summaryrefslogtreecommitdiff
path: root/drivers/w1
AgeCommit message (Collapse)Author
2021-05-26w1: ds2482: fix kernel-doc syntax in fileAditya Srivastava
The opening comment mark '/**' is used for highlighting the beginning of kernel-doc comments. The comments for drivers/w1/masters/ds2482.c follows this syntax, but the content inside does not comply with kernel-doc. Similarly, the syntax for function and arguments declaration as well. Fix all such occurrences appropriately. Tested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Aditya Srivastava <yashsri421@gmail.com> Link: https://lore.kernel.org/r/20210523150122.21160-1-yashsri421@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21w1: ds2438: support for writing to offset registerLuiz Sampaio
Added a sysfs entry to support writing to the offset register on page1. This register is used to calibrate the chip canceling offset errors in the current ADC. This means that, over time, reading the IAD register will not return the correct current measurement, it will have an offset. Writing to the offset register if the two's complement of the current register while passing zero current to the load will calibrate the measurements. This change was tested on real hardware and it was able to calibrate the chip correctly. Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com> Link: https://lore.kernel.org/r/20210519223046.13798-7-sampaio.ime@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21w1: ds2438: adding support for reading page1Luiz Sampaio
Added a sysfs entry to support reading the page1 registers. This registers contain Elapsed Time Meter (ETM) data, which shows for how long the chip is on, as well as an Offset Register data, which can be used to calibrate the current measurement of the chip. Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com> Link: https://lore.kernel.org/r/20210519223046.13798-6-sampaio.ime@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21w1: ds2438: fixing bug that would always get page0Luiz Sampaio
The purpose of the w1_ds2438_get_page function is to get the register values at the page passed as the pageno parameter. However, the page0 was hardcoded, such that the function always returned the page0 contents. Fixed so that the function can retrieve any page. Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com> Link: https://lore.kernel.org/r/20210519223046.13798-5-sampaio.ime@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21w1: ds2438: changed sysfs macro for rw fileLuiz Sampaio
The iad sysfs file has permissions for read and write. Changed to the recommended macro BIN_ATTR_RW. Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com> Link: https://lore.kernel.org/r/20210519223046.13798-4-sampaio.ime@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21w1: ds2438: fixed if brackets coding style issueLuiz Sampaio
Since there is only one statement inside the if clause, no brackets are required. Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com> Link: https://lore.kernel.org/r/20210519223046.13798-3-sampaio.ime@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21w1: ds2438: fixed a coding style issueLuiz Sampaio
There is an if statement and, if the function goes into it, it returns. So, the next else is not required. Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com> Link: https://lore.kernel.org/r/20210519223046.13798-2-sampaio.ime@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21w1: w1_therm: fix build warning in w1_seq_show()Yang Yingliang
Fix the following build warning: drivers/w1/slaves/w1_therm.c: In function ‘w1_seq_show’: drivers/w1/slaves/w1_therm.c:2059:6: warning: variable ‘rv’ set but not used [-Wunused-but-set-variable] int rv; ^~ Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210518050415.615783-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21w1: w1_therm: correct function name bulk_read_support()Yang Yingliang
Fix the following make W=1 kernel build warning: drivers/w1/slaves/w1_therm.c:843: warning: expecting prototype for support_bulk_read(). Prototype was for bulk_read_support() instead Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210518050401.615648-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-10w1: ds28e17: Use module_w1_family to simplify the codeChen Huang
