| Age | Commit message (Collapse) | Author |
|---|
|
When an afs file or directory is modified locally such that the total file
size is extended, i_blocks needs to be recalculated too.
Fix this by making afs_write_end() and afs_edit_dir_add() call
afs_set_i_size() rather than setting inode->i_size directly as that also
recalculates inode->i_blocks.
This can be tested by creating and writing into directories and files and
then examining them with du. Without this change, directories show a 4
blocks (they start out at 2048 bytes) and files show 0 blocks; with this
change, they should show a number of blocks proportional to the file size
rounded up to 1024.
Fixes: 31143d5d515e ("AFS: implement basic file write support")
Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163113612442.352844.11162345591911691150.stgit@warthog.procyon.org.uk/
|
|
AFS-3 has two data fetch RPC variants, FS.FetchData and FS.FetchData64, and
Linux's afs client switches between them when talking to a non-YFS server
if the read size, the file position or the sum of the two have the upper 32
bits set of the 64-bit value.
This is a problem, however, since the file position and length fields of
FS.FetchData are *signed* 32-bit values.
Fix this by capturing the capability bits obtained from the fileserver when
it's sent an FS.GetCapabilities RPC, rather than just discarding them, and
then picking out the VICED_CAPABILITY_64BITFILES flag. This can then be
used to decide whether to use FS.FetchData or FS.FetchData64 - and also
FS.StoreData or FS.StoreData64 - rather than using upper_32_bits() to
switch on the parameter values.
This capabilities flag could also be used to limit the maximum size of the
file, but all servers must be checked for that.
Note that the issue does not exist with FS.StoreData - that uses *unsigned*
32-bit values. It's also not a problem with Auristor servers as its
YFS.FetchData64 op uses unsigned 64-bit values.
This can be tested by cloning a git repo through an OpenAFS client to an
OpenAFS server and then doing "git status" on it from a Linux afs
client[1]. Provided the clone has a pack file that's in the 2G-4G range,
the git status will show errors like:
error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index
error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index
This can be observed in the server's FileLog with something like the
following appearing:
Sun Aug 29 19:31:39 2021 SRXAFS_FetchData, Fid = 2303380852.491776.3263114, Host 192.168.11.201:7001, Id 1001
Sun Aug 29 19:31:39 2021 CheckRights: len=0, for host=192.168.11.201:7001
Sun Aug 29 19:31:39 2021 FetchData_RXStyle: Pos 18446744071815340032, Len 3154
Sun Aug 29 19:31:39 2021 FetchData_RXStyle: file size 2400758866
...
Sun Aug 29 19:31:40 2021 SRXAFS_FetchData returns 5
Note the file position of 18446744071815340032. This is the requested file
position sign-extended.
Fixes: b9b1f8d5930a ("AFS: write support fixes")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
cc: openafs-devel@openafs.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214217#c9 [1]
Link: https://lore.kernel.org/r/951332.1631308745@warthog.procyon.org.uk/
|
|
Try to avoid taking the RCU read lock when checking the validity of a
vnode's callback state. The only thing it's needed for is to pin the
parent volume's server list whilst we search it to find the record of the
server we're currently using to see if it has been reinitialised (ie. it
sent us a CB.InitCallBackState* RPC).
Do this by the following means:
(1) Keep an additional per-cell counter (fs_s_break) that's incremented
each time any of the fileservers in the cell reinitialises.
Since the new counter can be accessed without RCU from the vnode, we
can check that first - and only if it differs, get the RCU read lock
and check the volume's server list.
(2) Replace afs_get_s_break_rcu() with afs_check_server_good() which now
indicates whether the callback promise is still expected to be present
on the server. This does the checks as described in (1).
(3) Restructure afs_check_validity() to take account of the change in (2).
We can also get rid of the valid variable and just use the need_clear
variable with the addition of the afs_cb_break_no_promise reason.
(4) afs_check_validity() probably shouldn't be altering vnode->cb_v_break
and vnode->cb_s_break when it doesn't have cb_lock exclusively locked.
Move the change to vnode->cb_v_break to __afs_break_callback().
Delegate the change to vnode->cb_s_break to afs_select_fileserver()
and set vnode->cb_fs_s_break there also.
(5) afs_validate() no longer needs to get the RCU read lock around its
call to afs_check_validity() - and can skip the call entirely if we
don't have a promise.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163111669583.283156.1397603105683094563.stgit@warthog.procyon.org.uk/
|
|
Fix the coherency management of mmap'd data such that 3rd-party changes
become visible as soon as possible after the callback notification is
delivered by the fileserver. This is done by the following means:
(1) When we break a callback on a vnode specified by the CB.CallBack call
from the server, we queue a work item (vnode->cb_work) to go and
clobber all the PTEs mapping to that inode.
This causes the CPU to trip through the ->map_pages() and
->page_mkwrite() handlers if userspace attempts to access the page(s)
again.
(Ideally, this would be done in the service handler for CB.CallBack,
but the server is waiting for our reply before considering, and we
have a list of vnodes, all of which need breaking - and the process of
getting the mmap_lock and stripping the PTEs on all CPUs could be
quite slow.)
(2) Call afs_validate() from the ->map_pages() handler to check to see if
the file has changed and to get a new callback promise from the
server.
Also handle the fileserver telling us that it's dropping all callbacks,
possibly after it's been restarted by sending us a CB.InitCallBackState*
call by the following means:
(3) Maintain a per-cell list of afs files that are currently mmap'd
(cell->fs_open_mmaps).
(4) Add a work item to each server that is invoked if there are any open
mmaps when CB.InitCallBackState happens. This work item goes through
the aforementioned list and invokes the vnode->cb_work work item for
each one that is currently using this server.
This causes the PTEs to be cleared, causing ->map_pages() or
->page_mkwrite() to be called again, thereby calling afs_validate()
again.
I've chosen to simply strip the PTEs at the point of notification reception
rather than invalidate all the pages as well because (a) it's faster, (b)
we may get a notification for other reasons than the data being altered (in
which case we don't want to clobber the pagecache) and (c) we need to ask
the server to find out - and I don't want to wait for the reply before
holding up userspace.
