned file
f2fs: remove redunant invalidate compress pages
f2fs: Simplify bool conversion
f2fs: don't drop compressed page cache in .{invalidate,release}page
f2fs: fix to reserve space for IO align feature
f2fs: fix to check available space of CP area correctly in update_ckpt_flags()
f2fs: support fault injection to f2fs_trylock_op()
f2fs: clean up __find_inline_xattr() with __find_xattr()
f2fs: fix to do sanity check on last xattr entry in __f2fs_setxattr()
f2fs: do not bother checkpoint by f2fs_get_node_info
f2fs: avoid down_write on nat_tree_lock during checkpoint
f2fs: compress: fix potential deadlock of compress file
f2fs: avoid EINVAL by SBI_NEED_FSCK when pinning a file
f2fs: add gc_urgent_high_remaining sysfs node
f2fs: fix to do sanity check in is_alive()
f2fs: fix to avoid panic in is_alive() if metadata is inconsistent
f2fs: fix to do sanity check on inode type during garbage collection
f2fs: avoid duplicate call of mark_inode_dirty
f2fs: show number of pending discard commands
f2fs: support POSIX_FADV_DONTNEED drop compressed page cache
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode updates from Gabriel Krisman Bertazi:
"This includes patches from Christoph Hellwig to split the large data
tables of the unicode subsystem into a loadable module, which allow
users to not have them around if case-insensitive filesystems are not
to be used. It also includes minor code fixes to unicode and its
users, from the same author.
All the patches here have been on linux-next releases for the past
months"
* tag 'unicode-for-next-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: only export internal symbols for the selftests
unicode: Add utf8-data module
unicode: cache the normalization tables in struct unicode_map
unicode: move utf8cursor to utf8-selftest.c
unicode: simplify utf8len
unicode: remove the unused utf8{,n}age{min,max} functions
unicode: pass a UNICODE_AGE() tripple to utf8_load
unicode: mark the version field in struct unicode_map unsigned
unicode: remove the charset field from struct unicode_map
f2fs: simplify f2fs_sb_read_encoding
ext4: simplify ext4_sb_read_encoding
|
|
Merge misc updates from Andrew Morton:
"146 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
mm/damon: hide kernel pointer from tracepoint event
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
mm/damon/dbgfs: remove an unnecessary variable
mm/damon: move the implementation of damon_insert_region to damon.h
mm/damon: add access checking for hugetlb pages
Docs/admin-guide/mm/damon/usage: update for schemes statistics
mm/damon/dbgfs: support all DAMOS stats
Docs/admin-guide/mm/damon/reclaim: document statistics parameters
mm/damon/reclaim: provide reclamation statistics
mm/damon/schemes: account how many times quota limit has exceeded
mm/damon/schemes: account scheme actions that successfully applied
mm/damon: remove a mistakenly added comment for a future feature
Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
Docs/admin-guide/mm/damon/usage: remove redundant information
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
mm/damon: convert macro functions to static inline functions
mm/damon: modify damon_rand() macro to static inline function
mm/damon: move damon_rand() definition into damon.h
...
|
|
find_first{,_zero}_bit is a more effective analogue of 'next' version if
start == 0. This patch replaces 'next' with 'first' where things look
trivial.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Various places in the kernel - largely in filesystems - respond to a
memory allocation failure by looping around and re-trying. Some of
these cannot conveniently use __GFP_NOFAIL, for reasons such as:
- a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on
- a need to check for the process being signalled between failures
- the possibility that other recovery actions could be performed
- the allocation is quite deep in support code, and passing down an
extra flag to say if __GFP_NOFAIL is wanted would be clumsy.
Many of these currently use congestion_wait() which (in almost all
cases) simply waits the given timeout - congestion isn't tracked for
most devices.
It isn't clear what the best delay is for loops, but it is clear that
the various filesystems shouldn't be responsible for choosing a timeout.
This patch introduces memalloc_retry_wait() with takes on that
responsibility. Code that wants to retry a memory allocation can call
this function passing the GFP flags that were used. It will wait
however is appropriate.
For now, it only considers __GFP_NORETRY and whatever
gfpflags_allow_blocking() tests. If blocking is allowed without
__GFP_NORETRY, then alloc_page either made some reclaim progress, or
waited for a while, before failing. So there is no need for much
further waiting. memalloc_retry_wait() will wait until the current
jiffie ends. If this condition is not met, then alloc_page() won't have
waited much if at all. In that case memalloc_retry_wait() waits about
200ms. This is the delay that most current loops uses.
linux/sched/mm.h needs to be included in some files now,
but linux/backing-dev.h does not.
Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If the pinned file has a hole by partial truncation, application that has
the block map will be broken.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
find_lock_entries() already only returned the head page of folios, so
convert it to return a folio_batch instead of a pagevec. That cascades
through converting truncate_inode_pages_range() to
delete_from_page_cache_batch() and page_cache_delete_batch().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
Compress page will invalidate in truncate block process too, so remove
redunant invalidate compress pages in f2fs_evict_inode.
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Fix the following coccicheck warning:
./fs/f2fs/sysfs.c:491:41-46: WARNING: conversion to bool not needed here
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
For compressed inode, in .{invalidate,release}page, we will call
f2fs_invalidate_compress_pages() to drop all compressed page cache of
current inode.
But we don't need to drop compressed page cache synchronously in
.invalidatepage, because, all trancation paths of compressed physical
block has been covered with f2fs_invalidate_compress_page().
And also we don't need to drop compressed page cache synchronously
in .releasepage, because, if there is out-of-memory, we can count
on page cache reclaim on sbi->compress_inode.
BTW, this patch may fix the issue reported below:
https://lore.kernel.org/linux-f2fs-devel/20211202092812.197647-1-changfengnan@vivo.com/T/#u
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
https://bugzilla.kernel.org/show_bug.cgi?id=204137
With below script, we will hit panic during new segment allocation:
DISK=bingo.img
MOUNT_DIR=/mnt/f2fs
dd if=/dev/zero of=$DISK bs=1M count=105
mkfs.f2fe -a 1 -o 19 -t 1 -z 1 -f -q $DISK
mount -t f2fs $DISK $MOUNT_DIR -o "noinline_dentry,flush_merge,noextent_cache,mode=lfs,io_bits=7,fsync_mode=strict"
for (( i = 0; i < 4096; i++ )); do
name=`head /dev/urandom | tr -dc A-Za-z0-9 | head -c 10`
mkdir $MOUNT_DIR/$name
done
umount $MOUNT_DIR
rm $DISK
--- Core dump ---
Call Trace:
allocate_segment_by_default+0x9d/0x100 [f2fs]
f2fs_allocate_data_block+0x3c0/0x5c0 [f2fs]
do_write_page+0x62/0x110 [f2fs]
f2fs_outplace_write_data+0x43/0xc0 [f2fs]
f2fs_do_write_data_page+0x386/0x560 [f2fs]
__write_data_page+0x706/0x850 [f2fs]
f2fs_write_cache_pages+0x267/0x6a0 [f2fs]
f2fs_write_data_pages+0x19c/0x2e0 [f2fs]
do_writepages+0x1c/0x70
__filemap_fdatawrite_range+0xaa/0xe0
filemap_fdatawrite+0x1f/0x30
f2fs_sync_dirty_inodes+0x74/0x1f0 [f2fs]
block_operations+0xdc/0x350 [f2fs]
f2fs_write_checkpoint+0x104/0x1150 [f2fs]
f2fs_sync_fs+0xa2/0x120 [f2fs]
f2fs_balance_fs_bg+0x33c/0x390 [f2fs]
f2fs_write_node_pages+0x4c/0x1f0 [f2fs]
do_writepages+0x1c/0x70
__writeback_single_inode+0x45/0x320
writeback_sb_inodes+0x273/0x5c0
wb_writeback+0xff/0x2e0
wb_workfn+0xa1/0x370
process_one_work+0x138/0x350
worker_thread+0x4d/0x3d0
kthread+0x109/0x140
ret_from_fork+0x25/0x30
The root cause here is, with IO alignment feature enables, in worst
case, we need F2FS_IO_SIZE() free blocks space for single one 4k write
due to IO alignment feature will fill dummy pages to make IO being
aligned.
So we will easily run out of free segments during non-inline directory's
data writeback, even in process of foreground GC.
In order to fix this issue, I just propose to reserve additional free
space for IO alignment feature to handle worst case of free space usage
ratio during FGGC.
Fixes: 0a595ebaaa6b ("f2fs: support IO alignment for DATA and NODE writes")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Otherwise, nat_bit area may be persisted across boundary of CP area during
nat_bit rebuilding.
Fixes: 94c821fb286b ("f2fs: rebuild nat_bits during umount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
f2fs: support fault injection for f2fs_trylock_op()
This patch supports to inject fault into f2fs_trylock_op().
