| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Fixes 2018-11-28
This series contains fixes to igb, ixgbe and i40e.
Yunjian Wang from Huawei resolves a variable that could potentially be
NULL before it is used.
Lihong fixes an i40e issue which goes back to 4.17 kernels, where
deleting any of the MAC filters was causing the incorrect syncing for
the PF.
Josh Elsasser caught that there were missing enum values in the link
capabilities for x550 devices, which was preventing link for 1000BaseLX
SFP modules.
Jan fixes the function header comments for XSK methods.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The net device ndev is freed via free_netdev when failing to register
the device. The control flow then jumps to the error handling code
block. ndev is used and freed again. Resulting in a use-after-free bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb is freed via dev_kfree_skb_any, however, skb->len is read then. This
may result in a use-after-free bug.
Fixes: e6161d64263 ("rapidio/rionet: rework driver initialization and removal")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One method, xsk_umem_setup, had an incorrect kernel doc
description, which has been corrected.
Also fixes small typos found in the comments.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Add the two 1000BaseLX enum values to the X550's check for 1Gbps modules,
allowing the core driver code to establish a link over this SFP type.
This is done by the out-of-tree driver but the fix wasn't in mainline.
Fixes: e23f33367882 ("ixgbe: Fix 1G and 10G link stability for X550EM_x SFP+”)
Fixes: 6a14ee0cfb19 ("ixgbe: Add X550 support function pointers")
Signed-off-by: Josh Elsasser <jelsasser@appneta.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
In __i40e_del_filter function, the flag __I40E_MACVLAN_SYNC_PENDING for
the PF state is wrongly set for the VSI. Deleting any of the MAC filters
has caused the incorrect syncing for the PF. Fix it by setting this state
flag to the intended PF.
CC: stable <stable@vger.kernel.org>
Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch fixes the variable 'phy_word' may be used uninitialized.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This driver was designed to work with both LAN7430 and LAN7431.
The only difference between the two is the LAN7431 has support
for external phy.
This change adds LAN7431 to the list of recognized devices
supported by this driver.
Updates for v2:
changed 'fixes' tag to match defined format
fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The lan743x driver, when under heavy traffic load, has been noticed
to sometimes hang, or cause a kernel panic.
Debugging reveals that the TX napi poll routine was returning
the wrong value, 'weight'. Most other drivers return 0.
And call napi_complete, instead of napi_complete_done.
Additionally when creating the tx napi poll routine.
Changed netif_napi_add, to netif_tx_napi_add.
Updates for v3:
changed 'fixes' tag to match defined format
Updates for v2:
use napi_complete, instead of napi_complete_done in
lan743x_tx_napi_poll
use netif_tx_napi_add, instead of netif_napi_add for
registration of tx napi poll routine
fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The text in array velocity_gstrings contains a spelling mistake,
rename rx_frame_alignement_errors to rx_frame_alignment_errors.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The text in array s_igu_fifo_error_strs contains a spelling mistake,
fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a possible NULL pointer dereference in nic_remove routine
removing the nicpf module if nic_probe fails.
The issue can be triggered with the following reproducer:
$rmmod nicvf
$rmmod nicpf
[ 521.412008] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000014
[ 521.422777] Mem abort info:
[ 521.425561] ESR = 0x96000004
[ 521.428624] Exception class = DABT (current EL), IL = 32 bits
[ 521.434535] SET = 0, FnV = 0
[ 521.437579] EA = 0, S1PTW = 0
[ 521.440730] Data abort info:
[ 521.443603] ISV = 0, ISS = 0x00000004
[ 521.447431] CM = 0, WnR = 0
