summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2024-03-23Merge tag 'hardening-v6.9-rc1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more hardening updates from Kees Cook: - CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck) - Fix needless UTF-8 character in arch/Kconfig (Liu Song) - Improve __counted_by warning message in LKDTM (Nathan Chancellor) - Refactor DEFINE_FLEX() for default use of __counted_by - Disable signed integer overflow sanitizer on GCC < 8 * tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lkdtm/bugs: Improve warning message for compilers without counted_by support overflow: Change DEFINE_FLEX to take __counted_by member Revert "kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST" arch/Kconfig: eliminate needless UTF-8 character in Kconfig help ubsan: Disable signed integer overflow sanitizer on GCC < 8
2024-03-22overflow: Change DEFINE_FLEX to take __counted_by memberKees Cook
The norm should be flexible array structures with __counted_by annotations, so DEFINE_FLEX() is updated to expect that. Rename the non-annotated version to DEFINE_RAW_FLEX(), and update the few existing users. Additionally add selftests for the macros. Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20240306235128.it.933-kees@kernel.org Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2024-03-21Merge tag 'net-6.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from CAN, netfilter, wireguard and IPsec. I'd like to highlight [ lowlight? - Linus ] Florian W stepping down as a netfilter maintainer due to constant stream of bug reports. Not sure what we can do but IIUC this is not the first such case. Current release - regressions: - rxrpc: fix use of page_frag_alloc_align(), it changed semantics and we added a new caller in a different subtree - xfrm: allow UDP encapsulation only in offload modes Current release - new code bugs: - tcp: fix refcnt handling in __inet_hash_connect() - Revert "net: Re-use and set mono_delivery_time bit for userspace tstamp packets", conflicted with some expectations in BPF uAPI Previous releases - regressions: - ipv4: raw: fix sending packets from raw sockets via IPsec tunnels - devlink: fix devlink's parallel command processing - veth: do not manipulate GRO when using XDP - esp: fix bad handling of pages from page_pool Previous releases - always broken: - report RCU QS for busy network kthreads (with Paul McK's blessing) - tcp/rds: fix use-after-free on netns with kernel TCP reqsk - virt: vmxnet3: fix missing reserved tailroom with XDP Misc: - couple of build fixes for Documentation" * tag 'net-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits) selftests: forwarding: Fix ping failure due to short timeout MAINTAINERS: step down as netfilter maintainer netfilter: nf_tables: Fix a memory leak in nf_tables_updchain net: dsa: mt7530: fix handling of all link-local frames net: dsa: mt7530: fix link-local frames that ingress vlan filtering ports bpf: report RCU QS in cpumap kthread net: report RCU QS on threaded NAPI repolling rcu: add a helper to report consolidated flavor QS ionic: update documentation for XDP support lib/bitmap: Fix bitmap_scatter() and bitmap_gather() kernel doc netfilter: nf_tables: do not compare internal table flags on updates netfilter: nft_set_pipapo: release elements in clone only from destroy path octeontx2-af: Use separate handlers for interrupts octeontx2-pf: Send UP messages to VF only when VF is up. octeontx2-pf: Use default max_active works instead of one octeontx2-pf: Wait till detach_resources msg is complete octeontx2: Detect the mbox up or down message via register devlink: fix port new reply cmd type tcp: Clear req->syncookie in reqsk_alloc(). net/bnx2x: Prevent access to a freed page in page_pool ...
2024-03-21Merge tag 'char-misc-6.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the big set of char/misc and a number of other driver subsystem updates for 6.9-rc1. Included in here are: - IIO driver updates, loads of new ones and evolution of existing ones - coresight driver updates - const cleanups for many driver subsystems - speakup driver additions - platform remove callback void cleanups - mei driver updates - mhi driver updates - cdx driver updates for MSI interrupt handling - nvmem driver updates - other smaller driver updates and cleanups, full details in the shortlog All of these have been in linux-next for a long time with no reported issue, other than a build warning for the speakup driver" The build warning hits clang and is a gcc (and C23) extension, and is fixed up in the merge. Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/ * tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits) binder: remove redundant variable page_addr uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion uio_pruss: UIO_MEM_DMA_COHERENT conversion cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT uio: introduce UIO_MEM_DMA_COHERENT type cdx: add MSI support for CDX bus pps: use cflags-y instead of EXTRA_CFLAGS speakup: Add /dev/synthu device speakup: Fix 8bit characters from direct synth parport: sunbpp: Convert to platform remove callback returning void parport: amiga: Convert to platform remove callback returning void char: xillybus: Convert to platform remove callback returning void vmw_balloon: change maintainership MAINTAINERS: change the maintainer for hpilo driver char: xilinx_hwicap: Fix NULL vs IS_ERR() bug hpet: remove hpets::hp_clocksource platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH char: xilinx_hwicap: drop casting to void in dev_set_drvdata greybus: move is_gb_* functions out of greybus.h greybus: Remove usage of the deprecated ida_simple_xx() API ...
2024-03-21Merge tag 'tty-6.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of TTY/Serial driver updates and cleanups for 6.9-rc1. Included in here are: - more tty cleanups from Jiri - loads of 8250 driver cleanups from Andy - max310x driver updates - samsung serial driver updates - uart_prepare_sysrq_char() updates for many drivers - platform driver remove callback void cleanups - stm32 driver updates - other small tty/serial driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) dt-bindings: serial: stm32: add power-domains property serial: 8250_dw: Replace ACPI device check by a quirk serial: Lock console when calling into driver before registration serial: 8250_uniphier: Switch to use uart_read_port_properties() serial: 8250_tegra: Switch to use uart_read_port_properties() serial: 8250_pxa: Switch to use uart_read_port_properties() serial: 8250_omap: Switch to use uart_read_port_properties() serial: 8250_of: Switch to use uart_read_port_properties() serial: 8250_lpc18xx: Switch to use uart_read_port_properties() serial: 8250_ingenic: Switch to use uart_read_port_properties() serial: 8250_dw: Switch to use uart_read_port_properties() serial: 8250_bcm7271: Switch to use uart_read_port_properties() serial: 8250_bcm2835aux: Switch to use uart_read_port_properties() serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties() serial: port: Introduce a common helper to read properties serial: core: Add UPIO_UNKNOWN constant for unknown port type serial: core: Move struct uart_port::quirks closer to possible values serial: sh-sci: Call sci_serial_{in,out}() directly serial: core: only stop transmit when HW fifo is empty serial: pch: Use uart_prepare_sysrq_char(). ...
