summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-10-22uio: Cleanup irq handling.Eric W. Biederman
Change the value of UIO_IRQ_NONE -2 to 0. 0 is well defined in the rest of the kernel as the value to indicate an irq has not been assigned. Update the calls to request_irq and free_irq to only ignore UIO_IRQ_NONE and UIO_IRQ_CUSTOM allowing the rest of the kernel's possible irq numbers to be used. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22uio: Don't clear driver dataEric W. Biederman
Currently uio sets it's driver data to NULL just as it is unregistering attributes. sysfs maks the guaranatee that it will not call attributes after device_destroy is called so this is unncessary and leads to lots of unnecessary code in uio.c Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22uio: Fix lack of locking in init_uio_classEric W. Biederman
There is no locking in init_uio_class so multiple drivers can race and create multiple uio classes. Fix this by simplifying the code. In particular always register the uio class during module_init and make things simpler. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22SYSFS: Allow boot time switching between deprecated and modern sysfs layoutAndi Kleen
I have some systems which need legacy sysfs due to old tools that are making assumptions that a directory can never be a symlink to another directory, and it's a big hazzle to compile separate kernels for them. This patch turns CONFIG_SYSFS_DEPRECATED into a run time option that can be switched on/off the kernel command line. This way the same binary can be used in both cases with just a option on the command line. The old CONFIG_SYSFS_DEPRECATED_V2 option is still there to set the default. I kept the weird name to not break existing config files. Also the compat code can be still completely disabled by undefining CONFIG_SYSFS_DEPRECATED_SWITCH -- just the optimizer takes care of this now instead of lots of ifdefs. This makes the code look nicer. v2: This is an updated version on top of Kay's patch to only handle the block devices. I tested it on my old systems and that seems to work. Cc: axboe@kernel.dk Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devicesKay Sievers
This patch removes the old CONFIG_SYSFS_DEPRECATED_V2 config option, but it keeps the logic around to handle block devices in the old manner as some people like to run new kernel versions on old (pre 2007/2008) distros. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: "James E.J. Bottomley" <James.Bottomley@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22base/platform: Simplifications for NULL platform data/resources handlingAnton Vorontsov
There's no need to explicitly check for data and resources being NULL, as platform_device_add_{data,resources}() do this internally nowadays. This makes the code more linear and less indented. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22base/platform: Safe handling for NULL platform data and resourcesAnton Vorontsov
Some users of platform_device_add_{data,resources}() assume that NULL data and resources will be handled specially, i.e. just ignored. But the platform core ends up calling kmemdup(NULL, 0, ...), which returns a non-NULL result (i.e. ZERO_SIZE_PTR), which causes drivers to oops on a valid code, something like: if (platform_data) stuff = platform_data->stuff; This patch makes the platform core a bit more safe for such cases. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22pch_phub: fix build warningsGreg Kroah-Hartman
This patch fixes up all of the build warnings for the pch_phub driver. Cc: Masayuki Ohtake <masa-korg@dsn.okisemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22add Packet hub driver for Topcliff Platform controller hubMasayuki Ohtak
Packet hub driver of Topcliff PCH Topcliff PCH is the platform controller hub that is going to be used in Intel's upcoming general embedded platform. All IO peripherals in Topcliff PCH are actually devices sitting on AMBA bus. Packet hub is a special converter device in Topcliff PCH that translate AMBA transactions to PCI Express transactions and vice versa. Thus packet hub helps present all IO peripherals in Topcliff PCH as PCIE devices to IA system. Topcliff PCH has MAC address and Option ROM data. These data are in SROM which is connected to PCIE bus. Packet hub driver of Topcliff PCH can access MAC address and Option ROM data in SROM via sysfs interface. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22driver core: platform_bus: allow runtime override of dev_pm_opsKevin Hilman
