summaryrefslogtreecommitdiff
path: root/drivers/scsi/fcoe
AgeCommit message (Collapse)Author
2012-03-31Merge tag 'scsi-misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 Pull SCSI updates from James Bottomley: "This is primarily another round of driver updates (lpfc, bfa, fcoe, ipr) plus a new ufshcd driver. There shouldn't be anything controversial in here (The final deletion of scsi proc_ops which caused some build breakage has been held over until the next merge window to give us more time to stabilise it). I'm afraid, with me moving continents at exactly the wrong time, anything submitted after the merge window opened has been held over to the next merge window." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits) [SCSI] ipr: Driver version 2.5.3 [SCSI] ipr: Increase alignment boundary of command blocks [SCSI] ipr: Increase max concurrent oustanding commands [SCSI] ipr: Remove unnecessary memory barriers [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters [SCSI] ipr: Fix target id allocation re-use problem [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up [SCSI] bfa: Update the driver version to 3.0.23.0 [SCSI] bfa: BSG and User interface fixes. [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario. [SCSI] bfa: Move service parameter programming logic into firmware. [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation. [SCSI] bfa: Flash controller IOC pll init fixes. [SCSI] bfa: Serialize the IOC hw semaphore unlock logic. [SCSI] bfa: Modify ISR to process pending completions [SCSI] bfa: Add fc host issue lip support [SCSI] mpt2sas: remove extraneous sas_log_info messages [SCSI] libfc: fcoe_transport_create fails in single-CPU environment [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2] ...
2012-03-28[SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_upRobert Love
The rtnl_lock is primarily used to serialize networking driver changes as well as to ensure that a networking driver is not removed when making changes to it. fcoe also uses the rtnl_lock to protect the fcoe hostlist. fcoe_create holds the rtnl_lock over the entirity of the routine including a the call to fcoe_ctlr_link_up. This causes the below deadlock because fcoe_ctlr_link_up acquires the fcoe_ctlr ctlr_mutex and this deadlocks with a libfcoe thread that acquires the fcoe_ctlr ctlr_mutex and then the rtnl_lock (to update a MAC address). This patch drops the rtnl_lock before calling fcoe_ctlr_link_up and therefore the deadlock is prevented. https://bugzilla.kernel.org/show_bug.cgi?id=42918 the existing dependency chain (in reverse order) is: -> #1 (&fip->ctlr_mutex){+.+...}: [<c1091f70>] lock_acquire+0x80/0x1b0 [<c147655d>] mutex_lock_nested+0x6d/0x340 [<f8970c32>] fcoe_ctlr_link_up+0x22/0x180 [libfcoe] [<f894620e>] fcoe_create+0x47e/0x6e0 [fcoe] [<f8973dd3>] fcoe_transport_create+0x143/0x250 [libfcoe] [<c10527e0>] param_attr_store+0x30/0x60 [<c1052696>] module_attr_store+0x26/0x40 [<c11a201e>] sysfs_write_file+0xae/0x100 [<c11449df>] vfs_write+0x8f/0x160 [<c1144cbd>] sys_write+0x3d/0x70 [<c147a0c4>] syscall_call+0x7/0xb -> #0 (rtnl_mutex){+.+.+.}: [<c109164b>] __lock_acquire+0x140b/0x1720 [<c1091f70>] lock_acquire+0x80/0x1b0 [<c147655d>] mutex_lock_nested+0x6d/0x340 [<c13a10c4>] rtnl_lock+0x14/0x20 [<f89445ac>] fcoe_update_src_mac+0x2c/0xb0 [fcoe] [<f8971712>] fcoe_ctlr_timer_work+0x712/0xb60 [libfcoe] [<c104fb69>] process_one_work+0x179/0x5d0 [<c10502f1>] worker_thread+0x121/0x2d0 [<c10550ed>] kthread+0x7d/0x90 [<c1481a82>] kernel_thread_helper+0x6/0x10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fip->ctlr_mutex); lock(rtnl_mutex); lock(&fip->ctlr_mutex); lock(rtnl_mutex); *** DEADLOCK *** Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28[SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2]Neil Horman
There is potentially lots of contention for the rx_list_lock. On a cpu that is receiving lots of fcoe traffic, the softirq context has to add and release the lock for every frame it receives, as does the receiving per-cpu thread. We can reduce this contention somewhat by altering the per-cpu threads loop such that when traffic is detected on the fcoe_rx_list, we splice it to a temporary list. In this way, we can process multiple skbs while only having to acquire and release the fcoe_rx_list lock once. [ Braces around single statement while loop removed by Robert Love to satisfy checkpath.pl. ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28[SCSI] fcoe: remove frame dropping code from fcoe_percpu_cleanNeil Horman
commit e7a51997dad4e17395be1209970e18d2e9305b24 ([SCSI] fcoe: flush per-cpu thread work when destroying interface) added a skb flush to the fcoe_rx_list, which ensures that we push any pending frames on the list through the per-cpu receive thread. Because of this, its redundant to lock and scan the list first, dropping any arriving frames. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28[SCSI] foce: remove bh disable from fcoe sw transport rcv functionNeil Horman
The fcoe sw recive packet function (fcoe_rcv) only ever executes in softirq context. Given that, and the fact that no use of the fcoe_rx_list is made in irq context, its not necessecary to disable bottom halves while actually receiving the frame. Convert spin_*_bh calls in that function to their lock-only equivalents Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28[SCSI] libfcoe: Support extra MAC descriptor to be used as FCoE MACBhanu Prakash Gollapudi