module_w1_family() makes the code simpler by eliminating boilerplate code. Signed-off-by: Chen Huang <chenhuang5@huawei.com> Link: https://lore.kernel.org/r/20210408130954.1158963-2-chenhuang5@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-10w1: ds2805: Use module_w1_family to simplify the codeChen Huang
module_w1_family() makes the code simpler by eliminating boilerplate code. Signed-off-by: Chen Huang <chenhuang5@huawei.com> Link: https://lore.kernel.org/r/20210408130954.1158963-1-chenhuang5@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-24w1: slaves: Typo fixesBhaskar Chowdhury
s/mesured/measured/ .......twice Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Link: https://lore.kernel.org/r/20210319052554.966-1-unixbhaskar@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-24w1: Use kobj_to_dev()[RESEND]dongjian
Use kobj_to_dev() instead of open-coding it Signed-off-by: dongjian <dongjian@yulong.com> Link: https://lore.kernel.org/r/1615877987-32163-1-git-send-email-dj0227@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-24w1: w1_therm: use clamp() in int_to_short()Dan Carpenter
It's slightly cleaner to use the clamp() macro instead of open coding this. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YEedHNwqEH8fvjkD@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27w1: w1_therm: Fix conversion result for negative temperaturesIvan Zaentsev
DS18B20 device driver returns an incorrect value for negative temperatures due to a missing sign-extension in w1_DS18B20_convert_temp(). Fix by using s16 temperature value when converting to int. Fixes: 9ace0b4dab1c (w1: w1_therm: Add support for GXCAS GX20MH01 device.) Cc: stable <stable@vger.kernel.org> Reported-by: Paweł Marciniak <sunwire@gmail.com> Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Link: https://lore.kernel.org/r/20210121093021.224764-1-ivan.zaentsev@wirenboard.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-20w1/masters/ds2490: queue up found IDs during scanChristian Vogel
Queue up found IDs in a buffer and run the callback once for each found ID at the end. This is necessary because we hold the bus_mutex during the whole scan, and some of the "add-device" callbacks deadlock as they themselves want to mutex_lock(bus_mutex). Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Christian Vogel <vogelchr@vogel.cx> Link: https://lore.kernel.org/r/20210113195018.7498-3-vogelchr@vogel.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-20w1/w1.c: w1 address crc quick for DS28E04 eepromsChristian Vogel
Onewire addresses are 64bit family(8bit), unique_id(48bit), crc(8bit) (LSBt to MSB) and self-consistent: crc = crc8(family, unique). DS28E04-100 4096-Bit Addressable 1-Wire EEPROM with PIO have strap pins to set 7 LSB of the address, unfortunately without updating the crc part of the address. It is only consistent if all strap pins float high. [see datasheet 19-6134; Rev 12/11 page 6: 64-bit device id number] We therefore introduce a special handling of family 0x1c (DS28E04) to check address consistency with 7 LSBs of the unique_id set to 1. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Christian Vogel <vogelchr@vogel.cx> Link: https://lore.kernel.org/r/20210113195018.7498-2-vogelchr@vogel.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-12w1: w1_therm: Rename conflicting sysfs attribute 'eeprom' to 'eeprom_cmd'Ivan Zaentsev
Duplicate attribute 'eeprom' is defined in: 1) Documentation/ABI/testing/sysfs-driver-w1_therm 2) Documentation/ABI/stable/sysfs-driver-w1_ds28e04 Both drivers define an attribute: /sys/bus/w1/devices/.../eeprom with conflicting behavior. Fix by renaming the newer one in w1_therm.c to 'eeprom_cmd'. Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/lkml/20201029152845.6bbb39ce@coco.lan/ Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Link: https://lore.kernel.org/r/20201112064931.8471-1-ivan.zaentsev@wirenboard.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05w1: w1_therm: make w1_poll_completion staticGreg Kroah-Hartman
kernel test robot rightly points out that w1_poll_completion() should be static, so mark it as such. Cc: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20201005123703.GA800532@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05w1: Constify static w1_family_ops structsRikard Falkeborn
