summaryrefslogtreecommitdiff
path: root/drivers/usb/host/pci-quirks.c
AgeCommit message (Collapse)Author
2023-10-02usb: pci-quirks: handle HAS_IOPORT dependency for UHCI handoffNiklas Schnelle
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. With the AMD quirk handled USB PCI quirks still use inw() in uhci_check_and_reset_hc() and thus indirectly in quirk_usb_handoff_uhci(). Handle this by conditionally compiling uhci_check_and_reset_hc() and stubbing out quirk_usb_handoff_uhci() when HAS_IOPORT is not available. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230911125653.1393895-4-schnelle@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-02usb: pci-quirks: handle HAS_IOPORT dependency for AMD quirkNiklas Schnelle
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. In the pci-quirks case the I/O port acceses are used in the quirks for several AMD south bridges, Add a config option for the AMD quirks to depend on HAS_IOPORT and #ifdef the quirk code. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230911125653.1393895-3-schnelle@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-02usb: pci-quirks: group AMD specific quirk code togetherNiklas Schnelle
A follow on patch will introduce CONFIG_USB_PCI_AMD governing the AMD quirk and adding its compile time dependency on HAS_IOPORT. In order to minimize the number of #ifdefs in C files and make that patch easier to read first group the code together. This is pure code movement no functional change is intended. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230911125653.1393895-2-schnelle@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-29usb: pci-quirks: Reduce the length of a spinlock section in ↵Christophe JAILLET
usb_amd_find_chipset_info() 'info' is local to the function. There is no need to zeroing it within a spin_lock section. Moreover, there is no need to explicitly initialize the .need_pll_quirk field. Initialize the structure when defined and remove the now useless memset(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/08ee42fced6af6bd56892cd14f2464380ab071fa.1679600396.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-25usb: pci-quirks: convert to readl_poll_timeout_atomic()Chunfeng Yun
Use readl_poll_timeout_atomic() to simplify code Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1600668815-12135-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-31Merge 5.9-rc3 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-18usb: host: pci-quirks: Bypass xHCI quirks for Raspberry Pi 4Nicolas Saenz Julienne
The board doesn't need the quirks to be run, and takes care of its own initialization through a reset controller device. So let's bypass them. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20200629161845.6021-8-nsaenzjulienne@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18Revert "USB: pci-quirks: Add Raspberry Pi 4 quirk"Nicolas Saenz Julienne
This reverts commit c65822fef4adc0ba40c37a47337376ce75f7a7bc. The initialization of Raspberry Pi 4's USB chip is now handled through a reset controller. No need to directly call the firmware routine through a PCI quirk. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20200629161845.6021-7-nsaenzjulienne@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: host: pci-quirks: Demote function header from kerneldoc to comment blockLee Jones
quirk_usb_handoff_xhci()'s function header is the only one across the sourcefile which is denoted as a kerneldoc header. Despite no attempt to document its arguments. Drop it down in status from kerneldoc to a standard comment block to match the other headers in the file. Fixes the following W=1 kernel build warning: drivers/usb/host/pci-quirks.c:1145: warning: Function parameter or member 'pdev' not described in 'quirk_usb_handoff_xhci' Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Martin Mares <mj@ucw.cz> Cc: aleksey_gorelov@phoenix.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-3-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-07Merge tag 'usb-5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY driver updates from Greg KH: "Here are the large set of USB and PHY driver updates for 5.8-rc1. Nothing huge, just lots of little things: - USB gadget fixes and additions all over the place - new PHY drivers - PHY driver fixes and updates - XHCI driver updates - musb driver updates - more USB-serial driver ids added - various USB quirks added - thunderbolt minor updates and fixes - typec updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits) usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs usb: dwc3: meson-g12a: fix error path when fetching the reset line fails Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings" Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180" Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver" USB: serial: ch341: fix lockup of devices with limited prescaler USB: serial: ch341: add basis for quirk detection CDC-ACM: heed quirk also in error handling USB: serial: option: add Telit LE910C1-EUX compositions usb: musb: Fix runtime PM imbalance on error usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle usb: musb: use true for 'use_dma' usb: musb: start session in resume for host port usb: musb: return -ESHUTDOWN in urb when three-strikes error happened USB: serial: qcserial: add DW5816e QDL support thunderbolt: Add trivial .shutdown usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML ...
