summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-05-21watchdog: sp805: disable watchdog on removeEliav Farber
Disable the watchdog if it is active while removing the module. It is necessary in order to prevent a reset in case watchdog hw was running before the removal. Signed-off-by: Eliav Farber <farbere@amazon.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220414054233.1357-2-farbere@amazon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-21watchdog: da9063: optionally disable watchdog during suspendPrimoz Fiser
Optionally disable watchdog during suspend (if enabled) and re-enable it upon resume. This enables boards to sleep without being interrupted by the watchdog. This patch is based on commit f6c98b08381c ("watchdog: da9062: add power management ops") and commit 8541673d2a5f ("watchdog: da9062: fix power management ops") and brings the same functionality to DA9063. Signed-off-by: Primoz Fiser <primoz.fiser@norik.com> Reviewed-by: Adam Thomson <DLG-Adam.Thomson.Opensource@dm.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220422072713.3172345-2-primoz.fiser@norik.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-08watchdog: Add watchdog driver for Sunplus SP7021Xiantao Hu
Sunplus SP7021 requires watchdog timer support. Add watchdog driver to enable this. Signed-off-by: Xiantao Hu <xt.hu@cqplus1.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220324031805.61316-3-xt.hu@cqplus1.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-08watchdog: rzg2l_wdt: Add set_timeout callbackBiju Das
This patch adds support for set_timeout callback. Once WDT is started, the WDT cycle setting register(WDTSET) can be updated only after issuing a module reset. Otherwise, it will ignore the writes and will hold the previous value. This patch updates the WDTSET register if it is active. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220225175320.11041-8-biju.das.jz@bp.renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-08watchdog: rzg2l_wdt: Use force reset for WDT resetBiju Das
This patch uses the force reset(WDTRSTB) for triggering WDT reset for restart callback. This method(ie, Generate Reset (WDTRSTB) Signal on parity error)is faster compared to the overflow method for triggering watchdog reset. Overflow method: reboot: Restarting system Reboot failed -- System halted NOTICE: BL2: v2.5(release):v2.5/rzg2l-1.00-27-gf48f1440c Parity error method: reboot: Restarting system NOTICE: BL2: v2.5(release):v2.5/rzg2l-1.00-27-gf48f1440c Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220225175320.11041-7-biju.das.jz@bp.renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-08watchdog: rzg2l_wdt: Add error check for reset_control_deassertBiju Das
If reset_control_deassert() fails, then we won't be able to access the device registers. Therefore check the return code of reset_control_deassert() and bailout in case of error. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220225175320.11041-6-biju.das.jz@bp.renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-08watchdog: rzg2l_wdt: Fix reset control imbalanceBiju Das
Both rzg2l_wdt_probe() and rzg2l_wdt_start() calls reset_control_ deassert() which results in a reset control imbalance. This patch fixes reset control imbalance by removing reset_control_ deassert() from rzg2l_wdt_start() and replaces reset_control_assert with reset_control_reset in rzg2l_wdt_stop() as watchdog module can be stopped only by a module reset. This change will allow us to restart WDT after stop() by configuring WDT timeout and enable registers. Fixes: 2cbc5cd0b55fa2 ("watchdog: Add Watchdog Timer driver for RZ/G2L") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220225175320.11041-5-biju.das.jz@bp.renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-08watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait context'Biju Das
This patch fixes the issue 'BUG: Invalid wait context' during restart() callback by using clk_prepare_enable() instead of pm_runtime_get_sync() for turning on the clocks during restart. This issue is noticed when testing with renesas_defconfig. [ 42.213802] reboot: Restarting system [ 42.217860] [ 42.219364] ============================= [ 42.223368] [ BUG: Invalid wait context ] [ 42.227372] 5.17.0-rc5-arm64-renesas-00002-g10393723e35e #522 Not tainted [ 42.234153] ----------------------------- [ 42.238155] systemd-shutdow/1 is trying to lock: [ 42.242766] ffff00000a650828 (&genpd->mlock){+.+.}-{3:3}, at: genpd_lock_mtx+0x14/0x20 [ 42.250709] other info that might help us debug this: [ 42.255753] context-{4:4} [ 42.258368] 2 locks held by systemd-shutdow/1: [ 42.262806] #0: ffff80000944e1c8 (system_transition_mutex#2){+.