Some switch implementations (eg., HP virtual connect FlexFabric) send two MAC descriptors in FIP FLOGI response, with first MAC descriptor (granted_mac) used as FPMA, and the second one (fcoe_mac) used as destination address for sending/receiving FCoE packets. fip_mac continues to be used for FIP traffic. This patch introduces fcoe_mac in fcoe_fcf structure. For regular switches, both fcoe_mac and fip_mac will be the same. For the switches that send additional MAC descriptor, fcoe_mac is updated. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28[SCSI] libfcoe: Do not sends FDISCs before FLOGI during CVLBhanu Prakash Gollapudi
When handling CVL with no Vx port descriptors, lports for NPIV ports are reset before issuing the ctlr_reset. This causes FDISCs to be issued before successful FLOGI. Fix it by resetting the controller before resetting the lports. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28[SCSI] fcoe: Ensure fcoe_recv_frame is always called in process contextNeil Horman
commit 859b7b649ab58ee5cbfb761491317d5b315c1b0f introduced the ability to call fcoe_recv_frame in softirq context. While this is beneficial to performance, its not safe to do, as it breaks the serialization of access to the lport structure (i.e. when an fcoe interface is being torn down, theres no way to serialize the teardown effort with the completion of receieve operations occuring in softirq context. As a result, lport (and other) data structures can be read and modified in parallel leading to corruption. Most notable is the vport list, which is protected by a mutex, that will cause a panic if a softirq receive while said mutex is locked. Additionaly, the ema_list, discussed here: http://lists.open-fcoe.org/pipermail/devel/2012-February/011947.html Can be corrupted if a list traversal occurs in softirq context at the same time as a list delete in process context. And generally the lport state variables will not be stable, and may lead to unpredictable results. The most direct fix is to remove the bits from the above commit that allowed fcoe_recv_frame to be called in softirq context. We just force all frames to be handled by the per-cpu rx threads. This will allow the fcoe_if_destroy's use of fcoe_percpu_clean to function properly, ensuring that no frames are being received while the lport is being torn down. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reviewed-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-22Merge tag 'scsi-misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 SCSI updates from James Bottomley: "The update includes the usual assortment of driver updates (lpfc, qla2xxx, qla4xxx, bfa, bnx2fc, bnx2i, isci, fcoe, hpsa) plus a huge amount of infrastructure work in the SAS library and transport class as well as an iSCSI update. There's also a new SCSI based virtio driver." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (177 commits) [SCSI] qla4xxx: Update driver version to 5.02.00-k15 [SCSI] qla4xxx: trivial cleanup [SCSI] qla4xxx: Fix sparse warning [SCSI] qla4xxx: Add support for multiple session per host. [SCSI] qla4xxx: Export CHAP index as sysfs attribute [SCSI] scsi_transport: Export CHAP index as sysfs attribute [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entry [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entry [SCSI] pm8001: fix endian issue with code optimization. [SCSI] pm8001: Fix possible racing condition. [SCSI] pm8001: Fix bogus interrupt state flag issue. [SCSI] ipr: update PCI ID definitions for new adapters [SCSI] qla2xxx: handle default case in qla2x00_request_firmware() [SCSI] isci: improvements in driver unloading routine [SCSI] isci: improve phy event warnings [SCSI] isci: debug, provide state-enum-to-string conversions [SCSI] scsi_transport_sas: 'enable' phys on reset [SCSI] libsas: don't recover end devices attached to disabled phys [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata [SCSI] libsas: set attached device type and target protocols for local phys ...
2012-03-21Merge branch 'kmap_atomic' of git://github.com/congwang/linuxLinus Torvalds
Pull kmap_atomic cleanup from Cong Wang. It's been in -next for a long time, and it gets rid of the (no longer used) second argument to k[un]map_atomic(). Fix up a few trivial conflicts in various drivers, and do an "evil merge" to catch some new uses that have come in since Cong's tree. * 'kmap_atomic' of git://github.com/congwang/linux: (59 commits) feature-removal-schedule.txt: schedule the deprecated form of kmap_atomic() for removal highmem: kill all __kmap_atomic() [swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename] drbd: remove the second argument of k[un]map_atomic() zcache: remove the second argument of k[un]map_atomic() gma500: remove the second argument of k[un]map_atomic() dm: remove the second argument of k[un]map_atomic() tomoyo: remove the second argument of k[un]map_atomic() sunrpc: remove the second argument of k[un]map_atomic() rds: remove the second argument of k[un]map_atomic() net: remove the second argument of k[un]map_atomic() mm: remove the second argument of k[un]map_atomic() lib: remove the second argument of k[un]map_atomic() power: remove the second argument of k[un]map_atomic() kdb: remove the second argument of k[un]map_atomic() udf: remove the second argument of k[un]map_atomic() ubifs: remove the second argument of k[un]map_atomic() squashfs: remove the second argument of k[un]map_atomic() reiserfs: remove the second argument of k[un]map_atomic() ocfs2: remove the second argument of k[un]map_atomic() ntfs: remove the second argument of k[un]map_atomic() ...