The only usage of these structs is to assign their address to the fops field in the w1_family struct, which is a const pointer. Make them const to allow the compiler to put them in read-only memory. This was done with the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @r1 disable optional_qualifier @ identifier i; position p; @@ static struct w1_family_ops i@p = {...}; @ok1@ identifier r1.i; position p; identifier s; @@ static struct w1_family s = { .fops=&i@p, }; @bad1@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad1 disable optional_qualifier@ identifier r1.i; @@ static +const struct w1_family_ops i={}; // </smpl> Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20201004193202.4044-3-rikard.falkeborn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05w1: Constify struct w1_family_opsRikard Falkeborn
The fops field in the w1_family struct is never modified. Make it const to indicate that. Constifying the pointer makes it possible for drivers to declare static w1_family_ops structs const, which in turn will allow the compiler to put it in read-only memory. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20201004193202.4044-2-rikard.falkeborn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02w1: mxc_w1: Fix timeout resolution problem leading to bus errorMartin Fuzzey
On my platform (i.MX53) bus access sometimes fails with w1_search: max_slave_count 64 reached, will continue next search. The reason is the use of jiffies to implement a 200us timeout in mxc_w1_ds2_touch_bit(). On some platforms the jiffies timer resolution is insufficient for this. Fix by replacing jiffies by ktime_get(). For consistency apply the same change to the other use of jiffies in mxc_w1_ds2_reset_bus(). Fixes: f80b2581a706 ("w1: mxc_w1: Optimize mxc_w1_ds2_touch_bit()") Cc: stable <stable@vger.kernel.org> Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Link: https://lore.kernel.org/r/1601455030-6607-1-git-send-email-martin.fuzzey@flowbird.group Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02w1: w1_therm: Add support for GXCAS GX20MH01 device.Ivan Zaentsev
GX20MH01 device shares family number 0x28 with DS18B20. The device is generally compatible with DS18B20. Added are the lowest 2^-5, 2^-6 temperature bits in Config register; R2 bit in Config register enabling 13 and 14 bit resolutions. It is powered up in 14 bit mode. Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Link: https://lore.kernel.org/r/20200904160004.87710-2-ivan.zaentsev@wirenboard.ru Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02w1: w1_therm: Add sysfs entries to control conversion time and driver featuresIvan Zaentsev
The conversion time of common DS18B20 clones deviates from datasheet specs. Allow adjustment and automatic measure of the conversion time. Add 'conv_time' sysfs attribute: *read*: Current conversion time in milliseconds. *write*: '0': Set default conversion time. '1': Measure and set the conversion time. Make a single temperature conversion, poll and measure an actual value. Measured value is increased by 20% for temperature drift. A new conversion time is returned by reading the same attribute. other positive value: Set the conversion time in milliseconds. The setting is active until a resolution change. Then it is reset to default conversion time for a new resolution. Add 'features' sysfs attribute to control optional driver settings per device. Bit masks to read/write (logical OR): 1: Enable check for conversion success. If byte 6 of scratchpad memory is 0xC after conversion, and temperature reads 85.00 (powerup value) or 127.94 (insufficient power) - return a conversion error. 2: Enable poll for conversion completion. Generate read cycles after the conversion start and wait for 1's. In parasite power mode this feature is not available. There are some clones of DS18B20 with fixed 12 bit resolution. Make the driver verify the resolution by reading back the device after resolution change. Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Link: https://lore.kernel.org/r/20200904160004.87710-1-ivan.zaentsev@wirenboard.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-15w1: Replace zero-length array with flexible-arrayGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-27w1: omap-hdq: print dev_err if irq flags are not clearedH. Nikolaus Schaller
