| Age | Commit message (Collapse) | Author |
|---|
|
Extend aquacomputer_d5next driver to expose various hardware
sensors of the Aquacomputer High Flow Next flow sensor, which
communicates through a proprietary USB HID protocol.
The High Flow Next exposes +5V voltages, water quality, conductivity
and flow readings. A temperature sensor can be connected to it, in
which case it provides its reading and an estimation of the
dissipated/absorbed power in the liquid cooling loop.
Additionally, serial number and firmware version are exposed through
debugfs.
Registry offsets were discovered and tested by users on Github [1] [2].
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/8
[2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/34
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20220907100739.806571-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
On systems with more than one tps23861, creating the debugfs directory
for additional devices fails with
debugfs: Directory 'tps23861' with parent '/' already present!
To resolve this, include the hwmon device name in the directory name.
Since the name is unique, this guarantees that the debugfs directory
is unique.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220907015405.16547-2-mr.nuke.me@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
When reading the 'port_status' debugfs entry, some I2C registers were
read more than once. This looks inefficient in an I2C trace.
To reduce I2C traffic, update tps23861_port_status_show() to only read
each register once. Indexing the port number from 0 instead of 1 also
allows simplifying things a bit.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://lore.kernel.org/r/20220907015405.16547-1-mr.nuke.me@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
./drivers/hwmon/emc2305.c: 14 linux/version.h not needed.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2024
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220901022332.40248-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Controller.
Add driver for Microchip EMC2301/2/3/5 RPM-based PWM Fan Speed Controller.
Modify Makefile and Kconfig to support Microchip EMC2305 RPM-based
PWM Fan Speed Controller.
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220810171552.56417-3-michaelsh@nvidia.com
[groeck: Drop unnecessary () around DIV_ROUND_CLOSEST()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The MAX31790 has a tach input enable bit in each fan's configuration
register. This is only enabled by the driver if RPM mode is selected,
but the driver doesn't provide a way to independently enable tachometer
input regardless of the regulator mode.
By adding the fanN_enable sysfs files, we can decouple the tach input
from the regulator mode. Also update the documentation.
Signed-off-by: Justin Ledford <justinledford@google.com>
Link: https://lore.kernel.org/r/20220829195930.2521755-1-justinledford@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
There are no users outside of PWM core of the of_pwm_get().
Make it static.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220826172642.16404-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The devm_of_pwm_get() has recently lost its single user, drop
the dead API as well.
Note, the new code should use either plain pwm_get() or managed
devm_pwm_get() or devm_fwnode_pwm_get() APIs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220826172642.16404-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
There is no need to call OF specific devm_of_pwm_get() since
the device node parameter duplicates in the device parameter.
Hence we may safely replace it by plain devm_pwm_get() call.
This allows to drop devm_of_pwm_get() as no more users will be.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220826172642.16404-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The devm_clk_get_enabled() helper:
- calls devm_clk_get()
- calls clk_prepare_enable() and registers what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code, the error handling paths and avoid the need of
a dedicated function used with devm_add_action_or_reset().
Based on my test with allyesconfig, this reduces the .o size from:
text data bss dec hex filename
2419 1472 0 3891 f33 drivers/hwmon/sparx5-temp.o
down to:
2155 1472 0 3627 e2b drivers/hwmon/sparx5-temp.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/cfe4c965074b5ecbe03830b05e038b4594c7b970.1661336689.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
When dell-smm-hwmon is loaded on a machine with a buggy BIOS
with the option "force" being enabled, it wrongly prints
that the buggy features where disabled. This may cause
users to wrongly assume that the driver still protects them
from these BIOS bugs even with "force" being enabled.
