summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-05-15soc: mediatek: add vdec item for scpsysMars Cheng
for some chips, there is vdec item in scpsys, this patch adds it. Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-05-15soc: mediatek: avoid using fixed spm power status definesMars Cheng
Use variables to replace fixed defines since the offset of the status of spm power might be different for some chips Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Kevin-CW Chen <kevin-cw.chen@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-05-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull some more input subsystem updates from Dmitry Torokhov: "An updated xpad driver with a few more recognized device IDs, and a new psxpad-spi driver, allowing connecting Playstation 1 and 2 joypads via SPI bus" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cros_ec_keyb - remove extraneous 'const' Input: add support for PlayStation 1/2 joypads connected via SPI Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth Input: xpad - sync supported devices with xboxdrv Input: xpad - sort supported devices by USB ID
2017-05-13Merge tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI/UBIFS updates from Richard Weinberger: - new config option CONFIG_UBIFS_FS_SECURITY - minor improvements - random fixes * tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs: ubi: Add debugfs file for tracking PEB state ubifs: Fix a typo in comment of ioctl2ubifs & ubifs2ioctl ubifs: Remove unnecessary assignment ubifs: Fix cut and paste error on sb type comparisons ubi: fastmap: Fix slab corruption ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labels ubi: Make mtd parameter readable ubi: Fix section mismatch
2017-05-12Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "Incremental fixes and a small feature addition on top of the main libnvdimm 4.12 pull request: - Geert noticed that tinyconfig was bloated by BLOCK selecting DAX. The size regression is fixed by moving all dax helpers into the dax-core and only specifying "select DAX" for FS_DAX and dax-capable drivers. He also asked for clarification of the NR_DEV_DAX config option which, on closer look, does not need to be a config option at all. Mike also throws in a DEV_DAX_PMEM fixup for good measure. - Ben's attention to detail on -stable patch submissions caught a case where the recent fixes to arch_copy_from_iter_pmem() missed a condition where we strand dirty data in the cache. This is tagged for -stable and will also be included in the rework of the pmem api to a proposed {memcpy,copy_user}_flushcache() interface for 4.13. - Vishal adds a feature that missed the initial pull due to pending review feedback. It allows the kernel to clear media errors when initializing a BTT (atomic sector update driver) instance on a pmem namespace. - Ross noticed that the dax_device + dax_operations conversion broke __dax_zero_page_range(). The nvdimm unit tests fail to check this path, but xfstests immediately trips over it. No excuse for missing this before submitting the 4.12 pull request. These all pass the nvdimm unit tests and an xfstests spot check. The set has received a build success notification from the kbuild robot" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: filesystem-dax: fix broken __dax_zero_page_range() conversion libnvdimm, btt: ensure that initializing metadata clears poison libnvdimm: add an atomic vs process context flag to rw_bytes x86, pmem: Fix cache flushing for iovec write < 8 bytes device-dax: kill NR_DEV_DAX block, dax: move "select DAX" from BLOCK to FS_DAX device-dax: Tell kbuild DEV_DAX_PMEM depends on DEV_DAX
2017-05-12Merge tag 'for-v4.12-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull more power-supply updates from Sebastian Reichel: "The power-supply subsystem has a few more changes for the v4.12 merge window: - New battery driver for AXP20X and AXP22X PMICs - Improve max17042_battery for usage on x86 - Misc small cleanups & fixes" * tag 'for-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (34 commits) power: supply: cpcap-charger: Keep trickle charger bits disabled power: supply: cpcap-charger: Fix enable for 3.8V charge setting power: supply: cpcap-charger: Fix charge voltage configuration power: supply: cpcap-charger: Fix charger name power: supply: twl4030-charger: make twl4030_bci_property_is_writeable static power: supply: sbs-battery: Add alert callback mailmap: add Sebastian Reichel power: supply: avoid unused twl4030-madc.h power: supply: sbs-battery: Correct supply status with current draw power: supply: sbs-battery: Don't ignore the first external power change power: supply: pda_power: move from timer to delayed_work power: supply: max17042_battery: Add support for the SCOPE property power: supply: max17042_battery: Add support for the CHARGE_NOW property power: supply: max17042_battery: Add support for the CHARGE_FULL_DESIGN property power: supply: max17042_battery: mAh readings depend on r_sns value power: supply: max17042_battery: Add support for the VOLT_MIN property power: supply: max17042_battery: Add support for the TECHNOLOGY attribute power: supply: max17042_battery: Add external_power_changed callback power: supply: max17042_battery: Add support for the STATUS property power: supply: max17042_battery: Add default platform_data fallback data ...
2017-05-12Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Fix a problem where orderly_shutdown() is called for multiple times due to multiple critical overheating events raised in a short period by platform thermal driver. (Keerthy) - Introduce a backup thermal shutdown mechanism, which invokes kernel_power_off()/emergency_restart() directly, after orderly_shutdown() being issued for certain amount of time(specified via Kconfig). This is useful in certain conditions that userspace may be unable to power off the system in a clean manner and leaves the system in a critical state, like in the middle of driver probing phase. (Keerthy) - Introduce a new interface in thermal devfreq_cooling code so that the driver can provide more precise data regarding actual power to the thermal governor every time the power budget is calculated. (Lukasz Luba) - Introduce BCM 2835 soc thermal driver and northstar thermal driver, within a new sub-folder. (Rafał Miłecki) - Introduce DA9062/61 thermal driver. (Steve Twiss) - Remove non-DT booting on TI-SoC driver. Also add support to fetching coefficients from DT. (Keerthy) - Refactorf RCAR Gen3 thermal driver. (Niklas Söderlund) - Small fix on MTK and intel-soc-dts thermal driver. (Dawei Chien, Brian Bian) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) thermal: core: Add a back up thermal shutdown mechanism thermal: core: Allow orderly_poweroff to be called only once Thermal: Intel SoC DTS: Change interrupt request behavior trace: thermal: add another parameter 'power' to the tracing function thermal: devfreq_cooling: add new interface for direct power read thermal: devfreq_cooling: refactor code and add get_voltage function thermal: mt8173: minor mtk_thermal.c cleanups thermal: bcm2835: move to the broadcom subdirectory thermal: broadcom: ns: specify myself as MODULE_AUTHOR thermal: da9062/61: Thermal junction temperature monitoring driver Documentation: devicetree: thermal: da9062/61 TJUNC temperature binding thermal: broadcom: add Northstar thermal driver dt-bindings: thermal: add support for Broadcom's Northstar thermal thermal: bcm2835: add thermal driver for bcm2835 SoC dt-bindings: Add thermal zone to bcm2835-thermal example thermal: rcar_gen3_thermal: add suspend and resume support thermal: rcar_gen3_thermal: store device match data in private structure thermal: rcar_gen3_thermal: enable hardware interrupts for trip points thermal: rcar_gen3_thermal: record and check number of TSCs found thermal: rcar_gen3_thermal: check that TSC exists before memory allocation ...
