| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This s a very quiet release for the regulator API, we have a few new
devices (most of which are just ID updates) and one new fairly
specialist core feature for use in interrupt context.
- An API allowing lockless enable/disable for regulators acquired in
exclusive mode, for use in interrupt contexts
- A rewrite of the MedaTek DVFSRC regulator driver which apparently
never worked
- Support for Mediaktek MT6312, Qualcomm QCA6390 and WCN7850, Renesas
RZ/G2L USB VBUS regulator and ST Microelectronics STM32MP13"
* tag 'regulator-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (26 commits)
regulator: dt-bindings: pca9450: Make interrupt optional
regulator: pca9450: Make IRQ optional
dt-bindings: regulator: sprd,sc2731-regulator: convert to YAML
regulator: max77857: Constify struct regmap_config
regulator: da9121: Constify struct regmap_config
dt-bindings: regulator: ti,tps65132: document VIN supply
dt-bindings: mfd: twl: Fix example
regulator: Add Renesas RZ/G2L USB VBUS regulator driver
regulator: core: Add helper for allow HW access to enable/disable regulator
regulator: Add bindings for MediaTek DVFSRC Regulators
regulator: Add refactored mtk-dvfsrc-regulator driver
regulator: Remove mtk-dvfsrc-regulator.c
regulator: userspace-consumer: quiet device deferral
regulator: dt-bindings: mt6315: Document MT6319 PMIC
regulator: add missing MODULE_DESCRIPTION() macro
dt-bindings: regulator: twl-regulator: convert to yaml
regulator: dt-bindings: describe the PMU module of the WCN7850 package
regulator: dt-bindings: describe the PMU module of the QCA6390 package
regulator: dt-bindings: rtq2208: Add specified fixed LDO VOUT property
regulator: rtq2208: Add fixed LDO VOUT property and check that matches the constraints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"There's one new feature here, a regmap_multi_reg_read() matching the
existing write function which has some IIO users coming.
This allows atomic reads from multiple registers without the need to
wrap a higher level lock in the client driver just for regmap (which
already has locks anyway).
We also have one fix for the KUnit tests, and a bunch of cleanups"
* tag 'regmap-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Add test cases for regmap_multi_reg_(read,write}()
regmap: Implement regmap_multi_reg_read()
regmap-irq: handle const struct regmap_irq_sub_irq_map
const_structs.checkpatch: add regmap structs
regmap: add missing MODULE_DESCRIPTION() macros
regmap-i2c: add missing MODULE_DESCRIPTION() macro
regmap: kunit: Use array_size() and sizeof(*ptr) consistently
regmap: maple: Switch to use kmemdup_array()
regmap: cache: Switch to use kmemdup_array()
regmap: cache: Use correct type of the rb_for_each() parameter
regmap: Switch to use kmemdup_array()
regmap: kunit: add missing MODULE_DESCRIPTION()
regmap: kunit: Fix memory leaks in gen_regmap() and gen_raw_regmap()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the GPIO virtual
consumer module that improves our ability to add automated tests for
the kernel API and the "sloppy" logic analyzer module that uses the
GPIO API to implement a coarse-grained debugging tool for useful for
remote development.
Other than that we have the usual assortment of various driver
extensions, improvements to the core GPIO code, DT-bindings and other
documentation updates as well as an extension to the interrupt
simulator:
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more
info on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot
fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core
to using a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs
from actual hardware and driving tests of the in-kernel GPIO API
from user-space over debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first
glance" debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested
as irqs via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to
errno vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and
gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with
regards to reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop
tempting people to use it
- document the preference for using pread() for reading edge events
in the sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to
specify a number of callbacks callers can use to be notified about
irqs being requested and released"
* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
gpio: mc33880: Convert comma to semicolon
gpio: virtuser: actually use the "trimmed" local variable
dt-bindings: gpio: convert Atmel GPIO to json-schema
gpio: virtuser: new virtual testing driver for the GPIO API
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
gpio: sim: lock GPIOs as interrupts when they are requested
genirq/irq_sim: add an extended irq_sim initializer
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
gpiolib: unexport gpiochip_get_desc()
gpio: add sloppy logic analyzer using polling
Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
gpio: ath79: convert to dynamic GPIO base allocation
pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
gpiolib: put gpio_suffixes in a single compilation unit
Documentation: gpio: Clarify effect of active low flag on line edges
Documentation: gpio: Clarify effect of active low flag on line values
gpiolib: Remove data-less gpiochip_add() function
gpio: sim: use devm_mutex_init()
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC host:
- Convert from using tasklet to the BH workqueue
- dw_mmc-bluefield: Add support for eMMC HW reset
- mmc_spi: Allow spi controllers incapable of lower than 400kHz
- sdhci: Rework code to eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
- sdhci-brcmstb: Add support for the BCM2712 variant
- sdhci-esdhc-imx: Disable card-detect as system wakeup on S32G platforms
- sdhci-msm: Add support for the SDX75 variant
- sdhci-of-dwcmshc: Enable CQE support for some Rockchip variants
- sdhci-of-esdhc: Convert DT-bindings to yaml
- sdhci-sprd: Convert DT-bindings to yaml
MEMSTICK:
- rtsx_pci_ms: Remove the unused Realtek PCI memstick driver"
* tag 'mmc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (26 commits)
MAINTAINERS: add 's32@nxp.com' as relevant mailing list for 'sdhci-esdhc-imx' driver
mmc: sdhci-esdhc-imx: obtain the 'per' clock rate after its enablement
mmc: sdhci-esdhc-imx: disable card detect wake for S32G based platforms
dt-bindings: mmc: sdhci-sprd: convert to YAML
mmc: davinci_mmc: report all possible bus widths
mmc: dw_mmc-bluefield: Add support for eMMC HW reset
mmc: dw_mmc: Add support for platform specific eMMC HW reset
mmc: sdhci_am654: Constify struct regmap_config
mmc: Convert from tasklet to BH workqueue
mmc: sdhi: Convert from tasklet to BH workqueue
mmc: mmc_spi: allow for spi controllers incapable of getting as low as 400k
memstick: rtsx_pci_ms: Remove Realtek PCI memstick driver
MAINTAINERS: drop entry for VIA SD/MMC controller
mmc: tmio: Remove obsolete .set_pwr() callback()
mfd: tmio: Remove obsolete .set_clk_div() callback
mmc: sdhci-brcmstb: Add ARCH_BCM2835 option
mmc: sdhci: Eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
dt-bindings: mmc: Convert fsl-esdhc.txt to yaml
dt-bindings: mmc: mmc-spi-slot: Change voltage-ranges to uint32-matrix
mmc: add missing MODULE_DESCRIPTION() macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add support for HW-managed devices
pmdomain providers:
- amlogic: Add support for the A5 and the A4 power domains
- arm: Enable system wakeups for the SCMI PM domain
- qcom/clk: Add HW-mode callbacks to allow switching of GDSC mode
pmdomain consumers:
- qcom/media/venus: Enable support for switching GDSC HW-mode on V6"
* tag 'pmdomain-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: amlogic: Constify struct meson_secure_pwrc_domain_desc
venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode on V6
clk: qcom: videocc: Use HW_CTRL_TRIGGER for SM8250, SC7280 vcodec GDSC's
clk: qcom: gdsc: Add set and get hwmode callbacks to switch GDSC mode
PM: domains: Add the domain HW-managed mode to the summary
PM: domains: Allow devices attached to genpd to be managed by HW
pmdomain: amlogic: Add support for A5 power domains controller
dt-bindings: power: add Amlogic A5 power domains
pmdomain: amlogic: add missing MODULE_DESCRIPTION() macros
pmdomain: arm: scmi_pm_domain: set flag GENPD_FLAG_ACTIVE_WAKEUP
pmdomain: renesas: rmobile-sysc: Use for_each_child_of_node_scoped()
pmdomain: core: Use genpd_is_irq_safe() helper
pmdomain: amlogic: Add support for A4 power domains controller
dt-bindings: power: add Amlogic A4 power domains
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains the usual mix of fixes, cleanups, two new drivers and
several dt binding updates. The fixes are for minor issues that are
already old (4.11-rc1 and 3.9-rc1) and were found by code review and
not during usage, so I didn't sent them for earlier inclusion.
The changes to include/linux/mfd/stm32-timers.h and
drivers/counter/stm32-timer-cnt.c are part of an immutable branch that
will also be included in the mfd and counter pulls. It changes some
register definitions and affects the pwm-stm32 driver.
Thanks go to Andy Shevchenko, AngeloGioacchino Del Regno, Conor
Dooley, David Lechner, Dhruva Gole, Drew Fustini, Frank Li, Jeff
Johnson, Junyi Zhao, Kelvin Zhang, Krzysztof Kozlowski, Lee Jones,
Linus Walleij, Linus Walleij, Michael Hennerich, Nicola Di Lieto,
Nicolas Ferre, Nuno Sa, Paul Cercueil, Raag Jadav, Rob Herring, Sean
Anderson, Sean Young, Shenwei Wang, Stefan Wahren, Trevor Gamblin,
Tzung-Bi Shih, Vincent Whitchurch and William Breathitt Gray for their
contributions to this pull request; they authored changes, spend time
reviewing changes and coordinated the above mentioned immutable
branch"
* tag 'pwm/for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (38 commits)
pwm: axi-pwmgen: add .max_register to regmap
dt-bindings: pwm: at91: Add sama7d65 compatible string
pwm: atmel-tcb: Make private data variable naming consistent
pwm: atmel-tcb: Simplify checking the companion output
pwm: Allow pwm state transitions from an invalid state
pwm: xilinx: Simplify using devm_ functions
pwm: Use guards for pwm_lookup_lock instead of explicity mutex_lock + mutex_unlock
pwm: Use guards for export->lock instead of explicity mutex_lock + mutex_unlock
pwm: Use guards for pwm_lock instead of explicity mutex_lock + mutex_unlock
pwm: Register debugfs operations after the pwm class
pwm: imx-tpm: Enable pinctrl setting for sleep state
pwm: lpss: drop redundant runtime PM handles
pwm: lpss: use devm_pm_runtime_enable() helper
pwm-stm32: Make use of parametrised register definitions
dt-bindings: pwm: imx: remove interrupt property from required
pwm: meson: Add support for Amlogic S4 PWM
pwm: Add GPIO PWM driver
dt-bindings: pwm: Add pwm-gpio
pwm: Drop pwm_apply_state()
bus: ts-nbus: Use pwm_apply_might_sleep()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"Obsolete driver removals:
- Removed obsolete adm1021 and max6642 drivers
New drivers:
- MPS MP2891, MP2993, MP9941, and MP5920
- SPD5118 (Temperature Sensor and EEPROM)
Added device support to existing drivers:
- g762: G761
- dell-smm: Dell OptiPlex 7060
- asus-ec-sensors: ProArt X670E-CREATOR WIFI
- corsair-psu: HX1200i Series 2023 psu
- nzxt-smart2: Additional USB IS for NZXT RGB & Fan Controller
Notable enhancements and fixes:
- Removed use of i2c_match_id()
- Constified struct regmap_config where feasible
- Cleaned up amc6821 driver, and converted to use regmap and
with_info API
- Converted max6639 driver to use with_info API; added support for
additional sysfs attributes
- Fixed various sysfs attribute underflows
- Added PEC support to hwmon core, and use in lm90 and max31827
drivers
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (103 commits)
hwmon: (max6697) Fix swapped temp{1,8} critical alarms
hwmon: (max6697) Fix underflow when writing limit attributes
hwmon: Remove obsolete adm1021 and max6642 drivers
hwmon: (pmbus/ltc4286) Drop unused i2c device ids
hwmon: (g762) Initialize fans after configuring clock
hwmon: (amc6821) Add support for pwm1_mode attribute
hwmon: (amc6821) Convert to with_info API