Usage:
a) echo 65536 > /sys/fs/f2fs/<dev>/inject_type or
b) mount -o fault_type=65536 <dev> <mountpoint>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Just cleanup, no logic change.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As Wenqing Liu reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215235
- Overview
page fault in f2fs_setxattr() when mount and operate on corrupted image
- Reproduce
tested on kernel 5.16-rc3, 5.15.X under root
1. unzip tmp7.zip
2. ./single.sh f2fs 7
Sometimes need to run the script several times
- Kernel dump
loop0: detected capacity change from 0 to 131072
F2FS-fs (loop0): Found nat_bits in checkpoint
F2FS-fs (loop0): Mounted with checkpoint version = 7548c2ee
BUG: unable to handle page fault for address: ffffe47bc7123f48
RIP: 0010:kfree+0x66/0x320
Call Trace:
__f2fs_setxattr+0x2aa/0xc00 [f2fs]
f2fs_setxattr+0xfa/0x480 [f2fs]
__f2fs_set_acl+0x19b/0x330 [f2fs]
__vfs_removexattr+0x52/0x70
__vfs_removexattr_locked+0xb1/0x140
vfs_removexattr+0x56/0x100
removexattr+0x57/0x80
path_removexattr+0xa3/0xc0
__x64_sys_removexattr+0x17/0x20
do_syscall_64+0x37/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is in __f2fs_setxattr(), we missed to do sanity check on
last xattr entry, result in out-of-bound memory access during updating
inconsistent xattr data of target inode.
After the fix, it can detect such xattr inconsistency as below:
F2FS-fs (loop11): inode (7) has invalid last xattr entry, entry_size: 60676
F2FS-fs (loop11): inode (8) has corrupted xattr
F2FS-fs (loop11): inode (8) has corrupted xattr
F2FS-fs (loop11): inode (8) has invalid last xattr entry, entry_size: 47736
Cc: stable@vger.kernel.org
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch tries to mitigate lock contention between f2fs_write_checkpoint and
f2fs_get_node_info along with nat_tree_lock.
The idea is, if checkpoint is currently running, other threads that try to grab
nat_tree_lock would be better to wait for checkpoint.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Let's cache nat entry if there's no lock contention only.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
There is a potential deadlock between writeback process and a process
performing write_begin() or write_cache_pages() while trying to write
same compress file, but not compressable, as below:
[Process A] - doing checkpoint
[Process B] [Process C]
f2fs_write_cache_pages()
- lock_page() [all pages in cluster, 0-31]
- f2fs_write_multi_pages()
- f2fs_write_raw_pages()
- f2fs_write_single_data_page()
- f2fs_do_write_data_page()
- return -EAGAIN [f2fs_trylock_op() failed]
- unlock_page(page) [e.g., page 0]
- generic_perform_write()
- f2fs_write_begin()
- f2fs_prepare_compress_overwrite()
- prepare_compress_overwrite()
- lock_page() [e.g., page 0]
- lock_page() [e.g., page 1]
- lock_page(page) [e.g., page 0]
Since there is no compress process, it is no longer necessary to hold
locks on every pages in cluster within f2fs_write_raw_pages().
This patch changes f2fs_write_raw_pages() to release all locks first
and then perform write same as the non-compress file in
f2fs_write_cache_pages().
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Hyeong-Jun Kim <hj514.kim@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Android OTA failed due to SBI_NEED_FSCK flag when pinning the file. Let's avoid
it since we can do in-place-updates.
Cc: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Added a new sysfs node called gc_urgent_high_remaining. The user can
set the trial count limit for GC urgent high mode with this value. If
GC thread gets to the limit, the mode will turn back to GC normal mode.
By default, the value is zero, which means there is no limit like before.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In fuzzed image, SSA table may indicate that a data block belongs to
invalid node, which node ID is out-of-range (0, 1, 2 or max_nid), in
order to avoid migrating inconsistent data in such corrupted image,
let's do sanity check anyway before data block migration.
Cc: stable@vger.kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As report by Wenqing Liu in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215231
If we enable CONFIG_F2FS_CHECK_FS config, and with fuzzed image attached
in above link, we will encounter panic when executing below script:
1. mkdir mnt
2. mount -t f2fs tmp1.img mnt
3. touch tmp
F2FS-fs (loop11): mismatched blkaddr 5765 (source_blkaddr 1) in seg 3
kernel BUG at fs/f2fs/gc.c:1042!
do_garbage_collect+0x90f/0xa80 [f2fs]
f2fs_gc+0x294/0x12a0 [f2fs]
f2fs_balance_fs+0x2c5/0x7d0 [f2fs]
f2fs_create+0x239/0xd90 [f2fs]
lookup_open+0x45e/0xa90
open_last_lookups+0x203/0x670
path_openat+0xae/0x490
do_filp_open+0xbc/0x160
do_sys_openat2+0x2f1/0x500
do_sys_open+0x5e/0xa0
__x64_sys_openat+0x28/0x40
Previously, f2fs tries to catch data inconcistency exception in between
SSA and SIT table during GC, however once the exception is caught, it will
call f2fs_bug_on to hang kernel, it's not needed, instead, let's set
SBI_NEED_FSCK flag and skip migrating current block.