2017-05-12Merge tag 'drm-fixes-for-v4.12-rc1' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "AMD, nouveau, one i915, and one EDID fix for v4.12-rc1 Some fixes that it would be good to have in rc1. It contains the i915 quiet fix that you reported. It also has an amdgpu fixes pull, with lots of ongoing work on Vega10 which is new in this kernel and is preliminary support so may have a fair bit of movement. Otherwise a few non-Vega10 AMD fixes, one EDID fix and some nouveau regression fixers" * tag 'drm-fixes-for-v4.12-rc1' of git://people.freedesktop.org/~airlied/linux: (144 commits) drm/i915: Make vblank evade warnings optional drm/nouveau/therm: remove ineffective workarounds for alarm bugs drm/nouveau/tmr: avoid processing completed alarms when adding a new one drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm drm/nouveau/tmr: handle races with hw when updating the next alarm time drm/nouveau/tmr: ack interrupt before processing alarms drm/nouveau/core: fix static checker warning drm/nouveau/fb/ram/gf100-: remove 0x10f200 read drm/nouveau/kms/nv50: skip core channel cursor update on position-only changes drm/nouveau/kms/nv50: fix source-rect-only plane updates drm/nouveau/kms/nv50: remove pointless argument to window atomic_check_acquire() drm/amd/powerplay: refine pwm1_enable callback functions for CI. drm/amd/powerplay: refine pwm1_enable callback functions for vi. drm/amd/powerplay: refine pwm1_enable callback functions for Vega10. drm/amdgpu: refine amdgpu pwm1_enable sysfs interface. drm/amdgpu: add amd fan ctrl mode enums. drm/amd/powerplay: add more smu message on Vega10. drm/amdgpu: fix dependency issue drm/amd: fix init order of sched job drm/amdgpu: add some additional vega10 pci ids ...
2017-05-12Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Things were a lot more calm than previously expected. It's primarily fixes in various areas, with most of the new functionality centering around TCMU backend driver work that Xiubo Li has been driving. Here's the summary on the feature side: - Make T10-PI verify configurable for emulated (FILEIO + RD) backends (Dmitry Monakhov) - Allow target-core/TCMU pass-through to use in-kernel SPC-PR logic (Bryant Ly + MNC) - Add TCMU support for growing ring buffer size (Xiubo Li + MNC) - Add TCMU support for global block data pool (Xiubo Li + MNC) and on the bug-fix side: - Fix COMPARE_AND_WRITE non GOOD status handling for READ phase failures (Gary Guo + nab) - Fix iscsi-target hang with explicitly changing per NodeACL CmdSN number depth with concurrent login driven session reinstatement. (Gary Guo + nab) - Fix ibmvscsis fabric driver ABORT task handling (Bryant Ly) - Fix target-core/FILEIO zero length handling (Bart Van Assche) Also, there was an OOPs introduced with the WRITE_VERIFY changes that I ended up reverting at the last minute, because as not unusual Bart and I could not agree on the fix in time for -rc1. Since it's specific to a conformance test, it's been reverted for now. There is a separate patch in the queue to address the underlying control CDB write overflow regression in >= v4.3 separate from the WRITE_VERIFY revert here, that will be pushed post -rc1" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (30 commits) Revert "target: Fix VERIFY and WRITE VERIFY command parsing" IB/srpt: Avoid that aborting a command triggers a kernel warning IB/srpt: Fix abort handling target/fileio: Fix zero-length READ and WRITE handling ibmvscsis: Do not send aborted task response tcmu: fix module removal due to stuck thread target: Don't force session reset if queue_depth does not change iscsi-target: Set session_fall_back_to_erl0 when forcing reinstatement target: Fix compare_and_write_callback handling for non GOOD status tcmu: Recalculate the tcmu_cmd size to save cmd area memories tcmu: Add global data block pool support tcmu: Add dynamic growing data area feature support target: fixup error message in target_tg_pt_gp_tg_pt_gp_id_store() target: fixup error message in target_tg_pt_gp_alua_access_type_store() target/user: PGR Support target: Add WRITE_VERIFY_16 Documentation/target: add an example script to configure an iSCSI target target: Use kmalloc_array() in transport_kmap_data_sg() target: Use kmalloc_array() in compare_and_write_callback() target: Improve size determinations in two functions ...