hwmon: (amc6821) Convert to use regmap
hwmon: (amc6821) Drop unnecessary enum chips
hwmon: (amc6821) Use BIT() and GENMASK()
hwmon: (amc6821) Use tabs for column alignment in defines
hwmon: (amc6821) Reorder include files, drop unnecessary ones
hwmon: (amc6821) Add support for fan1_target and pwm1_enable mode 4
hwmon: (amc6821) Rename fan1_div to fan1_pulses
hwmon: (amc6821) Make reading and writing fan speed limits consistent
hwmon: (amc6821) Stop accepting invalid pwm values
hwmon: (w83627ehf) Fix underflows seen when writing limit attributes
hwmon: (nct6775-core) Fix underflows seen when writing limit attributes
hwmon: (lm95234) Fix underflows seen when writing limit attributes
hwmon: (adc128d818) Fix underflows seen when writing limit attributes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"This has been in development since last year's Linux Plumbers
Conference and was inspired by the need to enable support upstream for
Bluetooth/WLAN chips on Qualcomm platforms.
The main problem we're fixing is powering up devices which are
represented as separate objects in the kernel (binding to different
drivers) but which share parts of the power-up sequence and thus need
some kind of a mediator who knows the possible interactions and can
assure they don't interfere with neither device's bring up. An example
of such an inter-driver interaction is the WCN family of BT/WLAN chips
from Qualcomm of which some models require the user to observe a
certain delay between driving the bt-enable and wlan-enable GPIOs.
This is not a new problem but up to this point all attempts at
addressing it ended up hitting one wall or another and being dropped.
The main obstacle was the fact that most these attempts tried to
introduce the concept of a "power sequence" into the device-tree
bindings which breaks the main DT rule: describe the hardware, not its
behavior. The solution I proposed focuses on making the power
sequencer drivers interpret the actual HW description flexibly. More
details on that are in the linked cover letter.
The second problem fixed here is powering up PCI devices before they
are detected on the bus. This is achieved by creating special platform
devices for device-tree nodes describing hard-wired PCI devices which
bind to the so-called PCI power control drivers which enable required
resources and trigger a bus rescan once the controlled device is up
then setup the correct devlink hierarchy for power-management.
By combining the two new frameworks we implemented the power
sequencing PCI power control driver which is capable of powering up
the WLAN modules of the QCom WCN family of chipsets.
All this has spent a significant amount of time in linux-next and
enabled WLAN/BT support on several Qualcomm platforms. To further
prove that this is useful and needed: right after this was picked up
into next, I was sent a series using the subsystem for a similar
use-case on Amlogic platforms.
This contains the core power sequencing framework, the first driver,
PCI changes using the pwrseq library (blessed by Bjorn Helgaas) and
some fixes that came later"
* tag 'pwrseq-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
PCI/pwrctl: only call of_platform_populate() if CONFIG_OF is enabled
power: sequencing: simplify returning pointer without cleanup
PCI/pwrctl: Add a PCI power control driver for power sequenced devices
PCI/pwrctl: Add PCI power control core code
PCI/pwrctl: Create platform devices for child OF nodes of the port node
PCI/pwrctl: Reuse the OF node for power controlled devices
PCI: Hold the rescan mutex when scanning for the first time
power: pwrseq: add a driver for the PMU module on the QCom WCN chipsets
power: sequencing: implement the pwrseq core
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware update from Tzung-Bi Shih:
- Minor cleanup: add missing MODULE_DESCRIPTION
* tag 'tag-chrome-platform-firmware-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
firmware: google: add missing MODULE_DESCRIPTION() macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New code:
- Add "cros_ec_hwmon" driver to expose fan speed and temperature
- Add "cros_charge-control" driver to control charge thresholds and
behaviour
- Add module parameter "log_poll_period_ms" in cros_ec_debugfs for
tuning the poll period
- Support version 3 of EC_CMD_GET_NEXT_EVENT and keyboard matrix
Fixes:
- Fix a race condition in accessing MEC (Microchip EC) memory between
ACPI and kernel. Serialize the memory access by an AML (ACPI
Machine Language) mutex
- Fix an issue of wrong EC message version in cros_ec_debugfs
Misc:
- Fix kernel-doc errors and cleanups"
* tag 'tag-chrome-platform-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (28 commits)
power: supply: cros_charge-control: Fix signedness bug in charge_behaviour_store()
power: supply: cros_charge-control: Avoid accessing attributes out of bounds
power: supply: cros_charge-control: don't load if Framework control is present
power: supply: add ChromeOS EC based charge control driver
platform/chrome: cros_ec_proto: Introduce cros_ec_get_cmd_versions()
platform/chrome: Update binary interface for EC-based charge control
ACPI: battery: add devm_battery_hook_register()
dt-bindings: input: cros-ec-keyboard: Add keyboard matrix v3.0
platform/chrome: cros_ec_lpc: Handle zero length read/write
platform/chrome: cros_ec_lpc: Fix error code in cros_ec_lpc_mec_read_bytes()
platform/chrome: cros_ec_debugfs: fix wrong EC message version
platform/chrome: cros_ec_proto: update Kunit test for get_next_data_v3
platform/chrome: cros_ec_proto: add missing MODULE_DESCRIPTION() macro
hwmon: (cros_ec) Fix access to restricted __le16
hwmon: (cros_ec) Prevent read overflow in probe()
platform/chrome: cros_ec_lpc: Add quirks for Framework Laptop
platform/chrome: cros_ec_lpc: Add a new quirk for AML mutex
platform/chrome: cros_ec_lpc: Add a new quirk for ACPI id
platform/chrome: cros_ec_lpc: MEC access can use an AML mutex
platform/chrome: cros_ec_lpc: MEC access can return error code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"A couple of bug fixes.