2024-03-21Merge tag 'linux-can-fixes-for-6.9-20240319' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2024-03-20 this is a pull request of 1 patch for net/master. Martin Jocić contributes a fix for the kvaser_pciefd driver, so that up to 8 channels on the Xilinx-based adapters can be used. This issue has been introduced in net-next for v6.9. linux-can-fixes-for-6.9-20240319 * tag 'linux-can-fixes-for-6.9-20240319' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: kvaser_pciefd: Add additional Xilinx interrupts ==================== Link: https://lore.kernel.org/r/20240320112144.582741-1-mkl@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-21net: dsa: mt7530: fix handling of all link-local framesArınç ÜNAL
Currently, the MT753X switches treat frames with :01-0D and :0F MAC DAs as regular multicast frames, therefore flooding them to user ports. On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE Std 802.1Q™-2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC DA must only be propagated to C-VLAN and MAC Bridge components. That means VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports, these frames are supposed to be processed by the CPU (software). So we make the switch only forward them to the CPU port. And if received from a CPU port, forward to a single port. The software is responsible of making the switch conform to the latter by setting a single port as destination port on the special tag. This switch intellectual property cannot conform to this part of the standard fully. Whilst the REV_UN frame tag covers the remaining :04-0D and :0F MAC DAs, it also includes :22-FF which the scope of propagation is not supposed to be restricted for these MAC DAs. Set frames with :01-03 MAC DAs to be trapped to the CPU port(s). Add a comment for the remaining MAC DAs. Note that the ingress port must have a PVID assigned to it for the switch to forward untagged frames. A PVID is set by default on VLAN-aware and VLAN-unaware ports. However, when the network interface that pertains to the ingress port is attached to a vlan_filtering enabled bridge, the user can remove the PVID assignment from it which would prevent the link-local frames from being trapped to the CPU port. I am yet to see a way to forward link-local frames while preventing other untagged frames from being forwarded too. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-21net: dsa: mt7530: fix link-local frames that ingress vlan filtering portsArınç ÜNAL
Whether VLAN-aware or not, on every VID VLAN table entry that has the CPU port as a member of it, frames are set to egress the CPU port with the VLAN tag stacked. This is so that VLAN tags can be appended after hardware special tag (called DSA tag in the context of Linux drivers). For user ports on a VLAN-unaware bridge, frame ingressing the user port egresses CPU port with only the special tag. For user ports on a VLAN-aware bridge, frame ingressing the user port egresses CPU port with the special tag and the VLAN tag. This causes issues with link-local frames, specifically BPDUs, because the software expects to receive them VLAN-untagged. There are two options to make link-local frames egress untagged. Setting CONSISTENT or UNTAGGED on the EG_TAG bits on the relevant register. CONSISTENT means frames egress exactly as they ingress. That means egressing with the VLAN tag they had at ingress or egressing untagged if they ingressed untagged. Although link-local frames are not supposed to be transmitted VLAN-tagged, if they are done so, when egressing through a CPU port, the special tag field will be broken. BPDU egresses CPU port with VLAN tag egressing stacked, received on software: 00:01:25.104821 AF Unknown (382365846), length 106: | STAG | | VLAN | 0x0000: 0000 6c27 614d 4143 0001 0000 8100 0001 ..l'aMAC........ 0x0010: 0026 4242 0300 0000 0000 0000 6c27 614d .&BB........l'aM 0x0020: 4143 0000 0000 0000 6c27 614d 4143 0000 AC......l'aMAC.. 0x0030: 0000 1400 0200 0f00 0000 0000 0000 0000 ................ BPDU egresses CPU port with VLAN tag egressing untagged, received on software: 00:23:56.628708 AF Unknown (25215488), length 64: | STAG | 0x0000: 0000 6c27 614d 4143 0001 0000 0026 4242 ..l'aMAC.....&BB 0x0010: 0300 0000 0000 0000 6c27 614d 4143 0000 ........l'aMAC.. 0x0020: 0000 0000 6c27 614d 4143 0000 0000 1400 ....l'aMAC...... 0x0030: 0200 0f00 0000 0000 0000 0000 ............ BPDU egresses CPU port with VLAN tag egressing tagged, received on software: 00:01:34.311963 AF Unknown (25215488), length 64: | Mess | 0x0000: 0000 6c27 614d 4143 0001 0001 0026 4242 ..l'aMAC.....&BB 0x0010: 0300 0000 0000 0000 6c27 614d 4143 0000 ........l'aMAC.. 0x0020: 0000 0000 6c27 614d 4143 0000 0000 1400 ....l'aMAC...... 0x0030: 0200 0f00 0000 0000 0000 0000 ............ To prevent confusing the software, force the frame to egress UNTAGGED instead of CONSISTENT. This way, frames can't possibly be received TAGGED by software which would have the special tag field broken. VLAN Tag Egress Procedure For all frames, one of these options set the earliest in this order will apply to the frame: - EG_TAG in certain registers for certain frames. This will apply to frame with matching MAC DA or EtherType. - EG_TAG in the address table. This will apply to frame at its incoming port. - EG_TAG in the PVC register. This will apply to frame at its incoming port. - EG_CON and [EG_TAG per port] in the VLAN table. This will apply to frame at its outgoing port. - EG_TAG in the PCR register. This will apply to frame at its outgoing port. EG_TAG in certain registers for certain frames: PPPoE Discovery_ARP/RARP: PPP_EG_TAG and ARP_EG_TAG in the APC register. IGMP_MLD: IGMP_EG_TAG and MLD_EG_TAG in the IMC register. BPDU and PAE: BPDU_EG_TAG and PAE_EG_TAG in the BPC register. REV_01 and REV_02: R01_EG_TAG and R02_EG_TAG in the RGAC1 register. REV_03 and REV_0E: R03_EG_TAG and R0E_EG_TAG in the RGAC2 register. REV_10 and REV_20: R10_EG_TAG and R20_EG_TAG in the RGAC3 register. REV_21 and REV_UN: R21_EG_TAG and RUN_EG_TAG in the RGAC4 register. With this change, it can be observed that a bridge interface with stp_state and vlan_filtering enabled will properly block ports now. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-20octeontx2-af: Use separate handlers for interruptsSubbaraya Sundeep
For PF to AF interrupt vector and VF to AF vector same interrupt handler is registered which is causing race condition. When two interrupts are raised to two CPUs at same time then two cores serve same event corrupting the data. Fixes: 7304ac4567bc ("octeontx2-af: Add mailbox IRQ and msg handlers") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-20octeontx2-pf: Send UP messages to VF only when VF is up.Subbaraya Sundeep
When PF sending link status messages to VF, it is possible that by the time link_event_task work function is executed VF might have brought down. Hence before sending VF link status message check whether VF is up to receive it. Fixes: ad513ed938c9 ("octeontx2-vf: Link event notification support") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-20octeontx2-pf: Use default max_active works instead of oneSubbaraya Sundeep
Only one execution context for the workqueue used for PF and VFs mailbox communication is incorrect since multiple works are queued simultaneously by all the VFs and PF link UP messages. Hence use default number of execution contexts by passing zero as max_active to alloc_workqueue function. With this fix in place, modify UP messages also to wait until completion. Fixes: d424b6c02415 ("octeontx2-pf: Enable SRIOV and added VF mbox handling") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-20octeontx2-pf: Wait till detach_resources msg is completeSubbaraya Sundeep
During VF driver remove, a message is sent to detach VF resources to PF but VF is not waiting until message is complete. Also mailbox interrupts need to be turned off after the detach resource message is complete. This patch fixes that problem. Fixes: 05fcc9e08955 ("octeontx2-pf: Attach NIX and NPA block LFs") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-20octeontx2: Detect the mbox up or down message via registerSubbaraya Sundeep