If irq flags are not cleared for certain operations we print an error message. Since this should never occur in normal operation, this patch is an optional safety-net and debugging tool. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/2de305d3046c7281a7123347899abbaa64c54fb8.1590255176.git.hns@goldelico.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27w1: omap-hdq: fix interrupt handling which did show spurious timeoutsH. Nikolaus Schaller
Since commit 27d13da8782a ("w1: omap-hdq: Simplify driver with PM runtime autosuspend") was applied, I did see timeouts and wrong values when reading a bq27000 connected to hdq of the omap3. This occurred mainly after boot but remained and only sometimes settled down after several reads. root@letux:~# time cat /sys/class/power_supply/bq27000-battery/uevent POWER_SUPPLY_NAME=bq27000-battery POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_VOLTAGE_NOW=0 POWER_SUPPLY_CURRENT_NOW=0 POWER_SUPPLY_CAPACITY=0 POWER_SUPPLY_CAPACITY_LEVEL=Normal POWER_SUPPLY_TEMP=-2731 POWER_SUPPLY_TIME_TO_EMPTY_NOW=0 POWER_SUPPLY_TIME_TO_EMPTY_AVG=0 POWER_SUPPLY_TIME_TO_FULL_NOW=0 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CHARGE_FULL=0 POWER_SUPPLY_CHARGE_NOW=0 POWER_SUPPLY_CHARGE_FULL_DESIGN=0 POWER_SUPPLY_CYCLE_COUNT=0 POWER_SUPPLY_ENERGY_NOW=0 POWER_SUPPLY_POWER_AVG=0 POWER_SUPPLY_HEALTH=Good POWER_SUPPLY_MANUFACTURER=Texas Instruments real    0m15.761s user    0m0.001s sys     0m0.025s root@letux:~# Sometimes the effect did disappear after accessing the device multiple times, speed went up and results became correct. All this indicates that some interrupts from the hdq controller are lost by the driver. Enabling debugging revealed that there were spurious tx and rx timeouts, i.e. the driver does not always recognise interrupts. The main problem is that rx and tx interrupts share a single variable which was sometimes reset to 0 wiping out other interrupts. And it was overwritten by a second interrupt, independent of whether the previous interrupt was already processed or not. This patch improves interrupt handling to avoid such races and loss of interrupt flags. The ideas are: * only the hdq_isr() sets bits in hdq_status * it does not reset any bits * it does wake_up() if any interrupt is pending * bits are only reset by the read/write/break functions if they were waited for * this makes sure that no interrupts can be lost * rx/tx/timeout bits are completely decoupled from each other (and not reset all after waiting for any of them) * which bits to reset is now specified by a new parameter to hdq_reset_irqstatus() * hdq_reset_irqstatus() also returns the state before resetting so that we can encapsulate the spinlock * this should now handle the case that the write and read are both already finished quickly before the hdq_write_byte() ends. * Or that two interrupts occur in succession before they are processed by the driver. Old code may have reset all status bits making the next hdq_read_byte() timeout. * the spinlock now always protects changing of bits in function hdq_reset_irqstatus() which could become a read-write-modify problem if the interrupt handler tries to read-modify-write exactly at the same moment * we add mutex protection also for hdq_write_byte() just to be safe to not to disturb a hdq_read_byte() triggered by some other thread/process. This patch was tested on a GTA04 and results in no boot problems any more. And first read after boot is now ok: root@letux:~# time cat /sys/class/power_supply/bq27000-battery/uevent POWER_SUPPLY_NAME=bq27000-battery POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_VOLTAGE_NOW=3970000 POWER_SUPPLY_CURRENT_NOW=354144 POWER_SUPPLY_CAPACITY=82 POWER_SUPPLY_CAPACITY_LEVEL=Normal POWER_SUPPLY_TEMP=266 POWER_SUPPLY_TIME_TO_EMPTY_NOW=7680 POWER_SUPPLY_TIME_TO_EMPTY_AVG=7380 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CHARGE_FULL=934856 POWER_SUPPLY_CHARGE_NOW=763976 POWER_SUPPLY_CHARGE_FULL_DESIGN=1233792 POWER_SUPPLY_CYCLE_COUNT=82 POWER_SUPPLY_ENERGY_NOW=2852840 POWER_SUPPLY_POWER_AVG=1392840 POWER_SUPPLY_HEALTH=Good POWER_SUPPLY_MANUFACTURER=Texas Instruments real 0m0.233s user 0m0.000s sys 0m0.025s root@letux:~# It was also tested with dev_dbg enabled and more printk that all activities behave correctly, especially hdq_write_byte(), hdq_read_byte(), omap_hdq_break(). Not tested is omap_w1_triplet(). Fixes: 27d13da8782a ("w1: omap-hdq: Simplify driver with PM runtime autosuspend") Cc: stable@vger.kernel.org # v5.6+ Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/68fc8623ae741878beef049273696d2377526165.1590255176.git.hns@goldelico.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27w1: omap-hdq: fix return value to be -1 if there is a timeoutH. Nikolaus Schaller
