summaryrefslogtreecommitdiff
path: root/drivers/usb/chipidea/udc.c
AgeCommit message (Collapse)Author
2023-11-22usb: chipidea: udc: Add revision check of 2.20[CI_REVISION_22]Piyush Mehta
Issue: Adding a dTD to a Primed Endpoint May Not Get Recognized with revision 2.20a. There is an issue with the add dTD tripwire semaphore (ATDTW bit in USBCMD register) that can cause the controller to ignore a dTD that is added to a primed endpoint. When this happens, the software can read the tripwire bit and the status bit at '1' even though the endpoint is unprimed. This issue observed with the Windows host machine. Workaround: The software must implement a periodic cycle, and check for each dTD pending on execution (Active = 1), if the endpoint is primed. It can do this by reading the corresponding bits in the ENDPTPRIME and ENDPTSTAT registers. If these bits are read at 0, the software needs to re-prime the endpoint by writing 1 to the corresponding bit in the ENDPTPRIME register. Added conditional revision check of 2.20[CI_REVISION_22] along with 2.40. Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20231102070603.777313-1-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04usb: chipidea: udc: Remove an unnecessary NULL valueRuan Jinjie
The NULL initialization of the pointers assigned by kzalloc() first is not necessary, because if the kzalloc() failed, the pointers will be assigned NULL, otherwise it works as usual. so remove it. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20230804093253.91647-4-ruanjinjie@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-25usb: chipidea: add USB PHY eventXu Yang
Add USB PHY event for below situation: - usb role changed - vbus connect - vbus disconnect - gadget driver is enumerated USB PHY driver can get the last event after above situation occurs and deal with different situations. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20230627110353.1879477-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: udc: add suspend/resume support for device controllerXu Yang
The controller's power may be powered off during system suspend. This will add suspend/resume support when the controller suffers power lost. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20221013151442.3262951-5-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27Merge 5.19-rc4 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-24usb: chipidea: udc: check request status before setting device addressXu Yang
The complete() function may be called even though request is not completed. In this case, it's necessary to check request status so as not to set device address wrongly. Fixes: 10775eb17bee ("usb: chipidea: udc: update gadget states according to ch9") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20220623030242.41796-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-21usb: chipidea: udc: implement get_frameMichael Grzeschik
The chipidea udc core is capable of reading the current frame index from hardware. This patch adds the get_frame callback to the driver. Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220616194459.2981519-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: udc: Fix typo in commenttangmeng
Replace disbale with disable Signed-off-by: tangmeng <tangmeng@uniontech.com> Link: https://lore.kernel.org/r/20220127071619.31812-1-tangmeng@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-10usb: chipidea: udc: make controller hardware endpoint primedPiyush Mehta
Root-cause: There is an issue like endpoint is not recognized as primed, when bus have more pressure and the add dTD tripwire semaphore (ATDTW bit in USBCMD register) that can cause the controller to ignore a dTD that is added to a primed endpoint. This issue observed with the Windows10 host machine. Workaround: The software must implement a periodic cycle, and check for each dTD, if the endpoint is primed. It can do this by reading the corresponding bits in the ENDPTPRIME and ENDPTSTAT registers. If these bits are read at 0, the software needs to re-prime the endpoint by writing 1 to the corresponding bit in the ENDPTPRIME register. Added conditional revision check of 2.20[CI_REVISION_22]. Link: https://lore.kernel.org/linux-usb/SJ0PR02MB8644CBBA848A0F68323F1AA5D4D99@SJ0PR02MB8644.namprd02.prod.outlook.com/ Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com> Link: https://lore.kernel.org/r/20210913140005.955699-1-piyush.mehta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-31Merge 5.13-rc4 into usb-nextGreg Kroah-Hartman