+.}-{3:3}, at: __do_sys_reboot+0xd0/0x250 [ 42.272388] #1: ffff8000094c4e40 (rcu_read_lock){....}-{1:2}, at: atomic_notifier_call_chain+0x0/0x150 [ 42.281795] stack backtrace: [ 42.284672] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.17.0-rc5-arm64-renesas-00002-g10393723e35e #522 [ 42.294577] Hardware name: Renesas SMARC EVK based on r9a07g044c2 (DT) [ 42.301096] Call trace: [ 42.303538] dump_backtrace+0xcc/0xd8 [ 42.307203] show_stack+0x14/0x30 [ 42.310517] dump_stack_lvl+0x88/0xb0 [ 42.314180] dump_stack+0x14/0x2c [ 42.317492] __lock_acquire+0x1b24/0x1b50 [ 42.321502] lock_acquire+0x120/0x3a8 [ 42.325162] __mutex_lock+0x84/0x8f8 [ 42.328737] mutex_lock_nested+0x30/0x58 [ 42.332658] genpd_lock_mtx+0x14/0x20 [ 42.336319] genpd_runtime_resume+0xc4/0x228 [ 42.340587] __rpm_callback+0x44/0x170 [ 42.344337] rpm_callback+0x64/0x70 [ 42.347824] rpm_resume+0x4e0/0x6b8 [ 42.351310] __pm_runtime_resume+0x50/0x78 [ 42.355404] rzg2l_wdt_restart+0x28/0x68 [ 42.359329] watchdog_restart_notifier+0x1c/0x30 [ 42.363943] atomic_notifier_call_chain+0x94/0x150 [ 42.368732] do_kernel_restart+0x24/0x30 [ 42.372652] machine_restart+0x44/0x70 [ 42.376399] kernel_restart+0x3c/0x60 [ 42.380058] __do_sys_reboot+0x228/0x250 [ 42.383977] __arm64_sys_reboot+0x20/0x28 [ 42.387983] invoke_syscall+0x40/0xf8 Fixes: 2cbc5cd0b55fa2 ("watchdog: Add Watchdog Timer driver for RZ/G2L") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220225175320.11041-4-biju.das.jz@bp.renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-08watchdog: rzg2l_wdt: Fix Runtime PM usageBiju Das
Both rzg2l_wdt_probe() and rzg2l_wdt_start() calls pm_runtime_get() which results in a usage counter imbalance. This patch fixes this issue by removing pm_runtime_get() call from probe. Fixes: 2cbc5cd0b55fa2 ("watchdog: Add Watchdog Timer driver for RZ/G2L") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220225175320.11041-3-biju.das.jz@bp.renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-08watchdog: rzg2l_wdt: Fix 32bit overflow issueBiju Das
The value of timer_cycle_us can be 0 due to 32bit overflow. For eg:- If we assign the counter value "0xfff" for computing maxval. This patch fixes this issue by appending ULL to 1024, so that it is promoted to 64bit. This patch also fixes the warning message, 'watchdog: Invalid min and max timeout values, resetting to 0!'. Fixes: 2cbc5cd0b55fa2 ("watchdog: Add Watchdog Timer driver for RZ/G2L") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220225175320.11041-2-biju.das.jz@bp.renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-08watchdog: mtk_wdt: mt7986: Add toprgu reset controller supportSam Shih
Besides watchdog, the mt7986 toprgu module also provides software reset functionality for various peripheral subsystems (eg, ethernet, pcie, and connectivity) Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220105100456.7126-3-sam.shih@mediatek.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-08watchdog: bcm7038_wdt: Support BCM6345 compatible stringRafał Miłecki
A new "compatible" value has been added in the commit 17fffe91ba36 ("dt-bindings: watchdog: Add BCM6345 compatible to BCM7038 binding"). It's meant to be used for BCM63xx SoCs family but hardware block can be programmed just like the 7038 one. Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220216063408.23168-1-zajec5@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-08watchdog: mediatek: mt8186: add wdt supportRunyang Chen
Support MT8186 watchdog device. Signed-off-by: Runyang Chen <runyang.chen@mediatek.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220301054405.25021-4-rex-bc.chen@mediatek.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-01Merge tag 'irq_urgent_for_v5.18_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Borislav Petkov: - Fix locking when accessing device MSI descriptors * tag 'irq_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bus: fsl-mc-msi: Fix MSI descriptor mutex lock for msi_first_desc()
2022-04-30Merge tag 'driver-core-5.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some small driver core and kernfs fixes for some reported problems. They include: - kernfs regression that is causing oopses in 5.17 and newer releases - topology sysfs fixes for a few small reported problems. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kernfs: fix NULL dereferencing in kernfs_remove topology: Fix up build warning in topology_is_visible() arch_topology: Do not set llc_sibling if llc_id is invalid topology: make core_mask include at least cluster_siblings topology/sysfs: Hide PPIN on systems that do not support it.