[ 521.450417] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000072a3da42
[ 521.457022] [0000000000000014] pgd=0000000000000000
[ 521.461916] Internal error: Oops: 96000004 [#1] SMP
[ 521.511801] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018
[ 521.518664] pstate: 80400005 (Nzcv daif +PAN -UAO)
[ 521.523451] pc : nic_remove+0x24/0x88 [nicpf]
[ 521.527808] lr : pci_device_remove+0x48/0xd8
[ 521.532066] sp : ffff000013433cc0
[ 521.535370] x29: ffff000013433cc0 x28: ffff810f6ac50000
[ 521.540672] x27: 0000000000000000 x26: 0000000000000000
[ 521.545974] x25: 0000000056000000 x24: 0000000000000015
[ 521.551274] x23: ffff8007ff89a110 x22: ffff000001667070
[ 521.556576] x21: ffff8007ffb170b0 x20: ffff8007ffb17000
[ 521.561877] x19: 0000000000000000 x18: 0000000000000025
[ 521.567178] x17: 0000000000000000 x16: 000000000000010ffc33ff98 x8 : 0000000000000000
[ 521.593683] x7 : 0000000000000000 x6 : 0000000000000001
[ 521.598983] x5 : 0000000000000002 x4 : 0000000000000003
[ 521.604284] x3 : ffff8007ffb17184 x2 : ffff8007ffb17184
[ 521.609585] x1 : ffff000001662118 x0 : ffff000008557be0
[ 521.614887] Process rmmod (pid: 1897, stack limit = 0x00000000859535c3)
[ 521.621490] Call trace:
[ 521.623928] nic_remove+0x24/0x88 [nicpf]
[ 521.627927] pci_device_remove+0x48/0xd8
[ 521.631847] device_release_driver_internal+0x1b0/0x248
[ 521.637062] driver_detach+0x50/0xc0
[ 521.640628] bus_remove_driver+0x60/0x100
[ 521.644627] driver_unregister+0x34/0x60
[ 521.648538] pci_unregister_driver+0x24/0xd8
[ 521.652798] nic_cleanup_module+0x14/0x111c [nicpf]
[ 521.657672] __arm64_sys_delete_module+0x150/0x218
[ 521.662460] el0_svc_handler+0x94/0x110
[ 521.666287] el0_svc+0x8/0xc
[ 521.669160] Code: aa1e03e0 9102c295 d503201f f9404eb3 (b9401660)
Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After switching the r8169 driver to use phylib some user reported that
their network is broken. This was caused by the genphy PHY driver being
used instead of the dedicated PHY driver for the RTL8211B. Users
reported that loading the Realtek PHY driver module upfront fixes the
issue. See also this mail thread:
https://marc.info/?t=154279781800003&r=1&w=2
The issue is quite weird and the root cause seems to be somewhere in
the base driver core. The patch works around the issue and may be
removed once the actual issue is fixed.
The Fixes tag refers to the first reported occurrence of the issue.
The issue itself may have been existing much longer and it may affect
users of other network chips as well. Users typically will recognize
this issue only if their PHY stops working when being used with the
genphy driver.
Fixes: f1e911d5d0df ("r8169: add basic phylib support")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bug is not easily reproducable, as it may occur very infrequently
(we had machines with 20minutes heavy downloading before it occurred)
However, on a virual machine (VMWare on Windows 10 host) it occurred
pretty frequently (1-2 seconds after a speedtest was started)
dev->tx_skb mab be freed via dev_kfree_skb_irq on a callback
before it is set.
This causes the following problems:
- double free of the skb or potential memory leak
- in dmesg: 'recvmsg bug' and 'recvmsg bug 2' and eventually
general protection fault
Example dmesg output:
[ 134.841986] ------------[ cut here ]------------
[ 134.841987] recvmsg bug: copied 9C24A555 seq 9C24B557 rcvnxt 9C25A6B3 fl 0
[ 134.841993] WARNING: CPU: 7 PID: 2629 at /build/linux-hwe-On9fm7/linux-hwe-4.15.0/net/ipv4/tcp.c:1865 tcp_recvmsg+0x44d/0xab0
[ 134.841994] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi
[ 134.842046] CPU: 7 PID: 2629 Comm: python Tainted: G W OE 4.15.0-34-generic #37~16.04.1-Ubuntu
[ 134.842046] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[ 134.842048] RIP: 0010:tcp_recvmsg+0x44d/0xab0
[ 134.842048] RSP: 0018:ffffa6630422bcc8 EFLAGS: 00010286
[ 134.842049] RAX: 0000000000000000 RBX: ffff997616f4f200 RCX: 0000000000000006
[ 134.842049] RDX: 0000000000000007 RSI: 0000000000000082 RDI: ffff9976257d6490
[ 134.842050] RBP: ffffa6630422bd98 R08: 0000000000000001 R09: 000000000004bba4