Replace the messages with two messages each which are depending
on the value of the "force" parameter. The messages which are
being printed when "force" is not set use dev_notice() instead
of dev_warn() since they only serve as a notice.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220822174053.8750-3-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Include mod_devicetable.h explicitly to replace the dropped of.h
which included mod_devicetable.h indirectly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220826173700.17395-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210014.6769-1-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add reporting if the PSU is running in single or multi rail mode via
ocpmode debugfs entry. Also update the documentation and driver comments
accordingly.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/YvS9PZKr0xqFqJny@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for reading virtual temperature sensors for the D5 Next, Octo,
Quadro and Farbwerk 360.
Virtual temperature sensors are written to the device by the user, pulling
from an arbitrary value source. Writing to them is not yet reverse
engineered, so the only way to set them for now is to use the official
software.
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20220817121441.112198-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This driver utilises a WMI interface found in AMD 500 series ASUS boards,
to read EC registers. But it turned out that ASUS abandoned the
interface, as it disappeared from Intel 600 series boards. Additionally,
the WMI interface was incredibly slow. Therefore this driver was deprecated
in favor of the asus_ec_sensors driver, which supports more boards, more
sensors, and is faster.
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220720072016.102086-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In gsc_hwmon_get_devtree_pdata(), we should call of_node_get() before
the of_find_compatible_node() which will automatically call
of_node_put() for the 'from' argument.
Fixes: 3bce5377ef66 ("hwmon: Add Gateworks System Controller support")
Signed-off-by: Liang He <windhl@126.com>
Co-developed-by: Mengda Chen <chenmengda2009@163.com>
Signed-off-by: Mengda Chen <chenmengda2009@163.com>
Link: https://lore.kernel.org/r/20220916154708.3084515-1-chenmengda2009@163.com
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The offsets for setting speeds of fans connected to Quadro are off by one.
Set them to their correct values.
The offsets as shown point to registers for setting the fan control mode,
which will be explored in future patches, but slipped in here. When
setting fan speeds, the resulting values were overlapping, which made the
fans still run in my initial testing.
Fixes: cdbe34da01e3 ("hwmon: (aquacomputer_d5next) Add support for Aquacomputer Quadro fan controller")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20220914114327.6941-1-savicaleksa83@gmail.com
Cc: stable@vger.kenrel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Intel VT-d fixes from Lu Baolu:
- Boot kdump kernels with VT-d scalable mode on
- Calculate the right page table levels
- Fix two recursive locking issues
- Fix a lockdep splat issue
- AMD IOMMU fixes:
- Fix for completion-wait command to use full 64 bits of data
- Fix PASID related issue where GPU sound devices failed to
initialize
- Fix for Virtio-IOMMU to report correct caching behavior, needed for
use with VFIO
* tag 'iommu-fixes-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix false ownership failure on AMD systems with PASID activated
iommu/vt-d: Fix possible recursive locking in intel_iommu_init()
iommu/virtio: Fix interaction with VFIO
iommu/vt-d: Fix lockdep splat due to klist iteration in atomic context
iommu/vt-d: Fix recursive lock issue in iommu_flush_dev_iotlb()
iommu/vt-d: Correctly calculate sagaw value of IOMMU
iommu/vt-d: Fix kdump kernels boot failure with scalable mode
iommu/amd: use full 64-bit value in build_completion_wait()
|
|
The AMD IOMMU driver cannot activate PASID mode on a RID without the RID's
translation being set to IDENTITY. Further it requires changing the RID's
page table layout from the normal v1 IOMMU_DOMAIN_IDENTITY layout to a
different v2 layout.
It does this by creating a new iommu_domain, configuring that domain for
v2 identity operation and then attaching it to the group, from within the
driver. This logic assumes the group is already set to the IDENTITY domain
and is being used by the DMA API.
However, since the ownership logic is based on the group's domain pointer
equaling the default domain to detect DMA API ownership, this causes it to
look like the group is not attached to the DMA API any more. This blocks
attaching drivers to any other devices in the group.
In a real system this manifests itself as the HD-audio devices on some AMD
platforms losing their device drivers.
Work around this unique behavior of the AMD driver by checking for
equality of IDENTITY domains based on their type, not their pointer
value. This allows the AMD driver to have two IDENTITY domains for
internal purposes without breaking the check.
