summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)Author
2024-05-24Merge tag 'tty-6.10-rc1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small TTY and Serial driver fixes that missed the 6.9-final merge window, but have been in my tree for weeks (my fault, travel caused me to miss this) These fixes include: - more n_gsm fixes for reported problems - 8520_mtk driver fix - 8250_bcm7271 driver fix - sc16is7xx driver fix All of these have been in linux-next for weeks without any reported problems" * tag 'tty-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: sc16is7xx: fix bug in sc16is7xx_set_baud() when using prescaler serial: 8250_bcm7271: use default_mux_rate if possible serial: 8520_mtk: Set RTS on shutdown for Rx in-band wakeup tty: n_gsm: fix missing receive state reset after mode switch tty: n_gsm: fix possible out-of-bounds in gsm0_receive()
2024-05-22Merge tag 'tty-6.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty/serial driver changes for 6.10-rc1. Included in here are: - Usual good set of api cleanups and evolution by Jiri Slaby to make the serial interfaces move out of the 1990's by using kfifos instead of hand-rolling their own logic. - 8250_exar driver updates - max3100 driver updates - sc16is7xx driver updates - exar driver updates - sh-sci driver updates - tty ldisc api addition to help refuse bindings - other smaller serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (113 commits) serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev() serial: imx: Raise TX trigger level to 8 serial: 8250_pnp: Simplify "line" related code serial: sh-sci: simplify locking when re-issuing RXDMA fails serial: sh-sci: let timeout timer only run when DMA is scheduled serial: sh-sci: describe locking requirements for invalidating RXDMA serial: sh-sci: protect invalidating RXDMA on shutdown tty: add the option to have a tty reject a new ldisc serial: core: Call device_set_awake_path() for console port dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema tty: serial: uartps: Add support for uartps controller reset arm64: zynqmp: Add resets property for UART nodes dt-bindings: serial: cdns,uart: Add optional reset property serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS() serial: 8250_exar: Keep the includes sorted serial: 8250_exar: Make type of bit the same in exar_ee_*_bit() serial: 8250_exar: Use BIT() in exar_ee_read() serial: 8250_exar: Switch to use dev_err_probe() serial: 8250_exar: Return directly from switch-cases serial: 8250_exar: Decrease indentation level ...
2024-05-21Merge tag 's390-6.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Alexander Gordeev: - Switch read and write software bits for PUDs - Add missing hardware bits for PUDs and PMDs - Generate unwind information for C modules to fix GDB unwind error for vDSO functions - Create .build-id links for unstripped vDSO files to enable vDSO debugging with symbols - Use standard stack frame layout for vDSO generated stack frames to manually walk stack frames without DWARF information - Rework perf_callchain_user() and arch_stack_walk_user() functions to reduce code duplication - Skip first stack frame when walking user stack - Add basic checks to identify invalid instruction pointers when walking stack frames - Introduce and use struct stack_frame_vdso_wrapper within vDSO user wrapper code to automatically generate an asm-offset define. Also use STACK_FRAME_USER_OVERHEAD instead of STACK_FRAME_OVERHEAD to document that the code works with user space stack - Clear the backchain of the extra stack frame added by the vDSO user wrapper code. This allows the user stack walker to detect and skip the non-standard stack frame. Without this an incorrect instruction pointer would be added to stack traces. - Rewrite psw_idle() function in C to ease maintenance and further enhancements - Remove get_vtimer() function and use get_cpu_timer() instead - Mark psw variable in __load_psw_mask() as __unitialized to avoid superfluous clearing of PSW - Remove obsolete