2020-05-13USB: pci-quirks: Add Raspberry Pi 4 quirkNicolas Saenz Julienne
On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be loaded directly from an EEPROM or, if not present, by the SoC's VideoCore. Inform VideoCore that VL805 was just reset. Also, as this creates a dependency between USB_PCI and VideoCore's firmware interface, and since USB_PCI can't be set as a module neither this can. Reflect that on the firmware interface Kconfg. Link: https://lore.kernel.org/r/20200505161318.26200-5-nsaenzjulienne@suse.de Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
2020-04-23usb: pci-quirks: use true,false for bool variablesJason Yan
Fix the following coccicheck warning: drivers/usb/host/pci-quirks.c:532:1-27: WARNING: Assignment of 0/1 to bool variable drivers/usb/host/pci-quirks.c:208:1-20: WARNING: Assignment of 0/1 to bool variable drivers/usb/host/pci-quirks.c:232:2-21: WARNING: Assignment of 0/1 to bool variable drivers/usb/host/pci-quirks.c:235:2-21: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200420042622.18564-1-yanaijie@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-10-14PCI: Add PCI_STD_NUM_BARS for the number of standard BARsDenis Efremov
Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END. However, that requires the unusual test "i <= PCI_STD_RESOURCE_END" rather than something the typical "i < PCI_STD_NUM_BARS". Add a definition for PCI_STD_NUM_BARS and change loops to use the more idiomatic C style to help avoid fencepost errors. Link: https://lore.kernel.org/r/20190927234026.23342-1-efremov@linux.com Link: https://lore.kernel.org/r/20190927234308.23935-1-efremov@linux.com Link: https://lore.kernel.org/r/20190916204158.6889-3-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sebastian Ott <sebott@linux.ibm.com> # arch/s390/ Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> # video/fbdev/ Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> # pci/controller/dwc/ Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> # scsi/pm8001/ Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi/pm8001/ Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # memstick/
2019-07-25usb: pci-quirks: Minor cleanup for AMD PLL quirkRyan Kennedy
usb_amd_find_chipset_info() is used for chipset detection for several quirks. It is strange that its return value indicates the need for the PLL quirk, which means it is often ignored. This patch adds a function specifically for checking the PLL quirk like the other ones. Additionally, rename probe_result to something more appropriate. Signed-off-by: Ryan Kennedy <ryan5544@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20190704153529.9429-3-ryan5544@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25usb: pci-quirks: Correct AMD PLL quirk detectionRyan Kennedy
The AMD PLL USB quirk is incorrectly enabled on newer Ryzen chipsets. The logic in usb_amd_find_chipset_info currently checks for unaffected chipsets rather than affected ones. This broke once a new chipset was added in e788787ef. It makes more sense to reverse the logic so it won't need to be updated as new chipsets are added. Note that the core of the workaround in usb_amd_quirk_pll does correctly check the chipset. Signed-off-by: Ryan Kennedy <ryan5544@gmail.com> Fixes: e788787ef4f9 ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume") Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20190704153529.9429-2-ryan5544@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10USB: OHCI: Remove USB bus reset delay from OHCI handover codeAlan Stern
Paul pointed out that the 50-ms sleep during OHCI initialization takes up a large fraction of a system's boot time. Things get worse when there are two OHCI controllers present, each requiring 50 ms. However, there really is no need to send a 50-ms reset signal out all the root-hub ports during initialization. The ports themselves will be disabled, and the only way to enable a port is to reset it. Therefore all attached USB devices will receive a proper reset in any case. The controller reset does not need to be long enough to reset those other devices, so the 50-ms delay isn't necessary. Without the delay, there is no remaining incentive for skipping the reset when the controller is already in the RESET state. This patch removes the test, issuing the command unconditionally, and removes the following delay. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Suggested-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-01Revert "xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue"Marc Zyngier