Have the AMD driver properly declare that the special domain it created is
actually an IDENTITY domain.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: stable@vger.kernel.org
Fixes: 512881eacfa7 ("bus: platform,amba,fsl-mc,PCI: Add device DMA ownership management")
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0-v1-ea566e16b06b+811-amd_owner_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The global rwsem dmar_global_lock was introduced by commit 3a5670e8ac932
("iommu/vt-d: Introduce a rwsem to protect global data structures"). It
is used to protect DMAR related global data from DMAR hotplug operations.
The dmar_global_lock used in the intel_iommu_init() might cause recursive
locking issue, for example, intel_iommu_get_resv_regions() is taking the
dmar_global_lock from within a section where intel_iommu_init() already
holds it via probe_acpi_namespace_devices().
Using dmar_global_lock in intel_iommu_init() could be relaxed since it is
unlikely that any IO board must be hot added before the IOMMU subsystem is
initialized. This eliminates the possible recursive locking issue by moving
down DMAR hotplug support after the IOMMU is initialized and removing the
uses of dmar_global_lock in intel_iommu_init().
Fixes: d5692d4af08cd ("iommu/vt-d: Fix suspicious RCU usage in probe_acpi_namespace_devices()")
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/894db0ccae854b35c73814485569b634237b5538.1657034828.git.robin.murphy@arm.com
Link: https://lore.kernel.org/r/20220718235325.3952426-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix severe regression in asus-ec-sensors driver
which resulted in EC driver failures
- Fix various bugs in mr75203 driver
- Fix byte order bug in tps23861 driver
* tag 'hwmon-for-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (asus-ec-sensors) autoload module via DMI data
hwmon: (mr75203) enable polling for all VM channels
hwmon: (mr75203) fix multi-channel voltage reading
hwmon: (mr75203) fix voltage equation for negative source input
hwmon: (mr75203) update pvt->v_num and vm_num to the actual number of used sensors
hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" not defined
dt-bindings: hwmon: (mr75203) fix "intel,vm-map" property to be optional
hwmon: (tps23861) fix byte order in resistance register
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eight patches which looks like quite a large core change, but most of
the diffstat is reverting the attempt to rejig reference counting
introduced in the last merge window which caused issues with device
and module removal.
Of the remaining four patches, only the fix use-after-free is
substantial"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Fix use-after-free warning
scsi: core: Fix a use-after-free
scsi: core: Revert "Make sure that targets outlive devices"
scsi: core: Revert "Make sure that hosts outlive targets"
scsi: core: Revert "Simplify LLD module reference counting"
scsi: core: Revert "Call blk_mq_free_tag_set() earlier"
scsi: lpfc: Add missing destroy_workqueue() in error path
scsi: lpfc: Return DID_TRANSPORT_DISRUPTED instead of DID_REQUEUE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core and debugfs fixes for 6.0-rc5.
Included in here are:
- multiple attempts to get the arch_topology code to work properly on
non-cluster SMT systems. First attempt caused build breakages in
linux-next and 0-day, second try worked.
- debugfs fixes for a long-suffering memory leak. The pattern of
debugfs_remove(debugfs_lookup(...)) turns out to leak dentries, so
add debugfs_lookup_and_remove() to fix this problem. Also fix up
the scheduler debug code that highlighted this problem. Fixes for
other subsystems will be trickling in over the next few months for
this same issue once the debugfs function is merged.