Fixes: bbf9f7d90f21 ("f2fs: Fix indefinite loop in f2fs_gc()")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As report by Wenqing Liu in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215231
- Overview
kernel NULL pointer dereference triggered in folio_mark_dirty() when mount and operate on a crafted f2fs image
- Reproduce
tested on kernel 5.16-rc3, 5.15.X under root
1. mkdir mnt
2. mount -t f2fs tmp1.img mnt
3. touch tmp
4. cp tmp mnt
F2FS-fs (loop0): sanity_check_inode: inode (ino=49) extent info [5942, 4294180864, 4] is incorrect, run fsck to fix
F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=31340049, run fsck to fix.
BUG: kernel NULL pointer dereference, address: 0000000000000000
folio_mark_dirty+0x33/0x50
move_data_page+0x2dd/0x460 [f2fs]
do_garbage_collect+0xc18/0x16a0 [f2fs]
f2fs_gc+0x1d3/0xd90 [f2fs]
f2fs_balance_fs+0x13a/0x570 [f2fs]
f2fs_create+0x285/0x840 [f2fs]
path_openat+0xe6d/0x1040
do_filp_open+0xc5/0x140
do_sys_openat2+0x23a/0x310
do_sys_open+0x57/0x80
The root cause is for special file: e.g. character, block, fifo or socket file,
f2fs doesn't assign address space operations pointer array for mapping->a_ops field,
so, in a fuzzed image, SSA table indicates a data block belong to special file, when
f2fs tries to migrate that block, it causes NULL pointer access once move_data_page()
calls a_ops->set_dirty_page().
Cc: stable@vger.kernel.org
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Let's check the condition first before set|clear bit.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This information can be used to check how much time we need to give to issue
all the discard commands.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Previously, compressed page cache drop when clean page cache, but
POSIX_FADV_DONTNEED can't clean compressed page cache because raw page
don't have private data, and won't call f2fs_invalidate_compress_pages.
This commit call f2fs_invalidate_compress_pages() directly in
f2fs_file_fadvise() for POSIX_FADV_DONTNEED case.
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Since compress inode not a regular file, generic_error_remove_page in
f2fs_invalidate_compress_pages will always be failed, set compress
inode as a regular file to fix it.
Fixes: 6ce19aff0b8c ("f2fs: compress: add compress_inode to cache compressed blocks")
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This prints more information of DIO in tracepoint.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Make f2fs_file_read_iter() and f2fs_file_write_iter() use the iomap
direct I/O implementation instead of the fs/direct-io.c one.
The iomap implementation is more efficient, and it also avoids the need
to add new features and optimizations to the old implementation.
This new implementation also eliminates the need for f2fs to hook bio
submission and completion and to allocate memory per-bio. This is
because it's possible to correctly update f2fs's in-flight DIO counters
using __iomap_dio_rw() in combination with an implementation of
iomap_dio_ops::end_io() (as suggested by Christoph Hellwig).
When possible, this new implementation preserves existing f2fs behavior
such as the conditions for falling back to buffered I/O.
This patch has been tested with xfstests by running 'gce-xfstests -c
f2fs -g auto -X generic/017' with and without this patch; no regressions
were seen. (Some tests fail both before and after. generic/017 hangs
both before and after, so it had to be excluded.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
[Jaegeuk Kim: use spin_lock_bh for f2fs_update_iostat in softirq]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Implement 'struct iomap_ops' for f2fs, in preparation for making f2fs
use iomap for direct I/O.
Note that this may be used for other things besides direct I/O in the
future; however, for now I've only tested it for direct I/O.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Pass in the original position and count rather than the position and
count that were updated by the write. Also use the correct types for
all arguments, in particular the file offset which was being truncated
to 32 bits on 32-bit platforms.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
DIO preallocates physical blocks before writing data, but if an error occurrs
or power-cut happens, we can see block contents from the disk. This patch tries
to fix it by 1) turning to buffered writes for DIO into holes, 2) truncating
unwritten blocks from error or power-cut.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Replace 'if (ret > 0)' with 'if (ret <= 0) goto out_unlock;'.
No change in behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
f2fs_write_begin() assumes that all blocks were preallocated by
default unless FI_NO_PREALLOC is explicitly set. This invites data
corruption, as there are cases in which not all blocks are preallocated.
Commit 47501f87c61a ("f2fs: preallocate DIO blocks when forcing
buffered_io") fixed one case, but there are others remaining.