and superfluous comment about removed TIF_FPU flag - Replace memzero_explicit() and kfree() with kfree_sensitive() to fix warnings reported by Coccinelle - Wipe sensitive data and all copies of protected- or secure-keys from stack when an IOCTL fails - Both do_airq_interrupt() and do_io_interrupt() functions set CIF_NOHZ_DELAY flag. Move it in do_io_irq() to simplify the code - Provide iucv_alloc_device() and iucv_release_device() helpers, which can be used to deduplicate more or less identical IUCV device allocation and release code in four different drivers - Make use of iucv_alloc_device() and iucv_release_device() helpers to get rid of quite some code and also remove a cast to an incompatible function (clang W=1) - There is no user of iucv_root outside of the core IUCV code left. Therefore remove the EXPORT_SYMBOL - __apply_alternatives() contains a runtime check which verifies that the size of the to be patched code area is even. Convert this to a compile time check - Increase size of buffers for sending z/VM CP DIAGNOSE X'008' commands from 128 to 240 - Do not accept z/VM CP DIAGNOSE X'008' commands longer than maximally allowed - Use correct defines IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN instead of IPL_BP_FCP_LEN and IPL_BP0_FCP_LEN ones to initialize NVMe reIPL block on 'scp_data' sysfs attribute update - Initialize the correct fields of the NVMe dump block, which were confused with FCP fields - Refactor macros for 'scp_data' (re-)IPL sysfs attribute to reduce code duplication - Introduce 'scp_data' sysfs attribute for dump IPL to allow tools such as dumpconf passing additional kernel command line parameters to a stand-alone dumper - Rework the CPACF query functions to use the correct RRE or RRF instruction formats and set instruction register fields correctly - Instead of calling BUG() at runtime force a link error during compile when a unsupported opcode is used with __cpacf_query() or __cpacf_check_opcode() functions - Fix a crash in ap_parse_bitmap_str() function on /sys/bus/ap/apmask or /sys/bus/ap/aqmask sysfs file update with a relative mask value - Fix "bindings complete" udev event which should be sent once all AP devices have been bound to device drivers and again when unbind/bind actions take place and all AP devices are bound again - Facility list alt_stfle_fac_list is nowhere used in the decompressor, therefore remove it there - Remove custom kprobes insn slot allocator in favour of the standard module_alloc() one, since kernel image and module areas are located within 4GB - Use kvcalloc() instead of kvmalloc_array() in zcrypt driver to avoid calling memset() with a large byte count and get rid of the sparse warning as result * tag 's390-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits) s390/zcrypt: Use kvcalloc() instead of kvmalloc_array() s390/kprobes: Remove custom insn slot allocator s390/boot: Remove alt_stfle_fac_list from decompressor s390/ap: Fix bind complete udev event sent after each AP bus scan s390/ap: Fix crash in AP internal function modify_bitmap() s390/cpacf: Make use of invalid opcode produce a link error s390/cpacf: Split and rework cpacf query functions s390/ipl: Introduce sysfs attribute 'scp_data' for dump ipl s390/ipl: Introduce macros for (re)ipl sysfs attribute 'scp_data' s390/ipl: Fix incorrect initialization of nvme dump block s390/ipl: Fix incorrect initialization of len fields in nvme reipl block s390/ipl: Do not accept z/VM CP diag X'008' cmds longer than max length s390/ipl: Fix size of vmcmd buffers for sending z/VM CP diag X'008' cmds s390/alternatives: Convert runtime sanity check into compile time check s390/iucv: Unexport iucv_root tty: hvc-iucv: Make use of iucv_alloc_device() s390/smsgiucv_app: Make use of iucv_alloc_device() s390/netiucv: Make use of iucv_alloc_device() s390/vmlogrdr: Make use of iucv_alloc_device() s390/iucv: Provide iucv_alloc_device() / iucv_release_device() ...
2024-05-21Merge tag 'pci-v6.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ...