[ 134.842050] R10: 0000000001e00c6f R11: 000000000004bba4 R12: ffff99760dee3000
[ 134.842051] R13: 0000000000000000 R14: ffff99760dee3514 R15: 0000000000000000
[ 134.842051] FS: 00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000
[ 134.842052] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 134.842053] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0
[ 134.842055] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 134.842055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 134.842057] Call Trace:
[ 134.842060] ? aa_sk_perm+0x53/0x1a0
[ 134.842064] inet_recvmsg+0x51/0xc0
[ 134.842066] sock_recvmsg+0x43/0x50
[ 134.842070] SYSC_recvfrom+0xe4/0x160
[ 134.842072] ? __schedule+0x3de/0x8b0
[ 134.842075] ? ktime_get_ts64+0x4c/0xf0
[ 134.842079] SyS_recvfrom+0xe/0x10
[ 134.842082] do_syscall_64+0x73/0x130
[ 134.842086] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 134.842086] RIP: 0033:0x7fe331f5a81d
[ 134.842088] RSP: 002b:00007ffe8da98398 EFLAGS: 00000246 ORIG_RAX: 000000000000002d
[ 134.842090] RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 00007fe331f5a81d
[ 134.842094] RDX: 00000000000003fb RSI: 0000000001e00874 RDI: 0000000000000003
[ 134.842095] RBP: 00007fe32f642c70 R08: 0000000000000000 R09: 0000000000000000
[ 134.842097] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe332347698
[ 134.842099] R13: 0000000001b7e0a0 R14: 0000000001e00874 R15: 0000000000000000
[ 134.842103] Code: 24 fd ff ff e9 cc fe ff ff 48 89 d8 41 8b 8c 24 10 05 00 00 44 8b 45 80 48 c7 c7 08 bd 59 8b 48 89 85 68 ff ff ff e8 b3 c4 7d ff <0f> 0b 48 8b 85 68 ff ff ff e9 e9 fe ff ff 41 8b 8c 24 10 05 00
[ 134.842126] ---[ end trace b7138fc08c83147f ]---
[ 134.842144] general protection fault: 0000 [#1] SMP PTI
[ 134.842145] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi
[ 134.842161] CPU: 7 PID: 2629 Comm: python Tainted: G W OE 4.15.0-34-generic #37~16.04.1-Ubuntu
[ 134.842162] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[ 134.842164] RIP: 0010:tcp_close+0x2c6/0x440
[ 134.842165] RSP: 0018:ffffa6630422bde8 EFLAGS: 00010202
[ 134.842167] RAX: 0000000000000000 RBX: ffff99760dee3000 RCX: 0000000180400034
[ 134.842168] RDX: 5c4afd407207a6c4 RSI: ffffe868495bd300 RDI: ffff997616f4f200
[ 134.842169] RBP: ffffa6630422be08 R08: 0000000016f4d401 R09: 0000000180400034
[ 134.842169] R10: ffffa6630422bd98 R11: 0000000000000000 R12: 000000000000600c
[ 134.842170] R13: 0000000000000000 R14: ffff99760dee30c8 R15: ffff9975bd44fe00
[ 134.842171] FS: 00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000
[ 134.842173] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 134.842174] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0
[ 134.842177] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 134.842178] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 134.842179] Call Trace:
[ 134.842181] inet_release+0x42/0x70
[ 134.842183] __sock_release+0x42/0xb0
[ 134.842184] sock_close+0x15/0x20
[ 134.842187] __fput+0xea/0x220
[ 134.842189] ____fput+0xe/0x10
[ 134.842191] task_work_run+0x8a/0xb0
[ 134.842193] exit_to_usermode_loop+0xc4/0xd0
[ 134.842195] do_syscall_64+0xf4/0x130
[ 134.842197] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 134.842197] RIP: 0033:0x7fe331f5a560
[ 134.842198] RSP: 002b:00007ffe8da982e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
[ 134.842200] RAX: 0000000000000000 RBX: 00007fe32f642c70 RCX: 00007fe331f5a560
[ 134.842201] RDX: 00000000008f5320 RSI: 0000000001cd4b50 RDI: 0000000000000003
[ 134.842202] RBP: 00007fe32f6500f8 R08: 000000000000003c R09: 00000000009343c0
[ 134.842203] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe32f6500d0
[ 134.842204] R13: 00000000008f5320 R14: 00000000008f5320 R15: 0000000001cd4770
[ 134.842205] Code: c8 00 00 00 45 31 e4 49 39 fe 75 4d eb 50 83 ab d8 00 00 00 01 48 8b 17 48 8b 47 08 48 c7 07 00 00 00 00 48 c7 47 08 00 00 00 00 <48> 89 42 08 48 89 10 0f b6 57 34 8b 47 2c 2b 47 28 83 e2 01 80
[ 134.842226] RIP: tcp_close+0x2c6/0x440 RSP: ffffa6630422bde8
[ 134.842227] ---[ end trace b7138fc08c831480 ]---
The proposed patch eliminates a potential racing condition.
