| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
Among the larger pieces:
- Power management improvements for TI am335x and am437x (RTC
suspend/wake)
- Misc new additions for Amlogic (socinfo updates)
- ZynqMP FPGA manager
- Nvidia improvements for reset/powergate handling
- PMIC wrapper for Mediatek MT8516
- Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
soc: aspeed: fix Kconfig
soc: add aspeed folder and misc drivers
spi: zynqmp: Fix build break
soc: imx: Add generic i.MX8 SoC driver
MAINTAINERS: Update email for Qualcomm SoC maintainer
memory: tegra: Fix a typos for "fdcdwr2" mc client
Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+"
memory: tegra: Replace readl-writel with mc_readl-mc_writel
memory: tegra: Fix integer overflow on tick value calculation
memory: tegra: Fix missed registers values latching
ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30
optee: allow to work without static shared memory
soc/tegra: pmc: Move powergate initialisation to probe
soc/tegra: pmc: Remove reset sysfs entries on error
soc/tegra: pmc: Fix reset sources and levels
soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A
soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask
fpga manager: Adding FPGA Manager support for Xilinx zynqmp
dt-bindings: fpga: Add bindings for ZynqMP fpga driver
firmware: xilinx: Add fpga API's
...
|
|
Pull ARM SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to
multiplatform enabled.
- Cleanups of Davinci
This also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
ARM: debug-ll: add default address for digicolor
ARM: u300: regulator: add MODULE_LICENSE()
ARM: ep93xx: move private headers out of mach/*
ARM: ep93xx: move pinctrl interfaces into include/linux/soc
ARM: ep93xx: keypad: stop using mach/platform.h
ARM: ep93xx: move network platform data to separate header
ARM: stm32: add AMBA support for stm32 family
MAINTAINERS: update arch/arm/mach-davinci
ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
soc: ixp4xx: qmgr: Add DT probe code
soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
soc: ixp4xx: npe: Add DT probe code
soc: ixp4xx: Add DT bindings for IXP4xx NPE
soc: ixp4xx: qmgr: Pass resources
soc: ixp4xx: Remove unused functions
soc: ixp4xx: Uninline several functions
soc: ixp4xx: npe: Pass addresses as resources
ARM: ixp4xx: Turn the QMGR into a platform device
ARM: ixp4xx: Turn the NPE into a platform device
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These fix a recent regression causing kernels built with CONFIG_PM
unset to crash on systems that support the Performance and Energy Bias
Hint (EPB), clean up the cpufreq core and some users of transition
notifiers and introduce a new power domain flag into the generic power
domains framework (genpd).
Specifics:
- Fix recent regression causing kernels built with CONFIG_PM unset to
crash on systems that support the Performance and Energy Bias Hint
(EPB) by avoiding to compile the EPB-related code depending on
CONFIG_PM when it is unset (Rafael Wysocki).
- Clean up the transition notifier invocation code in the cpufreq
core and change some users of cpufreq transition notifiers
accordingly (Viresh Kumar).
- Change MAINTAINERS to cover the schedutil governor as part of
cpufreq (Viresh Kumar).
- Simplify cpufreq_init_policy() to avoid redundant computations (Yue
Hu).
- Add explanatory comment to the cpufreq core (Rafael Wysocki).
- Introduce a new flag, GENPD_FLAG_RPM_ALWAYS_ON, to the generic
power domains (genpd) framework along with the first user of it
(Leonard Crestez)"
* tag 'pm-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
soc: imx: gpc: Use GENPD_FLAG_RPM_ALWAYS_ON for ERR009619
PM / Domains: Add GENPD_FLAG_RPM_ALWAYS_ON flag
cpufreq: Update MAINTAINERS to include schedutil governor
cpufreq: Don't find governor for setpolicy drivers in cpufreq_init_policy()
cpufreq: Explain the kobject_put() in cpufreq_policy_alloc()
cpufreq: Call transition notifier only once for each policy
x86: intel_epb: Take CONFIG_PM into account
|
|
This allows PU domain to be turned off in suspend and save power.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When enabling ARCH_SUNXI from allnoconfig, SUNXI_SRAM is enabled, but
not REGMAP_MMIO, so the kernel fails to link with an undefined reference
to __devm_regmap_init_mmio_clk. Select REGMAP_MMIO, as suggested in
drivers/base/regmap/Kconfig.