No new features are coming for this release. I had one in progress but
decided to let it mature up until 6.12"
* tag 'tpmdd-next-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_tis_spi: add missing attpm20p SPI device ID entry
char: tpm: Fix possible memory leak in tpm_bios_measurements_open()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and related functionality:
Core:
- Make the takeover of a hrtimer based broadcast timer reliable
during CPU hot-unplug. The current implementation suffers from a
race which can lead to broadcast timer starvation in the worst
case.
- VDSO related cleanups and simplifications
- Small cleanups and enhancements all over the place
PTP:
- Replace the architecture specific base clock to clocksource, e.g.
ART to TSC, conversion function with generic functionality to avoid
exposing such internals to drivers and convert all existing drivers
over. This also allows to provide functionality which converts the
other way round in the core code based on the same parameter set.
- Provide a function to convert CLOCK_REALTIME to the base clock to
support the upcoming PPS output driver on Intel platforms.
Drivers:
- A set of Device Tree bindings for new hardware
- Cleanups and enhancements all over the place"
* tag 'timers-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/realtek: Add timer driver for rtl-otto platforms
dt-bindings: timer: Add schema for realtek,otto-timer
dt-bindings: timer: Add SOPHGO SG2002 clint
dt-bindings: timer: renesas,tmu: Add R-Car Gen2 support
dt-bindings: timer: renesas,tmu: Add RZ/G1 support
dt-bindings: timer: renesas,tmu: Add R-Mobile APE6 support
clocksource/drivers/mips-gic-timer: Correct sched_clock width
clocksource/drivers/mips-gic-timer: Refine rating computation
clocksource/drivers/sh_cmt: Address race condition for clock events
clocksource/driver/arm_global_timer: Remove unnecessary ‘0’ values from err
clocksource/drivers/arm_arch_timer: Remove unnecessary ‘0’ values from irq
tick/broadcast: Make takeover of broadcast hrtimer reliable
tick/sched: Combine WARN_ON_ONCE and print_once
x86/vdso: Remove unused include
x86/vgtod: Remove unused typedef gtod_long_t
x86/vdso: Fix function reference in comment
vdso: Add comment about reason for vdso struct ordering
vdso/gettimeofday: Clarify comment about open coded function
timekeeping: Add missing kernel-doc function comments
tick: Remove unnused tick_nohz_get_idle_calls()
...
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
|
|
Pull drm fixes from Dave Airlie:
"Oh I screwed up last week's fixes pull, and forgot to send..
Back to work, thanks to Sima for last week, not too many fixes as
expected getting close to release [ sic - Linus ], amdgpu and xe have
a couple each, and then some other misc ones.
amdgpu:
- PSR-SU fix
- Reseved VMID fix
xe:
- Use write-back caching mode for system memory on DGFX
- Do not leak object when finalizing hdcp gsc
bridge:
- adv7511 EDID irq fix
gma500:
- NULL mode fixes.
meson:
- fix resource leak"
* tag 'drm-fixes-2024-07-12' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/display: Reset freesync config before update new state"
drm/xe/display/xe_hdcp_gsc: Free arbiter on driver removal
drm/xe: Use write-back caching mode for system memory on DGFX
drm/amdgpu: reject gang submit on reserved VMIDs
drm/gma500: fix null pointer dereference in cdv_intel_lvds_get_modes
drm/gma500: fix null pointer dereference in psb_intel_lvds_get_modes
drm/meson: fix canvas release in bind function
drm/bridge: adv7511: Fix Intermittent EDID failures
|
|
The critical alarm bit for the local temperature sensor (temp1) is in
bit 7 of register 0x45 (not bit 6), and the critical alarm bit for remote
temperature sensor 7 (temp8) is in bit 6 (not bit 7).
This only affects MAX6581 since all other chips supported by this driver
do not support those critical alarms.
Fixes: 5372d2d71c46 ("hwmon: Driver for Maxim MAX6697 and compatibles")
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Using DIV_ROUND_CLOSEST() on an unbound value can result in underflows.