This reverts commit 8466489ef5ba48272ba4fa4ea9f8f403306de4c7. Now that we can properly reset the uPD72020x without a hard PCI reset, let's get rid of the existing quirks. Tested-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Faiz Abbas <faiz_abbas@ti.com> Tested-by: Domenico Andreoli <domenico.andreoli@linux.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-15xhci: workaround for AMD Promontory disabled ports wakeupJoe Lee
For AMD Promontory xHCI host, although you can disable USB ports in BIOS settings, those ports will be enabled anyway after you remove a device on that port and re-plug it in again. It's a known limitation of the chip. As a workaround we can clear the PORT_WAKE_BITS. [commit and code comment rephrasing -Mathias] Signed-off-by: Joe Lee <asmt.swfae@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01usb: host: pci-quirks: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18xhci: Fix sleeping with spin_lock_irq() held in ASmedia 1042A workaroundMathias Nyman
The flow control workaround for ASM1042A xHC hosts sleeps between register polling. The workaround gets called in several places, among them with spin_lock_irq() held when xHC host is resumed or hoplug removed. This was noticed as kernel panics at resume on a Dell XPS15 9550 with TB16 thunderbolt dock. Avoid sleeping with spin_lock_irq() held, use udelay() instead The original workaround was added to 4.9 and 4.12 stable releases, this patch needs to be applied to those as well. Fixes: 9da5a1092b13 ("xhci: Bad Ethernet performance plugged in ASM1042A host") Cc: <stable@vger.kernel.org> #4.9+ Reported-by: Jose Marino <marinoj@nso.edu> Tested-by: Jose Marino <marinoj@nso.edu> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18usb: pci-quirks.c: Corrected timeout values used in handshakeJim Dickerson
Servers were emitting failed handoff messages but were not waiting the full 1 second as designated in section 4.22.1 of the eXtensible Host Controller Interface specifications. The handshake was using wrong units so calls were made with milliseconds not microseconds. Comments referenced 5 seconds not 1 second as in specs. The wrong units were also corrected in a second handshake call. Cc: <stable@vger.kernel.org> Signed-off-by: Jim Dickerson <jim.dickerson@hpe.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28usb:xhci:Fix regression when ATI chipsets detectedSandeep Singh
The following commit cause a regression on ATI chipsets. 'commit e788787ef4f9 ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume")' This causes pinfo->smbus_dev to be wrongly set to NULL on systems with the ATI chipset that this function checks for first. Added conditional check for AMD chipsets to avoid the overwriting pinfo->smbus_dev. Reported-by: Ben Hutchings <ben@decadent.org.uk> Fixes: e788787ef4f9 ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume") cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com> cc: <stable@vger.kernel.org> Signed-off-by: Sandeep Singh <Sandeep.Singh@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-13Merge tag 'usb-4.13-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes and new device ids for 4.13-rc5. There is the usual gadget driver fixes, some new quirks for "messy" hardware, and some new device ids. All have been in linux-next with no reported issues" * tag 'usb-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: pl2303: add new ATEN device id usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter USB: Check for dropped connection before switching to full speed usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume usb: renesas_usbhs: gadget: fix unused-but-set-variable warning usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3 usb: phy: phy-msm-usb: Fix usage of devm_regulator_bulk_get() usb: gadget: udc: renesas_usb3: Fix usb_gadget_giveback_request() calling usb: dwc3: gadget: Correct ISOC DATA PIDs for short packets USB: serial: option: add D-Link DWM-222 device ID usb: musb: fix tx fifo flush handling again usb: core: unlink urbs from the tail of the endpoint's urb_list usb-storage: fix deadlock involving host lock and scsi_done uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069 USB: hcd: Mark secondary HCD as dead if the primary one died USB: serial: cp210x: add support for Qivicon USB ZigBee dongle
2017-08-10usb:xhci:Add quirk for Certain failing HP keyboard on reset after resumeSandeep Singh