Fix up this logic by replacing this flag with FI_PREALLOCATED_ALL, which
only gets set if all blocks for the current write were preallocated.
Also clean up f2fs_preallocate_blocks(), move it to file.c, and make it
handle some of the logic that was previously in write_iter() directly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Don't alloc new page pointers array to replace old, just use old, introduce
valid_nr_cpages to indicate valid number of page pointers in array, try to
reduce one page array alloc and free when write compress page.
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Pull zstd update from Nick Terrell:
"Update to zstd-1.4.10.
Add myself as the maintainer of zstd and update the zstd version in
the kernel, which is now 4 years out of date, to a much more recent
zstd release. This includes bug fixes, much more extensive fuzzing,
and performance improvements. And generates the kernel zstd
automatically from upstream zstd, so it is easier to keep the zstd
verison up to date, and we don't fall so far out of date again.
This includes 5 commits that update the zstd library version:
- Adds a new kernel-style wrapper around zstd.
This wrapper API is functionally equivalent to the subset of the
current zstd API that is currently used. The wrapper API changes to
be kernel style so that the symbols don't collide with zstd's
symbols. The update to zstd-1.4.10 maintains the same API and
preserves the semantics, so that none of the callers need to be
updated. All callers are updated in the commit, because there are
zero functional changes.
- Adds an indirection for `lib/decompress_unzstd.c` so it doesn't
depend on the layout of `lib/zstd/` to include every source file.
This allows the next patch to be automatically generated.
- Imports the zstd-1.4.10 source code. This commit is automatically
generated from upstream zstd (https://github.com/facebook/zstd).
- Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`.
- Fixes a newly added build warning for clang.
The discussion around this patchset has been pretty long, so I've
included a FAQ-style summary of the history of the patchset, and why
we are taking this approach.
Why do we need to update?
-------------------------
The zstd version in the kernel is based off of zstd-1.3.1, which is
was released August 20, 2017. Since then zstd has seen many bug fixes
and performance improvements. And, importantly, upstream zstd is
continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to
older versions. So the only way to sanely get these fixes is to keep
up to date with upstream zstd.
There are no known security issues that affect the kernel, but we need
to be able to update in case there are. And while there are no known
security issues, there are relevant bug fixes. For example the problem
with large kernel decompression has been fixed upstream for over 2
years [1]
Additionally the performance improvements for kernel use cases are
significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz:
- BtrFS zstd compression at levels 1 and 3 is 5% faster
- BtrFS zstd decompression+read is 15% faster
- SquashFS zstd decompression+read is 15% faster
- F2FS zstd compression+write at level 3 is 8% faster
- F2FS zstd decompression+read is 20% faster
- ZRAM decompression+read is 30% faster
- Kernel zstd decompression is 35% faster
- Initramfs zstd decompression+build is 5% faster
On top of this, there are significant performance improvements coming
down the line in the next zstd release, and the new automated update
patch generation will allow us to pull them easily.
How is the update patch generated?
----------------------------------
The first two patches are preparation for updating the zstd version.
Then the 3rd patch in the series imports upstream zstd into the
kernel. This patch is automatically generated from upstream. A script
makes the necessary changes and imports it into the kernel. The
changes are:
- Replace all libc dependencies with kernel replacements and rewrite
includes.
- Remove unncessary portability macros like: #if defined(_MSC_VER).
- Use the kernel xxhash instead of bundling it.
This automation gets tested every commit by upstream's continuous
integration. When we cut a new zstd release, we will submit a patch to
the kernel to update the zstd version in the kernel.
The automated process makes it easy to keep the kernel version of zstd
up to date. The current zstd in the kernel shares the guts of the
code, but has a lot of API and minor changes to work in the kernel.
This is because at the time upstream zstd was not ready to be used in
the kernel envrionment as-is. But, since then upstream zstd has
evolved to support being used in the kernel as-is.
Why are we updating in one big patch?
-------------------------------------
The 3rd patch in the series is very large. This is because it is
restructuring the code, so it both deletes the existing zstd, and
re-adds the new structure. Future updates will be directly
proportional to the changes in upstream zstd since the last import.
They will admittidly be large, as zstd is an actively developed
project, and has hundreds of commits between every release. However,
there is no other great alternative.
One option ruled out is to replay every upstream zstd commit. This is
not feasible for several reasons:
- There are over 3500 upstream commits since the zstd version in the
kernel.
- The automation to automatically generate the kernel update was only
added recently, so older commits cannot easily be imported.
- Not every upstream zstd commit builds.
- Only zstd releases are "supported", and individual commits may have
bugs that were fixed before a release.