This was tested using the attached test program:
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/mman.h>
int main(int argc, char *argv[])
{
size_t size = getpagesize();
unsigned char *p;
bool mod = (argc == 3);
int fd;
if (argc != 2 && argc != 3) {
fprintf(stderr, "Format: %s <file> [mod]\n", argv[0]);
exit(2);
}
fd = open(argv[1], mod ? O_RDWR : O_RDONLY);
if (fd < 0) {
perror(argv[1]);
exit(1);
}
p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ,
MAP_SHARED, fd, 0);
if (p == MAP_FAILED) {
perror("mmap");
exit(1);
}
for (;;) {
if (mod) {
p[0]++;
msync(p, size, MS_ASYNC);
fsync(fd);
}
printf("%02x", p[0]);
fflush(stdout);
sleep(1);
}
}
It runs in two modes: in one mode, it mmaps a file, then sits in a loop
reading the first byte, printing it and sleeping for a second; in the
second mode it mmaps a file, then sits in a loop incrementing the first
byte and flushing, then printing and sleeping.
Two instances of this program can be run on different machines, one doing
the reading and one doing the writing. The reader should see the changes
made by the writer, but without this patch, they aren't because validity
checking is being done lazily - only on entry to the filesystem.
Testing the InitCallBackState change is more complicated. The server has
to be taken offline, the saved callback state file removed and then the
server restarted whilst the reading-mode program continues to run. The
client machine then has to poke the server to trigger the InitCallBackState
call.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/
|
|
The AFS filesystem is currently triggering the silly-rename cleanup from
afs_d_revalidate() when it sees that a dentry has been changed by a third
party[1]. It should not be doing this as the cleanup includes deleting the
silly-rename target file on iput.
Fix this by removing the places in the d_revalidate handling that validate
anything other than the directory and the dirent. It probably should not
be looking to validate the target inode of the dentry also.
This includes removing the point in afs_d_revalidate() where the inode that
a dentry used to point to was marked as being deleted (AFS_VNODE_DELETED).
We don't know it got deleted. It could have been renamed or it could have
hard links remaining.
This was reproduced by cloning a git repo onto an afs volume on one
machine, switching to another machine and doing "git status", then
switching back to the first and doing "git status". The second status
would show weird output due to ".git/index" getting deleted by the above
mentioned mechanism.
A simpler way to do it is to do:
machine 1: touch a
machine 2: touch b; mv -f b a
machine 1: stat a
on an afs volume. The bug shows up as the stat failing with ENOENT and the
file server log showing that machine 1 deleted "a".
Fixes: 79ddbfa500b3 ("afs: Implement sillyrename for unlink and rename")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214217#c4 [1]
Link: https://lore.kernel.org/r/163111668100.283156.3851669884664475428.stgit@warthog.procyon.org.uk/
|
|
afs_d_revalidate() should only be validating the directory entry it is
given and the directory to which that belongs; it shouldn't be validating
the inode/vnode to which that dentry points. Besides, validation need to
be done even if we don't call afs_d_revalidate() - which might be the case
if we're starting from a file descriptor.
In order for afs_d_revalidate() to be fixed, validation points must be
added in some other places. Certain directory operations, such as
afs_unlink(), already check this, but not all and not all file operations
either.
Note that the validation of a vnode not only checks to see if the
attributes we have are correct, but also gets a promise from the server to
notify us if that file gets changed by a third party.
Add the following checks:
- Check the vnode we're going to make a hard link to.
- Check the vnode we're going to move/rename.
- Check the vnode we're going to read from.
- Check the vnode we're going to write to.
- Check the vnode we're going to sync.
- Check the vnode we're going to make a mapped page writable for.
Some of these aren't strictly necessary as we're going to perform a server
operation that might get the attributes anyway from which we can determine
if something changed - though it might not get us a callback promise.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163111667354.283156.12720698333342917516.stgit@warthog.procyon.org.uk/
|
|
There's a loop in afs_extend_writeback() that adds extra pages to a write
we want to make to improve the efficiency of the writeback by making it
larger. This loop stops, however, if we hit a page we can't write back
from immediately, but it doesn't get rid of the page ref we speculatively
acquired.
This was caused by the removal of the cleanup loop when the code switched
from using find_get_pages_contig() to xarray scanning as the latter only
gets a single page at a time, not a batch.
Fix this by putting the page on a ref on an early break from the loop.
Unfortunately, we can't just add that page to the pagevec we're employing
as we'll go through that and add those pages to the RPC call.
This was found by the generic/074 test. It leaks ~4GiB of RAM each time it
is run - which can be observed with "top".
Fixes: e87b03f5830e ("afs: Prepare for use of THPs")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163111666635.283156.177701903478910460.stgit@warthog.procyon.org.uk/
|
|
The afs_read objects created by afs_req_issue_op() get leaked because
afs_alloc_read() returns a ref and then afs_fetch_data() gets its own ref
which is released when the operation completes, but the initial ref is
never released.
Fix this by discarding the initial ref at the end of afs_req_issue_op().
This leak also covered another bug whereby a ref isn't got on the key
attached to the read record by afs_req_issue_op(). This isn't a problem as
long as the afs_read req never goes away...
Fix this by calling key_get() in afs_req_issue_op().
This was found by the generic/074 test. It leaks a bunch of kmalloc-192
objects each time it is run, which can be observed by watching
/proc/slabinfo.
Fixes: f7605fa869cf ("afs: Fix leak of afs_read objects")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163010394740.3035676.8516846193899793357.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/163111665914.283156.3038561975681836591.stgit@warthog.procyon.org.uk/
|
|
We added CONFIG_MANDATORY_FILE_LOCKING in 2015, and soon after turned it
off in Fedora and RHEL8. Several other distros have followed suit.
I've heard of one problem in all that time: Someone migrated from an
older distro that supported "-o mand" to one that didn't, and the host
had a fstab entry with "mand" in it which broke on reboot. They didn't
actually _use_ mandatory locking so they just removed the mount option
and moved on.