2022-04-30Merge tag 'char-misc-5.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a small number of char/misc/other driver fixes for 5.18-rc5 Nothing major in here, this is mostly IIO driver fixes along with some other small things: - at25 driver fix for systems without a dma-able stack - phy driver fixes for reported issues - binder driver fixes for reported issues All of these have been in linux-next without any reported problems" * tag 'char-misc-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (31 commits) eeprom: at25: Use DMA safe buffers binder: Gracefully handle BINDER_TYPE_FDA objects with num_fds=0 binder: Address corner cases in deferred copy and fixup phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe() iio: imu: inv_icm42600: Fix I2C init possible nack iio: dac: ltc2688: fix voltage scale read interconnect: qcom: sdx55: Drop IP0 interconnects interconnect: qcom: sc7180: Drop IP0 interconnects phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks bus: mhi: host: pci_generic: Flush recovery worker during freeze bus: mhi: host: pci_generic: Add missing poweroff() PM callback phy: ti: tusb1210: Fix an error handling path in tusb1210_probe() phy: samsung: exynos5250-sata: fix missing device put in probe error paths phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe phy: ti: Fix missing of_node_put in ti_pipe3_get_sysctrl() phy: ti: tusb1210: Make tusb1210_chg_det_states static iio:dac:ad3552r: Fix an IS_ERR() vs NULL check iio: sx9324: Fix default precharge internal resistance register ...
2022-04-30Merge tag 'tty-5.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small serial driver fixes, and a larger number of GSM line discipline fixes for 5.18-rc5. These include: - lots of tiny n_gsm fixes for issues to resolve a number of reported problems. Seems that people are starting to actually use this code again. - 8250 driver fixes for some devices - imx serial driver fix - amba-pl011 driver fix All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (27 commits) tty: n_gsm: fix sometimes uninitialized warning in gsm_dlci_modem_output() serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device serial: 8250: Also set sticky MCR bits in console restoration tty: n_gsm: fix software flow control handling tty: n_gsm: fix invalid use of MSC in advanced option tty: n_gsm: fix broken virtual tty handling Revert "serial: sc16is7xx: Clear RS485 bits in the shutdown" tty: n_gsm: fix missing update of modem controls after DLCI open serial: 8250: Fix runtime PM for start_tx() for empty buffer serial: imx: fix overrun interrupts in DMA mode serial: amba-pl011: do not time out prematurely when draining tx fifo tty: n_gsm: fix incorrect UA handling tty: n_gsm: fix reset fifo race condition tty: n_gsm: fix missing tty wakeup in convergence layer type 2 tty: n_gsm: fix wrong signal octets encoding in MSC tty: n_gsm: fix wrong command frame length field encoding tty: n_gsm: fix wrong command retry handling tty: n_gsm: fix missing explicit ldisc flush tty: n_gsm: fix wrong DLCI release order tty: n_gsm: fix insufficient txframe size ...
2022-04-30Merge tag 'usb-5.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 5.18-rc5 for some reported issues and new quirks. They include: - dwc3 driver fixes - xhci driver fixes - typec driver fixes - new usb-serial driver ids - added new USB devices to existing quirk tables - other tiny fixes All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits) usb: phy: generic: Get the vbus supply usb: dwc3: gadget: Return proper request status usb: dwc3: pci: add support for the Intel Meteor Lake-P usb: dwc3: core: Only handle soft-reset in DCTL usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind() usb: misc: eud: Fix an error handling path in eud_probe() usb: core: Don't hold the device lock while sleeping in do_proc_control() usb: dwc3: Try usb-role-switch first in dwc3_drd_init usb: dwc3: core: Fix tx/rx threshold settings usb: mtu3: fix USB 3.0 dual-role-switch from device to host xhci: Enable runtime PM on second Alderlake controller usb: dwc3: fix backwards compat with rockchip devices dt-bindings: usb: samsung,exynos-usb2: add missing required reg usb: misc: fix improper handling of refcount in uss720_probe() USB: Fix ehci infinite suspend-resume loop issue in zhaoxin usb: typec: tcpm: Fix undefined behavior due to shift overflowing the constant usb: typec: rt1719: Fix build error without CONFIG_POWER_SUPPLY usb: typec: ucsi: Fix role swapping usb: typec: ucsi: Fix reuse of completion structure usb: xhci: tegra:Fix PM usage reference leak of tegra_xusb_unpowergate_partitions ...