All of these have been in linux-next since Wednesday with no reported
problems"
* tag 'driver-core-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
arch_topology: Make cluster topology span at least SMT CPUs
sched/debug: fix dentry leak in update_sched_domain_debugfs
debugfs: add debugfs_lookup_and_remove()
driver core: fix driver_set_override() issue with empty strings
Revert "arch_topology: Make cluster topology span at least SMT CPUs"
arch_topology: Make cluster topology span at least SMT CPUs
|
|
Pull block fixes from Jens Axboe:
- NVMe pull via Christoph:
- fix a use after free in nvmet (Bart Van Assche)
- fix a use after free when detecting digest errors
(Sagi Grimberg)
- fix regression that causes sporadic TCP requests to time out
(Sagi Grimberg)
- fix two off by ones errors in the nvmet ZNS support
(Dennis Maisenbacher)
- requeue aen after firmware activation (Keith Busch)
- Fix missing request flags in debugfs code (me)
- Partition scan fix (Ming)
* tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-block:
block: add missing request flags to debugfs code
nvme: requeue aen after firmware activation
nvmet: fix mar and mor off-by-one errors
nvme-tcp: fix regression that causes sporadic requests to time out
nvme-tcp: fix UAF when detecting digest errors
nvmet: fix a use-after-free
block: don't add partitions if GD_SUPPRESS_PART_SCAN is set
|
|
Pull rdma fixes from Jason Gunthorpe:
"Many bug fixes in several drivers:
- Fix misuse of the DMA API in rtrs
- Several irdma issues: hung task due to SQ flushing, incorrect
capability reporting to userspace, improper error handling for MW
corners, touching an uninitialized SGL for during invalidation.
- hns was using the wrong page size limits for the HW, an incorrect
calculation of wqe_shift causing WQE corruption, and mis computed a
timer id.
- Fix a crash in SRP triggered by blktests
- Fix compiler errors by calling virt_to_page() with the proper type
in siw
- Userspace triggerable deadlock in ODP
- mlx5 could use the wrong profile due to some driver loading races,
counters were not working in some device configurations, and a
crash on error unwind"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Report RNR NAK generation in device caps
RDMA/irdma: Use s/g array in post send only when its valid
RDMA/irdma: Return correct WC error for bind operation failure
RDMA/irdma: Return error on MR deregister CQP failure
RDMA/irdma: Report the correct max cqes from query device
MAINTAINERS: Update maintainers of HiSilicon RoCE
RDMA/mlx5: Fix UMR cleanup on error flow of driver init
RDMA/mlx5: Set local port to one when accessing counters
RDMA/mlx5: Rely on RoCE fw cap instead of devlink when setting profile
IB/core: Fix a nested dead lock as part of ODP flow
RDMA/siw: Pass a pointer to virt_to_page()
RDMA/srp: Set scmnd->result only when scmnd is not NULL
RDMA/hns: Remove the num_qpc_timer variable
RDMA/hns: Fix wrong fixed value of qp->rq.wqe_shift
RDMA/hns: Fix supported page size
RDMA/cma: Fix arguments order in net device validation
RDMA/irdma: Fix drain SQ hang with no completion
RDMA/rtrs-srv: Pass the correct number of entries for dma mapped SGL
RDMA/rtrs-clt: Use the right sg_cnt after ib_dma_map_sg
|
|
Pull drm fixes from Dave Airlie:
"From a train in the Irish countryside, regular drm fixes for 6.0-rc5.
This is mostly amdgpu/amdkfd and i915 fixes, then one panfrost, one
ttm and one edid fix. Nothing too major going on. Hopefully a quiet
week next week for LPC.