Currently, the platform_bus allows customization of several of the busses dev_pm_ops methods by using weak symbols so that platform code can override them. The weak-symbol approach is not scalable when wanting to support multiple platforms in a single kernel binary. Instead, provide __init methods for platform code to customize the dev_pm_ops methods at runtime. NOTE: after these dynamic methods are merged, the weak symbols should be removed from drivers/base/platform.c. AFAIK, this will only affect SH and sh-mobile which should be converted to use this runtime approach instead of the weak symbols. After SH & sh-mobile are converted, the weak symobols could be removed. Tested on OMAP3. Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22uio: do not use PCI resources before pci_enable_device()Kulikov Vasiliy
IRQ and resource[] may not have correct values until after PCI hotplug setup occurs at pci_enable_device() time. The semantic match that finds this problem is as follows: // <smpl> @@ identifier x; identifier request ~= "pci_request.*|pci_resource.*"; @@ ( * x->irq | * x->resource | * request(x, ...) ) ... *pci_enable_device(x) // </smpl> Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22driver core: platform: Use drv->driver.bus instead of assuming platform_bus_typePatrick Pannuto
In theory (although not *yet* in practice), a driver being passed to platform_driver_probe might have driver.bus set to something other than platform_bus_type. Locking drv->driver.bus is always correct. Signed-off-by: Patrick Pannuto <ppannuto@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-20Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: MIPS: O32 compat/N32: Fix to use compat syscall wrappers for AIO syscalls. MAINTAINERS: Change list for ioc_serial to linux-serial. SERIAL: ioc3_serial: Return -ENOMEM on memory allocation failure MIPS: jz4740: Fix Kbuild Platform file. MIPS: Repair Kbuild make clean breakage.
2010-10-20virtio: console: Don't block entire guest if host doesn't read dataAmit Shah
If the host is slow in reading data or doesn't read data at all, blocking write calls not only blocked the program that called write() but the entire guest itself. To overcome this, let's not block till the host signals it has given back the virtio ring element we passed it. Instead, send the buffer to the host and return to userspace. This operation then becomes similar to how non-blocking writes work, so let's use the existing code for this path as well. This code change also ensures blocking write calls do get blocked if there's not enough room in the virtio ring as well as they don't return -EAGAIN to userspace. Signed-off-by: Amit Shah <amit.shah@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> CC: stable@kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] bsg: fix incorrect device_status value [SCSI] Fix VPD inquiry page wrapper
2010-10-19SERIAL: ioc3_serial: Return -ENOMEM on memory allocation failureJulia Lawall
In this code, 0 is returned on memory allocation failure, even though other failures return -ENOMEM or other similar values. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression ret; expression x,e1,e2,e3; @@ ret = 0 ... when != ret = e1 *x = \(kmalloc\|kcalloc\|kzalloc\)(...) ... when != ret = e2 if (x == NULL) { ... when != ret = e3 return ret; } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> To: Pat Gefre <pfg@sgi.com> Cc: kernel-janitors@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1704/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-19Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: avivo cursor workaround applies to evergreen as well
2010-10-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: evdev - fix EVIOCSABS regression Input: evdev - fix Ooops in EVIOCGABS/EVIOCSABS
2010-10-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: fix TI TSB82AA2 regression since 2.6.35
2010-10-18mxc_nand: do not depend on disabling the irq in the interrupt handlerSascha Hauer
This patch reverts the driver to enabling/disabling the NFC interrupt mask rather than enabling/disabling the system interrupt. This cleans up the driver so that it doesn't rely on interrupts being disabled within the interrupt handler. For i.MX21 we keep the current behaviour, that is calling enable_irq/disable_irq_nosync to enable/disable interrupts. This patch is based on earlier work by John Ogness. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: John Ogness <john.ogness@linutronix.de> Tested-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-18Merge branch 'for-linus/i2c/2636-rc8' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/i2c/2636-rc8' of git://git.fluff.org/bjdooks/linux: i2c-imx: do not allow interruptions when waiting for I2C to complete i2c-davinci: Fix TX setup for more SoCs