2024-05-19Merge tag 'kgdb-6.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux Pull kgdb updates from Daniel Thompson: "Nine patches this cycle and they split into just three topics: - Adopt coccinelle's recommendation to adopt str_plural() - A set of seven patches to refactor kdb_read() to improve both code clarity and its discipline with respect to fixed size buffers. This isn't just a refactor. Between them these also fix a cursor movement redraw problem and two buffer overflows (one latent and one real, albeit difficult to tickle). - Fix an NMI-safety problem when enqueuing kdb's keyboard reset code I wrote eight of the nine patches in this collection so many thanks to Doug Anderson for the reviews. The changes that affects drivers/tty/serial is acked by Greg KH" * tag 'kgdb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: serial: kgdboc: Fix NMI-safety problems from keyboard reset code kdb: Simplify management of tmpbuffer in kdb_read() kdb: Replace double memcpy() with memmove() in kdb_read() kdb: Use format-specifiers rather than memset() for padding in kdb_read() kdb: Merge identical case statements in kdb_read() kdb: Fix console handling when editing and tab-completing commands kdb: Use format-strings rather than '\0' injection in kdb_read() kdb: Fix buffer overflow during tab-complete kdb: Use str_plural() to fix Coccinelle warning
2024-05-15Merge tag 'printk-for-6.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Use no_printk() instead of "if (0) printk()" constructs to avoid generating printk index for messages disabled at compile time - Remove deprecated strncpy/strcpy from printk.c - Remove redundant CONFIG_BASE_FULL in favor of CONFIG_BASE_SMALL * tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: cleanup deprecated uses of strncpy/strcpy printk: Remove redundant CONFIG_BASE_FULL printk: Change type of CONFIG_BASE_SMALL to bool printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled ceph: Use no_printk() helper dyndbg: Use *no_printk() helpers dev_printk: Add and use dev_no_printk() printk: Let no_printk() use _printk()
2024-05-14tty: hvc-iucv: Make use of iucv_alloc_device()Heiko Carstens
Make use of iucv_alloc_device() to get rid of quite some code. Acked-by: Alexandra Winter <wintera@linux.ibm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240506194454.1160315-6-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-13Merge tag 'asm-generic-alpha' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull alpha updates from Arnd Bergmann: "I had investigated dropping support for alpha EV5 and earlier a while ago after noticing that this is the only supported CPU family in the kernel without native byte access and that Debian has already dropped support for this generation last year [1] in order to improve performance for the newer machines. This topic came up again when Paul McKenney noticed that parts of the RCU code already rely on byte access and do not work on alpha EV5 reliably, so we decided on using my series to avoid the problem entirely. Al Viro did another series for alpha to address all the known build issues. I rebased his patches without any further changes and included it as a baseline for my work here to avoid conflicts and allow backporting the fixes to stable kernels for the now removed hardware support as well" [ I dearly loved alpha back in the days, but the lack of byte and word operations was a horrible mistake and made everything worse - including very much the crazy IO contortions that resulted from it. It certainly wasn't the only mistake in the architecture, but it's the first-order issue. So while it's a bit sad to see the support for my first alpha go away, if you want to run museum hardware, maybe you should use museum kernels.. - Linus ] * tag 'asm-generic-alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: alpha: drop pre-EV56 support alpha: cabriolet: remove EV5 CPU support alpha: remove LCA and APECS based machines alpha: sable: remove early machine support alpha: remove DECpc AXP150 (Jensen) support alpha: trim the unused stuff from asm-offsets.c alpha: jensen, t2 - make __EXTERN_INLINE same as for the rest alpha: core_lca: take the unused functions out alpha: missing includes alpha: sys_sio: fix misspelled ifdefs alpha: don't make functions public without a reason alpha: add clone3() support alpha: fix modversions for strcpy() et.al. alpha: sort scr_mem{cpy,move}w() out
2024-05-10serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()Hans de Goede
