| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"Almost all SoC code changes this time are for the TI OMAP platform,
which continues its decade-long quest to move from describing a
complex SoC in code to device tree.
Aside from this, the Uniphier platform has a new maintainer and some
platforms have minor bugfixes and cleanups that were not urgent enough
for v5.12"
* tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
MAINTAINERS: Update ARM/UniPhier SoCs maintainers and status
mailmap: Update email address for Nicolas Saenz
MAINTAINERS: Update BCM2711/BCM2335 maintainer's mail
ARM: exynos: correct kernel doc in platsmp
ARM: hisi: use the correct HiSilicon copyright
ARM: ux500: make ux500_cpu_die static
ARM: s3c: Use pwm_get() in favour of pwm_request() in RX1950
ARM: OMAP1: fix incorrect kernel-doc comment syntax in file
ARM: OMAP2+: fix incorrect kernel-doc comment syntax in file
ARM: OMAP2+: Use DEFINE_SPINLOCK() for spinlock
ARM: at91: pm: Move prototypes to mutually included header
ARM: OMAP2+: use true and false for bool variable
ARM: OMAP2+: add missing call to of_node_put()
ARM: OMAP2+: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
ARM: imx: Kconfig: Fix typo in help
ARM: mach-imx: Fix a spelling in the file pm-imx5.c
bus: ti-sysc: Warn about old dtb for dra7 and omap4/5
ARM: OMAP2+: Stop building legacy code for dra7 and omap4/5
ARM: OMAP2+: Drop legacy platform data for omap5 hwmod
ARM: OMAP2+: Drop legacy platform data for omap5 l3
...
|
|
The commit f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file")
enabled GPIO pin number and label in debugfs for pin controller. However,
it limited that feature to the chips where base is positive number. This,
in particular, excluded chips where base is 0 for the historical or backward
compatibility reasons. Refactor the code to include the latter as well.
Fixes: f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file")
Cc: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Drew Fustini <drew@beagleboard.org>
Reviewed-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210415130356.15885-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v5.12-4
* Fix pin numbering per community in Intel Lewisburg driver
The following is an automated git shortlog grouped by driver:
lewisburg:
- Update number of pins in community
|
|
When updating pin names for Intel Lewisburg, the numbers of pins were
left behind. Update them accordingly.
Fixes: e66ff71fd0db ("pinctrl: lewisburg: Update pin list according to v1.1v6")
Signed-off-by: Yuanyuan Zhong <yzhong@purestorage.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add check against LPC device v2 compatible string to
ensure that the fixed device tree layout is adopted.
The LPC register offsets are also fixed accordingly.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210319062752.145730-4-andrew@aj.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v5.12-3
* Check if device is present, which is not the case in Xen
The following is an automated git shortlog grouped by driver:
intel:
- check REVID register value for device presence
|
|
Both the caller and the supplier's source file should have access to
the include file containing the prototypes.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-at91.c:1637:6: warning: no previous prototype for ‘at91_pinctrl_gpio_suspend’ [-Wmissing-prototypes]
1637 | void at91_pinctrl_gpio_suspend(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-at91.c:1661:6: warning: no previous prototype for ‘at91_pinctrl_gpio_resume’ [-Wmissing-prototypes]
1661 | void at91_pinctrl_gpio_resume(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Cc: Russell King <linux@armlinux.org.uk>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210303124149.3149511-1-lee.jones@linaro.org
|
|
Use the value read from the REVID register in order to check for the
presence of the device. A read of all ones is treated as if the device
is not present, and hence probing is ended.
This fixes an issue when running as a Xen PVH dom0, where the ACPI
DSDT table is provided unmodified to dom0 and hence contains the
pinctrl devices, but the MMIO region(s) containing the device
registers might not be mapped in the guest physical memory map if such
region(s) are not exposed on a PCI device BAR or marked as reserved in
the host memory map.