2022-04-30Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One fix for an endless error loop with the target driver affecting tapes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: pscsi: Set SCF_TREAT_READ_AS_NORMAL flag only if there is valid data
2022-04-29Merge tag 'soc-fixes-5.18-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: - A fix for a regression caused by the previous set of bugfixes changing tegra and at91 pinctrl properties. More work is needed to figure out what this should actually be, but a revert makes it work for the moment. - Defconfig regression fixes for tegra after renamed symbols - Build-time warning and static checker fixes for imx, op-tee, sunxi, meson, at91, and omap - More at91 DT fixes for audio, regulator and spi nodes - A regression fix for Renesas Hyperflash memory probe - A stability fix for amlogic boards, modifying the allowed cpufreq states - Multiple fixes for system suspend on omap2+ - DT fixes for various i.MX bugs - A probe error fix for imx6ull-colibri MMC - A MAINTAINERS file entry for samsung bug reports * tag 'soc-fixes-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits) Revert "arm: dts: at91: Fix boolean properties with values" bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create() Revert "arm64: dts: tegra: Fix boolean properties with values" arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock ARM: dts: imx6ull-colibri: fix vqmmc regulator MAINTAINERS: add Bug entry for Samsung and memory controller drivers memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35 ARM: dts: am3517-evm: Fix misc pinmuxing ARM: dts: am33xx-l4: Add missing touchscreen clock properties ARM: dts: Fix mmc order for omap3-gta04 ARM: dts: at91: fix pinctrl phandles ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name ARM: dts: at91: Describe regulators on at91sam9g20ek ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek ARM: dts: at91: Fix boolean properties with values ARM: dts: at91: use generic node name for dataflash ARM: dts: at91: align SPI NOR node name with dtschema ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines ...
2022-04-29Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A semi-large pile of clk driver fixes this time around. Nothing is touching the core so these fixes are fairly well contained to specific devices that use these clk drivers. - Some Allwinner SoC fixes to gracefully handle errors and mark an RTC clk as critical so that the RTC keeps ticking. - Fix AXI bus clks and RTC clk design for Microchip PolarFire SoC driver introduced this cycle. This has some devicetree bits acked by riscv maintainers. We're fixing it now so that the prior bindings aren't released in a major kernel version. - Remove a reset on Microchip PolarFire SoCs that broke when enabling CONFIG_PM. - Set a min/max for the Qualcomm graphics clk. This got broken by the clk rate range patches introduced this cycle" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource() clk: sunxi-ng: sun6i-rtc: Mark rtc-32k as critical riscv: dts: microchip: reparent mpfs clocks clk: microchip: mpfs: add RTCREF clock control clk: microchip: mpfs: re-parent the configurable clocks dt-bindings: rtc: add refclk to mpfs-rtc dt-bindings: clk: mpfs: add defines for two new clocks dt-bindings: clk: mpfs document msspll dri registers riscv: dts: microchip: fix usage of fic clocks on mpfs clk: microchip: mpfs: mark CLK_ATHENA as critical clk: microchip: mpfs: fix parents for FIC clocks clk: qcom: clk-rcg2: fix gfx3d frequency calculation clk: microchip: mpfs: don't reset disabled peripherals clk: sunxi-ng: fix not NULL terminated coccicheck error
2022-04-29Merge tag 'random-5.18-rc5-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator fixes from Jason Donenfeld: - Eric noticed that the memmove() in crng_fast_key_erasure() was bogus, so this has been changed to a memcpy() and the confusing situation clarified with a detailed comment. - [Half]SipHash documentation updates from Bagas and Eric, after Eric pointed out that the use of HalfSipHash in random.c made a bit of the text potentially misleading. * tag 'random-5.18-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: Documentation: siphash: disambiguate HalfSipHash algorithm from hsiphash functions Documentation: siphash: enclose HalfSipHash usage example in the literal block Documentation: siphash: convert danger note to warning for HalfSipHash random: document crng_fast_key_erasure() destination possibility
