summaryrefslogtreecommitdiff
path: root/drivers/scsi/libsas
AgeCommit message (Collapse)Author
2021-08-11scsi: libsas: Use scsi_cmd_to_rq() instead of scsi_cmnd.requestBart Van Assche
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-27-bvanassche@acm.org Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: libsas: Drop BLK_DEV_BSGLIB selectionGuoqing Jiang
SCSI_SAS_ATTRS already selects BLK_DEV_BSGLIB in drivers/scsi/Kconfig. Remove selection in libsas/Kconfig. Link: https://lore.kernel.org/r/20210723084624.2596297-1-guoqing.jiang@linux.dev Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-20scsi: libsas: Allow libsas to include SCSI header files directlyJason Yan
libsas needs to include some header files in the scsi directory. However these are currently hardcoded with the path "../" in the C files. Do this in the Makefile to avoid hardcoding the path. Link: https://lore.kernel.org/r/20210716074551.771312-1-yanaijie@huawei.com Cc: John Garry <john.garry@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-13scsi: libsas: Fix fall-through warning for ClangGustavo A. R. Silva
Fix the following fallthrough warning (arm64-randconfig with Clang): drivers/scsi/libsas/sas_discover.c:467:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/60edca25.k00ut905IFBjPyt5%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-07-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "This is a set of minor fixes and clean ups in the core and various drivers. The only core change in behaviour is the I/O retry for spinup notify, but that shouldn't impact anything other than the failing case" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits) scsi: virtio_scsi: Add validation for residual bytes from response scsi: ipr: System crashes when seeing type 20 error scsi: core: Retry I/O for Notify (Enable Spinup) Required error scsi: mpi3mr: Fix warnings reported by smatch scsi: qedf: Add check to synchronize abort and flush scsi: MAINTAINERS: Add mpi3mr driver maintainers scsi: libfc: Fix array index out of bound exception scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro scsi: qedf: Use DEVICE_ATTR_RO() macro scsi: qedi: Use DEVICE_ATTR_RO() macro scsi: message: mptfc: Switch from pci_ to dma_ API scsi: be2iscsi: Fix some missing space in some messages scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe() scsi: ufs: Fix build warning without CONFIG_PM scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment scsi: qla2xxx: Add heartbeat check scsi: virtio_scsi: Do not overwrite SCSI status scsi: libsas: Add LUN number check in .slave_alloc callback scsi: core: Inline scsi_mq_alloc_queue() ...
2021-07-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, ibmvfc, megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with elx and mpi3mr being new drivers. The major core change is a rework to drop the status byte handling macros and the old bit shifted definitions and the rest of the updates are minor fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits) scsi: aha1740: Avoid over-read of sense buffer scsi: arcmsr: Avoid over-read of sense buffer scsi: ips: Avoid over-read of sense buffer scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe() scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame() scsi: elx: libefc: Fix less than zero comparison of a unsigned int scsi: elx: efct: Fix pointer error checking in debugfs init scsi: elx: efct: Fix is_originator return code type scsi: elx: efct: Fix link error for _bad_cmpxchg scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel() scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session() scsi: elx: efct: Fix error handling in efct_hw_init() scsi: elx: efct: Remove redundant initialization of variable lun scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected" scsi: lpfc: Fix build error in lpfc_scsi.c scsi: target: iscsi: Remove redundant continue statement scsi: qla4xxx: Remove redundant continue statement scsi: ppa: Switch to use module_parport_driver() scsi: imm: Switch to use module_parport_driver() scsi: mpt3sas: Fix error return value in _scsih_expander_add() ...