This creates the following dependency loop:
drivers/of/Kconfig:68: symbol OF_IRQ depends on IRQ_DOMAIN
kernel/irq/Kconfig:63: symbol IRQ_DOMAIN is selected by REGMAP
drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO
drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by SUNXI_SRAM
drivers/soc/sunxi/Kconfig:4: symbol SUNXI_SRAM is selected by USB_MUSB_SUNXI
drivers/usb/musb/Kconfig:63: symbol USB_MUSB_SUNXI depends on GENERIC_PHY
drivers/phy/Kconfig:7: symbol GENERIC_PHY is selected by PHY_BCM_NS_USB3
drivers/phy/broadcom/Kconfig:29: symbol PHY_BCM_NS_USB3 depends on MDIO_BUS
drivers/net/phy/Kconfig:12: symbol MDIO_BUS default is visible depending on PHYLIB
drivers/net/phy/Kconfig:181: symbol PHYLIB is selected by ARC_EMAC_CORE
drivers/net/ethernet/arc/Kconfig:18: symbol ARC_EMAC_CORE is selected by ARC_EMAC
drivers/net/ethernet/arc/Kconfig:24: symbol ARC_EMAC depends on OF_IRQ
To fix the circular dependency, make USB_MUSB_SUNXI select GENERIC_PHY
instead of depending on it. This matches the use of GENERIC_PHY by all
but two other drivers.
Cc: <stable@vger.kernel.org> # 4.19
Fixes: 5828729bebbb ("soc: sunxi: export a regmap for EMAC clock reg on A64")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes build break:
scripts/kconfig/conf --allnoconfig Kconfig
drivers/soc/Kconfig:24: 'menu' in different file than 'menu'
drivers/soc/aspeed/Kconfig:1: location of the 'menu'
drivers/Kconfig:233: 'menu' in different file than 'menu'
drivers/soc/aspeed/Kconfig:1: location of the 'menu'
<none>:34: syntax error
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/drivers
Select correct pwm solution by default.
* tag 'v5.2-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: Set the proper PWM for rk3288
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
pmic wrapper:
- add mt8516 bindings
- add mt8516 driver support
- fix clang warning
* tag 'v5.1-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: pwrap: Zero initialize rdata in pwrap_init_cipher
soc: mediatek: pwrap: add support for MT8516 pwrap
soc: mediatek: pwrap: add missing check on rstc
dt-bindings: pwrap: mediatek: add pwrap support for MT8516
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/drivers
Qualcomm ARM Based Driver Updates for v5.2
* Update MAINTAINERS for Andy Gross's new email address
* Add support for mmap in RMTFS
* Fixup for QMI to change txn wait to non-interruptible
* Fixup for error code in probe of cmd-db
* Fixup for slot number check in RMPH-RSC
* tag 'qcom-drivers-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
MAINTAINERS: Update email for Qualcomm SoC maintainer
drivers: soc: qcom: rpmh-rsc: Correct check for slot number
soc: qcom: cmd-db: Fix an error code in cmd_db_dev_probe()
soc: qcom: qmi: Change txn wait to non-interruptible
soc: qcom: rmtfs: Add support for mmap functionality
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Create a SoC folder for the ASPEED parts and place the misc drivers
currently present into this folder. These drivers are not generic part
drivers, but rather only apply to the ASPEED SoCs.
Signed-off-by: Patrick Venture <venture@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers change for 5.2:
- A series from Aisheng to generalize the SCU powerdomain driver
for easier adding new SCU based platforms like imx8qm.
- Add a generic i.MX8 SoC driver for reporting SoC and platform
information.
- Replace explicit polling loop with a call to regmap_read_poll_timeout()
for gpcv2 driver to avoid code repetition.
- Use devm_platform_ioremap_resource() to simplify gpc/gpcv2 driver
code a bit.
- Add general IRQ support for imx-scu driver, so that interrupt of
device like RTC, thermal and watchdog can be handled.
* tag 'imx-drivers-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: Add generic i.MX8 SoC driver
firmware: imx: enable imx scu general irq function
soc: imx: gpcv2: use devm_platform_ioremap_resource() to simplify code
soc: imx: gpc: use devm_platform_ioremap_resource() to simplify code
firmware: imx: scu-pd: decouple the SS information from domain names
firmware: imx: scu-pd: add specifying the base of domain name index support
firmware: imx: scu-pd: use bool to set postfix
soc: imx: gpcv2: Make use of regmap_read_poll_timeout()
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers
soc: amlogic: updates for v5.2, round 2
- VPU power domain: add supporg for G12A SoCs
- socinfo: add new SoC and package IDS.
* tag 'amlogic-drivers-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A
soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/soc
This modernizes the IXP4xx platform and adds initial Device Tree
Support. We migrate to MULTI_IRQ_HANDLER, bumps the IRQs to
offset 16, converts to SPARSE_IRQ, then we add proper subsystem
drivers in each subsystem for irqchip, GPIO and clocksource and
switch over to using these new drivers.