This patch rips out mandatory locking support wholesale from the kernel,
along with the Kconfig option and the Documentation file. It also
changes the mount code to ignore the "mand" mount option instead of
erroring out, and to throw a big, ugly warning.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
|
Variable ret is set to -ENOENT and -ENOMEM but this value is never
read as it is overwritten or not used later on, hence it is a
redundant assignment and can be removed.
Cleans up the following clang-analyzer warning:
fs/afs/dir.c:2014:4: warning: Value stored to 'ret' is never read
[clang-analyzer-deadcode.DeadStores].
fs/afs/dir.c:659:2: warning: Value stored to 'ret' is never read
[clang-analyzer-deadcode.DeadStores].
[DH made the following modifications:
- In afs_rename(), -ENOMEM should be placed in op->error instead of ret,
rather than the assignment being removed entirely. afs_put_operation()
will pick it up from there and return it.
- If afs_sillyrename() fails, its error code should be placed in op->error
rather than in ret also.
]
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/1619691492-83866-1-git-send-email-jiapeng.chong@linux.alibaba.com
Link: https://lore.kernel.org/r/162609465444.3133237.7562832521724298900.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/162610729052.3408253.17364333638838151299.stgit@warthog.procyon.org.uk/ # v2
|
|
Fix afs_writepages() to always set mapping->writeback_index to a page index
and not a byte position[1].
Fixes: 31143d5d515e ("AFS: implement basic file write support")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/CAB9dFdvHsLsw7CMnB+4cgciWDSqVjuij4mH3TaXnHQB8sz5rHw@mail.gmail.com/ [1]
Link: https://lore.kernel.org/r/162610728339.3408253.4604750166391496546.stgit@warthog.procyon.org.uk/ # v2 (no v1)
|
|
Static analysis reports this problem
write.c:773:29: warning: Assigned value is garbage or undefined
mapping->writeback_index = next;
^ ~~~~
The call to afs_writepages_region() can return without setting
next. So check the function return before using next.
Changes:
ver #2:
- Need to fix the range_cyclic case also[1].
Fixes: e87b03f5830e ("afs: Prepare for use of THPs")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20210430155031.3287870-1-trix@redhat.com
Link: https://lore.kernel.org/r/CAB9dFdvHsLsw7CMnB+4cgciWDSqVjuij4mH3TaXnHQB8sz5rHw@mail.gmail.com/ [1]
Link: https://lore.kernel.org/r/162609464716.3133237.10354897554363093252.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/162610727640.3408253.8687445613469681311.stgit@warthog.procyon.org.uk/ # v2
|
|
To quote Alexey[1]:
I was adding custom tracepoint to the kernel, grabbed full F34 kernel
.config, disabled modules and booted whole shebang as VM kernel.
Then did
perf record -a -e ...
It crashed:
general protection fault, probably for non-canonical address 0x435f5346592e4243: 0000 [#1] SMP PTI
CPU: 1 PID: 842 Comm: cat Not tainted 5.12.6+ #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
RIP: 0010:t_show+0x22/0xd0
Then reproducer was narrowed to
# cat /sys/kernel/tracing/printk_formats
Original F34 kernel with modules didn't crash.
So I started to disable options and after disabling AFS everything
started working again.
The root cause is that AFS was placing char arrays content into a
section full of _pointers_ to strings with predictable consequences.
Non canonical address 435f5346592e4243 is "CB.YFS_" which came from
CM_NAME macro.
Steps to reproduce:
CONFIG_AFS=y
CONFIG_TRACING=y
# cat /sys/kernel/tracing/printk_formats
Fix this by the following means:
(1) Add enum->string translation tables in the event header with the AFS
and YFS cache/callback manager operations listed by RPC operation ID.
(2) Modify the afs_cb_call tracepoint to print the string from the
translation table rather than using the string at the afs_call name
pointer.
(3) Switch translation table depending on the service we're being accessed
as (AFS or YFS) in the tracepoint print clause. Will this cause
problems to userspace utilities?
Note that the symbolic representation of the YFS service ID isn't
available to this header, so I've put it in as a number. I'm not sure
if this is the best way to do this.
(4) Remove the name wrangling (CM_NAME) macro and put the names directly
into the afs_call_type structs in cmservice.c.
Fixes: 8e8d7f13b6d5a9 ("afs: Add some tracepoints")
Reported-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/YLAXfvZ+rObEOdc%2F@localhost.localdomain/ [1]
Link: https://lore.kernel.org/r/643721.1623754699@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/162430903582.2896199.6098150063997983353.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/162609463957.3133237.15916579353149746363.stgit@warthog.procyon.org.uk/ # v1 (repost)
Link: https://lore.kernel.org/r/162610726860.3408253.445207609466288531.stgit@warthog.procyon.org.uk/ # v2
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfs fixes from David Howells:
"This contains patches to fix netfs_write_begin() and afs_write_end()
in the following ways:
(1) In netfs_write_begin(), extract the decision about whether to skip
a page out to its own helper and have that clear around the region
to be written, but not clear that region. This requires the
filesystem to patch it up afterwards if the hole doesn't get
completely filled.
(2) Use offset_in_thp() in (1) rather than manually calculating the
offset into the page.
(3) Due to (1), afs_write_end() now needs to handle short data write
into the page by generic_perform_write(). I've adopted an
analogous approach to ceph of just returning 0 in this case and
letting the caller go round again.
It also adds a note that (in the future) the len parameter may extend
beyond the page allocated. This is because the page allocation is
deferred to write_begin() and that gets to decide what size of THP to
allocate."
Jeff Layton points out:
"The netfs fix in particular fixes a data corruption bug in cephfs"
* tag 'netfs-fixes-20210621' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: fix test for whether we can skip read when writing beyond EOF
afs: Fix afs_write_end() to handle short writes
|
|
Fix afs_write_end() to correctly handle a short copy into the intended
write region of the page. Two things are necessary:
(1) If the page is not up to date, then we should just return 0
(ie. indicating a zero-length copy). The loop in
generic_perform_write() will go around again, possibly breaking up the
iterator into discrete chunks[1].