Certain HP keyboards would keep inputting a character automatically which is the wake-up key after S3 resume On some AMD platforms USB host fails to respond (by holding resume-K) to USB device (an HP keyboard) resume request within 1ms (TURSM) and ensures that resume is signaled for at least 20 ms (TDRSMDN), which is defined in USB 2.0 spec. The result is that the keyboard is out of function. In SNPS USB design, the host responds to the resume request only after system gets back to S0 and the host gets to functional after the internal HW restore operation that is more than 1 second after the initial resume request from the USB device. As a workaround for specific keyboard ID(HP Keyboards), applying port reset after resume when the keyboard is plugged in. Signed-off-by: Sandeep Singh <Sandeep.Singh@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-02xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issueMarc Zyngier
The Renesas uPD72020x XHCI controller seems to suffer from a really annoying bug, where it may retain some of its DMA programming across a XHCI reset, and despite the driver correctly programming new DMA addresses. This is visible if the device has been using 64-bit DMA addresses, and is then switched to using 32-bit DMA addresses. The top 32 bits of the address (now zero) are ignored are replaced by the 32 bits from the *previous* programming. Sticking with 64-bit DMA always works, but doesn't seem very appropriate. A PCI reset of the device restores the normal functionality, which is done at probe time. Unfortunately, this has to be done before any quirk has been discovered, hence the intrusive nature of the fix. Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> CC: stable@vger.kernel.org # v4.11+
2017-07-20xhci: Bad Ethernet performance plugged in ASM1042A hostJiahau Chang
When USB Ethernet is plugged in ASMEDIA ASM1042A xHCI host, bad performance was manifesting in Web browser use (like download large file such as ISO image). It is known limitation of ASM1042A that is not compatible with driver scheduling, As a workaround we can modify flow control handling of ASM1042A. The register we modify is changes the behavior [use quirk bit 28, usleep_range 40-60us, empty non-pci function -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by: Jiahau Chang <Lars_chang@asmedia.com.tw> Signed-off-by: Ian Pilcher <arequipeno@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-07drivers/usb: Skip auto handoff for TI and RENESAS usb controllersBabu Moger
Never seen XHCI auto handoff working on TI and RENESAS cards. Eventually, we force handoff. This code forces the handoff unconditionally. It saves 5 seconds boot time for each card. Signed-off-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-11treewide: remove redundant #include <linux/kconfig.h>Masahiro Yamada
Kernel source files need not include <linux/kconfig.h> explicitly because the top Makefile forces to include it with: -include $(srctree)/include/linux/kconfig.h This commit removes explicit includes except the following: * arch/s390/include/asm/facilities_src.h * tools/testing/radix-tree/linux/kernel.h These two are used for host programs. Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-14usb: host: pci_quirks: fix memory leak, by adding iounmapSaurabh Sengar
Added iounmap inorder to free memory mapped to pointer before returning Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-01xhci: rework xhci extended capability list parsing functionsMathias Nyman
Replace the existing two extended capability parsing helper functions with one called xhci_find_next_ext_cap(). The extended capabilities are read both in pci-quirks before xhci driver is loaded, and inside the xhci driver when adding ports. The existing helpers did not suit well for these cases and a lot of custom parsing code was needed. The new helper function simplifies these two cases a lot. The motivation for this rework was that code to support xhci debug capability needed to parse extended capabilities, and it included yet another capability parsing helper specific for its needs. With this solution it debug capability code can use this new helper as well Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-31usb: host: pci_quirks: joing string literalsAndy Shevchenko
The patch joins the string literals for happy debugging. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-01-09OHCI: add a quirk for ULi M5237 blocking on resetArseny Solokha