2022-04-29Merge tag 'imx-fixes-5.18-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.18, 2nd round: - Fix one sparse warning on imx-weim driver. - Fix vqmmc regulator to get UHS-I mode work on imx6ull-colibri board. - Add missing 32.768 kHz PMIC clock for imx8mn-ddr4-evk board to fix bd718xx-clk probe error. * tag 'imx-fixes-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock ARM: dts: imx6ull-colibri: fix vqmmc regulator bus: imx-weim: make symbol 'weim_of_notifier' static Link: https://lore.kernel.org/r/20220426013427.GB14615@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-29Merge tag 'sunxi-fixes-for-5.18-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Fix return value in RSB bus driver * tag 'sunxi-fixes-for-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create() Link: https://lore.kernel.org/r/Ymbkd+/dDmRJz66w@kista.localdomain Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-28Merge tag 'drm-fixes-2022-04-29' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Another relatively quiet week, amdgpu leads the way, some i915 display fixes, and a single sunxi fix. amdgpu: - Runtime pm fix - DCN memory leak fix in error path - SI DPM deadlock fix - S0ix fix amdkfd: - GWS fix - GWS support for CRIU i915: - Fix #5284: Backlight control regression on XMG Core 15 e21 - Fix black display plane on Acer One AO532h - Two smaller display fixes sunxi: - Single fix removing applying PHYS_OFFSET twice" * tag 'drm-fixes-2022-04-29' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: keep mmhub clock gating being enabled during s2idle suspend drm/amd/pm: fix the deadlock issue observed on SI drm/amd/display: Fix memory leak in dcn21_clock_source_create drm/amdgpu: don't runtime suspend if there are displays attached (v3) drm/amdkfd: CRIU add support for GWS queues drm/amdkfd: Fix GWS queue count drm/sun4i: Remove obsolete references to PHYS_OFFSET drm/i915/fbc: Consult hw.crtc instead of uapi.crtc drm/i915: Fix SEL_FETCH_PLANE_*(PIPE_B+) register addresses drm/i915: Check EDID for HDR static metadata when choosing blc drm/i915: Fix DISP_POS_Y and DISP_HEIGHT defines
2022-04-29Merge tag 'amd-drm-fixes-5.18-2022-04-27' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.18-2022-04-27: amdgpu: - Runtime pm fix - DCN memory leak fix in error path - SI DPM deadlock fix - S0ix fix amdkfd: - GWS fix - GWS support for CRIU Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220428023232.5794-1-alexander.deucher@amd.com
2022-04-29Merge tag 'drm-intel-fixes-2022-04-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix #5284: Backlight control regression on XMG Core 15 e21 - Fix black display plane on Acer One AO532h - Two smaller display fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Ymotel5VfZUrJahf@jlahtine-mobl.ger.corp.intel.com
2022-04-29Merge tag 'drm-misc-fixes-2022-04-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.18-rc5: - Single fix removing applying PHYS_OFFSET twice in sunxi. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f692bb62-5620-1868-91b7-dffb8d6f9175@linux.intel.com
2022-04-28Merge tag 'net-5.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, bpf and netfilter. Current release - new code bugs: - bridge: switchdev: check br_vlan_group() return value - use this_cpu_inc() to increment net->core_stats, fix preempt-rt Previous releases - regressions: - eth: stmmac: fix write to sgmii_adapter_base Previous releases - always broken: - netfilter: nf_conntrack_tcp: re-init for syn packets only, resolving issues with TCP fastopen - tcp: md5: fix incorrect tcp_header_len for incoming connections - tcp: fix F-RTO may not work correctly when receiving DSACK - tcp: ensure use of most recently sent skb when filling rate samples - tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT - virtio_net: fix wrong buf address calculation when using xdp - xsk: fix forwarding when combining copy mode with busy poll - xsk: fix possible crash when multiple sockets are created - bpf: lwt: fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook - sctp: null-check asoc strreset_chunk in sctp_generate_reconf_event - wireguard: device: check for metadata_dst with skb_valid_dst() - netfilter: update ip6_route_me_harder to consider L3 domain - gre: make o_seqno start from 0 in native mode - gre: switch o_seqno to atomic to prevent races in collect_md mode Misc: - add Eric Dumazet to networking maintainers - dt: dsa: realtek: remove realtek,rtl8367s string - netfilter: flowtable: Remove the empty file" * tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits) tcp: fix F-RTO may not work correctly when receiving DSACK Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits" net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK ixgbe: ensure IPsec VF<->PF compatibility MAINTAINERS: Update BNXT entry with firmware files netfilter: nft_socket: only do sk lookups when indev is available net: fec: add missing of_node_put() in fec_enet_init_stop_mode() bnx2x: fix napi API usage sequence tls: Skip tls_append_frag on zero copy size Add Eric Dumazet to networking maintainers netfilter: conntrack: fix udp offload timeout sysctl netfilter: nf_conntrack_tcp: re-init for syn packets only net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK net: Use this_cpu_inc() to increment net->core_stats Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted Bluetooth: hci_event: Fix creating hci_conn object on error status Bluetooth: hci_event: Fix checking for invalid handle on error status ice: fix use-after-free when deinitializing mailbox snapshot ice: wait 5 s for EMP reset after firmware flash ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg() ...