A single line of interrupt is used to receive up notifications and down reply messages from AF to PF (similarly from PF to its VF). PF acts as bridge and forwards VF messages to AF and sends respsones back from AF to VF. When an async event like link event is received by up message when PF is in middle of forwarding VF message then mailbox errors occur because PF state machine is corrupted. Since VF is a separate driver or VF driver can be in a VM it is not possible to serialize from the start of communication at VF. Hence to differentiate between type of messages at PF this patch makes sender to set mbox data register with distinct values for up and down messages. Sender also checks whether previous interrupt is received before triggering current interrupt by waiting for mailbox data register to become zero. Fixes: 5a6d7c9daef3 ("octeontx2-pf: Mailbox communication with AF") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-19net/bnx2x: Prevent access to a freed page in page_poolThinh Tran
Fix race condition leading to system crash during EEH error handling During EEH error recovery, the bnx2x driver's transmit timeout logic could cause a race condition when handling reset tasks. The bnx2x_tx_timeout() schedules reset tasks via bnx2x_sp_rtnl_task(), which ultimately leads to bnx2x_nic_unload(). In bnx2x_nic_unload() SGEs are freed using bnx2x_free_rx_sge_range(). However, this could overlap with the EEH driver's attempt to reset the device using bnx2x_io_slot_reset(), which also tries to free SGEs. This race condition can result in system crashes due to accessing freed memory locations in bnx2x_free_rx_sge() 799 static inline void bnx2x_free_rx_sge(struct bnx2x *bp, 800 struct bnx2x_fastpath *fp, u16 index) 801 { 802 struct sw_rx_page *sw_buf = &fp->rx_page_ring[index]; 803 struct page *page = sw_buf->page; .... where sw_buf was set to NULL after the call to dma_unmap_page() by the preceding thread. EEH: Beginning: 'slot_reset' PCI 0011:01:00.0#10000: EEH: Invoking bnx2x->slot_reset() bnx2x: [bnx2x_io_slot_reset:14228(eth1)]IO slot reset initializing... bnx2x 0011:01:00.0: enabling device (0140 -> 0142) bnx2x: [bnx2x_io_slot_reset:14244(eth1)]IO slot reset --> driver unload Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc0080000025065fc Oops: Kernel access of bad area, sig: 11 [#1] ..... Call Trace: [c000000003c67a20] [c00800000250658c] bnx2x_io_slot_reset+0x204/0x610 [bnx2x] (unreliable) [c000000003c67af0] [c0000000000518a8] eeh_report_reset+0xb8/0xf0 [c000000003c67b60] [c000000000052130] eeh_pe_report+0x180/0x550 [c000000003c67c70] [c00000000005318c] eeh_handle_normal_event+0x84c/0xa60 [c000000003c67d50] [c000000000053a84] eeh_event_handler+0xf4/0x170 [c000000003c67da0] [c000000000194c58] kthread+0x1c8/0x1d0 [c000000003c67e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64 To solve this issue, we need to verify page pool allocations before freeing. Fixes: 4cace675d687 ("bnx2x: Alloc 4k fragment for each rx ring buffer element") Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240315205535.1321-1-thinhtr@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-19Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: - Per vq sizes in vdpa - Info query for block devices support in vdpa - DMA sync callbacks in vduse - Fixes, cleanups * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (35 commits) virtio_net: rename free_old_xmit_skbs to free_old_xmit virtio_net: unify the code for recycling the xmit ptr virtio-net: add cond_resched() to the command waiting loop virtio-net: convert rx mode setting to use workqueue virtio: packed: fix unmap leak for indirect desc table vDPA: report virtio-blk flush info to user space vDPA: report virtio-block read-only info to user space vDPA: report virtio-block write zeroes configuration to user space vDPA: report virtio-block discarding configuration to user space vDPA: report virtio-block topology info to user space vDPA: report virtio-block MQ info to user space vDPA: report virtio-block max segments in a request to user space vDPA: report virtio-block block-size to user space vDPA: report virtio-block max segment size to user space vDPA: report virtio-block capacity to user space virtio: make virtio_bus const vdpa: make vdpa_bus const vDPA/ifcvf: implement vdpa_config_ops.get_vq_num_min vDPA/ifcvf: get_max_vq_size to return max size virtio_vdpa: create vqs with the actual size ...
2024-03-19net: phy: fix phy_read_poll_timeout argument type in genphy_loopbackNikita Kiryushin
read_poll_timeout inside phy_read_poll_timeout can set val negative in some cases (for example, __mdiobus_read inside phy_read can return -EOPNOTSUPP). Supposedly, commit 4ec732951702 ("net: phylib: fix phy_read*_poll_timeout()") should fix problems with wrong-signed vals, but I do not see how as val is sent to phy_read as is and __val = phy_read (not val) is checked for sign. Change val type for signed to allow better error handling as done in other phy_read_poll_timeout callers. This will not fix any error handling by itself, but allows, for example, to modify cond with appropriate sign check or check resulting val separately. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 014068dcb5b1 ("net: phy: genphy_loopback: add link speed configuration") Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240315175052.8049-1-kiryushin@ancud.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-19can: kvaser_pciefd: Add additional Xilinx interruptsMartin Jocić
Since Xilinx-based adapters now support up to eight CAN channels, the TX interrupt mask array must have eight elements. Signed-off-by: Martin Jocic <martin.jocic@kvaser.com> Link: https://lore.kernel.org/all/2ab3c0585c3baba272ede0487182a423a420134b.camel@kvaser.com Fixes: 9b221ba452aa ("can: kvaser_pciefd: Add support for Kvaser PCIe 8xCAN") [mkl: replace Link by Fixes tag] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-03-19wireguard: netlink: access device through ctx instead of peerJason A. Donenfeld
The previous commit fixed a bug that led to a NULL peer->device being dereferenced. It's actually easier and faster performance-wise to instead get the device from ctx->wg. This semantically makes more sense too, since ctx->wg->peer_allowedips.seq is compared with ctx->allowedips_seq, basing them both in ctx. This also acts as a defence in depth provision against freed peers. Cc: stable@vger.kernel.org Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-19wireguard: netlink: check for dangling peer via is_dead instead of empty listJason A. Donenfeld
If all peers are removed via wg_peer_remove_all(), rather than setting peer_list to empty, the peer is added to a temporary list with a head on the stack of wg_peer_remove_all(). If a netlink dump is resumed and the cursored peer is one that has been removed via wg_peer_remove_all(), it will iterate from that peer and then attempt to dump freed peers. Fix this by instead checking peer->is_dead, which was explictly created for this purpose. Also move up the device_update_lock lockdep assertion, since reading is_dead relies on that. It can be reproduced by a small script like: echo "Setting config..." ip link add dev wg0 type wireguard wg setconf wg0 /big-config ( while true; do echo "Showing config..." wg showconf wg0 > /dev/null done ) & sleep 4 wg setconf wg0 <(printf "[Peer]\nPublicKey=$(wg genkey)\n") Resulting in: BUG: KASAN: slab-use-after-free in __lock_acquire+0x182a/0x1b20 Read of size 8 at addr ffff88811956ec70 by task wg/59 CPU: 2 PID: 59 Comm: wg Not tainted 6.8.0-rc2-debug+ #5 Call Trace: <TASK> dump_stack_lvl+0x47/0x70 print_address_description.constprop.0+0x2c/0x380 print_report+0xab/0x250 kasan_report+0xba/0xf0 __lock_acquire+0x182a/0x1b20 lock_acquire+0x191/0x4b0 down_read+0x80/0x440 get_peer+0x140/0xcb0 wg_get_device_dump+0x471/0x1130 Cc: stable@vger.kernel.org Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Reported-by: Lillian Berry <lillian@star-ark.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-19wireguard: device: remove generic .ndo_get_stats64Breno Leitao
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is configured") moved the callback to dev_get_tstats64() to net core, so, unless the driver is doing some custom stats collection, it does not need to set .ndo_get_stats64. Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64 function pointer. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-19wireguard: device: leverage core stats allocatorBreno Leitao