We need the usb/thunderbolt fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: chipidea: udc: Fix incorrectly documented function ↵Lee Jones
'hw_port_is_high_speed()' Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/udc.c:247: warning: expecting prototype for hw_is_port_high_speed(). Prototype was for hw_port_is_high_speed() instead Cc: Peter Chen <peter.chen@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-17-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-17usb: chipidea: udc: assign interrupt number to USB gadget structureLi Jun
Chipidea also need sync interrupt before unbind the udc while gadget remove driver, otherwise setup irq handling may happen while unbind, see below dump generated from android function switch stress test: [ 4703.503056] android_work: sent uevent USB_STATE=CONNECTED [ 4703.514642] android_work: sent uevent USB_STATE=DISCONNECTED [ 4703.651339] android_work: sent uevent USB_STATE=CONNECTED [ 4703.661806] init: Control message: Processed ctl.stop for 'adbd' from pid: 561 (system_server) [ 4703.673469] init: processing action (init.svc.adbd=stopped) from (/system/etc/init/hw/init.usb.configfs.rc:14) [ 4703.676451] Unable to handle kernel read from unreadable memory at virtual address 0000000000000090 [ 4703.676454] Mem abort info: [ 4703.676458] ESR = 0x96000004 [ 4703.676461] EC = 0x25: DABT (current EL), IL = 32 bits [ 4703.676464] SET = 0, FnV = 0 [ 4703.676466] EA = 0, S1PTW = 0 [ 4703.676468] Data abort info: [ 4703.676471] ISV = 0, ISS = 0x00000004 [ 4703.676473] CM = 0, WnR = 0 [ 4703.676478] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004a867000 [ 4703.676481] [0000000000000090] pgd=0000000000000000, p4d=0000000000000000 [ 4703.676503] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 4703.758297] Modules linked in: synaptics_dsx_i2c moal(O) mlan(O) [ 4703.764327] CPU: 0 PID: 235 Comm: lmkd Tainted: G W O 5.10.9-00001-g3f5fd8487c38-dirty #63 [ 4703.773720] Hardware name: NXP i.MX8MNano EVK board (DT) [ 4703.779033] pstate: 60400085 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 4703.785046] pc : _raw_write_unlock_bh+0xc0/0x2c8 [ 4703.789667] lr : android_setup+0x4c/0x168 [ 4703.793676] sp : ffff80001256bd80 [ 4703.796989] x29: ffff80001256bd80 x28: 00000000000000a8 [ 4703.802304] x27: ffff800012470000 x26: ffff80006d923000 [ 4703.807616] x25: ffff800012471000 x24: ffff00000b091140 [ 4703.812929] x23: ffff0000077dbd38 x22: ffff0000077da490 [ 4703.818242] x21: ffff80001256be30 x20: 0000000000000000 [ 4703.823554] x19: 0000000000000080 x18: ffff800012561048 [ 4703.828867] x17: 0000000000000000 x16: 0000000000000039 [ 4703.834180] x15: ffff8000106ad258 x14: ffff80001194c277 [ 4703.839493] x13: 0000000000003934 x12: 0000000000000000 [ 4703.844805] x11: 0000000000000000 x10: 0000000000000001 [ 4703.850117] x9 : 0000000000000000 x8 : 0000000000000090 [ 4703.855429] x7 : 6f72646e61203a70 x6 : ffff8000124f2450 [ 4703.860742] x5 : ffffffffffffffff x4 : 0000000000000009 [ 4703.866054] x3 : ffff8000108a290c x2 : ffff00007fb3a9c8 [ 4703.871367] x1 : 0000000000000000 x0 : 0000000000000090 [ 4703.876681] Call trace: [ 4703.879129] _raw_write_unlock_bh+0xc0/0x2c8 [ 4703.883397] android_setup+0x4c/0x168 [ 4703.887059] udc_irq+0x824/0xa9c [ 4703.890287] ci_irq+0x124/0x148 [ 4703.893429] __handle_irq_event_percpu+0x84/0x268 [ 4703.898131] handle_irq_event+0x64/0x14c [ 4703.902054] handle_fasteoi_irq+0x110/0x210 [ 4703.906236] __handle_domain_irq+0x8c/0xd4 [ 4703.910332] gic_handle_irq+0x6c/0x124 [ 4703.914081] el1_irq+0xdc/0x1c0 [ 4703.917221] _raw_spin_unlock_irq+0x20/0x54 [ 4703.921405] finish_task_switch+0x84/0x224 [ 4703.925502] __schedule+0x4a4/0x734 [ 4703.928990] schedule+0xa0/0xe8 [ 4703.932132] do_notify_resume+0x150/0x184 [ 4703.936140] work_pending+0xc/0x40c [ 4703.939633] Code: d5384613 521b0a69 d5184609 f9800111 (885ffd01) [ 4703.945732] ---[ end trace ba5c1875ae49d53c ]--- [ 4703.950350] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 4703.957223] SMP: stopping secondary CPUs [ 4703.961151] Kernel Offset: disabled [ 4703.964638] CPU features: 0x0240002,2000200c [ 4703.968905] Memory Limit: none [ 4703.971963] Rebooting in 5 seconds.. Tested-by: faqiang.zhu <faqiang.zhu@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1620989984-7653-1-git-send-email-jun.li@nxp.com Signed-off-by: Peter Chen <peter.chen@kernel.org>
2020-12-10usb: chipidea: add tracepoint support for udcPeter Chen