2022-04-28Merge tag 'thermal-5.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These take back recent chages that started to confuse users and fix up an attr.show callback prototype in a driver. Specifics: - Stop warning about deprecation of the userspace thermal governor and cooling device status interface, because there are cases in which user space has to drive thermal management with the help of them (Daniel Lezcano) - Fix attr.show callback prototype in the int340x thermal driver (Kees Cook)" * tag 'thermal-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/governor: Remove deprecated information Revert "thermal/core: Deprecate changing cooling device state from userspace" thermal: int340x: Fix attr.show callback prototype
2022-04-28Merge tag 'pm-5.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix up recent intel_idle driver changes and fix some ARM cpufreq driver issues. Specifics: - Fix issues with the Qualcomm's cpufreq driver (Dmitry Baryshkov, Vladimir Zapolskiy). - Fix memory leak with the Sun501 driver (Xiaobing Luo). - Make intel_idle enable C1E promotion on all CPUs when C1E is preferred to C1 (Artem Bityutskiy). - Make C6 optimization on Sapphire Rapids added recently work as expected if both C1E and C1 are "preferred" (Artem Bityutskiy)" * tag 'pm-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_idle: Fix SPR C6 optimization intel_idle: Fix the 'preferred_cstates' module parameter cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platforms cpufreq: qcom-hw: provide online/offline operations cpufreq: qcom-hw: fix the opp entries refcounting cpufreq: qcom-hw: fix the race between LMH worker and cpuhp cpufreq: qcom-hw: drop affinity hint before freeing the IRQ
2022-04-28Merge tag 'acpi-5.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael WysockiL "These fix up the ACPI processor driver after a change made during the 5.16 cycle that inadvertently broke falling back to shallower C-states when C3 cannot be used. Specifics: - Make the ACPI processor driver avoid falling back to C3 type of C-states when C3 cannot be requested (Ville Syrjälä) - Revert a quirk that is not necessary any more after fixing the underlying issue properly (Ville Syrjälä)" * tag 'acpi-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40" ACPI: processor: idle: Avoid falling back to C3 type C-states
2022-04-28Merge tag 'platform-drivers-x86-v5.18-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Highlights: - asus-wmi bug-fixes - intel-sdsu bug-fixes - build (warning) fixes - couple of hw-id additions" * tag 'platform-drivers-x86-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/intel: pmc/core: change pmc_lpm_modes to static platform/x86/intel/sdsi: Fix bug in multi packet reads platform/x86/intel/sdsi: Poll on ready bit for writes platform/x86/intel/sdsi: Handle leaky bucket platform/x86: intel-uncore-freq: Prevent driver loading in guests platform/x86: gigabyte-wmi: added support for B660 GAMING X DDR4 motherboard platform/x86: dell-laptop: Add quirk entry for Latitude 7520 platform/x86: asus-wmi: Fix driver not binding when fan curve control probe fails platform/x86: asus-wmi: Potential buffer overflow in asus_wmi_evaluate_method_buf() tools/power/x86/intel-speed-select: fix build failure when using -Wl,--as-needed
2022-04-28Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"Dany Madden
This reverts commit 723ad916134784b317b72f3f6cf0f7ba774e5dae When client requests channel or ring size larger than what the server can support the server will cap the request to the supported max. So, the client would not be able to successfully request resources that exceed the server limit. Fixes: 723ad9161347 ("ibmvnic: Add ethtool private flag for driver-defined queue limits") Signed-off-by: Dany Madden <drt@linux.ibm.com> Link: https://lore.kernel.org/r/20220427235146.23189-1-drt@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASKVladimir Oltean
The Time-Specified Departure feature is indeed mutually exclusive with TX IP checksumming in ENETC, but TX checksumming in itself is broken and was removed from this driver in commit 82728b91f124 ("enetc: Remove Tx checksumming offload code"). The blamed commit declared NETIF_F_HW_CSUM in dev->features to comply with software TSO's expectations, and still did the checksumming in software by calling skb_checksum_help(). So there isn't any restriction for the Time-Specified Departure feature. However, enetc_setup_tc_txtime() doesn't understand that, and blindly looks for NETIF_F_CSUM_MASK. Instead of checking for things which can literally never happen in the current code base, just remove the check and let the driver offload tc-etf qdiscs. Fixes: acede3c5dad5 ("net: enetc: declare NETIF_F_HW_CSUM and do it in software") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220427203017.1291634-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28ixgbe: ensure IPsec VF<->PF compatibilityLeon Romanovsky