2017-05-12Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "A single ARM Juno clocksource driver fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/arm_arch_timer: Fix arch_timer_mem_find_best_frame()
2017-05-12Merge tag 'powerpc-4.12-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "The change to the Linux page table geometry was delayed for more testing with 16G pages, and there's the new CPU features stuff which just needed one more polish before going in. Plus a few changes from Scott which came in a bit late. And then various fixes, mostly minor. Summary highlights: - rework the Linux page table geometry to lower memory usage on 64-bit Book3S (IBM chips) using the Hash MMU. - support for a new device tree binding for discovering CPU features on future firmwares. - Freescale updates from Scott: "Includes a fix for a powerpc/next mm regression on 64e, a fix for a kernel hang on 64e when using a debugger inside a relocated kernel, a qman fix, and misc qe improvements." Thanks to: Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong, Nicholas Piggin, Roy Pledge, Scott Wood, Valentin Longchamp" * tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Support new device tree binding for discovering CPU features powerpc: Don't print cpu_spec->cpu_name if it's NULL of/fdt: introduce of_scan_flat_dt_subnodes and of_get_flat_dt_phandle powerpc/64s: Fix unnecessary machine check handler relocation branch powerpc/mm/book3s/64: Rework page table geometry for lower memory usage powerpc: Fix distclean with Makefile.postlink powerpc/64e: Don't place the stack beyond TASK_SIZE powerpc/powernv: Block PCI config access on BCM5718 during EEH recovery powerpc/8xx: Adding support of IRQ in MPC8xx GPIO soc/fsl/qbman: Disable IRQs for deferred QBMan work soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functions soc/fsl/qe: only apply QE_General4 workaround on affected SoCs soc/fsl/qe: round brg_freq to 1kHz granularity soc/fsl/qe: get rid of immrbar_virt_to_phys() net: ethernet: ucc_geth: fix MEM_PART_MURAM mode powerpc/64e: Fix hang when debugging programs with relocated kernel
2017-05-12Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from James Hogan: "math-emu: - Add missing clearing of BLTZALL and BGEZALL emulation counters - Fix BC1EQZ and BC1NEZ condition handling - Fix BLEZL and BGTZL identification BPF: - Add JIT support for SKF_AD_HATYPE - Use unsigned access for unsigned SKB fields - Quit clobbering callee saved registers in JIT code - Fix multiple problems in JIT skb access helpers Loongson 3: - Select MIPS_L1_CACHE_SHIFT_6 Octeon: - Remove vestiges of CONFIG_CAVIUM_OCTEON_2ND_KERNEL - Remove unused L2C types and macros. - Remove unused SLI types and macros. - Fix compile error when USB is not enabled. - Octeon: Remove unused PCIERCX types and macros. - Octeon: Clean up platform code. SNI: - Remove recursive include of cpu-feature-overrides.h Sibyte: - Export symbol periph_rev to sb1250-mac network driver. - Fix Kconfig warning. Generic platform: - Enable Root FS on NFS in generic_defconfig SMP-MT: - Use CPU interrupt controller IPI IRQ domain support UASM: - Add support for LHU for uasm. - Remove needless ISA abstraction mm: - Add 48-bit VA space and 4-level page tables for 4K pages. PCI: - Add controllers before the specified head irqchip driver for MIPS CPU: - Replace magic 0x100 with IE_SW0 - Prepare for non-legacy IRQ domains - Introduce IPI IRQ domain support MAINTAINERS: - Update email-id of Rahul Bedarkar NET: - sb1250-mac: Add missing MODULE_LICENSE() CPUFREQ: - Loongson2: drop set_cpus_allowed_ptr() Misc: - Disable Werror when W= is set - Opt into HAVE_COPY_THREAD_TLS - Enable GENERIC_CPU_AUTOPROBE - Use common outgoing-CPU-notification code - Remove dead define of ST_OFF - Remove CONFIG_ARCH_HAS_ILOG2_U{32,64} - Stengthen IPI IRQ domain sanity check - Remove confusing else statement in __do_page_fault() - Don't unnecessarily include kmalloc.h into <asm/cache.h>. - Delete unused definition of SMP_CACHE_SHIFT. - Delete redundant definition of SMP_CACHE_BYTES" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (39 commits) MIPS: Sibyte: Fix Kconfig warning. MIPS: Sibyte: Export symbol periph_rev to sb1250-mac network driver. NET: sb1250-mac: Add missing MODULE_LICENSE() MAINTAINERS: Update email-id of Rahul Bedarkar MIPS: Remove confusing else statement in __do_page_fault() MIPS: Stengthen IPI IRQ domain sanity check MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support irqchip: mips-cpu: Introduce IPI IRQ domain support irqchip: mips-cpu: Prepare for non-legacy IRQ domains irqchip: mips-cpu: Replace magic 0x100 with IE_SW0 MIPS: Remove CONFIG_ARCH_HAS_ILOG2_U{32,64} MIPS: generic: Enable Root FS on NFS in generic_defconfig MIPS: mach-rm: Remove recursive include of cpu-feature-overrides.h MIPS: Opt into HAVE_COPY_THREAD_TLS CPUFREQ: Loongson2: drop set_cpus_allowed_ptr() MIPS: uasm: Remove needless ISA abstraction MIPS: Remove dead define of ST_OFF MIPS: Use common outgoing-CPU-notification code MIPS: math-emu: Fix BC1EQZ and BC1NEZ condition handling MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters ...