2012-03-20scsi: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-19fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on txYi Zou
Fix a bug when using 'ethtool -K ethx tx off' to turn off tx ip checksum, FCoE CRC offload should not be impacte. The skb_checksum_help() is needed only if it's not FCoE traffic for ip checksum, regardless of ethtool toggling the tx ip checksum on or off. Instead of using CHECKSUM_PARTIAL, we will use CHECKSUM_UNNECESSARY as a proper indication to avoid sw ip checksum on FCoE frames. Ref. to original discussion thread: http://patchwork.ozlabs.org/patch/146567/ CC: "James E.J. Bottomley" <JBottomley@parallels.com> CC: Robert Love <robert.w.love@intel.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-19[SCSI] fcoe: Remove reference counting on 'stuct fcoe_interface'Robert Love
The reference counting was necessary on these instances because it was possible for NPIV ports to be destroyed after the N_Port. A previous patch ensures that all NPIV ports are destroyed before the N_Port making the need to track references on the interface unnecessary. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] fcoe: Do not switch context in vport_delete callbackRobert Love
Currently all port deletion is routed though the FCoE workqueue (fcoe_wq). When fc_remove_host is called on an N_Port (for example, from fcoe_destroy) the vports are queued into a FC Transport workqueue. fc_remove_host flushes that queue and each vport is passed to fcoe's fcoe_vport_destroy, which simply queues the associated fcoe_ports for later deletion. This queue cannot be flushed within the N_Ports destroy path because of circular locking issues. The result is that the NPIV ports are destroyed after the N_Port, which is reverse of how they are created. This quirk causes fcoe to keep references on the fcoe_interface shared by each of these ports (N_Port and NPIV). Changing the ordering such that NPIV ports are destroyed before the N_Port will allow us to remove reference counting on the fcoe_interface instances. This patch simply allows fcoe_vport_destory to destroy NPIV ports without deferring them to a workqueue context. This ensures that when fc_remove_host is called the NPIV ports will be destroyed first before the N_Port and allows reference counting on the fcoe's fcoe_interface to be remove in a later patch. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] fcoe: Rename out_nomod label to out_putmodRobert Love
The label implies that it should be called when there is 'nomod.' I read that to mean that the module reference 'get' failed. However, it's only called when the module reference 'get' succeeded. I think it makes more sense to name the label, 'out_putmod' since it should be called when we need to 'put' the module reference taken in the routine before returning. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] fcoe: Allow exposing FDMI attributes via sysfsNeerav Parikh
Allow FDMI attributes to be exposed via the fc_host class object for the fcoe driver. Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] libfcoe: Don't KERN_ERR on netdev notificationRobert Love
This is more of a debug statement. As a KERN_ERR we generate log entries anytime any netdev goes up or down, so when booting there are notification log entries for all system interfaces including 'lo'. This is too much. Let's just log when necessary. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] fcoe: Allow exposing FDMI attributes via sysfsNeerav Parikh
Allow FDMI attributes to be exposed via the fc_host class object for the fcoe driver. Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] fcoe: Add support for FDMI in fcoeNeerav Parikh
This adds support for updating the FC-GS FDMI attributes in the fcoe driver. Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] fcoe: Move fcoe_debug_logging from fcoe.h to fcoe.cBart Van Assche
Move the definition of the global variable fcoe_debug_logging from fcoe.h to fcoe.c. Avoid that sparse complains about missing declarations for local functions or variables by declaring these static. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] fcoe: fix regression on offload em matching function for initiator/targetYi Zou
This is a regression introduced by commit 1ff9918b625457ce20d450d00f9ed0a12ba191b7 The else statement here is breaking the initiator logic of allocating xid from the offloaded em xid pool for READ I/O only to use DDP, as shown by the snippet of trace below, where the WRITE is using xid 0x5 from the offloaded em xid pool: Protocol VID Len S_ID D_ID OX_ID RX_ID Summary .. *FCP 228 96 0b.08.01 -> 01.0f.00 0x0005 0xffff SCSI: Write(10) LUN: 0x00 FCP 228 76 01.0f.00 -> 0b.08.01 0x0005 0x828d XFER_RDY ... The bug is in the else statement, for both initiator and target, the new command will have FC frame header bit 23 (FC_FC_EX_CTX) cleared as it was originated from the initiator. Also, this is assuming the frame header is already filled up, which is only true for target since for initiator, this is a new frame and oem_match gets called when em tries get xid for this i/o before it is filled up and sent out. The fix is to check if there is a fc_fcp_pkt associated w/ this frame from fr_fsp(fp), since fr_fsp(fp) is NULL for tcm_fc target and non-I/O frame in initiator. This should also return true for target only if it is an FC_RCTL_DD_UNSOL_CMD and rx_id is not allocated. Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-10[SCSI] fcoe: remove double check if skb is nonlinearRobert Love
skb_linearize already has a check for skb_is_nonlinear, there is no need to duplicate the check in fcoe.c. This patch simply removes the unnecessary check and calls skb_linearize unconditionally. Reported-by: patrick kelle <patrick.kelle81@gmail.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: patrick kelle <patrick.kelle81@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] fcoe: fix fcoe in a DCB environment by adding DCB notifiers to set ↵john fastabend
skb priority Use DCB notifiers to set the skb priority to allow packets to be steered and tagged correctly over DCB enabled drivers that setup traffic classes. This allows queue_mapping() routines to be removed in these drivers that were previously inspecting the ethertype of every skb to mark FCoE/FIP frames. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-14[SCSI] fcoe: Fix preempt count leak in fcoe_filter_frames()Thomas Gleixner
The error exit path leaks preempt count. Add the missing put_cpu(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Yi Zou <yi.zou@intel.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-31[SCSI] libfc: improve flogi retries to avoid lport stuckVasu Dev
Adds more cases to do flogi retry, now also retry on getting bad response due to either no ELS response or flogi response payload length not large enough. In those cases flogi was not retried and that was leaving lport offline. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits) [SCSI] qla4xxx: export address/port of connection (fix udev disk names) [SCSI] ipr: Fix BUG on adapter dump timeout [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer [SCSI] hpsa: change confusing message to be more clear [SCSI] iscsi class: fix vlan configuration [SCSI] qla4xxx: fix data alignment and use nl helpers [SCSI] iscsi class: fix link local mispelling [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA [SCSI] aacraid: use lower snprintf() limit [SCSI] lpfc 8.3.27: Change driver version to 8.3.27 [SCSI] lpfc 8.3.27: T10 additions for SLI4 [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes [SCSI] megaraid_sas: Changelog and version update [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts ...
