summaryrefslogtreecommitdiff
path: root/drivers/usb/cdns3/ep0.c
AgeCommit message (Collapse)Author
2020-12-29usb: cdns3: Change file names for cdns3 driver.Pawel Laszczak
Patch adds prefix cdns3- to all file names related only to cdns3 driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-10-30usb: cdns3: Fix on-chip memory overflow issuePawel Laszczak
Patch fixes issue caused setting On-chip memory overflow bit in usb_sts register. The issue occurred because EP_CFG register was set twice before USB_STS.CFGSTS was set. Every write operation on EP_CFG.BUFFERING causes that controller increases internal counter holding the number of reserved on-chip buffers. First time this register was updated in function cdns3_ep_config before delegating SET_CONFIGURATION request to class driver and again it was updated when class wanted to enable endpoint. This patch fixes this issue by configuring endpoints enabled by class driver in cdns3_gadget_ep_enable and others just before status stage. Cc: stable@vger.kernel.org#v5.8+ Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reported-and-tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-10-02usb: cdns3: gadget: move wait configuration operationPeter Chen
After commit f4cfe5ce607d ("usb: cdns3: gadget: improve the set_configuration handling"), the software will inform the hardware the request has finished at cdns3_ep0_complete_setup. The configuration set bit is only set after request has finished, so it needs to move waiting operation after that. Meanwhile, if it is timeout, it will show warning message and return error. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: cdns3: ep0: delete the unnecessary operationPeter Chen
It doesn't need to enable/disable L1 on the fly for EP0 transfer, we only need to enable L1 after SET_CONFIGURATION. This code may be introduced by careless. Cc: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-24usb: cdns3: gadget: improve the set_configuration handlingPeter Chen
- Delete the duplicated EP_CMD_ERDY and EP_CMD_REQ_CMPL setting - Prepare the next setup before setting EP_CMD_ERDY and EP_CMD_REQ_CMPL, it could avoid a bug that DMA hang at EP0 OUT for DEV_VER_NXP_V1 - Delete the duplicated cdns3_set_hw_configuration calling at cdns3_req_ep0_set_configuration, the composite.c will handle this request, and call .ep0_queue back, and at .ep_queue it will call cdns3_set_hw_configuration. - Move cdns3_allow_enable_l1 into cdns3_set_hw_configuration since it is part of this function. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-20Merge 5.8-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: cdns3: ep0: fix some endian issuesPeter Chen
It is found by sparse. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-03usb: cdns3: ep0: Move 'zlp' description to appropriate function headerLee Jones
'zlp' was documented, but in the wrong place. Fixes the following W=1 kernel build warning(s): drivers/usb/cdns3/ep0.c:36: warning: Function parameter or member 'zlp' not described in 'cdns3_ep0_run_transfer' drivers/usb/cdns3/ep0.c:705: warning: Excess function parameter 'zlp' description in 'cdns3_gadget_ep0_queue' Cc: Pawel Laszczak <pawell@cadence.com> Cc: Pawel Jez <pjez@cadence.com> Cc: Peter Chen <peter.chen@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-23-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: cdns3: ep0: Fix a bunch of kerneldoc issuesLee Jones
Add some missing function argument descriptions for 'ep', 'desc' and 'zlp', and correct spelling/bitrot issues surrounding the correct spelling of present args. Fixes the following W=1 warnings: drivers/usb/cdns3/ep0.c:36: warning: Function parameter or member 'zlp' not described in 'cdns3_ep0_run_transfer' drivers/usb/cdns3/ep0.c:236: warning: Function parameter or member 'ctrl' not described in 'cdns3_req_ep0_get_status' drivers/usb/cdns3/ep0.c:236: warning: Excess function parameter 'ctrl_req' description in 'cdns3_req_ep0_get_status' drivers/usb/cdns3/ep0.c:411: warning: Function parameter or member 'ctrl' not described in 'cdns3_req_ep0_handle_feature' drivers/usb/cdns3/ep0.c:411: warning: Excess function parameter 'ctrl_req' description in 'cdns3_req_ep0_handle_feature' drivers/usb/cdns3/ep0.c:661: warning: Function parameter or member 'ep' not described in 'cdns3_gadget_ep0_enable' drivers/usb/cdns3/ep0.c:661: warning: Function parameter or member 'desc' not described in 'cdns3_gadget_ep0_enable' drivers/usb/cdns3/ep0.c:671: warning: Function parameter or member 'ep' not described in 'cdns3_gadget_ep0_disable' drivers/usb/cdns3/ep0.c:867: warning: Function parameter or member 'priv_ep' not described in 'cdns3_init_ep0' drivers/usb/cdns3/ep0.c:867: warning: Excess function parameter 'ep_priv' description in 'cdns3_init_ep0' Cc: Pawel Laszczak <pawell@cadence.com> Cc: Pawel Jez <pjez@cadence.com> Cc: Peter Chen <peter.chen@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-15-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-01usb: cdns3: ep0: delete the duplicate codePeter Chen