Before, usb_submit_urb was called and _after_ that, the skb was attached
(dev->tx_skb). So, on a callback it was possible, however unlikely that the
skb was freed before it was set. That way (because dev->tx_skb was not set
to NULL after it was freed), it could happen that a skb from a earlier
transmission was freed a second time (and the skb we should have freed did
not get freed at all)
Now we free the skb directly in ipheth_tx(). It is not passed to the
callback anymore, eliminating the posibility of a double free of the same
skb. Depending on the retval of usb_submit_urb() we use dev_kfree_skb_any()
respectively dev_consume_skb_any() to free the skb.
Signed-off-by: Oliver Zweigle <Oliver.Zweigle@faro.com>
Signed-off-by: Bernd Eckstein <3ernd.Eckstein@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The TX stats should be started with the tx_stats_syncp,
there seems to be a copy/paste error in the driver.
Signed-off-by: Andreas Fiedler <andreas.fiedler@gmx.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The vsc85xx_default_config function called in the vsc85xx_config_init
function which is used by VSC8530, VSC8531, VSC8540 and VSC8541 PHYs
mistakenly calls phy_read and phy_write in-between phy_select_page and
phy_restore_page.
phy_select_page and phy_restore_page actually take and release the MDIO
bus lock and phy_write and phy_read take and release the lock to write
or read to a PHY register.
Let's fix this deadlock by using phy_modify_paged which handles
correctly a read followed by a write in a non-standard page.
Fixes: 6a0bfbbe20b0 ("net: phy: mscc: migrate to phy_select/restore_page functions")
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reset snd_queue tso_hdrs pointer to NULL in nicvf_free_snd_queue routine
since it is used to check if tso dma descriptor queue has been previously
allocated. The issue can be triggered with the following reproducer:
$ip link set dev enP2p1s0v0 xdpdrv obj xdp_dummy.o
$ip link set dev enP2p1s0v0 xdpdrv off
[ 341.467649] WARNING: CPU: 74 PID: 2158 at mm/vmalloc.c:1511 __vunmap+0x98/0xe0
[ 341.515010] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018
[ 341.521874] pstate: 60400005 (nZCv daif +PAN -UAO)
[ 341.526654] pc : __vunmap+0x98/0xe0
[ 341.530132] lr : __vunmap+0x98/0xe0
[ 341.533609] sp : ffff00001c5db860
[ 341.536913] x29: ffff00001c5db860 x28: 0000000000020000
[ 341.542214] x27: ffff810feb5090b0 x26: ffff000017e57000
[ 341.547515] x25: 0000000000000000 x24: 00000000fbd00000
[ 341.552816] x23: 0000000000000000 x22: ffff810feb5090b0
[ 341.558117] x21: 0000000000000000 x20: 0000000000000000
[ 341.563418] x19: ffff000017e57000 x18: 0000000000000000
[ 341.568719] x17: 0000000000000000 x16: 0000000000000000
[ 341.574020] x15: 0000000000000010 x14: ffffffffffffffff
[ 341.579321] x13: ffff00008985eb27 x12: ffff00000985eb2f
[ 341.584622] x11: ffff0000096b3000 x10: ffff00001c5db510
[ 341.589923] x9 : 00000000ffffffd0 x8 : ffff0000086868e8
[ 341.595224] x7 : 3430303030303030 x6 : 00000000000006ef
[ 341.600525] x5 : 00000000003fffff x4 : 0000000000000000
[ 341.605825] x3 : 0000000000000000 x2 : ffffffffffffffff
[ 341.611126] x1 : ffff0000096b3728 x0 : 0000000000000038
[ 341.616428] Call trace:
[ 341.618866] __vunmap+0x98/0xe0
[ 341.621997] vunmap+0x3c/0x50
[ 341.624961] arch_dma_free+0x68/0xa0
[ 341.628534] dma_direct_free+0x50/0x80
[ 341.632285] nicvf_free_resources+0x160/0x2d8 [nicvf]
[ 341.637327] nicvf_config_data_transfer+0x174/0x5e8 [nicvf]
[ 341.642890] nicvf_stop+0x298/0x340 [nicvf]
[ 341.647066] __dev_close_many+0x9c/0x108
[ 341.650977] dev_close_many+0xa4/0x158
[ 341.654720] rollback_registered_many+0x140/0x530
[ 341.659414] rollback_registered+0x54/0x80
[ 341.663499] unregister_netdevice_queue+0x9c/0xe8
[ 341.668192] unregister_netdev+0x28/0x38
[ 341.672106] nicvf_remove+0xa4/0xa8 [nicvf]
[ 341.676280] nicvf_shutdown+0x20/0x30 [nicvf]
[ 341.680630] pci_device_shutdown+0x44/0x88
[ 341.684720] device_shutdown+0x144/0x250
[ 341.688640] kernel_restart_prepare+0x44/0x50
[ 341.692986] kernel_restart+0x20/0x68
[ 341.696638] __se_sys_reboot+0x210/0x238
[ 341.700550] __arm64_sys_reboot+0x24/0x30
[ 341.704555] el0_svc_handler+0x94/0x110
