Age | Commit message (Collapse) | Author |
|
In iavf_down, we're skipping the scheduling of certain operations if
the driver is being removed. However, the IAVF_FLAG_AQ_DISABLE_QUEUES
request must not be skipped in this case, because iavf_close waits
for the transition to the __IAVF_DOWN state, which happens in
iavf_virtchnl_completion after the queues are released.
Without this fix, "rmmod iavf" takes half a second per interface that's
up and prints the "Device resources not yet released" warning.
Fixes: c8de44b577eb ("iavf: do not process adminq tasks when __IAVF_IN_REMOVE_TASK is set")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231025183213.874283-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The I40E_TXR_FLAGS_WB_ON_ITR is i40e_ring flag and not i40e_pf one.
Fixes: 8e0764b4d6be42 ("i40e/i40evf: Add support for writeback on ITR feature for X722")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231023212714.178032-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Call skb_gso_validate_network_len() to check if packet is over PMTU.
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Reduce the length of netlink error messages as they are likely to be
truncated anyway. Additionally, reword netlink error messages so they
are more consistent with previous messages.
Fixes: 9dbc8d2b9a02 ("sfc: add decrement ipv6 hop limit by offloading set hop limit actions")
Fixes: 3c9561c0a5b9 ("sfc: support TC decap rules matching on enc_ip_tos")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310202136.4u7bv0hp-lkp@intel.com/
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20231020140149.30490-1-pieter.jansen-van-vuuren@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Even though the functions to read/write registers can fail, most of
the places in the r8152 driver that read/write register values don't
check error codes. The lack of error code checking is problematic in
at least two ways.
The first problem is that the r8152 driver often uses code patterns
similar to this:
x = read_register()
x = x | SOME_BIT;
write_register(x);
...with the above pattern, if the read_register() fails and returns
garbage then we'll end up trying to write modified garbage back to the
Realtek adapter. If the write_register() succeeds that's bad. Note
that as of commit f53a7ad18959 ("r8152: Set memory to all 0xFFs on
failed reg reads") the "garbage" returned by read_register() will at
least be consistent garbage, but it is still garbage.
It turns out that this problem is very serious. Writing garbage to
some of the hardware registers on the Ethernet adapter can put the
adapter in such a bad state that it needs to be power cycled (fully
unplugged and plugged in again) before it can enumerate again.
The second problem is that the r8152 driver generally has functions
that are long sequences of register writes. Assuming everything will
be OK if a random register write fails in the middle isn't a great
assumption.
One might wonder if the above two problems are real. You could ask if
we would really have a successful write after a failed read. It turns
out that the answer appears to be "yes, this can happen". In fact,
we've seen at least two distinct failure modes where this happens.
On a sc7180-trogdor Chromebook if you drop into kdb for a while and
then resume, you can see:
1. We get a "Tx timeout"
2. The "Tx timeout" queues up a USB reset.
3. In rtl8152_pre_reset() we try to reinit the hardware.
4. The first several (2-9) register accesses fail with a timeout, then
things recover.
The above test case was actually fixed by the patch ("r8152: Increase
USB control msg timeout to 5000ms as per spec") but at least shows
that we really can see successful calls after failed ones.
On a different (AMD) based Chromebook with a particular adapter, we
found that during reboot tests we'd also sometimes get a transitory
failure. In this case we saw -EPIPE being returned sometimes. Retrying
worked, but retrying is not always safe for all register accesses
since reading/writing some registers might have side effects (like
registers that clear on read).
Let's fully lock out all register access if a register access fails.
When we do this, we'll try to queue up a USB reset and try to unlock
register access after the reset. This is slightly tricker than it
sounds since the r8152 driver has an optimized reset sequence that
only works reliably after probe happens. In order to handle this, we
avoid the optimized reset if probe didn't finish. Instead, we simply
retry the probe routine in this case.
When locking out access, we'll use the existing infrastructure that
the driver was using when it detected we were unplugged. This keeps us
from getting stuck in delay loops in some parts of the driver.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Whenever the RTL8152_UNPLUG is set that just tells the driver that all
accesses will fail and we should just immediately bail. A future patch
will use this same concept at a time when the driver hasn't actually
been unplugged but is about to be reset. Rename the flag in
preparation for the future patch.
This is a no-op change and just a search and replace.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the adapter is unplugged while we're looping in r8153b_ups_en() /
r8153c_ups_en() we could end up looping for 10 seconds (20 ms * 500
loops). Add code similar to what's done in other places in the driver
to check for unplug and bail.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the adapter is unplugged while we're looping in
rtl_phy_patch_request() we could end up looping for 10 seconds (2 ms *
5000 loops). Add code similar to what's done in other places in the
driver to check for unplug and bail.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The error handling in rtl8152_probe() is missing a call to release
firmware. Add it in to match what's in the cleanup code in
rtl8152_disconnect().
Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The error handling in rtl8152_probe() is missing a call to cancel the
hw_phy_work. Add it in to match what's in the cleanup code in
rtl8152_disconnect().
Fixes: a028a9e003f2 ("r8152: move the settings of PHY to a work queue")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The rtl8152_probe() function lacks a call to the chip-specific
unload() routine when it sees an error in probe. Add it in to match
the cleanup code in rtl8152_disconnect().
Fixes: ac718b69301c ("net/usb: new driver for RTL8152")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to the comment next to USB_CTRL_GET_TIMEOUT and
USB_CTRL_SET_TIMEOUT, although sending/receiving control messages is
usually quite fast, the spec allows them to take up to 5 seconds.
Let's increase the timeout in the Realtek driver from 500ms to 5000ms
(using the #defines) to account for this.