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of in this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Remove the allocation in this driver and leverage the network core allocation instead. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-19wireguard: receive: annotate data-race around receiving_counter.counterNikita Zhandarovich
Syzkaller with KCSAN identified a data-race issue when accessing keypair->receiving_counter.counter. Use READ_ONCE() and WRITE_ONCE() annotations to mark the data race as intentional. BUG: KCSAN: data-race in wg_packet_decrypt_worker / wg_packet_rx_poll write to 0xffff888107765888 of 8 bytes by interrupt on cpu 0: counter_validate drivers/net/wireguard/receive.c:321 [inline] wg_packet_rx_poll+0x3ac/0xf00 drivers/net/wireguard/receive.c:461 __napi_poll+0x60/0x3b0 net/core/dev.c:6536 napi_poll net/core/dev.c:6605 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6738 __do_softirq+0xc4/0x279 kernel/softirq.c:553 do_softirq+0x5e/0x90 kernel/softirq.c:454 __local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline] wg_packet_decrypt_worker+0x6c5/0x700 drivers/net/wireguard/receive.c:499 process_one_work kernel/workqueue.c:2633 [inline] ... read to 0xffff888107765888 of 8 bytes by task 3196 on cpu 1: decrypt_packet drivers/net/wireguard/receive.c:252 [inline] wg_packet_decrypt_worker+0x220/0x700 drivers/net/wireguard/receive.c:501 process_one_work kernel/workqueue.c:2633 [inline] process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2706 worker_thread+0x525/0x730 kernel/workqueue.c:2787 ... Fixes: a9e90d9931f3 ("wireguard: noise: separate receive counter from send counter") Reported-by: syzbot+d1de830e4ecdaac83d89@syzkaller.appspotmail.com Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-19virtio_net: rename free_old_xmit_skbs to free_old_xmitXuan Zhuo
Since free_old_xmit_skbs not only deals with skb, but also xdp frame and subsequent added xsk, so change the name of this function to free_old_xmit. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20240229072044.77388-19-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-19virtio_net: unify the code for recycling the xmit ptrXuan Zhuo
There are two completely similar and independent implementations. This is inconvenient for the subsequent addition of new types. So extract a function from this piece of code and call this function uniformly to recover old xmit ptr. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20240229072044.77388-18-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-19virtio-net: add cond_resched() to the command waiting loopJason Wang
Adding cond_resched() to the command waiting loop for a better co-operation with the scheduler. This allows to give CPU a breath to run other task(workqueue) instead of busy looping when preemption is not allowed on a device whose CVQ might be slow. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230720083839.481487-3-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
2024-03-19virtio-net: convert rx mode setting to use workqueueJason Wang
This patch convert rx mode setting to be done in a workqueue, this is a must for allow to sleep when waiting for the cvq command to response since current code is executed under addr spin lock. Note that we need to disable and flush the workqueue during freeze, this means the rx mode setting is lost after resuming. This is not the bug of this patch as we never try to restore rx mode setting during resume. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230720083839.481487-2-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
2024-03-18Merge tag 'trace-v6.9-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: "Main user visible change: - User events can now have "multi formats" The current user events have a single format. If another event is created with a different format, it will fail to be created. That is, once an event name is used, it cannot be used again with a different format. This can cause issues if a library is using an event and updates its format. An application using the older format will prevent an application using the new library from registering its event. A task could also DOS another application if it knows the event names, and it creates events with different formats. The multi-format event is in a different name space from the single format. Both the event name and its format are the unique identifier. This will allow two different applications to use the same user event name but with different payloads. - Added support to have ftrace_dump_on_oops dump out instances and not just the main top level tracing buffer. Other changes: - Add eventfs_root_inode Only the root inode has a dentry that is static (never goes away) and stores it upon creation. There's no reason that the thousands of other eventfs inodes should have a pointer that never gets set in its descriptor. Create a eventfs_root_inode desciptor that has a eventfs_inode descriptor and a dentry pointer, and only the root inode will use this. - Added WARN_ON()s in eventfs There's some conditionals remaining in eventfs that should never be hit, but instead of removing them, add WARN_ON() around them to make sure that they are never hit. - Have saved_cmdlines allocation also include the map_cmdline_to_pid array The saved_cmdlines structure allocates a large amount of data to hold its mappings. Within it, it has three arrays. Two are already apart of it: map_pid_to_cmdline[] and saved_cmdlines[]. More memory can be saved by also including the map_cmdline_to_pid[] array as well. - Restructure __string() and __assign_str() macros used in TRACE_EVENT() Dynamic strings in TRACE_EVENT() are declared with: __string(name, source) And assigned with: __assign_str(name, source) In the tracepoint callback of the event, the __string() is used to get the size needed to allocate on the ring buffer and __assign_str() is used to copy the string into the ring buffer. There's a helper structure that is created in the TRACE_EVENT() macro logic that will hold the string length and its position in the ring buffer which is created by __string(). There are several trace events that have a function to create the string to save. This function is executed twice. Once for __string() and again for __assign_str(). There's no reason for this. The helper structure could also save the string it used in __string() and simply copy that into __assign_str() (it also already has its length). By using the structure to store the source string for the assignment, it means that the second argument to __assign_str() is no longer needed. It will be removed in the next merge window, but for now add a warning if the source string given to __string() is different than the source string given to __assign_str(), as the source to __assign_str() isn't even used and will be going away. - Added checks to make sure that the source of __string() is also the source of __assign_str() so that it can be safely removed in the next merge window. Included fixes that the above check found. - Other minor clean ups and fixes" * tag 'trace-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits) tracing: Add __string_src() helper to help compilers not to get confused tracing: Use strcmp() in __assign_str() WARN_ON() check tracepoints: Use WARN() and not WARN_ON() for warnings tracing: Use div64_u64() instead of do_div() tracing: Support to dump instance traces by ftrace_dump_on_oops tracing: Remove second parameter to __assign_rel_str() tracing: Add warning if string in __assign_str() does not match __string() tracing: Add __string_len() example tracing: Remove __assign_str_len() ftrace: Fix most kernel-doc warnings tracing: Decrement the snapshot if the snapshot trigger fails to register tracing: Fix snapshot counter going between two tracers that use it tracing: Use EVENT_NULL_STR macro instead of open coding "(null)" tracing: Use ? : shortcut in trace macros tracing: Do not calculate strlen() twice for __string() fields tracing: Rework __assign_str() and __string() to not duplicate getting the string cxl/trace: Properly initialize cxl_poison region name net: hns3: tracing: fix hclgevf trace event strings drm/i915: Add missing ; to __assign_str() macros in tracepoint code NFSD: Fix nfsd_clid_class use of __string_len() macro ...