2017-05-12drm/i915: Make vblank evade warnings optionalVille Syrjälä
Add a new Kconfig option to enable/disable the extra warnings from the vblank evade code. For now we'll keep the warning about an actually missed vblank always enabled as that can have an actual user visible impact. But if we miss the deadline othrwise there's no real need to bother the user with that. We'll want these warnings enabled during development however so that we can catch regressions. Based on the reports it looks like this is still very easy to hit on SKL, so we have more work ahead of us to optimize the crtiical section further. Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reported-by: Jens Axboe <axboe@kernel.dk> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: e1edbd44e23b ("drm/i915: Complain if we take too long under vblank evasion.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-05-12Merge branch 'linux-4.12' of git://github.com/skeggsb/linux into drm-nextDave Airlie
Quite a few patches, but not much code changed: - Fixes regression from atomic when only the source rect of a plane changes (ie. xrandr --right-of) - Fixes another issue where atomic changed behaviour underneath us, potentially causing laggy cursor position updates - Fixes for a bunch of races in thermal code, which lead to random lockups for a lot of users * 'linux-4.12' of git://github.com/skeggsb/linux: drm/nouveau/therm: remove ineffective workarounds for alarm bugs drm/nouveau/tmr: avoid processing completed alarms when adding a new one drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm drm/nouveau/tmr: handle races with hw when updating the next alarm time drm/nouveau/tmr: ack interrupt before processing alarms drm/nouveau/core: fix static checker warning drm/nouveau/fb/ram/gf100-: remove 0x10f200 read drm/nouveau/kms/nv50: skip core channel cursor update on position-only changes drm/nouveau/kms/nv50: fix source-rect-only plane updates drm/nouveau/kms/nv50: remove pointless argument to window atomic_check_acquire()
2017-05-12Merge branch 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Fixes for 4.12. This is a bit bigger than usual since it's 3 weeks worth of fixes and most of these changes are for vega10 which is new for 4.12 and still in a fair amount of flux. It looks like you missed my last pull request, so those patches are included here as well. Highlights: - Lots of vega10 fixes - Fix interruptable wait mixup - Fan control method fixes - Misc display fixes for radeon and amdgpu - Misc bug fixes * 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux: (132 commits) drm/amd/powerplay: refine pwm1_enable callback functions for CI. drm/amd/powerplay: refine pwm1_enable callback functions for vi. drm/amd/powerplay: refine pwm1_enable callback functions for Vega10. drm/amdgpu: refine amdgpu pwm1_enable sysfs interface. drm/amdgpu: add amd fan ctrl mode enums. drm/amd/powerplay: add more smu message on Vega10. drm/amdgpu: fix dependency issue drm/amd: fix init order of sched job drm/amdgpu: add some additional vega10 pci ids drm/amdgpu/soc15: use atomfirmware for setting bios scratch for reset drm/amdgpu/atomfirmware: add function to update engine hang status drm/radeon: only warn once in radeon_ttm_bo_destroy if va list not empty drm/amdgpu: fix mutex list null pointer reference drm/amd/powerplay: fix bug sclk/mclk level can't be set on vega10. drm/amd/powerplay: Setup sw CTF to allow graceful exit when temperature exceeds maximum. drm/amd/powerplay: delete dead code in powerplay. drm/amdgpu: Use less generic enum definitions drm/amdgpu/gfx9: derive tile pipes from golden settings drm/amdgpu/gfx: drop max_gs_waves_per_vgt drm/amd/powerplay: disable engine spread spectrum feature on Vega10. ...
2017-05-12Merge tag 'drm-misc-next-fixes-2017-05-05' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next Core Changes: - Add quirk for LGD 764 panel to default 10bpc (Mario) Cc: Mario Kleiner <mario.kleiner.de@gmail.com> * tag 'drm-misc-next-fixes-2017-05-05' of git://anongit.freedesktop.org/git/drm-misc: drm/edid: Add 10 bpc quirk for LGD 764 panel in HP zBook 17 G2
2017-05-11Input: cros_ec_keyb - remove extraneous 'const'Arnd Bergmann
gcc-7 warns about 'const SIMPLE_DEV_PM_OPS', as that macro already contains a 'const' keyword: drivers/input/keyboard/cros_ec_keyb.c:663:14: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const SIMPLE_DEV_PM_OPS(cros_ec_keyb_pm_ops, NULL, cros_ec_keyb_resume); This removes the extra one. Fixes: 6af6dc2d2aa6 ("input: Add ChromeOS EC keyboard driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-12drm/nouveau/therm: remove ineffective workarounds for alarm bugsBen Skeggs
These were ineffective due to touching the list without the alarm lock, but should no longer be required. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2017-05-12drm/nouveau/tmr: avoid processing completed alarms when adding a new oneBen Skeggs
The idea here was to avoid having to "manually" program the HW if there's a new earliest alarm. This was lazy and bad, as it leads to loads of fun races between inter-related callers (ie. therm). Turns out, it's not so difficult after all. Go figure ;) Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2017-05-12drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarmBen Skeggs
At least therm/fantog "attempts" to work around this issue, which could lead to corruption of the pending alarm list. Fix it properly by not updating the timestamp without the lock held, or trying to add an already pending alarm to the pending alarm list.... Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2017-05-12drm/nouveau/tmr: handle races with hw when updating the next alarm timeBen Skeggs
If the time to the next alarm is short enough, we could race with HW and end up with an ~4 second delay until it triggers. Fix this by checking again after we update HW. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2017-05-12drm/nouveau/tmr: ack interrupt before processing alarmsBen Skeggs
Fixes a race where we can miss an alarm that triggers while we're already processing previous alarms. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2017-05-12drm/nouveau/core: fix static checker warningBen Skeggs
object->engine cannot be NULL, it's either valid, or an error pointer. This particular condition shouldn't actually be possible, but just in case, we'll keep it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-05-12drm/nouveau/fb/ram/gf100-: remove 0x10f200 readBen Skeggs