This is not just a theoretical change. The need for the longer timeout
was seen in testing. Specifically, if you drop a sc7180-trogdor based
Chromebook into the kdb debugger and then "go" again after sitting in
the debugger for a while, the next USB control message takes a long
time. Out of ~40 tests the slowest USB control message was 4.5
seconds.
While dropping into kdb is not exactly an end-user scenario, the above
is similar to what could happen due to an temporary interrupt storm,
what could happen if there was a host controller (HW or SW) issue, or
what could happen if the Realtek device got into a confused state and
needed time to recover.
This change is fairly critical since the r8152 driver in Linux doesn't
expect register reads/writes (which are backed by USB control
messages) to fail.
Fixes: ac718b69301c ("net/usb: new driver for RTL8152")
Suggested-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported the following uninit-value access issue [1]:
smsc95xx 1-1:0.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x00000030: -32
smsc95xx 1-1:0.0 (unnamed net_device) (uninitialized): Error reading E2P_CMD
=====================================================
BUG: KMSAN: uninit-value in smsc95xx_reset+0x409/0x25f0 drivers/net/usb/smsc95xx.c:896
smsc95xx_reset+0x409/0x25f0 drivers/net/usb/smsc95xx.c:896
smsc95xx_bind+0x9bc/0x22e0 drivers/net/usb/smsc95xx.c:1131
usbnet_probe+0x100b/0x4060 drivers/net/usb/usbnet.c:1750
usb_probe_interface+0xc75/0x1210 drivers/usb/core/driver.c:396
really_probe+0x506/0xf40 drivers/base/dd.c:658
__driver_probe_device+0x2a7/0x5d0 drivers/base/dd.c:800
driver_probe_device+0x72/0x7b0 drivers/base/dd.c:830
__device_attach_driver+0x55a/0x8f0 drivers/base/dd.c:958
bus_for_each_drv+0x3ff/0x620 drivers/base/bus.c:457
__device_attach+0x3bd/0x640 drivers/base/dd.c:1030
device_initial_probe+0x32/0x40 drivers/base/dd.c:1079
bus_probe_device+0x3d8/0x5a0 drivers/base/bus.c:532
device_add+0x16ae/0x1f20 drivers/base/core.c:3622
usb_set_configuration+0x31c9/0x38c0 drivers/usb/core/message.c:2207
usb_generic_driver_probe+0x109/0x2a0 drivers/usb/core/generic.c:238
usb_probe_device+0x290/0x4a0 drivers/usb/core/driver.c:293
really_probe+0x506/0xf40 drivers/base/dd.c:658
__driver_probe_device+0x2a7/0x5d0 drivers/base/dd.c:800
driver_probe_device+0x72/0x7b0 drivers/base/dd.c:830
__device_attach_driver+0x55a/0x8f0 drivers/base/dd.c:958
bus_for_each_drv+0x3ff/0x620 drivers/base/bus.c:457
__device_attach+0x3bd/0x640 drivers/base/dd.c:1030
device_initial_probe+0x32/0x40 drivers/base/dd.c:1079
bus_probe_device+0x3d8/0x5a0 drivers/base/bus.c:532
device_add+0x16ae/0x1f20 drivers/base/core.c:3622
usb_new_device+0x15f6/0x22f0 drivers/usb/core/hub.c:2589
hub_port_connect drivers/usb/core/hub.c:5440 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5580 [inline]
port_event drivers/usb/core/hub.c:5740 [inline]
hub_event+0x53bc/0x7290 drivers/usb/core/hub.c:5822
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x104e/0x1e70 kernel/workqueue.c:2703
worker_thread+0xf45/0x1490 kernel/workqueue.c:2784
kthread+0x3e8/0x540 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
Local variable buf.i225 created at:
smsc95xx_read_reg drivers/net/usb/smsc95xx.c:90 [inline]
smsc95xx_reset+0x203/0x25f0 drivers/net/usb/smsc95xx.c:892
smsc95xx_bind+0x9bc/0x22e0 drivers/net/usb/smsc95xx.c:1131
CPU: 1 PID: 773 Comm: kworker/1:2 Not tainted 6.6.0-rc1-syzkaller-00125-ge42bebf6db29 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
Workqueue: usb_hub_wq hub_event
=====================================================
Similar to e9c65989920f ("net: usb: smsc75xx: Fix uninit-value access in
__smsc75xx_read_reg"), this issue is caused because usbnet_read_cmd() reads
less bytes than requested (zero byte in the reproducer). In this case,
'buf' is not properly filled.
This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads
less bytes than requested.
sysbot reported similar uninit-value access issue [2]. The root cause is
the same as mentioned above, and this patch addresses it as well.
Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Reported-and-tested-by: syzbot+c74c24b43c9ae534f0e0@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+2c97a98a5ba9ea9c23bd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c74c24b43c9ae534f0e0 [1]
Closes: https://syzkaller.appspot.com/bug?extid=2c97a98a5ba9ea9c23bd [2]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
t4_set_params_timeout() can return -EINVAL if failed, add check
for this.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
adf7242_stats_show()
strncat() usage in adf7242_debugfs_init() is wrong.
The size given to strncat() is the maximum number of bytes that can be
written, excluding the trailing NULL.
Here, the size that is passed, DNAME_INLINE_LEN, does not take into account
the size of "adf7242-" that is already in the array.
In order to fix it, use snprintf() instead.
Fixes: 7302b9d90117 ("ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The spi_transfer struct has to have all it's fields initialized to 0 in
this case, since not all of them are set before starting the transfer.
Otherwise, spi_sync_transfer() will sometimes return an error.