2024-03-18net: hns3: tracing: fix hclgevf trace event stringsSteven Rostedt (Google)
The __string() and __assign_str() helper macros of the TRACE_EVENT() macro are going through some optimizations where only the source string of __string() will be used and the __assign_str() source will be ignored and later removed. To make sure that there's no issues, a new check is added between the __string() src argument and the __assign_str() src argument that does a strcmp() to make sure they are the same string. The hclgevf trace events have: __assign_str(devname, &hdev->nic.kinfo.netdev->name); Which triggers the warning: hclgevf_trace.h:34:39: error: passing argument 1 of ‘strcmp’ from incompatible pointer type [-Werror=incompatible-pointer-types] 34 | __assign_str(devname, &hdev->nic.kinfo.netdev->name); [..] arch/x86/include/asm/string_64.h:75:24: note: expected ‘const char *’ but argument is of type ‘char (*)[16]’ 75 | int strcmp(const char *cs, const char *ct); | ~~~~~~~~~~~~^~ Because __assign_str() now has: WARN_ON_ONCE(__builtin_constant_p(src) ? \ strcmp((src), __data_offsets.dst##_ptr_) : \ (src) != __data_offsets.dst##_ptr_); \ The problem is the '&' on hdev->nic.kinfo.netdev->name. That's because that name is: char name[IFNAMSIZ] Where passing an address '&' of a char array is not compatible with strcmp(). The '&' is not necessary, remove it. Link: https://lore.kernel.org/linux-trace-kernel/20240313093454.3909afe7@gandalf.local.home Cc: netdev <netdev@vger.kernel.org> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Yufeng Mo <moyufeng@huawei.com> Cc: Huazhong Tan <tanhuazhong@huawei.com> Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Jijie Shao <shaojijie@huawei.com> Fixes: d8355240cf8fb ("net: hns3: add trace event support for PF/VF mailbox") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-03-18net: dsa: mt7530: prevent possible incorrect XTAL frequency selectionArınç ÜNAL
On MT7530, the HT_XTAL_FSEL field of the HWTRAP register stores a 2-bit value that represents the frequency of the crystal oscillator connected to the switch IC. The field is populated by the state of the ESW_P4_LED_0 and ESW_P4_LED_0 pins, which is done right after reset is deasserted. ESW_P4_LED_0 ESW_P3_LED_0 Frequency ----------------------------------------- 0 0 Reserved 0 1 20MHz 1 0 40MHz 1 1 25MHz On MT7531, the XTAL25 bit of the STRAP register stores this. The LAN0LED0 pin is used to populate the bit. 25MHz when the pin is high, 40MHz when it's low. These pins are also used with LEDs, therefore, their state can be set to something other than the bootstrapping configuration. For example, a link may be established on port 3 before the DSA subdriver takes control of the switch which would set ESW_P3_LED_0 to high. Currently on mt7530_setup() and mt7531_setup(), 1000 - 1100 usec delay is described between reset assertion and deassertion. Some switch ICs in real life conditions cannot always have these pins set back to the bootstrapping configuration before reset deassertion in this amount of delay. This causes wrong crystal frequency to be selected which puts the switch in a nonfunctional state after reset deassertion. The tests below are conducted on an MT7530 with a 40MHz crystal oscillator by Justin Swartz. With a cable from an active peer connected to port 3 before reset, an incorrect crystal frequency (0b11 = 25MHz) is selected: [1] [3] [5] : : : _____________________________ __________________ ESW_P4_LED_0 |_______| _____________________________ ESW_P3_LED_0 |__________________________ : : : : : : [4]...: : : [2]................: [1] Reset is asserted. [2] Period of 1000 - 1100 usec. [3] Reset is deasserted. [4] Period of 315 usec. HWTRAP register is populated with incorrect XTAL frequency. [5] Signals reflect the bootstrapped configuration. Increase the delay between reset_control_assert() and reset_control_deassert(), and gpiod_set_value_cansleep(priv->reset, 0) and gpiod_set_value_cansleep(priv->reset, 1) to 5000 - 5100 usec. This amount ensures a higher possibility that the switch IC will have these pins back to the bootstrapping configuration before reset deassertion. With a cable from an active peer connected to port 3 before reset, the correct crystal frequency (0b10 = 40MHz) is selected: [1] [2-1] [3] [5] : : : : _____________________________ __________________ ESW_P4_LED_0 |_______| ___________________ _______ ESW_P3_LED_0 |_________| |__________________ : : : : : : [2-2]...: [4]...: [2]................: [1] Reset is asserted. [2] Period of 5000 - 5100 usec. [2-1] ESW_P3_LED_0 goes low. [2-2] Remaining period of 5000 - 5100 usec. [3] Reset is deasserted. [4] Period of 310 usec. HWTRAP register is populated with bootstrapped XTAL frequency. [5] Signals reflect the bootstrapped configuration. ESW_P3_LED_0 low period before reset deassertion: 5000 usec - 5100 usec TEST RESET HOLD # (usec) --------------------- 1 5410 2 5440 3 4375 4 5490 5 5475 6 4335 7 4370 8 5435 9 4205 10 4335 11 3750 12 3170 13 4395 14 4375 15 3515 16 4335 17 4220 18 4175 19 4175 20 4350 Min 3170 Max 5490 Median 4342.500 Avg 4466.500 Revert commit 2920dd92b980 ("net: dsa: mt7530: disable LEDs before reset"). Changing the state of pins via reset assertion is simpler and more efficient than doing so by setting the LED controller off. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch") Co-developed-by: Justin Swartz <justin.swartz@risingedge.co.za> Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-18net: veth: do not manipulate GRO when using XDPIgnat Korchagin
Commit d3256efd8e8b ("veth: allow enabling NAPI even without XDP") tried to fix the fact that GRO was not possible without XDP, because veth did not use NAPI without XDP. However, it also introduced the behaviour that GRO is always enabled, when XDP is enabled. While it might be desired for most cases, it is confusing for the user at best as the GRO flag suddenly changes, when an XDP program is attached. It also introduces some complexities in state management as was partially addressed in commit fe9f801355f0 ("net: veth: clear GRO when clearing XDP even when down"). But the biggest problem is that it is not possible to disable GRO at all, when an XDP program is attached, which might be needed for some use cases. Fix this by not touching the GRO flag on XDP enable/disable as the code already supports switching to NAPI if either GRO or XDP is requested. Link: https://lore.kernel.org/lkml/20240311124015.38106-1-ignat@cloudflare.com/ Fixes: d3256efd8e8b ("veth: allow enabling NAPI even without XDP") Fixes: fe9f801355f0 ("net: veth: clear GRO when clearing XDP even when down") Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-18net: wan: fsl_qmc_hdlc: Fix module compilationHerve Codina