Commit 8dccddbc2368 ("OHCI: final fix for NVIDIA problems (I hope)") introduced into 3.1.9 broke boot on e.g. Freescale P2020DS development board. The code path that was previously specific to NVIDIA controllers had then become taken for all chips. However, the M5237 installed on the board wedges solid when accessing its base+OHCI_FMINTERVAL register, making it impossible to boot any kernel newer than 3.1.8 on this particular and apparently other similar machines. Don't readl() and writel() base+OHCI_FMINTERVAL on PCI ID 10b9:5237. The patch is suitable for the -next tree as well as all maintained kernels up to 3.2 inclusive. Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> # 3.2 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-24USB: PCI-quirks: Deletion of unnecessary checks before the function call ↵Markus Elfring
"pci_dev_put" The pci_dev_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-17USB: EHCI: avoid BIOS handover on the HASEE E200Alan Stern
Leandro Liptak reports that his HASEE E200 computer hangs when we ask the BIOS to hand over control of the EHCI host controller. This definitely sounds like a bug in the BIOS, but at the moment there is no way to fix it. This patch works around the problem by avoiding the handoff whenever the motherboard and BIOS version match those of Leandro's computer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Leandro Liptak <leandroliptak@gmail.com> Tested-by: Leandro Liptak <leandroliptak@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28usb: pci-quirks: Prevent Sony VAIO t-series from switching usb portsMathias Nyman
Sony VAIO t-series machines are not capable of switching usb2 ports over from Intel EHCI to xHCI controller. If tried the USB2 port will be left unconnected and unusable. This patch should be backported to stable kernels as old as 3.12, that contain the commit 26b76798e0507429506b93cd49f8c4cfdab06896 "Intel xhci: refactor EHCI/xHCI port switching" Cc: stable <stable@vger.kernel.org> # 3.12 Reported-by: Jorge <xxopxe@gmail.com> Tested-by: Jorge <xxopxe@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08usb: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-19Merge 3.12-rc6 into usb-next.Greg Kroah-Hartman
We want those USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-09xhci: fix write to USB3_PSSEN and XUSB2PRM pci config registersXenia Ragiadakou
The function pci_write_config_dword() sets the appropriate byteordering internally so the value argument should not be converted to little-endian. This bug was found by sparse. This patch is not suitable for stable. Since cpu_to_lei32 is a no-op on little endian systems, this bug would only affect big endian Intel systems with the EHCI to xHCI port switchover, which are non-existent, AFAIK. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-10-03usb: ohci: use amd_chipset_type to filter for SB800 prefetchHuang Rui
Commit "usb: pci-quirks: refactor AMD quirk to abstract AMD chipset types" introduced a new AMD chipset type to filter AMD platforms with different chipsets. According to a recent thread [1], this patch updates SB800 prefetch routine in AMD PLL quirk. And make it use the new chipset type to represent SB800 generation. [1] http://marc.info/?l=linux-usb&m=138012321616452&w=2 Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-03usb: ehci: use amd_chipset_type to filter for usb subsystem hang bugHuang Rui
Commit "usb: pci-quirks: refactor AMD quirk to abstract AMD chipset types" introduced a new AMD chipset type to filter AMD platforms with different chipsets. According to a recent thread [1], this patch updates USB subsystem hang symptom quirk which is observed on AMD all SB600 and SB700 revision 0x3a/0x3b. And make it use the new chipset type to represent. [1] http://marc.info/?l=linux-usb&m=138012321616452&w=2 Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26usb: pci-quirks: amd_chipset_sb_type_init() can be staticFengguang Wu
Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25usb: core: implement AMD remote wakeup quirkHuang Rui
The following patch is required to resolve remote wake issues with certain devices. Issue description: If the remote wake is issued from the device in a specific timing condition while the system is entering sleep state then it may cause system to auto wake on subsequent sleep cycle. Root cause: Host controller rebroadcasts the Resume signal > 100 µseconds after receiving the original resume event from the device. For proper function, some devices may require the rebroadcast of resume event within the USB spec of 100µS. Workaroud: 1. Filter the AMD platforms with Yangtze chipset, then judge of all the usb devices are mouse or not. And get out the port id which attached a mouse with Pixart controller. 