Fixes: a526a3cc9c8d ("net: ethernet: adi: adin1110: Fix SPI transfers")
Signed-off-by: Dell Jin <dell.jin.code@outlook.com>
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Upon boot up, the driver will configure the MAC capabilities based on
the maximum number of tx and rx queues. When the user changes the
tx queues to single queue, the MAC should be capable of supporting Half
Duplex, but the driver does not update the MAC capabilities when it is
configured so.
Using the stmmac_reinit_queues() to check the number of tx queues
and set the MAC capabilities accordingly.
Fixes: 0366f7e06a6b ("net: stmmac: add ethtool support for get/set channels")
Cc: <stable@vger.kernel.org> # 5.17+
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Gan, Yi Fang <yi.fang.gan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit b0377116decd ("net: ethernet: Use device_get_match_data()") dropped
the unconditional use of xgene_enet_of_match resulting in this warning:
drivers/net/ethernet/apm/xgene/xgene_enet_main.c:2004:34: warning: unused variable 'xgene_enet_of_match' [-Wunused-const-variable]
The fix is to drop of_match_ptr() which is not necessary because DT is
always used for this driver (well, it could in theory support ACPI only,
but CONFIG_OF is always enabled for arm64).
Fixes: b0377116decd ("net: ethernet: Use device_get_match_data()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310170627.2Kvf6ZHY-lkp@intel.com/
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a programming status desc is encountered on the rx_ring,
next_to_process is bumped along with cleaned_count but next_to_clean is
not. This causes I40E_DESC_UNUSED() macro to misbehave resulting in
overwriting whole ring with new buffers.
Update next_to_clean to point to next_to_process on seeing a programming
status desc if not in the middle of handling a multi-frag packet. Also,
bump cleaned_count only for such case as otherwise next_to_clean buffer
may be returned to hardware on reaching clean_threshold.
Fixes: e9031f2da1ae ("i40e: introduce next_to_process to i40e_ring")
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reported-by: hq.dev+kernel@msdfc.xyz
Reported by: Solomon Peachy <pizza@shaftnet.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217678
Tested-by: hq.dev+kernel@msdfc.xyz
Tested by: Indrek Järve <incx@dustbite.net>
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20231019203852.3663665-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'ethtool_convert_link_mode_to_legacy_u32' method does not allow us to
advertise 2500M speed support and TP (twisted pair) properly. Convert to
'ethtool_link_ksettings_test_link_mode' to advertise supported speed and
eliminate ambiguity.
Fixes: 8c5ad0dae93c ("igc: Add ethtool support")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231019203641.3661960-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add check for return of igb_update_ethtool_nfc_entry so that in case
of any potential errors the memory alocated for input will be freed.
Fixes: 0e71def25281 ("igb: add support of RX network flow classification")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
reques -> request
Fixes: 09dde54c6a69 ("PS3: gelic: Add wireless support for PS3")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit c87c938f62d8f1 ("i40e: Add VF VLAN pruning") added new
PF flag I40E_FLAG_VF_VLAN_PRUNING but its value collides with
existing I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED flag.
Move the affected flag at the end of the flags and fix its value.
Reproducer:
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close on
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 vf-vlan-pruning on
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close off
[ 6323.142585] i40e 0000:02:00.0: Setting link-down-on-close not supported on this port (because total-port-shutdown is enabled)
netlink error: Operation not supported
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 vf-vlan-pruning off
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close off
The link-down-on-close flag cannot be modified after setting vf-vlan-pruning
because vf-vlan-pruning shares the same bit with total-port-shutdown flag
that prevents any modification of link-down-on-close flag.
Fixes: c87c938f62d8 ("i40e: Add VF VLAN pruning")
Cc: Mateusz Palczewski <mateusz.palczewski@intel.com>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is not safe to initialize the waitqueues after queueing the
watchdog_task. It will be using them.
The chance of this causing a real problem is very small, because
there will be some sleeping before any of the waitqueues get used.
I got a crash only after inserting an artificial sleep in iavf_probe.
Queue the watchdog_task as the last step in iavf_probe. Add a comment to
prevent repeating the mistake.
Fixes: fe2647ab0c99 ("i40evf: prevent VF close returning before state transitions to DOWN")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KCSAN reported the following data-race bug:
==================================================================
BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169
race at unknown origin, with read to 0xffff888117e43510 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14))
asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)
value changed: 0x80003fff -> 0x3402805f
Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================
drivers/net/ethernet/realtek/r8169_main.c:
==========================================
4429
→ 4430 status = le32_to_cpu(desc->opts1);
4431 if (status & DescOwn)
4432 break;
4433
4434 /* This barrier is needed to keep us from reading
4435 * any other fields out of the Rx descriptor until
4436 * we know the status of DescOwn
4437 */
4438 dma_rmb();
4439
4440 if (unlikely(status & RxRES)) {
4441 if (net_ratelimit())
4442 netdev_warn(dev, "Rx ERROR. status = %08x\n",
Marco Elver explained that dma_rmb() doesn't prevent the compiler to tear up the access to
desc->opts1 which can be written to concurrently. READ_ONCE() should prevent that from
happening:
4429
→ 4430 status = le32_to_cpu(READ_ONCE(desc->opts1));
4431 if (status & DescOwn)
4432 break;
4433
As the consequence of this fix, this KCSAN warning was eliminated.