2021-06-22scsi: libsas: Add LUN number check in .slave_alloc callbackYufen Yu
Offlining a SATA device connected to a hisi SAS controller and then scanning the host will result in detecting 255 non-existent devices: # lsscsi [2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda [2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb [2:0:2:0] disk SEAGATE ST600MM0006 B001 /dev/sdc # echo "offline" > /sys/block/sdb/device/state # echo "- - -" > /sys/class/scsi_host/host2/scan # lsscsi [2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda [2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb [2:0:1:1] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdh ... [2:0:1:255] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdjb After a REPORT LUN command issued to the offline device fails, the SCSI midlayer tries to do a sequential scan of all devices whose LUN number is not 0. However, SATA does not support LUN numbers at all. Introduce a generic sas_slave_alloc() handler which will return -ENXIO for SATA devices if the requested LUN number is larger than 0 and make libsas drivers use this function as their .slave_alloc callback. Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com Reported-by: Wu Bo <wubo40@huawei.com> Suggested-by: John Garry <john.garry@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: libsas: Introduce more SAM status code aliases in enum exec_statusBart Van Assche
This patch prepares for converting SAM status codes into an enum. Without this patch converting SAM status codes into an enumeration type would trigger complaints about enum type mismatches for the SAS code. Link: https://lore.kernel.org/r/20210524025457.11299-2-bvanassche@acm.org Cc: Hannes Reinecke <hare@suse.com> Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-21scsi: libsas: Use _safe() loop in sas_resume_port()Dan Carpenter
If sas_notify_lldd_dev_found() fails then this code calls: sas_unregister_dev(port, dev); which removes "dev", our list iterator, from the list. This could lead to an endless loop. We need to use list_for_each_entry_safe(). Link: https://lore.kernel.org/r/YKUeq6gwfGcvvhty@mwanda Fixes: 303694eeee5e ("[SCSI] libsas: suspend / resume support") Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, target, tcmu, smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx). The major core change is using a sbitmap instead of an atomic for queue tracking" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits) scsi: target: tcm_fc: Fix a kernel-doc header scsi: target: Shorten ALUA error messages scsi: target: Fix two format specifiers scsi: target: Compare explicitly with SAM_STAT_GOOD scsi: sd: Introduce a new local variable in sd_check_events() scsi: dc395x: Open-code status_byte(u8) calls scsi: 53c700: Open-code status_byte(u8) calls scsi: smartpqi: Remove unused functions scsi: qla4xxx: Remove an unused function scsi: myrs: Remove unused functions scsi: myrb: Remove unused functions scsi: mpt3sas: Fix two kernel-doc headers scsi: fcoe: Suppress a compiler warning scsi: libfc: Fix a format specifier scsi: aacraid: Remove an unused function scsi: core: Introduce enum scsi_disposition scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case scsi: core: Rename scsi_softirq_done() into scsi_complete() scsi: core: Remove an incorrect comment scsi: core: Make the scsi_alloc_sgtables() documentation more accurate ...
2021-04-07scsi: libsas: Reset num_scatter if libata marks qc as NODATAJolly Shah
When the cache_type for the SCSI device is changed, the SCSI layer issues a MODE_SELECT command. The caching mode details are communicated via a request buffer associated with the SCSI command with data direction set as DMA_TO_DEVICE (scsi_mode_select()). When this command reaches the libata layer, as a part of generic initial setup, libata layer sets up the scatterlist for the command using the SCSI command (ata_scsi_qc_new()). This command is then translated by the libata layer into ATA_CMD_SET_FEATURES (ata_scsi_mode_select_xlat()). The libata layer treats this as a non-data command (ata_mselect_caching()), since it only needs an ATA taskfile to pass the caching on/off information to the device. It does not need the scatterlist that has been setup, so it does not perform dma_map_sg() on the scatterlist (ata_qc_issue()). Unfortunately, when this command reaches the libsas layer (sas_ata_qc_issue()), libsas layer sees it as a non-data command with a scatterlist. It cannot extract the correct DMA length since the scatterlist has not been mapped with dma_map_sg() for a DMA operation. When this partially constructed SAS task reaches pm80xx LLDD, it results in the following warning: "pm80xx_chip_sata_req 6058: The sg list address start_addr=0x0000000000000000 data_len=0x0end_addr_high=0xffffffff end_addr_low=0xffffffff has crossed 4G boundary" Update libsas to handle ATA non-data commands separately so num_scatter and total_xfer_len remain 0. Link: https://lore.kernel.org/r/20210318225632.2481291-1-jollys@google.com Fixes: 53de092f47ff ("scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA") Tested-by: Luo Jiaxing <luojiaxing@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Jolly Shah <jollys@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-06scsi: libsas: Clean up whitespaceLuo Jiaxing
checkpatch reported several whitespace errors. Fix them all. Link: https://lore.kernel.org/r/1616675396-6108-3-git-send-email-luojiaxing@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: libsas: Correctly indent statements in sas_to_ata_err()Luo Jiaxing