Next we modernize the NPE and QMGR drivers and push them down
into drivers/soc.
This has been tested on the IXP4xx NSLU2 and the Gateworks
GW2358-4.
* tag 'ixp4xx-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: (31 commits)
ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
soc: ixp4xx: qmgr: Add DT probe code
soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
soc: ixp4xx: npe: Add DT probe code
soc: ixp4xx: Add DT bindings for IXP4xx NPE
soc: ixp4xx: qmgr: Pass resources
soc: ixp4xx: Remove unused functions
soc: ixp4xx: Uninline several functions
soc: ixp4xx: npe: Pass addresses as resources
ARM: ixp4xx: Turn the QMGR into a platform device
ARM: ixp4xx: Turn the NPE into a platform device
ARM: ixp4xx: Move IXP4xx QMGR and NPE headers
ARM: ixp4xx: Move NPE and QMGR to drivers/soc
ARM: dts: Add some initial IXP4xx device trees
ARM: ixp4xx: Add device tree boot support
ARM: ixp4xx: Add DT bindings
gpio: ixp4xx: Add OF probing support
gpio: ixp4xx: Add DT bindings
clocksource/drivers/ixp4xx: Add OF initialization support
clocksource/drivers/ixp4xx: Add DT bindings
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/drivers
Renesas ARM Based SoC Drivers Updates for v5.2
* Identify R-Car M3-W ES1.3
* tag 'renesas-drivers-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: Identify R-Car M3-W ES1.3
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.2-rc1
Besides a couple of fixes to better cope with deferred probing, this set
of patches also implements the acquire/release protocol for resets used
during powergate operations. This is necessary to allow these resets to
be temporarily shared with other devices that may also need to control
these resets.
* tag 'tegra-for-5.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Move powergate initialisation to probe
soc/tegra: pmc: Remove reset sysfs entries on error
soc/tegra: pmc: Fix reset sources and levels
soc/tegra: pmc: Implement acquire/release for resets
reset: Add acquire/release support for arrays
reset: Add acquired flag to of_reset_control_array_get()
reset: add acquired/released state for exclusive reset controls
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
arm/drivers
arm64: zynqmp: SoC changes for v5.2
- Add support for ZynqMP fpga manager
- Defer some probes which depends on firmware driver to be ready
- Debugfs fix
* tag 'zynqmp-soc-for-v5.2' of https://github.com/Xilinx/linux-xlnx:
fpga manager: Adding FPGA Manager support for Xilinx zynqmp
dt-bindings: fpga: Add bindings for ZynqMP fpga driver
firmware: xilinx: Add fpga API's
drivers: Defer probe if firmware is not ready
firmware: xilinx: fix debugfs write handler
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers
PM changes for am335x and am437x
This series adds support for am437x RTC-only mode in suspend. In the
RTC-only mode suspend, everything is shut down except the RTC. This
makes the power consumption very low for suspend mode.
To support RTC-only mode, we need to export omap_rtc_power_off_program()
from the rtc driver and improve PM code to save and restore the wkup
domain context. As RTC-only mode depends on the device being wired
properly for things like memory, we need to also check for the machine
type before we allow it. We also need to run DDR3 hardware leveling on
resume.
Note that there is a trivial merge conflict between the RTC branch
and these changes where the RTC branch makes tm2bcd() a void function
and the error handling parts can be just dropped.
* tag 'omap-for-v5.2/am4-pm-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: sleep43xx: Run EMIF HW leveling on resume path
memory: ti-emif-sram: Add ti_emif_run_hw_leveling for DDR3 hardware leveling
soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support
soc: ti: pm33xx: Move the am33xx_push_sram_idle to the top
ARM: OMAP2+: pm33xx: Add support for rtc+ddr in self refresh mode
rtc: OMAP: Add support for rtc-only mode
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers
soc: Amlogic updates for v5.2
- socinfo: support new SoCs / packages
* tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
meson-gx-socinfo: add missing of_node_put after of_device_is_available
soc: amlogic: gx-socinfo: Add new SoC IDs and Packages IDs
soc: amlogic: gx-socinfo: Add mask for each SoC packages
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This makes the queue manager driver able to probe from the device
tree. It only needs to get a memory resource and two interrupts
and the platform device provides these as resources, so all is
pretty simple.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This makes the NPE driver able to probe from the device tree.
It only needs to get three memory resources and the plaform
device provide these, so all is pretty simple.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Instead of using hardcoded base address implicitly
obtained through <linux/io.h>, pass the physical base
for the QMGR block as a memory resource and remap
it in the driver.