Add basic tracepoint support for udc driver. Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-07-29Merge tag 'usb-ci-v5.9-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: ENDIAN issue fix and one query controller role API is introduced. * tag 'usb-ci-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: chipidea: imx: get available runtime dr mode for wakeup setting usb: chipidea: add query_available_role interface Documentation: ABI: usb: chipidea: Update Li Jun's e-mail usb: chipidea: udc: fix the ENDIAN issue
2020-07-09usb: chipidea: udc: Fix a few kerneldoc issuesLee Jones
Descriptions were missing for 'ci' almost throughout. There was one instance of over-documenting. Finally one function argument was incorrectly documented (probably down to bitrot). Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/udc.c:245: warning: Function parameter or member 'ci' not described in 'hw_port_is_high_speed' drivers/usb/chipidea/udc.c:271: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_intr_active' drivers/usb/chipidea/udc.c:285: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_setup_guard' drivers/usb/chipidea/udc.c:296: warning: Function parameter or member 'ci' not described in 'hw_test_and_set_setup_guard' drivers/usb/chipidea/udc.c:321: warning: Function parameter or member 'ci' not described in 'hw_usb_reset' drivers/usb/chipidea/udc.c:628: warning: Excess function parameter 'ci' description in 'free_pending_td' drivers/usb/chipidea/udc.c:655: warning: Function parameter or member 'hwep' not described in '_hardware_dequeue' drivers/usb/chipidea/udc.c:655: warning: Excess function parameter 'gadget' description in '_hardware_dequeue' Cc: Peter Chen <Peter.Chen@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-18-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: chipidea: udc: Help out kerneldoc headers that have tried, demote the ↵Lee Jones
others Help with adding the odd description where they have been omitted or where the format isn't quite right. Demote all function headers which are lacking any attempt of describing their arguments. Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/udc.c:645: warning: Function parameter or member 'hwreq' not described in '_hardware_dequeue' drivers/usb/chipidea/udc.c:645: warning: Excess function parameter 'gadget' description in '_hardware_dequeue' drivers/usb/chipidea/udc.c:1326: warning: Function parameter or member 'ep' not described in 'ep_enable' drivers/usb/chipidea/udc.c:1326: warning: Function parameter or member 'desc' not described in 'ep_enable' drivers/usb/chipidea/udc.c:1393: warning: Function parameter or member 'ep' not described in 'ep_disable' drivers/usb/chipidea/udc.c:1433: warning: Function parameter or member 'ep' not described in 'ep_alloc_request' drivers/usb/chipidea/udc.c:1433: warning: Function parameter or member 'gfp_flags' not described in 'ep_alloc_request' drivers/usb/chipidea/udc.c:1454: warning: Function parameter or member 'ep' not described in 'ep_free_request' drivers/usb/chipidea/udc.c:1454: warning: Function parameter or member 'req' not described in 'ep_free_request' drivers/usb/chipidea/udc.c:1488: warning: Function parameter or member 'ep' not described in 'ep_queue' drivers/usb/chipidea/udc.c:1488: warning: Function parameter or member 'req' not described in 'ep_queue' drivers/usb/chipidea/udc.c:1488: warning: Function parameter or member 'gfp_flags' not described in 'ep_queue' drivers/usb/chipidea/udc.c:1512: warning: Function parameter or member 'ep' not described in 'ep_dequeue' drivers/usb/chipidea/udc.c:1512: warning: Function parameter or member 'req' not described in 'ep_dequeue' drivers/usb/chipidea/udc.c:1556: warning: Function parameter or member 'ep' not described in 'ep_set_halt' drivers/usb/chipidea/udc.c:1556: warning: Function parameter or member 'value' not described in 'ep_set_halt' drivers/usb/chipidea/udc.c:1566: warning: Function parameter or member 'ep' not described in 'ep_set_wedge' drivers/usb/chipidea/udc.c:1586: warning: Function parameter or member 'ep' not described in 'ep_fifo_flush' drivers/usb/chipidea/udc.c:1610: warning: cannot understand function prototype: 'const struct usb_ep_ops usb_ep_ops = ' drivers/usb/chipidea/udc.c:1629: warning: Function parameter or member '_gadget' not described in 'ci_hdrc_gadget_connect' drivers/usb/chipidea/udc.c:1629: warning: Function parameter or member 'is_active' not described in 'ci_hdrc_gadget_connect' drivers/usb/chipidea/udc.c:1780: warning: cannot understand function prototype: 'const struct usb_gadget_ops usb_gadget_ops = ' drivers/usb/chipidea/udc.c:1931: warning: Function parameter or member 'gadget' not described in 'ci_udc_stop' drivers/usb/chipidea/udc.c:1965: warning: Function parameter or member 'ci' not described in 'udc_irq' drivers/usb/chipidea/udc.c:2095: warning: Function parameter or member 'ci' not described in 'ci_hdrc_gadget_destroy' drivers/usb/chipidea/udc.c:2144: warning: Function parameter or member 'ci' not described in 'ci_hdrc_gadget_init' Cc: Peter Chen <Peter.Chen@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-13-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: chipidea: udc: Add missing descriptions for function arg 'ci'Lee Jones