Fixes: 91d898e51e60 ("pinctrl: intel: Convert capability list to features")
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
clang is clearly correct to point out a typo in a silly
array of strings:
drivers/pinctrl/qcom/pinctrl-sdx55.c:426:61: error: suspicious concatenation of string literals in an array initialization; did you mean to separate the elements with a comma? [-Werror,-Wstring-concatenation]
"gpio14", "gpio15", "gpio16", "gpio17", "gpio18", "gpio19" "gpio20", "gpio21", "gpio22",
^
Add the missing comma that must have accidentally been removed.
Fixes: ac43c44a7a37 ("pinctrl: qcom: Add SDX55 pincontrol driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210323131728.2702789-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v5.12-2
* Fix regression in GPIO numbering in size based Intel pin control drivers
The following is an automated git shortlog grouped by driver:
intel:
- Show the GPIO base calculation explicitly
|
|
Fix SDC1_RCLK configurations which are in a different register so fix the
offset from 0xb3000 to 0xb3004.
Fixes: ecb454594c43: ("pinctrl: qcom: Add sc7280 pinctrl driver")
Reported-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1614662511-26519-2-git-send-email-rnayak@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The offsets for SDC_QDSD_PINGROUP and UFS_RESET were off by 0x100000
due to an issue in the scripts generating the data.
Fixes: ecb454594c43: ("pinctrl: qcom: Add sc7280 pinctrl driver")
Reported-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1614662511-26519-1-git-send-email-rnayak@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
If these fields are not set in dts, the driver will use these variables
uninitialized to set the fields. Not only will it set garbage values for
these fields, but it can overflow into other fields and break those.
In the current sm8250 dts, the dmic01 entries do not have a pullup setting,
and might not work without this change.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210304194816.3843-1-jonathan@marek.ca
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The restore in resume should match to suspend which only set for RK3288
SoCs pinctrl.
Fixes: 8dca933127024 ("pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume")
Reviewed-by: Jianqun Xu <jay.xu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Wang Panzhenzhuan <randy.wang@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210223100725.269240-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This patch fixes using a wrong register offset when configuring an IRQ
trigger type.
Fixes: be2dc859abd4 ("pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)")
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20210203123825.611576-1-lars.povlsen@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
During the split of intel_pinctrl_add_padgroups(), the _by_size() variant
missed the GPIO base calculations and hence made unable to retrieve proper
GPIO number.
Assign the gpio_base explicitly in _by_size() variant.
While at it, differentiate NOMAP case with the rest in _by_gpps() variant.
Fixes: 036e126c72eb ("pinctrl: intel: Split intel_pinctrl_add_padgroups() for better maintenance")
Reported-and-tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"A handful of new RISC-V related patches for this merge window:
- A check to ensure drivers are properly using uaccess. This isn't
manifesting with any of the drivers I'm currently using, but may
catch errors in new drivers.
- Some preliminary support for the FU740, along with the HiFive
Unleashed it will appear on.
- NUMA support for RISC-V, which involves making the arm64 code
generic.
- Support for kasan on the vmalloc region.
- A handful of new drivers for the Kendryte K210, along with the DT
plumbing required to boot on a handful of K210-based boards.
- Support for allocating ASIDs.
- Preliminary support for kernels larger than 128MiB.
- Various other improvements to our KASAN support, including the
utilization of huge pages when allocating the KASAN regions.
We may have already found a bug with the KASAN_VMALLOC code, but it's
passing my tests. There's a fix in the works, but that will probably
miss the merge window.
* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
riscv: Improve kasan population by using hugepages when possible
riscv: Improve kasan population function
riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
riscv: Improve kasan definitions
riscv: Get rid of MAX_EARLY_MAPPING_SIZE
soc: canaan: Sort the Makefile alphabetically
riscv: Disable KSAN_SANITIZE for vDSO
riscv: Remove unnecessary declaration
riscv: Add Canaan Kendryte K210 SD card defconfig
riscv: Update Canaan Kendryte K210 defconfig
riscv: Add Kendryte KD233 board device tree
riscv: Add SiPeed MAIXDUINO board device tree
riscv: Add SiPeed MAIX GO board device tree
riscv: Add SiPeed MAIX DOCK board device tree
riscv: Add SiPeed MAIX BiT board device tree
riscv: Update Canaan Kendryte K210 device tree
dt-bindings: add resets property to dw-apb-timer
dt-bindings: fix sifive gpio properties
dt-bindings: update sifive uart compatible string
dt-bindings: update sifive clint compatible string
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.12 kernel.