checkpatch reported an error in sas_to_ata_err(). switch and case statements are incorrectly indented. Link: https://lore.kernel.org/r/1616675396-6108-2-git-send-email-luojiaxing@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: libsas: Remove temporarily-added _gfp() API variantsAhmed S. Darwish
These variants were added for bisectability. Remove them, as all call sites have now been convertd to use the original API. Link: https://lore.kernel.org/r/20210118100955.1761652-20-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: libsas: Switch back to original event notifiers APIAhmed S. Darwish
libsas event notifiers required an extension where gfp_t flags must be explicitly passed. For bisectability, a temporary _gfp() variant of such functions were added. All call sites then got converted use the _gfp() variants and explicitly pass GFP context. Having no callers left, the original libsas notifiers were then modified to accept gfp_t flags by default. Switch back to the original event notifiers API, while still passing GFP context. The _gfp() notifier variants will be removed afterwards. Link: https://lore.kernel.org/r/20210118100955.1761652-17-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: libsas: Add gfp_t flags parameter to event notificationsAhmed S. Darwish
All call-sites of below libsas APIs: - sas_alloc_event() - sas_notify_port_event() - sas_notify_phy_event() have been converted to use the _gfp()-suffixed version. Modify the original APIs above to take a gfp_t flags parameter by default. For bisectability, call-sites will be modified again to use the original libsas APIs (while passing gfp_t). The temporary _gfp()-suffixed versions can then be removed. Link: https://lore.kernel.org/r/20210118100955.1761652-13-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: libsas: Pass gfp_t flags to event notifiersAhmed S. Darwish
Use the new libsas event notifiers API, which requires callers to explicitly pass the gfp_t memory allocation flags. Context analysis: - sas_enable_revalidation(): process, acquires mutex - sas_resume_ha(): process, calls wait_event_timeout() Link: https://lore.kernel.org/r/20210118100955.1761652-9-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: libsas: Introduce a _gfp() variant of event notifiersAhmed S. Darwish
sas_alloc_event() uses in_interrupt() to decide which allocation should be used. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. The in_interrupt() check is also only partially correct, because it fails to choose the correct code path when just preemption or interrupts are disabled. For example, as in the following call chain: mvsas/mv_sas.c: mvs_work_queue() [process context] spin_lock_irqsave(mvs_info::lock, ) -> libsas/sas_event.c: sas_notify_phy_event() -> sas_alloc_event() -> in_interrupt() = false -> invalid GFP_KERNEL allocation -> libsas/sas_event.c: sas_notify_port_event() -> sas_alloc_event() -> in_interrupt() = false -> invalid GFP_KERNEL allocation Introduce sas_alloc_event_gfp(), sas_notify_port_event_gfp(), and sas_notify_phy_event_gfp(), which all behave like the non _gfp() variants but use a caller-passed GFP mask for allocations. For bisectability, all callers will be modified first to pass GFP context, then the non _gfp() libsas API variants will be modified to take a gfp_t by default. Link: https://lore.kernel.org/r/20210118100955.1761652-4-a.darwish@linutronix.de Fixes: 1c393b970e0f ("scsi: libsas: Use dynamic alloced work to avoid sas event lost") Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: libsas: Remove notifier indirectionJohn Garry
LLDDs report events to libsas with .notify_port_event and .notify_phy_event callbacks. These callbacks are fixed and so there is no reason why the functions cannot be called directly, so do that. This neatens the code slightly, makes it more obvious, and reduces function pointer usage, which is generally a good thing. Downside is that there are 2x more symbol exports. [a.darwish@linutronix.de: Remove the now unused "sas_ha" local variables] Link: https://lore.kernel.org/r/20210118100955.1761652-3-a.darwish@linutronix.de Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes. There are only three core changes: adding sense codes, cleaning up noretry and adding an option for limitless retries" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits) scsi: hisi_sas: Recover PHY state according to the status before reset scsi: hisi_sas: Filter out new PHY up events during suspend scsi: hisi_sas: Add device link between SCSI devices and hisi_hba scsi: hisi_sas: Add check for methods _PS0 and _PR0 scsi: hisi_sas: Add controller runtime PM support for v3 hw scsi: hisi_sas: Switch to new framework to support suspend and resume scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq() scsi: qedf: Remove redundant assignment to variable 'rc' scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store() scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed scsi: sun_esp: Use module_platform_driver to simplify the code scsi: sun3x_esp: Use module_platform_driver to simplify the code scsi: sni_53c710: Use module_platform_driver to simplify the code scsi: qlogicpti: Use module_platform_driver to simplify the code scsi: mac_esp: Use module_platform_driver to simplify the code scsi: jazz_esp: Use module_platform_driver to simplify the code scsi: mvumi: Fix error return in mvumi_io_attach() scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req() scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs() ...
