summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-09-09cxgb4: changes for new firmware 1.14.4.0Hariprasad Shenai
Incorporate fw_ldst_cmd structure change for new firmware and also update version string for the same Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09net: fec: add netif status check before set mac addressNimrod Andy
There exist one issue by below case that case system hang: ifconfig eth0 down ifconfig eth0 hw ether 00:10:19:19:81:19 After eth0 down, all fec clocks are gated off. In the .fec_set_mac_address() function, it will set new MAC address to registers, which causes system hang. So it needs to add netif status check to avoid registers access when clocks are gated off. Until eth0 up the new MAC address are wrote into related registers. V2: As Lucas Stach's suggestion, add a comment in the code to explain why it needed. CC: Lucas Stach <l.stach@pengutronix.de> CC: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09r8152: fix the runtime suspend issueshayeswang
Fix the runtime suspend issues result from the linking change. Case 1: a) link down occurs. b) driver disable tx/rx. c) autosuspend occurs. d) hw linking up. e) device suspends without enabling tx/rx. f) couldn't wake up when receiving packets. Case 2: a) Nway results in linking down. b) autosuspend occurs. c) device suspends. d) device may not wake up when linking up. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09r8152: split DRIVER_VERSIONhayeswang
Split DRIVER_VERSION into NETNEXT_VERSION and NET_VERSION. Then, according to the value of DRIVER_VERSION, we could know which patches are used generally without comparing the source code. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09add microchip LAN88xx phy driverWoojung.Huh@microchip.com
Add Microchip LAN88XX phy driver for phylib. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09stmmac: fix check for phydev being openAlexey Brodkin
Current check of phydev with IS_ERR(phydev) may make not much sense because of_phy_connect() returns NULL on failure instead of error value. Still for checking result of phy_connect() IS_ERR() makes perfect sense. So let's use combined check IS_ERR_OR_NULL() that covers both cases. Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Cc: David Miller <davem@davemloft.net> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09net: qlcnic: delete redundant memsetsRasmus Villemoes
In all cases, mbx->req.arg and mbx->rsp.arg have just been allocated using kcalloc(), so these six memsets are redundant. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09net: mv643xx_eth: use kzallocRasmus Villemoes
The double memset is a little ugly; using kzalloc avoids it altogether. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09net: jme: use kzalloc() instead of kmalloc+memsetRasmus Villemoes
Using kzalloc saves a tiny bit on .text. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09net: cavium: liquidio: use kzalloc in setup_glist()Rasmus Villemoes
We save a little .text and get rid of the sizeof(...) style inconsistency. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09Merge tag 'qcom-soc-for-4.3-rc2' of ↵Kevin Hilman
git://codeaurora.org/quic/kernel/agross-msm into next/late Qualcomm ARM Based SoC Updates for 4.3-rc2 * Fix errant private access in SMEM * Fix use of correct remote processor ID in SMD transactions * Correct SMD fBLOCKREADINTR handling * tag 'qcom-soc-for-4.3-rc2' of git://codeaurora.org/quic/kernel/agross-msm: soc: qcom: smd: Correct fBLOCKREADINTR handling soc: qcom: smd: Use correct remote processor ID soc: qcom: smem: Fix errant private access devicetree: soc: Add Qualcomm SMD based RPM DT binding soc: qcom: Driver for the Qualcomm RPM over SMD soc: qcom: Add Shared Memory Driver soc: qcom: Add device tree binding for Shared Memory Device drivers: qcom: Select QCOM_SCM unconditionally for QCOM_PM soc: qcom: Add Shared Memory Manager driver
2015-09-09Merge branch 'drivers/reset' into next/lateKevin Hilman
* drivers/reset: reset: ath79: Fix missing spin_lock_init reset: Add (devm_)reset_control_get stub functions reset: reset-zynq: Adding support for Xilinx Zynq reset controller. docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings. MIPS: ath79: Add the reset controller to the AR9132 dtsi reset: Add a driver for the reset controller on the AR71XX/AR9XXX devicetree: Add bindings for the ATH79 reset controller reset: socfpga: Update reset-socfpga to read the altr,modrst-offset property doc: dt: add documentation for lpc1850-rgu reset driver reset: add driver for lpc18xx rgu reset: sti: constify of_device_id array ARM: STi: DT: Move reset controller constants into common location MAINTAINERS: add include/dt-bindings/reset path to reset controller entry
2015-09-09net: ethoc: Remove unnecessary #ifdef CONFIG_OFTobias Klauser
For !CONFIG_OF of_get_property() is defined to always return NULL. Thus there's no need to protect the call to of_get_property() with #ifdef CONFIG_OF. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09net: dsa: bcm_sf2: Fix 64-bits register writesFlorian Fainelli
The macro to write 64-bits quantities to the 32-bits register swapped the value and offsets arguments, we want to preserve the ordering of the arguments with respect to how writel() is implemented for instance: value first, offset/base second. Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09soc: qcom: smd: Correct fBLOCKREADINTR handlingBjorn Andersson