omap_w1_read_byte() should return -1 (or 0xff) in case of error (e.g. missing battery). The code accidentially overwrites the variable ret and not val, which is returned. So it will return the initial value 0 instead of -1. Fixes: 27d13da8782a ("w1: omap-hdq: Simplify driver with PM runtime autosuspend") Cc: stable@vger.kernel.org # v5.6+ Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/b2c2192b461fbb9b8e9bea4ad514a49557a7210b.1590255176.git.hns@goldelico.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27w1: omap-hdq: cleanup to add missing newline for some dev_dbgH. Nikolaus Schaller
Otherwise it will corrupt the console log during debugging. Fixes: 7b5362a603a1 ("w1: omap_hdq: Fix some error/debug handling.") Cc: stable@vger.kernel.org Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/cd0d55749a091214106575f6e1d363c6db56622f.1590255176.git.hns@goldelico.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-21w1_therm: remove redundant assignments to variable retColin Ian King
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200519154553.873413-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-21w1_therm: Free the correct variableDan Carpenter
The problem is that we change "p_args" to point to the middle of the string so when we free it at the end of the function it's not freeing the same pointer that we originally allocated. Fixes: e2c94d6f5720 ("w1_therm: adding alarm sysfs entry") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200520120019.GA172354@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15w1_therm: adding bulk read support to trigger multiple conversion on busAkira Shimahara
Adding bulk read support: Sending a 'trigger' command in the dedicated sysfs entry of bus master device send a conversion command for all the slaves on the bus. The sysfs entry is added as soon as at least one device supporting this feature is detected on the bus. The behavior of the sysfs reading temperature on the device is as follow: * If no bulk read pending, trigger a conversion on the device, wait for the conversion to be done, read the temperature in device RAM * If a bulk read has been trigger, access directly the device RAM This behavior is the same on the 2 sysfs entries ('temperature' and 'w1_slave'). Reading the therm_bulk_read sysfs give the status of bulk operations: * '-1': conversion in progress on at least 1 sensor * '1': conversion complete but at least one sensor has not been read yet * '0': no bulk operation. Reading temperature on ecah device will trigger a conversion As not all devices support bulk read feature, it has been added in device family structure. The attribute is set at master level as soon as a supporting device is discover. It is removed when the last supported device leave the bus. The count of supported device is kept with the static counter bulk_read_device_counter. A strong pull up is apply on the line if at least one device required it. The duration of the pull up is the max time required by a device on the line, which depends on the resolution settings of each device. The strong pull up could be adjust with the a module parameter. Updating documentation in Documentation/ABI/testing/sysfs-driver-w1_therm and Documentation/w1/slaves/w1_therm.rst accordingly. Signed-off-by: Akira Shimahara <akira215corp@gmail.com> Link: https://lore.kernel.org/r/20200511203820.411483-1-akira215corp@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15w1_therm: adding alarm sysfs entryAkira Shimahara
Adding device alarms settings by a dedicated sysfs entry alarms (RW): read or write TH and TL in the device RAM. Checking devices in alarm state could be performed using the master search command. As alarms temperature level are store in a 8 bit register on the device and are signed values, a safe cast shall be performed using the min and max temperature that device are able to measure. This is done by int_to_short inline function. A 'write_data' field is added in the device structure, to bind the correct writing function, as some devices may have 2 or 3 bytes RAM. Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly. Signed-off-by: Akira Shimahara <akira215corp@gmail.com> Link: https://lore.kernel.org/r/20200511203801.411253-1-akira215corp@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15w1_therm: optimizing temperature read timingsAkira Shimahara