edid:
- Fix EDID 1.4 range-descriptor parsing
ttm:
- Fix ghost-object bulk moves
i915:
- Fix MIPI sequence block copy from BIOS' table
- Fix PCODE min freq setup when GuC's SLPC is in use
- Implement Workaround for eDP
- Fix has_flat_ccs selection for DG1
amdgpu:
- Firmware header fix
- SMU 13.x fix
- Debugfs memory leak fix
- NBIO 7.7 fix
- Firmware memory leak fix
amdkfd:
- Debug output fix
panfrost:
- Fix devfreq OPP"
* tag 'drm-fixes-2022-09-10' of git://anongit.freedesktop.org/drm/drm:
drm/panfrost: devfreq: set opp to the recommended one to configure regulator
drm/ttm: cleanup the resource of ghost objects after locking them
drm/amdgpu: prevent toc firmware memory leak
drm/amdgpu: correct doorbell range/size value for CSDMA_DOORBELL_RANGE
drm/amdkfd: print address in hex format rather than decimal
drm/amd/display: fix memory leak when using debugfs_lookup()
drm/amd/pm: add missing SetMGpuFanBoostLimitRpm mapping for SMU 13.0.7
drm/amd/amdgpu: add rlc_firmware_header_v2_4 to amdgpu_firmware_header
drm/i915: consider HAS_FLAT_CCS() in needs_ccs_pages
drm/i915: Implement WaEdpLinkRateDataReload
drm/i915/slpc: Let's fix the PCODE min freq table setup for SLPC
drm/i915/bios: Copy the whole MIPI sequence block
drm/ttm: update bulk move object of ghost BO
drm/edid: Handle EDID 1.4 range descriptor h/vfreq offsets
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Two fixes to test build and a fix for incorrect taint reason reporting"
* tag 'linux-kselftest-kunit-fixes-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
tools: Add new "test" taint to kernel-chktaint
kunit: fix Kconfig for build-in tests USB4 and Nitro Enclaves
kunit: fix assert_type for comparison macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A pair of device tree fixes for the Polarfire SOC
- A fix to avoid overflowing the PMU counter array when firmware
incorrectly reports the number of supported counters, which manifests
on OpenSBI versions prior to 1.1
* tag 'riscv-for-linus-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
perf: RISC-V: fix access beyond allocated array
riscv: dts: microchip: use an mpfs specific l2 compatible
dt-bindings: riscv: sifive-l2: add a PolarFire SoC compatible
|
|
Replace autoloading data based on the ACPI EC device with the DMI
records for motherboards models. The ACPI method created a bug that when
this driver returns error from the probe function because of the
unsupported motherboard model, the ACPI subsystem concludes
that the EC device does not work properly.
Fixes: 5cd29012028d ("hwmon: (asus-ec-sensors) introduce ec_board_info struct for board data")
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=216412
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=2121844
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220909155654.123398-2-eugene.shalygin@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix MIPI sequence block copy from BIOS' table. (Ville)
- Fix PCODE min freq setup when GuC's SLPC is in use. (Rodrigo)
- Implement Workaround for eDP. (Ville)
- Fix has_flat_ccs selection for DG1. (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yxn1WpmUJnJpqq23@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* edid: Fix EDID 1.4 range-descriptor parsing
* panfrost: Fix devfreq OPP
* ttm: Fix ghost-object bulk moves
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YxniKN4rK4qPp+J9@linux-uq9g
|
|
Pull VFIO fix from Alex Williamson:
- Fix zero page refcount leak (Alex Williamson)
* tag 'vfio-v6.0-rc5' of https://github.com/awilliam/linux-vfio:
vfio/type1: Unpin zero pages
|
|
SBI firmware should report total number of firmware and hardware counters
including unused ones or special ones. In this case the kernel doesn't need
to make any assumptions about gaps in reported counters, e.g. excluded timer
counter. That was fixed in OpenSBI v1.1 by commit 3f66465fb6bf ("lib: pmu:
allow to use the highest available counter"). This kernel patch has no effect
if SBI firmware behaves correctly. However it eliminates access beyond the
allocated pmu_ctr_list if the kernel is used with OpenSBI older than v1.1.
Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension")
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220830155306.301714-2-geomatsi@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Configure ip-polling register to enable polling for all voltage monitor
channels.
This enables reading the voltage values for all inputs other than just
input 0.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-7-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Fix voltage allocation and reading to support all channels in all VMs.
Prior to this change allocation and reading were done only for the first
channel in each VM.
This change counts the total number of channels for allocation, and takes
into account the channel offset when reading the sample data register.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-6-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
According to Moortec Embedded Voltage Monitor (MEVM) series 3 data
sheet, the minimum input signal is -100mv and maximum input signal
is +1000mv.