The value '0' is duplicated with USB_DIR_OUT Signed-off-by: Peter Chen <peter.chen@nxp.com> Acked-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20200623031001.8469-2-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29Merge 5.8-rc3 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here, and this resolves a merge issue found in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24usb: cdns3: ep0: add spinlock for cdns3_check_new_setupPeter Chen
The other thread may access other endpoints when the cdns3_check_new_setup is handling, add spinlock to protect it. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: <stable@vger.kernel.org> Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200623030918.8409-4-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24usb: cdns3: ep0: fix the test mode set incorrectlyPeter Chen
The 'tmode' is ctrl->wIndex, changing it as the real test mode value for register assignment. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: <stable@vger.kernel.org> Reviewed-by: Jun Li <jun.li@nxp.com> Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200623030918.8409-2-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24USB: ch9: add "USB_" prefix in front of TEST definesGreg Kroah-Hartman
For some reason, the TEST_ defines in the usb/ch9.h files did not have the USB_ prefix on it, making it a bit confusing when reading the file, as well as not the nicest thing to do in a uapi file. So fix that up and add the USB_ prefix on to them, and fix up all in-kernel usages. This included deleting the duplicate copy in the net2272.h file. Cc: Felipe Balbi <balbi@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Pawel Laszczak <pawell@cadence.com> Cc: YueHaibing <yuehaibing@huawei.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Jason Yan <yanaijie@huawei.com> Cc: Jia-Ju Bai <baijiaju1990@gmail.com> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jules Irenge <jbi.octave@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Cc: Rob Gill <rrobgill@protonmail.com> Cc: Macpaul Lin <macpaul.lin@mediatek.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Bin Liu <b-liu@ti.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Acked-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200618144206.2655890-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-25usb: cdns3: ep0: delete the redundant status stagePeter Chen
Each setup stage will prepare status stage at cdns3_ep0_setup_phase, it doesn't need to add extra status stage for test mode handling, otherwise, the controller can't enter the test mode. Through the Lecroy bus analyzer log, the controller will always wait status stage even it is prepared by software later than the test mode is set by software. If we comment out the status stage at cdns3_ep0_setup_phase, the controller will not enter test mode even the test mode is set beforehand. Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2019-10-07usb:cdns3: Fix for CV CH9 running with g_zero driver.Pawel Laszczak
Patch fixes issue with Halt Endnpoint Test observed during using g_zero driver as DUT. Bug occurred only on some testing board. Endpoint can defer transition to Halted state if endpoint has pending requests. Patch add additional condition that allows to return correct endpoint status during Get Endpoint Status request even if the halting endpoint is in progress. Reported-by: Rahul Kumar <kurahul@cadence.com> Signed-off-by: Rahul Kumar <kurahul@cadence.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Tested-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/1570430355-26118-1-git-send-email-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04usb: cdns3: Fix sheduling with locks held.Pawel Laszczak
Patch fix issue in cdns3_ep0_feature_handle_device function. The function usleep_range can't be used there because this function is called with locks held and IRQs disabled in cdns3_device_thread_irq_handler(). To resolve this issue patch replaces usleep_range with mdelay. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/1569484721-4424-1-git-send-email-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-03usb: cdns3: Fix Wunused-but-set-variable warningYueHaibing
drivers/usb/cdns3/ep0.c: In function cdns3_ep0_feature_handle_device: drivers/usb/cdns3/ep0.c:290:6: warning: variable wIndex set but not used [-Wunused-but-set-variable] drivers/usb/cdns3/ep0.c:289:6: warning: variable wValue set but not used [-Wunused-but-set-variable] wIndex is never used, so remove it. wValue should be use in the switch statement. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190903120615.19504-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-29usb: cdns3: Add Cadence USB3 DRD DriverPawel Laszczak
This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>