Looks like a very popular argument to omit descriptions for. Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/udc.c:80: warning: Function parameter or member 'ci' not described in 'hw_device_state' drivers/usb/chipidea/udc.c:100: warning: Function parameter or member 'ci' not described in 'hw_ep_flush' drivers/usb/chipidea/udc.c:121: warning: Function parameter or member 'ci' not described in 'hw_ep_disable' drivers/usb/chipidea/udc.c:136: warning: Function parameter or member 'ci' not described in 'hw_ep_enable' drivers/usb/chipidea/udc.c:170: warning: Function parameter or member 'ci' not described in 'hw_ep_get_halt' drivers/usb/chipidea/udc.c:185: warning: Function parameter or member 'ci' not described in 'hw_ep_prime' drivers/usb/chipidea/udc.c:215: warning: Function parameter or member 'ci' not described in 'hw_ep_set_halt' drivers/usb/chipidea/udc.c:238: warning: Function parameter or member 'ci' not described in 'hw_port_is_high_speed' drivers/usb/chipidea/udc.c:251: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_complete' drivers/usb/chipidea/udc.c:263: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_intr_active' drivers/usb/chipidea/udc.c:277: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_setup_guard' drivers/usb/chipidea/udc.c:288: warning: Function parameter or member 'ci' not described in 'hw_test_and_set_setup_guard' drivers/usb/chipidea/udc.c:300: warning: Function parameter or member 'ci' not described in 'hw_usb_set_address' drivers/usb/chipidea/udc.c:312: warning: Function parameter or member 'ci' not described in 'hw_usb_reset' Cc: Peter Chen <Peter.Chen@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-12-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24USB: ch9: add "USB_" prefix in front of TEST definesGreg Kroah-Hartman
For some reason, the TEST_ defines in the usb/ch9.h files did not have the USB_ prefix on it, making it a bit confusing when reading the file, as well as not the nicest thing to do in a uapi file. So fix that up and add the USB_ prefix on to them, and fix up all in-kernel usages. This included deleting the duplicate copy in the net2272.h file. Cc: Felipe Balbi <balbi@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Pawel Laszczak <pawell@cadence.com> Cc: YueHaibing <yuehaibing@huawei.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Jason Yan <yanaijie@huawei.com> Cc: Jia-Ju Bai <baijiaju1990@gmail.com> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jules Irenge <jbi.octave@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Cc: Rob Gill <rrobgill@protonmail.com> Cc: Macpaul Lin <macpaul.lin@mediatek.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Bin Liu <b-liu@ti.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Acked-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200618144206.2655890-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-10usb: chipidea: udc: fix the ENDIAN issuePeter Chen
Fix the ENDIAN issue when assign dTD entry. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-05-06usb: chipidea: udc: add software sg list supportPeter Chen
The chipidea controller doesn't support short transfer for sg list, so we still keep setting IOC per TD, otherwise, there will be no interrupt for short transfer. Each TD has five entries for data buffer, each data buffer could be non-countinuous 4KB buffer, so it could handle up to 5 sg buffers one time. The benefit of this patch is avoiding OOM for low memory system(eg, 256MB) during large USB transfers, see below for detail. The non-sg handling has not changed. ufb: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 2 PID: 370 Comm: ufb Not tainted 5.4.3-1.1.0+g54b3750d61fd #1 Hardware name: NXP i.MX8MNano DDR4 EVK board (DT) Call trace: dump_backtrace+0x0/0x140 show_stack+0x14/0x20 dump_stack+0xb4/0xf8 warn_alloc+0xec/0x158 __alloc_pages_slowpath+0x9cc/0x9f8 __alloc_pages_nodemask+0x21c/0x280 alloc_pages_current+0x7c/0xe8 kmalloc_order+0x1c/0x88 __kmalloc+0x25c/0x298 ffs_epfile_io.isra.0+0x20c/0x7d0 ffs_epfile_read_iter+0xa8/0x188 new_sync_read+0xe4/0x170 __vfs_read+0x2c/0x40 vfs_read+0xc8/0x1a0 ksys_read+0x68/0xf0 __arm64_sys_read+0x18/0x20 