summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt7915/main.c
AgeCommit message (Collapse)Author
2022-06-20wifi: mac80211: split bss_info_changed methodJohannes Berg
Split the bss_info_changed method to vif_cfg_changed and link_info_changed, with the latter getting a link ID. Also change the 'changed' parameter to u64 already, we know we need that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move interface config to new structJohannes Berg
We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-13mt76: mt7915: add support for 6G in-band discoveryMeiChia Chiu
Add offloading FILS discovery and unsolicited broadcast probe response support. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: add Wireless Ethernet Dispatch supportFelix Fietkau
This is used to support hardware flow offloading from Ethernet to WLAN Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: remove SCS featureRyder Lee
SCS is obsoleted and no longer used, so remove it. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: use 0xff to initialize bitrate_mask in mt7915_init_bitrate_maskLorenzo Bianconi
Use 0xff (GENMASK(7,0)) in mt7915_init_bitrate_mask routine in order to initialize bitrate_mask structure in order to avoid truncating value in memset(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: fix MBSS index condition in DBDC modeEvelyn Tsai
MT7915_MAX_INTERFACES is per-band declaration in MT7915/MT7986/MT7916. Enlarge vif_mask to 64 bits wide, including the bit operation. Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: fix use-after-free by removing a non-RCU wcid pointerFelix Fietkau
Fixes an issue caught by KASAN about use-after-free in mt76_txq_schedule by protecting mtxq->wcid with rcu_lock between mt76_txq_schedule and sta_info_[alloc, free]. [18853.876689] ================================================================== [18853.876751] BUG: KASAN: use-after-free in mt76_txq_schedule+0x204/0xaf8 [mt76] [18853.876773] Read of size 8 at addr ffffffaf989a2138 by task mt76-tx phy0/883 [18853.876786] [18853.876810] CPU: 5 PID: 883 Comm: mt76-tx phy0 Not tainted 5.10.100-fix-510-56778d365941-kasan #5 0b01fbbcf41a530f52043508fec2e31a4215 [18853.876840] Call trace: [18853.876861] dump_backtrace+0x0/0x3ec [18853.876878] show_stack+0x20/0x2c [18853.876899] dump_stack+0x11c/0x1ac [18853.876918] print_address_description+0x74/0x514 [18853.876934] kasan_report+0x134/0x174 [18853.876948] __asan_report_load8_noabort+0x44/0x50 [18853.876976] mt76_txq_schedule+0x204/0xaf8 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877002] mt76_txq_schedule_all+0x2c/0x48 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877030] mt7921_tx_worker+0xa0/0x1cc [mt7921_common f0875ebac9d7b4754e1010549e7db50fbd90a047] [18853.877054] __mt76_worker_fn+0x190/0x22c [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877071] kthread+0x2f8/0x3b8 [18853.877087] ret_from_fork+0x10/0x30 [18853.877098] [18853.877112] Allocated by task 941: [18853.877131] kasan_save_stack+0x38/0x68 [18853.877147] __kasan_kmalloc+0xd4/0xfc [18853.877163] kasan_kmalloc+0x10/0x1c [18853.877177] __kmalloc+0x264/0x3c4 [18853.877294] sta_info_alloc+0x460/0xf88 [mac80211] [18853.877410] ieee80211_prep_connection+0x204/0x1ee0 [mac80211] [18853.877523] ieee80211_mgd_auth+0x6c4/0xa4c [mac80211] [18853.877635] ieee80211_auth+0x20/0x2c [mac80211] [18853.877733] rdev_auth+0x7c/0x438 [cfg80211] [18853.877826] cfg80211_mlme_auth+0x26c/0x390 [cfg80211] [18853.877919] nl80211_authenticate+0x6d4/0x904 [cfg80211] [18853.877938] genl_rcv_msg+0x748/0x93c [18853.877954] netlink_rcv_skb+0x160/0x2a8 [18853.877969] genl_rcv+0x3c/0x54 [18853.877985] netlink_unicast_kernel+0x104/0x1ec [18853.877999] netlink_unicast+0x178/0x268 [18853.878015] netlink_sendmsg+0x3cc/0x5f0 [18853.878030] sock_sendmsg+0xb4/0xd8 [18853.878043] ____sys_sendmsg+0x2f8/0x53c [18853.878058] ___sys_sendmsg+0xe8/0x150 [18853.878071] __sys_sendmsg+0xc4/0x1f4 [18853.878087] __arm64_compat_sys_sendmsg+0x88/0x9c [18853.878101] el0_svc_common+0x1b4/0x390 [18853.878115] do_el0_svc_compat+0x8c/0xdc [18853.878131] el0_svc_compat+0x10/0x1c [18853.878146] el0_sync_compat_handler+0xa8/0xcc [18853.878161] el0_sync_compat+0x188/0x1c0 [18853.878171] [18853.878183] Freed by task 10927: [18853.878200] kasan_save_stack+0x38/0x68 [18853.878215] kasan_set_track+0x28/0x3c [18853.878228] kasan_set_free_info+0x24/0x48 [18853.878244] __kasan_slab_free+0x11c/0x154 [18853.878259] kasan_slab_free+0x14/0x24 [18853.878273] slab_free_freelist_hook+0xac/0x1b0 [18853.878287] kfree+0x104/0x390 [18853.878402] sta_info_free+0x198/0x210 [mac80211] [18853.878515] __sta_info_destroy_part2+0x230/0x2d4 [mac80211] [18853.878628] __sta_info_flush+0x300/0x37c [mac80211] [18853.878740] ieee80211_set_disassoc+0x2cc/0xa7c [mac80211] [18853.878851] ieee80211_mgd_deauth+0x4a4/0x10a0 [mac80211] [18853.878962] ieee80211_deauth+0x20/0x2c [mac80211] [18853.879057] rdev_deauth+0x7c/0x438 [cfg80211] [18853.879150] cfg80211_mlme_deauth+0x274/0x414 [cfg80211] [18853.879243] cfg80211_mlme_down+0xe4/0x118 [cfg80211] [18853.879335] cfg80211_disconnect+0x218/0x2d8 [cfg80211] [18853.879427] __cfg80211_leave+0x17c/0x240 [cfg80211] [18853.879519] cfg80211_leave+0x3c/0x58 [cfg80211] [18853.879611] wiphy_suspend+0xdc/0x200 [cfg80211] [18853.879628] dpm_run_callback+0x58/0x408 [18853.879642] __device_suspend+0x4cc/0x864 [18853.879658] async_suspend+0x34/0xf4 [18853.879673] async_run_entry_fn+0xe0/0x37c [18853.879689] process_one_work+0x508/0xb98 [18853.879702] worker_thread+0x7f4/0xcd4 [18853.879717] kthread+0x2f8/0x3b8 [18853.879731] ret_from_fork+0x10/0x30 [18853.879741] [18853.879757] The buggy address belongs to the object at ffffffaf989a2000 [18853.879757] which belongs to the cache kmalloc-8k of size 8192 [18853.879774] The buggy address is located 312 bytes inside of [18853.879774] 8192-byte region [ffffffaf989a2000, ffffffaf989a4000) [18853.879787] The buggy address belongs to the page: [18853.879807] page:000000004bda2a59 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d89a0 [18853.879823] head:000000004bda2a59 order:3 compound_mapcount:0 compound_pincount:0 [18853.879839] flags: 0x8000000000010200(slab|head) [18853.879857] raw: 8000000000010200 ffffffffbc89e208 ffffffffb7fb5208 ffffffaec000cc80 [18853.879873] raw: 0000000000000000 0000000000010001 00000001ffffffff 0000000000000000 [18853.879885] page dumped because: kasan: bad access detected [18853.879896] [18853.879907] Memory state around the buggy address: [18853.879922] ffffffaf989a2000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879935] ffffffaf989a2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879948] >ffffffaf989a2100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879961] ^ [18853.879973] ffffffaf989a2180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879986] ffffffaf989a2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879998] ================================================================== Cc: stable@vger.kernel.org Reported-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7915: introduce band_idx in mt7915_phyBo Jiao
The wfsys of MT7986 has only single adie chip for non-dbdc devices, and it binds to band1 by default. Hence this patch adds band_idx to explicitly configure phy accordingly. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7915: add support for MT7986Bo Jiao
This adds MT7986 SoC integrated multi-band 4x4 WiFi 6/6E. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: fix/rewrite the dfs state handling logicFelix Fietkau
Client mode on DFS channels was broken, because the old code was activating the DFS detector on radar channels while leaving it in CAC state. This was caused by making the decision based on the channel radar flag, instead of hw->conf.radar_enabled. In order to properly deal with the various corner cases, rip out the state handling code and replace it with something that's much easier to reason about. Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: stop the radar detector after leaving dfs channelXing Song
The radar detctor is used for dfs channel. So it will start after switching to dfs channel and will stop after leaving. The TX will be blocked if radar detctor isn't stopped in non-dfs channel. This patch resets the dfs state to indicate the radar detector needs to be stopped. Signed-off-by: Xing Song <xing.song@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: move mt76_connac_lmac_mapping in mt76-connac moduleLorenzo Bianconi
mt76_connac_lmac_mapping is shared between mt7921 and mt7915 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: introduce mt7915_set_radar_background routineLorenzo Bianconi
Introduce mt7915_mcu_rdd_background_enable and mt7915_mcu_background_chain_ctrl routines to configure rx dfs dedicated chain. This is a preliminary patch to add zero-wait dfs support performing CAC detection on rdd2. Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: set bssinfo/starec command when adding interfaceShayne Chen