2011-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits) dp83640: free packet queues on remove dp83640: use proper function to free transmit time stamping packets ipv6: Do not use routes from locally generated RAs |PATCH net-next] tg3: add tx_dropped counter be2net: don't create multiple RX/TX rings in multi channel mode be2net: don't create multiple TXQs in BE2 be2net: refactor VF setup/teardown code into be_vf_setup/clear() be2net: add vlan/rx-mode/flow-control config to be_setup() net_sched: cls_flow: use skb_header_pointer() ipv4: avoid useless call of the function check_peer_pmtu TCP: remove TCP_DEBUG net: Fix driver name for mdio-gpio.c ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces ipv4: fix ipsec forward performance regression jme: fix irq storm after suspend/resume route: fix ICMP redirect validation net: hold sock reference while processing tx timestamps tcp: md5: add more const attributes Add ethtool -g support to virtio_net ... Fix up conflicts in: - drivers/net/Kconfig: The split-up generated a trivial conflict with removal of a stale reference to Documentation/networking/net-modules.txt. Remove it from the new location instead. - fs/sysfs/dir.c: Fairly nasty conflicts with the sysfs rb-tree usage, conflicting with Eric Biederman's changes for tagged directories.
2011-10-19net: add skb frag size accessorsEric Dumazet
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-16[SCSI] fcoe,libfcoe: Move common code for fcoe_get_lesb to fcoe_transportBhanu Prakash Gollapudi
Except for obtaining the netdev from lport, fcoe_get_lesb is the common code for the LLDs. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Acked-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02[SCSI] fcoe: setup default initial value for DDP thresholdVasu Dev
Currently fcoe_ddp_min doesn't have default value so by default not used, so setting up default value as 4k as this works better by avoiding overhead of programing DDP for small IOs. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02[SCSI] fcoe: use real dev in case of HW vlan accelerationVasu Dev
Use real dev in case it has HW vlan acceleration support since in this case the real dev would do needed vlan processing, this way unnecessary vlan layer processing avoided and it gives slightly better IOPS with 512B size IOs. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02[SCSI] fcoe: use kthread_create_on_nodeEric Dumazet
Since fcoe_percpu_thread_create() creates percpu kthread, it makes sense to use kthread_create_on_node() to get proper NUMA affinity for kthread stack. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-09-22Merge branch 'master' of github.com:davem330/netDavid S. Miller
Conflicts: MAINTAINERS drivers/net/Kconfig drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c drivers/net/ethernet/broadcom/tg3.c drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
2011-09-15net: consolidate and fix ethtool_ops->get_settings callingJiri Pirko
This patch does several things: - introduces __ethtool_get_settings which is called from ethtool code and from drivers as well. Put ASSERT_RTNL there. - dev_ethtool_get_settings() is replaced by __ethtool_get_settings() - changes calling in drivers so rtnl locking is respected. In iboe_get_rate was previously ->get_settings() called unlocked. This fixes it. Also prb_calc_retire_blk_tmo() in af_packet.c had the same problem. Also fixed by calling __dev_get_by_index() instead of dev_get_by_index() and holding rtnl_lock for both calls. - introduces rtnl_lock in bnx2fc_vport_create() and fcoe_vport_create() so bnx2fc_if_create() and fcoe_if_create() are called locked as they are from other places. - use __ethtool_get_settings() in bonding code Signed-off-by: Jiri Pirko <jpirko@redhat.com> v2->v3: -removed dev_ethtool_get_settings() -added ASSERT_RTNL into __ethtool_get_settings() -prb_calc_retire_blk_tmo - use __dev_get_by_index() and lock around it and __ethtool_get_settings() call v1->v2: add missing export_symbol Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> [except FCoE bits] Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15Merge branch 'master' into for-nextJiri Kosina
Fast-forward merge with Linus to be able to merge patches based on more recent version of the tree.