[ 341.708382] el0_svc+0x8/0xc
[ 341.711252] ---[ end trace 3f4019c8439959c9 ]---
[ 341.715874] page:ffff7e0003ef4000 count:0 mapcount:0 mapping:0000000000000000 index:0x4
[ 341.723872] flags: 0x1fffe000000000()
[ 341.727527] raw: 001fffe000000000 ffff7e0003f1a008 ffff7e0003ef4048 0000000000000000
[ 341.735263] raw: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000
[ 341.742994] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
where xdp_dummy.c is a simple bpf program that forwards the incoming
frames to the network stack (available here:
https://github.com/altoor/xdp_walkthrough_examples/blob/master/sample_1/xdp_dummy.c)
Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support")
Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
This place doesn't do that, so fix it.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin()
will send multicast join group message to notify peers. We should do this when
enabling/changed to a new port. But it doesn't make sense to do it when a port
is disabled.
On the other hand, when we set mcast_rejoin_count to 2, and do a failover,
team_port_disable() will increase mcast_rejoin.count_pending to 2 and then
team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send
4 mcast rejoin messages at latest, which will make user confused. The same
with notify_peers.count.
Fix it by deleting team_notify_peers() and team_mcast_rejoin() in
team_port_disable().
Reported-by: Liang Li <liali@redhat.com>
Fixes: fc423ff00df3a ("team: add peer notification")
Fixes: 492b200efdd20 ("team: add support for sending multicast rejoins")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We don't support partial csumed packet since its metadata will be lost
or incorrect during XDP processing. So fail the XDP set if guest_csum
feature is negotiated.
Fixes: f600b6905015 ("virtio_net: Add XDP support")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Pavel Popa <pashinho1990@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We don't disable VIRTIO_NET_F_GUEST_CSUM if XDP was set. This means we
can receive partial csumed packets with metadata kept in the
vnet_hdr. This may have several side effects:
- It could be overridden by header adjustment, thus is might be not
correct after XDP processing.
- There's no way to pass such metadata information through
XDP_REDIRECT to another driver.
- XDP does not support checksum offload right now.
So simply disable guest csum if possible in this the case of XDP.
Fixes: 3f93522ffab2d ("virtio-net: switch off offloads on demand if possible on XDP set")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Pavel Popa <pashinho1990@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During device reset, queue memory is not being updated to accommodate
changes in ring buffer sizes supported by backing hardware. Track
any differences in ring buffer sizes following the reset and update
queue memory when possible.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The wrong index is used when cleaning up RX buffer objects during release
of RX queues. Update to use the correct index counter.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set xdp_prog pointer to NULL if bpf_prog_add fails since that routine
reports the error code instead of NULL in case of failure and xdp_prog
pointer value is used in the driver to verify if XDP is currently
enabled.
Moreover report the error code to userspace if nicvf_xdp_setup fails
Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
interrupts
In the original ftmac100_interrupt(), the interrupts are only disabled when
the condition "netif_running(netdev)" is true. However, this condition
causes kerenl hang in the following case. When the user requests to
disable the network device, kernel will clear the bit __LINK_STATE_START
from the dev->state and then call the driver's ndo_stop function. Network
device interrupts are not blocked during this process. If an interrupt
occurs between clearing __LINK_STATE_START and stopping network device,
kernel cannot disable the interrupts due to the condition
"netif_running(netdev)" in the ISR. Hence, kernel will hang due to the
continuous interruption of the network device.