The fsl_qmc_driver does not compile as module: error: ‘qmc_hdlc_driver’ undeclared here (not in a function); 405 | MODULE_DEVICE_TABLE(of, qmc_hdlc_driver); | ^~~~~~~~~~~~~~~ Fix the typo. Fixes: b40f00ecd463 ("net: wan: Add support for QMC HDLC") Reported-by: Michael Ellerman <mpe@ellerman.id.au> Closes: https://lore.kernel.org/linux-kernel/87ttl93f7i.fsf@mail.lhotse/ Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-15Merge tag 'powerpc-6.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add AT_HWCAP3 and AT_HWCAP4 aux vector entries for future use by glibc - Add support for recognising the Power11 architected and raw PVRs - Add support for nr_cpus=n on the command line where the boot CPU is >= n - Add ppcxx_allmodconfig targets for all 32-bit sub-arches - Other small features, cleanups and fixes Thanks to Akanksha J N, Brian King, Christophe Leroy, Dawei Li, Geoff Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Kajol Jain, Kunwu Chan, Li zeming, Madhavan Srinivasan, Masahiro Yamada, Nathan Chancellor, Nicholas Piggin, Peter Bergner, Qiheng Lin, Randy Dunlap, Ricardo B. Marliere, Rob Herring, Sathvika Vasireddy, Shrikanth Hegde, Uwe Kleine-König, Vaibhav Jain, and Wen Xiong. * tag 'powerpc-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (71 commits) powerpc/macio: Make remove callback of macio driver void returned powerpc/83xx: Fix build failure with FPU=n powerpc/64s: Fix get_hugepd_cache_index() build failure powerpc/4xx: Fix warp_gpio_leds build failure powerpc/amigaone: Make several functions static powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc. macintosh/adb: make adb_dev_class constant powerpc: xor_vmx: Add '-mhard-float' to CFLAGS powerpc/fsl: Fix mfpmr() asm constraint error powerpc: Remove cpu-as-y completely powerpc/fsl: Modernise mt/mfpmr powerpc/fsl: Fix mfpmr build errors with newer binutils powerpc/64s: Use .machine power4 around dcbt powerpc/64s: Move dcbt/dcbtst sequence into a macro powerpc/mm: Code cleanup for __hash_page_thp powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks powerpc/irq: Allow softirq to hardirq stack transition powerpc: Stop using of_root powerpc/machdep: Define 'compatibles' property in ppc_md and use it of: Reimplement of_machine_is_compatible() using of_machine_compatible_match() ...
2024-03-15net: ethernet: mtk_eth_soc: fix PPE hanging issueDaniel Golle
A patch to resolve an issue was found in MediaTek's GPL-licensed SDK: In the mtk_ppe_stop() function, the PPE scan mode is not disabled before disabling the PPE. This can potentially lead to a hang during the process of disabling the PPE. Without this patch, the PPE may experience a hang during the reboot test. Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/b40da332dfe763932a82f9f62a4709457a15dd6c Fixes: ba37b7caf1ed ("net: ethernet: mtk_eth_soc: add support for initializing the PPE") Suggested-by: Bc-bocun Chen <bc-bocun.chen@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-15net: mediatek: mtk_eth_soc: clear MAC_MCR_FORCE_LINK only when MAC is upDaniel Golle
Clearing bit MAC_MCR_FORCE_LINK which forces the link down too early can result in MAC ending up in a broken/blocked state. Fix this by handling this bit in the .mac_link_up and .mac_link_down calls instead of in .mac_finish. Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support") Suggested-by: Mason-cw Chang <Mason-cw.Chang@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-14Merge tag 'mm-nonmm-stable-2024-03-14-09-36' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min heap optimizations". - Kuan-Wei Chiu has also sped up the library sorting code in the series "lib/sort: Optimize the number of swaps and comparisons". - Alexey Gladkov has added the ability for code running within an IPC namespace to alter its IPC and MQ limits. The series is "Allow to change ipc/mq sysctls inside ipc namespace". - Geert Uytterhoeven has contributed some dhrystone maintenance work in the series "lib: dhry: miscellaneous cleanups". - Ryusuke Konishi continues nilfs2 maintenance work in the series "nilfs2: eliminate kmap and kmap_atomic calls" "nilfs2: fix kernel bug at submit_bh_wbc()" - Nathan Chancellor has updated our build tools requirements in the series "Bump the minimum supported version of LLVM to 13.0.1". - Muhammad Usama Anjum continues with the selftests maintenance work in the series "selftests/mm: Improve run_vmtests.sh". - Oleg Nesterov has done some maintenance work against the signal code in the series "get_signal: minor cleanups and fix". Plus the usual shower of singleton patches in various parts of the tree. Please see the individual changelogs for details. * tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) nilfs2: prevent kernel bug at submit_bh_wbc() nilfs2: fix failure to detect DAT corruption in btree and direct mappings ocfs2: enable ocfs2_listxattr for special files ocfs2: remove SLAB_MEM_SPREAD flag usage assoc_array: fix the return value in assoc_array_insert_mid_shortcut() buildid: use kmap_local_page() watchdog/core: remove sysctl handlers from public header nilfs2: use div64_ul() instead of do_div() mul_u64_u64_div_u64: increase precision by conditionally swapping a and b kexec: copy only happens before uchunk goes to zero get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig get_signal: don't abuse ksig->info.si_signo and ksig->sig const_structs.checkpatch: add device_type Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>" dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace() list: leverage list_is_head() for list_entry_is_head() nilfs2: MAINTAINERS: drop unreachable project mirror site smp: make __smp_processor_id() 0-argument macro fat: fix uninitialized field in nostale filehandles ...