2011-09-15Remove unneeded version.h includes from drivers/scsi/Jesper Juhl
It was pointed out by 'make versioncheck' that some includes of linux/version.h are not needed in drivers/scsi/. This patch removes them. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-28[SCSI] fcoe: Fix deadlock between fip's recv_work and rtnlRobert Love
The rtnl cannot be held durrng the fcoe_interface_put. If it is the last reference on the fcoe_interface the fcoe_ctlr_destroy will be called as a part of the cleanup, ultimately calling cancel_work_sync(&fip->recv_work); If we are processing a flogi response we will be in the recv_work context and we will lock the rtnl to add a new unicast MAC address. This is how the deadlock can occur. The fix is simply to move the rtnl_lock/unlock into fcoe_interface_cleanup so that it can be unlocked before fcoe_interface_put is called. Here is the lockdep report: Jul 21 11:26:35 bubba [ 223.870702] ul 21 11:26:35 bubba [ 223.870704] ======================================================= Jul 21 11:26:35 bubba [ 223.871255] [ INFO: possible circular locking dependency detected ] Jul 21 11:26:35 bubba [ 223.871530] 3.0.0-rc7+ #1 Jul 21 11:26:35 bubba [ 223.871797] ------------------------------------------------------- Jul 21 11:26:35 bubba [ 223.872072] lockdeptest.sh/3464 is trying to acquire lock: Jul 21 11:26:35 bubba [ 223.872345] ((&fip->recv_work) Jul 21 11:26:35 bubba ){+.+.+.} Jul 21 11:26:35 bubba , at: Jul 21 11:26:35 bubba [<ffffffff810531f1>] wait_on_work+0x0/0xbd Jul 21 11:26:35 bubba [ 223.873022] Jul 21 11:26:35 bubba [ 223.873023] but task is already holding lock: Jul 21 11:26:35 bubba [ 223.873555] (rtnl_mutex Jul 21 11:26:35 bubba ){+.+.+.} Jul 21 11:26:35 bubba , at: Jul 21 11:26:35 bubba [<ffffffff813e8233>] rtnl_lock+0x12/0x14 Jul 21 11:26:35 bubba [ 223.874229] Jul 21 11:26:35 bubba [ 223.874230] which lock already depends on the new lock. Jul 21 11:26:35 bubba [ 223.874231] Jul 21 11:26:35 bubba [ 223.875032] Jul 21 11:26:35 bubba [ 223.875033] the existing dependency chain (in reverse order) is: Jul 21 11:26:35 bubba [ 223.875573] Jul 21 11:26:35 bubba [ 223.875573] -> #1 Jul 21 11:26:35 bubba (rtnl_mutex Jul 21 11:26:35 bubba ){+.+.+.} Jul 21 11:26:35 bubba : Jul 21 11:26:35 bubba [ 223.876301] Jul 21 11:26:35 bubba [<ffffffff8106c14a>] lock_acquire+0xd2/0xf7 Jul 21 11:26:35 bubba [ 223.876645] Jul 21 11:26:35 bubba [<ffffffff8151d975>] __mutex_lock_common+0x47/0x30d Jul 21 11:26:35 bubba [ 223.876991] Jul 21 11:26:35 bubba [<ffffffff8151dd36>] mutex_lock_nested+0x3b/0x40 Jul 21 11:26:35 bubba [ 223.877334] Jul 21 11:26:35 bubba [<ffffffff813e8233>] rtnl_lock+0x12/0x14 Jul 21 11:26:35 bubba [ 223.877675] Jul 21 11:26:35 bubba [<ffffffffa003d5a0>] fcoe_update_src_mac+0x2b/0x80 [fcoe] Jul 21 11:26:35 bubba [ 223.878022] Jul 21 11:26:35 bubba [<ffffffffa003d698>] fcoe_flogi_resp+0x5e/0x79 [fcoe] Jul 21 11:26:35 bubba [ 223.878366] Jul 21 11:26:35 bubba [<ffffffffa001566f>] fc_exch_recv+0x7f5/0x9da [libfc] Jul 21 11:26:35 bubba [ 223.878713] Jul 21 11:26:35 bubba [<ffffffffa00327d8>] fcoe_ctlr_recv_work+0x71f/0x10dc [libfcoe] Jul 21 11:26:35 bubba [ 223.879258] Jul 21 11:26:35 bubba [<ffffffff81053761>] process_one_work+0x1d7/0x347 Jul 21 11:26:35 bubba [ 223.879601] Jul 21 11:26:35 bubba [<ffffffff81054ade>] worker_thread+0xf8/0x17c Jul 21 11:26:35 bubba [ 223.879944] Jul 21 11:26:35 bubba [<ffffffff81058184>] kthread+0x7d/0x85 Jul 21 11:26:35 bubba [ 223.880287] Jul 21 11:26:35 bubba [<ffffffff81526414>] kernel_thread_helper+0x4/0x10 Jul 21 11:26:35 bubba [ 223.880634] Jul 21 11:26:35 bubba [ 223.880635] -> #0 Jul 21 11:26:35 bubba ((&fip->recv_work) Jul 21 11:26:35 bubba ){+.+.+.} Jul 21 11:26:35 bubba : Jul 21 11:26:35 bubba [ 223.881357] Jul 21 11:26:35 bubba [<ffffffff8106b93e>] __lock_acquire+0xb1d/0xe2c Jul 21 11:26:35 bubba [ 223.881695] Jul 21 11:26:35 bubba [<ffffffff8106c14a>] lock_acquire+0xd2/0xf7 Jul 21 11:26:35 bubba [ 223.882033] Jul 21 11:26:35 bubba [<ffffffff81053241>] wait_on_work+0x50/0xbd Jul 21 11:26:35 bubba [ 223.882378] Jul 21 11:26:35 bubba [<ffffffff81053b32>] __cancel_work_timer+0xb6/0xf4 Jul 21 11:26:35 bubba [ 223.882718] Jul 21 11:26:35 bubba [<ffffffff81053b8a>] cancel_work_sync+0xb/0xd Jul 21 11:26:35 bubba [ 223.883057] Jul 21 11:26:35 bubba [<ffffffffa00317e6>] fcoe_ctlr_destroy+0x1d/0x67 [libfcoe] Jul 21 11:26:35 bubba [ 223.883399] Jul 21 11:26:35 bubba [<ffffffffa003e51e>] fcoe_interface_release+0x21/0x45 [fcoe] Jul 21 11:26:35 bubba [ 223.883940] Jul 21 11:26:35 bubba [<ffffffff811fbbe6>] kref_put+0x43/0x4d Jul 21 11:26:35 bubba [ 223.884280] Jul 21 11:26:35 bubba [<ffffffffa003ebba>] fcoe_interface_put+0x17/0x19 [fcoe] Jul 21 11:26:35 bubba [ 223.884624] Jul 21 11:26:35 bubba [<ffffffffa003f2a6>] fcoe_interface_cleanup+0x188/0x193 [fcoe] Jul 21 11:26:35 bubba [ 223.885163] Jul 21 11:26:35 bubba [<ffffffffa003f303>] fcoe_destroy+0x52/0x72 [fcoe] Jul 21 11:26:35 bubba [ 223.885502] Jul 21 11:26:35 bubba [<ffffffffa00340a4>] fcoe_transport_destroy+0xab/0x110 [libfcoe] Jul 21 11:26:35 bubba [ 223.886045] Jul 21 11:26:35 bubba [<ffffffff81056153>] param_attr_store+0x43/0x62 Jul 21 11:26:35 bubba [ 223.886385] Jul 21 11:26:35 bubba [<ffffffff8105602d>] module_attr_store+0x21/0x25 Jul 21 11:26:35 bubba [ 223.886728] Jul 21 11:26:35 bubba [<ffffffff8114c23d>] sysfs_write_file+0x103/0x13f Jul 21 11:26:35 bubba [ 223.887068] Jul 21 11:26:35 bubba [<ffffffff810f3e7b>] vfs_write+0xa7/0xfa Jul 21 11:26:35 bubba [ 223.887406] Jul 21 11:26:35 bubba [<ffffffff810f4073>] sys_write+0x45/0x69 Jul 21 11:26:35 bubba [ 223.887742] Jul 21 11:26:35 bubba [<ffffffff815252bb>] system_call_fastpath+0x16/0x1b Jul 21 11:26:35 bubba [ 223.888083] Jul 21 11:26:35 bubba [ 223.888084] other info that might help us debug this: Jul 21 11:26:35 bubba [ 223.888085] Jul 21 11:26:35 bubba [ 223.888879] Possible unsafe locking scenario: Jul 21 11:26:35 bubba [ 223.888881] Jul 21 11:26:35 bubba [ 223.889411] CPU0 CPU1 Jul 21 11:26:35 bubba [ 223.889683] ---- ---- Jul 21 11:26:35 bubba [ 223.889955] lock( Jul 21 11:26:35 bubba rtnl_mutex Jul 21 11:26:35 bubba ); Jul 21 11:26:35 bubba [ 223.890349] lock( Jul 21 11:26:35 bubba (&fip->recv_work) Jul 21 11:26:35 bubba ); Jul 21 11:26:35 bubba [ 223.890751] lock( Jul 21 11:26:35 bubba rtnl_mutex Jul 21 11:26:35 bubba ); Jul 21 11:26:35 bubba [ 223.891154] lock( Jul 21 11:26:35 bubba (&fip->recv_work) Jul 21 11:26:35 bubba ); Jul 21 11:26:35 bubba [ 223.891549] Jul 21 11:26:35 bubba [ 223.891550] *** DEADLOCK *** Jul 21 11:26:35 bubba [ 223.891551] Jul 21 11:26:35 bubba [ 223.892347] 6 locks held by lockdeptest.sh/3464: Jul 21 11:26:35 bubba [ 223.892621] #0: Jul 21 11:26:35 bubba (&buffer->mutex Jul 21 11:26:35 bubba ){+.+.+.} Jul 21 11:26:35 bubba , at: Jul 21 11:26:35 bubba [<ffffffff8114c171>] sysfs_write_file+0x37/0x13f Jul 21 11:26:35 bubba [ 223.893359] #1: Jul 21 11:26:35 bubba (s_active Jul 21 11:26:35 bubba ){++++.+} Jul 21 11:26:35 bubba , at: Jul 21 11:26:35 bubba [<ffffffff8114c21c>] sysfs_write_file+0xe2/0x13f Jul 21 11:26:35 bubba [ 223.894094] #2: Jul 21 11:26:35 bubba (param_lock Jul 21 11:26:35 bubba ){+.+.+.} Jul 21 11:26:35 bubba , at: Jul 21 11:26:35 bubba [<ffffffff81056146>] param_attr_store+0x36/0x62 Jul 21 11:26:35 bubba [ 223.894835] #3: Jul 21 11:26:35 bubba (ft_mutex Jul 21 11:26:35 bubba ){+.+.+.} Jul 21 11:26:35 bubba , at: Jul 21 11:26:35 bubba [<ffffffffa0034017>] fcoe_transport_destroy+0x1e/0x110 [libfcoe] Jul 21 11:26:35 bubba [ 223.895574] #4: Jul 21 11:26:35 bubba (fcoe_config_mutex Jul 21 11:26:35 bubba ){+.+.+.} Jul 21 11:26:35 bubba , at: Jul 21 11:26:35 bubba [<ffffffffa003f2c9>] fcoe_destroy+0x18/0x72 [fcoe] Jul 21 11:26:35 bubba [ 223.896314] #5: Jul 21 11:26:35 bubba (rtnl_mutex Jul 21 11:26:35 bubba ){+.+.+.} Jul 21 11:26:35 bubba , at: Jul 21 11:26:35 bubba [<ffffffff813e8233>] rtnl_lock+0x12/0x14 Jul 21 11:26:35 bubba [ 223.897047] Jul 21 11:26:35 bubba [ 223.897048] stack backtrace: Jul 21 11:26:35 bubba [ 223.897578] Pid: 3464, comm: lockdeptest.sh Not tainted 3.0.0-rc7+ #1 Jul 21 11:26:35 bubba [ 223.897853] Call Trace: Jul 21 11:26:35 bubba [ 223.898128] [<ffffffff81068e16>] print_circular_bug+0x1f8/0x209 Jul 21 11:26:35 bubba [ 223.898416] [<ffffffff8106b93e>] __lock_acquire+0xb1d/0xe2c Jul 21 11:26:35 bubba [ 223.898699] [<ffffffff810531f1>] ? wait_on_cpu_work+0xe6/0xe6 Jul 21 11:26:35 bubba [ 223.898982] [<ffffffff8106c14a>] lock_acquire+0xd2/0xf7 Jul 21 11:26:35 bubba [ 223.899263] [<ffffffff810531f1>] ? wait_on_cpu_work+0xe6/0xe6 Jul 21 11:26:35 bubba [ 223.899547] [<ffffffff8104a097>] ? mod_timer+0x8f/0x98 Jul 21 11:26:35 bubba [ 223.899827] [<ffffffff81053241>] wait_on_work+0x50/0xbd Jul 21 11:26:35 bubba [ 223.900108] [<ffffffff810531f1>] ? wait_on_cpu_work+0xe6/0xe6 Jul 21 11:26:35 bubba [ 223.900390] [<ffffffff81053b32>] __cancel_work_timer+0xb6/0xf4 Jul 21 11:26:35 bubba [ 