The VF driver can forward any IPsec flags and such makes the function is not extendable and prone to backward/forward incompatibility. If new software runs on VF, it won't know that PF configured something completely different as it "knows" only XFRM_OFFLOAD_INBOUND flag. Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shannon Nelson <snelson@pensando.io> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220427173152.443102-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28Merge branch 'thermal-int340x'Rafael J. Wysocki
Merge a fix for the attr.show callback prototype in the int340x thermal driver (Kees Cook). * thermal-int340x: thermal: int340x: Fix attr.show callback prototype
2022-04-28Merge tag 'iio-fixes-for-5.18a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio Pull set of IIO fixes for 5.18 from Jonathan Cameron: "1st set of IIO fixes for the 5.18 cycle ad3552r: - Fix a bug with error codes being stored in unsigned local variable. - Fix IS_ERR when value is either NULL or not rather than ERR_PTR ad5446 - Fix shifting of read_raw value. ad5592r - Fix missing return value being set for a fwnode property read. ad7280a - Wrong variable being used to set thresholds. admv8818 - Kconfig dependency fix. ak8975 - Missing regulator disable in error path. bmi160 - Disable regulators in an error path. dac5571 - Fix chip id detection for devices with OF bindings. inv_icm42600 - Handle a case of a missing I2C NACK during initially configuration. ltc2688 - Fix voltage scaling where integer part was written twice and decimal part not at all. scd4x - Handle error before using value. sx9310 - Device property parsing against indio_dev->dev.of_node which hasn't been set yet. sx9324 - Fix hardware gain related maths. - Wrong defaults for precharge internal resistance register." * tag 'iio-fixes-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: imu: inv_icm42600: Fix I2C init possible nack iio: dac: ltc2688: fix voltage scale read iio:dac:ad3552r: Fix an IS_ERR() vs NULL check iio: sx9324: Fix default precharge internal resistance register iio: dac: ad5446: Fix read_raw not returning set value iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on() iio:proximity:sx9324: Fix hardware gain read/write iio:proximity:sx_common: Fix device property parsing on DT systems iio: adc: ad7280a: Fix wrong variable used when setting thresholds. iio:filter:admv8818: select REGMAP_SPI for ADMV8818 iio: dac: ad5592r: Fix the missing return value. iio: dac: dac5571: Fix chip id detection for OF devices iio:imu:bmi160: disable regulator in error path iio: scd4x: check return of scd4x_write_and_fetch iio: dac: ad3552r: fix signedness bug in ad3552r_reset()
2022-04-28Merge branch 'pm-cpuidle'Rafael J. Wysocki
Merge cpuidle fixes for 5.18-rc5: - Make intel_idle enable C1E promotion on all CPUs when C1E is preferred to C1 (Artem Bityutskiy). - Make C6 optimization on Sapphire Rapids added recently work as expected if both C1E and C1 are "preferred" (Artem Bityutskiy). * pm-cpuidle: intel_idle: Fix SPR C6 optimization intel_idle: Fix the 'preferred_cstates' module parameter
2022-04-27scsi: target: pscsi: Set SCF_TREAT_READ_AS_NORMAL flag only if there is ↵David Jeffery
valid data With tape devices, the SCF_TREAT_READ_AS_NORMAL flag is used by the target subsystem to mark commands which have both data to return as well as sense data. But with pscsi, SCF_TREAT_READ_AS_NORMAL can be set even if there is no data to return. The SCF_TREAT_READ_AS_NORMAL flag causes the target core to call iscsit data-in callbacks even if there is no data, which iscsit does not support. This results in iscsit going into an error state requiring recovery and being unable to complete the command to the initiator. This issue can be resolved by fixing pscsi to only set SCF_TREAT_READ_AS_NORMAL if there is valid data to return alongside the sense data. Link: https://lore.kernel.org/r/20220427183250.291881-1-djeffery@redhat.com Fixes: bd81372065fa ("scsi: target: transport should handle st FM/EOM/ILI reads") Reported-by: Scott Hamilton <scott.hamilton@atos.net> Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-27net: fec: add missing of_node_put() in fec_enet_init_stop_mode()Yang Yingliang
Put device node in error path in fec_enet_init_stop_mode(). Fixes: 8a448bf832af ("net: ethernet: fec: move GPR register offset and bit into DT") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220426125231.375688-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-27bnx2x: fix napi API usage sequenceManish Chopra
While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f34081f1 ("bnx2x: AER revised") Reported-by: David Christensen <drc@linux.vnet.ibm.com> Tested-by: David Christensen <drc@linux.vnet.ibm.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-27drm/amdgpu: keep mmhub clock gating being enabled during s2idle suspendPrike Liang
Without MMHUB clock gating being enabled then MMHUB will not disconnect from DF and will result in DF C-state entry can't be accessed during S2idle suspend, and eventually s0ix entry will be blocked. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-27drm/amd/pm: fix the deadlock issue observed on SIEvan Quan
