summaryrefslogtreecommitdiff
path: root/drivers/sh
AgeCommit message (Collapse)Author
2021-09-17maple: fix wrong return value of maple_bus_init().Lu Wei
If KMEM_CACHE or maple_alloc_dev failed, the maple_bus_init() will return 0 rather than error, because the retval is not changed after KMEM_CACHE or maple_alloc_dev failed. Fixes: 17be2d2b1c33 ("sh: Add maple bus support for the SEGA Dreamcast.") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Lu Wei <luwei32@huawei.com> Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Rich Felker <dalias@libc.org>
2021-08-05sh: superhyway: Simplify check in remove callbackUwe Kleine-König
The driver core only calls a remove callback when the device was successfully bound (aka probed) before. So dev->driver is never NULL. (And even if it was NULL, to_superhyway_driver(NULL) isn't ...) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210730191035.1455248-3-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: Make remove callback return voidUwe Kleine-König
The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-26Merge tag 'irq-core-2021-04-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The usual updates from the irq departement: Core changes: - Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can be cleaned up which either use a seperate mechanism to prevent auto-enable at request time or have a racy mechanism which disables the interrupt right after request. - Get rid of the last usage of irq_create_identity_mapping() and remove the interface. - An overhaul of tasklet_disable(). Most usage sites of tasklet_disable() are in task context and usually in cleanup, teardown code pathes. tasklet_disable() spinwaits for a tasklet which is currently executed. That's not only a problem for PREEMPT_RT where this can lead to a live lock when the disabling task preempts the softirq thread. It's also problematic in context of virtualization when the vCPU which runs the tasklet is scheduled out and the disabling code has to spin wait until it's scheduled back in. There are a few code pathes which invoke tasklet_disable() from non-sleepable context. For these a new disable variant which still spinwaits is provided which allows to switch tasklet_disable() to a sleep wait mechanism. For the atomic use cases this does not solve the live lock issue on PREEMPT_RT. That is mitigated by blocking on the RT specific softirq lock. - The PREEMPT_RT specific implementation of softirq processing and local_bh_disable/enable(). On RT enabled kernels soft interrupt processing happens always in task context and all interrupt handlers, which are not explicitly marked to be invoked in hard interrupt context are forced into task context as well. This allows to protect against softirq processing with a per CPU lock, which in turn allows to make BH disabled regions preemptible. Most of the softirq handling code is still shared. The RT/non-RT specific differences are addressed with a set of inline functions which provide the context specific functionality. The local_bh_disable() / local_bh_enable() mechanism are obviously seperate. - The usual set of small improvements and cleanups Driver changes: - New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt controllers - Extended functionality for MStar, STM32 and SC7280 irq chips - Enhanced robustness for ARM GICv3/4.1 drivers - The usual set of cleanups and improvements all over the place" * tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) irqchip/xilinx: Expose Kconfig option for Zynq/ZynqMP irqchip/gic-v3: Do not enable irqs when handling spurious interrups dt-bindings: interrupt-controller: Add IDT 79RC3243x Interrupt Controller irqchip: Add support for IDT 79rc3243x interrupt controller irqdomain: Drop references to recusive irqdomain setup irqdomain: Get rid of irq_create_strict_mappings() irqchip/jcore-aic: Kill use of irq_create_strict_mappings() ARM: PXA: Kill use of irq_create_strict_mappings() irqchip/gic-v4.1: Disable vSGI upon (GIC CPUIF < v4.1) detection irqchip/tb10x: Use 'fallthrough' to eliminate a warning genirq: Reduce irqdebug cacheline bouncing kernel: Initialize cpumask before parsing irqchip/wpcm450: Drop COMPILE_TEST irqchip/irq-mst: Support polarity configuration irqchip: Add driver for WPCM450 interrupt controller dt-bindings: interrupt-controller: Add nuvoton, wpcm450-aic dt-bindings: qcom,pdc: Add compatible for sc7280 irqchip/stm32: Add usart instances exti direct event support irqchip/gic-v3: Fix OF_BAD_ADDR error handling irqchip/sifive-plic: Mark two global variables __ro_after_init ...