2020-09-22scsi: libsas: Simplify the return expression of sas_discover_* functionsLiu Shixin
Simplify the return expression. Link: https://lore.kernel.org/r/20200921134558.3478922-1-liushixin2@huawei.com Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-15Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "Just one fix in libsas for a resource leak in an error path" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libsas: Fix error path in sas_notify_lldd_dev_found()
2020-09-09scsi: libsas: Fix error path in sas_notify_lldd_dev_found()Dan Carpenter
In sas_notify_lldd_dev_found(), if we can't allocate the necessary resources, then it seems like the wrong thing to mark the device as found and to increment the reference count. None of the callers ever drop the reference in that situation. [mkp: tweaked commit desc based on feedback from John] Link: https://lore.kernel.org/r/20200905125836.GF183976@mwanda Fixes: 735f7d2fedf5 ("[SCSI] libsas: fix domain_device leak") Reviewed-by: Jason Yan <yanaijie@huawei.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-08Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Eleven fixes, mostly in drivers or minor fixes in driver related infrastructure libraries (target, libfc and libsas). Most of the bugs fixed only show up under rare circumstances, the exception being the endianness problem in qla2xxx which is used as a device on some sparc systems" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mpt3sas: Don't call disable_irq from IRQ poll handler scsi: megaraid_sas: Don't call disable_irq from process IRQ poll scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA scsi: target: iscsi: Fix data digest calculation scsi: lpfc: Update lpfc version to 12.8.0.4 scsi: lpfc: Extend the RDF FPIN Registration descriptor for additional events scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery scsi: lpfc: Fix setting IRQ affinity with an empty CPU mask scsi: qla2xxx: Fix regression on sparc64 scsi: libfc: Fix for double free() scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort
2020-09-01scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATALuo Jiaxing
It was discovered that sdparm will fail when attempting to disable write cache on a SATA disk connected via libsas. In the ATA command set the write cache state is controlled through the SET FEATURES operation. This is roughly corresponds to MODE SELECT in SCSI and the latter command is what is used in the SCSI-ATA translation layer. A subtle difference is that a MODE SELECT carries data whereas SET FEATURES is defined as a non-data command in ATA. Set the DMA data direction to DMA_NONE if the requested ATA command is identified as non-data. [mkp: commit desc] Fixes: fa1c1e8f1ece ("[SCSI] Add SATA support to libsas") Link: https://lore.kernel.org/r/1598426666-54544-1-git-send-email-luojiaxing@huawei.com Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-24scsi: libsas: Remove redundant assignment to variable resColin Ian King
The variable 'res' is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Link: https://lore.kernel.org/r/20200722154404.959267-1-colin.king@canonical.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Unused value")
2020-07-24scsi: libsas: Check link status in ATA prereset()Luo Jiaxing
libata currently attempts to reset even if the SATA disk is unplugged. To avoid the meaningless reset of a missing disk, libsas should report offline status to libata. libata already provides a .prereset callback for this purpose. This is called by ata_eh_reset() and can be used to influence whether a reset attempt should be made. Add sas_ata_preset callback to check status of phy and disk. If the disk is already offline or phy is disabled, we return -ENOENT to libata to avoid the reset. Link: https://lore.kernel.org/r/1595408643-63011-3-git-send-email-luojiaxing@huawei.com Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: libsas: Remove postreset from sas_sata_opsLuo Jiaxing
sas_sata_ops uses ata_std_postreset as .postreset callback. However, ata_std_postreset() calls sata_scr_read()/sata_scr_write() which need to access the ATA SCR register. This register not available in the libsas case and the functions always return -EOPNOTSUPP. Drop the .postreset callback. Link: https://lore.kernel.org/r/1595408643-63011-2-git-send-email-luojiaxing@huawei.com Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: libsas: Add missing annotation for sas_ata_qc_issue()Jules Irenge