223.900671] [<ffffffff81053b8a>] cancel_work_sync+0xb/0xd Jul 21 11:26:35 bubba [ 223.900953] [<ffffffffa00317e6>] fcoe_ctlr_destroy+0x1d/0x67 [libfcoe] Jul 21 11:26:35 bubba [ 223.901237] [<ffffffffa003e51e>] fcoe_interface_release+0x21/0x45 [fcoe] Jul 21 11:26:35 bubba [ 223.901522] [<ffffffffa003e4fd>] ? fcoe_enable+0x6b/0x6b [fcoe] Jul 21 11:26:35 bubba [ 223.901803] [<ffffffff811fbbe6>] kref_put+0x43/0x4d Jul 21 11:26:35 bubba [ 223.902083] [<ffffffffa003ebba>] fcoe_interface_put+0x17/0x19 [fcoe] Jul 21 11:26:35 bubba [ 223.902367] [<ffffffffa003f2a6>] fcoe_interface_cleanup+0x188/0x193 [fcoe] Jul 21 11:26:35 bubba [ 223.902653] [<ffffffff8151dd36>] ? mutex_lock_nested+0x3b/0x40 Jul 21 11:26:35 bubba [ 223.902939] [<ffffffffa003f303>] fcoe_destroy+0x52/0x72 [fcoe] Jul 21 11:26:35 bubba [ 223.903223] [<ffffffffa00340a4>] fcoe_transport_destroy+0xab/0x110 [libfcoe] Jul 21 11:26:35 bubba [ 223.903508] [<ffffffff81056153>] param_attr_store+0x43/0x62 Jul 21 11:26:35 bubba [ 223.903792] [<ffffffff8105602d>] module_attr_store+0x21/0x25 Jul 21 11:26:35 bubba [ 223.904075] [<ffffffff8114c23d>] sysfs_write_file+0x103/0x13f Jul 21 11:26:35 bubba [ 223.904357] [<ffffffff810f3e7b>] vfs_write+0xa7/0xfa Jul 21 11:26:35 bubba [ 223.904642] [<ffffffff810f51d6>] ? fget_light+0x35/0x96 Jul 21 11:26:35 bubba [ 223.904923] [<ffffffff810f4073>] sys_write+0x45/0x69 Jul 21 11:26:35 bubba [ 223.905204] [<ffffffff815252bb>] system_call_fastpath+0x16/0x1b Jul 21 11:26:36 bubba [ 223.964438] ixgbe 0000:05:00.0: eth3: detected SFP+: 5 Jul 21 11:26:37 bubba [ 225.196702] ixgbe 0000:05:00.0: eth3: NIC Link is Up 10 Gbps, Flow Control: None Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Reviewed-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] fcoe: Move common functions to fcoe_transport libraryBhanu Prakash Gollapudi
Export fcoe_get_wwn, fcoe_validate_vport_create and fcoe_wwn_to_str so that all LLDs can use these common function. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-26fcoe: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Robert Love <robert.w.love@intel.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: devel@open-fcoe.org Cc: linux-scsi@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-28[SCSI] fcoe: cleanup cpu selection for incoming requestsVasu Dev
Cleanup to: - have selection for all types of frames, not just FCP. - remove redundant cpu_online check once fcoe_select_cpu called as this is not required since later code flow check for offlined cpu. - Simplify fcoe_select_cpu() by removing unnecessary checks to skip curr_cpu, this also fixes possibly infinite loop in case of curr_cpu is the only cpu while iterating in the loop. This cleanup mainly applies to target as incoming request are mostly for target, therefore Kiran has verified the patch with target also. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-28[SCSI] fcoe: add fip retry to avoid missing critical keep aliveVasu Dev
Use pending queue to retry FIP frame in case its tx fails and use common pending queue for both fcoe and fip frames using fcoe_port_send. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-28[SCSI] libfc, fcoe: ignore rx frame with wrong xid infoVasu Dev
Drop the rx frame having xid with wrong cpu info or received with xid not matching to our xid. Not dropping such frame is causing panic as that causes accessing data struct beyond their bounds. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-28[SCSI] fcoe: remove unused ptype field in fcoe_rcv_infoYi Zou
There is no need to cache the ptype in fcoe_rcv_info struct as it is never used anywhere. Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] fcoe: Rearrange fcoe port and NPIV port cleanupNeerav Parikh
When NPIV port destroy handler is called it does not do all the cleanup required for the given NPIV port. This was happening as some of the lport cleanup moved to fcoe_interface_cleanup() routine, which is not called as part of the vport delete process. This patch rearranges the sequence in which the fcoe_if_destory() and fcoe_interface_cleanup() functions are being called from various places in the code. It now matches the sequence they are constructed during the create process for both N_Port as well as NPIV port. Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] fcoe: Amends previous patch, Round-robin based selection of CPU for ↵Kiran Patil