Fixes: 6202806e7c03a ("r8169: drop member opts1_mask from struct rtl8169_private")
Suggested-by: Marco Elver <elver@google.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TxDescArray[entry].opts1
KCSAN reported the following data-race:
==================================================================
BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169
race at unknown origin, with read to 0xffff888140d37570 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14))
asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)
value changed: 0xb0000042 -> 0x00000000
Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================
The read side is in
drivers/net/ethernet/realtek/r8169_main.c
=========================================
4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp,
4356 int budget)
4357 {
4358 unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0;
4359 struct sk_buff *skb;
4360
4361 dirty_tx = tp->dirty_tx;
4362
4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) {
4364 unsigned int entry = dirty_tx % NUM_TX_DESC;
4365 u32 status;
4366
→ 4367 status = le32_to_cpu(tp->TxDescArray[entry].opts1);
4368 if (status & DescOwn)
4369 break;
4370
4371 skb = tp->tx_skb[entry].skb;
4372 rtl8169_unmap_tx_skb(tp, entry);
4373
4374 if (skb) {
4375 pkts_compl++;
4376 bytes_compl += skb->len;
4377 napi_consume_skb(skb, budget);
4378 }
4379 dirty_tx++;
4380 }
4381
4382 if (tp->dirty_tx != dirty_tx) {
4383 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl);
4384 WRITE_ONCE(tp->dirty_tx, dirty_tx);
4385
4386 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl,
4387 rtl_tx_slots_avail(tp),
4388 R8169_TX_START_THRS);
4389 /*
4390 * 8168 hack: TxPoll requests are lost when the Tx packets are
4391 * too close. Let's kick an extra TxPoll request when a burst
4392 * of start_xmit activity is detected (if it is not detected,
4393 * it is slow enough). -- FR
4394 * If skb is NULL then we come here again once a tx irq is
4395 * triggered after the last fragment is marked transmitted.
4396 */
4397 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb)
4398 rtl8169_doorbell(tp);
4399 }
4400 }
tp->TxDescArray[entry].opts1 is reported to have a data-race and READ_ONCE() fixes
this KCSAN warning.
4366
→ 4367 status = le32_to_cpu(READ_ONCE(tp->TxDescArray[entry].opts1));
4368 if (status & DescOwn)
4369 break;
4370
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KCSAN reported the following data-race:
==================================================================
BUG: KCSAN: data-race in rtl8169_poll [r8169] / rtl8169_start_xmit [r8169]
write (marked) to 0xffff888102474b74 of 4 bytes by task 5358 on cpu 29:
rtl8169_start_xmit (drivers/net/ethernet/realtek/r8169_main.c:4254) r8169
dev_hard_start_xmit (./include/linux/netdevice.h:4889 ./include/linux/netdevice.h:4903 net/core/dev.c:3544 net/core/dev.c:3560)
sch_direct_xmit (net/sched/sch_generic.c:342)
__dev_queue_xmit (net/core/dev.c:3817 net/core/dev.c:4306)
ip_finish_output2 (./include/linux/netdevice.h:3082 ./include/net/neighbour.h:526 ./include/net/neighbour.h:540 net/ipv4/ip_output.c:233)
__ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:293)
ip_finish_output (net/ipv4/ip_output.c:328)
ip_output (net/ipv4/ip_output.c:435)
ip_send_skb (./include/net/dst.h:458 net/ipv4/ip_output.c:127 net/ipv4/ip_output.c:1486)
udp_send_skb (net/ipv4/udp.c:963)
udp_sendmsg (net/ipv4/udp.c:1246)
inet_sendmsg (net/ipv4/af_inet.c:840 (discriminator 4))
sock_sendmsg (net/socket.c:730 net/socket.c:753)
__sys_sendto (net/socket.c:2177)
__x64_sys_sendto (net/socket.c:2185)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
read to 0xffff888102474b74 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4397 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14))
asm_common_interrupt (./arch/x86/include/asm/idtentry.h:636)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)
value changed: 0x002f4815 -> 0x002f4816
Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================
The write side of drivers/net/ethernet/realtek/r8169_main.c is:
==================
4251 /* rtl_tx needs to see descriptor changes before updated tp->cur_tx */
4252 smp_wmb();
4253
→ 4254 WRITE_ONCE(tp->cur_tx, tp->cur_tx + frags + 1);
4255
4256 stop_queue = !netif_subqueue_maybe_stop(dev, 0, rtl_tx_slots_avail(tp),
4257 R8169_TX_STOP_THRS,
4258 R8169_TX_START_THRS);
The read side is the function rtl_tx():
4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp,
4356 int budget)
4357 {
4358 unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0;
4359 struct sk_buff *skb;
4360
4361 dirty_tx = tp->dirty_tx;
4362
4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) {
4364 unsigned int entry = dirty_tx % NUM_TX_DESC;
4365 u32 status;
4366
4367 status = le32_to_cpu(tp->TxDescArray[entry].opts1);
4368 if (status & DescOwn)
4369 break;
4370
4371 skb = tp->tx_skb[entry].skb;
4372 rtl8169_unmap_tx_skb(tp, entry);
4373
4374 if (skb) {
4375 pkts_compl++;
4376 bytes_compl += skb->len;
4377 napi_consume_skb(skb, budget);
4378 }
4379 dirty_tx++;
4380 }
4381
4382 if (tp->dirty_tx != dirty_tx) {
4383 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl);
4384 WRITE_ONCE(tp->dirty_tx, dirty_tx);
4385
4386 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl,
4387 rtl_tx_slots_avail(tp),
4388 R8169_TX_START_THRS);
4389 /*
4390 * 8168 hack: TxPoll requests are lost when the Tx packets are
4391 * too close. Let's kick an extra TxPoll request when a burst
4392 * of start_xmit activity is detected (if it is not detected,
4393 * it is slow enough). -- FR
4394 * If skb is NULL then we come here again once a tx irq is
4395 * triggered after the last fragment is marked transmitted.