The adev->pm.mutx is already held at the beginning of amdgpu_dpm_compute_clocks/amdgpu_dpm_enable_uvd/amdgpu_dpm_enable_vce. But on their calling path, amdgpu_display_bandwidth_update will be called and thus its sub functions amdgpu_dpm_get_sclk/mclk. They will then try to acquire the same adev->pm.mutex and deadlock will occur. By placing amdgpu_display_bandwidth_update outside of adev->pm.mutex protection(considering logically they do not need such protection) and restructuring the call flow accordingly, we can eliminate the deadlock issue. This comes with no real logics change. Fixes: 3712e7a49459 ("drm/amd/pm: unified lock protections in amdgpu_dpm.c") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Arthur Marsh <arthur.marsh@internode.on.net> Link: https://lore.kernel.org/all/9e689fea-6c69-f4b0-8dee-32c4cf7d8f9c@molgen.mpg.de/ BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1957 Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-27drm/amd/display: Fix memory leak in dcn21_clock_source_createMiaoqian Lin
When dcn20_clk_src_construct() fails, we need to release clk_src. Fixes: 6f4e6361c3ff ("drm/amd/display: Add Renoir resource (v2)") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-27drm/amdgpu: don't runtime suspend if there are displays attached (v3)Alex Deucher
We normally runtime suspend when there are displays attached if they are in the DPMS off state, however, if something wakes the GPU we send a hotplug event on resume (in case any displays were connected while the GPU was in suspend) which can cause userspace to light up the displays again soon after they were turned off. Prior to commit 087451f372bf76 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's."), the driver took a runtime pm reference when the fbdev emulation was enabled because we didn't implement proper shadowing support for vram access when the device was off so the device never runtime suspended when there was a console bound. Once that commit landed, we now utilize the core fb helper implementation which properly handles the emulation, so runtime pm now suspends in cases where it did not before. Ultimately, we need to sort out why runtime suspend in not working in this case for some users, but this should restore similar behavior to before. v2: move check into runtime_suspend v3: wake ups -> wakeups in comment, retain pm_runtime behavior in runtime_idle callback Fixes: 087451f372bf76 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Link: https://lore.kernel.org/r/20220403132322.51c90903@darkstar.example.org/ Tested-by: Michele Ballabio <ballabio.m@gmail.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-04-27drm/amdkfd: CRIU add support for GWS queuesDavid Yat Sin
Add support to checkpoint/restore GWS (Global Wave Sync) queues. Signed-off-by: David Yat Sin <david.yatsin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-27drm/amdkfd: Fix GWS queue countDavid Yat Sin
dqm->gws_queue_count and pdd->qpd.mapped_gws_queue need to be updated each time the queue gets evicted. Fixes: b8020b0304c8 ("drm/amdkfd: Enable over-subscription with >1 GWS queue") Signed-off-by: David Yat Sin <david.yatsin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-27intel_idle: Fix SPR C6 optimizationArtem Bityutskiy
The Sapphire Rapids (SPR) C6 optimization was added to the end of the 'spr_idle_state_table_update()' function. However, the function has a 'return' which may happen before the optimization has a chance to run. And this may prevent the optimization from happening. This is an unlikely scenario, but possible if user boots with, say, the 'intel_idle.preferred_cstates=6' kernel boot option. This patch fixes the issue by eliminating the problematic 'return' statement. Fixes: 3a9cf77b60dc ("intel_idle: add core C6 optimization for SPR") Suggested-by: Jan Beulich <jbeulich@suse.com> Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> [ rjw: Minor changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-27intel_idle: Fix the 'preferred_cstates' module parameterArtem Bityutskiy
Problem description. When user boots kernel up with the 'intel_idle.preferred_cstates=4' option, we enable C1E and disable C1 states on Sapphire Rapids Xeon (SPR). In order for C1E to work on SPR, we have to enable the C1E promotion bit on all CPUs. However, we enable it only on one CPU. Fix description. The 'intel_idle' driver already has the infrastructure for disabling C1E promotion on every CPU. This patch uses the same infrastructure for enabling C1E promotion on every CPU. It changes the boolean 'disable_promotion_to_c1e' variable to a tri-state 'c1e_promotion' variable. Tested on a 2-socket SPR system. I verified the following combinations: * C1E promotion enabled and disabled in BIOS. * Booted with and without the 'intel_idle.preferred_cstates=4' kernel argument. In all 4 cases C1E promotion was correctly set on all CPUs. Also tested on an old Broadwell system, just to make sure it does not cause a regression. C1E promotion was correctly disabled on that system, both C1 and C1E were exposed (as expected). Fixes: da0e58c038e6 ("intel_idle: add 'preferred_cstates' module argument") Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> [ rjw: Minor changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-28 23:15:19 +0000