fBLOCKREADINTR is masking the notification from the remote and should hence be cleared while we're waiting the tx fifo to drain. Also change the reset state to mask the notification, as send is the only use case where we're interested in it. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-09-09soc: qcom: smd: Use correct remote processor IDAndy Gross
This patch fixes SMEM addressing issues when remote processors need to use secure SMEM partitions. Signed-off-by: Andy Gross <agross@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
2015-09-09soc: qcom: smem: Fix errant private accessAndy Gross
This patch corrects private partition item access. Instead of falling back to global for instances where we have an actual host and remote partition existing, return the results of the private lookup. Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-09-09Merge tag 'qcom-soc-for-4.3' into v4.2-rc2Andy Gross
Qualcomm ARM Based SoC Updates for 4.3 * Add SMEM driver * Add SMD driver * Add RPM over SMD driver * Select QCOM_SCM by default
2015-09-09intel_pstate: fix PCT_TO_HWP macroKristen Carlson Accardi
PCT_TO_HWP does not take the actual range of pstates exported by HWP_CAPABILITIES in account, and is broken on most platforms. Remove the macro and set the min and max pstate for hwp by determining the range and adjusting by the min and max percent limits values. Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-09intel_pstate: Fix user input of min/max to legal policy regionChen Yu
In current code, max_perf_pct might be smaller than min_perf_pct by improper user input: $ grep . /sys/devices/system/cpu/intel_pstate/m*_perf_pct /sys/devices/system/cpu/intel_pstate/max_perf_pct:100 /sys/devices/system/cpu/intel_pstate/min_perf_pct:100 $ echo 80 > /sys/devices/system/cpu/intel_pstate/max_perf_pct $ grep . /sys/devices/system/cpu/intel_pstate/m*_perf_pct /sys/devices/system/cpu/intel_pstate/max_perf_pct:80 /sys/devices/system/cpu/intel_pstate/min_perf_pct:100 Fix this problem by 2 steps: 1. Normalize the user input to [min_policy, max_policy]. 2. Make sure max_perf_pct>=min_perf_pct, suggested by Seiichi Ikarashi. Signed-off-by: Chen Yu <yu.c.chen@intel.com> Acked-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-09PM / OPP: Return suspend_opp only if it is enabledViresh Kumar
There is no point returning suspend_opp, if it is disabled by the core. As we can't use it at all. Fix it. Fixes: 4eafbd15b6c8 ("PM / OPP: add dev_pm_opp_get_suspend_opp() helper") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-09Watchdog: Fix parent of watchdog_devicesPratyush Anand
/sys/class/watchdog/watchdogn/device/modalias can help to identify the driver/module for a given watchdog node. However, many wdt devices do not set their parent and so, we do not see an entry for device in sysfs for such devices. This patch fixes parent of watchdog_device so that /sys/class/watchdog/watchdogn/device is populated. Exceptions: booke, diag288, octeon, softdog and w83627hf -- They do not have any parent. Not sure, how we can identify driver for these devices. Signed-off-by: Pratyush Anand <panand@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: at91rm9200: Correct check for syscon_node_to_regmap() errorsBjorn Andersson
syscon_node_to_regmap() returns a regmap or an ERR_PTR(). Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: at91sam9: get and use slow clockAlexandre Belloni
Commit dca1a4b5ff6e ("clk: at91: keep slow clk enabled to prevent system hang") added a workaround for the slow clock as it is not properly handled by its users. Get and use the slow clock as it is necessary for the at91sam9 watchdog. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: add a driver to support SAMA5D4 watchdog timerWenyou Yang
From SAMA5D4, the watchdog timer is upgrated with a new feature, which is describled as in the datasheet, "WDT_MR can be written until a LOCKMR command is issued in WDT_CR". That is to say, as long as the bootstrap and u-boot don't issue a LOCKMR command, WDT_MR can be written more than once in the driver. So the SAMA5D4 watchdog driver's implementation is different from the at91sam9260 watchdog driver implemented in file at91sam9_wdt.c. The user application open the device file to enable the watchdog timer hardware, and close to disable it, and set the watchdog timer timeout by seting WDV and WDD fields of WDT_MR register, and ping the watchdog by issuing WDRSTT command to WDT_CR register with hard-coded key. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: mpc8xxx: allow to compile for MPC512xUwe Kleine-König
The MPC5125 processor features a watchdog device that is identical to the MPC8610 one. So allow to enable the driver for MPC512x kernel configurations. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: mpc8xxx: use better error code when watchdog cannot be enabledUwe Kleine-König
checkpatch warns about ENOSYS, telling "ENOSYS means 'invalid syscall nr' and nothing else". So use ENODEV instead. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: mpc8xxx: use dynamic memory for device specific dataUwe Kleine-König