In order to solve the above problem, the interrupts of the network device
should always be disabled in the ISR without being restricted by the
condition "netif_running(netdev)".
[V2]
Remove unnecessary curly braces.
Signed-off-by: Vincent Chen <vincentc@andestech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.20
First set of fixes for 4.20, this time we have quite a few them but
all very small.
ath9k
* fix a locking regression found by a static checker
wlcore
* fix a crash which was a regression with wakeirq handling
brcm80211
* yet another fix for 160 MHz channel handling
mt76
* fix a longstaning build problem when CONFIG_LEDS_CLASS is disabled
* don't use uninitialised mutex
iwlwifi
* do note that the iwlwifi merge tag (commit 4ec321c14693) seems to
contain wrong list of changes so ignore that
* fix ACPI data handling, a memory leak and other smaller fixes
ath10k
* fix a crash during suspend which was a recent regression
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch has the fix to avoid PHY lockup with 5717/5719/5720 in change
ring and flow control paths. This patch solves the RX hang while doing
continuous ring or flow control parameters with heavy traffic from peer.
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2018-11-19
The following fixes are for mlx5 core and netdev driver.
For -stable v4.16
bc7fda7d4637 ('net/mlx5e: IPoIB, Reset QP after channels are closed')
For -stable v4.17
36917a270395 ('net/mlx5: IPSec, Fix the SA context hash key')
For -stable v4.18
6492a432be3a ('net/mlx5e: Always use the match level enum when parsing TC rule match')
c3f81be236b1 ('net/mlx5e: Removed unnecessary warnings in FEC caps query')
c5ce2e736b64 ('net/mlx5e: Fix selftest for small MTUs')
For -stable v4.19
effcd896b25e ('net/mlx5e: Adjust to max number of channles when re-attaching')
394cbc5acd68 ('net/mlx5e: RX, verify received packet size in Linear Striding RQ')
447cbb3613c8 ('net/mlx5e: Don't match on vlan non-existence if ethertype is wildcarded')
c223c1574612 ('net/mlx5e: Claim TC hw offloads support only under a proper build config')
Please pull and let me know if there's any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch changes to use rtnl_lock only during a reset to avoid
deadlock that could occur when a thread operating close is holding
rtnl_lock and waiting for reset_lock acquired by another thread,
which is waiting for rtnl_lock in order to set the number of tx/rx
queues during a reset.
Also, we now setting the number of tx/rx queues during a soft reset
for failover or LPM events.
Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The getter callers doesn't know the valid Physical Queues (PQ) values.
This patch makes sure that a valid PQ will always be returned.
The patch consists of 3 fixes:
- When qed_init_qm_get_idx_from_flags() receives a disabled flag, it
returned PQ 0, which can potentially be another function's pq. Verify
that flag is enabled, otherwise return default start_pq.
- When qed_init_qm_get_idx_from_flags() receives an unknown flag, it
returned NULL and could lead to a segmentation fault. Return default
start_pq instead.
- A modulo operation was added to MCOS/VFS PQ getters to make sure the
PQ returned is in range of the required flag.
Fixes: b5a9ee7cf3be ("qed: Revise QM cofiguration")
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the condition which verifies that only one flag is set. The API
bitmap_weight() should receive size in bits instead of bytes.
Fixes: b5a9ee7cf3be ("qed: Revise QM cofiguration")
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If FEC caps query fails when executing 'ethtool <interface>'
the whole callback fails unnecessarily, fixed that by replacing the
error return code with debug logging only.
Fixes: 6cfa94605091 ("net/mlx5e: Ethtool driver callback for query/set FEC policy")
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Querying interface FEC caps with 'ethtool [int]' after link reset
throws warning regading link speed.
This warning is not needed as there is already an indication in
user space that the link is not up.
Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
This bug would result in reading wrong FEC capabilities for 10G/40G.
Fixes: 2095b2641477 ("net/mlx5e: Add port FEC get/set functions")
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Some speeds don't support turning FEC policy off. In case a requested
FEC policy is not supported for a speed (including current speed), its new
FEC policy would be:
no FEC - if disabling FEC is supported for that speed
unchanged - else
Fixes: 2095b2641477 ("net/mlx5e: Add port FEC get/set functions")
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Update driver version due to critical bug fixes.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In ena_remove() we have the following stack call:
ena_remove()
unregister_netdev()
ena_destroy_device()
netif_carrier_off()
Calling netif_carrier_off() causes linkwatch to try to handle the
link change event on the already unregistered netdev, which leads
to a read from an unreadable memory address.