el0_svc_common.constprop.0+0x68/0x160 el0_svc_handler+0x20/0x80 el0_svc+0x8/0xc Mem-Info: active_anon:2856 inactive_anon:5269 isolated_anon:12 active_file:5238 inactive_file:18803 isolated_file:0 unevictable:0 dirty:22 writeback:416 unstable:0 slab_reclaimable:4073 slab_unreclaimable:3408 mapped:727 shmem:7393 pagetables:37 bounce:0 free:4104 free_pcp:118 free_cma:0 Node 0 active_anon:11436kB inactive_anon:21076kB active_file:20988kB inactive_file:75216kB unevictable:0kB isolated(ano Node 0 DMA32 free:16820kB min:1808kB low:2260kB high:2712kB active_anon:11436kB inactive_anon:21076kB active_file:2098B lowmem_reserve[]: 0 0 0 Node 0 DMA32: 508*4kB (UME) 242*8kB (UME) 730*16kB (UM) 21*32kB (UME) 5*64kB (UME) 2*128kB (M) 0*256kB 0*512kB 0*1024kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=32768kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=64kB 31455 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 0kB Total swap = 0kB 65536 pages RAM 0 pages HighMem/MovableOnly 10766 pages reserved 0 pages cma reserved 0 pages hwpoisoned Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-05-06usb: chipidea: introduce CI_HDRC_CONTROLLER_VBUS_EVENT glue layer usePeter Chen
Some vendors glue layer need to handle some events for vbus, eg, some i.mx platforms (imx7d, imx8mm, imx8mn, etc) needs vbus event to handle charger detection, its charger detection is finished at glue layer code, but not at USB PHY driver. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-03-23Merge 5.6-rc7 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: chipidea: udc: fix sleeping function called from invalid contextPeter Chen
The code calls pm_runtime_get_sync with irq disabled, it causes below warning: BUG: sleeping function called from invalid context at wer/runtime.c:1075 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: er/u8:1 CPU: 1 PID: 37 Comm: kworker/u8:1 Not tainted 20200304-00181-gbebfd2a5be98 #1588 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: ci_otg ci_otg_work [<c010e8bd>] (unwind_backtrace) from [<c010a315>] 1/0x14) [<c010a315>] (show_stack) from [<c0987d29>] 5/0x94) [<c0987d29>] (dump_stack) from [<c013e77f>] +0xeb/0x118) [<c013e77f>] (___might_sleep) from [<c052fa1d>] esume+0x75/0x78) [<c052fa1d>] (__pm_runtime_resume) from [<c0627a33>] 0x23/0x74) [<c0627a33>] (ci_udc_pullup) from [<c062fb93>] nect+0x2b/0xcc) [<c062fb93>] (usb_gadget_connect) from [<c062769d>] _connect+0x59/0x104) [<c062769d>] (ci_hdrc_gadget_connect) from [<c062778b>] ssion+0x43/0x48) [<c062778b>] (ci_udc_vbus_session) from [<c062f997>] s_connect+0x17/0x9c) [<c062f997>] (usb_gadget_vbus_connect) from [<c062634d>] bd/0x128) [<c062634d>] (ci_otg_work) from [<c0134719>] rk+0x149/0x404) [<c0134719>] (process_one_work) from [<c0134acb>] 0xf7/0x3bc) [<c0134acb>] (worker_thread) from [<c0139433>] x118) [<c0139433>] (kthread) from [<c01010bd>] (ret_from_fork+0x11/0x34) Tested-by: Dmitry Osipenko <digetx@gmail.com> Cc: <stable@vger.kernel.org> #v5.5 Fixes: 72dc8df7920f ("usb: chipidea: udc: protect usb interrupt enable") Reported-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200316031034.17847-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-16usb: chipidea: udc: using structure ci_hdrc device for runtime PMPeter Chen
At current code, it doesn't maintain ci->gadget.dev's runtime PM status well, eg, during the PM operation, the PM counter for ci->gadget.dev doesn't be changed accordingly. In this commit, we use ci_hdrc device instead of ci->gadget.dev for runtime PM APIs at udc driver, in the way, we handle runtime PM APIs using unify device structure between core and udc driver. Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2019-11-18usb: chipidea: udc: protect usb interrupt enableJun Li
We hit the problem with below sequence: - ci_udc_vbus_session() update vbus_active flag and ci->driver is valid, - before calling the ci_hdrc_gadget_connect(), usb_gadget_udc_stop() is called by application remove gadget driver, - ci_udc_vbus_session() will contine do ci_hdrc_gadget_connect() as gadget_ready is 1, so udc interrupt is enabled, but ci->driver is NULL. - USB connection irq generated but ci->driver is NULL. As udc irq only should be enabled when gadget driver is binded, so add spinlock to protect the usb irq enable for vbus session handling. Signed-off-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2019-11-18usb: chipidea: udc: add new API ci_hdrc_gadget_connectPeter Chen
This API is used enable device function, it is called at below situations: - VBUS is connected during boots up - Hot plug occurs during runtime Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Jun Li <jun.li@nxp.com>