Optimizing temperature reading by reducing waiting conversion time according to device resolution settings, as per device specification. This is device dependent as not all the devices supports resolution setting, so it has been added in device family structures. The process to read the temperature on the device has been adapted in a new function 'convert_t()', which replace the former 'read_therm()', is introduce to deal with this timing. Strong pull up is also applied during the required time, according to device power status needs and 'strong_pullup' module parameter. 'temperature_from_RAM()' function is introduced to get the correct temperature computation (device dependent) from device RAM data. An new sysfs entry has been added to ouptut only temperature. The old entry w1_slave has been kept for compatibility, without changing its output format. Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly. Signed-off-by: Akira Shimahara <akira215corp@gmail.com> Link: https://lore.kernel.org/r/20200511203742.411039-1-akira215corp@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15w1_therm: adding eeprom sysfs entryAkira Shimahara
The driver implement 2 hardware functions to access device RAM: * copy_scratchpad * recall_scratchpad They act according to device specifications. As EEPROM operations are not device dependent (all w1_therm can perform EEPROM read/write operation following the same protocol), it is removed from device families structures. Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly. Signed-off-by: Akira Shimahara <akira215corp@gmail.com> Link: https://lore.kernel.org/r/20200511203725.410844-1-akira215corp@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15w1_therm: adding resolution sysfs entryAkira Shimahara
Adding resolution sysfs entry (RW) to get or set the device resolution Write values are managed as follow: * '9..12': resolution to set in bit * Anything else: do nothing Read values are : * '9..12': device resolution in bit * '-xx': xx is kernel error when reading the resolution Only supported devices will show the sysfs entry. A new family has been created for DS18S20 devices as they do not implement resolution feature. The resolution of each device is check when the device is discover by the bus master, in 'w1_therm_add_slave(struct w1_slave *)'. The status is stored in the device structure w1_therm_family_data so that the driver always knows the resolution of each device, which could be used later to determine the required conversion duration (resolution dependent). The resolution is re evaluate each time a user read or write the sysfs entry. To avoid looping through the w1_therm_families at run time, the pointer 'specific_functions' is set up to the correct 'w1_therm_family_converter' when the slave is added (which mean when it is discovered by the master). This initialization is done by a helper function 'device_family(struct w1_slave *sl)', and a dedicated macro 'SLAVE_SPECIFIC_FUNC(sl)' allow the access to the specific function of the slave device. 'read_scratchpad' and 'write_scratchpad' are the hardware functions to access the device RAM, as per protocol specification. It cancel the former 'precision' functions, which was only set and never read (so not stored in the device struct). Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly. Signed-off-by: Akira Shimahara <akira215corp@gmail.com> Link: https://lore.kernel.org/r/20200511203708.410649-1-akira215corp@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15w1_therm: adding ext_power sysfs entryAkira Shimahara