This is analogous to commit b9de313cf05fe08fa59efaf19756ec5283af672a
for ceph.
(2) The page should not have been set uptodate if it wasn't completely set
up by netfs_write_begin() (this will be fixed in the next patch), so
we need to set uptodate here in such a case.
Also remove the assertion that was checking that the page was set uptodate
since it's now set uptodate if it wasn't already a few lines above. The
assertion was from when uptodate was set elsewhere.
Changes:
v3: Remove the handling of len exceeding the end of the page.
Fixes: 3003bbd0697b ("afs: Use the netfs_write_begin() helper")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/YMwVp268KTzTf8cN@zeniv-ca.linux.org.uk/ [1]
Link: https://lore.kernel.org/r/162367682522.460125.5652091227576721609.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/162391825688.1173366.3437507255136307904.stgit@warthog.procyon.org.uk/ # v2
|
|
If a task is killed during a page fault, it does not currently call
sb_end_pagefault(), which means that the filesystem cannot be frozen
at any time thereafter. This may be reported by lockdep like this:
====================================
WARNING: fsstress/10757 still has locks held!
5.13.0-rc4-build4+ #91 Not tainted
------------------------------------
1 lock held by fsstress/10757:
#0: ffff888104eac530
(
sb_pagefaults
as filesystem freezing is modelled as a lock.
Fix this by removing all the direct returns from within the function,
and using 'ret' to indicate whether we were interrupted or successful.
Fixes: 1cf7a1518aef ("afs: Implement shared-writeable mmap")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20210616154900.1958373-1-willy@infradead.org/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The proc_symlink() function returns NULL on error, it doesn't return
error pointers.
Fixes: 5b86d4ff5dce ("afs: Implement network namespacing")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/YLjMRKX40pTrJvgf@mwanda/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In commit e87b03f5830e ("afs: Prepare for use of THPs"), the return
value for afs_write_back_from_locked_page was changed from a number
of pages to a length in bytes. The loop in afs_writepages_region uses
the return value to compute the index that will be used to find dirty
pages in the next iteration, but treats it as a number of pages and
wrongly multiplies it by PAGE_SIZE. This gives a very large index value,
potentially skipping any dirty data that was not covered in the first
pass, which is limited to 256M.
This causes fsync(), and indirectly close(), to only do a partial
writeback of a large file's dirty data. The rest is eventually written
back by background threads after dirty_expire_centisecs.
Fixes: e87b03f5830e ("afs: Prepare for use of THPs")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20210604175504.4055-1-marc.c.dionne@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix rename of one directory over another such that the nlink on the deleted
directory is cleared to 0 rather than being decremented to 1.
This was causing the generic/035 xfstest to fail.
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/162194384460.3999479.7605572278074191079.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple fallthrough pseudo-keywords in
places where the code is intended to fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-hardening@vger.kernel.org
Link: https://lore.kernel.org/r/51150b54e0b0431a2c401cd54f2c4e7f50e94601.1605896059.git.gustavoars@kernel.org/ # v1
Link: https://lore.kernel.org/r/20210420211615.GA51432@embeddedor/ # v2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The generic/464 xfstest causes kAFS to emit occasional warnings of the
form:
kAFS: vnode modified {100055:8a} 30->31 YFS.StoreData64 (c=6015)
This indicates that the data version received back from the server did not
match the expected value (the DV should be incremented monotonically for
each individual modification op committed to a vnode).
What is happening is that a lookup call is doing a bulk status fetch
speculatively on a bunch of vnodes in a directory besides getting the
status of the vnode it's actually interested in. This is racing with a
StoreData operation (though it could also occur with, say, a MakeDir op).
On the client, a modification operation locks the vnode, but the bulk
status fetch only locks the parent directory, so no ordering is imposed
there (thereby avoiding an avenue to deadlock).
On the server, the StoreData op handler doesn't lock the vnode until it's
received all the request data, and downgrades the lock after committing the
data until it has finished sending change notifications to other clients -
which allows the status fetch to occur before it has finished.
This means that:
- a status fetch can access the target vnode either side of the exclusive
section of the modification
- the status fetch could start before the modification, yet finish after,
and vice-versa.
- the status fetch and the modification RPCs can complete in either order.
- the status fetch can return either the before or the after DV from the
modification.
- the status fetch might regress the locally cached DV.
Some of these are handled by the previous fix[1], but that's not sufficient
because it checks the DV it received against the DV it cached at the start
of the op, but the DV might've been updated in the meantime by a locally
generated modification op.
Fix this by the following means:
(1) Keep track of when we're performing a modification operation on a
vnode. This is done by marking vnode parameters with a 'modification'
note that causes the AFS_VNODE_MODIFYING flag to be set on the vnode
for the duration.
(2) Alter the speculation race detection to ignore speculative status
fetches if either the vnode is marked as being modified or the data
version number is not what we expected.
Note that whilst the "vnode modified" warning does get recovered from as it
causes the client to refetch the status at the next opportunity, it will
also invalidate the pagecache, so changes might get lost.
Fixes: a9e5c87ca744 ("afs: Fix speculative status fetch going out of order wrt to modifications")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-and-reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/160605082531.252452.14708077925602709042.stgit@warthog.procyon.org.uk/ [1]
Link: https://lore.kernel.org/linux-fsdevel/161961335926.39335.2552653972195467566.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS updates from David Howells:
"Use the new netfs lib.
Begin the process of overhauling the use of the fscache API by AFS and
the introduction of support for features such as Transparent Huge
Pages (THPs).
- Add some support for THPs, including using core VM helper functions
to find details of pages.
- Use the ITER_XARRAY I/O iterator to mediate access to the pagecache
as this handles THPs and doesn't require allocation of large bvec
arrays.
- Delegate address_space read/pre-write I/O methods for AFS to the
netfs helper library. A method is provided to the library that
allows it to issue a read against the server.