post processing of incoming request for FCoE target Problem: Selection of RX queue on target is based on RX-ID. FCoE used 8 Net Rx queues. HW post the packets based on rx_id % num_rx_queue. Due to this has based filtering, only one CPU is busy servicing incoming request including post-processing of incoming request. This is gating factor because 1. Only one CPU is utilized 100% while others CPUs are not used at all. 2. CPU which received request assign "sequence' by selecting exchange from per CPU pool (num_ddp_context / num_online_cpus, approxi.). Due to which if if rate of incoming request is higher than rate of servicing request, existing code path end of sending "BUSY" response (SAM_STAT_BUSY because unable to allocate exchange). Fix: Fan-out incoming request to all other CPUs excluding the CPU which is receiving all incoiming request. This path also addresses, selecting same CPU based on rx_id from received frame for completion of the request such as "releasing exchange to the per CPU Pool". This fix is applicable for FCoE target since initiator code path already takes care of selecting CPU to complete post-processing of request once OX_ID is assigned. Notes: N/A Dependencines: N/A Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] fcoe: Round-robin based selection of CPU for post-processing of ↵Kiran Patil
incoming commands Problem: Earlier mechanism of selection of CPU was, to select the same CPU which has received incoming request. Hence in case of rx_id = 0xFFFF, request was always posted to same NetRx queue, hence only 1 CPU is utilized for handling the command. It was also causing problem of "running out of exchanges from per CPU pool of exchanges (in case of DDP offload) Fix: Implemented new algo. to select CPU for post-processing of incoming commands when rx_id is unknown. This is simple Round robin algo. for CPU selection. Notes/Dependencies: N/A Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] fcoe: Unable to select the exchangeID from offload pool for storage ↵Kiran Patil
targets Problem: When initiator sends write command to target, target tries to assign new sequence. It allocates new exchangeID (RX_ID) always from non-offloaded pool (Non-offload EMA) Fix: Enhanced fcoe_oem_match routine to look at F_CTL flags and if it is exchange responder and command type is WRITEDATA, then function returns TRUE instead of FALSE. This function is used to determine which pool to use (offload pool of exchange is used only if this function returns TRUE). Technical Notes: N/A Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] fcoe: support ndo_fcoe_ddp_target() for DDP in FCoE targeYi Zou
Add ddp_target() support to the Open-FCoE sw fcoe hba driver (fcoe.ko). Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-05-24[SCSI] libfcoe: Remove unnecessary module state checksRobert Love
libfcoe's interface consists of create, destroy, enable, disable and create_vn2vn. These are currently module paramaters added durring the module initialization. A concern arose that the module parameters were being added with write permissions before the module had completed initialization. The following code was added to each sysfs store file. * Make sure the module has been initialized, and is not about to be * removed. Module parameter sysfs files are writable before the * module_init function is called and after module_exit. */ if (THIS_MODULE->state != MODULE_STATE_LIVE) goto out_nodev; This check was called out as unhelpful as the module can go dead at any time and therefore its state isn't a reliable thing to look at as a sign of stability and initialization completion. Also, that functional interfaces like these should be added after module initialization. This patch removes the unnecessary checks and hopes to disprove the concern about initialization ordering. Recent fcoe transport rework changes now require fcoe transports to register with libfcoe before any operation can take place. libfcoe may access some static variables but nothing that could cause a problem. Once a fcoe transport is registered, libfcoe is usable and any interface calls will be functional. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24[SCSI] fcoe: Prevent creation of an NPIV port with duplicate WWPNNeerav Parikh
This patch adds a validation step before allowing creation of a new NPIV port. It checks whether the WWPN passed for the new NPIV port to be created is unique for the given physical port. Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>