Another option to reduce the patch size would be to first reorganize
to the new file structure, and then apply the patch. However, the
current kernel zstd is formatted with clang-format to be more
"kernel-like". But, the new method imports zstd as-is, without
additional formatting, to allow for closer correlation with upstream,
and easier debugging. So the patch wouldn't be any smaller.
It also doesn't make sense to import upstream zstd commit by commit
going forward. Upstream zstd doesn't support production use cases
running of the development branch. We have a lot of post-commit
fuzzing that catches many bugs, so indiviudal commits may be buggy,
but fixed before a release. So going forward, I intend to import every
(important) zstd release into the Kernel.
So, while it isn't ideal, updating in one big patch is the only patch
I see forward.
Who is responsible for this code?
---------------------------------
I am. This patchset adds me as the maintainer for zstd. Previously,
there was no tree for zstd patches. Because of that, there were
several patches that either got ignored, or took a long time to merge,
since it wasn't clear which tree should pick them up. I'm officially
stepping up as maintainer, and setting up my tree as the path through
which zstd patches get merged. I'll make sure that patches to the
kernel zstd get ported upstream, so they aren't erased when the next
version update happens.
How is this code tested?
------------------------
I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS,
Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and
aarch64. I checked both performance and correctness.
Also, thanks to many people in the community who have tested these
patches locally.
Lastly, this code will bake in linux-next before being merged into
v5.16.
Why update to zstd-1.4.10 when zstd-1.5.0 has been released?
------------------------------------------------------------
This patchset has been outstanding since 2020, and zstd-1.4.10 was the
latest release when it was created. Since the update patch is
automatically generated from upstream, I could generate it from
zstd-1.5.0.
However, there were some large stack usage regressions in zstd-1.5.0,
and are only fixed in the latest development branch. And the latest
development branch contains some new code that needs to bake in the
fuzzer before I would feel comfortable releasing to the kernel.
Once this patchset has been merged, and we've released zstd-1.5.1, we
can update the kernel to zstd-1.5.1, and exercise the update process.
You may notice that zstd-1.4.10 doesn't exist upstream. This release
is an artifical release based off of zstd-1.4.9, with some fixes for
the kernel backported from the development branch. I will tag the
zstd-1.4.10 release after this patchset is merged, so the Linux Kernel
is running a known version of zstd that can be debugged upstream.
Why was a wrapper API added?
----------------------------
The first versions of this patchset migrated the kernel to the
upstream zstd API. It first added a shim API that supported the new
upstream API with the old code, then updated callers to use the new
shim API, then transitioned to the new code and deleted the shim API.
However, Cristoph Hellwig suggested that we transition to a kernel
style API, and hide zstd's upstream API behind that. This is because
zstd's upstream API is supports many other use cases, and does not
follow the kernel style guide, while the kernel API is focused on the
kernel's use cases, and follows the kernel style guide.
Where is the previous discussion?
---------------------------------
Links for the discussions of the previous versions of the patch set
below. The largest changes in the design of the patchset are driven by
the discussions in v11, v5, and v1. Sorry for the mix of links, I
couldn't find most of the the threads on lkml.org"
Link: https://lkml.org/lkml/2020/9/29/27 [1]
Link: https://www.spinics.net/lists/linux-crypto/msg58189.html [v12]
Link: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/ [v11]
Link: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/ [v10]
Link: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/ [v9]
Link: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/ [v8]
Link: https://lkml.org/lkml/2020/12/3/1195 [v7]
Link: https://lkml.org/lkml/2020/12/2/1245 [v6]
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v5]
Link: https://www.spinics.net/lists/linux-btrfs/msg105783.html [v4]
Link: https://lkml.org/lkml/2020/9/23/1074 [v3]
Link: https://www.spinics.net/lists/linux-btrfs/msg105505.html [v2]
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v1]
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
* tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux:
lib: zstd: Add cast to silence clang's -Wbitwise-instead-of-logical
MAINTAINERS: Add maintainer entry for zstd
lib: zstd: Upgrade to latest upstream zstd version 1.4.10
lib: zstd: Add decompress_sources.h for decompress_unzstd
lib: zstd: Add kernel-specific API
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we've applied relatively small number of patches which
fix subtle corner cases mainly, while introducing a new mount option
to be able to fragment the disk intentionally for performance tests.