Adding ext_power sysfs entry (RO). Return the power status of the device: - 0: device parasite powered - 1: device externally powered - xx: xx is kernel error The power status of each device is check when the device is discover by the bus master, in 'w1_therm_add_slave(struct w1_slave *)'. The status is stored in the device structure w1_therm_family_data so that the driver always knows the power state of each device, which could be used later to determine the required strong pull up to apply on the line. The power status is re evaluate each time the sysfs ext_power read by a user. The hardware function 'read_powermode(struct w1_slave *sl)' act just as per device specifications, sending W1_READ_PSUPPLY command on the bus, and issue a read time slot, reading only one bit. A helper function 'bool bus_mutex_lock(struct mutex *lock)' is introduced. It try to aquire the bus mutex several times (W1_THERM_MAX_TRY), waiting W1_THERM_RETRY_DELAY between two attempt. Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly. Signed-off-by: Akira Shimahara <akira215corp@gmail.com> Link: https://lore.kernel.org/r/20200511203650.410439-1-akira215corp@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15w1_therm: fix reset_select_slave during discoveryAkira Shimahara
Fix reset_select_slave issue during devices discovery by the master on bus. The w1_reset_select_slave() from w1_io.c, which was previously used, assume that if the slave count is 1 there is only one slave attached on the bus. This is not always true. For example when discovering devices, when the first device is discover by the bus master, its slave count is 1, but some other slaves may be on the bus. In that case instead of adressing command to the attached slave the master throw a SKIP ROM command so that all slaves attached on the bus will answer simultenaously causing data collision. A dedicated reset_select_slave() function is implemented here, it always perform an adressing to each slave using the MATCH ROM command. Signed-off-by: Akira Shimahara <akira215corp@gmail.com> Link: https://lore.kernel.org/r/20200511203610.409975-1-akira215corp@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15w1_therm: adding code comments and code reorderingAkira Shimahara
Adding code comments to split code in dedicated parts. After the global declarations (defines, macros and function declarations), code is organized as follow : - Device and family dependent structures and functions - Interfaces functions - Helpers functions - Hardware functions - Sysfs interface functions Signed-off-by: Akira Shimahara <akira215corp@gmail.com> Link: https://lore.kernel.org/r/20200511203535.409599-1-akira215corp@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15w1: ds2430: fix eeprom size in driver descriptionAngelo Dureghello
Non functional fix, set Kb to b, to avoid any misundertanding. Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Link: https://lore.kernel.org/r/20200507195050.472483-1-angelo.dureghello@timesys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29Merge tag 'char-misc-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc/whatever driver changes for 5.6-rc1 Included in here are loads of things from a variety of different driver subsystems: - soundwire updates - binder updates - nvmem updates - firmware drivers updates - extcon driver updates - various misc driver updates - fpga driver updates - interconnect subsystem and driver updates - bus driver updates - uio driver updates - mei driver updates - w1 driver cleanups - various other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (86 commits) mei: me: add jasper point DID char: hpet: Use flexible-array member binder: fix log spam for existing debugfs file creation. mei: me: add comet point (lake) H device ids nvmem: add QTI SDAM driver dt-bindings: nvmem: add binding for QTI SPMI SDAM dt-bindings: imx-ocotp: Add i.MX8MP compatible dt-bindings: soundwire: fix example soundwire: cadence: fix kernel-doc parameter descriptions soundwire: intel: report slave_ids for each link to SOF driver siox: Use the correct style for SPDX License Identifier w1: omap-hdq: Simplify driver with PM runtime autosuspend firmware: stratix10-svc: Remove unneeded semicolon firmware: google: Probe for a GSMI handler in firmware firmware: google: Unregister driver_info on failure and exit in gsmi firmware: google: Release devices before unregistering the bus slimbus: qcom: add missed clk_disable_unprepare in remove slimbus: Use the correct style for SPDX License Identifier slimbus: qcom-ngd-ctrl: Use dma_request_chan() instead dma_request_slave_channel() dt-bindings: SLIMBus: add slim devices optional properties ...