bssinfo/starec disabled commands are sent during removing interface. However, if we don't set corresponding enabled commands before removing interface, the fw may enter an exception state due to some NULL structs. For example, the following commands can cause fw timeout in our newer chips: ifconfig wlan0/mon0 up ifconfig wlan0/mon0 down Fix this by setting enabled commands once interface added. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: update bss_info with cipher after setting the group keyFelix Fietkau
In some cases, the WA firmware needs to know if encryption is used, in order to set the protection bit of packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: rely on mt76_connac_mcu_set_rts_threshLorenzo Bianconi
Rely on mt76_connac_mcu_set_rts_thresh routine in mt7915 driver and remove duplicated code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: move mt76_connac_mcu_set_pm in connac moduleLorenzo Bianconi
Move mt76_connac_mcu_set_pm utility routine in connac module since it is shared between mt7615 and mt7915 drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: move mt76_connac_mcu_wtbl_update_hdr_trans in connac moduleLorenzo Bianconi
Move mt76_connac_mcu_wtbl_update_hdr_trans routine in mt76-connac module since it is shared between mt7915 and mt7615 drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: move mt76_connac_mcu_add_key in connac moduleLorenzo Bianconi
Move key configuration code shared between mt7921 and mt7915 in mt76-connac module and remove duplicated code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: update rx rate reporting for mt7916Bo Jiao
mt7916 reports rx rate from rxd group3 directly. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: refine register definitionBo Jiao
Add mt7915_reg_desc to differentiate chip generations. This is an intermediate patch to introduce mt7916 support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7915: introduce mt76_vif in mt7915_vifLorenzo Bianconi
Align mt7915_vif layout to mt7921_vif and mt7615_vif Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7915: introduce SAR supportLorenzo Bianconi
Add SAR spec support to mt7915 driver to allow configuring SAR power limitations on the frequency ranges from the userland. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7915: improve wmm index allocationFelix Fietkau
Typically all AP interfaces on a PHY will share the same WMM settings, while sta/mesh interfaces will usually inherit the settings from a remote device. In order minimize the likelihood of conflicting WMM settings, make all AP interfaces share one slot, and all non-AP interfaces another one. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: rework .set_bitrate_mask() to support more optionsRyder Lee
With this patch, driver can support single rate, (HE)GI and HE_LTF configuration through .set_bitrate_mask(). Tested-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: remove mt7915_mcu_add_he()Ryder Lee
Make mt7915_mcu_sta_he_tlv() as a part of mt7915_mcu_add_rate_ctrl() as firmware rate control should get HE rate information from sta_rec_he, and reduce a global function accordingly. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: do not reset MIB counters in get_stats callbackLorenzo Bianconi
MIB counters are used for ethtool stats as well Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: move tx amsdu stats in mib_statsLorenzo Bianconi
Move tx_amsdu histogram stats in mib_stats structure since registers are clear-on-read Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: run mt7915_get_et_stats holding mt76 mutexLorenzo Bianconi
Since it can run in parallel with mac_work, hold mutex lock in mt7915_get_et_stats. Moreover update mib counters running mt7915_get_et_stats. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: move mt76_ethtool_worker_info in mt76 moduleLorenzo Bianconi
Move mt76_ethtool_worker_info in common code in order to be reused in mt7921 driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: move mt76_sta_stats in mt76.hLorenzo Bianconi
This is a preliminary patch to add ethtool stats to mt7921 driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: rework starec TLV tagsShayne Chen
Rework starec tags to the order which firmware expected. This also fixes some weird behaviors during generating SPL of HE-MU. Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: introduce mt7915_mcu_beacon_check_caps()Ryder Lee