Enhancements:
- add a mount option to fragmente on-disk layout to understand the
performance
- support direct IO for multi-partitions
- add a fault injection of dquot_initialize
Bug fixes:
- address some lockdep complaints
- fix a deadlock issue with quota
- fix a memory tuning condition
- fix compression condition to improve the ratio
- fix disabling compression on the non-empty compressed file
- invalidate cached pages before IPU/DIO writes
And, we've added some minor clean-ups as usual"
* tag 'f2fs-for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: fix UAF in f2fs_available_free_memory
f2fs: invalidate META_MAPPING before IPU/DIO write
f2fs: support fault injection for dquot_initialize()
f2fs: fix incorrect return value in f2fs_sanity_check_ckpt()
f2fs: compress: disallow disabling compress on non-empty compressed file
f2fs: compress: fix overwrite may reduce compress ratio unproperly
f2fs: multidevice: support direct IO
f2fs: introduce fragment allocation mode mount option
f2fs: replace snprintf in show functions with sysfs_emit
f2fs: include non-compressed blocks in compr_written_block
f2fs: fix wrong condition to trigger background checkpoint correctly
f2fs: fix to use WHINT_MODE
f2fs: fix up f2fs_lookup tracepoints
f2fs: set SBI_NEED_FSCK flag when inconsistent node block found
f2fs: introduce excess_dirty_threshold()
f2fs: avoid attaching SB_ACTIVE flag during mount
f2fs: quota: fix potential deadlock
f2fs: should use GFP_NOFS for directory inodes
|
|
if2fs_fill_super
-> f2fs_build_segment_manager
-> create_discard_cmd_control
-> f2fs_start_discard_thread
It invokes kthread_run to create a thread and run issue_discard_thread.
However, if f2fs_build_node_manager fails, the control flow goes to
free_nm and calls f2fs_destroy_node_manager. This function will free
sbi->nm_info. However, if issue_discard_thread accesses sbi->nm_info
after the deallocation, but before the f2fs_stop_discard_thread, it will
cause UAF(Use-after-free).
-> f2fs_destroy_segment_manager
-> destroy_discard_cmd_control
-> f2fs_stop_discard_thread
Fix this by stopping discard thread before f2fs_destroy_node_manager.
Note that, the commit d6d2b491a82e1 introduces the call of
f2fs_available_free_memory into issue_discard_thread.
Cc: stable@vger.kernel.org
Fixes: d6d2b491a82e ("f2fs: allow to change discard policy based on cached discard cmds")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Encrypted pages during GC are read and cached in META_MAPPING.
However, due to cached pages in META_MAPPING, there is an issue where
newly written pages are lost by IPU or DIO writes.
Thread A - f2fs_gc() Thread B
/* phase 3 */
down_write(i_gc_rwsem)
ra_data_block() ---- (a)
up_write(i_gc_rwsem)
f2fs_direct_IO() :
- down_read(i_gc_rwsem)
- __blockdev_direct_io()
- get_data_block_dio_write()
- f2fs_dio_submit_bio() ---- (b)
- up_read(i_gc_rwsem)
/* phase 4 */
down_write(i_gc_rwsem)
move_data_block() ---- (c)
up_write(i_gc_rwsem)
(a) In phase 3 of f2fs_gc(), up-to-date page is read from storage and
cached in META_MAPPING.
(b) In thread B, writing new data by IPU or DIO write on same blkaddr as
read in (a). cached page in META_MAPPING become out-dated.
(c) In phase 4 of f2fs_gc(), out-dated page in META_MAPPING is copied to
new blkaddr. In conclusion, the newly written data in (b) is lost.
To address this issue, invalidating pages in META_MAPPING before IPU or
DIO write.
Fixes: 6aa58d8ad20a ("f2fs: readahead encrypted block during GC")
Signed-off-by: Hyeong-Jun Kim <hj514.kim@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch:
- Moves `include/linux/zstd.h` -> `include/linux/zstd_lib.h`
- Updates modified zstd headers to yearless copyright
- Adds a new API in `include/linux/zstd.h` that is functionally
equivalent to the in-use subset of the current API. Functions are
renamed to avoid symbol collisions with zstd, to make it clear it is
not the upstream zstd API, and to follow the kernel style guide.
- Updates all callers to use the new API.
There are no functional changes in this patch. Since there are no
functional change, I felt it was okay to update all the callers in a
single patch. Once the API is approved, the callers are mechanically
changed.
This patch is preparing for the 3rd patch in this series, which updates
zstd to version 1.4.10. Since the upstream zstd API is no longer exposed
to callers, the update can happen transparently.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 mmap + page fault deadlocks fixes from Andreas Gruenbacher:
"Functions gfs2_file_read_iter and gfs2_file_write_iter are both
accessing the user buffer to write to or read from while holding the
inode glock.
In the most basic deadlock scenario, that buffer will not be resident
and it will be mapped to the same file. Accessing the buffer will
trigger a page fault, and gfs2 will deadlock trying to take the same
inode glock again while trying to handle that fault.