4396 */
→ 4397 if (tp->cur_tx != dirty_tx && skb)
4398 rtl8169_doorbell(tp);
4399 }
4400 }
Obviously from the code, an earlier detected data-race for tp->cur_tx was fixed in the
line 4363:
4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) {
but the same solution is required for protecting the other access to tp->cur_tx:
→ 4397 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb)
4398 rtl8169_doorbell(tp);
The write in the line 4254 is protected with WRITE_ONCE(), but the read in the line 4397
might have suffered read tearing under some compiler optimisations.
The fix eliminated the KCSAN data-race report for this bug.
It is yet to be evaluated what happens if tp->cur_tx changes between the test in line 4363
and line 4397. This test should certainly not be cached by the compiler in some register
for such a long time, while asynchronous writes to tp->cur_tx might have occurred in line
4254 in the meantime.
Fixes: 94d8a98e6235c ("r8169: reduce number of workaround doorbell rings")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cited commit introduced a neat way of updating next_to_clean that does
not require boundary checks on each increment. This was done by masking
the new value with (ring length - 1) mask. Problem is that this is
applicable only for power of 2 ring sizes, for every other size this
assumption can not be made. In turn, it leads to cleaning descriptors
out of order as well as splats:
[ 1388.411915] Workqueue: events xp_release_deferred
[ 1388.411919] RIP: 0010:xp_free+0x1a/0x50
[ 1388.411921] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 55 48 8b 57 70 48 8d 47 70 48 89 e5 48 39 d0 74 06 <5d> c3 cc cc cc cc 48 8b 57 60 83 82 b8 00 00 00 01 48 8b 57 60 48
[ 1388.411922] RSP: 0018:ffa0000000a83cb0 EFLAGS: 00000206
[ 1388.411923] RAX: ff11000119aa5030 RBX: 000000000000001d RCX: ff110001129b6e50
[ 1388.411924] RDX: ff11000119aa4fa0 RSI: 0000000055555554 RDI: ff11000119aa4fc0
[ 1388.411925] RBP: ffa0000000a83cb0 R08: 0000000000000000 R09: 0000000000000000
[ 1388.411926] R10: 0000000000000001 R11: 0000000000000000 R12: ff11000115829b80
[ 1388.411927] R13: 000000000000005f R14: 0000000000000000 R15: ff11000119aa4fc0
[ 1388.411928] FS: 0000000000000000(0000) GS:ff11000277e00000(0000) knlGS:0000000000000000
[ 1388.411929] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1388.411930] CR2: 00007f1f564e6c14 CR3: 000000000783c005 CR4: 0000000000771ef0
[ 1388.411931] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1388.411931] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1388.411932] PKRU: 55555554
[ 1388.411933] Call Trace:
[ 1388.411934] <IRQ>
[ 1388.411935] ? show_regs+0x6e/0x80
[ 1388.411937] ? watchdog_timer_fn+0x1d2/0x240
[ 1388.411939] ? __pfx_watchdog_timer_fn+0x10/0x10
[ 1388.411941] ? __hrtimer_run_queues+0x10e/0x290
[ 1388.411945] ? clockevents_program_event+0xae/0x130
[ 1388.411947] ? hrtimer_interrupt+0x105/0x240
[ 1388.411949] ? __sysvec_apic_timer_interrupt+0x54/0x150
[ 1388.411952] ? sysvec_apic_timer_interrupt+0x7f/0x90
[ 1388.411955] </IRQ>
[ 1388.411955] <TASK>
[ 1388.411956] ? asm_sysvec_apic_timer_interrupt+0x1f/0x30
[ 1388.411958] ? xp_free+0x1a/0x50
[ 1388.411960] i40e_xsk_clean_rx_ring+0x5d/0x100 [i40e]
[ 1388.411968] i40e_clean_rx_ring+0x14c/0x170 [i40e]
[ 1388.411977] i40e_queue_pair_disable+0xda/0x260 [i40e]
[ 1388.411986] i40e_xsk_pool_setup+0x192/0x1d0 [i40e]
[ 1388.411993] i40e_reconfig_rss_queues+0x1f0/0x1450 [i40e]
[ 1388.412002] xp_disable_drv_zc+0x73/0xf0
[ 1388.412004] ? mutex_lock+0x17/0x50
[ 1388.412007] xp_release_deferred+0x2b/0xc0
[ 1388.412010] process_one_work+0x178/0x350
[ 1388.412011] ? __pfx_worker_thread+0x10/0x10
[ 1388.412012] worker_thread+0x2f7/0x420
[ 1388.412014] ? __pfx_worker_thread+0x10/0x10
[ 1388.412015] kthread+0xf8/0x130
[ 1388.412017] ? __pfx_kthread+0x10/0x10
[ 1388.412019] ret_from_fork+0x3d/0x60
[ 1388.412021] ? __pfx_kthread+0x10/0x10
[ 1388.412023] ret_from_fork_asm+0x1b/0x30
[ 1388.412026] </TASK>
It comes from picking wrong ring entries when cleaning xsk buffers
during pool detach.
Remove the count_mask logic and use they boundary check when updating
next_to_process (which used to be a next_to_clean).
Fixes: c8a8ca3408dc ("i40e: remove unnecessary memory writes of the next to clean pointer")
Reported-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Tested-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231018163908.40841-1-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter, WiFi.
Feels like an up-tick in regression fixes, mostly for older releases.
The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as
fairly clear-cut user reported regressions. The mlx5 DMA bug was
causing strife for 390x folks. The fixes themselves are not
particularly scary, tho. No open investigations / outstanding reports
at the time of writing.