2019-11-04usb: Spelling s/disconnet/disconnect/Geert Uytterhoeven
Fix misspellings of "disconnect". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20191024152747.30617-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-02Merge 5.3-rc7 into usb-nextGreg Kroah-Hartman
We need the usb fixes in here for testing Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-21usb: chipidea: udc: don't do hardware access if gadget has stoppedPeter Chen
After _gadget_stop_activity is executed, we can consider the hardware operation for gadget has finished, and the udc can be stopped and enter low power mode. So, any later hardware operations (from usb_ep_ops APIs or usb_gadget_ops APIs) should be considered invalid, any deinitializatons has been covered at _gadget_stop_activity. I meet this problem when I plug out usb cable from PC using mass_storage gadget, my callstack like: vbus interrupt->.vbus_session-> composite_disconnect ->pm_runtime_put_sync(&_gadget->dev), the composite_disconnect will call fsg_disable, but fsg_disable calls usb_ep_disable using async way, there are register accesses for usb_ep_disable. So sometimes, I get system hang due to visit register without clock, sometimes not. The Linux Kernel USB maintainer Alan Stern suggests this kinds of solution. See: http://marc.info/?l=linux-usb&m=138541769810983&w=2. Cc: <stable@vger.kernel.org> #v4.9+ Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20190820020503.27080-2-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25usb: chipidea: udc: remove redundant assignment to variable retvalColin Ian King
The variable retval is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Also remove a blank line. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190704150341.759-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-17usb: chipidea: udc: workaround for endpoint conflict issuePeter Chen
An endpoint conflict occurs when the USB is working in device mode during an isochronous communication. When the endpointA IN direction is an isochronous IN endpoint, and the host sends an IN token to endpointA on another device, then the OUT transaction may be missed regardless the OUT endpoint number. Generally, this occurs when the device is connected to the host through a hub and other devices are connected to the same hub. The affected OUT endpoint can be either control, bulk, isochronous, or an interrupt endpoint. After the OUT endpoint is primed, if an IN token to the same endpoint number on another device is received, then the OUT endpoint may be unprimed (cannot be detected by software), which causes this endpoint to no longer respond to the host OUT token, and thus, no corresponding interrupt occurs. There is no good workaround for this issue, the only thing the software could do is numbering isochronous IN from the highest endpoint since we have observed most of device number endpoint from the lowest. Cc: <stable@vger.kernel.org> #v3.14+ Cc: Fabio Estevam <festevam@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: chipidea: Add dynamic pinctrl selectionLoic Poulain
Some hardware implementations require to configure pins differently according to the USB role (host/device), this can be an update of the pins routing or a simple GPIO value change. This patch introduces new optional "host" and "device" pinctrls. If these pinctrls are defined by the device, they are respectively selected on host/device role start. If a default pinctrl exist, it is restored on host/device role stop. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-11-07USB: chipidea: Remove redundant license textGreg Kroah-Hartman
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-21usb: chipidea: do charger detection in vbus sessionLi Jun
In case the usb phy has the capability to detect usb charger type, do it when vbus is on. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-08-24usb: chipidea: udc: Support SKB alignment quirkDmitry Osipenko
NVIDIA Tegra20 UDC can't cope with unaligned DMA and require a USB gadget quirk that avoids SKB buffer alignment to be set in order to make Ethernet Gadget working. Later Tegra generations do not require that quirk. Let's add a new platform data flag that allows to enable USB gadget quirk for platforms that require it. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-07-19usb: chipidea: udc: compress return logic into lineGustavo A. R. Silva