2. Then reset the port which attached issue device during system resume from S3. [Q] Why the special devices are only mice? Would high speed devices such as 3G modem or USB Bluetooth adapter trigger this issue? - Current this sensitivity is only confined to devices that use Pixart controllers. This controller is designed for use with LS mouse devices only. We have not observed any other devices failing. There may be a small risk for other devices also but this patch (reset device in resume phase) will cover the cases if required. [Q] Shouldn’t the resume signal be sent within 100 us for every device? - The Host controller may not send the resume signal within 100us, this our host controller specification change. This is why we require the patch to prevent side effects on certain known devices. [Q] Why would clicking mouse INTENSELY to wake the system up trigger this issue? - This behavior is specific to the devices that use Pixart controller. It is timing dependent on when the resume event is triggered during the sleep state. [Q] Is it a host controller issue or mouse? - It is the host controller behavior during resume that triggers the device incorrect behavior on the next resume. This patch sets USB_QUIRK_RESET_RESUME flag for these Pixart-based mice when they attached to platforms with AMD Yangtze chipset. Signed-off-by: Huang Rui <ray.huang@amd.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25usb: pci-quirks: refactor AMD quirk to abstract AMD chipset typesHuang Rui
This patch abstracts out a AMD chipset type which includes southbridge generation and its revision. When os excutes usb_amd_find_chipset_info routine to initialize AMD chipset type, driver will know which kind of chipset is used. This update has below benifits: - Driver is able to confirm which southbridge generations and their revision are used, with chipset detection once. - To describe chipset generations with enumeration types brings better readability. - It's flexible to filter AMD platforms to implement new quirks in future. Signed-off-by: Huang Rui <ray.huang@amd.com> Cc: Andiry Xu <andiry.xu@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23Intel xhci: refactor EHCI/xHCI port switchingMathias Nyman
Make the Linux xHCI driver automatically try to switchover the EHCI ports to xHCI when an Intel xHCI host is detected, and it also finds an Intel EHCI host. This means we will no longer have to add Intel xHCI hosts to a quirks list when the PCI device IDs change. Simply continuing to add new Intel xHCI PCI device IDs to the quirks list is not sustainable. During suspend ports may be swicthed back to EHCI by BIOS and not properly restored to xHCI at resume. Previously both EHCI and xHCI resume functions switched ports back to XHCI, but it's enough to do it in xHCI only because the hub driver doesn't start running again until after both hosts are resumed. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-05-30USB: OHCI: Generic changes to make ohci-pci a separate driverManjunath Goudar
Note that this changes is part of separating the ohci pci host controller driver from ohci-hcd host code. This contains : -Moved sb800_prefetch() function from ohci-pci.c to pci-quirks.c file and EXPORTed, this is part of the effort to move the ohci pci related code to generic pci code. -Passed "device" argument instead of "ohci_hcd" in sb800_prefetch() function to avoid extra include file in pci-quirks.c. V2: -Passed "device" argment instead of "pci_dev", then we use to_pci_dev() to get the "pci_dev" structure. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-24usb: Prevent dead ports when xhci is not enabledDavid Moore
When the xHCI driver is not available, actively switch the ports to EHCI mode since some BIOSes leave them in xHCI mode where they would otherwise appear dead. This was discovered on a Dell Optiplex 7010, but it's possible other systems could be affected. This should be backported to kernels as old as 3.0, that contain the commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: David Moore <david.moore@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-11-28xhci: Add Lynx Point LP to list of Intel switchable hostsRussell Webb
Like Lynx Point, Lynx Point LP is also switchable. See 1c12443ab8eba71a658fae4572147e56d1f84f66 for more details. This patch should be backported to stable kernels as old as 3.0, that contain commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Russell Webb <russell.webb@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-29 23:14:19 +0000