Instead of relying on global static memory dynamically allocate the needed data. This has the benefit of some saved bytes if the driver is not in use and making it possible to bind more than one device (even though this has no known use case). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: mpc8xxx: use devm_ioremap_resource to map memoryUwe Kleine-König
This simplifies the error paths and device unbinding. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: mpc8xxx: make use of of_device_get_match_dataUwe Kleine-König
This function is new in v4.2-rc1 and makes a forward declaration of the match table superfluous which can so be removed. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: mpc8xxx: simplify registrationUwe Kleine-König
Since commit ef90174f8210 ("watchdog: watchdog_core: Add watchdog registration deferral mechanism") there is no need to delay the call to watchdog_register_device any more. So simplify the registration code accordingly. Resetting wd_base to NULL can the also be dropped because nothing depends on it being NULL to signal probe failure any more. (The matching wd_base = NULL in .remove was missing, too.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: mpc8xxx: remove dead codeUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: lpc18xx_wdt_get_timeleft() can be staticFengguang Wu
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: NXP LPC18xx Watchdog Timer DriverAriel D'Alessandro
This commit adds support for the watchdog timer found in NXP LPC SoCs family, which includes LPC18xx/LPC43xx. Other SoCs in that family may share the same watchdog hardware. Watchdog driver registers a restart handler that will restart the system by performing an incorrect feed after ensuring the watchdog is enabled in reset mode. As watchdog cannot be disabled in hardware, driver's stop routine will regularly send a keepalive ping using a timer. Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: gpio-wdt: ping already at startup for always running devicesUwe Kleine-König
During probe for an always-running watchdog a timer is setup to constantly ping the watchdog while the device is not open. The gpio to ping the watchdog is setup to inactive. For a watchdog with hw_algo = "toggle" this results in a ping depending on the initial state of the gpio, for hw_algo = "level" no ping is generated. Make sure that the first automatic ping is sent immediately and not only when the timer expires the first time. This makes the machine survive in case more than half of the watchdog timeout is already elapsed. (Which is very probable for the chip I'm faced with that has a timeout of one second.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: gpio-wdt: be more strict about hw_algo matchingUwe Kleine-König
strncmp(algo, "toggle", 6) doesn't compare the trailing '\0' byte, so using hw_algo = "toggleboggle" is recognized the same way as hw_algo = "toggle" . While this doesn't introduce any problems for a device tree that sticks to the documented settings it's still ugly. Fix this by using strcmp to only match on "toggle" and "level". Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09xen-netback: require fewer guest Rx slots when not using GSODavid Vrabel
Commit f48da8b14d04ca87ffcffe68829afd45f926ec6a (xen-netback: fix unlimited guest Rx internal queue and carrier flapping) introduced a regression. The PV frontend in IPXE only places 4 requests on the guest Rx ring. Since netback required at least (MAX_SKB_FRAGS + 1) slots, IPXE could not receive any packets. a) If GSO is not enabled on the VIF, fewer guest Rx slots are required for the largest possible packet. Calculate the required slots based on the maximum GSO size or the MTU. This calculation of the number of required slots relies on 1650d5455bd2 (xen-netback: always fully coalesce guest Rx packets) which present in 4.0-rc1 and later. b) Reduce the Rx stall detection to checking for at least one available Rx request. This is fine since we're predominately concerned with detecting interfaces which are down and thus have zero available Rx requests. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09watchdog: booke_wdt: Use infrastructure to check timeout limitsGuenter Roeck
The watchdog infrastructure checks the maximum timeout for us. Use it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: (nv_tco) add support for MCP79Vivien Didelot
Tested on the Nvidia chipset with an SMBus controller PCI ID 0x0AA2 (as shown in the PCI listing during the boot sequence). Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: sunxi: fix activation of system resetFrancesco Lavra
Commit f2147de33470 ("watchdog: sunxi: support parameterized compatible strings") introduced a regression in sunxi_wdt_start(), by which the system reset function of the watchdog is not enabled upon starting the watchdog. As a result, the system is not reset when the watchdog expires. Fix it. Fixes: f2147de33470 ("watchdog: sunxi: support parameterized compatible strings") Signed-off-by: Francesco Lavra <francescolavra.fl@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable@vger.kernel.org
2015-09-09watchdog: mtk_wdt: add wdt shutdown callback to disable wdt if enabledGreta Zhang
Without .shutdown(), watchdog might reset the system during power off. For example, if watchdog's timeout is set to 30s, then it is reset to zero by mtk_wdt_ping(). During power off, no app will ping watchdog, but watchdog is still running and may trigger reset. Signed-off-by: Greta Zhang <greta.zhang@mediatek.com> Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: mtk_wdt: add suspend/resume supportGreta Zhang