2021-04-07sh: intc: Drop the use of irq_create_identity_mapping()Marc Zyngier
Instead of playing games with using irq_create_identity_mapping() and irq_domain_associate(), drop the use of the former and only use the latter, together with the allocation of the irq_desc as needed. It doesn't make the code less awful, but at least the intent is clearer. Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-06sh/intc: Restore devm_ioremap() alignmentGeert Uytterhoeven
Restore alignment of the continuation of the devm_ioremap() call in register_intc_controller(). Fixes: 4bdc0d676a643140 ("remove ioremap_nocache and devm_ioremap_nocache") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rich Felker <dalias@libc.org>
2021-01-06sh: intc: Convert to DEFINE_SHOW_ATTRIBUTEQinglang Miao
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Rich Felker <dalias@libc.org>
2020-08-14iomap: constify ioreadX() iomem argument (as in generic implementation)Krzysztof Kozlowski
Patch series "iomap: Constify ioreadX() iomem argument", v3. The ioread8/16/32() and others have inconsistent interface among the architectures: some taking address as const, some not. It seems there is nothing really stopping all of them to take pointer to const. This patch (of 4): The ioreadX() and ioreadX_rep() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. [krzk@kernel.org: sh: clk: fix assignment from incompatible pointer type for ioreadX()] Link: http://lkml.kernel.org/r/20200723082017.24053-1-krzk@kernel.org [akpm@linux-foundation.org: fix drivers/mailbox/bcm-pdc-mailbox.c] Link: http://lkml.kernel.org/r/202007132209.Rxmv4QyS%25lkp@intel.com Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Allen Hubbe <allenbh@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Link: http://lkml.kernel.org/r/20200709072837.5869-1-krzk@kernel.org Link: http://lkml.kernel.org/r/20200709072837.5869-2-krzk@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14sh: clkfwk: remove r8/r16/r32Kuninori Morimoto
SH will get below warning ${LINUX}/drivers/sh/clk/cpg.c: In function 'r8': ${LINUX}/drivers/sh/clk/cpg.c:41:17: warning: passing argument 1 of 'ioread8' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] return ioread8(addr); ^~~~ In file included from ${LINUX}/arch/sh/include/asm/io.h:21, from ${LINUX}/include/linux/io.h:13, from ${LINUX}/drivers/sh/clk/cpg.c:14: ${LINUX}/include/asm-generic/iomap.h:29:29: note: expected 'void *' but argument is of type 'const void *' extern unsigned int ioread8(void __iomem *); ^~~~~~~~~~~~~~ We don't need "const" for r8/r16/r32. And we don't need r8/r16/r32 themselvs. This patch cleanup these. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Modra <amodra@gmail.com> Cc: Bin Meng <bin.meng@windriver.com> Cc: Chen Zhou <chenzhou10@huawei.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: Romain Naour <romain.naour@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> X-MARC-Message: https://marc.info/?l=linux-renesas-soc&m=157852973916903 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-10-18sh/intc: Use pr_warn instead of pr_warningKefeng Wang
As said in commit f2c2cbcc35d4 ("powerpc: Use pr_warn instead of pr_warning"), removing pr_warning so all logging messages use a consistent <prefix>_warn style. Let's do it. Link: http://lkml.kernel.org/r/20191018031850.48498-22-wangkefeng.wang@huawei.com To: linux-kernel@vger.kernel.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14treewide: replace #include <asm/sizes.h> with #include <linux/sizes.h>Masahiro Yamada
Since commit dccd2304cc90 ("ARM: 7430/1: sizes.h: move from asm-generic to <linux/sizes.h>"), <asm/sizes.h> and <asm-generic/sizes.h> are just wrappers of <linux/sizes.h>. This commit replaces all <asm/sizes.h> and <asm-generic/sizes.h> to prepare for the removal. Link: http://lkml.kernel.org/r/1553267665-27228-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-02sh: introduce a sh_cacheop_vaddr helperChristoph Hellwig
And use it in the maple bus code to avoid a dma API dependency. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-02-08cpufreq: Add and use cpufreq_for_each_{valid_,}entry_idx()Dominik Brodowski
Pointer subtraction is slow and tedious. Therefore, replace all instances where cpufreq_for_each_{valid_,}entry loops contained such substractions with an iteration macro providing an index to the frequency_table entry. Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Link: http://lkml.kernel.org/r/20180120020237.GM13338@ZenIV.linux.org.uk Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-14Merge tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - turn dma_cache_sync into a dma_map_ops instance and remove implementation that purely are dead because the architecture doesn't support noncoherent allocations - add a flag for busses that need DMA configuration (Robin Murphy) * tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: turn dma_cache_sync into a dma_map_ops method sh: make dma_cache_sync a no-op xtensa: make dma_cache_sync a no-op unicore32: make dma_cache_sync a no-op powerpc: make dma_cache_sync a no-op mn10300: make dma_cache_sync a no-op microblaze: make dma_cache_sync a no-op ia64: make dma_cache_sync a no-op frv: make dma_cache_sync a no-op x86: make dma_cache_sync a no-op floppy: consolidate the dummy fd_cacheflush definition drivers: flag buses which demand DMA configuration