The equation used to convert the digital word to voltage uses mixed
types (*val signed and n unsigned), and on 64 bit machines also has
different size, since sizeof(u32) = 4 and sizeof(long) = 8.
So when measuring a negative input, n will be small enough, such that
PVT_N_CONST * n < PVT_R_CONST, and the result of
(PVT_N_CONST * n - PVT_R_CONST) will overflow to a very big positive
32 bit number. Then when storing the result in *val it will be the same
value just in 64 bit (instead of it representing a negative number which
will what happen when sizeof(long) = 4).
When -1023 <= (PVT_N_CONST * n - PVT_R_CONST) <= -1
dividing the number by 1024 should result of in 0, but because ">> 10"
is used, and the sign bit is used to fill the vacated bit positions, it
results in -1 (0xf...fffff) which is wrong.
This change fixes the sign problem and supports negative values by
casting n to long and replacing the shift right with div operation.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-5-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
sensors
This issue is relevant when "intel,vm-map" is set in device-tree, and
defines a lower number of VMs than actually supported.
This change is needed for all places that use pvt->v_num or vm_num
later on in the code.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-4-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Bug - in case "intel,vm-map" is missing in device-tree ,'num' is set
to 0, and no voltage channel infos are allocated.
The reason num is set to 0 when "intel,vm-map" is missing is to set the
entire pvt->vm_idx[] with incremental channel numbers, but it didn't
take into consideration that same num is used later in devm_kcalloc().
If "intel,vm-map" does exist there is no need to set the unspecified
channels with incremental numbers, because the unspecified channels
can't be accessed in pvt_read_in() which is the only other place besides
the probe functions that uses pvt->vm_idx[].
This change fixes the bug by moving the incremental channel numbers
setting to be done only if "intel,vm-map" property is defined (starting
loop from 0), and removing 'num = 0'.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-3-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Several fixes that came in since the merge window, the major one being
a fix for the spi-mux driver which was broken by the performance
optimisations due to it peering inside the core's data structures more
than it should"
* tag 'spi-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi: Fix queue hang if previous transfer failed
spi: mux: Fix mux interaction with fast path optimisations
spi: cadence-quadspi: Disable irqs during indirect reads
spi: bitbang: Fix lsb-first Rx
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"One core fix here improving the error handling on enable failure, plus
smaller fixes for the pfuze100 drive and the SPMI DT bindings"
* tag 'regulator-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Fix qcom,spmi-regulator schema
regulator: pfuze100: Fix the global-out-of-bounds access in pfuze100_regulator_probe()
regulator: core: Clean up on enable failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"A fix for how we handle controller constraints on SPI message sizes,
only impacting systems with SPI controllers with very low limits like
the AMD controller used in the Steam Deck"
* tag 'regmap-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: spi: Reserve space for register address/padding
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc, netfilter, wireless and bluetooth
subtrees.
Current release - regressions:
- skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
- bluetooth: fix regression preventing ACL packet transmission
Current release - new code bugs:
- dsa: microchip: fix kernel oops on ksz8 switches
- dsa: qca8k: fix NULL pointer dereference for
of_device_get_match_data
Previous releases - regressions:
- netfilter: clean up hook list when offload flags check fails
- wifi: mt76: fix crash in chip reset fail
- rxrpc: fix ICMP/ICMP6 error handling
- ice: fix DMA mappings leak
- i40e: fix kernel crash during module removal
Previous releases - always broken:
- ipv6: sr: fix out-of-bounds read when setting HMAC data.