If a serdev_device_driver is already loaded for a serdev_tty_port when it gets registered by tty_port_register_device_attr_serdev() then that driver's probe() method will be called immediately. The serdev_device_driver's probe() method should then be able to call serdev_device_open() successfully, but because UPF_DEAD is still dead serdev_device_open() will fail with -ENXIO in this scenario: serdev_device_open() ctrl->ops->open() /* this callback being ttyport_open() */ tty->ops->open() /* this callback being uart_open() */ tty_port_open() port->ops->activate() /* this callback being uart_port_activate() */ Find bit UPF_DEAD is set in uport->flags and fail with errno -ENXIO. Fix this be clearing UPF_DEAD before tty_port_register_device_attr_serdev() note this only moves up the UPD_DEAD clearing a small bit, before: tty_port_register_device_attr_serdev(); mutex_unlock(&tty_port.mutex); uart_port.flags &= ~UPF_DEAD; mutex_unlock(&port_mutex); after: uart_port.flags &= ~UPF_DEAD; tty_port_register_device_attr_serdev(); mutex_unlock(&tty_port.mutex); mutex_unlock(&port_mutex); Reported-by: Weifeng Liu <weifeng.liu.z@gmail.com> Closes: https://lore.kernel.org/platform-driver-x86/20240505130800.2546640-1-weifeng.liu.z@gmail.com/ Tested-by: Weifeng Liu <weifeng.liu.z@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240509141549.63704-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10serial: imx: Raise TX trigger level to 8Matthias Schiffer
At the default TX trigger level of 2 in non-DMA mode (meaning that an interrupt is generated when less than 2 characters are left in the FIFO), we have observed frequent buffer underruns at 115200 Baud on an i.MX8M Nano. This can cause communication issues if the receiving side expects a continuous transfer. Increasing the level to 8 makes the UART trigger an interrupt earlier, giving the kernel enough time to refill the FIFO, at the cost of triggering one interrupt per ~24 instead of ~30 bytes of transmitted data (as the i.MX UART has a 32 byte FIFO). Signed-off-by: Michael Krummsdorf <michael.krummsdorf@tq-group.com> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20240508133744.35858-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10serial: 8250_pnp: Simplify "line" related codeIlpo Järvinen
8250_pnp sets drvdata to line + 1 if the probe is successful. The users of drvdata are in remove, suspend and resume callbacks, none of which will be called if probe failed. The line acquired from drvdata can never be zero in those functions and the checks for that can be removed. Eliminate also +/-1 step because all users of line subtract 1 from the value. These might have been leftover from legacy PM callbacks that could be called without probe being successful. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240506121202.11253-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10serial: sh-sci: simplify locking when re-issuing RXDMA failsWolfram Sang
Avoid a superfluous unlock/lock-pair by simply moving the printout to the end of bailing out. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20240506114016.30498-10-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10serial: sh-sci: let timeout timer only run when DMA is scheduledWolfram Sang
The hrtimer for RXDMA timeout was unconditionally restarted in the RXDMA complete handler ignoring the fact that setting up DMA may fail and PIO is used instead. Explicitly stop the timer when DMA is completed and only restart it when setting up DMA was successful. This makes the intention of the timer much clearer, the driver easier to understand and simplifies assumptions about the timer. The latter avoids race conditions if these assumptions were not met or confused. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20240506114016.30498-9-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10serial: sh-sci: describe locking requirements for invalidating RXDMAWolfram Sang
Make sure everyone knows that calling this function needs protection. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20240506114016.30498-8-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10serial: sh-sci: protect invalidating RXDMA on shutdownWolfram Sang
The to-be-fixed commit removed locking when invalidating the DMA RX descriptors on shutdown. It overlooked that there is still a rx_timer running which may still access the protected data. So, re-add the locking. Reported-by: Dirk Behme <dirk.behme@de.bosch.com> Closes: https://lore.kernel.org/r/ee6c9e16-9f29-450e-81da-4a8dceaa8fc7@de.bosch.com Fixes: 2c4ee23530ff ("serial: sh-sci: Postpone DMA release when falling back to PIO") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20240506114016.30498-7-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-06printk: Change type of CONFIG_BASE_SMALL to boolYoann Congal
CONFIG_BASE_SMALL is currently a type int but is only used as a boolean. So, change its type to bool and adapt all usages: CONFIG_BASE_SMALL == 0 becomes !IS_ENABLED(CONFIG_BASE_SMALL) and CONFIG_BASE_SMALL != 0 becomes IS_ENABLED(CONFIG_BASE_SMALL). Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Yoann Congal <yoann.congal@smile.fr> Link: https://lore.kernel.org/r/20240505080343.1471198-3-yoann.congal@smile.fr Signed-off-by: Petr Mladek <pmladek@suse.com>
2024-05-04tty: add the option to have a tty reject a new ldiscLinus Torvalds