2020-01-14w1: omap-hdq: Simplify driver with PM runtime autosuspendTony Lindgren
We've had generic code handling module sysconfig and OCP reset registers for omap variants for many years now and all the drivers really needs to do is just call runtime PM functions. Looks like the omap-hdq driver got only partially updated over the years to use runtime PM, and still has lots of custom PM code left. We can replace all the custom code for sysconfig, OCP reset, and PM with just a few lines of runtime PM autosuspend code. In order to set the device mode properly when pm_runtime_get_sync() is called during probe, we need to also move parsing of "ti,mode" to happen earlier before we call pm_runtime_enable(). Since we now disable interrupts lazily in omap_hdq_runtime_suspend(), we must remove the call to hdq_disable_interrupt() in omap_w1_read_byte(). And we must clear irqstatus calling wait_event_timeout() on it, so let's add hdq_reset_irqstatus() for that. Note that the earlier driver specific usage count limit of four seems completely artificial and should not be an issue in normal use. Cc: Adam Ford <aford173@gmail.com> Cc: Andrew F. Davis <afd@ti.com> Cc: Andreas Kemnade <andreas@kemnade.info> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Vignesh R <vigneshr@ti.com> Tested-by: Andreas Kemnade <andreas@kemnade.info> # gta04 Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20191217004048.46298-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-11-14w1: new driver. DS2430 chipAngelo Dureghello
add support for ds2430, 1 page, 256bit (32bytes) eeprom (family 0x14). Tests done: 32 bytes dump: x@y:~# hexdump -C -n 32 /sys/bus/w1/devices/14-00000158556e/eeprom 00000000 39 39 0a 00 00 36 0a ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 34 bytes dump: 32 only displayed x@y:~# hexdump -C -n 34 /sys/bus/w1/devices/14-00000158556e/eeprom 00000000 39 39 0a 00 00 36 0a ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 pattern write: x@y:~# echo 123456789 > /sys/bus/w1/devices/14-00000158556e/eeprom x@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom 00000000 31 32 33 34 35 36 37 38 39 0a ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 specific address 1-byte write x@y:~# dd if=/dev/zero of=/sys/bus/w1/devices/14-00000158556e/eeprom \ count=1 bs=1 seek=4 1+0 records in 1+0 records out x@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom 00000000 31 32 33 34 00 36 37 38 39 0a ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 writing binary block x@y:~# cat dump-128bytes.bin > /sys/bus/w1/devices/14-00000158556e/eeprom cat: write error: File too large x@y:~# cat dump-32bytes.bin > /sys/bus/w1/devices/14-00000158556e/eeprom x@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom 00000000 10 0b 5b ff ff ff ff ff ff ff ff ff ff ff ff ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 40 00000020 Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Link: https://lore.kernel.org/r/20191019204015.61474-1-angelo.dureghello@timesys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-14Merge 5.4-rc3 into char-misc-nextGreg Kroah-Hartman
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10w1: ds250x: Fix build error without CRC16YueHaibing
If CRC16 is not set, building will fails: drivers/w1/slaves/w1_ds250x.o: In function `w1_ds2505_read_page': w1_ds250x.c:(.text+0x82f): undefined reference to `crc16' w1_ds250x.c:(.text+0x90a): undefined reference to `crc16' w1_ds250x.c:(.text+0x91a): undefined reference to `crc16' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 25ec8710d9c2 ("w1: add DS2501, DS2502, DS2505 EPROM device driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190920060318.35020-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10w1: sgi_w1: use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20191009144435.12656-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04w1: add DS2501, DS2502, DS2505 EPROM device driverThomas Bogendoerfer
Add a 1-Wire slave driver to support DS250x EPROM deivces. This slave driver attaches the devices to the NVMEM subsystem for an easy in-kernel usage. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Link: https://lore.kernel.org/r/20190831082623.15627-3-tbogendoerfer@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04w1: add 1-wire master driver for IP block found in SGI ASICsThomas Bogendoerfer
Starting with SGI Origin machines nearly every new SGI ASIC contains an 1-Wire master. They are used for attaching One-Wire prom devices, which contain information about part numbers, revision numbers, serial number etc. and MAC addresses for ethernet interfaces. This patch adds a master driver to support this IP block. It also adds an extra field dev_id to struct w1_bus_master, which could be in used in slave drivers for creating unique device names. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Link: https://lore.kernel.org/r/20190831082623.15627-2-tbogendoerfer@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-25 08:57:07 +0000