2010-10-18Input: evdev - fix EVIOCSABS regressionDaniel Mack
448cd16 ("Input: evdev - rearrange ioctl handling") broke EVIOCSABS by checking for the wrong direction bit. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Tested-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18Input: evdev - fix Ooops in EVIOCGABS/EVIOCSABSDaniel Mack
This fixes a regression introduced by the dynamic allocation of absinfo for input devices. We need to bail out early for input devices which don't have absolute axis. [ 929.664303] Pid: 2989, comm: input Not tainted 2.6.36-rc8+ #14 MS-7260/MS-7260 [ 929.664318] EIP: 0060:[<c12bdc01>] EFLAGS: 00010246 CPU: 0 [ 929.664331] EIP is at evdev_ioctl+0x4f8/0x59f [ 929.664341] EAX: 00000040 EBX: 00000000 ECX: 00000006 EDX: f45a1efc [ 929.664355] ESI: 00000000 EDI: f45a1efc EBP: f45a1f24 ESP: f45a1eb8 [ 929.664369] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 929.664402] f470da74 f6a30e78 f462c240 00000018 bfe4a260 00000000 f45b06fc 00000000 [ 929.664429] <0> 000000c4 b769d000 c3544620 f470da74 f45b06fc f45b06fc f45a1f38 c107dd1f [ 929.664458] <0> f4710b74 000000c4 00000000 00000000 00000000 0000029d 00000a74 f4710b74 [ 929.664500] [<c107dd1f>] ? handle_mm_fault+0x2be/0x59a [ 929.664513] [<c12bd709>] ? evdev_ioctl+0x0/0x59f [ 929.664524] [<c1099d30>] ? do_vfs_ioctl+0x494/0x4d9 [ 929.664538] [<c10432a1>] ? up_read+0x16/0x29 [ 929.664550] [<c101c818>] ? do_page_fault+0x2ff/0x32d [ 929.664564] [<c108d048>] ? do_sys_open+0xc5/0xcf [ 929.664575] [<c1099db6>] ? sys_ioctl+0x41/0x61 [ 929.664587] [<c1002710>] ? sysenter_do_call+0x12/0x36 [ 929.684570] ---[ end trace 11b83e923bd8f2bb ]--- Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18i2c-imx: do not allow interruptions when waiting for I2C to completeMarc Kleine-Budde
The i2c_imx_trx_complete() function is using wait_event_interruptible_timeout() to wait for the I2C controller to signal that it has completed an I2C bus operation. If the process that causes the I2C operation receives a signal, the wait will be interrupted, returning an error. It is better to let the I2C operation finished before handling the signal (i.e. returning into userspace). It is safe to use wait_event_timeout() instead, because the timeout will allow the process to exit if the I2C bus hangs. It's also better to allow the I2C operation to finish, because unacknowledged I2C operations can cause the I2C bus to hang. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-10-18i2c-davinci: Fix TX setup for more SoCsJon Povey
This patch is an improvement to 4bba0fd8d1c6d405df666e2573e1a1f917098be0 which got to mainline a little early. Sudhakar Rajashekhara explains that at least OMAP-L138 requires MDR mode settings before DXR for correct behaviour, so load MDR first with STT cleared and later load again with STT set. Tested on DM355 connected to Techwell TW2836 and Wolfson WM8985 Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Acked-by: Troy Kisky <troy.kisky@boundarydevices.com> Tested-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-10-18drm/radeon/kms: avivo cursor workaround applies to evergreen as wellAlex Deucher
Fixes cursor corruption in certain cases. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-17firewire: ohci: fix TI TSB82AA2 regression since 2.6.35Stefan Richter
Revert commit 54672386ccf36ffa21d1de8e75624af83f9b0eeb "firewire: ohci: fix up configuration of TI chips". It caused massive slow-down and data corruption with a TSB82AA2 based StarTech EC1394B2 ExpressCard and FireWire 800 harddisks. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/657081 http://thread.gmane.org/gmane.linux.kernel.firewire.user/4013 The fact that some card EEPROMs do not program these enhancements may be related to TSB81BA3 phy chip errata, if not to bugs of TSB82AA2 itself. We could re-add these configuration steps, but only conditional on a whitelist of cards on which these enhancements bring a proven positive effect. Reported-and-tested-by: Eric Shattow <lucent@gmail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> 2.6.35 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-10-15v4l1: fix 32-bit compat microcode loading translationLinus Torvalds
The compat code for the VIDIOCSMICROCODE ioctl is totally buggered. It's only used by the VIDEO_STRADIS driver, and that one is scheduled to staging and eventually removed unless somebody steps up to maintain it (at which point it should use request_firmware() rather than some magic ioctl). So we'll get rid of it eventually. But in the meantime, the compatibility ioctl code is broken, and this tries to get it to at least limp along (even if Mauro suggested just deleting it entirely, which may be the right thing to do - I don't think the compatibility translation code has ever worked unless you were very lucky). Reported-by: Kees Cook <kees.cook@canonical.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: sdio: fix SDIO suspend/resume regression