Indeed, module test scripts report:
temp1_max: Suspected underflow: [min=0, read 255000, written -9223372036854775808]
temp1_crit: Suspected underflow: [min=0, read 255000, written -9223372036854775808]
Fix by introducing an extra set of clamping.
Fixes: 5372d2d71c46 ("hwmon: Driver for Maxim MAX6697 and compatibles")
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
ADM1021, MAX6642, and compatible chips are supported by the lm90 driver.
Remove the obsolete stand-alone drivers to reduce maintenance overhead.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Fixes for the I2C testunit, the Renesas R-Car driver and some
MAINTAINERS corrections"
* tag 'i2c-for-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: avoid re-issued work after read message
i2c: rcar: ensure Gen3+ reset does not disturb local targets
i2c: mark HostNotify target address as used
i2c: testunit: correct Kconfig description
MAINTAINERS: VIRTIO I2C loses a maintainer, gains a reviewer
MAINTAINERS: delete entries for Thor Thayer
i2c: rcar: clear NO_RXDMA flag after resetting
i2c: rcar: bring hardware to known state when probing
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clocksource/event driver updates from Daniel Lezcano:
- Remove unnecessary local variables initialization as they will be
initialized in the code path anyway right after on the ARM arch
timer and the ARM global timer (Li kunyu)
- Fix a race condition in the interrupt leading to a deadlock on the
SH CMT driver. Note that this fix was not tested on the platform
using this timer but the fix seems reasonable enough to be picked
confidently (Niklas Söderlund)
- Increase the rating of the gic-timer and use the configured width
clocksource register on the MIPS architecture (Jiaxun Yang)
- Add the DT bindings for the TMU on the Renesas platforms (Geert
Uytterhoeven)
- Add the DT bindings for the SOPHGO SG2002 clint on RiscV (Thomas
Bonnefille)
- Add the rtl-otto timer driver along with the DT bindings for the
Realtek platform (Chris Packham)
Link: https://lore.kernel.org/all/91cd05de-4c5d-4242-a381-3b8a4fe6a2a2@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
This tag includes three fixes for the Renesas R-Car driver:
1. Ensures the device is in a known state after probing.
2. Allows clearing the NO_RXDMA flag after a reset.
3. Forces a reset before any transfer on Gen3+ platforms to
prevent disruption of the configuration during parallel
transfers.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking fixes from Jakub Kicinski:
"A quick follow up to yesterday's pull. We got a regressions report for
the bnxt patch as soon as it got to your tree. The ethtool fix is also
good to have, although it's an older regression.
Current release - regressions:
- eth: bnxt_en: fix crash in bnxt_get_max_rss_ctx_ring() on older HW
when user tries to decrease the ring count
Previous releases - regressions:
- ethtool: fix RSS setting, accept "no change" setting if the driver
doesn't support the new features
- eth: i40e: remove needless retries of NVM update, don't wait 20min
when we know the firmware update won't succeed"
* tag 'net-6.10-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()
octeontx2-af: fix issue with IPv4 match for RSS
octeontx2-af: fix issue with IPv6 ext match for RSS
octeontx2-af: fix detection of IP layer
octeontx2-af: fix a issue with cpt_lf_alloc mailbox
octeontx2-af: replace cpt slot with lf id on reg write
i40e: fix: remove needless retries of NVM update
net: ethtool: Fix RSS setting
|
|
On older chips not supporting multiple RSS contexts, reducing
ethtool channels will crash:
BUG: kernel NULL pointer dereference, address: 00000000000000b8
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 7032 Comm: ethtool Tainted: G S 6.10.0-rc4 #1
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
RIP: 0010:bnxt_get_max_rss_ctx_ring+0x4c/0x90 [bnxt_en]
Code: c3 d3 eb 4c 8b 83 38 01 00 00 48 8d bb 38 01 00 00 4c 39 c7 74 42 41 8d 54 24 ff 31 c0 0f b7 d2 4c 8d 4c 12 02 66 85 ed 74 1d <49> 8b 90 b8 00 00 00 49 8d 34 11 0f b7 0a 66 39 c8 0f 42 c1 48 83
RSP: 0018:ffffaaa501d23ba8 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff8efdf600c940 RCX: 0000000000000000
RDX: 000000000000007f RSI: ffffffffacf429c4 RDI: ffff8efdf600ca78
RBP: 0000000000000080 R08: 0000000000000000 R09: 0000000000000100
R10: 0000000000000001 R11: ffffaaa501d238c0 R12: 0000000000000080
R13: 0000000000000000 R14: ffff8efdf600c000 R15: 0000000000000006
FS: 00007f977a7d2740(0000) GS:ffff8f041f840000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000b8 CR3: 00000002320aa004 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die_body+0x15/0x60
? page_fault_oops+0x157/0x440
? do_user_addr_fault+0x60/0x770
? _raw_spin_lock_irqsave+0x12/0x40
? exc_page_fault+0x61/0x120
? asm_exc_page_fault+0x22/0x30
? bnxt_get_max_rss_ctx_ring+0x4c/0x90 [bnxt_en]
? bnxt_get_max_rss_ctx_ring+0x25/0x90 [bnxt_en]
bnxt_set_channels+0x9d/0x340 [bnxt_en]
ethtool_set_channels+0x14b/0x210
__dev_ethtool+0xdf8/0x2890
? preempt_count_add+0x6a/0xa0
? percpu_counter_add_batch+0x23/0x90
? filemap_map_pages+0x417/0x4a0
? avc_has_extended_perms+0x185/0x420
? __pfx_udp_ioctl+0x10/0x10
? sk_ioctl+0x55/0xf0
? kmalloc_trace_noprof+0xe0/0x210
? dev_ethtool+0x54/0x170
dev_ethtool+0xa2/0x170
dev_ioctl+0xbe/0x530
sock_do_ioctl+0xa3/0xf0
sock_ioctl+0x20d/0x2e0
bp->rss_ctx_list is not initialized if the chip or firmware does not
support multiple RSS contexts. Fix it by adding a check in
bnxt_get_max_rss_ctx_ring() before proceeding to reference
bp->rss_ctx_list.