Sparse reports a warning at sas_ata_qc_issue() warning: context imbalance in sas_ata_qc_issue() - unexpected unlock The root cause is the missing annotation at sas_ata_qc_issue() Add the missing __must_hold(ap->lock) annotation Link: https://lore.kernel.org/r/20200411001933.10072-7-jbi.octave@gmail.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26ata: make SATA_PMP option selectable only if any SATA host driver is enabledBartlomiej Zolnierkiewicz
There is no reason to expose SATA_PMP config option when no SATA host drivers are enabled. To fix it add SATA_HOST config option, make all SATA host drivers select it and finally make SATA_PMP config options depend on it. This also serves as preparation for the future changes which optimize libata core code size on PATA only setups. CC: "James E.J. Bottomley" <jejb@linux.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # for SCSI bits Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-21scsi: libsas: Tidy SAS address print formatJohn Garry
Currently we use a mixture of %016llx, %llx, and %16llx when printing a SAS address. Since the most significant nibble of the SAS address is always 5 - as per standard - this formatting is not so important; but some fake SAS addresses for SATA devices may not be. And we have mangled/invalid address to consider also. And it's better to be consistent in the code, so use a fixed format. The SAS address is a fixed size at 64b, so we want to 0 byte extend to 16 nibbles, so use %016llx globally. Also make some prints to be explicitly hex, and tidy some whitespace issue. Link: https://lore.kernel.org/r/1576758957-227350-1-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: libsas: stop discovering if oob mode is disconnectedJason Yan
The discovering of sas port is driven by workqueue in libsas. When libsas is processing port events or phy events in workqueue, new events may rise up and change the state of some structures such as asd_sas_phy. This may cause some problems such as follows: ==>thread 1 ==>thread 2 ==>phy up ==>phy_up_v3_hw() ==>oob_mode = SATA_OOB_MODE; ==>phy down quickly ==>hisi_sas_phy_down() ==>sas_ha->notify_phy_event() ==>sas_phy_disconnected() ==>oob_mode = OOB_NOT_CONNECTED ==>workqueue wakeup ==>sas_form_port() ==>sas_discover_domain() ==>sas_get_port_device() ==>oob_mode is OOB_NOT_CONNECTED and device is wrongly taken as expander This at last lead to the panic when libsas trying to issue a command to discover the device. [183047.614035] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [183047.622896] Mem abort info: [183047.625762] ESR = 0x96000004 [183047.628893] Exception class = DABT (current EL), IL = 32 bits [183047.634888] SET = 0, FnV = 0 [183047.638015] EA = 0, S1PTW = 0 [183047.641232] Data abort info: [183047.644189] ISV = 0, ISS = 0x00000004 [183047.648100] CM = 0, WnR = 0 [183047.651145] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000b7df67be [183047.657834] [0000000000000058] pgd=0000000000000000 [183047.662789] Internal error: Oops: 96000004 [#1] SMP [183047.667740] Process kworker/u16:2 (pid: 31291, stack limit = 0x00000000417c4974) [183047.675208] CPU: 0 PID: 3291 Comm: kworker/u16:2 Tainted: G W OE 4.19.36-vhulk1907.1.0.h410.eulerosv2r8.aarch64 #1 [183047.687015] Hardware name: N/A N/A/Kunpeng Desktop Board D920S10, BIOS 0.15 10/22/2019 [183047.695007] Workqueue: 0000:74:02.0_disco_q sas_discover_domain [183047.700999] pstate: 20c00009 (nzCv daif +PAN +UAO) [183047.705864] pc : prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw] [183047.711510] lr : prep_ata_v3_hw+0xb0/0x230 [hisi_sas_v3_hw] [183047.717153] sp : ffff00000f28ba60 [183047.720541] x29: ffff00000f28ba60 x28: ffff8026852d7228 [183047.725925] x27: ffff8027dba3e0a8 x26: ffff8027c05fc200 [183047.731310] x25: 0000000000000000 x24: ffff8026bafa8dc0 [183047.736695] x23: ffff8027c05fc218 x22: ffff8026852d7228 [183047.742079] x21: ffff80007c2f2940 x20: ffff8027c05fc200 [183047.747464] x19: 0000000000f80800 x18: 0000000000000010 [183047.752848] x17: 0000000000000000 x16: 0000000000000000 [183047.758232] x15: ffff000089a5a4ff x14: 0000000000000005 [183047.763617] x13: ffff000009a5a50e x12: ffff8026bafa1e20 [183047.769001] x11: ffff0000087453b8 x10: ffff00000f28b870 [183047.774385] x9 : 0000000000000000 