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19sh: make dma_cache_sync a no-opChristoph Hellwig
sh does not implement DMA_ATTR_NON_CONSISTENT allocations, so it doesn't make any sense to do any work in dma_cache_sync given that it must be a no-op when dma_alloc_attrs returns coherent memory. On the other hand sh uses dma_cache_sync internally in the dma_ops implementation and for the maple bus that does not use the DMA API, so a the old functionality for dma_cache_sync is still provided under the name sh_sync_dma_for_device, and without the redundant dev argument. While at it two of the syncing dma_ops also go the proper _for_device postfix. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2017-07-06drivers/sh/intc/virq.c: delete an error message for a failed memory ↵SF Markus Elfring
allocation in add_virq_to_pirq() This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Link: http://lkml.kernel.org/r/54e30d61-5183-9911-cf35-1410fb78da5a@users.sourceforge.net Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-09sh: superhyway: use dev_groups and not dev_attrs for bus_typeGreg Kroah-Hartman
The dev_attrs field has long been "depreciated" and is finally being removed, so move the driver to use the "correct" dev_groups field instead for struct bus_type. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <linux-sh@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-12lib: radix-tree: check accounting of existing slot replacement usersJohannes Weiner
The bug in khugepaged fixed earlier in this series shows that radix tree slot replacement is fragile; and it will become more so when not only NULL<->!NULL transitions need to be caught but transitions from and to exceptional entries as well. We need checks. Re-implement radix_tree_replace_slot() on top of the sanity-checked __radix_tree_replace(). This requires existing callers to also pass the radix tree root, but it'll warn us when somebody replaces slots with contents that need proper accounting (transitions between NULL entries, real entries, exceptional entries) and where a replacement through the slot pointer would corrupt the radix tree node counts. Link: http://lkml.kernel.org/r/20161117193021.GB23430@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-30drivers: sh: Stop using the legacy clock domain on ARMGeert Uytterhoeven
Since commits 71d076ceb245f0d9 ("ARM: shmobile: Enable PM and PM_GENERIC_DOMAINS for SoCs with PM Domains") and 2ee98234b88174f2 ("arm64: renesas: Enable PM and PM_GENERIC_DOMAINS for SoCs with PM Domains"), CONFIG_PM and CONFIG_PM_GENERIC_DOMAINS are enabled unconditionally for Renesas ARM-based SoCs. Hence the legacy clock domain is no longer used on these SoCs. Remove the related support code, and stop entering drivers/sh/ on ARM. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-03-04Merge tag 'v4.5-rc6' into core/resources, to resolve conflictIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-25drivers: sh: Restore legacy clock domain on SuperH platformsGeert Uytterhoeven
CONFIG_ARCH_SHMOBILE is not only enabled for Renesas ARM platforms (which are DT based and multi-platform), but also on a select set of Renesas SuperH platforms (SH7722/SH7723/SH7724/SH7343/SH7366). Hence since commit 0ba58de231066e47 ("drivers: sh: Get rid of CONFIG_ARCH_SHMOBILE_MULTI"), the legacy clock domain is no longer installed on these SuperH platforms, and module clocks may not be enabled when needed, leading to driver failures. To fix this, add an additional check for CONFIG_OF. Fixes: 0ba58de231066e47 ("drivers: sh: Get rid of CONFIG_ARCH_SHMOBILE_MULTI"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-30drivers: Initialize resource entry to zeroToshi Kani
I/O resource descriptor, 'desc' in struct resource, needs to be initialized to zero by default. Some drivers call kmalloc() to allocate a resource entry, but do not initialize it to zero by memset(). Change these drivers to call kzalloc(), instead. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Acked-by: Helge Deller <deller@gmx.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-acpi@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-mm <linux-mm@kvack.org> Cc: linux-parisc@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-sh@vger.kernel.org Link: http://lkml.kernel.org/r/1453841853-11383-10-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-11-24drivers: sh: clk: Avoid crashes when passing NULL clocksGeert Uytterhoeven
Several clock API functions handle NULL clocks when the Common Clock Framework is used, while their legacy SH counterparts don't, and would just crash when a NULL clock is passed. Add NULL checks to clk_get_rate(), clk_set_rate(), clk_get_parent(), and clk_round_rate(), to avoid different behavior in drivers shared between legacy and CCF-based platforms. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-24drivers: sh: clk: Remove obsolete and unused clk_round_parent()Geert Uytterhoeven
clk_round_parent() was only ever used by AP4EVB, until commit b24bd7e97b3784af ("ARM: shmobile: Remove AP4EVB board support"). The Common Clock Framework does not provide clk_round_parent(), hence remove it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-17drivers: sh: Get rid of CONFIG_ARCH_SHMOBILE_MULTIGeert Uytterhoeven