Fix that and similar, more complex scenarios by disabling page faults
while accessing user buffers. To make this work, introduce a small
amount of new infrastructure and fix some bugs that didn't trigger so
far, with page faults enabled"
* tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix mmap + page fault deadlocks for direct I/O
iov_iter: Introduce nofault flag to disable page faults
gup: Introduce FOLL_NOFAULT flag to disable page faults
iomap: Add done_before argument to iomap_dio_rw
iomap: Support partial direct I/O on user copy failures
iomap: Fix iomap_dio_rw return value for user copies
gfs2: Fix mmap + page fault deadlocks for buffered I/O
gfs2: Eliminate ip->i_gh
gfs2: Move the inode glock locking to gfs2_file_buffered_write
gfs2: Introduce flag for glock holder auto-demotion
gfs2: Clean up function may_grant
gfs2: Add wrapper for iomap_file_buffered_write
iov_iter: Introduce fault_in_iov_iter_writeable
iov_iter: Turn iov_iter_fault_in_readable into fault_in_iov_iter_readable
gup: Turn fault_in_pages_{readable,writeable} into fault_in_{readable,writeable}
powerpc/kvm: Fix kvm_use_magic_page
iov_iter: Fix iov_iter_get_pages{,_alloc} page fault return value
|
|
Pull fscrypt updates from Eric Biggers:
"Some cleanups for fs/crypto/:
- Allow 256-bit master keys with AES-256-XTS
- Improve documentation and comments
- Remove unneeded field fscrypt_operations::max_namelen"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: improve a few comments
fscrypt: allow 256-bit master keys with AES-256-XTS
fscrypt: improve documentation for inline encryption
fscrypt: clean up comments in bio.c
fscrypt: remove fscrypt_operations::max_namelen
|
|
This patch adds a new function f2fs_dquot_initialize() to wrap
dquot_initialize(), and it supports to inject fault into
f2fs_dquot_initialize() to simulate inner failure occurs in
dquot_initialize().
Usage:
a) echo 65536 > /sys/fs/f2fs/<dev>/inject_type or
b) mount -o fault_type=65536 <dev> <mountpoint>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As Pavel Machek reported in [1]
This code looks quite confused: part of function returns 1 on
corruption, part returns -errno. The problem is not stable-specific.
[1] https://lkml.org/lkml/2021/9/19/207
Let's fix to make 'insane cp_payload case' to return 1 rater than
EFSCORRUPTED, so that return value can be kept consistent for all
error cases, it can avoid confusion of code logic.
Fixes: 65ddf6564843 ("f2fs: fix to do sanity check for sb/cp fields correctly")
Reported-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Compresse file and normal file has differ in i_addr addressing,
specifically addrs per inode/block. So, we will face data loss, if we
disable the compression flag on non-empty files. Therefore we should
disallow not only enabling but disabling the compression flag on
non-empty files.
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Hyeong-Jun Kim <hj514.kim@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
when overwrite only first block of cluster, since cluster is not full, it
will call f2fs_write_raw_pages when f2fs_write_multi_pages, and cause the
whole cluster become uncompressed eventhough data can be compressed.
this may will make random write bench score reduce a lot.
root# dd if=/dev/zero of=./fio-test bs=1M count=1
root# sync
root# echo 3 > /proc/sys/vm/drop_caches
root# f2fs_io get_cblocks ./fio-test
root# dd if=/dev/zero of=./fio-test bs=4K count=1 oflag=direct conv=notrunc
w/o patch:
root# f2fs_io get_cblocks ./fio-test
189
w/ patch:
root# f2fs_io get_cblocks ./fio-test
192
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Commit 3c62be17d4f5 ("f2fs: support multiple devices") missed
to support direct IO for multiple device feature, this patch
adds to support the missing part of multidevice feature.
In addition, for multiple device image, we should be aware of
any issued direct write IO rather than just buffered write IO,
so that fsync and syncfs can issue a preflush command to the
device where direct write IO goes, to persist user data for
posix compliant.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Added two options into "mode=" mount option to make it possible for
developers to simulate filesystem fragmentation/after-GC situation
itself. The developers use these modes to understand filesystem
fragmentation/after-GC condition well, and eventually get some
insights to handle them better.
"fragment:segment": f2fs allocates a new segment in ramdom position.
With this, we can simulate the after-GC condition.
"fragment:block" : We can scatter block allocation with
"max_fragment_chunk" and "max_fragment_hole" sysfs
nodes. f2fs will allocate 1..<max_fragment_chunk>
blocks in a chunk and make a hole in the length of
1..<max_fragment_hole> by turns in a newly allocated
free segment. Plus, this mode implicitly enables
"fragment:segment" option for more randomness.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