This reg has moved on Pascal, and causes a bus fault. We never use the value anyway, so just remove the read. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-05-12drm/nouveau/kms/nv50: skip core channel cursor update on position-only changesBen Skeggs
The DRM core used to only call prepare_fb/cleanup_fb() when a plane's framebuffer changed, which achieved the desired effect. It's apparently now up to the driver to decide on its own. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org [4.11+]
2017-05-12drm/nouveau/kms/nv50: fix source-rect-only plane updatesBen Skeggs
This "optimisation" (which was originally meant to skip updating cursor settings in the core channel on position-only updates) turned out to be pointless in the final design of the code before it was merged. Remove it completely, as it breaks other cases. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org [4.10+]
2017-05-12drm/nouveau/kms/nv50: remove pointless argument to window atomic_check_acquire()Ben Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-05-11Merge tag 'fbdev-v4.12' of git://github.com/bzolnier/linuxLinus Torvalds
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "There is nothing really major here, just a couple of small bugfixes, improvements and cleanups. - fix handling of probing errors in omapfb (Arvind Yadav) - remove incorrect __exit markups in few drivers (Dmitry Torokhov) - fix boot time logo support for drivers using deferred probe (Takeshi Kihara) - fix DMA allocation size for ARM CLCD driver (Liam Beguin) - add support for specifying size via xenstore in xen-frontfb (Juergen Gross) - support for AUS mode in imxfb driver (Martin Kaiser) - fix buffer on stack usage in udlfb driver (Maksim Salau) - probe failure path fixup in sm501fb driver (Alexey Khoroshilov) - fix config dependency loop for stifb driver (Arnd Bergmann) - misc cleanups (Joe Perches, Christophe Leroy, Karim Eshapa, Pushkar Jambhlekar)" * tag 'fbdev-v4.12' of git://github.com/bzolnier/linux: fbdev: sti: don't select CONFIG_VT drivers/video/fbdev/omap/lcd_mipid.c: Use time comparison kernel macros sm501fb: don't return zero on failure path in sm501fb_start() video: fbdev: udlfb: Fix buffer on stack video: console: Remove reference to CONFIG_8xx dt-bindings: display: imx: entry for AUS mode video: fbdev: imxfb: support AUS mode drivers/video/fbdev: Fixing coding guidelines in acornfb.c xen, fbfront: add support for specifying size via xenstore video: ARM CLCD: fix dma allocation size drivers/video: Convert remaining uses of pr_warning to pr_warn video/logo: tidyup fb_logo_late_init initcall timing video: fbdev: i810: remove incorrect __exit markups video: fbdev: pmag-aa-fb: remove incorrect __exit markups video: fbdev: pmagb-b-fb: remove incorrect __exit markups video: fbdev: pmag-ba-fb: remove incorrect __exit markups omapfb: dss: Handle return errors in dss_init_ports()
2017-05-11Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A smaller collection of fixes that should go into -rc1. This contains: - A fix from Christoph, fixing a regression with the WRITE_SAME and partial completions. Caused a BUG() on ppc. - Fixup for __blk_mq_stop_hw_queues(), it should be static. From Colin. - Removal of dmesg error messages on elevator switching, when invoked from sysfs. From me. - Fix for blk-stat, using this_cpu_ptr() in a section only protected by rcu_read_lock(). This breaks when PREEMPT_RCU is enabled. From me. - Two fixes for BFQ from Paolo, one fixing a crash and one updating the documentation. - An error handling lightnvm memory leak, from Rakesh. - The previous blk-mq hot unplug lock reversal depends on the CPU hotplug rework that isn't in mainline yet. This caused a lockdep splat when people unplugged CPUs with blk-mq devices. From Wanpeng. - A regression fix for DIF/DIX on blk-mq. From Wen" * 'for-linus' of git://git.kernel.dk/linux-block: block: handle partial completions for special payload requests blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op blk-stat: don't use this_cpu_ptr() in a preemptable section elevator: remove redundant warnings on IO scheduler switch block, bfq: stress that low_latency must be off to get max throughput block, bfq: use pointer entity->sched_data only if set nvme: lightnvm: fix memory leak blk-mq: make __blk_mq_stop_hw_queues static lightnvm: remove unused rq parameter of nvme_nvm_rqtocmd() to kill warning block/mq: fix potential deadlock during cpu hotplug
2017-05-11Merge tag 'for-linus-20170510' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "NAND, from Boris: - some minor fixes/improvements on existing drivers (fsmc, gpio, ifc, davinci, brcmnand, omap) - a huge cleanup/rework of the denali driver accompanied with core fixes/improvements to simplify the driver code - a complete rewrite of the atmel driver to support new DT bindings make future evolution easier - the addition of per-vendor detection/initialization steps to avoid extending the nand_ids table with more extended-id entries SPI NOR, from Cyrille: - fixes in the hisi, intel and Mediatek SPI controller drivers - fixes to some SPI flash memories not supporting the Chip Erase command. - add support to some new memory parts (Winbond, Macronix, Micron, ESMT). - add new driver for the STM32 QSPI controller And a few fixes for Gemini and Versatile platforms on physmap-of" * tag 'for-linus-20170510' of git://git.infradead.org/linux-mtd: (100 commits) MAINTAINERS: Update NAND subsystem git repositories mtd: nand: gpio: update binding mtd: nand: add ooblayout for old hamming layout mtd: oxnas_nand: Allocating more than necessary in probe() dt-bindings: mtd: Document the STM32 QSPI bindings mtd: mtk-nor: set controller's address width according to nor flash mtd: spi-nor: add driver for STM32 quad spi flash controller mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program mtd: nand: davinci: add comment on NAND subpage write status on keystone mtd: nand: omap2: Fix partition creation via cmdline mtdparts mtd: nand: NULL terminate a of_device_id table mtd: nand: Fix a couple error codes mtd: nand: allow drivers to request minimum alignment for passed buffer mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset mtd: nand: denali: allow to override revision number mtd: nand: denali_dt: use pdev instead of ofdev for platform_device mtd: nand: denali_dt: remove dma-mask DT property mtd: nand: denali: support 64bit capable DMA engine mtd: nand: denali_dt: enable HW_ECC_FIXUP for Altera SOCFPGA variant mtd: nand: denali: support HW_ECC_FIXUP capability ...