Also pass the two IRQs as resources and obtain them
in the driver.
Use devm_* accessors and simplify the error path in the
process. Drop memory region request as this is done by
the devm_ioremap* functions.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
These former inlines turn out to be unused in the kernel.
If they are needed in the future, they can be resurrected
by reverting or studying this commit.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
These inline functions immediately exploit the static ioremaps
for the queue manager memory region. This does not work with
multiplatform where everything need to be dynamically remapped,
so get rid of these inlines and create new exports for those
used by other drivers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Instead of using hardcoded base addresses implicitly
obtained through <linux/io.h>, pass the physical base
for the three NPE blocks as memory resources and remap
these in the driver.
Drop the memory request region business, this will
anyways be done by devm_* remapping functions.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Instead of registering everything related to the QMGR
unconditionally in the module_init() call (which will
never work with multiplatform) create a platform device
and probe the QMGR like any other device.
Put the device second in the list of devices added for
the platform so it is there when the dependent network
and crypto drivers probe later on.
This probe() path will not be taken unconditionally on
device tree boots, so remove the DT guard.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Instead of registering everything related to the NPE
unconditionally in the module_init() call (which will
never work with multiplatform) create a platform device
and probe the NPE like any other device.
Put the device first in the list of devices added for
the platform so it is there when the dependent network
and crypto drivers probe later on.
This probe() path will not be taken unconditionally on
device tree boots, so remove the DT guard.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This moves the IXP4xx Queue Manager and Network Processing
Engine headers out of the <mack/*> include path as that is
incompatible with multiplatform.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The Network Processing Engine and Queue Manager are
versatile firmware components used by several IXP4xx
drivers.
Drivers are relying on getting access to these components
using <mach/*> headers which does not work with
multiplatform. We need to find a better place for the
drivers to live.
Let's first move them to drivers/soc and the start to
refactor a bit by passing resources and moving headers.
This patch introduce static IRQ assignments but that
will be fixed by later patches in this series.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add generic i.MX8 SoC driver along with the i.MX8MQ SoC specific code.
For now, only i.MX8MQ revision B1 is supported. For any other, i.MX8MQ
revision it will print 'unknown'.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Commit 8df127456f29 ("soc/tegra: pmc: Enable XUSB partitions on boot")
was added as a workaround to ensure that the XUSB powergates or domains
were turned on early during boot because as this time the Tegra XHCI
driver did not handle the power domains at all. Now that the Tegra XHCI
driver has been updated to properly managed the power domains, the
workaround to enable the XUSB power domain early has been removed. This
also means that we can now move the initialisation of the powergates
into the PMC driver probe. Therefore, move the powergate initialisation
into the PMC driver probe and return any errors detected. To handle any
errors, functions to cleanup and remove any power-domains registered
with the generic power-domain framework have been added.
Finally the initialisation of the 'powergates_available' bitmask is kept
in the PMC early init function to allow the legacy PMC powergate APIs to
be called during early boot for enabling secondary CPUs on 32-bit Tegra
devices.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Commit 5f84bb1a4099 ("soc/tegra: pmc: Add sysfs entries for reset info")
added sysfs entries for Tegra reset source and level. However, these
sysfs are not removed on error and so if the registering of PMC device
is probe deferred, then the next time we attempt to probe the PMC device
warnings such as the following will be displayed on boot ...
sysfs: cannot create duplicate filename '/devices/platform/7000e400.pmc/reset_reason'
Fix this by calling device_remove_file() for each sysfs entry added on
failure. Note that we call device_remove_file() unconditionally without
checking if the sysfs entry was created in the first place, but this
should be OK because kernfs_remove_by_name_ns() will fail silently.
Fixes: 5f84bb1a4099 ("soc/tegra: pmc: Add sysfs entries for reset info")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Commit 5f84bb1a4099 ("soc/tegra: pmc: Add sysfs entries for reset info")
added support for reading the Tegra reset source and level from sysfs.
However, there are a few issues with this commit which are ...
1. The number of reset sources for Tegra210 is defined as 5 but it
should be 6.
2. The number of reset sources for Tegra186 is defined as 13 but it
should be 15.
3. The SoC data variables num_reset_sources and num_reset_levels are
defined but never used.
Fix the above by ...
1. Removing the reset source 'AOTAG' from the tegra30_reset_sources
because this is only applicable for Tegra210.
2. Adding a new tegra210_reset_sources structure for Tegra210 reset
sources.
3. Correct the number of reset sources for Tegra210 and Tegra186 by
using the ARRAY_SIZE macro.
4. Updating the functions reset_reason_show() and reset_level_show()
to check whether the value read is valid. While we are at it
clean-up these functions to remove an unnecessary u32 variable.