This includes a change in use for PG_fscache (it now indicates a
DIO write in progress from the marked page), so a number of waits
need to be deployed for it.
- Split the core AFS writeback function to make it easier to modify
in future patches to handle writing to the cache. [This might
feasibly make more sense moved out into my fscache-iter branch].
I've tested these with "xfstests -g quick" against an AFS volume
(xfstests needs patching to make it work). With this, AFS without a
cache passes all expected xfstests; with a cache, there's an extra
failure, but that's also there before these patches. Fixing that
probably requires a greater overhaul (as can be found on my
fscache-iter branch, but that's for a later time).
Thanks should go to Marc Dionne and Jeff Altman of AuriStor for
exercising the patches in their test farm also"
Link: https://lore.kernel.org/lkml/3785063.1619482429@warthog.procyon.org.uk/
* tag 'afs-netfs-lib-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Use the netfs_write_begin() helper
afs: Use new netfs lib read helper API
afs: Use the fs operation ops to handle FetchData completion
afs: Prepare for use of THPs
afs: Extract writeback extension into its own function
afs: Wait on PG_fscache before modifying/releasing a page
afs: Use ITER_XARRAY for writing
afs: Set up the iov_iter before calling afs_extract_data()
afs: Log remote unmarshalling errors
afs: Don't truncate iter during data fetch
afs: Move key to afs_read struct
afs: Print the operation debug_id when logging an unexpected data version
afs: Pass page into dirty region helpers to provide THP size
afs: Disable use of the fscache I/O routines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs inode type handling updates from Al Viro:
"We should never change the type bits of ->i_mode or the method tables
(->i_op and ->i_fop) of a live inode.
Unfortunately, not all filesystems took care to prevent that"
* 'work.inode-type-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
spufs: fix bogosity in S_ISGID handling
9p: missing chunk of "fs/9p: Don't update file type when updating file attributes"
openpromfs: don't do unlock_new_inode() until the new inode is set up
hostfs_mknod(): don't bother with init_special_inode()
cifs: have cifs_fattr_to_inode() refuse to change type on live inode
cifs: have ->mkdir() handle race with another client sanely
do_cifs_create(): don't set ->i_mode of something we had not created
gfs2: be careful with inode refresh
ocfs2_inode_lock_update(): make sure we don't change the type bits of i_mode
orangefs_inode_is_stale(): i_mode type bits do *not* form a bitmap...
vboxsf: don't allow to change the inode type
afs: Fix updating of i_mode due to 3rd party change
ceph: don't allow type or device number to change on non-I_NEW inodes
ceph: fix up error handling with snapdirs
new helper: inode_wrong_type()
|
|
Make AFS use the new netfs_write_begin() helper to do the pre-reading
required before the write. If successful, the helper returns with the
required page filled in and locked. It may read more than just one page,
expanding the read to meet cache granularity requirements as necessary.
Note: A more advanced version of this could be made that does
generic_perform_write() for a whole cache granule. This would make it
easier to avoid doing the download/read for the data to be overwritten.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/160588546422.3465195.1546354372589291098.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161539563244.286939.16537296241609909980.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653819291.2770958.406013201547420544.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789102743.6155.17396591236631761195.stgit@warthog.procyon.org.uk/ # v6
|
|
Make AFS use the new netfs read helpers to implement the VM read
operations:
- afs_readpage() now hands off responsibility to netfs_readpage().
- afs_readpages() is gone and replaced with afs_readahead().
- afs_readahead() just hands off responsibility to netfs_readahead().
These make use of the cache if a cookie is supplied, otherwise just call
the ->issue_op() method a sufficient number of times to complete the entire
request.
Changes:
v5:
- Use proper wait function for PG_fscache in afs_page_mkwrite()[1].
- Use killable wait for PG_writeback in afs_page_mkwrite()[1].
v4:
- Folded in error handling fixes to afs_req_issue_op().
- Added flag to netfs_subreq_terminated() to indicate that the caller may
have been running async and stuff that might sleep needs punting to a
workqueue.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk [1]
Link: https://lore.kernel.org/r/160588542733.3465195.7526541422073350302.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118158436.1232039.3884845981224091996.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161053540.2537118.14904446369309535330.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340418739.1303470.5908092911600241280.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539561926.286939.5729036262354802339.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653817977.2770958.17696456811587237197.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789101258.6155.3879271028895121537.stgit@warthog.procyon.org.uk/ # v6
|
|
Use the 'success' and 'aborted' afs_operations_ops methods and add a
'failed' method to handle the completion of an AFS.FetchData,
AFS.FetchData64 or YFS.FetchData64 RPC operation rather than directly
calling the done func pointed to by the afs_read struct from the call
delivery handler.
This means the done function will be called back on error also, not just on
successful completion.
This allows motion towards asynchronous data reception on data fetch calls
and allows any error to be handed off to the fscache read helper in the
same place as a successful completion.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/160588541471.3465195.8807019223378490810.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118157260.1232039.6549085372718234792.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161052647.2537118.12922380836599003659.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340417106.1303470.3502017303898569631.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539560673.286939.391310781674212229.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653816367.2770958.5856904574822446404.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789099994.6155.473719823490561190.stgit@warthog.procyon.org.uk/ # v6
|
|
As a prelude to supporting transparent huge pages, use thp_size() and
similar rather than PAGE_SIZE/SHIFT.
Further, try and frame everything in terms of file positions and lengths
rather than page indices and numbers of pages.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/160588540227.3465195.4752143929716269062.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118155821.1232039.540445038028845740.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161051439.2537118.15577827510426326534.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340415869.1303470.6040191748634322355.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539559365.286939.18344613540296085269.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653815142.2770958.454490670311230206.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789098713.6155.16394227991842480300.stgit@warthog.procyon.org.uk/ # v6
|
|
Extract writeback extension into its own function to break up the writeback
function a bit.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/160588538471.3465195.782513375683399583.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118154610.1232039.1765365632920504822.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161050546.2537118.2202554806419189453.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340414102.1303470.9078891484034668985.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539558417.286939.2879469588895925399.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653813972.2770958.12671731209438112378.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789097132.6155.4916609419912731964.stgit@warthog.procyon.org.uk/ # v6
|
|
PG_fscache is going to be used to indicate that a page is being written to
the cache, and that the page should not be modified or released until it's
finished.