- tcp: TX zerocopy should not sense pfmemalloc status
- sch_sfb: don't assume the skb is still around after
enqueueing to child
- netfilter: drop dst references before setting
- wifi: wilc1000: fix DMA on stack objects
- rxrpc: fix an insufficiently large sglist in
rxkad_verify_packet_2()
- fec: use a spinlock to guard `fep->ptp_clk_on`
Misc:
- usb: qmi_wwan: add Quectel RM520N"
* tag 'net-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
sch_sfb: Also store skb len before calling child enqueue
net: phy: lan87xx: change interrupt src of link_up to comm_ready
net/smc: Fix possible access to freed memory in link clear
net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skb
net: skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear
net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in vsc9959_sched_speed_set
net: dsa: felix: disable cut-through forwarding for frames oversized for tc-taprio
net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet
net: usb: qmi_wwan: add Quectel RM520N
net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data
tcp: fix early ETIMEDOUT after spurious non-SACK RTO
stmmac: intel: Simplify intel_eth_pci_remove()
net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()
ipv6: sr: fix out-of-bounds read when setting HMAC data.
bonding: accept unsolicited NA message
bonding: add all node mcast address when slave up
bonding: use unspecified address if no available link local address
wifi: use struct_group to copy addresses
wifi: mac80211_hwsim: check length for virtio packets
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"A couple of low-priority EFI fixes:
- prevent the randstruct plugin from re-ordering EFI protocol
definitions
- fix a use-after-free in the capsule loader
- drop unused variable"
* tag 'efi-urgent-for-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: capsule-loader: Fix use-after-free in efi_capsule_write
efi/x86: libstub: remove unused variable
efi: libstub: Disable struct randomization
|
|
Enabling panfrost GPU OPP with dynamic regulator will make OPP
responsible to enable and configure it.
Unfortunately OPP configure and enable the regulator when an OPP
is asked to be set, which is not the case during
panfrost_devfreq_init().
This leave the regulator unconfigured and if no GPU load is
triggered, no OPP is asked to be set which make the regulator framework
switching it off during regulator_late_cleanup() without
noticing and therefore make the board hang as any access to GPU
memory space make bus locks up.
Call dev_pm_opp_set_opp() with the recommend OPP in
panfrost_devfreq_init() to enable the regulator, this will properly
configure and enable the regulator and will avoid any switch off
by regulator_late_cleanup().
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906153034.153321-5-peron.clem@gmail.com
|
|
Currently phy link up/down interrupt is enabled using the
LAN87xx_INTERRUPT_MASK register. In the lan87xx_read_status function,
phy link is determined using the T1_MODE_STAT_REG register comm_ready bit.
comm_ready bit is set using the loc_rcvr_status & rem_rcvr_status.
Whenever the phy link is up, LAN87xx_INTERRUPT_SOURCE link_up bit is set
first but comm_ready bit takes some time to set based on local and
remote receiver status.
As per the current implementation, interrupt is triggered using link_up
but the comm_ready bit is still cleared in the read_status function. So,
link is always down. Initially tested with the shared interrupt
mechanism with switch and internal phy which is working, but after
implementing interrupt controller it is not working.
It can fixed either by updating the read_status function to read from
LAN87XX_INTERRUPT_SOURCE register or enable the interrupt mask for
comm_ready bit. But the validation team recommends the use of comm_ready
for link detection.
This patch fixes by enabling the comm_ready bit for link_up in the
LAN87XX_INTERRUPT_MASK_2 register (MISC Bank) and link_down in
LAN87xx_INTERRUPT_MASK register.
Fixes: 8a1b415d70b7 ("net: phy: added ethtool master-slave configuration support")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220905152750.5079-1-arun.ramadoss@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Otherwise lockdep will complain about cleaning up the bulk_move.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907100051.570641-1-christian.koenig@amd.com
Fixes: d91c411c744b ("drm/ttm: update bulk move object of ghost BO")
|
|
It's missed in psp fini.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
current function mixes CSDMA_DOORBELL_RANGE and SDMA0_DOORBELL_RANGE
range/size manipulation, while these 2 registers have difference size
field mask. Remove range/size manipulation for SDMA0_DOORBELL_RANGE.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Xiaojian Du <Xiaojian.Du@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Addresses should be printed in hex format.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