2017-05-11Revert "target: Fix VERIFY and WRITE VERIFY command parsing"Nicholas Bellinger
This reverts commit 0e2eb7d12eaa8e391bf5615d4271bb87a649caaa Author: Bart Van Assche <bart.vanassche@sandisk.com> Date: Thu Mar 30 10:12:39 2017 -0700 target: Fix VERIFY and WRITE VERIFY command parsing This patch broke existing behaviour for WRITE_VERIFY because it dropped the original SCF_SCSI_DATA_CDB assignment for bytchk = 0 so target_cmd_size_check() no longer rejected this case, allowing an overflow case to trigger an OOPs in iscsi-target. Since the short term and long term fixes are still being discussed, revert it for now since it's late in the merge window and try again in v4.13-rc1. Conflicts: drivers/target/target_core_sbc.c Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-10libnvdimm, btt: ensure that initializing metadata clears poisonVishal Verma
If we had badblocks/poison in the metadata area of a BTT, recreating the BTT would not clear the poison in all cases, notably the flog area. This is because rw_bytes will only clear errors if the request being sent down is 512B aligned and sized. Make sure that when writing the map and info blocks, the rw_bytes being sent are of the correct size/alignment. For the flog, instead of doing the smaller log_entry writes only, first do a 'wipe' of the entire area by writing zeroes in large enough chunks so that errors get cleared. Cc: Andy Rudoff <andy.rudoff@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-05-10libnvdimm: add an atomic vs process context flag to rw_bytesVishal Verma
nsio_rw_bytes can clear media errors, but this cannot be done while we are in an atomic context due to locking within ACPI. From the BTT, ->rw_bytes may be called either from atomic or process context depending on whether the calls happen during initialization or during IO. During init, we want to ensure error clearing happens, and the flag marking process context allows nsio_rw_bytes to do that. When called during IO, we're in atomic context, and error clearing can be skipped. Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-05-10Merge tag 'rtc-4.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "RTC subsystem update: - Add OF device ID table for i2c drivers New RTC driver: - Motorola CPCAP PMIC RTC RTC driver updates: - cmos: fix IRQ selection - ds1307: Add ST m41t0 support - ds1374: fix watchdog configuration - sh: Add rza series support" * tag 'rtc-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits) rtc: gemini: add return value validation rtc: snvs: fix an incorrect check of return value rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks rtc: sh: mark PM functions as unused rtc: hid-sensor-time: remove some dead code rtc: m41t80: Add proper compatible for rv4162 rtc: ds1307: Add m41t0 to OF device ID table rtc: ds1307: support m41t0 variant rtc: cpcap: fix improper use of IRQ_NONE for request_threaded_irq rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs x86: i8259: export legacy_pic symbol dt-bindings: rtc: document the rtc-sh bindings rtc: sh: add support for rza series rtc: cpcap: kfreeing devm allocated memory rtc: wm8350: Remove unused to_wm8350_from_rtc_dev rtc: cpcap: new rtc driver dt-bindings: Add vendor prefix for Motorola rtc: omap: mark PM methods as __maybe_unused rtc: omap: remove incorrect __exit markups ...
2017-05-10Merge tag 'hwparam-20170420' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull hw lockdown support from David Howells: "Annotation of module parameters that configure hardware resources including ioports, iomem addresses, irq lines and dma channels. This allows a future patch to prohibit the use of such module parameters to prevent that hardware from being abused to gain access to the running kernel image as part of locking the kernel down under UEFI secure boot conditions. Annotations are made by changing: module_param(n, t, p) module_param_named(n, v, t, p) module_param_array(n, t, m, p) to: module_param_hw(n, t, hwtype, p) module_param_hw_named(n, v, t, hwtype, p) module_param_hw_array(n, t, hwtype, m, p) where the module parameter refers to a hardware setting hwtype specifies the type of the resource being configured. This can be one of: ioport Module parameter configures an I/O port iomem Module parameter configures an I/O mem address ioport_or_iomem Module parameter could be either (runtime set) irq Module parameter configures an I/O port dma Module parameter configures a DMA channel dma_addr Module parameter configures a DMA buffer address other Module parameter configures some other value Note that the hwtype is compile checked, but not currently stored (the lockdown code probably won't require it). It is, however, there for future use. A bonus is that the hwtype can also be used for grepping. The intention is for the kernel to ignore or reject attempts to set annotated module parameters if lockdown is enabled. This applies to options passed on the boot command line, passed to insmod/modprobe or direct twiddling in /sys/module/ parameter files. The module initialisation then needs to handle the parameter not being set, by (1) giving an error, (2) probing for a value or (3) using a reasonable default. What I can't do is just reject a module out of hand because it may take a hardware setting in the module parameters. Some important modules, some ipmi stuff for instance, both probe for hardware and allow hardware to be manually specified; if the driver is aborts with any error, you don't get any ipmi hardware. Further, trying to do this entirely in the module initialisation code doesn't protect against sysfs twiddling. [!] Note that in and of itself, this series of patches should have no effect on the the size of the kernel or code execution - that is left to a patch in the next series to effect. It does mark annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in an already existing field" * tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits) Annotate hardware config module parameters in sound/pci/ Annotate hardware config module parameters in sound/oss/ Annotate hardware config module parameters in sound/isa/ Annotate hardware config module parameters in sound/drivers/ Annotate hardware config module parameters in fs/pstore/ Annotate hardware config module parameters in drivers/watchdog/ Annotate hardware config module parameters in drivers/video/ Annotate hardware config module parameters in drivers/tty/ Annotate hardware config module parameters in drivers/staging/vme/ Annotate hardware config module parameters in drivers/staging/speakup/ Annotate hardware config module parameters in drivers/staging/media/ Annotate hardware config module parameters in drivers/scsi/ Annotate hardware config module parameters in drivers/pcmcia/ Annotate hardware config module parameters in drivers/pci/hotplug/ Annotate hardware config module parameters in drivers/parport/ Annotate hardware config module parameters in drivers/net/wireless/ Annotate hardware config module parameters in drivers/net/wan/ Annotate hardware config module parameters in drivers/net/irda/ Annotate hardware config module parameters in drivers/net/hamradio/ Annotate hardware config module parameters in drivers/net/ethernet/ ...