This time a calm set with no core changes.
New drivers/subdrivers:
- Renesas R8A7790A0 pin controller.
- Allwinner H616 and H616-R pin controllers.
- Qualcomm SM8350 and SC8180x pin controllers.
Improvements:
- Redo the DT bindings for Ralink RT2880.
- A common Qualcomm TLMM DT binding in YAML.
- Delete the unused drivers for U300, COH901, Sirf Atlas, and ZTE ZX"
* tag 'pinctrl-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (71 commits)
pinctrl: mediatek: Fix trigger type setting follow for unexpected interrupt
dt-bindings: pinctrl: Group tuples in pin control properties
pinctrl: nuvoton: npcm7xx: Fix alignment of table header comment
pinctrl: at91-pio4: fix "Prefer 'unsigned int' to bare use of 'unsigned'"
pinctrl: at91-pio4: add support for slew-rate
dt-bindings: pinctrl: at91-pio4: add slew-rate
pinctrl: actions: Add depends on || COMPILE_TEST
pinctrl: single: set function name when adding function
pinctrl: qcom: Add sc8180x TLMM driver
dt-bindings: pinctrl: qcom: Add sc8180x binding
dt-bindings: pinctrl: qcom: Define common TLMM binding
pinctrl: qcom: Add SM8350 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM8350 pinctrl bindings
pinctrl: samsung: use raw_spinlock for s3c64xx
dt-bindings: mediatek: mt8192: Fix dt_binding_check warning
pinctrl: qcom: spmi-mpp: Add PM8019 compatible
pinctrl: pinmux: add function selector to pinmux-functions
pinctrl: samsung: use raw_spinlock for locking
pinctrl: clarify #pinctrl-cells for pinctrl-single,pins
pinctrl: actions: Add the platform dependency to drivers
...
|
|
Add the pinctrl-k210.c pinctrl driver for the Canaan Kendryte K210
field programmable IO array (FPIOA) to allow configuring the SoC pin
functions. The K210 has 48 programmable pins which can take any of 256
possible functions.
This patch is inspired from the k210 pinctrl driver for the u-boot
project and contains many direct contributions from Sean Anderson.
The MAINTAINERS file is updated, adding the entry "CANAAN/KENDRYTE K210
SOC FPIOA DRIVER" with myself listed as maintainer for this driver.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Add the GPIO driver for Toshiba Visconti ARM SoCs.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
When flipping the polarity will be generated interrupt under certain
circumstances, but GPIO external signal has not changed.
Then, mask the interrupt before polarity setting, and clear the
unexpected interrupt after trigger type setting completed.
Remove mtk_eint_flip_edge: because mtk_eint_unmask already calls it.
Signed-off-by: Hailong Fan <hailong.fan@mediatek.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Link: https://lore.kernel.org/r/20210125041753.2214-1-hailong.fan@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Make it so that each column label is in the column that it is supposed
to refer to.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20210130162954.918803-1-j.neuschaefer@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fix "Prefer 'unsigned int' to bare use of 'unsigned'" checkpatch.pl
warning.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/1611747945-29960-4-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
SAMA7G5 supports slew rate configuration. Adapt the driver for this.
For output switching frequencies lower than 50MHz the slew rate needs to
be enabled. Since most of the pins on SAMA7G5 fall into this category
enabled the slew rate by default.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/1611747945-29960-3-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
I happened to apply the v1 of the patch restriction the
selection to ARM or ARM64, sorry for my sloppiness.