x8 : ffff80007e58f9b0 [183047.779770] x7 : 0000000000000000 x6 : 000000000000003f [183047.785154] x5 : 0000000000000040 x4 : ffffffffffffffe0 [183047.790538] x3 : 00000000000000f8 x2 : 0000000002000007 [183047.795922] x1 : 0000000000000008 x0 : 0000000000000000 [183047.801307] Call trace: [183047.803827] prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw] [183047.809127] hisi_sas_task_prep+0x750/0x888 [hisi_sas_main] [183047.814773] hisi_sas_task_exec.isra.7+0x88/0x1f0 [hisi_sas_main] [183047.820939] hisi_sas_queue_command+0x28/0x38 [hisi_sas_main] [183047.826757] smp_execute_task_sg+0xec/0x218 [183047.831013] smp_execute_task+0x74/0xa0 [183047.834921] sas_discover_expander.part.7+0x9c/0x5f8 [183047.839959] sas_discover_root_expander+0x90/0x160 [183047.844822] sas_discover_domain+0x1b8/0x1e8 [183047.849164] process_one_work+0x1b4/0x3f8 [183047.853246] worker_thread+0x54/0x470 [183047.856981] kthread+0x134/0x138 [183047.860283] ret_from_fork+0x10/0x18 [183047.863931] Code: f9407a80 528000e2 39409281 72a04002 (b9405800) [183047.870097] kernel fault(0x1) notification starting on CPU 0 [183047.875828] kernel fault(0x1) notification finished on CPU 0 [183047.881559] Modules linked in: unibsp(OE) hns3(OE) hclge(OE) hnae3(OE) mem_drv(OE) hisi_sas_v3_hw(OE) hisi_sas_main(OE) [183047.892418] ---[ end trace 4cc26083fc11b783 ]--- [183047.897107] Kernel panic - not syncing: Fatal exception [183047.902403] kernel fault(0x5) notification starting on CPU 0 [183047.908134] kernel fault(0x5) notification finished on CPU 0 [183047.913865] SMP: stopping secondary CPUs [183047.917861] Kernel Offset: disabled [183047.921422] CPU features: 0x2,a2a00a38 [183047.925243] Memory Limit: none [183047.928372] kernel reboot(0x2) notification starting on CPU 0 [183047.934190] kernel reboot(0x2) notification finished on CPU 0 [183047.940008] ---[ end Kernel panic - not syncing: Fatal exception ]--- Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Link: https://lore.kernel.org/r/20191206011118.46909-1-yanaijie@huawei.com Reported-by: Gao Chuan <gaochuan4@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-20scsi: libsas: sas_discover: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: mtx1_defconfig mips): drivers/scsi/libsas/sas_discover.c: In function ‘sas_discover_domain’: ./include/linux/printk.h:309:2: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/libsas/sas_discover.c:459:3: note: in expansion of macro ‘pr_notice’ pr_notice("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n"); ^~~~~~~~~ drivers/scsi/libsas/sas_discover.c:462:2: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-07-20Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is the final round of mostly small fixes in our initial submit. It's mostly minor fixes and driver updates. The only change of note is adding a virt_boundary_mask to the SCSI host and host template to parametrise this for NVMe devices instead of having them do a call in slave_alloc. It's a fairly straightforward conversion except in the two NVMe handling drivers that didn't set it who now have a virtual infinity parameter added" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: megaraid_sas: set an unlimited max_segment_size scsi: mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs scsi: IB/srp: set virt_boundary_mask in the scsi host scsi: IB/iser: set virt_boundary_mask in the scsi host scsi: storvsc: set virt_boundary_mask in the scsi host template scsi: ufshcd: set max_segment_size in the scsi host template scsi: core: take the DMA max mapping size into account scsi: core: add a host / host template field for the virt boundary scsi: core: Fix race on creating sense cache scsi: sd_zbc: Fix compilation warning scsi: libfc: fix null pointer dereference on a null lport scsi: zfcp: fix GCC compiler warning emitted with -Wmaybe-uninitialized scsi: zfcp: fix request object use-after-free in send path causing wrong traces scsi: zfcp: fix request object use-after-free in send path causing seqno errors scsi: megaraid_sas: Update driver version to 07.710.50.00 scsi: megaraid_sas: Add module parameter for FW Async event logging scsi: megaraid_sas: Enable msix_load_balance for Invader and later controllers scsi: megaraid_sas: Fix calculation of target ID scsi: lpfc: reduce stack size with CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade ...