Simplify return logic to avoid unnecessary variable assignment. This issue was detected using Coccinelle and the following semantic patch: @@ local idexpression ret; expression e; @@ -ret = +return e; -return ret; Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-05-18usb: chipidea: udc: fix NULL pointer dereference if udc_start failedJisheng Zhang
Fix below NULL pointer dereference. we set ci->roles[CI_ROLE_GADGET] too early in ci_hdrc_gadget_init(), if udc_start() fails due to some reason, the ci->roles[CI_ROLE_GADGET] check in ci_hdrc_gadget_destroy can't protect us. We fix this issue by only setting ci->roles[CI_ROLE_GADGET] if udc_start() succeed. [ 1.398550] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 1.448600] PC is at dma_pool_free+0xb8/0xf0 [ 1.453012] LR is at dma_pool_free+0x28/0xf0 [ 2.113369] [<ffffff80081817d8>] dma_pool_free+0xb8/0xf0 [ 2.118857] [<ffffff800841209c>] destroy_eps+0x4c/0x68 [ 2.124165] [<ffffff8008413770>] ci_hdrc_gadget_destroy+0x28/0x50 [ 2.130461] [<ffffff800840fa30>] ci_hdrc_probe+0x588/0x7e8 [ 2.136129] [<ffffff8008380fb8>] platform_drv_probe+0x50/0xb8 [ 2.142066] [<ffffff800837f494>] driver_probe_device+0x1fc/0x2a8 [ 2.148270] [<ffffff800837f68c>] __device_attach_driver+0x9c/0xf8 [ 2.154563] [<ffffff800837d570>] bus_for_each_drv+0x58/0x98 [ 2.160317] [<ffffff800837f174>] __device_attach+0xc4/0x138 [ 2.166072] [<ffffff800837f738>] device_initial_probe+0x10/0x18 [ 2.172185] [<ffffff800837e58c>] bus_probe_device+0x94/0xa0 [ 2.177940] [<ffffff800837c560>] device_add+0x3f0/0x560 [ 2.183337] [<ffffff8008380d20>] platform_device_add+0x180/0x240 [ 2.189541] [<ffffff800840f0e8>] ci_hdrc_add_device+0x440/0x4f8 [ 2.195654] [<ffffff8008414194>] ci_hdrc_usb2_probe+0x13c/0x2d8 [ 2.201769] [<ffffff8008380fb8>] platform_drv_probe+0x50/0xb8 [ 2.207705] [<ffffff800837f494>] driver_probe_device+0x1fc/0x2a8 [ 2.213910] [<ffffff800837f5ec>] __driver_attach+0xac/0xb0 [ 2.219575] [<ffffff800837d4b0>] bus_for_each_dev+0x60/0xa0 [ 2.225329] [<ffffff800837ec80>] driver_attach+0x20/0x28 [ 2.230816] [<ffffff800837e880>] bus_add_driver+0x1d0/0x238 [ 2.236571] [<ffffff800837fdb0>] driver_register+0x60/0xf8 [ 2.242237] [<ffffff8008380ef4>] __platform_driver_register+0x44/0x50 [ 2.248891] [<ffffff80086fd440>] ci_hdrc_usb2_driver_init+0x18/0x20 [ 2.255365] [<ffffff8008082950>] do_one_initcall+0x38/0x128 [ 2.261121] [<ffffff80086e0d00>] kernel_init_freeable+0x1ac/0x250 [ 2.267414] [<ffffff800852f0b8>] kernel_init+0x10/0x100 [ 2.272810] [<ffffff8008082680>] ret_from_fork+0x10/0x50 Cc: stable <stable@vger.kernel.org> Fixes: 3f124d233e97 ("usb: chipidea: add role init and destroy APIs") Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-04-18Merge tag 'usb-ci-v4.12-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: Two changes for this v4.12-rc1: - Add sysfs entry for role switch - Update gadget state after gadget back from suspend
2017-04-14usb: chipidea: core: add sysfs groupPeter Chen
Sometimes, the user needs to adjust some properties for controllers, eg the role for controller, we add sysfs group for them. The attribute 'role' is used to switch host/gadget role dynamically, the uewr can read the current role, and write the other role compare to current one to finish the switch. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-03-23usb: chipidea: use bus->sysdev for DMA configurationArnd Bergmann
Set the dma for chipidea from sysdev. This is inherited from its parent node. Also, do not set dma mask for child as it is not required now. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-15usb: chipidea: udc: update gadget state after bus resumeLi Jun
Gadget state is set to be suspended when bus suspened, but not updated after resume, this patch saves the gadget state before suspend and restores it after resume. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: Drop lock across event_notify during gadget stopStephen Boyd
The CI_HDRC_CONTROLLER_STOPPED_EVENT may want to call sleeping APIs similar to how _gadget_stop_activity() may. Let's drop the lock across the event so that glue drivers can make sleeping calls. Cc: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: Remove locking in ci_udc_start()Stephen Boyd
We don't call hw_device_reset() with the ci->lock held, so it doesn't seem like this lock here is protecting anything. Let's just remove it. This allows us to call sleeping functions like phy_init() from within the CI_HDRC_CONTROLLER_RESET_EVENT hook. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-11-28Merge tag 'usb-ci-v4.10-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: - Adding ULPI PHY support for imx53 - Properly mark little endian descriptors for udc