Make afs_invalidatepage() and afs_releasepage() wait for it.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/158861253957.340223.7465334678444521655.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465832417.1377938.3571599385208729791.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588536286.3465195.13231895135369807920.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118153708.1232039.3535103645871176749.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161049369.2537118.11591934943429117060.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340412903.1303470.6424701655031380012.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539556890.286939.5873470593519458598.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653812726.2770958.18167145829938766503.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789096241.6155.5907241930823579235.stgit@warthog.procyon.org.uk/ # v6
|
|
Use a single ITER_XARRAY iterator to describe the portion of a file to be
transmitted to the server rather than generating a series of small
ITER_BVEC iterators on the fly. This will make it easier to implement AIO
in afs.
In theory we could maybe use one giant ITER_BVEC, but that means
potentially allocating a huge array of bio_vec structs (max 256 per page)
when in fact the pagecache already has a structure listing all the relevant
pages (radix_tree/xarray) that can be walked over.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/153685395197.14766.16289516750731233933.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/158861251312.340223.17924900795425422532.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465828607.1377938.6903132788463419368.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588535018.3465195.14509994354240338307.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118152415.1232039.6452879415814850025.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161048194.2537118.13763612220937637316.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340411602.1303470.4661108879482218408.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539555629.286939.5241869986617154517.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653811456.2770958.7017388543246759245.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789095005.6155.6789055030327407928.stgit@warthog.procyon.org.uk/ # v6
|
|
afs_extract_data() sets up a temporary iov_iter and passes it to AF_RXRPC
each time it is called to describe the remaining buffer to be filled.
Instead:
(1) Put an iterator in the afs_call struct.
(2) Set the iterator for each marshalling stage to load data into the
appropriate places. A number of convenience functions are provided to
this end (eg. afs_extract_to_buf()).
This iterator is then passed to afs_extract_data().
(3) Use the new ITER_XARRAY iterator when reading data to load directly
into the inode's pages without needing to create a list of them.
This will allow O_DIRECT calls to be supported in future patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/152898380012.11616.12094591785228251717.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/153685394431.14766.3178466345696987059.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/153999787395.866.11218209749223643998.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/154033911195.12041.3882700371848894587.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/158861250059.340223.1248231474865140653.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465827399.1377938.11181327349704960046.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588533776.3465195.3612752083351956948.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118151238.1232039.17015723405750601161.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161047240.2537118.14721975104810564022.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340410333.1303470.16260122230371140878.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539554187.286939.15305559004905459852.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653810525.2770958.4630666029125411789.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789093719.6155.7877160739235087723.stgit@warthog.procyon.org.uk/ # v6
|
|
Log unmarshalling errors reported by the peer (ie. it can't parse what we
sent it). Limit the maximum number of messages to 3.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/159465826250.1377938.16372395422217583913.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588532584.3465195.15618385466614028590.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118149739.1232039.208060911149801695.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161046033.2537118.7779717661044373273.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340409118.1303470.17812607349396199116.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539552964.286939.16503232687974398308.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653808989.2770958.11530765353025697860.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789092349.6155.8581594259882708631.stgit@warthog.procyon.org.uk/ # v6
|
|
Don't truncate the iterator to correspond to the actual data size when
fetching the data from the server - rather, pass the length we want to read
to rxrpc.
This will allow the clear-after-read code in future to simply clear the
remaining iterator capacity rather than having to reinitialise the
iterator.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/158861249201.340223.13035445866976590375.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465825061.1377938.14403904452300909320.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588531418.3465195.10712005940763063144.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118148567.1232039.13380313332292947956.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161044610.2537118.17908520793806837792.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340407907.1303470.6501394859511712746.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539551721.286939.14655713136572200716.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653807790.2770958.14034599989374173734.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789090823.6155.15673999934535049102.stgit@warthog.procyon.org.uk/ # v6
|
|
Stash the key used to authenticate read operations in the afs_read struct.
This will be necessary to reissue the operation against the server if a
read from the cache fails in upcoming cache changes.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/158861248336.340223.1851189950710196001.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465823899.1377938.11925978022348532049.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588529557.3465195.7303323479305254243.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118147693.1232039.13780672951838643842.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161043340.2537118.511899217704140722.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340406678.1303470.12676824086429446370.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539550819.286939.1268332875889175195.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653806683.2770958.11300984379283401542.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789089556.6155.14603302893431820997.stgit@warthog.procyon.org.uk/ # v6
|
|
Print the afs_operation debug_id when logging an unexpected change in the
data version. This allows the logged message to be matched against
tracelines.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/160588528377.3465195.2206051235095182302.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118146111.1232039.11398082422487058312.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161042180.2537118.2471333561661033316.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340405772.1303470.3877167548944248214.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539549628.286939.15234870409714613954.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653805530.2770958.15120507632529970934.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789088290.6155.3494369629853673866.stgit@warthog.procyon.org.uk/ # v6
|
|
Pass a pointer to the page being accessed into the dirty region helpers so
that the size of the page can be determined in case it's a transparent huge
page.
This also required the page to be passed into the afs_page_dirty trace
point - so there's no need to specifically pass in the index or private
data as these can be retrieved directly from the page struct.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/160588527183.3465195.16107942526481976308.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118144921.1232039.11377711180492625929.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161040747.2537118.11435394902674511430.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340404553.1303470.11414163641767769882.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539548385.286939.8864598314493255313.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653804285.2770958.3497360004849598038.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789087043.6155.16922142208140170528.stgit@warthog.procyon.org.uk/ # v6
|
|
Disable use of the fscache I/O routined by the AFS filesystem. It's about
to transition to passing iov_iters down and fscache is about to have its
I/O path to use iov_iter, so all that needs to change.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/158861209824.340223.1864211542341758994.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465768717.1376105.2229314852486665807.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588457929.3465195.1730097418904945578.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118143744.1232039.2727898205333669064.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161039077.2537118.7986870854927176905.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340403323.1303470.8159439948319423431.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539547167.286939.3536238932531122332.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653802797.2770958.547311814861545911.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789085806.6155.2596146255056027428.stgit@warthog.procyon.org.uk/ # v6
|
|
Open-coding this function meant it missed out on the recent bugfix
for waiters being woken by a delayed wake event from a previous
instantiation of the page[1].