Fixes: 0d1b7d6c9274 ("bnxt: fix crashes when reducing ring count with active RSS contexts")
Reported-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/netdev/ZpFEJeNpwxW1aW9k@gmail.com/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240712175318.166811-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- qcom: Skip retention level for rpmhpd's
* tag 'pmdomain-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: qcom: rpmhpd: Skip retention level for Power Domains
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- davinci_mmc: Prevent transmitted data size from exceeding sgm's
length
- sdhci: Fix max_seg_size for 64KiB PAGE_SIZE
* tag 'mmc-v6.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: davinci_mmc: Prevent transmitted data size from exceeding sgm's length
mmc: sdhci: Fix max_seg_size for 64KiB PAGE_SIZE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of these changes are Qualcomm SoC specific and came in just after
I sent out the last set of fixes. This includes two regression fixes
for SoC drivers, a defconfig change to ensure the Lenovo X13s is
usable and 11 changes to DT files to fix regressions and minor
platform specific issues.
Tony and Chunyan step back from their respective maintainership roles
on the omap and unisoc platforms, and Christophe in turn takes over
maintaining some of the Freescale SoC drivers that he has been taking
care of in practice already.
Lastly, there are two trivial fixes for the davinci and sunxi
platforms"
* tag 'arm-fixes-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Update FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY
MAINTAINERS: Add more maintainers for omaps
ARM: davinci: Convert comma to semicolon
MAINTAINERS: Move myself from SPRD Maintainer to Reviewer
Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"
arm64: dts: qcom: qdu1000: Fix LLCC reg property
arm64: dts: qcom: sm6115: add iommu for sdhc_1
arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording
arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping
soc: qcom: pmic_glink: disable UCSI on sc8280xp
arm64: defconfig: enable Elan i2c-hid driver
arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset
arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on
arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI
arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer
arm64: dts: allwinner: Fix PMIC interrupt number
arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD
arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers
arm64: dts: qcom: sc8180x: Fix LLCC reg property again
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are some small remaining driver fixes for 6.10-final that have
all been in linux-next for a while and resolve reported issues.
Included in here are:
- mei driver fixes (and a spelling fix at the end just to be clean)
- iio driver fixes for reported problems
- fastrpc bugfixes
- nvmem small fixes"
* tag 'char-misc-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: vsc: Fix spelling error
mei: vsc: Enhance SPI transfer of IVSC ROM
mei: vsc: Utilize the appropriate byte order swap function
mei: vsc: Prevent timeout error with added delay post-firmware download
mei: vsc: Enhance IVSC chipset stability during warm reboot
nvmem: core: limit cell sysfs permissions to main attribute ones
nvmem: core: only change name to fram for current attribute
nvmem: meson-efuse: Fix return value of nvmem callbacks
nvmem: rmem: Fix return value of rmem_read()
misc: microchip: pci1xxxx: Fix return value of nvmem callbacks
hpet: Support 32-bit userspace
misc: fastrpc: Restrict untrusted app to attach to privileged PD
misc: fastrpc: Fix ownership reassignment of remote heap
misc: fastrpc: Fix memory leak in audio daemon attach operation
misc: fastrpc: Avoid updating PD type for capability request
misc: fastrpc: Copy the complete capability structure to user
misc: fastrpc: Fix DSP capabilities request
iio: light: apds9306: Fix error handing
iio: trigger: Fix condition for own trigger
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small serial driver fixes for 6.10-final. Included in
here are:
- qcom-geni fixes for a much much much discussed issue and everyone
now seems to be agreed that this is the proper way forward to
resolve the reported lockups
- imx serial driver bugfixes
- 8250_omap errata fix
- ma35d1 serial driver bugfix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: qcom-geni: do not kill the machine on fifo underrun
serial: qcom-geni: fix hard lockup on buffer flush
serial: qcom-geni: fix soft lockup on sw flow control and suspend
serial: imx: ensure RTS signal is not left active after shutdown
tty: serial: ma35d1: Add a NULL check for of_node
serial: 8250_omap: Fix Errata i2310 with RX FIFO level check
serial: imx: only set receiver level if it is zero
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for
6.10-final. Included in here are:
- new usb-serial device ids for reported devices
- syzbot-triggered duplicate endpoint bugfix
- gadget bugfix for configfs memory overwrite
- xhci resume bugfix
- new device quirk added
- usb core error path bugfix
All of these have been in linux-next (most for a while) with no
reported issues"
* tag 'usb-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: mos7840: fix crash on resume
USB: serial: option: add Rolling RW350-GL variants
USB: serial: option: add support for Foxconn T99W651
USB: serial: option: add Netprisma LCUK54 series modules
usb: gadget: configfs: Prevent OOB read/write in usb_string_copy()
usb: dwc3: pci: add support for the Intel Panther Lake
usb: core: add missing of_node_put() in usb_of_has_devices_or_graph
USB: Add USB_QUIRK_NO_SET_INTF quirk for START BP-850k
USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor
xhci: always resume roothubs if xHC was reset during resume
USB: serial: option: add Telit generic core-dump composition
USB: serial: option: add Fibocom FM350-GL
USB: serial: option: add Telit FN912 rmnet compositions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes here are small device-specific fixes for ASoC
SOF / Intel and usual HD-audio quirks.