This patch switches the order of the two functions, so that
netif_carrier_off() is called on a regiestered netdev.
To accomplish this fix we also had to:
1. Remove the set bit ENA_FLAG_TRIGGER_RESET
2. Add a sanitiy check in ena_close()
both to prevent double device reset (when calling unregister_netdev()
ena_close is called, but the device was already deleted in
ena_destroy_device()).
3. Set the admin_queue running state to false to avoid using it after
device was reset (for example when calling ena_destroy_all_io_queues()
right after ena_com_dev_reset() in ena_down)
Fixes: 944b28aa2982 ("net: ena: fix missing lock during device destruction")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During resume from hibernation if ena_restore_device fails,
ena_com_dev_reset() is called, and uses the readless read mechanism,
which was already destroyed by the call to
ena_com_mmio_reg_read_request_destroy(). This causes a NULL pointer
reference.
In this commit we switch the call order of the above two functions
to avoid this crash.
Fixes: d7703ddbd7c9 ("net: ena: fix rare bug when failed restart/resume is followed by driver removal")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Loopback test had fixed packet size, which can be bigger than configured
MTU. Shorten the loopback packet size to be bigger than minimal MTU
allowed by the device. Text field removed from struct 'mlx5ehdr'
as redundant to allow send small packets as minimal allowed MTU.
Fixes: d605d66 ("net/mlx5e: Add support for ethtool self diagnostics test")
Signed-off-by: Valentine Fatiev <valentinef@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In case of striding RQ, we use MPWRQ (Multi Packet WQE RQ), which means
that WQE (RX descriptor) can be used for many packets and so the WQE is
much bigger than MTU. In virtualization setups where the port mtu can
be larger than the vf mtu, if received packet is bigger than MTU, it
won't be dropped by HW on too small receive WQE. If we use linear SKB in
striding RQ, since each stride has room for mtu size payload and skb
info, an oversized packet can lead to crash for crossing allocated page
boundary upon the call to build_skb. So driver needs to check packet
size and drop it.
Introduce new SW rx counter, rx_oversize_pkts_sw_drop, which counts the
number of packets dropped by the driver for being too large.
As a new field is added to the RQ struct, re-open the channels whenever
this field is being used in datapath (i.e., in the case of linear
Striding RQ).
Fixes: 619a8f2a42f1 ("net/mlx5e: Use linear SKB in Striding RQ")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The mirror and not the output count is the one denoting a split.
Fix to condition the offload attempt on the mirror count being > 0
along the firmware to have the related capability.
Fixes: 592d36515969 ("net/mlx5e: Parse mirroring action for offloaded TC eswitch flows")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Yossi Kuperman <yossiku@mellanox.com>
Reviewed-by: Chris Mi <chrism@mellanox.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When core driver enters deattach/attach flow after pci reset,
Number of logical CPUs may have changed.
As a result we need to update the cpu affiliated resource tables.
1. indirect rqt list
2. eq table
Reproduction (PowerPC):
echo 1000 > /sys/kernel/debug/powerpc/eeh_max_freezes
ppc64_cpu --smt=on
# Restart driver
modprobe -r ... ; modprobe ...
# Link up
ifconfig ...
# Only physical CPUs
ppc64_cpu --smt=off
# Inject PCI errors so PCI will reset - calling the pci error handler
echo 0x8000000000000000 > /sys/kernel/debug/powerpc/<PCI BUS>/err_injct_inboundA
Call trace when trying to add non-existing rqs to an indirect rqt:
mlx5e_redirect_rqt+0x84/0x260 [mlx5_core] (unreliable)
mlx5e_redirect_rqts+0x188/0x190 [mlx5_core]
mlx5e_activate_priv_channels+0x488/0x570 [mlx5_core]
mlx5e_open_locked+0xbc/0x140 [mlx5_core]
mlx5e_open+0x50/0x130 [mlx5_core]
mlx5e_nic_enable+0x174/0x1b0 [mlx5_core]
mlx5e_attach_netdev+0x154/0x290 [mlx5_core]
mlx5e_attach+0x88/0xd0 [mlx5_core]
mlx5_attach_device+0x168/0x1e0 [mlx5_core]
mlx5_load_one+0x1140/0x1210 [mlx5_core]
mlx5_pci_resume+0x6c/0xf0 [mlx5_core]
Create cq will fail when trying to use non-existing EQ.