2017-05-10Input: add support for PlayStation 1/2 joypads connected via SPITomohiro Yoshidomi
PlayStation 1/2 joypads can be connected directly to the SPI interface. Signed-off-by: Tomohiro Yoshidomi <sylph23k@gmail.com> Acked-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-10Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Sort of on the quieter side this time, which is probably due more to me not catching up as quickly on patch review than anything else. Overall it seems normal though, a few small changes to the core, mostly small non-critical fixes here and there as well as driver updates for new and existing hardware support. The biggest things are the TI clk driver rework to lay the groundwork for clkctrl support in the next merge window and the AmLogic audio/graphics clk support. Core: - clk_possible_parents debugfs file so we know which parents a clk could possibly have - Fix to make clk rate change notifiers stop on the first failure instead of continuing New Drivers: - Mediatek MT6797 SoCs - hi655x PMIC clks - AmLogic Meson SoC i2s and spdif audio clks and Mali graphics clks - Allwinner H5 SoCs and PRCM hardware Updates: - Nvidia Tegra T210 cleanups and non-critical fixes - TI OMAP cleanups in preparation for clkctrl support - trivial fixes like kcalloc(), devm_* conversions, and seq_puts() - ZTE zx296718 SoC VGA clks - Rockchip clk-ids, fixups, and rename of rk1108 to rv1108 - IDT VersaClock 5P49V5935 support - Renesas R-Car H3 and M3-W IMR clks and ES2.0 rev of R-Car H3 support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (151 commits) clk: x86: pmc-atom: Checking for IS_ERR() instead of NULL clk: ti: divider: try to fix ti_clk_register_divider clk: mvebu: Use kcalloc() in two functions clk: mvebu: Use kcalloc() in of_cpu_clk_setup() clk: nomadik: Delete error messages for a failed memory allocation in two functions clk: nomadik: Use seq_puts() in nomadik_src_clk_show() clk: Improve a size determination in two functions clk: Replace four seq_printf() calls by seq_putc() clk: si5351: Delete an error message for a failed memory allocation in si5351_i2c_probe() clk: si5351: Use devm_kcalloc() in si5351_i2c_probe() clk: at91: Use kcalloc() in of_at91_clk_pll_get_characteristics() reset: mediatek: Add MT2701 ethsys reset controller include file clk: mediatek: add mt2701 ethernet reset clk: hi6220: Add the hi655x's pmic clock clk: ti: fix building without legacy omap3 clk: ti: fix linker error with !SOC_OMAP4 clk: hi3620: Fix a typo in one variable name clk: hi3620: Delete error messages for a failed memory allocation in two functions clk: hi3620: Use kcalloc() in hi3620_mmc_clk_init() clk: hisilicon: Delete error messages for failed memory allocations in hisi_clk_init() ...
2017-05-10Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "Fixes, cleanups, performance A bunch of changes to virtio, most affecting virtio net. Also ptr_ring batched zeroing - first of batching enhancements that seems ready." * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: s390/virtio: change maintainership tools/virtio: fix spelling mistake: "wakeus" -> "wakeups" virtio_net: tidy a couple debug statements ptr_ring: support testing different batching sizes ringtest: support test specific parameters ptr_ring: batch ring zeroing virtio: virtio_driver doc virtio_net: don't reset twice on XDP on/off virtio_net: fix support for small rings virtio_net: reduce alignment for buffers virtio_net: rework mergeable buffer handling virtio_net: allow specifying context for rx virtio: allow extra context per descriptor tools/virtio: fix build breakage virtio: add context flag to find vqs virtio: wrap find_vqs ringtest: fix an assert statement
2017-05-10Merge tag 'armsoc-tee' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull TEE driver infrastructure and OP-TEE drivers from Arnd Bergmann: "This introduces a generic TEE framework in the kernel, to handle trusted environemtns (security coprocessor or software implementations such as OP-TEE/TrustZone). I'm sending it separately from the other arm-soc driver changes to give it a little more visibility, once the subsystem is merged, we will likely keep this in the arm₋soc drivers branch or have the maintainers submit pull requests directly, depending on the patch volume. I have reviewed earlier versions in the past, and have reviewed the latest version in person during Linaro Connect BUD17. Here is my overall assessment of the subsystem: - There is clearly demand for this, both for the generic infrastructure and the specific OP-TEE implementation. - The code has gone through a large number of reviews, and the review comments have all been addressed, but the reviews were not coming up with serious issues any more and nobody volunteered to vouch for the quality. - The user space ioctl interface is sufficient to work with the OP-TEE driver, and it should in principle work with other TEE implementations that follow the GlobalPlatform[1] standards, but it might need to be extended in minor ways depending on specific requirements of future TEE implementations - The main downside of the API to me is how the user space is tied to the TEE implementation in hardware or firmware, but uses a generic way to communicate with it. This seems to be an inherent problem with what it is trying to do, and I could not come up with any better solution than what is implemented here. For a detailed history of the patch series, see https://lkml.org/lkml/2017/3/10/1277" * tag 'armsoc-tee' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dt: hikey: Add optee node Documentation: tee subsystem and op-tee driver tee: add OP-TEE driver tee: generic TEE subsystem dt/bindings: add bindings for optee
2017-05-10drm/amd/powerplay: refine pwm1_enable callback functions for CI.Rex Zhu
Use the new enums for setting and getting the fan control mode. Fixes problems due to previous inconsistencies between enums. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-10drm/amd/powerplay: refine pwm1_enable callback functions for vi.Rex Zhu
Use the new enums for setting and getting the fan control mode. Fixes problems due to previous inconsistencies between enums. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-10drm/amd/powerplay: refine pwm1_enable callback functions for Vega10.Rex Zhu
Use the new enums for setting and getting the fan control mode. Fixes problems due to previous inconsistencies between enums. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-10drm/amdgpu: refine amdgpu pwm1_enable sysfs interface.Rex Zhu
Make the interface consistent. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-10drm/amdgpu: add amd fan ctrl mode enums.Rex Zhu
Add common fan enums that can be used for both powerplay and dpm. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-10drm/amd/powerplay: add more smu message on Vega10.Rex Zhu
Add some new SMU messages. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-10Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main changes are: - Debloat RCU headers - Parallelize SRCU callback handling (plus overlapping patches) - Improve the performance of Tree SRCU on a CPU-hotplug stress test - Documentation updates - Miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits) rcu: Open-code the rcu_cblist_n_lazy_cbs() function rcu: Open-code the rcu_cblist_n_cbs() function rcu: Open-code the rcu_cblist_empty() function rcu: Separately compile large rcu_segcblist functions srcu: Debloat the <linux/rcu_segcblist.h> header srcu: Adjust default auto-expediting holdoff srcu: Specify auto-expedite holdoff time srcu: Expedite first synchronize_srcu() when idle srcu: Expedited grace periods with reduced memory contention srcu: Make rcutorture writer stalls print SRCU GP state srcu: Exact tracking of srcu_data structures containing callbacks srcu: Make SRCU be built by default srcu: Fix Kconfig botch when SRCU not selected rcu: Make non-preemptive schedule be Tasks RCU quiescent state srcu: Expedite srcu_schedule_cbs_snp() callback invocation srcu: Parallelize callback handling kvm: Move srcu_struct fields to end of struct kvm rcu: Fix typo in PER_RCU_NODE_PERIOD header comment rcu: Use true/false in assignment to bool rcu: Use bool value directly ...