Shmobile is all multiplatform these days, so get rid of the reference to CONFIG_ARCH_SHMOBILE_MULTI. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-09-21Merge tag 'renesas-sh-drivers-for-v4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas Pull SH drivers updates from Simon Horman: "I am sending this change after v4.3-rc1 has been released as it depends on SoC changes which are present in that rc release. Summary: - disable PM runtime for multi-platform ARM with genpd - disable legacy default PM Domain on emev2" * tag 'renesas-sh-drivers-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: drivers: sh: Disable PM runtime for multi-platform ARM with genpd drivers: sh: Disable legacy default PM Domain on emev2
2015-09-16sh: Kill off set_irq_flags usageRob Herring
set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also modify IRQ_NOPROBE and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Simon Horman <horms@verge.net.au> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sh@vger.kernel.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/1440889285-5637-4-git-send-email-robh@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-14drivers: sh: Disable PM runtime for multi-platform ARM with genpdGeert Uytterhoeven
If the default PM Domain using PM_CLK is used for PM runtime, the real Clock Domain cannot be registered from DT later. Hence do not enable it when running a multi-platform kernel with genpd support on R-Car or RZ. The CPG/MSTP Clock Domain driver will take care of PM runtime management of the module clocks. Now most multi-platform ARM shmobile platforms (SH-Mobile, R-Mobile, R-Car, RZ) use DT-based PM Domains to take care of PM runtime management of the module clocks, simplify the platform logic by replacing the explicit SoC checks by a single check for the presence of MSTP clocks in DT. Backwards-compatiblity with old DTs (mainly for R-Car Gen2) is provided by checking for the presence of a "#power-domain-cells" property in DT. The default PM Domain is still needed for: - backwards-compatibility with old DTs that lack PM Domain properties, - the CONFIG_PM=n case, - legacy (non-DT) ARM/shmobile platforms without genpd support (r8a7778, r8a7779), - legacy SuperH. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-09-14drivers: sh: Disable legacy default PM Domain on emev2Geert Uytterhoeven
EMMA Mobile EV2 doesn't have MSTP clocks. All its device drivers manage clocks explicitly, without relying on Runtime PM, so it doesn't need the legacy default PM Domain. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-07-29sh/intc: Prepare irq flow handlers for irq argument removalThomas Gleixner
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Link: http://lkml.kernel.org/r/20150713151626.872605327@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-29sh/intc: Use irq_desc_get_xxx() to avoid redundant lookup of irq_descJiang Liu
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Also replace generic_handle_irq with generic_handle_irq_desc() to avoid looking up irq_desc again. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20150713151626.792845830@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-29sh/irq: Use access helper irq_data_get_affinity_mask()Thomas Gleixner
This is a preparatory patch for moving irq_data struct members. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20150713151626.713278346@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-29sh/irq: Use irq accessor functions instead of open coded accessJiang Liu
This is a preparatory patch for refactoring the internals if irq_data. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20150713151626.616384365@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-01Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "This contains: - a series of fixes for interrupt drivers to prevent a potential race when installing a chained interrupt handler - a fix for cpumask pointer misuse - a fix for using the wrong interrupt number from struct irq_data - removal of unused code and outdated comments - a few new helper functions which allow us to cleanup the interrupt handling code further in 4.3 I decided against doing the cleanup at the end of this merge window and rather do the preparatory steps for 4.3, so we can run the final ABI change at the end of the 4.3 merge window with less risk" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) ARM/LPC32xx: Use irq not hwirq for __irq_set_handler_locked() genirq: Implement irq_set_handler_locked()/irq_set_chip_handler_name_locked() genirq: Introduce helper irq_desc_get_irq() genirq: Remove irq_node() genirq: Clean up outdated comments related to include/linux/irqdesc.h mn10300: Fix incorrect use of irq_data->affinity MIPS/ralink: Fix race in installing chained IRQ handler MIPS/pci: Fix race in installing chained IRQ handler MIPS/ath25: Fix race in installing chained IRQ handler MIPS/ath25: Fix race in installing chained IRQ handler m68k/psc: Fix race in installing chained IRQ handler avr32/at32ap: Fix race in installing chained IRQ handler sh/intc: Fix race in installing chained IRQ handler sh/intc: Fix potential race in installing chained IRQ handler pinctrl/sun4i: Fix race in installing chained IRQ handler pinctrl/samsung: Fix race in installing chained IRQ handler pinctrl/samsung: Fix race in installing chained IRQ handler pinctrl/exynos: Fix race in installing chained IRQ handler pinctrl/st: Fix race in installing chained IRQ handler pinctrl/adi2: Fix race in installing chained IRQ handler ...