[DH: Changed the patch to use vmf->page rather than variable page which
doesn't exist yet upstream]
Fixes: 1cf7a1518aef ("afs: Implement shared-writeable mmap")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: kafs-testing@auristor.com
cc: linux-afs@lists.infradead.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20210320054104.1300774-4-willy@infradead.org
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c2407cf7d22d0c0d94cf20342b3b8f06f1d904e7 [1]
|
|
afs_listxattr() lists all the available special afs xattrs (i.e. those in
the "afs.*" space), no matter what type of server we're dealing with. But
OpenAFS servers, for example, cannot deal with some of the extra-capable
attributes that AuriStor (YFS) servers provide. Unfortunately, the
presence of the afs.yfs.* attributes causes errors[1] for anything that
tries to read them if the server is of the wrong type.
Fix the problem by removing afs_listxattr() so that none of the special
xattrs are listed (AFS doesn't support xattrs). It does mean, however,
that getfattr won't list them, though they can still be accessed with
getxattr() and setxattr().
This can be tested with something like:
getfattr -d -m ".*" /afs/example.com/path/to/file
With this change, none of the afs.* attributes should be visible.
Changes:
ver #2:
- Hide all of the afs.* xattrs, not just the ACL ones.
Fixes: ae46578b963f ("afs: Get YFS ACLs and information through xattrs")
Reported-by: Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003502.html [1]
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003567.html # v1
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003573.html # v2
|
|
If someone attempts to access YFS-related xattrs (e.g. afs.yfs.acl) on a
file on a non-YFS AFS server (such as OpenAFS), then the kernel will jump
to a NULL function pointer because the afs_fetch_acl_operation descriptor
doesn't point to a function for issuing an operation on a non-YFS
server[1].
Fix this by making afs_wait_for_operation() check that the issue_afs_rpc
method is set before jumping to it and setting -ENOTSUPP if not. This fix
also covers other potential operations that also only exist on YFS servers.
afs_xattr_get/set_yfs() then need to translate -ENOTSUPP to -ENODATA as the
former error is internal to the kernel.
The bug shows up as an oops like the following:
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[...]
Call Trace:
afs_wait_for_operation+0x83/0x1b0 [kafs]
afs_xattr_get_yfs+0xe6/0x270 [kafs]
__vfs_getxattr+0x59/0x80
vfs_getxattr+0x11c/0x140
getxattr+0x181/0x250
? __check_object_size+0x13f/0x150
? __fput+0x16d/0x250
__x64_sys_fgetxattr+0x64/0xb0
do_syscall_64+0x49/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fb120a9defe
This was triggered with "cp -a" which attempts to copy xattrs, including
afs ones, but is easier to reproduce with getfattr, e.g.:
getfattr -d -m ".*" /afs/openafs.org/
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Reported-by: Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003498.html [1]
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003566.html # v1
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003572.html # v2
|
|
Fix afs_apply_status() to mask off the irrelevant bits from status->mode
when OR'ing them into i_mode. This can happen when a 3rd party chmod
occurs.
Also fix afs_inode_init_from_status() to mask off the mode bits when
initialising i_mode.
Fixes: 260a980317da ("[AFS]: Add "directory write" support.")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
|
|
AF_RXRPC sockets use UDP ports in encap mode. This causes socket and dst
from an incoming packet to get stolen and attached to the UDP socket from
whence it is leaked when that socket is closed.
When a network namespace is removed, the wait for dst records to be cleaned
up happens before the cleanup of the rxrpc and UDP socket, meaning that the
wait never finishes.
Fix this by moving the rxrpc (and, by dependence, the afs) private
per-network namespace registrations to the device group rather than subsys
group. This allows cached rxrpc local endpoints to be cleared and their
UDP sockets closed before we try waiting for the dst records.
The symptom is that lines looking like the following:
unregister_netdevice: waiting for lo to become free
get emitted at regular intervals after running something like the
referenced syzbot test.
Thanks to Vadim for tracking this down and work out the fix.
Reported-by: syzbot+df400f2f24a1677cd7e0@syzkaller.appspotmail.com
Reported-by: Vadim Fedorenko <vfedorenko@novek.ru>
Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/161196443016.3868642.5577440140646403533.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.
As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.
Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
The generic_fillattr() helper fills in the basic attributes associated
with an inode. Enable it to handle idmapped mounts. If the inode is
accessed through an idmapped mount map it into the mount's user
namespace before we store the uid and gid. If the initial user namespace
is passed nothing changes so non-idmapped mounts will see identical
behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
The posix acl permission checking helpers determine whether a caller is
privileged over an inode according to the acls associated with the
inode. Add helpers that make it possible to handle acls on idmapped
mounts.
The vfs and the filesystems targeted by this first iteration make use of
posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to
translate basic posix access and default permissions such as the
ACL_USER and ACL_GROUP type according to the initial user namespace (or
the superblock's user namespace) to and from the caller's current user
namespace. Adapt these two helpers to handle idmapped mounts whereby we
either map from or into the mount's user namespace depending on in which
direction we're translating.
Similarly, cap_convert_nscap() is used by the vfs to translate user
namespace and non-user namespace aware filesystem capabilities from the
superblock's user namespace to the caller's user namespace. Enable it to
handle idmapped mounts by accounting for the mount's user namespace.
In addition the fileystems targeted in the first iteration of this patch
series make use of the posix_acl_chmod() and, posix_acl_update_mode()
helpers. Both helpers perform permission checks on the target inode. Let
them handle idmapped mounts. These two helpers are called when posix
acls are set by the respective filesystems to handle this case we extend
the ->set() method to take an additional user namespace argument to pass
the mount's user namespace down.
Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
The number of dirent records used by an AFS directory entry should be
calculated using the assumption that there is a 16-byte name field in the
first block, rather than a 20-byte name field (which is actually the case).
This miscalculation is historic and effectively standard, so we have to use
it.
The calculation we need to use is:
1 + (((strlen(name) + 1) + 15) >> 5)
where we are adding one to the strlen() result to account for the NUL
termination.
Fix this by the following means:
(1) Create an inline function to do the calculation for a given name
length.
(2) Use the function to calculate the number of records used for a dirent
in afs_dir_iterate_block().
Use this to move the over-end check out of the loop since it only
needs to be done once.
Further use this to only go through the loop for the 2nd+ records
composing an entry. The only test there now is for if the record is
allocated - and we already checked the first block at the top of the
outer loop.
(3) Add a max name length check in afs_dir_iterate_block().
(4) Make afs_edit_dir_add() and afs_edit_dir_remove() use the function
from (1) to calculate the number of blocks rather than doing it
incorrectly themselves.
Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...")
Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
|
|
AFS has a structured layout in its directory contents (AFS dirs are
downloaded as files and parsed locally by the client for lookup/readdir).
The slots in the directory are defined by union afs_xdr_dirent. This,
however, only directly allows a name of a length that will fit into that
union. To support a longer name, the next 1-8 contiguous entries are
annexed to the first one and the name flows across these.
afs_dir_iterate_block() uses strnlen(), limited to the space to the end of
the page, to find out how long the name is. This worked fine until
6a39e62abbaf. With that commit, the compiler determines the size of the
array and asserts that the string fits inside that array. This is a
problem for AFS because we *expect* it to overflow one or more arrays.
A similar problem also occurs in afs_dir_scan_block() when a directory file
is being locally edited to avoid the need to redownload it. There strlen()
was being used safely because each page has the last byte set to 0 when the
file is downloaded and validated (in afs_dir_check_page()).
Fix this by changing the afs_xdr_dirent union name field to an
indeterminate-length array and dropping the overflow field.
(Note that whilst looking at this, I realised that the calculation of the
number of slots a dirent used is non-standard and not quite right, but I'll
address that in a separate patch.)
The issue can be triggered by something like:
touch /afs/example.com/thisisaveryveryverylongname
and it generates a report that looks like:
detected buffer overflow in strnlen
------------[ cut here ]------------
kernel BUG at lib/string.c:1149!
...
RIP: 0010:fortify_panic+0xf/0x11
...
Call Trace:
afs_dir_iterate_block+0x12b/0x35b
afs_dir_iterate+0x14e/0x1ce
afs_do_lookup+0x131/0x417
afs_lookup+0x24f/0x344
lookup_open.isra.0+0x1bb/0x27d
open_last_lookups+0x166/0x237
path_openat+0xe0/0x159
do_filp_open+0x48/0xa4
? kmem_cache_alloc+0xf5/0x16e
? __clear_close_on_exec+0x13/0x22
? _raw_spin_unlock+0xa/0xb
do_sys_openat2+0x72/0xde
do_sys_open+0x3b/0x58
do_syscall_64+0x2d/0x3a
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 6a39e62abbaf ("lib: string.h: detect intra-object overflow in fortified string functions")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: Daniel Axtens <dja@axtens.net>
|
|
There's a memory leak in afs_parse_source() whereby multiple source=
parameters overwrite fc->source in the fs_context struct without freeing
the previously recorded source.
Fix this by only permitting a single source parameter and rejecting with
an error all subsequent ones.
This was caught by syzbot with the kernel memory leak detector, showing
something like the following trace:
unreferenced object 0xffff888114375440 (size 32):
comm "repro", pid 5168, jiffies 4294923723 (age 569.948s)
backtrace:
slab_post_alloc_hook+0x42/0x79
__kmalloc_track_caller+0x125/0x16a
kmemdup_nul+0x24/0x3c
vfs_parse_fs_string+0x5a/0xa1
generic_parse_monolithic+0x9d/0xc5
do_new_mount+0x10d/0x15a
do_mount+0x5f/0x8e
__do_sys_mount+0xff/0x127
do_syscall_64+0x2d/0x3a
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 13fcc6837049 ("afs: Add fs_context support")
Reported-by: syzbot+86dc6632faaca40133ab@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When doing a lookup in a directory, the afs filesystem uses a bulk
status fetch to speculatively retrieve the statuses of up to 48 other
vnodes found in the same directory and it will then either update extant
inodes or create new ones - effectively doing 'lookup ahead'.
To avoid the possibility of deadlocking itself, however, the filesystem
doesn't lock all of those inodes; rather just the directory inode is
locked (by the VFS).
When the operation completes, afs_inode_init_from_status() or
afs_apply_status() is called, depending on whether the inode already
exists, to commit the new status.
A case exists, however, where the speculative status fetch operation may
straddle a modification operation on one of those vnodes. What can then
happen is that the speculative bulk status RPC retrieves the old status,
and whilst that is happening, the modification happens - which returns
an updated status, then the modification status is committed, then we
attempt to commit the speculative status.
This results in something like the following being seen in dmesg:
kAFS: vnode modified {100058:861} 8->9 YFS.InlineBulkStatus
showing that for vnode 861 on volume 100058, we saw YFS.InlineBulkStatus
say that the vnode had data version 8 when we'd already recorded version
9 due to a local modification. This was causing the cache to be
invalidated for that vnode when it shouldn't have been. If it happens
on a data file, this might lead to local changes being lost.
Fix this by ignoring speculative status updates if the data version
doesn't match the expected value.
Note that it is possible to get a DV regression if a volume gets
restored from a backup - but we should get a callback break in such a
case that should trigger a recheck anyway. It might be worth checking
the volume creation time in the volsync info and, if a change is
observed in that (as would happen on a restore), invalidate all caches
associated with the volume.
Fixes: 5cf9dd55a0ec ("afs: Prospectively look up extra files when doing a single lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