2010-10-15mmc: sdio: fix SDIO suspend/resume regressionOhad Ben-Cohen
Fix SDIO suspend/resume regression introduced by 4c2ef25fe0b "mmc: fix all hangs related to mmc/sd card insert/removal during suspend/resume": PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) pm_op(): platform_pm_suspend+0x0/0x5c returns -38 PM: Device pxa2xx-mci.0 failed to suspend: error -38 PM: Some devices failed to suspend 4c2ef25fe0b moved the card removal/insertion mechanism out of MMC's suspend/resume path and into pm notifiers (mmc_pm_notify), and that broke SDIO's expectation that mmc_suspend_host() will remove the card, and squash the error, in case -ENOSYS is returned from the bus suspend handler (mmc_sdio_suspend() in this case). mmc_sdio_suspend() is using this whenever at least one of the card's SDIO function drivers does not have suspend/resume handlers - in that case it is agreed to force removal of the entire card. This patch fixes this regression by trivially bringing back that part of mmc_suspend_host(), which was removed by 4c2ef25fe0b. Reported-and-tested-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: <stable@kernel.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-15Merge branch 'upstream-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Add Cando touch screen 15.6-inch product id HID: Add MULTI_INPUT quirk for turbox/mosart touchscreen HID: hidraw, fix a NULL pointer dereference in hidraw_write HID: hidraw, fix a NULL pointer dereference in hidraw_ioctl
2010-10-15Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: ubd: fix incorrect sector handling during request restart ps3disk: passing wrong variable to bvec_kunmap_irq()
2010-10-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ehea: Fix a checksum issue on the receive path net: allow FEC driver to use fixed PHY support tg3: restore rx_dropped accounting b44: fix carrier detection on bind net: clear heap allocations for privileged ethtool actions NET: wimax, fix use after free ATM: iphase, remove sleep-inside-atomic ATM: mpc, fix use after free ATM: solos-pci, remove use after free net/fec: carrier off initially to avoid root mount failure r8169: use device model DMA API r8169: allocate with GFP_KERNEL flag when able to sleep
2010-10-13Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: ioat2: fix performance regression
2010-10-13Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: Silent spurious error message drm/radeon/kms: fix bad cast/shift in evergreen.c drm/radeon/kms: make TV/DFP table info less verbose drm/radeon/kms: leave certain CP int bits enabled drm/radeon/kms: avoid corner case issue with unmappable vram V2
2010-10-13ioat2: fix performance regressionDan Williams
Commit 0793448 "DMAENGINE: generic channel status v2" changed the interface for how dma channel progress is retrieved. It inadvertently exported an internal helper function ioat_tx_status() instead of ioat_dma_tx_status(). The latter polls the hardware to get the latest completion state, while the helper just evaluates the current state without touching hardware. The effect is that we end up waiting for completion timeouts or descriptor allocation errors before the completion state is updated. iperf (before fix): [SUM] 0.0-41.3 sec 364 MBytes 73.9 Mbits/sec iperf (after fix): [SUM] 0.0- 4.5 sec 499 MBytes 940 Mbits/sec This is a regression starting with 2.6.35. Cc: <stable@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com> Reported-by: Richard Scobie <richard@sauce.co.nz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-13ehea: Fix a checksum issue on the receive pathBreno Leitao
Currently we set all skbs with CHECKSUM_UNNECESSARY, even those whose protocol we don't know. This patch just add the CHECKSUM_COMPLETE tag for non TCP/UDP packets. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-13net: allow FEC driver to use fixed PHY supportGreg Ungerer
At least one board using the FEC driver does not have a conventional PHY attached to it, it is directly connected to a somewhat simple ethernet switch (the board is the SnapGear/LITE, and the attached 4-port ethernet switch is a RealTek RTL8305). This switch does not present the usual register interface of a PHY, it presents nothing. So a PHY scan will find nothing - it finds ID's of 0 for each PHY on the attached MII bus. After the FEC driver was changed to use phylib for supporting PHYs it no longer works on this particular board/switch setup. Add code support to use a fixed phy if no PHY is found on the MII bus. This is based on the way the cpmac.c driver solved this same problem. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-13HID: Add Cando touch screen 15.6-inch product idFrançois Jaouen