2019-07-11scsi: libsas: remove the exporting of sas_wait_ehDenis Efremov
The function sas_wait_eh is declared static and marked EXPORT_SYMBOL, which is at best an odd combination. Because the function is not used outside of the drivers/scsi/libsas/sas_scsi_host.c file it is defined in, this commit removes the EXPORT_SYMBOL() marking. Signed-off-by: Denis Efremov <efremov@linux.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs, mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the removal of the osst driver (I heard from Willem privately that he would like the driver removed because all his test hardware has failed). Plus number of minor changes, spelling fixes and other trivia. The big merge conflict this time around is the SPDX licence tags. Following discussion on linux-next, we believe our version to be more accurate than the one in the tree, so the resolution is to take our version for all the SPDX conflicts" Note on the SPDX license tag conversion conflicts: the SCSI tree had done its own SPDX conversion, which in some cases conflicted with the treewide ones done by Thomas & co. In almost all cases, the conflicts were purely syntactic: the SCSI tree used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the treewide conversion had used the new-style ones ("GPL-2.0-only" and "GPL-2.0-or-later"). In these cases I picked the new-style one. In a few cases, the SPDX conversion was actually different, though. As explained by James above, and in more detail in a pre-pull-request thread: "The other problem is actually substantive: In the libsas code Luben Tuikov originally specified gpl 2.0 only by dint of stating: * This file is licensed under GPLv2. In all the libsas files, but then muddied the water by quoting GPLv2 verbatim (which includes the or later than language). So for these files Christoph did the conversion to v2 only SPDX tags and Thomas converted to v2 or later tags" So in those cases, where the spdx tag substantially mattered, I took the SCSI tree conversion of it, but then also took the opportunity to turn the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag. Similarly, when there were whitespace differences or other differences to the comments around the copyright notices, I took the version from the SCSI tree as being the more specific conversion. Finally, in the spdx conversions that had no conflicts (because the treewide ones hadn't been done for those files), I just took the SCSI tree version as-is, even if it was old-style. The old-style conversions are perfectly valid, even if the "-only" and "-or-later" versions are perhaps more descriptive. * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits) scsi: qla2xxx: move IO flush to the front of NVME rport unregistration scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition scsi: qla2xxx: on session delete, return nvme cmd scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1 scsi: megaraid_sas: Introduce various Aero performance modes scsi: megaraid_sas: Use high IOPS queues based on IO workload scsi: megaraid_sas: Set affinity for high IOPS reply queues scsi: megaraid_sas: Enable coalescing for high IOPS queues scsi: megaraid_sas: Add support for High IOPS queues scsi: megaraid_sas: Add support for MPI toolbox commands scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD scsi: megaraid_sas: Handle sequence JBOD map failure at driver level scsi: megaraid_sas: Don't send FPIO to RL Bypass queue scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout scsi: megaraid_sas: Call disable_irq from process IRQ poll scsi: megaraid_sas: Remove few debug counters from IO path ...
2019-06-20scsi: libsas: aic94xx: hisi_sas: mvsas: pm8001: Use dev_is_expander()John Garry
Many times in libsas, and in LLDDs which use libsas, the check for an expander device is re-implemented or open coded. Use dev_is_expander() instead. We rename this from sas_dev_type_is_expander() to not spill so many lines in referencing. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: libsas: no need to join wide port again in sas_ex_discover_dev()Jason Yan
Since we are processing events synchronously now, the second call of sas_ex_join_wide_port() in sas_ex_discover_dev() is not needed. There will be no races with other works in disco workqueue. So remove the second sas_ex_join_wide_port(). I did not change the return value of 'res' to error when discover failed because we need to continue to discover other phys if one phy discover failed. So let's keep that logic as before and just add a debug log to detect the failure. And directly return if second fanout expander attatched to the parent expander because it has nothing to do after the phy is disabled. Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081036.435762997@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-02Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Six minor fixes to device drivers and one to the multipath alua handler. The most extensive fix is the zfcp port remove prevention one, but it's impact is only s390" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libsas: delete sas port if expander discover failed scsi: libsas: only clear phy->in_shutdown after shutdown event done scsi: scsi_dh_alua: Fix possible null-ptr-deref scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask scsi: zfcp: fix to prevent port_remove with pure auto scan LUNs (only sdevs) scsi: zfcp: fix missing zfcp_port reference put on -EBUSY from port_remove scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route()