Fixes: 89d44f0a6c73 ("net/mlx5_core: Add pci error handlers to mlx5_core driver")
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
We get the match level (none, l2, l3, l4) while going over the match
dissectors of an offloaded tc rule. When doing this, the match level
enum and the not min inline enum values should be used, fix that.
This worked accidentally b/c both enums have the same numerical values.
Fixes: d708f902989b ('net/mlx5e: Get the required HW match level while parsing TC flow matches')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Currently, we are only supporting tc hw offloads when the eswitch
support is compiled in, but we are not gating the adevertizment
of the NETIF_F_HW_TC feature on this config being set.
Fix it, and while doing that, also avoid dealing with the feature
on ethtool when the config is not set.
Fixes: e8f887ac6a45 ('net/mlx5e: Introduce tc offload support')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
For the "all" ethertype we should not care whether the packet has
vlans. Besides being wrong, the way we did it caused FW error
for rules such as:
tc filter add dev eth0 protocol all parent ffff: \
prio 1 flower skip_sw action drop
b/c the matching meta-data (outer headers bit in struct mlx5_flow_spec)
wasn't set. Fix that by matching on vlan non-existence only if we were
also told to match on the ethertype.
Fixes: cee26487620b ('net/mlx5e: Set vlan masks for all offloaded TC rules')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Slava Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The mlx5e channels should be closed before mlx5i_uninit_underlay_qp
puts the QP into RST (reset) state during mlx5i_close. Currently QP
state incorrectly set to RST before channels got deactivated and closed,
since mlx5_post_send request expects QP in RTS (Ready To Send) state.
The fix is to keep QP in RTS state until mlx5e channels get closed
and to reset QP afterwards.
Also this fix is simply correct in order to keep the open/close flow
symmetric, i.e mlx5i_init_underlay_qp() is called first thing at open,
the correct thing to do is to call mlx5i_uninit_underlay_qp() last thing
at close, which is exactly what this patch is doing.
Fixes: dae37456c8ac ("net/mlx5: Support for attaching multiple underlay QPs to root flow table")
Signed-off-by: Denis Drozdov <denisd@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The commit "net/mlx5: Refactor accel IPSec code" introduced a
bug where asynchronous short time change in hash key value
by create/release SA context might happen during an asynchronous
hash resize operation this could cause a subsequent remove SA
context operation to fail as the key value used during resize is
not the same key value used when remove SA context operation is
invoked.
This commit fixes the bug by defining the SA context hash key
such that it includes only fields that never change during the
lifetime of the SA context object.
Fixes: d6c4f0298cec ("net/mlx5: Refactor accel IPSec code")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When writing packets to a descriptor associated with a combined queue, the
packets should end up on that queue.
Before this change all packets written to any descriptor associated with a
tap interface end up on rx-0, even when the descriptor is associated with a
different queue.
The rx traffic can be generated by either of the following.
1. a simple tap program which spins up multiple queues and writes packets
to each of the file descriptors
2. tx from a qemu vm with a tap multiqueue netdev
The queue for rx traffic can be observed by either of the following (done
on the hypervisor in the qemu case).
1. a simple netmap program which opens and reads from per-queue
descriptors
2. configuring RPS and doing per-cpu captures with rxtxcpu
Alternatively, if you printk() the return value of skb_get_rx_queue() just
before each instance of netif_receive_skb() in tun.c, you will get 65535
for every skb.
Calling skb_record_rx_queue() to set the rx queue to the queue_index fixes
the association between descriptor and rx queue.
Signed-off-by: Matthew Cover <matthew.cover@stackpath.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Up until commit 7e5fbd1e0700 ("net: mdio-gpio: Convert to use gpiod
functions where possible"), the _cansleep variants of the gpio_ API was
used. After that commit and the change to gpiod_ API, the _cansleep()
was dropped. This then results in WARN_ON() when used with GPIO
devices which do sleep. Add back the _cansleep() to avoid this.
Fixes: 7e5fbd1e0700 ("net: mdio-gpio: Convert to use gpiod functions where possible")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit dfa0d55ff6be64e7b6881212a291cb95f8da3b08.
Discussion still ongoing, I shouldn't have applied this.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