2024-03-14net: txgbe: fix clk_name exceed MAX_DEV_ID limitsDuanqiang Wen
txgbe register clk which name is i2c_designware.pci_dev_id(), clk_name will be stored in clk_lookup_alloc. If PCIe bus number is larger than 0x39, clk_name size will be larger than 20 bytes. It exceeds clk_lookup_alloc MAX_DEV_ID limits. So the driver shortened clk_name. Fixes: b63f20485e43 ("net: txgbe: Register fixed rate clock") Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://lore.kernel.org/r/20240313080634.459523-1-duanqiangwen@net-swift.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-14vmxnet3: Fix missing reserved tailroomWilliam Tu
Use rbi->len instead of rcd->len for non-dataring packet. Found issue: XDP_WARN: xdp_update_frame_from_buff(line:278): Driver BUG: missing reserved tailroom WARNING: CPU: 0 PID: 0 at net/core/xdp.c:586 xdp_warn+0xf/0x20 CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W O 6.5.1 #1 RIP: 0010:xdp_warn+0xf/0x20 ... ? xdp_warn+0xf/0x20 xdp_do_redirect+0x15f/0x1c0 vmxnet3_run_xdp+0x17a/0x400 [vmxnet3] vmxnet3_process_xdp+0xe4/0x760 [vmxnet3] ? vmxnet3_tq_tx_complete.isra.0+0x21e/0x2c0 [vmxnet3] vmxnet3_rq_rx_complete+0x7ad/0x1120 [vmxnet3] vmxnet3_poll_rx_only+0x2d/0xa0 [vmxnet3] __napi_poll+0x20/0x180 net_rx_action+0x177/0x390 Reported-by: Martin Zaharinov <micron10@gmail.com> Tested-by: Martin Zaharinov <micron10@gmail.com> Link: https://lore.kernel.org/netdev/74BF3CC8-2A3A-44FF-98C2-1E20F110A92E@gmail.com/ Fixes: 54f00cce1178 ("vmxnet3: Add XDP support.") Signed-off-by: William Tu <witu@nvidia.com> Link: https://lore.kernel.org/r/20240309183147.28222-1-witu@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-13Merge tag 'thermal-6.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These mostly change the thermal core in a few ways allowing thermal drivers to be simplified, in particular in their removal and failing probe handling parts that are notoriously prone to errors, and propagate the changes to several drivers. Apart from that, support for a new platform is added (Intel Lunar Lake-M), some bugs are fixed and some code is cleaned up, as usual. Specifics: - Store zone trips table and zone operations directly in struct thermal_zone_device (Rafael Wysocki) - Fix up flex array initialization during thermal zone device registration (Nathan Chancellor) - Rework writable trip points handling in the thermal core and several drivers (Rafael Wysocki) - Thermal core code cleanups (Dan Carpenter, Flavio Suligoi) - Use thermal zone accessor functions in the int340x Intel thermal driver (Rafael Wysocki) - Add Lunar Lake-M PCI ID to the int340x Intel thermal driver (Srinivas Pandruvada) - Minor fixes for thermal governors (Rafael Wysocki, Di Shen) - Trip point handling fixes for the iwlwifi wireless driver (Rafael Wysocki) - Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno)" * tag 'thermal-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits) thermal: core: remove unnecessary check in trip_point_hyst_store() thermal: intel: int340x_thermal: Use thermal zone accessor functions thermal: core: Remove excess empty line from a comment thermal: int340x: processor_thermal: Add Lunar Lake-M PCI ID thermal: core: Eliminate writable trip points masks thermal: of: Set THERMAL_TRIP_FLAG_RW_TEMP directly thermal: imx: Set THERMAL_TRIP_FLAG_RW_TEMP directly wifi: iwlwifi: mvm: Set THERMAL_TRIP_FLAG_RW_TEMP directly mlxsw: core_thermal: Set THERMAL_TRIP_FLAG_RW_TEMP directly thermal: intel: Set THERMAL_TRIP_FLAG_RW_TEMP directly thermal: core: Drop the .set_trip_hyst() thermal zone operation thermal: core: Add flags to struct thermal_trip thermal: core: Move initial num_trips assignment before memcpy() thermal: Get rid of CONFIG_THERMAL_WRITABLE_TRIPS thermal: intel: Adjust ops handling during thermal zone registration thermal: ACPI: Constify acpi_thermal_zone_ops thermal: core: Store zone ops in struct thermal_zone_device thermal: intel: Discard trip tables after zone registration thermal: ACPI: Discard trips table after zone registration thermal: core: Store zone trips table in struct thermal_zone_device ...
2024-03-13Merge tag 'pm-6.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "From the functional perspective, the most significant change here is the addition of support for Energy Models that can be updated dynamically at run time. There is also the addition of LZ4 compression support for hibernation, the new preferred core support in amd-pstate, new platforms support in the Intel RAPL driver, new model-specific EPP handling in intel_pstate and more. Apart from that, the cpufreq default transition delay is reduced from 10 ms to 2 ms (along with some related adjustments), the system suspend statistics code undergoes a significant rework and there is a usual bunch of fixes and code cleanups all over. Specifics: - Allow the Energy Model to be updated dynamically (Lukasz Luba) - Add support for LZ4 compression algorithm to the hibernation image creation and loading code (Nikhil V) - Fix and clean up system suspend statistics collection (Rafael Wysocki) - Simplify device suspend and resume handling in the power management core code (Rafael Wysocki) - Fix PCI hibernation support description (Yiwei Lin) - Make hibernation take set_memory_ro() return values into account as appropriate (Christophe Leroy) - Set mem_sleep_current during kernel command line setup to avoid an ordering issue with handling it (Maulik Shah) - Fix wake IRQs handling when pm_runtime_force_suspend() is used as a driver's system suspend callback (Qingliang Li) - Simplify pm_runtime_get_if_active() usage and add a replacement for pm_runtime_put_autosuspend() (Sakari Ailus) - Add a tracepoint for runtime_status changes tracking (Vilas Bhat) - Fix section title markdown in the runtime PM documentation (Yiwei Lin) - Enable preferred core support in the amd-pstate cpufreq driver (Meng Li) - Fix min_perf assignment in amd_pstate_adjust_perf() and make the min/max limit perf values in amd-pstate always stay within the (highest perf, lowest perf) range (Tor Vic, Meng Li) - Allow intel_pstate to assign model-specific values to strings used in the EPP sysfs interface and make it do so on Meteor Lake (Srinivas Pandruvada) - Drop long-unused cpudata::prev_cummulative_iowait from the intel_pstate cpufreq driver (Jiri Slaby) - Prevent scaling_cur_freq from exceeding scaling_max_freq when the latter is an inefficient frequency (Shivnandan Kumar) - Change default transition delay in cpufreq to 2ms (Qais Yousef) - Remove references to 10ms minimum sampling rate from comments in the cpufreq code (Pierre Gondois) - Honour transition_latency over transition_delay_us in cpufreq (Qais Yousef) - Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar) - General enhancements / cleanups to ARM cpufreq drivers (tianyu2, Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia Belova) - Update cpufreq-dt-platdev to block/approve devices (Richard Acayan) - Make the SCMI cpufreq driver get a transition delay value from firmware (Pierre Gondois) - Prevent the haltpoll cpuidle governor from shrinking guest poll_limit_ns below grow_start (Parshuram Sangle) - Avoid potential overflow in integer multiplication when computing cpuidle state parameters (C Cheng) - Adjust MWAIT hint target C-state computation in the ACPI cpuidle driver and in intel_idle to return a correct value for C0 (He Rongguang) - Address multiple issues in the TPMI RAPL driver and add support for new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui) - Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel Lezcano) - Fix kernel-doc for dtpm_create_hierarchy() (Yang