This add the product id of the touch screen found on ACER Aspire 5738PZ. Works with hid-cando driver. Signed-off-by: Francois Jaouen<francois.jaouen@laposte.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-12ps3disk: passing wrong variable to bvec_kunmap_irq()Dan Carpenter
This should pass "buf" to bvec_kunmap_irq() instead of "bv". The api is like kmap_atomic() instead of kmap(). Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-12drm/radeon/kms: Silent spurious error messageJean Delvare
I see the following error message in my kernel log from time to time: radeon 0000:07:00.0: ffff88007c334000 reserve failed for wait radeon 0000:07:00.0: ffff88007c334000 reserve failed for wait After investigation, it turns out that there's nothing to be afraid of and everything works as intended. So remove the spurious log message. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-12drm/radeon/kms: fix bad cast/shift in evergreen.cAlex Deucher
Missing parens. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=30718 Reported-by: Dave Gilbert <freedesktop@treblig.org> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Reviewed-by: Matt Turner <mattst88@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-12drm/radeon/kms: make TV/DFP table info less verboseAlex Deucher
Make TV standard and DFP table revisions debug only. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-12drm/radeon/kms: leave certain CP int bits enabledAlex Deucher
These bits are used for internal communication and should be left enabled. This may fix s/r issues on some systems. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-12drm/radeon/kms: avoid corner case issue with unmappable vram V2Jerome Glisse
We should not allocate any object into unmappable vram if we have no means to access them which on all GPU means having the CP running and on newer GPU having the blit utility working. This patch limit the vram allocation to visible vram until we have acceleration up and running. Note that it's more than unlikely that we run into any issue related to that as when acceleration is not woring userspace should allocate any object in vram beside front buffer which should fit in visible vram. V2 use real_vram_size as mc_vram_size could be bigger than the actual amount of vram [airlied: fixup r700_cp_stop case] Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-12HID: Add MULTI_INPUT quirk for turbox/mosart touchscreenPierre BAILLY
This device generates ABS_Z and ABS_RX events, while it should be generating ABS_X and ABS_Y instead. Using the MULTI_INPUT quirk solves this issue. Reference: https://bugs.launchpad.net/ubuntu/+bug/620609/ Signed-off-by: Pierre BAILLY <pierre@substantiel.fr> Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-11tg3: restore rx_dropped accountingEric Dumazet
commit 511d22247be7 (tg3: 64 bit stats on all arches), overlooked the rx_dropped accounting. We use a full "struct rtnl_link_stats64" to hold rx_dropped value, but forgot to report it in tg3_get_stats64(). Use an "unsigned long" instead to shrink "struct tg3" by 176 bytes, and report this value to stats readers. Increment rx_dropped counter for oversized frames. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Michael Chan <mchan@broadcom.com> CC: Matt Carlson <mcarlson@broadcom.com> Acked-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11b44: fix carrier detection on bindPaul Fertser
For carrier detection to work properly when binding the driver with a cable unplugged, netif_carrier_off() should be called after register_netdev(), not before. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11NET: wimax, fix use after freeJiri Slaby
Stanse found that i2400m_rx frees skb, but still uses skb->len even though it has skb_len defined. So use skb_len properly in the code. And also define it unsinged int rather than size_t to solve compilation warnings. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: linux-wimax@intel.com Acked-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11ATM: iphase, remove sleep-inside-atomicJiri Slaby
Stanse found that ia_init_one locks a spinlock and inside of that it calls ia_start which calls: * request_irq * tx_init which does kmalloc(GFP_KERNEL) Both of them can thus sleep and result in a deadlock. I don't see a reason to have a per-device spinlock there which is used only there and inited right before the lock location. So remove it completely. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>