Fixes: 5f84bb1a4099 ("soc/tegra: pmc: Add sysfs entries for reset info")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Amlogic G12A SoC has a very similar VPU Power Controller setup
than the older GXBB, GXL & GXm SoCs.
This patch adds the variant support for G12A.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The register bitmask to power on/off the VPU memories was incorectly set
to 0x2 instead of 0x3. While still working, let's use the recommended
vendor value instead.
Fixes: 75fcb5ca4b46 ("soc: amlogic: add Meson GX VPU Domains driver")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
When building with -Wsometimes-uninitialized, Clang warns:
drivers/soc/mediatek/mtk-pmic-wrap.c:1358:6: error: variable 'rdata' is
used uninitialized whenever '||' condition is true
[-Werror,-Wsometimes-uninitialized]
If pwrap_write returns non-zero, pwrap_read will not be called to
initialize rdata, meaning that we will use some random uninitialized
stack value in our print statement. Zero initialize rdata in case this
happens.
Link: https://github.com/ClangBuiltLinux/linux/issues/401
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add the code to support the pwrap IP on the MediaTek MT8516 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
The variable rstc is set only when the SoC PWRAP have the
PWRAP_CAP_RESET capability. Check whether rstc is set before
using it to avoid errors.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
The rk3288 SoC has two PWM implementations available, the "old"
implementation and the "new" one. You can switch between the two of
them by flipping a bit in the grf.
The "old" implementation is the default at chip power up but isn't the
one that's officially supposed to be used. ...and, in fact, the
driver that gets selected in Linux using the rk3288 device tree only
supports the "new" implementation.
Long ago I tried to get a switch to the right IP block landed in the
PWM driver (search for "rk3288: Switch to use the proper PWM IP") but
that got rejected. In the mean time the grf has grown a full-fledged
driver that already sets other random bits like this. That means we
can now get the fix landed.
For those wondering how things could have possibly worked for the last
4.5 years, folks have mostly been relying on the bootloader to set
this bit. ...but occasionally folks have pointed back to my old patch
series [1] in downstream kernels.
[1] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1391597.html
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The return index value from bitmap_find_next_zero_area can be higher
than available slot. So correct the check to return error in such case.
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Andy Gross <agross@kernel.org>
|
|
During RTC-only suspend, power is lost to the wkup domain, so we need to
save and restore the state of that domain. We also need to store some
information within the RTC registers so that u-boot can do the right thing
at powerup.
The state is entered by getting the RTC to bring the pmic_power_en line low
which will instruct the PMIC to disable the appropriate power rails after
putting DDR into self-refresh mode. To bring pmic_power_en low, we need to
get an ALARM2 event. Since we are running from SRAM at that point, it means
calculating what the next second is (via ASM) and programming that into the
RTC. This patch also adds support for wake up source detection.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Move the am33xx_push_sram_idle function to the top as a preparation
for rtc+ddr mode as the function will be called by multiple functions
currently present before it.
No functional changes.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The memremap() function doesn't return error pointers, it returns NULL.
This code is returning "ret = PTR_ERR(NULL);" which is success, but it
should return -ENOMEM.
Fixes: 312416d9171a ("drivers: qcom: add command DB driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Current QMI clients are not userspace facing, if their threads are
signaled, they do not do any signal checking or propagate the
ERESTARTSYS return code up. Remove the interruptible option so clients
can finish their QMI transactions even if the thread is signaled.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
This change adds mmap functionality to rmtfs_mem driver.
Userspace application can map the address and use this
mapped address directly as buffer for read/write call to disk.
and avoid the read/write call to the shared path to copy the
buffer to userspace application.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Ankit Jain <jankit@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
By implementing the acquire/release protocol, the resets can be shared
with other drivers that also adhere to this protocol. This will be used
for example by the SOR driver to put hardware into a known good state,
irrespective of whether or not the power domain can be reset.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Replace explicit polling loop with a call to
regmap_read_poll_timeout() to avoid code repetition. Also fix
misspelled "failed" while at it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Chris Healy <cphealy@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This pull request brings in a build fix for arm64 with bcm2835
enabled, and fixes the driver in the presence of -EPROBE_DEFER.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Add an of_node_put when a tested device node is not available.
The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@
e = f(...);
... when != of_node_put(e)
when != x = e
when != e = x
when any
if (<+...of_device_is_available(e)...+>) {
... when != of_node_put(e)
(
return e;
|
+ of_node_put(e);
return ...;
)
}
// </smpl>
Fixes: a9daaba2965e8 ("soc: Add Amlogic SoC Information driver")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