Current release - regressions:
- eth: mlx5: perform DMA operations in the right locations, make
devices usable on s390x, again
- sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner
curve, previous fix of rejecting invalid config broke some scripts
- rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock
- revert "ethtool: Fix mod state of verbose no_mask bitset", needs
more work
Current release - new code bugs:
- tcp: fix listen() warning with v4-mapped-v6 address
Previous releases - regressions:
- tcp: allow tcp_disconnect() again when threads are waiting, it was
denied to plug a constant source of bugs but turns out .NET depends
on it
- eth: mlx5: fix double-free if buffer refill fails under OOM
- revert "net: wwan: iosm: enable runtime pm support for 7560", it's
causing regressions and the WWAN team at Intel disappeared
- tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a
single skb, fix single-stream perf regression on some devices
Previous releases - always broken:
- Bluetooth:
- fix issues in legacy BR/EDR PIN code pairing
- correctly bounds check and pad HCI_MON_NEW_INDEX name
- netfilter:
- more fixes / follow ups for the large "commit protocol" rework,
which went in as a fix to 6.5
- fix null-derefs on netlink attrs which user may not pass in
- tcp: fix excessive TLP and RACK timeouts from HZ rounding (bless
Debian for keeping HZ=250 alive)
- net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
letting frankenstein UDP super-frames from getting into the stack
- net: fix interface altnames when ifc moves to a new namespace
- eth: qed: fix the size of the RX buffers
- mptcp: avoid sending RST when closing the initial subflow"
* tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
Revert "ethtool: Fix mod state of verbose no_mask bitset"
selftests: mptcp: join: no RST when rm subflow/addr
mptcp: avoid sending RST when closing the initial subflow
mptcp: more conservative check for zero probes
tcp: check mptcp-level constraints for backlog coalescing
selftests: mptcp: join: correctly check for no RST
net: ti: icssg-prueth: Fix r30 CMDs bitmasks
selftests: net: add very basic test for netdev names and namespaces
net: move altnames together with the netdevice
net: avoid UAF on deleted altname
net: check for altname conflicts when changing netdev's netns
net: fix ifname in netlink ntf during netns move
net: ethernet: ti: Fix mixed module-builtin object
net: phy: bcm7xxx: Add missing 16nm EPHY statistics
ipv4: fib: annotate races around nh->nh_saddr_genid and nh->nh_saddr
tcp_bpf: properly release resources on error paths
net/sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve
net: mdio-mux: fix C45 access returning -EIO after API change
tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb
octeon_ep: update BQL sent bytes before ringing doorbell
...
|
|
The bitmasks for EMAC_PORT_DISABLE and EMAC_PORT_FORWARD r30 commands are
wrong in the driver.
Update the bitmasks of these commands to the correct ones as used by the
ICSSG firmware. These bitmasks are backwards compatible and work with
any ICSSG firmware version.
Fixes: e9b4ece7d74b ("net: ti: icssg-prueth: Add Firmware config and classification APIs.")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231018150715.3085380-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With CONFIG_TI_K3_AM65_CPSW_NUSS=y and CONFIG_TI_ICSSG_PRUETH=m,
k3-cppi-desc-pool.o is linked to a module and also to vmlinux even though
the expected CFLAGS are different between builtins and modules.
The build system is complaining about the following:
k3-cppi-desc-pool.o is added to multiple modules: icssg-prueth
ti-am65-cpsw-nuss
Introduce the new module, k3-cppi-desc-pool, to provide the common
functions to ti-am65-cpsw-nuss and icssg-prueth.
Fixes: 128d5874c082 ("net: ti: icssg-prueth: Add ICSSG ethernet driver")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20231018064936.3146846-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The .probe() function would allocate the necessary space and ensure that
the library call sizes the number of statistics but the callbacks
necessary to fetch the name and values were not wired up.
Reported-by: Justin Chen <justin.chen@broadcom.com>
Fixes: f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231017205119.416392-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mii_bus API conversion to read_c45() and write_c45() did not cover
the mdio-mux driver before read() and write() were made C22-only.
This broke arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso.
The -EOPNOTSUPP from mdiobus_c45_read() is transformed by
get_phy_c45_devs_in_pkg() into -EIO, is further propagated to
of_mdiobus_register() and this makes the mdio-mux driver fail to probe
the entire child buses, not just the PHYs that cause access errors.
Fix the regression by introducing special c45 read and write accessors
to mdio-mux which forward the operation to the parent MDIO bus.
Fixes: db1a63aed89c ("net: phy: Remove fallback to old C45 method")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231017143144.3212657-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sometimes Tx is completed immediately after doorbell is updated, which
causes Tx completion routing to update completion bytes before the
same packet bytes are updated in sent bytes in transmit function, hence
hitting BUG_ON() in dql_completed(). To avoid this, update BQL
sent bytes before ringing doorbell.
Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://lore.kernel.org/r/20231017105030.2310966-1-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Runtime power management support breaks Intel LTE modem where dmesg dump
showes timeout errors:
```
[ 72.027442] iosm 0000:01:00.0: msg timeout
[ 72.531638] iosm 0000:01:00.0: msg timeout
[ 73.035414] iosm 0000:01:00.0: msg timeout
[ 73.540359] iosm 0000:01:00.0: msg timeout
```
Furthermore, when shutting down with `poweroff` and modem attached, the
system rebooted instead of powering down as expected. The modem works
again only after power cycling.
Revert runtime power management support for IOSM driver as introduced by
commit e4f5073d53be6c ("net: wwan: iosm: enable runtime pm support for
7560").
Fixes: e4f5073d53be ("net: wwan: iosm: enable runtime pm support for 7560")
Reported-by: Martin <mwolf@adiumentum.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217996
Link: https://lore.kernel.org/r/267abf02-4b60-4a2e-92cd-709e3da6f7d3@gmail.com/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Return a negative error code instead of success.
Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/147927f0-9ada-45cc-81ff-75a19dd30b76@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 956db0a13b47 ("net: warn about attempts to register
negative ifindex") syzbot is able to trigger the following splat.
Negative ifindex are not supported.
WARNING: CPU: 1 PID: 6003 at net/core/dev.c:9596 dev_index_reserve+0x104/0x210
Modules linked in:
CPU: 1 PID: 6003 Comm: syz-executor926 Not tainted 6.6.0-rc4-syzkaller-g19af4a4ed414 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : dev_index_reserve+0x104/0x210
lr : dev_index_reserve+0x100/0x210
sp : ffff800096a878e0
x29: ffff800096a87930 x28: ffff0000d04380d0 x27: ffff0000d04380f8
x26: ffff0000d04380f0 x25: 1ffff00012d50f20 x24: 1ffff00012d50f1c
x23: dfff800000000000 x22: ffff8000929c21c0 x21: 00000000ffffffea
x20: ffff0000d04380e0 x19: ffff800096a87900 x18: ffff800096a874c0
x17: ffff800084df5008 x16: ffff80008051f9c4 x15: 0000000000000001
x14: 1fffe0001a087198 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff0000d41c9bc0 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffff800091763d88 x4 : 0000000000000000 x3 : ffff800084e04748
x2 : 0000000000000001 x1 : 00000000fead71c7 x0 : 0000000000000000
Call trace:
dev_index_reserve+0x104/0x210
register_netdevice+0x598/0x1074 net/core/dev.c:10084
tun_set_iff+0x630/0xb0c drivers/net/tun.c:2850
__tun_chr_ioctl+0x788/0x2af8 drivers/net/tun.c:3118
tun_chr_ioctl+0x38/0x4c drivers/net/tun.c:3403
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl fs/ioctl.c:857 [inline]
__arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:857
__invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155
el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:595
irq event stamp: 11348
hardirqs last enabled at (11347): [<ffff80008a716574>] __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:151 [inline]
hardirqs last enabled at (11347): [<ffff80008a716574>] _raw_spin_unlock_irqrestore+0x38/0x98 kernel/locking/spinlock.c:194
hardirqs last disabled at (11348): [<ffff80008a627820>] el1_dbg+0x24/0x80 arch/arm64/kernel/entry-common.c:436
softirqs last enabled at (11138): [<ffff8000887ca53c>] spin_unlock_bh include/linux/spinlock.h:396 [inline]
softirqs last enabled at (11138): [<ffff8000887ca53c>] release_sock+0x15c/0x1b0 net/core/sock.c:3531
softirqs last disabled at (11136): [<ffff8000887ca41c>] spin_lock_bh include/linux/spinlock.h:356 [inline]
softirqs last disabled at (11136): [<ffff8000887ca41c>] release_sock+0x3c/0x1b0 net/core/sock.c:3518
Fixes: fb7589a16216 ("tun: Add ability to create tun device with given index")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20231016180851.3560092-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The prefill function should have only removed the page count bias it
added. Fully freeing the page will cause gve_free_queue_page_list to
free a page the driver no longer owns.
Fixes: 82fd151d38d9 ("gve: Reduce alloc and copy costs in the GQ rx path")
Signed-off-by: Shailend Chand <shailend@google.com>
Link: https://lore.kernel.org/r/20231014014121.2843922-1-shailend@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 295525e29a5b ("virtio_net: merge dma operations when filling
mergeable buffers") unmaps the buffer with DMA_ATTR_SKIP_CPU_SYNC when
the dma->ref is zero. We do that with DMA_ATTR_SKIP_CPU_SYNC, because we
do not want to do the sync for the entire page_frag. But that misses the
sync for the current area.
This patch does cpu sync regardless of whether the ref is zero or not.
Fixes: 295525e29a5b ("virtio_net: merge dma operations when filling mergeable buffers")
Reported-by: Michael Roth <michael.roth@amd.com>
Closes: http://lore.kernel.org/all/20230926130451.axgodaa6tvwqs3ut@amd.com
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Driver allocates the LL2 rx buffers from kmalloc()
area to construct the skb using slab_build_skb()
The required size allocation seems to have overlooked
for accounting both skb_shared_info size and device
placement padding bytes which results into the below
panic when doing skb_put() for a standard MTU sized frame.
skbuff: skb_over_panic: text:ffffffffc0b0225f len:1514 put:1514
head:ff3dabceaf39c000 data:ff3dabceaf39c042 tail:0x62c end:0x566
dev:<NULL>
…
skb_panic+0x48/0x4a
skb_put.cold+0x10/0x10
qed_ll2b_complete_rx_packet+0x14f/0x260 [qed]
qed_ll2_rxq_handle_completion.constprop.0+0x169/0x200 [qed]
qed_ll2_rxq_completion+0xba/0x320 [qed]
qed_int_sp_dpc+0x1a7/0x1e0 [qed]
This patch fixes this by accouting skb_shared_info and device
placement padding size bytes when allocating the buffers.
Cc: David S. Miller <davem@davemloft.net>
Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-10-12
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix VF representors reporting zero counters to "ip -s" command
net/mlx5e: Don't offload internal port if filter device is out device
net/mlx5e: Take RTNL lock before triggering netdev notifiers
net/mlx5e: XDP, Fix XDP_REDIRECT mpwqe page fragment leaks on shutdown
net/mlx5e: RX, Fix page_pool allocation failure recovery for legacy rq
net/mlx5e: RX, Fix page_pool allocation failure recovery for striding rq
net/mlx5: Handle fw tracer change ownership event based on MTRC
net/mlx5: Bridge, fix peer entry ageing in LAG mode
net/mlx5: E-switch, register event handler before arming the event
net/mlx5: Perform DMA operations in the right locations
====================
Link: https://lore.kernel.org/r/20231012195127.129585-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
One thing is broken in the safe mode, that is
ice_deinit_features() is being executed even
that ice_init_features() was not causing stack
trace during pci_unregister_driver().