2016-11-28Merge 4.9-rc7 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-15usb: chipidea: move the lock initialization to core filePeter Chen
This can fix below dump when the lock is accessed at host mode due to it is not initialized. [ 46.119638] INFO: trying to register non-static key. [ 46.124643] the code is fine but needs lockdep annotation. [ 46.130144] turning off the locking correctness validator. [ 46.135659] CPU: 0 PID: 690 Comm: cat Not tainted 4.9.0-rc3-00079-g4b75f1d #1210 [ 46.143075] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 46.148923] Backtrace: [ 46.151448] [<c010c460>] (dump_backtrace) from [<c010c658>] (show_stack+0x18/0x1c) [ 46.159038] r7:edf52000 [ 46.161412] r6:60000193 [ 46.163967] r5:00000000 [ 46.165035] r4:c0e25c2c [ 46.169109] [<c010c640>] (show_stack) from [<c03f58a4>] (dump_stack+0xb4/0xe8) [ 46.176362] [<c03f57f0>] (dump_stack) from [<c016d690>] (register_lock_class+0x4fc/0x56c) [ 46.184554] r10:c0e25d24 [ 46.187014] r9:edf53e70 [ 46.189569] r8:c1642444 [ 46.190637] r7:ee9da024 [ 46.193191] r6:00000000 [ 46.194258] r5:00000000 [ 46.196812] r4:00000000 [ 46.199185] r3:00000001 [ 46.203259] [<c016d194>] (register_lock_class) from [<c0171294>] (__lock_acquire+0x80/0x10f0) [ 46.211797] r10:c0e25d24 [ 46.214257] r9:edf53e70 [ 46.216813] r8:ee9da024 [ 46.217880] r7:c1642444 [ 46.220435] r6:edcd1800 [ 46.221502] r5:60000193 [ 46.224057] r4:00000000 [ 46.227953] [<c0171214>] (__lock_acquire) from [<c01726c0>] (lock_acquire+0x74/0x94) [ 46.235710] r10:00000001 [ 46.238169] r9:edf53e70 [ 46.240723] r8:edf53f80 [ 46.241790] r7:00000001 [ 46.244344] r6:00000001 [ 46.245412] r5:60000193 [ 46.247966] r4:00000000 [ 46.251866] [<c017264c>] (lock_acquire) from [<c096c8fc>] (_raw_spin_lock_irqsave+0x40/0x54) [ 46.260319] r7:ee1c6a00 [ 46.262691] r6:c062a570 [ 46.265247] r5:20000113 [ 46.266314] r4:ee9da014 [ 46.270393] [<c096c8bc>] (_raw_spin_lock_irqsave) from [<c062a570>] (ci_port_test_show+0x2c/0x70) [ 46.279280] r6:eebd2000 [ 46.281652] r5:ee9da010 [ 46.284207] r4:ee9da014 [ 46.286810] [<c062a544>] (ci_port_test_show) from [<c0248d04>] (seq_read+0x1ac/0x4f8) [ 46.294655] r9:edf53e70 [ 46.297028] r8:edf53f80 [ 46.299583] r7:ee1c6a00 [ 46.300650] r6:00000001 [ 46.303205] r5:00000000 [ 46.304273] r4:eebd2000 [ 46.306850] [<c0248b58>] (seq_read) from [<c039e864>] (full_proxy_read+0x54/0x6c) [ 46.314348] r10:00000000 [ 46.316808] r9:c0a6ad30 [ 46.319363] r8:edf53f80 [ 46.320430] r7:00020000 [ 46.322986] r6:b6de3000 [ 46.324053] r5:ee1c6a00 [ 46.326607] r4:c0248b58 [ 46.330505] [<c039e810>] (full_proxy_read) from [<c021ec98>] (__vfs_read+0x34/0x118) [ 46.338262] r9:edf52000 [ 46.340635] r8:c0107fc4 [ 46.343190] r7:00020000 [ 46.344257] r6:edf53f80 [ 46.346812] r5:c039e810 [ 46.347879] r4:ee1c6a00 [ 46.350447] [<c021ec64>] (__vfs_read) from [<c021fbd0>] (vfs_read+0x8c/0x11c) [ 46.357597] r9:edf52000 [ 46.359969] r8:c0107fc4 [ 46.362524] r7:edf53f80 [ 46.363592] r6:b6de3000 [ 46.366147] r5:ee1c6a00 [ 46.367214] r4:00020000 [ 46.369782] [<c021fb44>] (vfs_read) from [<c0220a4c>] (SyS_read+0x4c/0xa8) [ 46.376672] r8:c0107fc4 [ 46.379045] r7:00020000 [ 46.381600] r6:b6de3000 [ 46.382667] r5:ee1c6a00 [ 46.385222] r4:ee1c6a00 [ 46.387817] [<c0220a00>] (SyS_read) from [<c0107e20>] (ret_fast_syscall+0x0/0x1c) [ 46.395314] r7:00000003 [ 46.397687] r6:b6de3000 [ 46.400243] r5:00020000 [ 46.401310] r4:00020000 Cc: <stable@vger.kernel.org> Fixes: 26c696c678c4 ("USB: Chipidea: rename struct ci13xxx variables from udc to ci") Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14usb: chipidea: Properly mark little endian descriptorsStephen Boyd
The DMA descriptors are little endian, and we do a pretty good job of handling them with the proper le32_to_cpu() markings, but we don't actually mark them as __le32. This means checkers like sparse can't easily find new bugs. Let's mark the members of structures properly and fix the few places where we're missing conversions. Cc: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-11-03usb: chipidea: udc: remove unnecessary & operationFelipe Balbi
Now that usb_endpoint_maxp() only returns the lowest 11 bits from wMaxPacketSize, we can remove the & operation from this driver. Cc: Peter Chen <Peter.Chen@nxp.com> Cc: <linux-usb@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-03usb: chipidea: udc: make use of new usb_endpoint_maxp_mult()Felipe Balbi
We have introduced a helper to calculate multiplier value from wMaxPacketSize. Start using it. Acked-by: Peter Chen <Peter.Chen@nxp.com> Cc: <linux-usb@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-29 11:25:23 +0000