2015-06-25sh/intc: Fix race in installing chained IRQ handlerThomas Gleixner
Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Search and conversion was done with coccinelle: @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); | -irq_set_chained_handler(E1, E3); ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); ... | -irq_set_chained_handler(E1, E3); ... ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: linux-sh@vger.kernel.org
2015-06-25sh/intc: Fix potential race in installing chained IRQ handlerThomas Gleixner
Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by moving the call to irq_set_chained_handler() after the function which sets up the handler data. Found by code inspection. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: linux-sh@vger.kernel.org
2015-05-12drivers: sh: remove boilerplate code and use USE_PM_CLK_RUNTIME_OPSRajendra Nayak
USE_PM_CLK_RUNTIME_OPS is introduced so we don't repeat the same code to do runtime_suspend and runtime_resume across users of PM clocks. Use it to remove the boilerplate code. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-27drivers: sh: Remove test for now unsupported sh7372Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-04-27drivers: sh: Disable PM runtime for multi-platform r8a73a4 with genpdGeert Uytterhoeven
If the default PM domain using PM_CLK is used for PM runtime, the real PM domain(s) cannot be registered from DT later. Hence do not enable it when running a multi-platform kernel with genpd support on an r8a73a4. The R-Mobile PM domain driver will take care of PM runtime management of the module clocks. The default PM domain is still needed for: - platforms without genpd support, - the legacy (non-DT) case, where genpd may take over later, except for the C5 "always on" PM domain. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-04-27drivers: sh: Disable PM runtime for multi-platform sh73a0 with genpdGeert Uytterhoeven
If the default PM domain using PM_CLK is used for PM runtime, the real PM domain(s) cannot be registered from DT later. Hence do not enable it when running a multi-platform kernel with genpd support on an sh73a0. The R-Mobile PM domain driver will take care of PM runtime management of the module clocks. The default PM domain is still needed for: - platforms without genpd support, - the legacy (non-DT) case, where genpd may take over later, except for the C5 "always on" PM domain. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24drivers: sh: Disable PM runtime for multi-platform r8a7740 with genpdGeert Uytterhoeven
If the default PM domain using PM_CLK is used for PM runtime, the real PM domain(s) cannot be registered from DT later. Hence do not enable it when running a multi-platform kernel with genpd support on an r8a7740. The R-Mobile PM domain driver will take care of PM runtime management of the module clocks. The default PM domain is still needed for: - platforms without genpd support, - the legacy (non-DT) case, where genpd may take over later, except for the C5 "always on" PM domain. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-05drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM in drivers/sh/pm_runtime.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2014-09-09drivers: sh: Leave disabling of unused PM domains to genpdUlf Hansson
Since genpd at late init, will try to disable unused PM domains we don't need to do it from here as well. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-22sh: intc: Confine SH_INTC to platforms that need itGeert Uytterhoeven
Currently the sh-intc driver is compiled on all SuperH and non-multiplatform SH-Mobile platforms, while it's only used on a limited number of platforms: - SuperH: SH2(A), SH3(A), SH4(A)(L) (all but SH5) - ARM: sh7372, sh73a0 Drop the "default y" on SH_INTC, make all CPU platforms that use it select it, and protect all sub-options by "if SH_INTC" to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-23 13:07:22 +0000