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 167Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 83 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.021731668@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-29scsi: libsas: delete sas port if expander discover failedJason Yan
The sas_port(phy->port) allocated in sas_ex_discover_expander() will not be deleted when the expander failed to discover. This will cause resource leak and a further issue of kernel BUG like below: [159785.843156] port-2:17:29: trying to add phy phy-2:17:29 fails: it's already part of another port [159785.852144] ------------[ cut here ]------------ [159785.856833] kernel BUG at drivers/scsi/scsi_transport_sas.c:1086! [159785.863000] Internal error: Oops - BUG: 0 [#1] SMP [159785.867866] CPU: 39 PID: 16993 Comm: kworker/u96:2 Tainted: G W OE 4.19.25-vhulk1901.1.0.h111.aarch64 #1 [159785.878458] Hardware name: Huawei Technologies Co., Ltd. Hi1620EVBCS/Hi1620EVBCS, BIOS Hi1620 CS B070 1P TA 03/21/2019 [159785.889231] Workqueue: 0000:74:02.0_disco_q sas_discover_domain [159785.895224] pstate: 40c00009 (nZcv daif +PAN +UAO) [159785.900094] pc : sas_port_add_phy+0x188/0x1b8 [159785.904524] lr : sas_port_add_phy+0x188/0x1b8 [159785.908952] sp : ffff0001120e3b80 [159785.912341] x29: ffff0001120e3b80 x28: 0000000000000000 [159785.917727] x27: ffff802ade8f5400 x26: ffff0000681b7560 [159785.923111] x25: ffff802adf11a800 x24: ffff0000680e8000 [159785.928496] x23: ffff802ade8f5728 x22: ffff802ade8f5708 [159785.933880] x21: ffff802adea2db40 x20: ffff802ade8f5400 [159785.939264] x19: ffff802adea2d800 x18: 0000000000000010 [159785.944649] x17: 00000000821bf734 x16: ffff00006714faa0 [159785.950033] x15: ffff0000e8ab4ecf x14: 7261702079646165 [159785.955417] x13: 726c612073277469 x12: ffff00006887b830 [159785.960802] x11: ffff00006773eaa0 x10: 7968702079687020 [159785.966186] x9 : 0000000000002453 x8 : 726f702072656874 [159785.971570] x7 : 6f6e6120666f2074 x6 : ffff802bcfb21290 [159785.976955] x5 : ffff802bcfb21290 x4 : 0000000000000000 [159785.982339] x3 : ffff802bcfb298c8 x2 : 337752b234c2ab00 [159785.987723] x1 : 337752b234c2ab00 x0 : 0000000000000000 [159785.993108] Process kworker/u96:2 (pid: 16993, stack limit = 0x0000000072dae094) [159786.000576] Call trace: [159786.003097] sas_port_add_phy+0x188/0x1b8 [159786.007179] sas_ex_get_linkrate.isra.5+0x134/0x140 [159786.012130] sas_ex_discover_expander+0x128/0x408 [159786.016906] sas_ex_discover_dev+0x218/0x4c8 [159786.021249] sas_ex_discover_devices+0x9c/0x1a8 [159786.025852] sas_discover_root_expander+0x134/0x160 [159786.030802] sas_discover_domain+0x1b8/0x1e8 [159786.035148] process_one_work+0x1b4/0x3f8 [159786.039230] worker_thread+0x54/0x470 [159786.042967] kthread+0x134/0x138 [159786.046269] ret_from_fork+0x10/0x18 [159786.049918] Code: 91322300 f0004402 91178042 97fe4c9b (d4210000) [159786.056083] Modules linked in: hns3_enet_ut(OE) hclge(OE) hnae3(OE) hisi_sas_test_hw(OE) hisi_sas_test_main(OE) serdes(OE) [159786.067202] ---[ end trace 03622b9e2d99e196 ]--- [159786.071893] Kernel panic - not syncing: Fatal exception [159786.077190] SMP: stopping secondary CPUs [159786.081192] Kernel Offset: disabled [159786.084753] CPU features: 0x2,a2a00a38 Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Reported-by: Jian Luo <luojian5@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-29scsi: libsas: only clear phy->in_shutdown after shutdown event doneJason Yan
When the event queue is full of phy up and down events and reached the threshold, we will queue a shutdown-event, and set phy->in_shutdown so that we will not queue a shutdown-event again. But before the shutdown-event can be executed, every phy-down event will clear phy->in_shutdown and a new shutdown-event will be queued. The queue will be full of these shutdown-events. Fix this by only clear phy->in_shutdown in sas_phye_shutdown(), that is after the first shutdown-event has been executed. Fixes: f12486e06ae8 ("scsi: libsas: shut down the PHY if events reached the threshold") Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> CC: Hannes Reinecke <hare@suse.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 59Thomas Gleixner
Based on 1 normalized pattern(s): this file is licensed under gplv2 this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 5 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.561902672@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21scsi: libsas: switch remaining files to SPDX tagsChristoph Hellwig
Use the the GPLv2 SPDX tag instead of verbose boilerplate text. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-21scsi: libsas: switch sas_ata.[ch] to SPDX tagsChristoph Hellwig
Use the the GPLv2+ SPDX tag instead of verbose boilerplate text. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-21scsi: libsas: add a SPDX tag to sas_task.cChristoph Hellwig
sas_task.c is the only libsas file missing licensing information. Add a GPLv2 tag for the default kernel license. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>