add mediatek watchdog driver suspend/resume support Signed-off-by: Greta Zhang <greta.zhang@mediatek.com> Signed-off-by: Roger Lu <roger.lu@mediatek.com> Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: imgpdc: Unregister restart handler on removeEzequiel Garcia
Commit c631f20068 ("watchdog: imgpdc: Add reboot support") introduced a restart handler but forgot to unregister it on driver removal. Fix it. Fixes: c631f20068 ("watchdog: imgpdc: Add reboot support") Reported-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09cxgb4: Fix for write-combining stats configurationHariprasad Shenai
The write-combining configuration register SGE_STAT_CFG_A needs to be configured after FW initializes the adapter, else FW will reset the configuration Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09cxgb4: Fix tx flit calculationHariprasad Shenai
In commit 0aac3f56d4a63f04 ("cxgb4: Add comment for calculate tx flits and sge length code") introduced a regression where tx flit calculation is going wrong, which can lead to data corruption, hang, stall and write-combining failure. Fixing it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09net: eth: altera: Fix the initial device operstateAtsushi Nemoto
Call netif_carrier_off() prior to register_netdev(), otherwise userspace can see incorrect link state. Signed-off-by: Atsushi Nemoto <nemoto@toshiba-tops.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09Merge tag 'tty-4.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty driver reverts from Greg KH: "Here are some reverts for some tty patches (specifically the pl011 driver) that ended up breaking a bunch of machines (i.e. almost all of the ones with this chip). People are working on a fix for this, but in the meantime, it's best to just revert all 5 patches to restore people's serial consoles. These reverts have been in linux-next for many days now" * tag 'tty-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "uart: pl011: Rename regs with enumeration" Revert "uart: pl011: Introduce register accessor" Revert "uart: pl011: Introduce register look up table" Revert "uart: pl011: Improve LCRH register access decision" Revert "uart: pl011: Add support to ZTE ZX296702 uart"
2015-09-09Merge tag 'for-linus-20150909' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull more MTD updates from Brian Norris: "There was one significant bug in my first pull request, fixed here. I also threw in a few trivial ID additions and a small module rename. Details: - SPI NOR: bug fix for a "end of table" check that resulted in a NULL dereference in some cases - SPI NOR: a few new IDs / feature flags - OMAP2 NAND: rename module so it doesn't conflict with onenand omap2.ko" * tag 'for-linus-20150909' of git://git.infradead.org/linux-mtd: mtd: spi-nor: fix NULL dereference when no match found in spi_nor_ids[] mtd: spi-nor: s25sl064p supports both dual and quad I/O mtd: spi-nor: allow dual/quad reads on S25FL129P mtd: nand: omap2: Rename shippable module to omap2_nand mtd: spi-nor: Add support for sst25wf020a mtd: spi-nor: Add support for Micron n25q064a serial flash
2015-09-09Merge tag 'pwm/for-4.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes introduces the beginnings of a new API that's based around the concept of states that can be atomically applied. Drivers go to various lengths to implement something similar, which indicates that the core should really be providing the necessary framework. On top of that, there is a bit of cleanup as well as improved kerneldoc and integration into the device-drivers DocBook. Regarding drivers there is a new one for the NXP LPC18xx family of SoCs and a couple of fixes for existing drivers (pca9685, Broadcom Kona and Atmel HLCDC)" * tag 'pwm/for-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: ARM: at91: pwm: atmel-hlcdc: Add at91sam9n12 errata pwm: Add NXP LPC18xx PWM/SCT DT binding documentation pwm: NXP LPC18xx PWM/SCT driver pwm-pca9685: Support changing the output frequency pwm-pca9685: Fix several driver bugs pwm: kona: Modify settings application sequence pwm: pca9685: Drop owner assignment pwm: Add to device-drivers documentation pwm: Clean up kerneldoc pwm: Remove useless whitespace pwm: sysfs: Remove unnecessary padding pwm: sysfs: Properly convert from enum to string pwm: Make use of pwm_get_xxx() helpers where appropriate pwm: Add pwm_get_polarity() helper function pwm: Constify PWM device where possible pwm: Add the pwm_is_enabled() helper
2015-09-09Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "Virtio fixes and features for 4.3: - virtio-mmio can now be auto-loaded through acpi. - virtio blk supports extended partitions. - total memory is better reported when using virtio balloon with auto-deflate. - cache control is re-enabled when using virtio-blk in modern mode" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: do not change memory amount visible via /proc/meminfo virtio_ballon: change stub of release_pages_by_pfn virtio-blk: Allow extended partitions virtio_mmio: add ACPI probing virtio-blk: use VIRTIO_BLK_F_WCE and VIRTIO_BLK_F_CONFIG_WCE in virtio1
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-11 11:34:50 +0000