Fixing up the mistake as I can't back the patch out now.
Fixes: 5784921f7b6c ("pinctrl: actions: Add the platform dependency to drivers")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
pcs_add_function() fails to set the function name in struct pcs_function
when adding a new function. As a result this line in pcs_set_mux():
dev_dbg(pcs->dev, "enabling %s function%i\n",
func->name, fselector);
prints "(null)" for the function:
pinctrl-single 44e10800.pinmux: enabling (null) function0
pinctrl-single 44e10800.pinmux: enabling (null) function1
pinctrl-single 44e10800.pinmux: enabling (null) function2
pinctrl-single 44e10800.pinmux: enabling (null) function3
With this fix, the output is now:
pinctrl-single 44e10800.pinmux: enabling pinmux-uart0-pins function0
pinctrl-single 44e10800.pinmux: enabling pinmux-mmc0-pins function1
pinctrl-single 44e10800.pinmux: enabling pinmux-i2c0-pins function2
pinctrl-single 44e10800.pinmux: enabling pinmux-mmc0-pins function3
Cc: Jason Kridner <jkridner@beagleboard.org>
Cc: Robert Nelson <robertcnelson@beagleboard.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210125203542.51513-1-drew@beagleboard.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add pinctrl driver for the sc8180x TLMM block.
A noteworthy difference from previous TLMM blocks is that the registers
for GPIO 177 through 189 are for some reason offset from the typical
layout. Other than that the driver is same old...
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210126042650.1725176-3-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This adds pincontrol driver for tlmm block found in SM8350 SoC
This patch is based on initial code downstream by Raghavendra.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210205140132.274242-3-vkoul@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Convert spin_[lock|unlock] functions of pin bank to
raw_spinlock to support preempt-rt for pinctrl-s3c64xx. Below patch
converted spinlock_t to raw_spinlock_t but it didn't convert the
s3c64xx's spinlock.
Fixes: 1f306ecbe0f6 ("pinctrl: samsung: use raw_spinlock for locking")
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20210127001631.91209-1-chanho61.park@samsung.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
PM8019 provides 6 MPPs. Add a compatible to support them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210115171115.123155-2-konrad.dybcio@somainline.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v5.12-1
* Enable pin control on Intel Alder Lake-P
* Traverse through capabilities, convert them to features for the future use
The following is an automated git shortlog grouped by driver:
intel:
- Convert capability list to features
- Drop unnecessary check for predefined features
- Split intel_pinctrl_add_padgroups() for better maintenance
tigerlake:
- Add Alder Lake-P ACPI ID
|
|
Add the function selector to the pinmux-functions debugfs output. This
is an integer which is the index into the pinmux function tree. It will
make it easier to correlate function name to function selector without
having to count the lines in the output.
Example output of "pinmux-functions":
function 0: pinmux-uart0-pins, groups = [ pinmux-uart0-pins ]
function 1: pinmux-uart1-pins, groups = [ pinmux-uart1-pins ]
function 2: pinmux-uart2-pins, groups = [ pinmux-uart2-pins ]
function 3: pinmux-mmc0-pins, groups = [ pinmux-mmc0-pins ]
function 3: pinmux-mmc1-pins, groups = [ pinmux-mmc1-pins ]
function 5: pinmux-i2c0-pins, groups = [ pinmux-i2c0-pins ]
function 6: pinmux-i2c1-pins, groups = [ pinmux-i2c1-pins ]
function 7: pinmux-i2c2-pins, groups = [ pinmux-i2c2-pins ]
function 8: pinmux-pwm0-pins, groups = [ pinmux-pwm0-pins ]
function 9: pinmux-pwm1-pins, groups = [ pinmux-pwm1-pins ]
function 10: pinmux-adc-pins, groups = [ pinmux-adc-pins ]
Cc: Jason Kridner <jkridner@beagleboard.org>
Cc: Robert Nelson <robertcnelson@beagleboard.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210123202212.528046-1-drew@beagleboard.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This patch converts spin_[lock|unlock] functions of pin bank to
raw_spinlock to support preempt-rt. This can avoid BUG() assertion when
irqchip callbacks are triggerred. Spinlocks can be converted rt_mutex
which is preemptible when we apply preempt-rt patches.