... and use it to limit the virtual terminals to just N_TTY. They are kind of special, and in particular, the "con_write()" routine violates the "writes cannot sleep" rule that some ldiscs rely on. This avoids the BUG: sleeping function called from invalid context at kernel/printk/printk.c:2659 when N_GSM has been attached to a virtual console, and gsmld_write() calls con_write() while holding a spinlock, and con_write() then tries to get the console lock. Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daniel Starke <daniel.starke@siemens.com> Reported-by: syzbot <syzbot+dbac96d8e73b61aa559c@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=dbac96d8e73b61aa559c Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20240423163339.59780-1-torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: sc16is7xx: fix bug in sc16is7xx_set_baud() when using prescalerHugo Villeneuve
When using a high speed clock with a low baud rate, the 4x prescaler is automatically selected if required. In that case, sc16is7xx_set_baud() properly configures the chip registers, but returns an incorrect baud rate by not taking into account the prescaler value. This incorrect baud rate is then fed to uart_update_timeout(). For example, with an input clock of 80MHz, and a selected baud rate of 50, sc16is7xx_set_baud() will return 200 instead of 50. Fix this by first changing the prescaler variable to hold the selected prescaler value instead of the MCR bitfield. Then properly take into account the selected prescaler value in the return value computation. Also add better documentation about the divisor value computation. Fixes: dfeae619d781 ("serial: sc16is7xx") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20240430200431.4102923-1-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_bcm7271: use default_mux_rate if possibleDoug Berger
There is a scenario when resuming from some power saving states with no_console_suspend where console output can be generated before the 8250_bcm7271 driver gets the opportunity to restore the baud_mux_clk frequency. Since the baud_mux_clk is at its default frequency at this time the output can be garbled until the driver gets the opportunity to resume. Since this is only an issue with console use of the serial port during that window and the console isn't likely to use baud rates that require alternate baud_mux_clk frequencies, allow the driver to select the default_mux_rate if it is accurate enough. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Cc: stable@vger.kernel.org Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240424222559.1844045-1-opendmb@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8520_mtk: Set RTS on shutdown for Rx in-band wakeupPin-yen Lin
When Rx in-band wakeup is enabled, set RTS to true in mtk8250_shutdown() so the connected device can still send message and trigger IRQ when the system is suspended. Fixes: 18c9d4a3c249 ("serial: When UART is suspended, set RTS to false") Cc: stable <stable@kernel.org> Signed-off-by: Pin-yen Lin <treapking@chromium.org> Link: https://lore.kernel.org/r/20240424130619.2924456-1-treapking@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04tty: n_gsm: fix missing receive state reset after mode switchDaniel Starke
The current implementation uses either gsm0_receive() or gsm1_receive() depending on whether the user configured the mux in basic or advanced option mode. Both functions share some state values over the same logical elements of the frame. However, both frame types differ in their nature. gsm0_receive() uses non-transparency framing, whereas gsm1_receive() uses transparency mechanism. Switching between both modes leaves the receive function in an undefined state when done during frame reception. Fix this by splitting both states. Add gsm0_receive_state_check_and_fix() and gsm1_receive_state_check_and_fix() to ensure that gsm->state is reset after a change of gsm->receive. Note that gsm->state is only accessed in: - gsm0_receive() - gsm1_receive() - gsm_error() Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20240424054842.7741-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04tty: n_gsm: fix possible out-of-bounds in gsm0_receive()Daniel Starke
Assuming the following: - side A configures the n_gsm in basic option mode - side B sends the header of a basic option mode frame with data length 1 - side A switches to advanced option mode - side B sends 2 data bytes which exceeds gsm->len Reason: gsm->len is not used in advanced option mode. - side A switches to basic option mode - side B keeps sending until gsm0_receive() writes past gsm->buf Reason: Neither gsm->state nor gsm->len have been reset after reconfiguration. Fix this by changing gsm->count to gsm->len comparison from equal to less than. Also add upper limit checks against the constant MAX_MRU in gsm0_receive() and gsm1_receive() to harden against memory corruption of gsm->len and gsm->mru. All other checks remain as we still need to limit the data according to the user configuration and actual payload size. Reported-by: j51569436@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218708 Tested-by: j51569436@gmail.com Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20240424054842.7741-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: core: Call device_set_awake_path() for console portClaudiu Beznea