The only significant high LOC is found in the Cirrus firmware driver,
but all those are for hardening against malicious firmware blobs, and
they look fine for taking as a last minute fix, too"
* tag 'sound-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Enable Mute LED on HP 250 G7
firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files
ALSA: hda/realtek: Limit mic boost on VAIO PRO PX
ALSA: hda: cs35l41: Fix swapped l/r audio channels for Lenovo ThinBook 13x Gen4
ASoC: SOF: Intel: hda-pcm: Limit the maximum number of periods by MAX_BDL_ENTRIES
ASoC: rt711-sdw: add missing readable registers
ASoC: SOF: Intel: hda: fix null deref on system suspend entry
ALSA: hda/realtek: add quirk for Clevo V5[46]0TU
firmware: cs_dsp: Prevent buffer overrun when processing V2 alg headers
firmware: cs_dsp: Validate payload length before processing block
firmware: cs_dsp: Return error if block header overflows file
firmware: cs_dsp: Fix overflow checking of wmfw header
|
|
The timer/counter block on the Realtek SoCs provides up to 5 timers. It
also includes a watchdog timer which is handled by the
realtek_otto_wdt.c driver.
One timer will be used per CPU as a local clock event generator. An
additional timer will be used as an overal stable clocksource.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20240710043524.1535151-8-chris.packham@alliedtelesis.co.nz
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Counter width of GIC is configurable and can be read from a
register.
Use width value from the register for sched_clock.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://lore.kernel.org/r/20240612-mips-clks-v2-7-a57e6f49f3db@flygoat.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
It is a good clocksource which usually go as fast as CPU core
and have a low access latency, so raise the base of rating
from Good to desired when we know that it has a stable frequency.
Increase frequency addend dividend to 10000000 (10MHz) to
reasonably accommodate multi GHz level clock, also cap rating
within current level.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://lore.kernel.org/r/20240612-mips-clks-v2-6-a57e6f49f3db@flygoat.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
There is a race condition in the CMT interrupt handler. In the interrupt
handler the driver sets a driver private flag, FLAG_IRQCONTEXT. This
flag is used to indicate any call to set_next_event() should not be
directly propagated to the device, but instead cached. This is done as
the interrupt handler itself reprograms the device when needed before it
completes and this avoids this operation to take place twice.
It is unclear why this design was chosen, my suspicion is to allow the
struct clock_event_device.event_handler callback, which is called while
the FLAG_IRQCONTEXT is set, can update the next event without having to
write to the device twice.
Unfortunately there is a race between when the FLAG_IRQCONTEXT flag is
set and later cleared where the interrupt handler have already started to
write the next event to the device. If set_next_event() is called in
this window the value is only cached in the driver but not written. This
leads to the board to misbehave, or worse lockup and produce a splat.
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: 0-...!: (0 ticks this GP) idle=f5e0/0/0x0 softirq=519/519 fqs=0 (false positive?)
rcu: (detected by 1, t=6502 jiffies, g=-595, q=77 ncpus=2)
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.10.0-rc5-arm64-renesas-00019-g74a6f86eaf1c-dirty #20
Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : tick_check_broadcast_expired+0xc/0x40
lr : cpu_idle_poll.isra.0+0x8c/0x168
sp : ffff800081c63d70
x29: ffff800081c63d70 x28: 00000000580000c8 x27: 00000000bfee5610
x26: 0000000000000027 x25: 0000000000000000 x24: 0000000000000000
x23: ffff00007fbb9100 x22: ffff8000818f1008 x21: ffff8000800ef07c
x20: ffff800081c79ec0 x19: ffff800081c70c28 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffc2c717d8
x14: 0000000000000000 x13: ffff000009c18080 x12: ffff8000825f7fc0
x11: 0000000000000000 x10: ffff8000818f3cd4 x9 : 0000000000000028
x8 : ffff800081c79ec0 x7 : ffff800081c73000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : ffff7ffffe286000 x3 : 0000000000000000
x2 : ffff7ffffe286000 x1 : ffff800082972900 x0 : ffff8000818f1008
Call trace:
tick_check_broadcast_expired+0xc/0x40
do_idle+0x9c/0x280
cpu_startup_entry+0x34/0x40
kernel_init+0x0/0x11c
do_one_initcall+0x0/0x260
__primary_switched+0x80/0x88
rcu: rcu_preempt kthread timer wakeup didn't happen for 6501 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402
rcu: Possible timer handling issue on cpu=0 timer-softirq=262
rcu: rcu_preempt kthread starved for 6502 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:I stack:0 pid:15 tgid:15 ppid:2 flags:0x00000008
Call trace:
__switch_to+0xbc/0x100
__schedule+0x358/0xbe0
schedule+0x48/0x148
schedule_timeout+0xc4/0x138
rcu_gp_fqs_loop+0x12c/0x764
rcu_gp_kthread+0x208/0x298
kthread+0x10c/0x110
ret_from_fork+0x10/0x20
The design have been part of the driver since it was first merged in
early 2009. It becomes increasingly harder to trigger the issue the
older kernel version one tries. It only takes a few boots on v6.10-rc5,
while hundreds of boots are needed to trigger it on v5.10.