According to "Documentation/driver-api/gpio/driver.rst",
"Realtime considerations: a realtime compliant GPIO driver should not
use spinlock_t or any sleepable APIs (like PM runtime) as part of its
irqchip implementation.
- spinlock_t should be replaced with raw_spinlock_t.[1]
"
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210121030009.25673-1-chanho61.park@samsung.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The Actions Semi pinctrl drivers are a mix of both ARM32 and ARM64
platforms. So let's add the correct platform dependency to avoid them
being selected on the other.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210121062547.27173-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
There are only two pins left now, used to connect to the PMIC via I2C.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210118020848.11721-6-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Port A is used for an internal connection to some analogue circuitry
which looks like an AC200 IP (as in the H6), though this is not
mentioned in the manual.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20210118020848.11721-5-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
- Add otg function and otg-vbus group.
- Add lcd-8bit, lcd-16bit, lcd-18bit, lcd-generic and lcd-special
groups. Change the lcd-24bit group so that it only selects the pins
that aren't in the lcd-18bit and lcd-generic groups (which breaks
Device Tree in theory, but there is none out there for any JZ4760
based board, yet). Remove the lcd-no-pins group which is just useless.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210120110722.20133-1-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120132045.2127659-6-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120132045.2127659-5-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/r/20210120132045.2127659-4-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120132045.2127659-3-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fix the follow coccicheck warnings:
./drivers/pinctrl/bcm/pinctrl-ns2-mux.c:856:29-38: WARNING:
Comparison to bool.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Link: https://lore.kernel.org/r/1610705349-24310-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Tested on a JZ4740 system (ARCH=mips make qi_lb60_defconfig), this saves
about 14 KiB, by allowing the compiler to garbage-collect all the
functions and tables that correspond to SoCs that were disabled in the
config.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201213235447.138271-2-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.12
- Restrict debug runtime-checks to Renesas platforms,
- Initial support for the R-Car V3U SoC.
|
|
In Linux, if a driver does disable_irq() and later does enable_irq()
on its interrupt, I believe it's expecting these properties:
* If an interrupt was pending when the driver disabled then it will
still be pending after the driver re-enables.
* If an edge-triggered interrupt comes in while an interrupt is
disabled it should assert when the interrupt is re-enabled.
If you think that the above sounds a lot like the disable_irq() and
enable_irq() are supposed to be masking/unmasking the interrupt
instead of disabling/enabling it then you've made an astute
observation. Specifically when talking about interrupts, "mask"
usually means to stop posting interrupts but keep tracking them and
"disable" means to fully shut off interrupt detection. It's
unfortunate that this is so confusing, but presumably this is all the
way it is for historical reasons.
Perhaps more confusing than the above is that, even though clients of
IRQs themselves don't have a way to request mask/unmask
vs. disable/enable calls, IRQ chips themselves can implement both.
...and yet more confusing is that if an IRQ chip implements
disable/enable then they will be called when a client driver calls
disable_irq() / enable_irq().
It does feel like some of the above could be cleared up. However,
without any other core interrupt changes it should be clear that when
an IRQ chip gets a request to "disable" an IRQ that it has to treat it
like a mask of that IRQ.
In any case, after that long interlude you can see that the "unmask
and clear" can break things. Maulik tried to fix it so that we no
longer did "unmask and clear" in commit 71266d9d3936 ("pinctrl: qcom:
Move clearing pending IRQ to .irq_request_resources callback"), but it
only handled the PDC case and it had problems (it caused
sc7180-trogdor devices to fail to suspend). Let's fix.
>From my understanding the source of the phantom interrupt in the
were these two things:
1. One that could have been introduced in msm_gpio_irq_set_type()
(only for the non-PDC case).