Li) - Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth Norway Ananda) - Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil) - Fix a couple of warnings in the OPP core code related to W=1 builds (Viresh Kumar) - Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh Kumar) - Extend dev_pm_opp_data with turbo support (Sibi Sankar) - dt-bindings: drop maxItems from inner items (David Heidelberg)" * tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits) dt-bindings: opp: drop maxItems from inner items OPP: debugfs: Fix warning around icc_get_name() OPP: debugfs: Fix warning with W=1 builds cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h OPP: Extend dev_pm_opp_data with turbo support Fix cpupower-frequency-info.1 man page typo cpufreq: scmi: Set transition_delay_us firmware: arm_scmi: Populate fast channel rate_limit firmware: arm_scmi: Populate perf commands rate_limit cpuidle: ACPI/intel: fix MWAIT hint target C-state computation PM: sleep: wakeirq: fix wake irq warning in system suspend powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function cpufreq: Don't unregister cpufreq cooling on CPU hotplug PM: suspend: Set mem_sleep_current during kernel command line setup cpufreq: Honour transition_latency over transition_delay_us cpufreq: Limit resolving a frequency to policy min/max Documentation: PM: Fix runtime_pm.rst markdown syntax cpufreq: amd-pstate: adjust min/max limit perf cpufreq: Remove references to 10ms min sampling rate cpufreq: intel_pstate: Update default EPPs for Meteor Lake ...
2024-03-13Merge tag 'spi-v6.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "This release sees some exciting changes from David Lechner which implements some optimisations that have been talked about for a long time which allows client drivers to pre-prepare SPI messages for repeated or low latency use. This lets us move work out of latency sensitive paths and avoid repeating work for frequently performed operations. As well as being useful in itself this will also be used in future to allow controllers to directly trigger SPI operations (eg, from interrupts). Otherwise this release has mostly been focused on cleanups, plus a couple of new devices: - Support for pre-optimising messages - A big set of updates from Uwe Kleine-König moving drivers to use APIs with more modern terminology for controllers - Major overhaul of the s3c64xx driver - Support for Google GS101 and Samsung Exynos850" * tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits) spi: Introduce SPI_INVALID_CS and is_valid_cs() spi: Fix types of the last chip select storage variables spi: Consistently use BIT for cs_index_mask spi: Exctract spi_dev_check_cs() helper spi: Exctract spi_set_all_cs_unused() helper spi: s3c64xx: switch exynos850 to new port config data spi: s3c64xx: switch gs101 to new port config data spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id spi: s3c64xx: get rid of the OF alias ID dependency spi: s3c64xx: introduce s3c64xx_spi_set_port_id() spi: s3c64xx: let the SPI core determine the bus number spi: s3c64xx: allow FIFO depth to be determined from the compatible spi: s3c64xx: retrieve the FIFO depth from the device tree spi: s3c64xx: determine the fifo depth only once spi: s3c64xx: allow full FIFO masks spi: s3c64xx: define a magic value spi: dt-bindings: introduce FIFO depth properties spi: axi-spi-engine: use struct_size() macro spi: axi-spi-engine: use __counted_by() attribute spi: axi-spi-engine: remove p from struct spi_engine_message_state ...
2024-03-13octeontx2-af: Use matching wake_up API variant in CGX command interfaceLinu Cherian
Use wake_up API instead of wake_up_interruptible, since wait_event_timeout API is used for waiting on command completion. Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management") Signed-off-by: Linu Cherian <lcherian@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.9 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-11vxlan: Remove generic .ndo_get_stats64Breno Leitao
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is configured") moved the callback to dev_get_tstats64() to net core, so, unless the driver is doing some custom stats collection, it does not need to set .ndo_get_stats64. Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64 function pointer. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://lore.kernel.org/r/20240311112437.3813987-2-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-11vxlan: Do not alloc tstats manuallyBreno Leitao
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of in this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Remove the allocation in the vxlan driver and leverage the network core allocation instead. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://lore.kernel.org/r/20240311112437.3813987-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-11nfp: flower: handle acti_netdevs allocation failureDuoming Zhou
The kmalloc_array() in nfp_fl_lag_do_work() will return null, if the physical memory has run out. As a result, if we dereference the acti_netdevs, the null pointer dereference bugs will happen. This patch adds a check to judge whether allocation failure occurs. If it happens, the delayed work will be rescheduled and try again. Fixes: bb9a8d031140 ("nfp: flower: monitor and offload LAG groups") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20240308142540.9674-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-11ravb: Correct buffer size to map for R-Car RxNiklas Söderlund
When creating a helper to allocate and align an skb one location where the skb data size was updated was missed. This can lead to a warning being printed when the memory is being unmapped as it now always unmap the maximum frame size, instead of the size after it have been aligned. This was correctly done for RZ/G2L but missed for R-Car. Fixes: cfbad64706c1 ("ravb: Create helper to allocate skb and align it") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240308224237.496924-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-11net: amt: Remove generic .ndo_get_stats64Breno Leitao
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is configured") moved the callback to dev_get_tstats64() to net core, so, unless the driver is doing some custom stats collection, it does not need to set .ndo_get_stats64. Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64 function pointer. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20240308162606.1597287-2-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-11net: amt: Move stats allocation to coreBreno Leitao
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Move amt driver to leverage the core allocation. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20240308162606.1597287-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-11net: wan: framer/pef2256: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/9684419fd714cc489a3ef36d838d3717bb6aec6d.1709886922.git.u.kleine-koenig@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-11mlxsw: spectrum_router: Share nexthop counters in resilient groupsPetr Machata
For resilient groups, we can reuse the same counter for all the buckets that share the same nexthop. Keep a reference count per counter, and keep all these counters in a per-next hop group xarray, which serves as a NHID->counter cache. If a counter is already present for a given NHID, just take a reference and use the same counter. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/cdd00084533fc83ac5917562f54642f008205bf3.1709901020.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>