Close the race condition by using the CMT channel lock for the two
competing sections. The channel lock was added to the driver after its
initial design.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20240702190230.3825292-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The 'err' variable is initialized whatever the code path, it is
pointless to initialize it when it is declared.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Link: https://lore.kernel.org/r/20240705052159.22235-1-kunyu@nfschina.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The irq variable is initialized whatever the code path, it is poinless
to initialize when declaring it.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Link: https://lore.kernel.org/r/20240705040729.21961-1-kunyu@nfschina.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
While performing RSS based on IPv4, packets with
IPv4 options are not being considered. Adding changes
to match both plain IPv4 and IPv4 with option header.
Fixes: 41a7aa7b800d ("octeontx2-af: NIX Rx flowkey configuration for RSS")
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While performing RSS based on IPv6, extension ltype
is not being considered. This will be problem for
fragmented packets or packets with extension header.
Adding changes to match IPv6 ext header along with IPv6
ltype.
Fixes: 41a7aa7b800d ("octeontx2-af: NIX Rx flowkey configuration for RSS")
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Checksum and length checks are not enabled for IPv4 header with
options and IPv6 with extension headers.
To fix this a change in enum npc_kpu_lc_ltype is required which will
allow adjustment of LTYPE_MASK to detect all types of IP headers.
Fixes: 21e6699e5cd6 ("octeontx2-af: Add NPC KPU profile")
Signed-off-by: Michal Mazur <mmazur2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes CPT_LF_ALLOC mailbox error due to
incompatible mailbox message format. Specifically, it
corrects the `blkaddr` field type from `int` to `u8`.
Fixes: de2854c87c64 ("octeontx2-af: Mailbox changes for 98xx CPT block")
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace slot id with global CPT lf id on reg read/write as
CPTPF/VF driver would send slot number instead of global
lf id in the reg offset. And also update the mailbox response
with the global lf's register offset.
Fixes: ae454086e3c2 ("octeontx2-af: add mailbox interface for CPT")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The I.MX SDHCI driver assumes that the frequency of the 'per' clock
can be obtained even on disabled clocks, which is not always the case.
According to 'clk_get_rate' documentation, it is only valid
once the clock source has been enabled.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240708121018.246476-3-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In case of S32G based platforms, GPIO CD used for card detect
wake mechanism is not available.
For this scenario the newly introduced flag
'ESDHC_FLAG_SKIP_CD_WAKE' is used.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240708121018.246476-2-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The to-be-fixed commit rightfully prevented that the registers will be
cleared. However, the index must be cleared. Otherwise a read message
will re-issue the last work. Fix it and add a comment describing the
situation.
Fixes: c422b6a63024 ("i2c: testunit: don't erase registers after STOP")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.10-2024-07-11:
amdgpu:
- PSR-SU fix
- Reseved VMID fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240712005534.803064-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Use write-back caching mode for system memory on DGFX (Thomas)
Driver Changes:
- Do not leak object when finalizing hdcp gsc (Nirmoy)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/vgqz35btnxdddko3byrgww5ii36wig2tvondg2p3j3b3ourj4i@rqgolll3wwkh
|
|
This change caused PSR SU panels to not read from their remote fb,
preventing us from entering self-refresh. It is a regression.
This reverts commit 6b8487cdf9fc7bae707519ac5b5daeca18d1e85b.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove wrong EIO to EGAIN conversion and pass all errors as is.
After commit 230f3d53a547 ("i40e: remove i40e_status"), which should only
replace F/W specific error codes with Linux kernel generic, all EIO errors
suddenly started to be converted into EAGAIN which leads nvmupdate to retry
until it timeouts and sometimes fails after more than 20 minutes in the
middle of NVM update, so NVM becomes corrupted.
The bug affects users only at the time when they try to update NVM, and
only F/W versions that generate errors while nvmupdate. For example, X710DA2
with 0x8000ECB7 F/W is affected, but there are probably more...
Command for reproduction is just NVM update:
./nvmupdate64
In the log instead of:
i40e_nvmupd_exec_aq err I40E_ERR_ADMIN_QUEUE_ERROR aq_err I40E_AQ_RC_ENOMEM)
appears:
i40e_nvmupd_exec_aq err -EIO aq_err I40E_AQ_RC_ENOMEM
i40e: eeprom check failed (-5), Tx/Rx traffic disabled
The problematic code did silently convert EIO into EAGAIN which forced
nvmupdate to ignore EAGAIN error and retry the same operation until timeout.
That's why NVM update takes 20+ minutes to finish with the fail in the end.
Fixes: 230f3d53a547 ("i40e: remove i40e_status")
Co-developed-by: Kelvin Kang <kelvin.kang@intel.com>
Signed-off-by: Kelvin Kang <kelvin.kang@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240710224455.188502-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
R-Car Gen3+ needs a reset before every controller transfer. That erases
configuration of a potentially in parallel running local target
instance. To avoid this disruption, avoid controller transfers if a
local target is running. Also, disable SMBusHostNotify because it
requires being a controller and local target at the same time.
Fixes: 3b770017b03a ("i2c: rcar: handle RXDMA HW behaviour on Gen3")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mikulas Patocka:
- Fix broken discard for device mapper VDO target
* tag 'for-6.10/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm vdo: replace max_discard_sectors with max_hw_discard_sectors
|