2017-05-10drm/amdgpu: fix dependency issueChunming Zhou
The problem is that executing the jobs in the right order doesn't give you the right result because consecutive jobs executed on the same engine are pipelined. In other words job B does it buffer read before job A has written it's result. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-10drm/amd: fix init order of sched jobChunming Zhou
Need to increment after the fence check. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-10Merge tag 'acpi-extra-4.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20170303 which adds a few minor fixes and improvements, update ACPI SoC drivers with new device IDs, platform-related information and similar, fix the register information in the xpower PMIC driver, introduce a concept of "always present" devices to the ACPI device enumeration code and use it to fix a problem with one platform, and fix a system resume issue related to power resources. Specifics: - Update the ACPICA code in the kernel to upstream revision 20170303 which includes: * Minor fixes and improvements in the core code (Bob Moore, Seunghun Han). * Debugger fixes (Colin Ian King, Lv Zheng). * Compiler/disassembler improvements (Bob Moore, David Box, Lv Zheng). * Build-related update (Lv Zheng). - Add new device IDs and platform-related information to the ACPI drivers for Intel (LPSS) and AMD (APD) SoCs (Hanjun Guo, Hans de Goede). - Make it possible to quirk ACPI-enumerated devices as "always present" on platforms where they are incorrectly reported as not present by the AML and add the INT0002 device ID to the list of "always present" devices (Hans de Goede). - Fix the register information in the xpower PMIC driver and add comments to map the registers to symbols used by AML to it (Hans de Goede). - Move the code turning off unused ACPI power resources during system resume to a point after all devices have been resumed to avoid issues with power resources that do not behave as expected (Hans de Goede)" * tag 'acpi-extra-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits) ACPI / power: Delay turning off unused power resources after suspend ACPI / PMIC: xpower: Fix power_table addresses ACPI / LPSS: Call pwm_add_table() for Bay Trail PWM device ACPICA: Update version to 20170303 ACPICA: iasl: add ASL conversion tool ACPICA: Local cache support: Allow small cache objects ACPICA: Disassembler: Do not unconditionally remove temporary names ACPICA: iasl: Fix IORT SMMU GSI disassembling ACPICA: Cleanup AML opcode definitions, no functional change ACPICA: Debugger: Add interpreter blocking mark for single-step mode ACPICA: debugger: fix memory leak on Pathname ACPICA: Update for automatic repair code for objects returned by evaluate_object ACPICA: Namespace: fix operand cache leak ACPICA: Fix several incorrect invocations of ACPICA return macro ACPICA: Fix a module for excessive debug output ACPICA: Update some function headers, no funtional change ACPICA: Disassembler: Enhance resource descriptor detection i2c: designware: Add ACPI HID for Hisilicon Hip07/08 I2C controller ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller ACPI / bus: Add INT0002 to list of always-present devices ...
2017-05-10Merge tag 'pm-extra-4.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These add new CPU IDs to a couple of drivers, fix a possible NULL pointer dereference in the cpuidle core, update DT-related things in the generic power domains framework and finally update the suspend/resume infrastructure to improve the handling of wakeups from suspend-to-idle. Specifics: - Add Intel Gemini Lake CPU IDs to the intel_idle and intel_rapl drivers (David Box). - Add a NULL pointer check to the cpuidle core to prevent it from crashing on platforms with incomplete cpuidle configuration (Fei Li). - Fix DT-related documentation in the generic power domains (genpd) framework and add a MAINTAINERS entry for DT-related material in genpd (Viresh Kumar). - Update the system suspend/resume infrastructure to improve the handling of aborts of suspend transitions in progress in the wakeup framework and rework the suspend-to-idle core loop to make it possible to filter out spurious wakeup events (specifically the ones coming from ACPI) without resuming all the way up to user space every time (Rafael Wysocki)" * tag 'pm-extra-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle PM / wakeup: Integrate mechanism to abort transitions in progress x86/intel_idle: add Gemini Lake support cpuidle: check dev before usage in cpuidle_use_deepest_state() powercap: intel_rapl: Add support for Gemini Lake PM / Domains: Add DT file to MAINTAINERS PM / Domains: Fix DT example