Beacon elements might be changed by hostapd configuraion, so driver should compare both IEs and PHY capabilities to get the least common denominator before association. Co-developed-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: introduce mt7915_mac_add_twt_setup routineLorenzo Bianconi
Introduce individual TWT support to mt7915 in AP mode. Implement the two following mac80211 callbacks: - add_twt_setup - twt_teardown_request Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: introduce __mt7915_get_tsf routineLorenzo Bianconi
Introduce an unlocked verion of mt7915_get_tsf routine. This is a preliminary patch to add TWT support to mt7915. Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: introduce packet_id idrLorenzo Bianconi
Introduce per-wcid idr to manage packet id for txs. This allow fast idr lookup and skb queueing at the same time. Tested-by: mrkiko.rs@gmail.com Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: add mib counters to ethtool statsBen Greear
This adds the new mib counters from last patch into ethtool stats. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: add tx mu/su counters to mibBen Greear
These counters are clear-on-read, so we need to accumulate them in the update_stats poll logic, and read the accumulated values instead of directly doing register reads when reporting to debugfs and ethtool stats. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: add some per-station tx stats to ethtoolBen Greear
The tx status callback is not called for every frame, so those specific counters under-count, but at least they give some idea of what is going on. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: add ethtool stats supportBen Greear
This exposes some tx-path stats to the ethtool API, so that ethtool -S wlanX provides some more useful info. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: fix WMM index on DBDC cardsFelix Fietkau
WMM index range needs to be split between both PHYs if a second PHY exists. The condition for that was accidentally written as checking if the vif PHY is the secondary one Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: introduce bss coloring supportLorenzo Bianconi
Introduce mcu APIs to configure bss coloring and to report bss coloring collisions. Add support to report coloring countdown in beacon sent by the device. Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: remove mt7915_sta_statsRyder Lee
mt7915_sta_stats is no longer needed after tx rate reworking. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: report tx rate directly from tx statusRyder Lee
Report tx rate from tx status packets instead of receving periodic mcu event. This improves flexibility, accuracy and AQL performance, and simplifies code flow for better readability. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: mt7915: fix calling mt76_wcid_alloc with incorrect parameterBo Jiao
It will cause maximum connectable STA to be one less when calling mt76_wcid_alloc with parameter MT7915_WTBL_STA - 1. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: drop the use of repeater entries for station interfacesFelix Fietkau
There are firmware or hardware issues, which are currently causing tx hangs when attempting to use these interfaces Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: add .offset_tsf callbackRyder Lee
It's much more accurate than .get_tsf + .set_tsf, and switch to use mt76_rmw to operate tsf registers. Tested-by: Xing Song <xing.song@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19mt76: mt7915: add .set_bitrate_mask() callbackRyder Lee
Add runtime configuration for bitrate mask. This update firmware rate control to add a boundary on top of table to limit the rate selection for each peer, so when user set bitrates vht-mcs-5 1:9, which actually means nss = 1 mcs = 0~9. This only applies to data frames as for other mgmt, mcast, bcast still use legacy rates as it is. Note that driver does not support GI configuration. Example: iw dev wlan0 set bitrates vht-mcs-5 1:9 he-mcs-5 2:7 iw dev wlan0 set bitrates legacy-5 6 he-mcs-5 2:0-11 Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: rework the flow of txpower settingShayne Chen
Clean up the flow of per-rate txpower limit setting to get rid of duplicate work since it has already been handled by firmware, and set proper max_power based on different channels and regdomains. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-24 17:31:26 +0000