In case the UART port is used as a console, no_console_suspend is available in bootargs and UART port is part of a software-controlled power domain we need to call device_set_awake_path(). This lets the power domain core code know that this domain should not be powered off during system suspend. Otherwise, the UART port power domain is turned off, nothing is printed while suspending and the suspend/resume process is blocked. This was detected on the Renesas RZ/G3S SoC while adding support for power domains. Based on code investigation (on v6.9-rc5), this issue is present on other SoCs (e.g., Renesas R-Mobile A1 [1], IMX8QXP [2]) and different SoCs have particular implementation to handle it. Due to this the patch added the call of device_set_awake_path() in uart_suspend_port() instead of having it in the platform specific UART driver. [1] drivers/pmdomain/renesas/rmobile-sysc.c:116 [2] drivers/pmdomain/imx/scu-pd.c:357 Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20240430095930.2806067-1-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04tty: serial: uartps: Add support for uartps controller resetManikanta Guntupalli
Add support for an optional reset for the uartps controller using the reset driver. If the uartps node contains the "resets" property, then cdns_uart_startup performs uartps controller non-pulse out of reset and reset in exit path. Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Link: https://lore.kernel.org/r/20240425062358.1347684-4-manikanta.guntupalli@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS()Andy Shevchenko
The SIMPLE_DEV_PM_OPS() is deprecated, replace it with the DEFINE_SIMPLE_DEV_PM_OPS() and use pm_sleep_ptr() for setting the driver's PM routines. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20240422083237.207447-1-andy.shevchenko@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Keep the includes sortedAndy Shevchenko
Keep the includes sorted. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-14-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Make type of bit the same in exar_ee_*_bit()Andy Shevchenko
Make type of bit parameter and returned one the same in exar_ee_*_bit(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-13-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Use BIT() in exar_ee_read()Andy Shevchenko
Use BIT() in exar_ee_read() like other functions do. While at it, explain the EEPROM type and the dummy bit requirement. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-12-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Switch to use dev_err_probe()Andy Shevchenko
Switch to use dev_err_probe() to simplify the error path and unify a message template. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-11-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Return directly from switch-casesAndy Shevchenko
There are two similar switch-cases which use different style. Unify them and one more to return from the cases directly. While at it, add missing default in another switch-case. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-10-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Decrease indentation levelAndy Shevchenko
Decrease indentation level in some places. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-9-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Kill unneeded ->board_init()Andy Shevchenko
We may reuse ->setup() for the same purpose as it was done before. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-8-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Extract cti_board_init_osc_freq() helperAndy Shevchenko
Extract cti_board_init_osc_freq() helper to avoid code duplication. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-7-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Trivia typo fixesAndy Shevchenko
Trivia typo fixes: interupts --> interrupts and others. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-6-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Use PCI_SUBVENDOR_ID_IBM for subvendor IDAndy Shevchenko
Use PCI_SUBVENDOR_ID_IBM for subvendor ID instead of vendor one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-5-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Kill CTI_PCI_DEVICE()Andy Shevchenko
The CTI_PCI_DEVICE() duplicates EXAR_DEVICE(). Kill the former. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Describe all parameters in kernel docAndy Shevchenko
Kernel doc validator is not happy: warning: Function parameter or struct member 'pcidev' not described in 'cti_get_port_type_xr17c15x_xr17v25x' warning: Function parameter or struct member 'pcidev' not described in 'cti_get_port_type_fpga' warning: Function parameter or struct member 'pcidev' not described in 'cti_get_port_type_xr17v35x' Add missed descriptions. Fixes: f7ce07062988 ("serial: exar: add CTI specific setup code") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Don't return positive values as error codesAndy Shevchenko
PCI core may return positive codes for the specific errors. There is a special API to convert them to negative stanrard ones. Use that API to avoid returning positive values as error codes. Fixes: f7ce07062988 ("serial: exar: add CTI specific setup code") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-03alpha: remove DECpc AXP150 (Jensen) supportArnd Bergmann