2. Edges could have been detected when a GPIO was muxed away.
Fixing case #1 is easy. We can just add a clear in
msm_gpio_irq_set_type().
Fixing case #2 is harder. Let's use a concrete example. In
sc7180-trogdor.dtsi we configure the uart3 to have two pinctrl states,
sleep and default, and mux between the two during runtime PM and
system suspend (see geni_se_resources_{on,off}() for more
details). The difference between the sleep and default state is that
the RX pin is muxed to a GPIO during sleep and muxed to the UART
otherwise.
As per Qualcomm, when we mux the pin over to the UART function the PDC
(or the non-PDC interrupt detection logic) is still watching it /
latching edges. These edges don't cause interrupts because the
current code masks the interrupt unless we're entering suspend.
However, as soon as we enter suspend we unmask the interrupt and it's
counted as a wakeup.
Let's deal with the problem like this:
* When we mux away, we'll mask our interrupt. This isn't necessary in
the above case since the client already masked us, but it's a good
idea in general.
* When we mux back will clear any interrupts and unmask.
Fixes: 4b7618fdc7e6 ("pinctrl: qcom: Add irq_enable callback for msm gpio")
Fixes: 71266d9d3936 ("pinctrl: qcom: Move clearing pending IRQ to .irq_request_resources callback")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210114191601.v7.4.I7cf3019783720feb57b958c95c2b684940264cd1@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
In commit 4b7618fdc7e6 ("pinctrl: qcom: Add irq_enable callback for
msm gpio") we tried to Ack interrupts during unmask. However, that
patch forgot to check "intr_ack_high" so, presumably, it only worked
for a certain subset of SoCs.
Let's add a small accessor so we don't need to open-code the logic in
both places.
This was found by code inspection. I don't have any access to the
hardware in question nor software that needs the Ack during unmask.
Fixes: 4b7618fdc7e6 ("pinctrl: qcom: Add irq_enable callback for msm gpio")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210114191601.v7.3.I32d0f4e174d45363b49ab611a13c3da8f1e87d0f@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When the Qualcomm pinctrl driver wants to Ack an interrupt, it does a
read-modify-write on the interrupt status register. On some SoCs it
makes sure that the status bit is 1 to "Ack" and on others it makes
sure that the bit is 0 to "Ack". Presumably the first type of
interrupt controller is a "write 1 to clear" type register and the
second just let you directly set the interrupt status register.
As far as I can tell from scanning structure definitions, the
interrupt status bit is always in a register by itself. Thus with
both types of interrupt controllers it is safe to "Ack" interrupts
without doing a read-modify-write. We can do a simple write.
It should be noted that if the interrupt status bit _was_ ever in a
register with other things (like maybe status bits for other GPIOs):
a) For "write 1 clear" type controllers then read-modify-write would
be totally wrong because we'd accidentally end up clearing
interrupts we weren't looking at.
b) For "direct set" type controllers then read-modify-write would also
be wrong because someone setting one of the other bits in the
register might accidentally clear (or set) our interrupt.
I say this simply to show that the current read-modify-write doesn't
provide any sort of "future proofing" of the code. In fact (for
"write 1 clear" controllers) the new code is slightly more "future
proof" since it would allow more than one interrupt status bits to
share a register.
NOTE: this code fixes no bugs--it simply avoids an extra register
read.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210114191601.v7.2.I3635de080604e1feda770591c5563bd6e63dd39d@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
There's currently a comment in the code saying function 0 is GPIO.
Instead of hardcoding it, let's add a member where an SoC can specify
it. No known SoCs use a number other than 0, but this just makes the
code clearer. NOTE: no SoC code needs to be updated since we can rely
on zero-initialization.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210114191601.v7.1.I3ad184e3423d8e479bc3e86f5b393abb1704a1d1@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fix the following coccicheck warning:
./drivers/pinctrl/sprd/pinctrl-sprd.c:690:8-23: WARNING: Comparison to
bool
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/1610440080-68600-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