Add check on the top of the function.
Fixes: 5b246e533d01 ("ice: split probe into smaller functions")
Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/20231011233334.336092-4-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the system boots into the crash dump kernel after a panic, the ice
networking device may still have pending transactions that can cause errors
or machine checks when the device is re-enabled. This can prevent the crash
dump kernel from loading the driver or collecting the crash data.
To avoid this issue, perform a function level reset (FLR) on the ice device
via PCIe config space before enabling it on the crash kernel. This will
clear any outstanding transactions and stop all queues and interrupts.
Restore the config space after the FLR, otherwise it was found in testing
that the driver wouldn't load successfully.
The following sequence causes the original issue:
- Load the ice driver with modprobe ice
- Enable SR-IOV with 2 VFs: echo 2 > /sys/class/net/eth0/device/sriov_num_vfs
- Trigger a crash with echo c > /proc/sysrq-trigger
- Load the ice driver again (or let it load automatically) with modprobe ice
- The system crashes again during pcim_enable_device()
Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series")
Reported-by: Vishal Agrawal <vagrawal@redhat.com>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/20231011233334.336092-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The hardware provides the indexes of the first and the last available
queue and VF. From the indexes, the driver calculates the numbers of
queues and VFs. In theory, a faulty device might say the last index is
smaller than the first index. In that case, the driver's calculation
would underflow, it would attempt to write to non-existent registers
outside of the ioremapped range and crash.
I ran into this not by having a faulty device, but by an operator error.
I accidentally ran a QE test meant for i40e devices on an ice device.
The test used 'echo i40e > /sys/...ice PCI device.../driver_override',
bound the driver to the device and crashed in one of the wr32 calls in
i40e_clear_hw.
Add checks to prevent underflows in the calculations of num_queues and
num_vfs. With this fix, the wrong device probing reports errors and
returns a failure without crashing.
Fixes: 838d41d92a90 ("i40e: clear all queues and interrupts")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/20231011233334.336092-2-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ICSSG HW stats on TX side considers 8 preamble bytes as data bytes. Due
to this the tx_bytes of ICSSG interface doesn't match the rx_bytes of the
link partner. There is no public errata available yet.
As a workaround to fix this, decrease tx_bytes by 8 bytes for every tx
frame.
Fixes: c1e10d5dc7a1 ("net: ti: icssg-prueth: Add ICSSG Stats")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20231012064626.977466-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As reported by Tom, .NET and applications build on top of it rely
on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP
socket.
The blamed commit below caused a regression, as such cancellation
can now fail.
As suggested by Eric, this change addresses the problem explicitly
causing blocking I/O operation to terminate immediately (with an error)
when a concurrent disconnect() is executed.
Instead of tracking the number of threads blocked on a given socket,
track the number of disconnect() issued on such socket. If such counter
changes after a blocking operation releasing and re-acquiring the socket
lock, error out the current operation.
Fixes: 4faeee0cf8a5 ("tcp: deny tcp_disconnect() when threads are waiting")
Reported-by: Tom Deseyn <tdeseyn@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886305
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/f3b95e47e3dbed840960548aebaa8d954372db41.1697008693.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the introduction of the ice driver the code has been
double-shifting the RSS enabling field, because the define already has
shifts in it and can't have the regular pattern of "a << shiftval &
mask" applied.
Most places in the code got it right, but one line was still wrong. Fix
this one location for easy backports to stable. An in-progress patch
fixes the defines to "standard" and will be applied as part of the
regular -next process sometime after this one.
Fixes: d76a60ba7afb ("ice: Add support for VLANs and offloads")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
CC: stable@vger.kernel.org
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231010203101.406248-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In bcm_sf2_mdio_register(), the class_find_device() will call get_device()
to increment reference count for priv->master_mii_bus->dev if
of_mdio_find_bus() succeeds. If mdiobus_alloc() or mdiobus_register()
fails, it will call get_device() twice without decrement reference count
for the device. And it is the same if bcm_sf2_mdio_register() succeeds but
fails in bcm_sf2_sw_probe(), or if bcm_sf2_sw_probe() succeeds. If the
reference count has not decremented to zero, the dev related resource will
not be freed.
So remove the get_device() in bcm_sf2_mdio_register(), and call
put_device() if mdiobus_alloc() or mdiobus_register() fails and in
bcm_sf2_mdio_unregister() to solve the issue.
And as Simon suggested, unwind from errors for bcm_sf2_mdio_register() and
just return 0 if it succeeds to make it cleaner.
Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231011032419.2423290-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since 429e3d123d9a ("bonding: Fix extraction of ports from the packet
headers"), header offsets used to compute a hash in bond_xmit_hash() are
relative to skb->data and not skb->head. If the tail of the header buffer
of an skb really needs to be advanced and the operation is successful, the
pointer to the data must be returned (and not a pointer to the head of the
buffer).
Fixes: 429e3d123d9a ("bonding: Fix extraction of ports from the packet headers")
Signed-off-by: Jiri Wiesner <jwiesner@suse.de>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Although vf_vport entry of struct mlx5e_stats is never updated, its
values are mistakenly copied to the caller structure in the VF
representor .ndo_get_stat_64 callback mlx5e_rep_get_stats(). Remove
redundant entry and use the updated one, rep_stats, instead.
Fixes: 64b68e369649 ("net/mlx5: Refactor and expand rep vport stat group")
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|