This is one of the hackiest Alpha machines, and the only one without PCI support. Removing this allows cleaning up code in eise and tty drivers in addition to the architecture code. Acked-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-04-26serial: kgdboc: Fix NMI-safety problems from keyboard reset codeDaniel Thompson
Currently, when kdb is compiled with keyboard support, then we will use schedule_work() to provoke reset of the keyboard status. Unfortunately schedule_work() gets called from the kgdboc post-debug-exception handler. That risks deadlock since schedule_work() is not NMI-safe and, even on platforms where the NMI is not directly used for debugging, the debug trap can have NMI-like behaviour depending on where breakpoints are placed. Fix this by using the irq work system, which is NMI-safe, to defer the call to schedule_work() to a point when it is safe to call. Reported-by: Liuye <liu.yeC@h3c.com> Closes: https://lore.kernel.org/all/20240228025602.3087748-1-liu.yeC@h3c.com/ Cc: stable@vger.kernel.org Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240424-kgdboc_fix_schedule_work-v2-1-50f5a490aec5@linaro.org Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2024-04-25tty: 8250_pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACYDamien Le Moal
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro. Link: https://lore.kernel.org/r/20240325070944.3600338-7-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23Merge 6.9-rc5 into tty-nextGreg Kroah-Hartman
We want the tty fixes in here as well, and it resolves a merge conflict in: drivers/tty/serial/serial_core.c as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-20serial: msm: check dma_map_sg() return value properlyJiri Slaby (SUSE)
The -next commit f8fef2fa419f (tty: msm_serial: use dmaengine_prep_slave_sg()), switched to using dma_map_sg(). But the return value of dma_map_sg() is special: it returns number of elements mapped. And not a standard error value. The commit also forgot to reset dma->tx_sg in case of this failure. Fix both these mistakes. Thanks to Marek who helped debugging this. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20240419080931.30949-1-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: fix checkpach warningsParker Newman
-Fix several "missing identifier name" warnings from checkpatch in struct exar8250_platform and struct exar8250_board. Example: WARNING: function definition argument <arg> should also have an identifier name - Fix space before tab warning from checkpatch: WARNING: please, no space before tabs + * 0^I^I2 ^IMode bit 0$ Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/f7fa6c16cb5f2c8c1c7cb7d29f80bc7be53f91ab.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: add CTI specific setup codeParker Newman
This is a large patch but is only additions. All changes and removals are made in previous patches in this series. - Add CTI board_init and port setup functions for each UART type - Add CTI_EXAR_DEVICE() and CTI_PCI_DEVICE() macros - Add support for reading a word from the Exar EEPROM. - Add support for configuring and setting a single MPIO - Add various helper functions for CTI boards. - Add osc_freq to struct exar8250 Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/ae4a66e7342b686cb8d4b15317585dfb37222cf4.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: add CTI cards to exar_get_nr_portsParker Newman
Add code for getting number of ports of CTI cards to exar_get_nr_ports(). Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/0c64bdf852f39aec966b38696695d951e485d7e6.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: moved generic_rs485 further up in 8250_exar.cParker Newman
Preparatory patch moving generic_rs485_config and generic_rs485_supported higher in the file to allow for CTI setup functions to use them. Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/a7bf2a42de759908c058246ec15f60bde9a5dc65.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: add optional board_init functionParker Newman
Add an optional "board_init()" function pointer to struct exar8250_board which is called once during probe prior to setting up the ports. It will be used in subsequent patches of this series. Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/0e72a3154114c733283ff273bc1e31456ee101f4.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: added a exar_get_nr_ports functionParker Newman
Moved code for getting number of ports from exar_pci_probe() to a separate exar_get_nr_ports() function. CTI specific code will be added in another patch in this series. Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/33f2bf66bc334573c10cf670a299ecef0b7264bc.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: remove old Connect Tech setupParker Newman
Preparatory patch removing existing Connect Tech setup code and CONNECT_DEVICE macro. Subsequent patches in this series will add in new UART family specific setup code and new device definition macros to allow for supporting CTI serial cards with Exar PCI IDs and CTI PCI IDs. Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/06a04b6c683ca20c50646cc0836be869c2dacd87.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-22 22:40:15 +0000